This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
document.xls 文档密级
04/09/2023 华为机密,未经许可不得扩散 第1页,共928页
RNCV200R009
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.
Huawei Technologies Co., Ltd.Address: Huawei Industrial Base
Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
NoticeThe information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.
Huawei Technologies Co., Ltd.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
document.xls 文档密级
04/09/2023 华为机密,未经许可不得扩散 第4页,共928页
Purpose
This describes NodeB parameters, including the meaning, values, and usage of NodeB parameters.
Version
The product version related to this document is: V200R011C00SPC110
Each parameter is described in the following aspects.
Description
Parameter ID
Parameter Name
NE
MML Command
Description
Value Type
GUI Value Range
Actual Value Range
Unit
Default Value
Recommended Value
Impact
Parameter Relationship
Access
document.xls 文档密级
04/09/2023 华为机密,未经许可不得扩散 第5页,共928页
Service Interrupted During Modification
Interruption Scope
Interruption Duration (Min)
Caution
Validation of ModificationImpact on Radio Network PerformanceIntroduced in Version
Attribute
document.xls 文档密级
04/09/2023 华为机密,未经许可不得扩散 第6页,共928页
This describes NodeB parameters, including the meaning, values, and usage of NodeB parameters.
The product version related to this document is: V200R011C00SPC110
RemarksA simple string for uniquely identifying a parameter
The full name of the parameter
Net Elements which the parameter is set
The definition, function, and the reference protocol of the parameter
The data type of parameter value: integer, enumeration, and so on
The actual value. For example, if the GUI value is 0, the actual value is OFF.
The unit of parameter value
The initial value specified by the systemRecommended values in different situations
The affected range upon modifying the value, such as RAB, IPPATH, CELL
Whether this parameter is read/write,read only,or internal.
All the commands that use the parameter; optional/mandatory attribute of the parameter in each command
The value range on the MML interface; the definition and the applied situations for enumeration values
The restriction and relation with other parameters, such as, the switches to active the parameter and the value of related parameters
document.xls 文档密级
04/09/2023 华为机密,未经许可不得扩散 第7页,共928页
Modifying the parameters leads to service interruption?
The scope where the services are interrupted
The approximate duration of service interruption, in the unit of minute
Cautions to be taken during the modification
The way that you can take it effect.Impact on Radio Network PerformanceThe version that the var appear firstly.Whether this parameter is a radio parameter,a transport parameter,or an equipment parameter.
document.xls 文档密级
04/09/2023 华为机密,未经许可不得扩散 第8页,共928页
Parameter ID Parameter Name NE MML Command
128KRSCLMT NodeB SET RSCLMTPARA(Optional)
16KRSCLMT NodeB SET RSCLMTPARA(Optional)
16QAMSW 16QAM Switch NodeB SET MACHSPARA(Optional)
AC Upper Limit of the NPMU AC/DC Voltage Alarm Threshold
AC Lower Limit of the NPMU AC/DC Voltage Alarm Threshold
Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link.
BootpTime. The Bootp Time starts when the OMCH is abnormal.
AG Threshold. If the UE-expected authorized value is equal to or great than the active authorized value plus this threshold value, authorize the UE through the AG channel. Otherwise, authorize the UE through RG channel; It may affect the rate of HSUPA.
Alarm ID Interval Type 1~32000
Alarm ID Select Type Enumeration Type
Alarm ID Interval Type 65334~65535
Enumeration Type
Enumeration Type
ALL(All of alarm ID), ONEBYONE(One by one alarm ID)
Binding Route. When the remote maintenance IP address and local maintenance IP address are in different network segments, the binding route should be set. It indicates whether to bind a route.
NO(not bind a route), YES(bind a route)
Cabinet No. of Antenna Channel1: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
Enumeration Type
Enumeration Type
Interval Type 20~254
Enumeration Type
It is the No. of the first antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)
It is the Antenna No. of the first antenna connector;
ANTA(No.A Ant of Power Amplifier), ANTB(No.B Ant of Power Amplifier)
Subrack No. of Antenna Channel1: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
Cabinet No. of Antenna Channel2: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
Enumeration Type
Enumeration Type
Interval Type 20~254
Enumeration Type
It is the No. of the second antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)
It is the Antenna No. of the second antenna connector;
ANTA(No.A Ant of Power Amplifier), ANTB(No.B Ant of Power Amplifier)
Subrack No. of Antenna Channel2: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
Cabinet No. of Antenna Channel3: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
Enumeration Type
Interval Type 20~254
Enumeration Type
Enumeration Type
It is the No. of the third antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)
Subrack No. of Antenna Channel3: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
Cabinet No. of Antenna Channel4: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
It is the No. of the fourth antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)
Interval Type 20~254
Enumeration Type
BER Threshold Enumeration Type
Subrack No. of Antenna Channel4: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
It refers to the magnitude of antennas in the sector. Do not use it when Sector Type is Distributed Sector.
1E-3(E1/T1 high bit error rate threshold 1E-3), 1E-4(E1/T1 high bit error rate threshold 1E-4), 1E-5(E1/T1 high bit error rate threshold 1E-5), 1E-6(E1/T1 high bit error rate threshold 1E-6)
Antenna Line Device (ALD) System Type Enumeration Type
Alarm Type Value Enumeration Type
Battery Auto Test Mode Enumeration Type
Value of the WRFU/RRU RX Attenuation Interval Type 0, 4~22
Interval Type 100~65535
TMA12DB_ONLY_NON_AISG (Only TMA 12dB (NON_AISG)), TMA24DB_ONLY_NON_AISG (Only TMA 24dB (NON_AISG)), RET_ONLY_COAXIAL (Only RET (COAXIAL)), RET_ONLY_MULTICORE (Only RET (MULTICORE)), TMA12DB_AISG (12dB TMA and RET or Only TMA 12dB (AISG)), TMA24DB_AISG (24dB TMA and RET or Only TMA 24dB (AISG)), CUSTOM (Custom)
WATER (water immersion), SMOKING (smoking), INFRARED (infrared), GATING (door control)
PERIOD (Period Auto Test), POWERCUT (Power Cut Auto Test), PERIODPOWERCUT (Period and Power Cut Auto Test), NOAUTOTEST (No Auto Test)
Timer_CC, which indicates the length of the SSCOP timer Timer_CC specified in the SAAL-related protocol.
SSL Handshake Authentication Mode Enumeration Type
Auto Touchoff Switch Enumeration Type ON, OFF
Enumeration Type
NEMU Dedicated Boolean Alarm Voltage Enumeration Type
Clock Mode. If this parameter is not specified, the original value is kept.
MASTER(Master), SLAVE(Slave)
HIGH (High), LOW (Low)
HIGH (Alarms at high impedance), LOW (Alarms at low impedance)
Frequency Band Enumeration Type No, Yes
Base station ID String Type None
Base station ID String Type None
Battery Capacity Interval Type 5~600
Boost-Charging Duration Interval Type 30~240
Battery Current Limiting Coefficient Any Type 0.05~0.25
Environment Mode Enumeration Type INNER, OUTER
Interval Type 40~79
Interval Type -19~5
Boost-Charging Voltage of the NPMU Any Type 43.2~57.6
Over-temperature alarm threshold of battery temperature
Under-temperature alarm threshold of battery temperature
Beamwidth Range Type 0~255
Beamwidth Range Type 0~255
Beamwidth Range Type 0~255
Beamwidth Range Type 0~65535
Beamwidth Range Type 0~65535
Beamwidth Range Type 0~65535
Beamwidth Range Type 0~65535
Interval Type 0~1000Discard Rate. The link is not congested when the frame loss ratio is lower than or equal to this threshold.
IP Address Type -
IP Address Type -
Excessive Burst Size Interval Type 0~155000
Antenna Bearing Range Type 0~65535
Battery Overtemperature Shutdown Flag Enumeration Type
Link Backup Mode (For Ring Topology Only) Enumeration Type COLD, HOT
Interval Type 0
Enable Switch Enumeration Type
Destination IP Address. This parameter must meet all the following conditions: The IP address must be the one of legal A, B, or C type, excluding the default route (IP address 0.0.0.0). The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".
Destination IP Mask. This parameter must meet all the following conditions: The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".
DISABLE(Disable), ENABLE(Enable)
Number of the Sub-Board of the E1/T1 Routine Test
DISABLE(Disable), ENABLE(Enable)
Interval Type 0~8First Break Point Position of the RRU Chain/Ring
Interval Type 0~8
Enable Switch Enumeration Type
Battery Shutdown Flag Enumeration Type
Battery Shutdown Voltage Any Type 35.0~55.6
Interval Type 0~100
Second Break Point Position of the RRU Chain/Ring (For Ring Topology Only) If it is not specified, it equals to the value of the first break point position.
DISABLE(Disable), ENABLE(Enable)
DISABLE(Disable), ENABLE(Enable)
Frame Error Rate AppearThreshold of FE MAC Layer
Added Board Type Enumeration Type
Activated Board Type Enumeration Type
Battery Shutdown Temperature Interval Type 40~70
Interval Type
NEMU (NE Environment Monitoring Unit), NFAN (NodeB FAN Box), WMPT (WCDMA Main Processing & Transmission unit), UTRP (Universal extension TRansmission Processing unit), WBBPa (WCDMA BaseBand Process unit type A), WBBPb (WCDMA BaseBand Process unit type B), UPEA (Universal Power and environment Interface Unit A), UPEB (Universal Power and environment Interface Unit B), UEIU (Universal environment Interface Unit).
HBBU/HBBUC, MRRU, RHUB, PRRU
Number of the Carrier in the Initial RTWP Adjusting
0~1(2 carrier RRU), 0~3(4 carrier RRU)
Antenna Line Device Scenario Enumeration Type
Interval Type 0~100
Enabled State of the SSL Certificate Chain Enumeration Type
Enumeration Type
Enumeration Type
Name of the SSL Certificate Chain File String Type None
REGULAR (Regular Installation Scenario: One RET antenna connects to one antenna connector for signal transmission), SECTOR_SPLITTING (Sector Splitting Scenario: A number of RET antennas transmit signals to cover one cell in which the single sector is logically divided into multiple sub-sectors), DAISY_CHAIN (Antenna Cascaded Scenario: A number of RET antennas are sequentially connected to a single cable), 2G_EXTENSION (2G Extension Scenario: Control the RET antennas of 2G networks by NodeB)
Frame Error Rate DisappearThreshold of FE MAC Layer
DISABLE(Disable), ENABLE(Enable)
A flag, which indicates whether the OM channel is the master one or the slave one.
MASTER(Master Channel), SLAVE(Slave Channel)
FPMUX Switch, which is a switch to enable or disable FP multiplexing.
Fault Handling Mode for Failure in Running the Batch Command Files
BEST_EFFORT (Best effort), BREAK_ON_FAILURE (Break on failure)
COMPRESSED, UNCOMPRESSED
Number of the RX Channel in the Initial RTWP Adjusting
Value of the Change Time in Starting the RTWP Routine Test
Type of the Channel in Setting the SASU Gain
BS (Channel of BS), UMTS (Channel of UMTS)
Frame Max Length, which indicates the maximum length of the FP, without the IP/UDP header after multiplexing.
Timer_Idle. Length of the SSCOP timer Timer_Idle specified in the SAAL-related protocol. The value of this parameter should be larger than or equal to the value of KATM.
Interface Number Interval Type 0~15
Interface Type Enumeration Type
E1 or T1 line Impendance Enumeration Type
Clock Source Type of the NodeB Enumeration Type
PPP(PPP), MPGRP(MLPPP GROUP)
75(the line workmode is E1), 120(the line workmode is E1), 100(the line workmode is T1)
IP Address. The local IP cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.
IP Address Type -
CQI Filter Alpha of HSDPA Interval Type 0~99
Name of the Cancelled List File String Type None
Enable State of the Cancelled List File Enumeration Type
Enumeration Type
Cold Start Load Shutdown Flag of the NEMU Enumeration Type ENABLE, DISABLE
Interval Type -40~0
Flag for Setting the CM Control Switch Enumeration Type
Current DA Interval Type 255~65520
DA Interval Type 255~65520
Installation Date Interval Type 1~31
Local IP Address. The local IP address cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.
DISABLE(Disable), ENABLE(Enable)
State Indicating Whether the RRU is Connected to an Auxiliary Power SystemState Indicating Whether the CMU is configured
CONFIGED (Configed), NOTCONFIGED (Not Configed)
Cold Start Load Shutdown Temperature of the NEMU
ON(turnon), OFF(turnoff)
Start Time Compound Type Format: YYYY&MM&DD
Lasting days Interval Type 0~65535
Interval Type 0~30
Destination Cell ID Interval Type 0~65535
The First Destination Cell ID Interval Type 0~65535
The Second Destination Cell ID Interval Type 0~65535
SASU DC Load Interval Type 0~65535
Dead Band of the NCMU Heat Control Delta Parameter
SASU DC Switch State Enumeration Type
Any Type 58.0~60.0
Any Type 35.0 ~ 55.6
Delayed Discharge Test Time Interval Type 1~60
Interval Type 10~100
BS (Supplied by BS), UMTS (Supplied by UMTS), OFF (OFF)
DC Upper Limit of the NPMU AC/DC Voltage Alarm Threshold
DC Lower Limit of the NPMU AC/DC Voltage Alarm Threshold
Default Power Level; use it when Sector Type is Distributed Sector.
Join Resource Group Enumeration Type
Interval Type 100~65534
Device Type Enumeration Type
Device Type Enumeration Type
Type of the Antenna Line Device (ALD) Enumeration Type
AISG Protocl Version Enumeration Type V1.1, V2.0_3GPP
Destination FACH Channel ID Interval Type 0~255
DISABLE(Not Join in Transmission Resource Group), ENABLE(Not Join in Transmission Resource Group)
Timer_Keep_Alive. Length of the SSCOP timer Timer_Keep_Alive specified in the SAAL-related protocol.
The First Destination FACH Channel ID Interval Type 0~255
The Second Destination FACH Channel ID Interval Type 0~255
IP Address Type -
Interval Type -
TX Diversity Mode of Sector Enumeration Type
Interval Type 0~1000
Interval Type 0~1000
Local IP Address. The local IP address can be 0.0.0.0. If the local IP address is not 0.0.0.0, it should belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x.
To match the uplink coverage capability with the downlink coverage capability, desensitization is applied to reduce the sensitivity of the receiver manually by adding proper noise to received signals; if the desensitization intensity is set to 0, the desensitization is not applied.
COMMON_MODE(Common Mode), HALFFREQ(0.5/0.5 Mode)
It refers to the downlink delay of the first antenna channel.
It refers to the downlink delay of the second antenna channel.
Interval Type 0~1000
Interval Type 0~1000
DL Frequency Channel Number Interval Type 0~65535
It is the No. of the dllink resource group. Interval Type 0~3
It is the No. of the downlink resource group. Interval Type 0~3
IP Address Type -
It refers to the downlink delay of the third antenna channel.
It refers to the downlink delay of the fourth antenna channel.
Local IP Address. The local IP address should belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The parameter cannot be equal to the other SCTP link IP address. The parameter must be the active interface address of this board.
0.05C10 Discharge Time Any Type -
0.1C10 Discharge Time Any Type 0.01~50.01
0.2C10 Discharge Time Any Type 0.01~50.01
0.3C10 Discharge Time Any Type 0.01~50.01
0.4C10 Discharge Time Any Type 0.01~50.01
0.5C10 Discharge Time Any Type 0.01~50.01
0.6C10 Discharge Time Any Type 0.01~50.01
0.7C10 Discharge Time Any Type 0.01~50.01
0.8C10 Discharge Time Any Type 0.01~50.01
0.9C10 Discharge Time Any Type 0.01~50.01
IP Address Type -
Enumeration Type -
String Type None
IP Address Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0".
Daylight Saving Time Flag (If it is not specified, the DST settings do no change.)
Valid absolute path of the destination on FTP SERVER, not including the file name
IP Address Type -
Interval Type -
Interval Type 3~65535
Interval Type 1~65535
Interval Type 1~100
Destination Port No. Range Type 0~7
Local IP Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0".
Max Connection Control Count, which indicates the maximum number of connections or releases specified in SAAL-related protocol, that is the maximum permitted number of retransmissions
Max STAT Count, which indicates the maximum number of list elements in STAT PDU specified in SAAL-related protocol. It must be an odd number.
Max Poll Data Count, which indicates the maximum number of times of polling data transmissions specified in SAAL-related protocol.
Discharge Test Time Limit of the Battery Capacity Test
Destination Fraatm Link No. Range Type 0~7
Destination Port No. Range Type 0~7
Destination Port Type Enumeration Type
Min Cell Rate Interval Type
Destination Subboard Type Enumeration Type
Destination Subboard Type Enumeration Type
Destination Slot No. Range Type 0~7
IMA(Bearing Port Type is IMA), UNI(Bearing Port Type is UNI), FRAATM(Bearing Port Type is FRAATM)
The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;
BASE_BOARD(base board)
E1_COVERBOARD(E1/T1 cover board)
Destination Slot No. Range Type 0~7
Destination Subrack No. Range Type 0
Bearing Mode Enumeration Type ATM, IPV4
IP Address Type -
Interval Type 101~65535
Refers to OM priority Interval Type 0~63
Enumeration Type OPEN, CLOSE
Next Hop IP. A valid IP address must satisfy all the following conditions:Legal A/B/C type IP address. IP address can not be 0.0.0.0 and 255.255.255.255.
Timer_No_Response. Length of the SSCOP timer timer Timer_No_Response specified in the SAAL-related protocolIt.
Dynamic Code Resource Distribuiton Switch of HSDPA
E-AGCH power control policy Enumeration Type
Enumeration Type NO, YES
Interval Type -350~150
Interval Type 0~255
Peak cell rate of ATM channel. Interval Type
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH), CQI_BASED (Dynamic transmit power control based on CQI), HSSCCH_BASED (Dynamic transmit power control based on HS-SCCH)
Whether to set the E-AGCH power control parameters or not
This parameter specifies the power offset of the E-AGCH from the power of the Common Pilot Channel.
E-AGCH Power Offset; An offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;
End Date of the E1/T1 Routine Test Compound Type None
End Date of the Daylight Saving Time Interval Type 1~31
Battery Charge Efficiency Interval Type 80~100
Effect Signal Enumeration Type
End Mode of the Daylight Saving Time Enumeration Type
End Month of the Daylight Saving Time Enumeration Type
Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask.
Peer IP Mask. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask in binary allows no "0" before "1" or "1" after "0".
End Time of the Daylight Saving Time (At a Non-DST).
End Time of the E1/T1 Routine Test Compound Type None
End Week of the Daylight Saving Time Enumeration Type
Enumeration Type
Float-Charging Voltage of the NPMU Any Type 43.2~57.6
Peer UDP Port is one of the parameters between NodeB and RNC.
Interval Type 0~100
Interval Type 100~65534
Download Configuration File Enable Flag Enumeration Type
MPT Backup Flag Enumeration Type ENABLE, DISABLE
RRU Installation Floor Interval Type -100~1000
Route Preference Interval Type 1~255
Enumeration Type
Resource Group ID Interval Type 0~3
Packet Loss Rate Disappearing Threshold, and its value shall not be larger than the PLRAT value.
Timer_Poll. Length of the SSCOP timer Timer_Poll specified in the SAAL-related protocol.
DISABLE(Disable), ENABLE(Enable)
Priority Rule, according to the precedence in the TOS field or the DSCP field
IPPRECEDENCE(According to the precedence value in the TOS field), DSCP(According to the DSCP value in the TOS field)
Route type option Enumeration Type
Rx Bandwidth of this resource group Interval Type 32~15800
Sustain Cell Rate Interval Type
Sustain Cell Rate Interval Type
Interval Type 0~63
NEXTHOP(IP address of the next hop), IF(Out port)
The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;
The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;
Signaling priority. IPPRECEDENCE: 0 (lowest) and 7 (highest) DSCP: 000000 (for default PHB) and XXX000 (for Class-Selector PHB), where X is 0 or 1. The service level is consistent with the IP Precedence in the existing network. For Expedited Forwarding PHB, DSCP is 101110. For Assured Forwarding PHB, four service levels (bandwidth and buffer size) and three packet discard priorities are listed here.
Enumeration Type
TMA Gain Interval Type 0~255
Antenna Gain Range Type 0~255
Antenna Gain Range Type 0~255
Antenna Gain Range Type 0~255
Antenna Gain Range Type 0~255
GPS Cable Delay Interval Type 0~1000
Number of the Head Cabinet Enumeration Type
Two Tx Way of the Local Cell Enumeration Type
Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR(Unspecified Bit Rate), UBR_PLUS(Unspecified Bit Rate+)
MASTER(Master cabinet)
FALSE (Not Support), TRUE (Support)
Enumeration Type
Humidity Lower Limit Interval Type 5.00~95.00
Local Cell Inner Handover Radius Interval Type 0~200000
Interval Type
Slot Number of the Head Interface Board Interval Type 2~3
Number of the Head Subrack Interval Type 0
Interval Type -99~70
High Speed Movement Mode of the Local Cell
FALSE (Not Support), TRUE (Support)
Optical Port Number of the Head Interface Board
0~2(WBBPa), 0~5(WBBPb)
High Temperature Critical Point of the NCMU Heat Control Delta Parameter
Interval Type -99~40
Interval Type 0~30
Heater Close Temperature of the NCMU Heater Parameter
High Temperature at the Delta Air Outlet of the NCMU Heat Control Delta Parameter
Heater Start Temperature Interval Type -99~40
Humidity Upper Limit Interval Type 5.00~95.00
Horizontal Position of the RRU Interval Type 0~1000
Enumeration Type
Interval Type 1~1023
Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR_PLUS(Unspecified Bit Rate+), UBR(Unspecified Bit Rate)
Sub Frame Max Length, which indicates the maximum length of the FP before multiplexing. The FP can be multiplexed only when its frame length is smaller than this value.
Flow Control Switch Enumeration Type
Enumeration Type
Interval Type 0~100
Interval Type 1~20
Transmission Link Fault Recover Switch Enumeration Type
WRFU/RRU IF Offset Indicating the Direction of IF Filter.
BOTTOM (Offset to bottom, that is, offset to the minimum value (The interference signal frequency is greater than or equal to the current receive frequency.)), MIDDLE (Offset to middle, that is, there is no offset (no interference).), TOP (Offset to top, that is offset to the maximum value (The interference signal frequency is smaller than the current receive frequency.)), MINUS_50M (Only 4 carrier RRU support), PLUS_50M (Only 4 carrier RRU support), MINUS_75M (Only 4 carrier RRU support), PLUS_75M (Only 4 carrier RRU support).
Time Delay. The link is not congested when the delay is lower than this threshold.
This parameter indicates the duration of Timer.
DISABL(Disabl), ENABLE(Enable)
Tx Clock Enumeration Type
Bearing VCI Interval Type 32~511
Interval Type 0~3
Bearing VPI Interval Type 0~255
Committed Burst Size Interval Type 32~155000
Installation Date String Type None
Installer's ID String Type None
Interval Type
RECOVEDRX(the clock recovered from optical signals received by the receive end), EXT8K(external 8kHz clock transmitted from NMPT to NUTI)
Analog Port Number of the NEMU Standby Analog Value Input Parameters
Committed Information Rate, which is related to a specific physical interface but lower than the physical interface rate.
ETH:32~100000MPGRP:32~31744ETHTHK:32~100000
Interval Type
Enumeration Type FULL(Full-Duplex)
IP Address of the NTP Server IP Address Type None
IP address of the FTP Serve IP Address Type None
Enumeration Type
Enumeration Type
Committed Information Rate, which is related to a specific physical interface but lower than the physical interface rate.
ETH:32~100000MPGRP:32~31744ETHTHK:32~100000
Duplex. Interface duplex mode. The value can be forced full-duplex. If the value is null, the duplex mode is not modified.
Frame Structure. If this parameter is not specified, the original value is kept.
E1_DOUBLE_FRAME (Double framtype for E1), E1_CRC4_MULTI_FRAME (CRC4 Mutipiy framtype for E1), T1_SUPER_FRAME (Super framtype for T1), T1_EXTENDED_SUPER_FRAME (Extended Super framtype for T1)
Function. DISABLE means disabling the LR settings on the port. ENABLE means enabling the LR settings on the port.
DISABLE(Disable the LR settings on the port), ENABLE(Enable the LR settings on the port)
Enumeration Type
Enumeration Type
Auto or Manual IP Clock Synchronization Mode
AUTO(Auto), MANUAL(Manual)
This parameter indicates whether to add the VLAN tag. DISABLE means not adding the VLAN tag, and ENABLE means adding the VLAN tag.
Load Overtemperature Shutdown Flag Enumeration Type ENABLE, DISABLE
Interval Type 15~30
Any Type 36.00~43.00
Lower Alarm Occur Limit Any Type None
NOLOOP (loopback mode is cancelled.), LOCAL (Local end loopback, which means that data goes through a loop within a NodeB instead of through E1 cables. It is used to check whether the transmission chips are normal..), REMOTE (Remote loopback, which means that data goes through a loop of E1 cables between NodeB and RNC. it is used to check whether the E1 cables are normal.)
NOLOOP (No loop), ALL (ALL IP Address), IPADDR (Appointed IP Address), IPADDRADDUDPPORT (Appointed IP Address and UDP port No.)
Automatic Alarm Handling Limit After the VSWR Alarm
Lower Threshold of the Input Voltage Alarm of the NEMU
Loopback Mode Enumeration Type
Enumeration Type
Enumeration Type
Loopback Time Range Type 1~60
NOLOOP (loopback mode is cancelled.), REMOTE (Remote loopback, which means that data goes through a loop of fibers betweenNodeB and RNC/BSC. it is used to check whether the fibers are normal.), LOCAL (Local end loopback, which means that data goes through a loop within a NodeB instead of through fibers. It is used to check whether the transmission chips are normal.)
Line Code. If this parameter is not specified, the original value is kept.
HDB3(HDB3 code for E1), AMI(AMI code for E1or T1)
Line Code. If this parameter is not specified, the original value is kept.
AMI(AMI code for E1or T1), B8ZS(B8ZS code for T1)
IP Address Type -
Scramble Mode Enumeration Type
Enumeration Type
IP Clock Link Number Interval Type 0~1
Interval Type 0~63
Enumeration Type
VLAN Group No. Interval Type 0~3
Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask.
ENABLE(Scramble, it must be ENABLE, when E1/T1 adopts AMI mode), DISABLE(No scramble)
Speed mode. The value can be forced 10 Mbps, forced 100 Mbps, or auto-negotiated. It must be consistent with the peer IP interface. If the value is null, the speed is not modified. Value range: 10M (Forced 10 Mbps), 100M (Forced 100 Mbps), AUTO (Auto-negotiation).
This parameter indicates the DSCP priority of the user data.
Traffic Type, including user data, OM, SIG, and other types.
USERDATA (USERDATA), SIG (SIG DATA), OM (Maintenance DATA), OTHER (OTHER)
Local Cell ID Interval Type 0~268435455
VLAN ID Interval Type 1~4094
Interval Type 0~7
Interval Type 46~1500
Interval Type 0~255
Load Shutdown Flag of the NEMU Enumeration Type ENABLE, DISABLE
Load Shutdown Voltage Of NEMU Any Type 35.0~55.6
Address & Control Field Compress Enumeration Type DISABLE, ENABLE
VLAN Priority, which indicates the priority level of VLAN
Maximum number of transmission units. It is the maximum length of the IP packets on the port. If this parameter is not specified, the MTU is not modified.
Minimum value of the timer for disabling the cell transmitter
Interval Type -99~70
Load Shutdown Temperature Interval Type 55~70
Low Temperature Threshold of the NCMU Interval Type -40~10
Manual Touchoff Switch Enumeration Type ON, OFF
Low Temperature Critical Point of the NCMU Heat Control Delta Parameter
Any Type
ATM Address Any Type
Adjacent Node ID Interval Type 0~31
E-AGCH Max Power Interval Type -350~150
Authentication Enumeration Type
Enumeration Type ENABLE, DISABLE
Enumeration Type ATM, IPV4
Max RRU Output Power Interval Type 0~500
ATM Address, a hexadecimal string of 40 characters (excluding H').
A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
Auto Switch to Master Address. When the master address is restored, the service can be switched to the master address automatically.
NCP/CCP Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link.
Resource Group Bearing Type Enumeration Type IPV4
Enumeration Type ATM, IPV4
Cell Delay Variation Tolerance Interval Type 1024~13300000
IP Address Type -
Enumeration Type
E-AGCH Min TX Power Interval Type -350~150
Range Type 0~65535
Statistic Periods Interval Type 0~65535
Any Type 0~4294967295
NCP/CCP Port Type Enumeration Type
SASU Mode Enumeration Type
TMA Mode Enumeration Type
Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link.
Client IP Address, which must be the IP address of ETHPORT.
For the different links in a group may go through different transmission network, the links may use the different synchronize source. In this case, the clock mode of the IMA group should be ITC.
Diff Max Delay. The links in an IMA group go through different tranmission lines, which introduces different transmission delays and causes relative delay variation between the links (known as Link Differential Delay). When the Link Differential Delay exceeds the capacity setting, the LODS alarms related to the link are reported.
The identifier, the parameter can not include the letters of '<', '>', '?', '!', ''', '\' and '"'.
DHCP Server IP Address IP Address Type -
Interval Type 0~63
IP Address Type -
Any Type 0~4294967295
IP Address Type -
Interval Type 0~500
Interval Type 1~100
NodeB Name String Type None
Differentiated Services Code Point. Refer to [MML]SET DIFPRI[/MML].
Destination IP Address. This parameter must meet all the following conditions: The IP address must be the one of legal A, B, or C type, excluding the default route (IP address 0.0.0.0). The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".
Measurement Upper Limit of the NEMU Standby Analog Value Input Parameters
Destination IP Mask. This parameter must meet all the following conditions: The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".
The maximum transmit power of the local cell is the maximum output power at the antenna connector on the cabinet top. The value must stay within the value range supported by the power amplifier; otherwise, the local cell is unavailable.
Every HSDPA user will limit the power configured by the parameter value.
Name of the SASU Which Needs Setting String Type None
String Type None
String Type None
String Type None
Destination Resource Group ID Interval Type 0~3
Name of the RET Antenna of Which the Downtilt Needs Setting
Device Name of the Antenna Line Device (ALD)
Device Name of the Smart Tower-Mounted Amplifier (STMA)
Enumeration Type
Destination Port VCI Interval Type 32~511
Destination Port VPI Interval Type 0~255
Enumeration Type
Enumeration Type
Fraatm Link No. Interval Type 0~7
Destination E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. If a timeslot is selected, it indicates that the timeslot is used; otherwise, it indicates that the timeslot is not used.
E-HICH power control policy for non-service radio link set
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)
Whether to set the E-HICH power control parameters for non-service radio link set or not
This parameter specifies the power offset of the E-HICH non-serving RLS from the power of the Common Pilot Channel.
E-HICH Power Offset for Non-service Radio Links Set. An offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
E-RGCH power control policy for non-service radio links
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)
Whether to set the E-RGCH power control parameters for non-service radio links or not
This parameter specifies the power offset of the E-RGCH non-serving RL from the power of the Common Pilot Channel.
E-RGCH Power Offset for Non-service Radio Links; an offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
Interval Type 100~1031
Frame Mode Enumeration Type
Interval Type 0~30
Interval Type 0~30
Frame Max Length, which indicates the maximum length of the FP, without the IP/UDP header after multiplexing.
FRAMEMODE_SONET(The optical port work in SONET OC-3 mode), FRAMEMODE_SDH(The optical port work in SDH STM-1mode)
Normal Temperature at the Delta Air Inlet of the NCMU Heat Control Delta Parameter
Normal Temperature at the Delta Air Outlet and Inlet of the NCMU Heat Control Delta Parameter
Object Alarm ID Interval Type 1~32000
Object Number Interval Type 0~254
Type of Objects Needed Shielding Enumeration Type
Interval Type 0~1000
Enumeration Type
On/Off Status of the Environment Devices Enumeration Type ON, OFF
Interval Type 0~1000
Operating Sort Enumeration Type DEV, OPE
ALL(ALL), BRD(Board), E1/T1(E1/T1), E1/T1OnChannelsSubbrd(E1/T1 On Channels Subboard)
Overcurrent Alarm Clearance Threshold of the Antenna Line Device (ALD)
Tx Frame Length. A longer Tx Frame Length brings about more efficient data transmission but lower sensitivity to data transmission errors. The default value is recommended.
IP Address. The local IP cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.
IP Header Compress. DISABLE means that the IP header is not expected to be compressed from the peer end. ENABLE means that the UDP/IP header is expected to be compressed from the peer end.
DISABLE(The IP header is not expected to be compressed from the peer), ENABLE(The UDP/IP header is expected to be compressed from the peer)
Local IP Mask. If the IP mask is 0.0.0.0, it indicates that the IP mask must be negotiated; if the IP mask is not 0.0.0.0, the following conditions must be met: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask in binary does not allow "0" before "1", or "1" after "0".
DISABLE(Not Join in Transmission Resource Group), ENABLE(Not Join in Transmission Resource Group)
No. of the SAAL link where the CP is located.
SCTP Link No. Interval Type 0~19
Interval Type 0~63
IP Address Type -
Interval Type 0~7
Enumeration Type
Interval Type 1024~65535
IP Address Type -
Port Number of the E1/T1 Routine Test Interval Type 0~7
No. of the SAAL link where the AAL2 node is located.
Local IP Address. The parameter must meet all the following conditions: The local IP address can be 0.0.0.0. If it is not 0.0.0.0, the IP address is of legal A, B, or C but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. If the IP address is 0.0.0.0, it indicates that the IP address must be negotiated; if the IP address is not 0.0.0.0, it cannot be the same as the peer IP address.
Port Number of the RHUB Where the Pico RRU is Located
Password Enabled State of the Private Key File
DISABLE(Disable), ENABLE(Enable)
Local SCTP Port, which is one of the parameters between NodeB and RNC.
IP Address Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0".
NEMU Port Number Interval Type 0~5
NPSU Number Interval Type 1~3
Alarm Port Number Interval Type 0~35
Port No. Range Type 0~7
Port No. Range Type 0~7
Bearing Port No. Range Type 0~7
Bearing Fraatm Link No. Range Type 0~7
Fraatm Link No. Range Type 0~7
Fraatm Link No. Range Type 0~7
Max Burst Size Interval Type 3~10000
Interval Type 21~65535
Enumeration Type
Min Cell Rate Interval Type
Port Number of the FTP Server Providing the FTP Services
Multi Class PPP. DISABLE means not using MCPPP; ENABLE means using MCPPP.
DISABLE(not use MCPPP), ENABLE(use MCPPP)
The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;
Min Cell Rate Interval Type
Interval Type 1~8
Interval Type 0~100
Name of the Private Key Certificate File String Type None
RRU Position in the Chain Interval Type 0~7
The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;
Min Number of Links Activated, which is a threshold indicating the available status of IMA group. For example, if this parameter is set to 3 and the number of activated IMA links in an IMA group is larger than or equal to 3, then the IMA group is available. If the number of activated IMA links in the group is smaller than 3, then the IMA group is unavailable.
MLPPP Packets Discard Alarm Appear Threshold
Enumeration Type R0A, R0B, RET_PORT
NodeB Power Supply Type Enumeration Type
Port Type Enumeration Type
Auxiliary Power System Type Enumeration Type
Name of the Public Key Certificate File String Type None
Interval Type 0~100
Private Key Password Password Type None
Power Supply Port of the Antenna Line Device (ALD)
Mode of RRU used in this local cell; if Sector Type is Distributed Sector, just use the sector type; if the mode is SYNC, the local cell uses all the RRUs in the sector where the local cell is; if the mode is UNSYNC, the local cell uses specified RRUs.
UNSYNC (use part of the sector RRUs), SYNC (use all of the sector RRUs)
CODE_PRI(Code Priority:refers to power limited cell), POWER_PRI(Power Priority:refers to code limited cell), POWERCODE_BAL(Balance between Code and Power)
Next Hop IP Address. A valid IP address must meet all the following conditions:The IP address is of legal A, B, or C type. The IP address cannot be 0.0.0.0 or 255.255.255.255.
Next Hop IP. A valid IP address must satisfy all the following conditions:Legal A/B/C type IP address. IP address can not be 0.0.0.0 and 255.255.255.255.
Resource Limiting Switch of HSDPA Enumeration Type
Enumeration Type
Tscross No. Interval Type 0~15
Tree link PVC No. Interval Type 0~65535
RRU Type Enumeration Type
IP Address Type -
Value of the RTWP Initial Adjusting Interval Type -130~130
Node Type Enumeration Type
OPEN (OPEN), CLOSE (CLOSE)
NodeB Resetting Mode After the Download of the Configuration File
NodeB IP Address, which indicates the NodeB IP address of the IP port. It can be classified into the following types: When the NodeB IP address is configured by the link Layer, the configured address can be used. When the DEVIP is configured, the DEVIP address can be used.When the NodeB IP address is obtained by the link layer negotiation, the negotiated address cannot be used but can be configured as 0.0.0.0.
LOCAL(End Node), HUB(Switching Node)
Resource Allocate Rule of Baseband Enumeration Type
Node Type Enumeration Type
Index of the WRFU/RRU RX Channel Interval Type 0~1
RX Unit Number of the WRFU/RRU Interval Type 0~1
RX Unit Switch of the WRFU/RRU Enumeration Type
Enumeration Type DISABLE, ENABLE
IP Path ID Interval Type 0~65535
AAL2 Path ID Interval Type 1~4294967295
Peak cell rate of ATM channel Interval Type
Status of the Sub-Board Enumeration Type
Sub-Board Type Enumeration Type
PERFFIRST (Handover performance first mode), CAPAFIRST (Capacity first mode)
The power of the HS-SCCH is an offset in dB to the transmit power of the PCPICH. The power of the HS-SCCH is valid only when the power of the HS-SCCH is controlled by predefined values. The power is a fixed value.
Enumeration Type NO, YES
Source logical Cell ID Interval Type 0~65535
Peak cell rate of ATM channel Interval Type
IP Address Type -
Interval Type 1024~65535
Enumeration Type DISABLE, ENABLE
ML PPP Link No. Interval Type 0~15
Route Preference Interval Type 1~255
Start Date of the E1/T1 Routine Test Compound Type None
Start Date of the Daylight Saving Time Interval Type 1~31
Any Type 40.00~54.00
Whether to set the Mac-e schedule parameters or not
The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;
Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask.
Peer SCTP Port is one of the parameters between NodeB and RNC.
Protocol Field Compress. DISABLE means not being compressed; ENABLE means being compressed.
Simple Discharge End Voltage of the Battery Capacity Test
Interval Type 1~240
Password Type 0~16 characters
Interval Type 0~5
Sector Number Interval Type 0~5
Interval Type
It indicates type of the sector. Enumeration Type
Sector ID String Type None
Sector ID String Type None
Simple Discharge Time Limit of the Battery Capacity Test
Password. It is mandatory if AUTH is not NONAUTH.
It is sequentially numbered in the site. Up to six sectors can be configured to one site.
Receive Cell Rate. The RCR value must be equal to the DL bandwidth configured at the RNC. When the AAL2PATH is configured at the NodeB, the RCR will be used as the receive bandwidth, which is an important parameter in the algorithm for flow control. Whether the RCR is configured correctly or not will affect the result of the algorithm for flow Control.
The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;
E-HICH power control policy for service radio link set
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)
Whether to set the E-HICH power control parameters for non-service radio link set or not
This parameter specifies the power offset of the E-HICH non-serving RLS from the power of the Common Pilot Channel.
E-HICH Power Offset for Service Radio Links Set; an offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
E-RGCH power control policy for service radio link set
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)
Whether to set the E-RGCH power control parameters for non-service radio links or not
This parameter specifies the power offset of the E-RGCH non-serving RL from the power of the Common Pilot Channel.
E-RGCH Power Offset for Service Radio Links Set; an offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
Serial Number String Type None
Antenna Serial No. String Type None
IP Address of the FTP Server IP Address Type None
Source FACH Channel ID Interval Type 0~255
Shield Flag to Be Set Enumeration Type
Interval Type 1~65535
E-HICH Power for Single Radio Link Interval Type -350~150
IP address bearing traffic at the RNC. IP Address Type -
UNSHIELDED(Not Shielded), SHIELDED(Shielded)
RestartTimer. Timer for Configure-Request or Terminate-Request packets.
Start Date Mode of the Daylight Saving Time Enumeration Type
Scheduling Method of HSDPA Enumeration Type
Start Month of the Daylight Saving Time Enumeration Type
Slot No. of Power Amplifier1:Power Amplifier refers to the power amplify unit in RRU.
Slot No. of Power Amplifier2:Power Amplifier refers to the power amplify unit in RRU.
Sensor Output Lower Limit of the NEMU Standby Analog Value Input Parameters (Voltage Sensor)
Any Type 0~4294967295
Any Type 0~4294967295
Any Type 0~4294967295
Interval Type 1~525600
Resource Group ID Interval Type 0~3
Speed Rate of High Speed Local Cell Enumeration Type
Sensor Output Lower Limit of the NEMU Standby Analog Value Input Parameters (Current Sensor)
Sensor Output Upper Limit of the NEMU Standby Analog Value Input Parameters (Voltage Sensor)
Sensor Output Upper Limit of the NEMU Standby Analog Value Input Parameters(For Current Sensor)
Synchronization Period of the SNTP Client Parameters
250 (250km/h), 400 (400km/h), 500 (500km/h)
State of the Supported Firewall Enumeration Type No, Yes
Source Port No. Range Type 0~7
Source Fraatm Link No. Range Type 0~7
Source Port No. Range Type 0~7
Source Port Type Enumeration Type
Enumeration Type
Source Subboard Type Enumeration Type
Source Subboard Type Enumeration Type
Source Slot No. Range Type 0~7
Source Slot No. Range Type 0~7
Source Subrack No. Range Type 0
Route type option Enumeration Type
IMA(Bearing Port Type is IMA), UNI(Bearing Port Type is UNI), FRAATM(Bearing Port Type is FRAATM)
Expected Rx Switch, if it is empty, the Rx Expected Trace Byte Setting will not be changed.
DISABLE(Disable), ENABLE(Enable)
BASE_BOARD(base board)
E1_COVERBOARD(E1/T1 cover board)
NEXTHOP(IP address of the next hop), IF(Out port)
Rate unit Enumeration Type KBIT/S, CELL/S
Interval Type 8~100000
E-HICH Power Offset for Single Radio Link Interval Type 0~255
Subrack No. Interval Type 0~8, 20~254
Rx Bandwidth. This is an important parameter for the flow control algorithm. The value of RXBW must be equal to the DL bandwidth at the RNC. If not, the result of flow control algorithm will be affected.
Subrack No. Range Type 0
Subrack No. Range Type 0
Interval Type 20~254
Interval Type 20~254
Subrack No. of RRU Begin Interval Type 20~254
Subrack No. of RRU End Interval Type 20~254
Subrack No. of DL Process Unit 1 Interval Type 0
Subrack No. of UL Process Unit 1 Range Type 0
Subrack No. of DL Process Unit 2 Interval Type 0
Subrack No. of UL Process Unit 2 Range Type 0
Subrack No. of DL Process Unit 3 Interval Type 0
Subrack No. of UL Process Unit 3 Range Type 0
Subrack No. of DL Process Unit 4 Interval Type 0
Subrack No. of UL Process Unit 4 Range Type 0
Subrack Type Enumeration Type
Subrack No. of Power Amplifier1: Power Amplifier refers to the power amplify unit in RRU.
Subrack No. of Power Amplifier2: Power Amplifier refers to the power amplify unit in RRU.
FAN (Fan Subrack), EXT (Extension Subrack), RFU (RFU Subrack)
Expected Rx Procotol Version. According to the Second Revision of ITU-T 3/G.831, the trace message will be padded with T.50 "NUL" character to get a maximum available byte character string. For interworking with equipment developed prior to this version of protocol that may use the T.50 space as a padding character, new equipment should be able to generate T.50 "SPACE" padding characters as an option.
REVISION_2ND(Second Revision. Padding with T.50 "NUL"), EARLIER_VER(Prior to Second Revision. Padding with T.50 space)
The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;
Compound Type None
Start Time of the E1/T1 Routine Test Compound Type None
Sustain Cell Rate Interval Type
It is the number of the site. Interval Type 0~4294967295
Site Number Interval Type 0~4294967295
Site Name String Type None
Start Time of the Daylight Saving Time (At a Non-DST).
The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;
Scramble Mode Enumeration Type
SCTP Link No. Interval Type 0~19
Interval Type 1~6
Enumeration Type
IP Address Type -
Start Week of the Daylight Saving Time Enumeration Type
ENABLE(Scramble, it must be ENABLE, when E1/T1 adopts AMI mode), DISABLE(No scramble)
Subunit Number of the Antenna Line Device (ALD)
Switch of the Time Synchronization of the SNTP Client Parameters
ON (Need to be synchronized), OFF (Not need to be synchronized)
Second local IP address of SCTP association. This parameter is one of those between NodeB and RNC. This parameter must meet the following conditions: This parameter can be set to 0.0.0.0. If it is not set to 0.0.0.0, the IP address is of legal A, B, or C type, but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. If it is set to 0.0.0.0, this parameter is not used. The parameter cannot be equal to any other SCTP link IP address but must be an active interface address of this board.
Smooth Power Change Function Switch Enumeration Type
Enumeration Type
IP Address Type -
Temperature Compensation Coefficient Interval Type 0~500
Number of the Tail Cabinet in the RRU Ring Enumeration Type
Source Resource Group ID Interval Type 0~3
Timely Discharge Test Time Interval Type 30~240
Second peer IP address of SCTP association. This parameter is one of those between NodeB and RNC. This parameter must be set to meet the following conditions: This parameter can be set to 0.0.0.0. If it is not set to 0.0.0.0, the IP address is of legal A, B, or C type, but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. If it is set to 0.0.0.0, this parameter is not used. The parameter cannot be equal to any other SCTP link IP address.
Automatic Alarm Handling Switch After the VSWR Alarm
IPCLK Server IP Address, which should belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The CIP and SIP should be different.
MASTER(Master cabinet)
Antenna Tilt Interval Type -100~300
Installed Mechanical Tilt Range Type -100~127
Installed Mechanical Tilt Range Type -10~30
Enumeration Type
Source Port VCI Interval Type 32~511
Source Port VPI Interval Type 0~255
Temperature Alarm Lower Limit Interval Type -10.00~55.00
Source E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot. Otherwise, it is not crossed.
Time Offset of the Daylight Saving Time Interval Type -120~120
RRU Topology Position Enumeration Type
Interval Type
Enumeration Type
Enumeration Type
Minimum Preferable Value of the Temperature at the Delta Air Outlet of the NCMU Heat Control Delta Parameter
TRUNK (TRUNK), BRANCH (BRANCH)
Optical Port Number of the Tail Interface Board (For Ring Topology Only)
0~2(WBBPa), 0~5(WBBPb)
Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR(Unspecified Bit Rate), UBR_PLUS(Unspecified Bit Rate+)
Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR(Unspecified Bit Rate), UBR_PLUS(Unspecified Bit Rate+)
STM1 No. Range Type 0~1
Interval Type 2~3
Interval Type 0
Topology Type of the RRU Chain Enumeration Type
Temperature Alarm Upper Limit Interval Type -10.00~55.00
Interval Type 1~1023
Enumeration Type
Trace Byte Enumeration Type J0(J0), J1(J1), J2(J2)
Slot Number of the Tail Interface Board (For Ring Topology Only)
Number of the Tail Subrack (For Ring Topology Only)
CHAIN (Chain Topology Type), RING (Ring Topology Type)
Sub Frame Max Length, which indicates the maximum length of the FP before multiplexing. The FP can be multiplexed only when its frame length is smaller than this value.
Tx Switch, if it is empty, the Tx Trace Byte Setting will not be changed.
DISABLE(Disable), ENABLE(Enable)
Interval Type 1~20
Enumeration Type
Tx Unit No. Range Type 0~1
WRFU/RRU TX Unit Switch Enumeration Type
Enumeration Type
This parameter indicates the duration of Timer.
16th TimeSlot Support. This parameter is valid when the timeslot is in E1 mode.
ENABLE(Enable), DISABLE(Disable)
ON (Switch on), OFF (Switch off)
E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot. Otherwise, it is not crossed.
Tx Procotol Version. According to the Second Revision of ITU-T 3/G.831, the trace message will be padded with T.50 "NUL" character to get a maximum available byte character string. For interworking with equipment developed prior to this version of protocol that may use the T.50 space as a padding character, new equipment should be able to generate T.50 "SPACE" padding characters as an option.
REVISION_2ND(Second Revision. Padding with T.50 "NUL"), EARLIER_VER(Prior to Second Revision. Padding with T.50 space)
Any Type 0~64 characters
UNI Link No. Interval Type 0~7
Bearing VCI Interval Type 32~511
IMA Protocol Version Enumeration Type
VLAN Group No. Interval Type 0~3
VLAN ID Interval Type 1~4094
VLAN Mode Enumeration Type
Interval Type 0~7
Bearing VPI Interval Type 0~255
User Name. It is mandatory if AUTH is not NONAUTH.
V1.0(IMA protocol version 1.0), V1.1(IMA protocol version 1.1)
SINGLEVLAN (Single vlan), VLANGROUP (Vlan Group)
VLAN Priority, which indicates the priority level of VLAN
If the check mode is POW_IQ_MODE or IQ_MODE, the range is 9~28.If the check mode is POW_MODE, the range is 0xFF for invalid value.
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value.
When the signal linearity range is bigger than the threshold, the detect is started.
Carrier Index 2 range 0~3
Unit Index 2 range 0~1
Carrier Index 3 range 0~3
Unit Index 3 range 0~1
Carrier Index 4 range 0~3
Unit Index 4 range 0~1
Carrier Index 5 range 0~3
Unit Index 5 range 0~1
Carrier Index 6 range 0~3
Unit Index 6 range 0~1
Carrier Index 7 range 0~3
Unit Index 7 range 0~1
Carrier Index 8 range 0~3
Unit Index 8 range 0~1
Rate Unit Enumerate kbps, cell/s
Protocol Type Enumerate HW_DEFINED, PTP
Domain which slave side join in Range Type 0~127
Enumerate MASTER, SLAVE
Maintenance Domain name String Type -
Maintenance level Range Type 0~7
Maintenance Domain name String Type -
Maintenance Association name String Type -
Virtual LAN ID Range Type 1~4094
A flag indicating which RNC the NodeB belong to.
Maintenance End Point ID, only in VLAN Range Type 1~8191
Remote Maintenance End Point ID Range Type 1~8191
String Type -
Destination IP Address IP Address Type -
Bearing Port Type Enumeration Type ETH, ETHTRK
Port No. Range Type 0~3
BFD Session No. Range Type 0~3
Source IP Address IP Address Type None
Destination IP Address IP Address Type None
Hop Type Enumeration Type
User configure local TX interval Range Type 10~1000
User configure local RX interval Range Type 10~1000
User configure local detect multiplier Range Type 3~10
TrunkNo. Range Type 0~1
Lacp Switch Enumeration Type DISABLE, ENABLE
Remote Maintenance End Point MAC address
SINGLE_HOP, MULTI_HOP
ArpProxy Enumeration Type DISABLE, ENABLE
Range Type 0~100
Range Type 0~100
Ethernet Port No. in TRUNK Range Type 0~3
Maximum Efach Retransmission Times Range Type 0~10
Range Type 0~10
Enumeration Type
EFACH HS-SCCH Power Control Method Enumeration Type
HS-SCCH FER Target in CELL DCH State Range Type 1~999
Enumeration Type
Frame Error Rate AppearThreshold of FE MAC Layer
Frame Error Rate DisappearThreshold of FE MAC Layer
Max HARQ Retransmission Times of Non-Conversational serive in Cell DCH state
HS-SCCH Power Control Method in CELL DCH state
CQI (CQI-based power control), FIXED (Fixed Power)
CQI (CQI-based power control), FIXED (Fixed Power)
CQI Adjustment Algorithm Switch of Conversational Service
NO_CQI_ADJ(Not CQI Adjust Algorithm), CQI_ADJ_BY_RBLER(CQI Adjusted by RBLER),
Enumeration Type
Range Type 1~50
HSUPA CE SCHEDULING SWITCH Enumeration Type OPEN, CLOSE
Enumeration Type OPEN, CLOSE
It refers to Source LocalCell ID Range Type 0~26843545
It refers to Destination LocalCell ID Range Type 0~26843545
Max Sharing Power Ratio Range Type 1~80
Sharing Power Margin Range Type 1~80
R99 Flow Control Function Switch Enumeration Type OPEN, CLOSE
Dl BB Resource Allocation Mode Enumeration Type
BB Resource Pool Type Enumeration Type GEN_POOL
Itel Shutdown Switch Enumerate
Switch for disturb detect range 0~1
Check mode range 0~2
CQI Adjustment Algorithm Switch of non-Conversational Service
NO_CQI_ADJ(Not CQI Adjust Algorithm), CQI_ADJ_BY_IBLER(CQI Adjusted by IBLER)
Residual BLER Target is valid only when the CQI Adjust Algorithm is set to CQI_ADJ_BY_RBLER
HSUPA OVERLOAD SCHEDULING SWITCH
INHBOARD, UNLIMITED, INEBOARD
ENABLE(Enable), DISABLE(Disable)
IQ Data Length range
Power Start Period range
Power Collecting Time range 5~50
Period of Detecting range 100~5000
range 0~4294967295
Unit Number Enumerate 1~8, 0xFF for all
Carrier Index 1 range 0~3
Unit Index 1 range 0~1
Carrier Index 2 range 0~3
Unit Index 2 range 0~1
Carrier Index 3 range 0~3
Unit Index 3 range 0~1
Carrier Index 4 range 0~3
Unit Index 4 range 0~1
If the check mode is POW_IQ_MODE or IQ_MODE, the range is 9~28;If the check mode is POW_MODE, the range is 0xFF for invalid value.
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value.
When the signal linearity range is bigger than the threshold, the detect is started.
Carrier Index 5 range 0~3
Unit Index 5 range 0~1
Carrier Index 6 range 0~3
Unit Index 6 range 0~1
Carrier Index 7 range 0~3
Unit Index 7 range 0~1
Carrier Index 8 range 0~3
Unit Index 8 range 0~1
Bearing Port Type Enumeration Type
When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)
Port Type Enumeration Type
Bearing Port Type Enumeration Type
when SBT is E1_COVERBOARD: PPP(PPP), MPGRP(MLPPPP GROUP) are available.when SBT is ETH_COVERBOARD: ETH(ETHPORT), ETHTRK(Ethernet Trunk Group) , LOOPINT(LOOPBACK INTERFACE) are available.when SBT is BACK_BOARD: PPP(PPP) is available.
When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group)When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose PPP(PPP)
Port Type Enumeration Type
Port Type Enumeration Type
E1T1~ETH: when SBT is BASE_BOARD;STM1:when SBT is UNCHANNELLED_COVERBOARD;E1T1: when SBT is E1_COVERBOARD
it is valid when BEAR is ATM modeValue range: IMA (Bearing Port Type is IMA), UNI (Bearing Port Type is UNI), STM1 (Bearing Port Type is STM1), FRAATM (Bearing Port Type is FRAATM)
Bearing Port Type Enumeration Type
IMA Group Subboard Type Enumeration Type
Interval Type 0~100
Interval Type 0~100
ATM, When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)When the bear type is IPV4, When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group) When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose If SN = 0~5, E1_COVERBOARD: E1 Coverboard;If SN = 6~7, BASE_BOARD: Base Board;
IP Packets Discard Alarm Appear Threshold
Unit: one in a thousand
IP Packets Discard Alarm Disappear Threshold
ML PPP Group Subboard Type Enumeration Type
E1T1 Subrack No. Range Type 0
E1T1 Slot No. Range Type 0~7
E1T1 Subboard Type Enumeration Type
E1T1 Port No. Range Type
Back Board Hw No. Range Type 0~7
Frame CRC Enumeration Type
Remote Maintenance End Point ID Range Type 1~8191
Subboard Type Enumeration Type
3ah Switch Enumeration Type DISABLE, ENABLE
PTP Priority Range Type
Clear Statistic Range Type
If SN = 0~5, E1_COVERBOARD:E1 CoverboardIf SN = 6~7, BASE_BOARD: Base Board
If SN = 0~5, E1_COVERBOARD:E1 Coverboard
0~3: When SBT is BASE_BOARD;0~7: When SBT is E1_COVERBOARD;0~3: When SBT is BACK_BOARD.
NOCRC~1 CRC_16~2 CRC_32~4
UNCHANNELLED_COVERBOARD~2
Refers to PTP priority.Value range:0~7:when PRIRULE is IPPRECEDENCE, 0 ~63:when PRIRULE is DSCP.
Note: 0 indicates that the statistics is not cleared and 1 indicates that the statistics is cleared.
Range Type 1~256
Range Type 95~1500
Range Type 1~65535
Range Type 1~60
Bearing Port Type Enumeration Type
The type of power Enumeration Type
This parameter indicates the number of the sent packets.
This parameter indicates the size of the sent packet.
This parameter indicates the preset timeout (unit: s).
This parameter indicates the preset interval (unit: s).
ETHTRK(ETHTRK), MPGRP(MLPPP GROUP), ETH(ETH)
APM100, APM200, APM30
Actual Value Range Unit Default Value Recommended Value
Ethernet electrical port: 10M, 100M, AUTO; Ethernet optical port: 100M
USERDATA, SIG, OM, OTHER
0~268435455 None None None
1~4094 None 1 None
0~7 None 0 None
46~1500 None None
0~255 min None None
ENABLE, DISABLE None DISABLE None
35.0~55.6, precision:0.1 V 44 None
DISABLE, ENABLE None ENABLE ENABLE
-(SET ETHPORT)1500(ADD ETHTRK)
-99~70 Celsius 0 None
55~70 None 65 65
-40~10 Celsius -20 None
ON, OFF None OFF None
None None None
None None None
0~31 None
-35~15 dB, step: 0.1 dB dB None -60
NONAUTH, PAP, CHAP None None None
DISABLE, ENABLE None ENABLE ENABLE
ATM, IPV4 None ATM None
0~50 dB, step: 0.1 dB dB None None
A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.
The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;
kbps or cell/s
HOUR , MIN , SEC None None None
Format:HH&MM&SS None None None
None None
0~4294967295 None None None
0~4294967295 None None None
A string of up to 31 bytes None None None
The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;
kbps or cell/s
ENABLE, DISABLE None ENABLE ENABLE
0~19 None 0 None
1~6 None None None
ON, OFF None None None
0.0.0.0~255.255.255.255 None 0.0.0.0 None
None None NoneSUN, MON, TUE, WED, THU, FRI, SAT
0.0.0.0~255.255.255.255 None 0.0.0.0 None
ON, OFF None None None
OPEN, CLOSE None None None
None None None
0.0.0.0~255.255.255.255 None None None
0~500 Celsius 80 80
MASTER None MASTER None
0~3 None 0 None
30~240 d 120 None
FIRST, SECOND, THIRD, FOURTH, LAST
-100~300*0.1, Step:0.1 degree None None
-10~12.7, Step:0.1 degree None None
-100~300, Step:10 degree None None
None None None
32~511 None None None
0~255 None None None
-10.00~55.00 Celsius None None
A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.
-99~70 Celsius 45 None
Format:HH&MM&SS None None None
-120~120 None None None
TRUNK, BRANCH None None None
0~5 None None None
None RTVBR None
None RTVBR None
RTVBR, NRTVBR, UBR, UBR+
CBR, RTVBR, NRTVBR, UBR, UBR+
0~1 None 0 None
2~3 None None None
0 None 0 0
CHAIN, RING None None None
-10.00~55.00 Celsius None None
1~1023 byte 127 127
DISABLE, ENABLE None ENABLE None
J0, J1, J2 None J0 None
1~20 ms 1 1
ENABLE, DISABLE None DISABLE None
0~1 None 0 0
ON, OFF None None None
None None None
A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.
If the check mode is POW_IQ_MODE or IQ_MODE, the range is 2^9~2^28.If the check mode is POW_MODE, 255 for invalid value.
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18, If the check mode is IQ_MODE, the range is 0xFF for invalid value.
0~3 None 1 None
0~1 None 0 None
0~3 None 2 None
0~1 None 0 None
0~3 None 3 None
0~1 None 0 None
0~3 None 0 None
0~1 None 1 None
0~3 None 1 None
0~1 None 1 None
0~3 None 2 None
0~1 None 1 None
0~3 None 3 None
0~1 None 1 None
kbps, cell/s None kbps kbps
HW_DEFINED, PTP None HW_DEFINED HW_DEFINED
0~127 None 0 None
MASTER, SLAVE None MASTER MASTER
1~43byte None None None
0~7 None 0 None
1~43byte None None None
1~43byte None None None
1~4094 None None None
1~8191 None None None
1~8191 None None None
1~13 byte None None None
0.0.0.0~255.255.255.255 None None None
ETH, ETHTRK None ETH None
0~3 None None None
0~3 None None None
0.0.0.0~255.255.255.255 None None None
0.0.0.0~255.255.255.255 None None None
None None None
10~1000 ms 10 10
10~1000 ms 10 10
3~10 None 3 None
0~1 None 0 None
DISABLE, ENABLE None DISABLE None
SINGLE_HOP, MULTI_HOP
DISABLE, ENABLE None DISABLE None
0~100 100 None
0~100 0 None
0~3 None None None
0~10 Times None 2
0~10 Times None 4
CQI, FIXED None None CQI
CQI, FIXED None None CQI
1~999 ‰ None 10
None None NO_CQI_ADJ
one in a thousand
one in a thousand
NO_CQI_ADJ, CQI_ADJ_BY_RBLER
None None NO_CQI_ADJ
1~50 ‰ None 7
0, 1 None None OPEN
0, 1 None None OPEN
0~26843545 None None None
0~26843545 None None None
1~80 % 50 50
1~80 % 10 10
OPEN, CLOSE None None None
None INHBOARD INHBOARD
GEN_POOL None GEN_POOL INHBOARD
None ENABLE None
0~1 None 0 None
0~2 None 0 None
NO_CQI_ADJ, CQI_ADJ_BY_IBLER
INHBOARD, UNLIMITED, INEBOARD
ENABLE(Enable), DISABLE(Disable)
byte None None
None None None
0.5s~5s 0.1sec 5s None
0.1s~5s ms None None
0~4294967295 dBFS None None
1~8, 0xFF for all None 0xFF None
0~3 None 0 None
0~1 None 0 None
0~3 None 1 None
0~1 None 0 None
0~3 None 2 None
0~1 None 0 None
0~3 None 3 None
0~1 None 0 None
If the check mode is POW_IQ_MODE or IQ_MODE, the range is 2^9~2^28;If the check mode is POW_MODE, 255 for invalid value.
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value.
0~3 None 0 None
0~1 None 1 None
0~3 None 1 None
0~1 None 1 None
0~3 None 2 None
0~1 None 1 None
0~3 None 3 None
0~1 None 1 None
None IMA IMA
When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)
None None None
None None None
when SBT is E1_COVERBOARD: PPP(PPP), MPGRP(MLPPPP GROUP) are available.when SBT is ETH_COVERBOARD: ETH(ETHPORT), ETHTRK(Ethernet Trunk Group) , LOOPINT(LOOPBACK INTERFACE) are available.when SBT is BACK_BOARD: PPP(PPP) is available.
When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group)When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose PPP(PPP)
None None None
None None None
E1T1~ETH: when SBT is BASE_BOARD;STM1:when SBT is UNCHANNELLED_COVERBOARD;E1T1: when SBT is E1_COVERBOARD
it is valid when BEAR is ATM modeValue range: IMA (Bearing Port Type is IMA), UNI (Bearing Port Type is UNI), STM1 (Bearing Port Type is STM1), FRAATM (Bearing Port Type is FRAATM)
None None None
None E1_COVERBOARD E1_COVERBOARD
0~100 None 10 10
0~100 None 8 8
When the bear type is ATM, When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)When the bear type is IPV4, When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group) When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose If SN = 0~5, E1_COVERBOARD: E1 Coverboard;If SN = 6~7, BASE_BOARD: Base Board;
None E1_COVERBOARD E1_COVERBOARD
0 None None None
0~7 None None None
None None None
None 0 0
0~7 None 0 0
None CRC_16 CRC_16
1~8191 None None None
None None None
DISABLE, ENABLE None None None
None None None
None None None
If SN = 0~5, E1_COVERBOARD:E1 CoverboardIf SN = 6~7, BASE_BOARD: Base Board
If SN = 0~5, E1_COVERBOARD:E1 Coverboard
0~3: When SBT is BASE_BOARD;0~7: When SBT is E1_COVERBOARD;0~3: When SBT is BACK_BOARD.
NOCRC~1 CRC_16~2 CRC_32~4
UNCHANNELLED_COVERBOARD~2
Refers to PTP priority.Value range:0~7:when PRIRULE is IPPRECEDENCE, 0 ~63:when PRIRULE is DSCP.
Note: 0 indicates that the statistics is not cleared and 1 indicates that the statistics is cleared.
1~256 None 10 None
95~1500 bytes 95 None
1~65535 s 2 None
1~60 s 1 None
None None None
None None None
ETHTRK(ETHTRK), MPGRP, ETH
APM100, APM200, APM30
Impact Parameter Relationship Access
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
NodeB None Read & Write
NodeB Read & WriteThis parameter is valid when the operating mode is CSAT
NPMU Read & Write
NPMU Read & Write
OMCH None Read & Write
NodeB None Read & Write
NodeB None Read & Write
Cell Read & Write
This parameter value must be greater than [PARA]ACVLL[/PARA] in [MML]SET ACDCVLIMIT[/MML]
[PARA]ACVLL[/PARA] is less than [PARA]ACVHL[/PARA] in [MML]SET ACDCVLIMIT[/MML]
It is valid when [PARA]SCHEDULEPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].
NodeB None Read & Write
NodeB Read & Write
NodeB Read & Write
OMCH Read & Write
Cell None Read Only
This parameter is valid only when the [PARA]OBJN[/PARA] is set "BRD", E1/T1(E1/T1), E1/T1OnChannelsSubbrd.
When MODE = CUSTOM, this parameter is valid. If the parameter is not specified, the existing binding relation is not changed. If the original setting of the system is 0, the alarm ID is invalid.
This parameter is valid when the [PARA]BEAR[/PARA] parameter in [MML]ADD OMCH[/MML] is set to IPV4.
Cell Read Only
Cell Read & Write
Cell Read Only
Cell None Read Only
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;
For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;
Cell Read Only
Cell Read & Write
Cell Read Only
Cell None Read Only
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;
For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;
Cell Read Only
Cell Read Only
Cell None Read Only
Cell Read Only
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;
For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;
Cell Read Only
Cell Read Only
NodeB None Read & Write
For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;
This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR or LOCAL_SECTOR. When [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is set to DEM_2_CHAN, there will be 1 or 2 antena; When [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is set to DEM_4_CHAN or DEM_ECON_4_CHAN , there will be 1/2/4 antena.
NodeB None Read & Write
NEMU None Read & Write
Battery Read & Write
NodeB None Read & Write
SAAL None Read & Write
This parameter TDSTM is valid only when [PARA]TDSTM[/PARA] in [MML]SET BATATPA[/MML] is set to "PERIOD" or "PERIODPOWERCUT"
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NEMU None Read & Write
NodeB Read & Write
No Read & Write
No Read & Write
No Read & Write
No Read & Write
No Read & Write
When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is BOOL, this parameter is valid.
This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.
This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.
This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.
This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.
This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.
No Read & Write
No Read & Write
No Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V1.1.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V2.0 or 3GPP
The value range is 30~600 when [PARA]PTYPE[/PARA] is APM100.The value range is 30~600 when [PARA]PTYPE[/PARA] is APM200.The value range is 5~600 when [PARA]PTYPE[/PARA] is APM30.
This parameter must be greater than [PARA]FCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] and less than [PARA]DCVHL[/PARA] in [MML]SET ACDCVLIMIT[/MML]-1, and between 43.2 and 57.6.
No Read & Write
No Read & Write
No Read & Write
No Read & Write
No Read & Write
No Read & Write
No
NodeB None Read & Write
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
OMCH Read & Write
OMCH Read & Write
NodeB Read & Write
No Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
IUBCP None Read & Write
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES.The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES.The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].
This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE.
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to RING.
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB Read & Write
Ethport Read & Write
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"
If the value is "ENABLE", the value of [PARA]BSDV[/PARA] in [MML]SET SDPA[/MML] is valid.
The parameter is valid only when the [PARA]BSDF[/PARA] in [MML]SET SDPA[/MML] is set to Enable.
[PARA]FERAT[/PARA] should be greater than or equal to [PARA]FERDT[/PARA].
NodeB None Read Only
NodeB Read Only
NodeB Read & Write
NodeB None Read Only
The parameter is valid only when the [PARA]SWT[/PARA] in [MML]ACT SOFTWARE[/MML] is set to HOMOBRDSW or HOMOBRDROM.
BTEM could be configed when [PARA]BFLG[/PARA] in [MML]SET HTPROTECT[/MML] is ENABLE
NodeB None Read Only
Ethport Read & Write
NodeB None Read & Write
OMCH None Read & Write
NodeB None Read & Write
NodeB Read & Write
[PARA]FERDT[/PARA] should be smaller than or equal to [PARA]FERAT[/PARA].
[PARA]CertChain[/PARA] is valid while [PARA]CCAEnableSta[/PARA]=Enable in [MML]SET CERTFILE[/MML].
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
SAAL Read & Write
This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]
This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]
This parameter is valid only when [PARA]TYPE[/PARA] in [MML]STR RTWPRTTST[/MML] is set to "CHANGE" or "CHANGE_THRESHOLD"
This parameter is valid only when the [PARA]FPMUXSWITCH[/PARA] parameter in [MML]SET FPMUX[/MML] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.
The value of this paramter must be greater than or equal to the value of [PARA]KATM[/PARA].
OMCH Read & Write
OMCH Read & Write
NodeB None Read & Write
NodeB Read & Write
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 , [PARA]BRT[/PARA] is set to YES and [PARA]RT[/PARA] is set to IF.
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 , [PARA]BRT[/PARA] is set to YES and [PARA]RT[/PARA] is set to IF.
This parameter is valid only when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to "MANUAL"
NodeB None Read & Write
NodeB Read Only
Cell Read Only
Cell Read Only
type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 0~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit)0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 8 0~1 NCMU
For DBS:This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] is REMOTE_SECTOR and LOCAL_SECTOR.
For DBS:This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] is REMOTE_SECTOR and LOCAL_SECTOR.
Cell Read Only
Cell Read Only
NodeB None Read Only
NodeB None Read Only
NodeB None Read Only
NodeB None Read Only
NodeB None Read Only
NodeB None
NodeB None Read Only
NodeB None
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
ADD SEC:This parameter is valid only When the [PARA]SECT[/PARA] is DIST_SECTOR.ADD LOCELL:This parameter is valid noly When the [PARA]SECT[/PARA] is DIST_SECTOR, at the same time[PARA]RRUMODE[/PARA] is UNSYNC.
ADD SEC:This parameter is valid only When the [PARA]SECT[/PARA] is DIST_SECTOR.ADD LOCELL:This parameter is valid noly When the [PARA]SECT[/PARA] is DIST_SECTOR, at the same time[PARA]RRUMODE[/PARA] is UNSYNC.
NodeB Read & Write
Cell Read Only
NodeB Read & Write
It is valid when [PARA]AUTOSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].
It is valid only When [PARA]DIVM[/PARA] in [MML]ADD SEC[/MML] is HALFFREQ.
[SET LOCALIP]The IP address for local maintenance, IP address of the Ethernet port, and IP address for remote maintenance must be unique.The IP addresses of the FE port, local maintenance channel, and remote maintenance channel cannot be on the same network segment. In addition, the network segments of the three types of IP address must be exclusive of each other.Check whether two IP addresses are on the same network segment by using the following formula: (IpValueA & IpMaskA==IpValueB & IpMaskB)&&(IpMaskA==IpMaskB)Check whether two network segments are exclusive of each other by using the following formulas:1. IpMask=IpMaskA & IpMaskB2. IpValueA & IpMask==IpValueB & IpMaskIP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
OMCH Read & Write
Cell None Read & Write
NodeB Read & Write
NodeB None Read & Write
None Read & Write
NodeB None Read & Write
NodeB Read & Write
No involved None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
[PARA]CRL[/PARA] is valid while [PARA]CRLEnableSta[/PARA]=Enable in [MML]SET CERTFILE[/MML].
Auxiliary power systemCMU
This parameter is valid only when [PARA]CSLSDF[/PARA] in [MML]SET SDPA[/MML] is set to "ENABLE"
NodeB Read & Write
NodeB Read & Write
NCMU None Read & Write
Cell None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].
It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].
NodeB None Read & Write
NPMU Read & Write
NPMU Read & Write
Battery Read & Write
Cell Read & Write
This parameter must be greater than [PARA]BCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] + 1
This parameter value must be greater than [PARA]LSDV[/PARA] in [MML]SET SDPA[/MML], less than [PARA]FCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML]-2This parameter value must be greater than [PARA]BSDV[/PARA] in [MML]SET SDPA[/MML] when [PARA]LSDF[/PARA] in [MML]SET SDPA[/MML] is set to "Disable"This parameter value must be greater than 35 when [PARA]LSDF[/PARA] and [PARA]BSDF[/PARA] in [MML]SET SDPA[/MML] are both set to "Disable"
The [PARA]DDSTM[/PARA] value must be smaller than [PARA]TDSTM[/PARA] value in [MML]SET BATATPA[/MML].
This parameter is valid noly When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR.
OMCH Read & Write
SAAL Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
Cell None Read & Write
The resource group is added when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.
This parameter must be greater than or equal to the value of [PARA]POLL[/PARA].This parameter must be smaller than or equal to the value of [PARA]IDLE[/PARA].This parameter must be smaller than the value of [PARA]NRTM[/PARA].
[PARA]DEVTP[/PARA] is valid while [PARA]OPMODE[/PARA]=SECTOR or OPMODE=CSAT
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
Cell Read & Write
Cell Read & Write
Cell Read & Write
Cell Read & Write
This parameter is valid only when the value of [PARA]LM[/PARA] is set to ONLYIPADDR or IPADDRANDUDPPORT.
This parameter is valid only when the sector type of local cell is not distributed sector.
This parameter is invalid when the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR; HALFFREQ is valid when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR.
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.
Cell Read & Write
Cell Read & Write
Cell None Read & Write
NodeB None Read Only
Cell None Read & Write
SCTP None Read & Write
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
Battery None Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]
OMCH Read & Write
SAAL None Read & Write
SAAL None Read & Write
SAAL None Read & Write
Battery None Read & Write
NodeB Read Only
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
The value range is 0~1 when [PARA]DSTPT[/PARA] is IMA and [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]DSTPT[/PARA] is IMA and [PARA]DSTSBT[/PARA] is E1_COVERBOARD;The value range is 0~3 when [PARA]DSTPT[/PARA] is UNI and [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]DSTPT[/PARA] is UNI and [PARA]DSTSBT[/PARA] is E1_COVERBOARD;
NodeB Read Only
NodeB Read Only
NodeB None Read Only
OMCH Read & Write
Read Only
Read Only
None Read Only
The value range is 0~3 when [PARA]DSTPT[/PARA] is FRAATM and [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]DSTPT[/PARA] is FRAATM and [PARA]DSTSBT[/PARA] is E1_COVERBOARD;
The value range is 0~3 when [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]DSTSBT[/PARA] is E1_COVERBOARD;
This parameter is valid only when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to ATM and [PARA]ST[/PARA] is set to UBR+ .
NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)
When the value range of [PARA]DSTSN[/PARA] is 6~7, [PARA]DSTSBT[/PARA] is BASE_BOARD.
NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)
BASE_BOARD: when the board in destination slot is WMPT;E1_COVERBOARD:When the board in destination slot is UTRPValue range: BASE_BOARD, E1_COVERBOARD
NodeB(ADD TREELNKPVC)NodeB(ADD BACKE1T1)
NodeB Read Only
NodeB None Read Only
NodeB None Read & Write
OMCH Read & Write
SAAL Read & Write
NodeB Read & Write
Cell None Read & Write
The value range is 0~7 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 0~7;The value range is 0~5 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 8~15;
This parameter is valid only when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4, [PARA]BRT[/PARA] is set to YES, [PARA]SN[/PARA] is set to 6-7 and [PARA]RT[/PARA] is set to NEXTHOP .
This parameter must be greater than the value of [PARA]KATM[/PARA].
The value range is 0~7 when [PARA]PRIRULE[/PARA] is set to IPPRECEDENCE. The value range is 0~63 when [PARA]PRIRULE[/PARA] is set to DSCP.
Cell Read & Write
Cell None Read & Write
Cell Read & Write
Cell Read & Write
OMCH Read & Write
It is valid when [PARA]EAGCHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].
It is valid when [PARA]EAGCHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].
It is valid when [PARA]EAGCHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC, CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML].
When the [PARA]BEAR[/PARA] parameter in the MML command is set to ATM , and [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].
NodeB Read & Write
NodeB Read & Write
Battery None Read & Write
NodeB None Read Only
NodeB Read & Write
NodeB Read & Write
End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]" must be later than the current date and time. Start Date and Start Time"[PARA]SD[/PARA] and [PARA]ST[/PARA]in [MML]STR E1T1RTTST[/MML]" plus test time must be earlier than the End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]".
[PARA]EDAY[/PARA] is valid while [PARA]DST[/PARA]=YES and EM is DATEWEEK or DATE in [MML]SET TZ[/MML].
[PARA]EM[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].
[PARA]EMONTH[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].
No involved None Read & Write
Battery None Read & Write
OMCH Read & Write
OMCH Read & Write
NodeB Read & Write
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
[PARA]ET[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].
NodeB Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB
NodeB Read & Write
NodeB Read & Write
End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]" must be later than the current date and time. Start Date and Start Time"[PARA]SD[/PARA] and [PARA]ST[/PARA]in [MML]STR E1T1RTTST[/MML]" plus test time must be earlier than the End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]".
[PARA]EWEEK[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA] is DATEWEEK or WEEK in [MML]SET TZ[/MML].
[PARA]EWSEQ[/PARA] is valide while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA]=WEEK.
This parameter must be less than [PARA]BCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] and greater than [PARA]DCVLL[/PARA] in [MML]SET ACDCVLIMIT[/MML]+2, and between 43.2 and 57.6.
This parameter is valid only when the value of [PARA]LM[/PARA] is set to IPADDRANDUDPPORT.
[PARA]PLRAT[/PARA] should be greater than or equal to [PARA]PLRDT[/PARA].
NodeB Read & Write
SAAL Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
OMCH Read & Write
NodeB None Read & Write
OMCH Read & Write
[SET PLRTHRESHOLD]This is the threshold for clearing the packet loss alarm. The value of this command should not exceed the alarm generation threshold.[PARA]PLRDT[/PARA] should be smaller than or equal to [PARA]PLRAT[/PARA].
The value of this parameter must be smaller than or equal to the value of [PARA]KATM[/PARA].
This parameter is valid when[PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to IPV4 and [PARA]BRT[/PARA] in [MML]ADD OMCH[/MML] is set to YES.
The SN of the resource group is required when [PARA]JNRSCGRP[/PARA] in [MML]ADD OMCH[/MML] is set to ENABLE and [PARA]BEAR[/PARA] is set to ATM.
OMCH Read & Write
NodeB None Read & Write
OMCH Read & Write
SAAL Read & Write
NodeB Read & Write
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES .
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to ATM and [PARA]ST[/PARA] is set to RTVBR or NRTVBR.
This parameter is valid when in [MML]ADD SAALLNK[/MML] [PARA]ST[/PARA] is set to RTVBR or NRTVBR.
The value range is 0~7 when [PARA]PRIRULE[/PARA] is IPPRECEDENCE;The value range is 0~63 when [PARA]PRIRULE[/PARA] is DSCP;
OMCH Read & Write
NodeB None Read & Write
No Read & Write
No Read & Write
No Read & Write
No Read & Write
GPS None Read & Write
NodeB None Read & Write
Cell None Read & Write
This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
Cell Read & Write
No
Cell Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NCMU None Read & Write
For DBS:This parameter is valid only When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR or LOCAL_SECTOR
[PARA]HLL[/PARA] is less than [PARA]HUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]
The inner handover radius of the local cell must not be greater than [PARA]RADIUS[/PARA] in[MML]ADD LOCELL[/MML].
NCMU None Read & Write
NCMU None Read & Write
NCMU None Read & Write
No Read & Write
NodeB None Read & Write
SAAL None Read & Write
NodeB Read & Write
[PARA]HLL[/PARA] is less than [PARA]HUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]
This parameter is valid when [PARA]FPMUXSWITCH[/PARA] in [MML]SET FPMUX[/MML] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.
NodeB None Read & Write
No involved None Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
This parameter is valid when [PARA]FPMUXSWITCH[/PARA] in [MML]SET FPMUX[/MML] is set to ENABLE.
STM1 None Read & Write
OMCH Read & Write
NEMU None Read & Write
OMCH Read & Write
NodeB Read & Write
No Read & Write
No Read & Write
NodeB Read & Write
This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.
This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.
This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE.
This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. The value depends on the physical interface rate and must be lower than the physical interface rate. When [PARA]PT[/PARA] is set to MPGRP, the value range is 32 to 155000 kbit/s; when [PARA]PT[/PARA] is set to ETH, the value range is 32 to 155000 kbit/s.
NodeB Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB Read & Write
None Read & Write
NodeB None Read & Write
This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. The value depends on the physical interface rate and must be lower than the physical interface rate. When [PARA]PT[/PARA] is set to MPGRP, the value range is 32 to 155000 kbit/s; when [PARA]PT[/PARA] is set to ETH, the value range is 32 to 155000 kbit/s.
If the Ethernet port is an electrical port and [PARA]SPEED[/PARA] in [MML]SET ETHPORT[/MML] is not set to AUTO, this parameter is valid. If the Ethernet port is an optical port, this parameter is set to forced full-duplex.
This parameter is valid only when [PARA]SW[/PARA] in [MML]SET SNTPCLTPARA[/MML] is set to "ON".
This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]
NodeBSET E1T1WORKMODE)
NodeB Read & Write
NodeB None Read & Write
This parameter is valid when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL and [PARA]CLKSRC[/PARA] in [MML]SET CLKMODE[/MML] is set to "IP"
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB Read & Write
The value range is 15~30 when [PARA]SWTICH[/PARA] in [MML]SET VSWRALMPARAM[/MML] is set to ATM.
LL is less than [PARA]UL[/PARA] in [MML]SET NEMUINVLIMIT[/MML]
When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is VALUE, this parameter is valid.
NodeB None Read & Write
NodeB Read & Write
NodeB Read & Write
Read & Write
[PARA]LNCODE[/PARA] can be HDB3 or AMI when [PARA]FRAME[/PARA] is E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME.
[PARA]LNCODE[/PARA] can be B8ZS or AMI when [PARA]FRAME[/PARA] is T1_SUPER_FRAME or T1_EXTENDED_SUPER_FRAME.
It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET IPREMOTELOOP[/MML].It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET E1T1LOP[/MML].It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET STM1LOP[/MML].
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB None Read & Write
This parameter is valid only when the value of [PARA]LM[/PARA] is set to ONLYIPADDR or IPADDRANDUDPPORT.
If [PARA]PN[/PARA] = 0, the value can be forced 10Mbps, forced 100Mbps, or auto-negotiated.If [PARA]PN[/PARA] = 1, the value can be forced 100Mbps.
This parameter is valid when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL , [PARA]CLKSRC[/PARA] in [MML]SET CLKMODE[/MML] is set to "IP" and [PARA]IPMODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL
This parameter is valid when [PARA]TRAFFIC[/PARA] in [MML]SET VLANCLASS[/MML] is set to USERDATA.
Cell None Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
Cell None Read & Write
NodeB Read & Write
NodeB Read & Write
None Read & Write
This parameter is valid when [PARA]INSTAG[/PARA] in [MML]SET VLANCLASS[/MML] is set to ENABLE.
This parameter is valid when [PARA]INSTAG[/PARA] in [MML]SET VLANCLASS[/MML] is set to ENABLE.
If it is "ENABLE", the [PARA]LSDV[/PARA] in [MML]SET SDPA[/MML] value is valid.
The parameter is valid only when the [PARA]LSDF[/PARA] in [MML]SET SDPA[/MML] is set to Enable.
MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)
NCMU None Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
LTEM could be configed when [PARA]LFLG[/PARA] in [MML]SET HTPROTECT[/MML] is ENABLE
[PARA]OTH[/PARA] is more than [PARA]LTH[/PARA] in [MML]SET THAT[/MML]
NodeB Read & Write
NodeB None Read & Write
Read & Write
Cell Read & Write
None Read & Write
SCTP None Read & Write
IUBCP None Read & Write
Cell Read & Write
This parameter is valid only when the [PARA]NT[/PARA] parameter in [MML]ADD AAL2NODE[/MML] is set to LOCAL.
AAL2 Path(ADD AAL2PATH)NodeB(ADD AAL2ADJNODE)
This parameter is valid only when the [PARA]NT[/PARA] parameter in [MML]ADD AAL2PATH[/MML] is set to ADJNODE.
It is valid when [PARA]EAGCHPCMOD[/PARA] is CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML].
MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)
It is valid when [PARA]PWRMODE[/PARA] is ABSOLUTE in [MML]MOD RRUOFLOCELL[/MML].
NodeB None Read & Write
NodeB None Read & Write
None Read & Write
NodeB None Read & Write
NodeB None Read & Write
Cell Read & Write
IUBCP Read & Write
NodeB Read & Write
NEMU Read & Write
IUBCP None Read & Write
NodeB None Read & Write
NodeB None Read & Write
Tree Link PVC(ADD TREELNKPVC)AAL2 Path(ADD AAL2PATH)
It is valid when [PARA]EAGCHPCMOD[/PARA] is CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML].
This parameter is valid only when in [MML]ADD IUBCP[/MML] [PARA]CPPT[/PARA] is set to CCP.
It is valid when [PARA]AUTOSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].
MLL is less than [PARA]MUL[/PARA] in [MML]SET NEMUANLGIN[/MML]
NodeB None Read & Write
NodeB None Read & Write
None Read & Write
IMA Group None Read & Write
None Read & Write
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.
Tree Link PVC(ADD TREELNKPVC)Timeslot Cross(ADD TSCROSS)
NodeB None Read & Write
IP Path None Read & Write
NodeB Read & Write
NEMU Read & Write
NodeB Read & Write
Cell Read & Write
Cell None Read & Write
NodeB None Read & Write
The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].
This parameter value must be greater than [PARA]MLL[/PARA] in [MML]SET NEMUANLGIN[/MML]
The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].
For DBS:This parameter is valid only When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR or LOCAL_SECTOR
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
Tree Link PVC Read & Write
This parameter is valid only when the [PARA]JNRSCGRP[/PARA] parameter in [MML]ADD TREELNKPVC[/MML] is set to ENABLE.
Timeslot Cross Read & Write
Tree Link PVC Read & Write
Tree Link PVC None Read & Write
IUBCP None Read & Write
IP Path Read & Write
Fractional ATM Read & Write
The number of [PARA]DSTTSN[/PARA] and [PARA]SRCTSN[/PARA] timeslots must be equal.
It is valid when [PARA]VST[/PARA] is VC_SWITCH in [MML]ADD TREELNKPVC[/MML].
This parameter is valid only when the [PARA]PT[/PARA] parameter in [MML]ADD IPPATH[/MML] is set to ETH.
The value range is 0~3 when [PARA]SBT[/PARA] is set to BASE_BOARD;The value range is 0~7 when [PARA]SBT[/PARA] is set to E1_COVERBOARD;
Cell Read & Write
Cell None Read & Write
Cell Read & Write
Cell Read & Write
Cell Read & Write
Cell None Read & Write
Cell Read & Write
Cell Read & Write
It is valid when [PARA]NSEHICHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].
It is valid when [PARA]NSEHICHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].
It is valid when [PARA]NSEHICHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].
It is valid when [PARA]NSERGCHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].
It is valid when [PARA]NSERGCHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].
It is valid when [PARA]NSERGCHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].
IP Path Read & Write
STM1 None Read & Write
NCMU None Read & Write
NCMU None Read & Write
This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PARA] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
IMA Group None Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
The parameter is valid when [PARA]AIDST[/PARA] in [MML]SET OBJALMSHLD[/MML]is set to "ONEBYONE".
The parameter is valid when [PARA]SN[/PARA] in [MML]SET OBJALMSHLD[/MML]is valid.
You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD
You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD
NodeB None Read & Write
NodeB None Read & Write
Cell None Read & Write
NodeB Read & Write[PARA]OTH[/PARA] is more than [PARA]LTH[/PARA] in [MML]SET THAT[/MML]
NodeB Read & Write
NodeB Read & Write
Read & Write
IMA Link Read & Write
NodeB Read & Write
This paramter is valid when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to IF.The value range is 0~7 when [PARA]PT[/PARA] is PPP and [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~15 when [PARA]PT[/PARA] is PPP and [PARA]SBT[/PARA] is E1_COVERBOARD;The value range is 0~1 when [PARA]PT[/PARA] is MPGRP and [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]PT[/PARA] is MPGRP and [PARA]SBT[/PARA] is E1_COVERBOARD;
This parameter is valid only when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to IF.
IMA Group(ADD IMAGRP)IMA Link(ADD IMALNK)
The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD;
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD;
This parameter is valid only when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN.
NodeB Read & Write
None Read & Write
Read & Write
None Read & Write
NodeB None Read & Write
IUBCP Read & Write
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)
MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
AAL2 Path(ADD AAL2PATH)IP Path(ADD IPPATH)SAAL(ADD SAALLNK)Tree Link PVC(ADD TREELNKPVC)
The value range is 0~63 when [PARA]BEAR[/PARA] in [MML]ADD IUBCP[/MML] is set to ATM.
IUBCP Read & Write
NodeB None Read & Write
Read & Write
NodeB Read & Write
NodeB None Read & Write
SCTP None Read & Write
NodeB Read & Write
NodeB None Read & Write
The value range is 0~19 when [PARA]BEAR[/PARA] in [MML]ADD IUBCP[/MML] is set to IPV4.
MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
This parameter is valid when [PARA]TP[/PARA] in [MML]ADD RRU[/MML] is set to "BRANCH"
IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
Read Only
Read & Write
Value Range:BTS3900:UPEA/ UPEB:0~7MRRU:0~6RHUB:0~3PRRU:0NEMU:0~35BTS3900A:UPEA/UPEB:0~7MRRU:0~6RHUB:0~3PRRU:0NPMU:5~7DBS3900:UPEA/UPEB:0~7MRRU:0~6RHUB:0~3PRRU:0NEMU:0~35NPMU:5~7
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD.
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD.
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD.
Tree Link PVC(ADD TREELNKPVC)AAL2 Path(ADD AAL2PATH)
SAAL
This parameter is valid when [PARA]ST[/PARA] is set to UBR+, and its value should be smaller than the value of [PARA]PCR[/PARA].
Read & Write
IMA Group Read & Write
MLPPP Group Read & Write
NodeB None Read & Write
NodeB None Read & Write
AAL2 Path(ADD AAL2PATH)Tree Link PVC(ADD TREELNKPVC)
This parameter is valid only when the [PARA]ST[/PARA] is UBR+, and the value of this parameter is smaller than the [PARA]PCR[/PARA] value.
The value range is 1~4 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 1~8 when [PARA]SBT[/PARA] is E1_COVERBOARD;
The value of this parameter cannot be smaller than that of [PARA]MPDADT[/PARA].
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB
NodeB None Read & Write
MLPPP Group Read & Write
NodeB Read & Write
when the ALD system type [PARA]AST[/PARA] in [MML]SET ALDPWRSW[/MML] is set to "custom", the value range is between R0A, R0B and RET_PORT;when the ALD system type [PARA]AST[/PARA] in [MML]SET ALDPWRSWALD[/MML] is set to "RET_ONLY_MULTICORE", the value range is only RET_PORT;otherwise the value range is between R0A and R0B.For the WRFU subrack, the value range is between N0A and N5A, N0B and N5B.For the RRU, if the ALD system type is custom, the value range is between R0A, R0B and RET_PORT, if the ALD system type is RET_ONLY_MULTICORE, the value range is only RET_PORT, otherwise the value range is between R0A and R0B.
When MODE = CUSTOM, this parameter is valid. If the parameter is not specified, the existing type is not changed.
[PARA]PTYPE[/PARA] is valid while [PARA]CS[/PARA]=CONFIGED in [MML]SET PWRSYSCFG[/MML]
The value of this parameter cannot be greater than that of [PARA]MPDAAT[/PARA].
[PARA]PWD[/PARA] is valid while [PARA]PKPEnableSta[/PARA]=Enable in [MML]SET CERTFILE[/MML].
NodeB Read & Write
Cell None Read & Write
Cell This para is valid for distribution cell. Read & Write
NodeB None Read & Write
This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]
Cell None Read & Write
NodeB None Read Only
Read & Write
NodeB None Read & Write
NodeB None Read & Write
None Read & Write
NodeB None Read & Write
NodeB None Read & Write
Cell None Read & Write
NodeB None Read & Write
Cell Read & Write
MLPPP Group(ADD MPGRP)MLPPP Link(ADD MPLNK)
The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD;
MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)
It is valid when [PARA]RMTCM[/PARA] is TRUE in [MML]ADD LOCELL[/MML].
Cell None Read & Write
NodeB None Read & Write
None Read & Write
NodeB None Read & Write
Cell Read & Write
NodeB None Read Only
Cell None Read & Write
NodeB Read & Write
NodeB None Read & Write
MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)
This parameter is valid noly When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR.
This parameter is valid when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to NEXTHOP.
Cell None Read & Write
NodeB Read & Write
Timeslot Cross Read & Write
Tree Link PVC None Read & Write
NodeB Read Only
IP Path None Read & Write
NodeB None Read Only
NodeB Read & Write
This parameter is valid only when [PARA]RSTMODE[/PARA] in [MML]SET CFGFILEENB[/MML] is set to "ENABLE".
The value range of [PARA]SRCSN[/PARA] is 0~7 when [PARA]NO[/PARA] is 0~7.The value range of [PARA]SRCSN[/PARA] is 0~5 when [PARA]NO[/PARA] is 8~15.
Value Range:BTS3900&BTS3900A:MRRU, RHUB, PRRU , WRFU DBS3900:MRRU, RHUB , PRRU
The LOCAL node must already exist before the HUB node is added.
NodeB None Read & Write
AAL2 Path None Read & Write
NodeB None Read Only
NodeB None Read Only
NodeB None Read & Write
IP Path None Read & Write
IP Path None Read & Write
AAL2 Path None Read & Write
SAAL Read & Write
NodeB None Read & Write
NodeB Read & Write
When the [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].
This parameter is valid only when [PARA]SBS[/PARA] in [MML]SET SUBBRD[/MML] is set to "YES".
When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD.When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD
When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD.When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD
It is valid when [PARA]SCCHPWRCM[/PARA] is FIXED in [MML]SET MACHSPARA[/MML].
Cell None Read & Write
Cell None Read & Write
Read & Write
None Read & Write
SCTP None Read & Write
None Read & Write
Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
Battery None Read & Write
AAL2 Path(ADD AAL2PATH)Tree Link PVC(ADD TREELNKPVC)
When the [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].
The value range is 0~7 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~15 when [PARA]SBT[/PARA] is E1_COVERBOARD;
[PARA]SDAY[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].
Battery None Read & Write
Read & Write
Cell Read Only
NodeB Read & Write
AAL2 Path None Read & Write
Cell Read Only
No Read & Write
No Read & Write
MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)
This parameter is mandatory if [PARA]AUTH[/PARA] is not NONAUTH.
For BTS:When the value of [PARA]SECT[/PARA] is LOCAL_SECTOR, It's valua is 0~5.
This parameter is valid when the operating mode is SECTOR.
For BTS, The para LOCAL_SECTOR of [MML]ADD SEC[/MML] is valid and optional, When [PARA]SECT[/PARA] is LOCAL_SECTOR, It's value should be 4 or 5. For DBS, When [PARA]SECT[/PARA] is REMOTE_SECTOR, It's value should be ROA and R0B
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V1.1.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V2.0_3GPP.
Cell Read & Write
Cell None Read & Write
Cell Read & Write
Cell Read & Write
Cell Read & Write
Cell None Read & Write
Cell Read & Write
Cell Read & Write
It is valid when [PARA]SEHICHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].
It is valid when [PARA]SEHICHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].
It is valid when [PARA]SEHICHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].
It is valid when [PARA]SERGCHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].
It is valid when [PARA]SERGCHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].
It is valid when [PARA]SERGCHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].
NodeB None Read & Write
No Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
None Read & Write
Cell Read & Write
IP Path None Read & Write
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to DEV .
MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)
It is valid when [PARA]SEHICHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].
NodeB Read & Write
Cell None Read & Write
NodeB Read & Write
[PARA]SM[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].
[PARA]SMONTH[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].
NodeB Read Only
Cabinet No. Subrack No. Slot No. Board type 0 0 0~3 WBBPa (WCDMA BaseBand Process unit type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 0~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit)0 4 0~5 WRFU (WCDMA Radio Frequency Unit) 0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 11 0 NFAN (NodeB FAN Box) 0 20~254 0 MRRU\RHUB\PRRU (Radio Remote Unit)
When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 0.When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value range is 0~5.
When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 0.When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value range is 0~5.
This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR
This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR
The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "VOLTAGE".
NEMU Read & Write
NEMU Read & Write
NEMU Read & Write
NodeB Read & Write
Read & Write
Cell Read & Write
The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "CURRENT".
The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "VOLTAGE".This parameter value must be greater than [PARA]SOLL[/PARA] in [MML]SET NEMUANLGIN[/MML].
The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "CURRENT";This parameter value must be greater than [PARA]SOLL[/PARA] in [MML]SET NEMUANLGIN[/MML].
This parameter is valid only when [PARA]SW[/PARA] in [MML]SET SNTPCLTPARA[/MML] is set to "ON".
This parameter is valid only when the [PARA]JNRSCGRP[/PARA] in the MML command is ENABLE.
This parameter is valid noly When the [PARA]HISPM[/PARA] in [MML]ADD LOCELL[/MML] is TRUE.
No involved None Read & Write
NodeB Read Only
NodeB Read Only
NodeB Read Only
The value range is 0~1 when [PARA]SRCPT[/PARA] is IMA and [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]SRCPT[/PARA] is IMA and [PARA]SRCSBT[/PARA] is E1_COVERBOARD;The value range is 0~3 when [PARA]SRCPT[/PARA] is UNI and [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SRCPT[/PARA] is UNI and [PARA]SRCSBT[/PARA] is E1_COVERBOARD;
The value range is 0~3 when [PARA]SRCPT[/PARA] is FRAATM and [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SRCPT[/PARA] is FRAATM and [PARA]SRCSBT[/PARA] is E1_COVERBOARD;
The value range is 0~3 when [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SRCSBT[/PARA] is E1_COVERBOARD;
NodeB None Read Only
STM1 Read & Write
Read Only
Read Only
NodeB None Read Only
NodeB Read Only
NodeB None Read Only
NodeB Read & Write
This parameter is valid when the [PARA]SBT[/PARA] parameter is CHANNELLED_COVERBOARD and [PARA]SW[/PARA] is set to ENABLE in [MML]SET SDHJ0J1J2[/MML]. Only ENABLE is valid when [PARA]TB[/PARA] is J2.
NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)
When the value range of [PARA]SRCSN[/PARA] is 6~7, [PARA]SRCSBT[/PARA] is BASE_BOARD.
NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)
When the value range of [PARA]SRCSN[/PARA] is 0~5, [PARA]SRCSBT[/PARA] is E1_COVERBOARD.
The value range is 0~7 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 0~7;The value range is 0~5 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 8~15;The [PARA]SRCSN[/PARA] and [PARA]DSTSN[/PARA] should be different.
When SBT is BASE_BOARD, choose NEXTHOP or IFWhen SBT is E1_COVERBOARD, choose IF
None None Read & Write
IP Path Read & Write
Cell Read & Write
NodeB Read Only
The value range is 8~100000 when [PARA]PT[/PARA] is ETH;The value range is 8~1984 when [PARA]PT[/PARA] is PPP;The value range is 8~31744 when [PARA]PT[/PARA] is MPGRP;
It is valid when [PARA]SEHICHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].
0 0 0~3 WBBPa (WCDMA BaseBand Process unit type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 4~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit)0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 8 0~1 NCMU (NodeB Climate Monitoring Unit)
When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value of this para is 4~5.
When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value of this para is 4~5.
This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR
This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR
STM1 Read & Write
STM1 Read & Write
STM1 Read & Write
SAAL None Read & Write
Tree Link PVC Read & Write
This parameter is valid when the [PARA]RSW[/PARA] is ENABLE.When [PARA]TB[/PARA] is J0: TRACE_1BYTE and TRACE_16BYTE and TRACE_64BYTE is valid.When [PARA]TB[/PARA] is J1: TRACE_16BYTE and TRACE_64BYTE is valid.When [PARA]TB[/PARA] is J2: TRACE_16BYTE is valid.
This parameter is valid when the [PARA]RSW[/PARA] is ENABLE.It should be A integer(0~255) or a string consist of single space, A-Z, a-z, 0-9.When [PARA]RXT[/PARA] is TRACE_1BYTE, it should be an integer(0~255).When [PARA]RXT[/PARA] is TRACE_16BYTE, it should be a string which length is not more than 15.When [PARA]RXT[/PARA] is TRACE_64BYTE, it should be a string which length is not more than 62.
This parameter is valid when [PARA]RXT[/PARA] is TRACE_16BYTE or TRACE_64BYTE.
This parameter is valid when in [MML]ADD TREELNKPVC[/MML] [PARA]ST[/PARA] is set to RTVBR or NRTVBR, and its value should be less than the [PARA]PCR[/PARA].
NodeB Read & Write
NodeB None Read & Write
AAL2 Path Read & Write
NodeB None Read Only
NodeB Read & Write
NodeB None Read & Write
[PARA]ST[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].
This parameter is valid only when [PARA]ST[/PARA] in [MML]ADD AAL2PATH[/MML] is set to RTVBR or NRTVBR, and the value of this parameter should be smaller than the [PARA]PCR[/PARA] value.
This parameter is valid when the operating mode is SECTOR.
For the UNI link on the baseboard, the scrambling mode must be enabled when the line code of AMI is used by the E1/T1 link. If the line code of AMI is used by an IMA link of the IMA group, the scrambling mode of the IMA group must be enabled.
This parameter is invalid when [PARA]DEVTP[/PARA] in [MML]ADD ALD[/MML] is set to "SINGLE_RET"
[PARA]SWEEK[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or WEEK in [MML]SET TZ[/MML].
SCTP None Read & Write
NodeB None Read & Write
Cell None Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB Read & Write
Tree Link PVC Read & Write
Battery Read & Write
[PARA]SWSEQ[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA]=WEEK in [MML]SET TZ[/MML].
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"
This parameter is valid only when [PARA]JNRSCGRP[/PARA] in [MML]ADD TREELNKPVC[/MML] is set to ENABLE.
The TDSTM is valid only when [PARA]ATMODE[/PARA] in [MML]SET BATATPA[/MML] is set to PERIOD or PERIODPOWERCUT.The DDSTM value must be smaller than TDSTM value.
NodeB None Read & Write
No Read & Write
No Read & Write
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to OPE and [PARA]DEVVER[/PARA] is set to V1.1.
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
Timeslot Cross Read & Write
Tree Link PVC Read & Write
Tree Link PVC None Read & Write
No Read & Write
[ADD TSCROSS]When the source or destination port of the timeslot cross connection is carried at the WMPT, TscrossNo ranges from 0 to 7. When the source or destination ports of the timeslot cross connection are carried at the UAEC, TscrossNo ranges from 0 to 15. The source E1/T1 link over which timeslot cross connection is configured cannot carry the IMA/UNI/FRAATM link or the PPP/MP link.For a timeslot cross connection, the source and destination timeslots can be different timeslots at different boards. The number of source timeslots, however, must be equal to that of the destination timeslots.If the sub-board type is BASE_BOARD, only eight timeslot cross connections are supported.The number of [PARA]DSTTSN[/PARA] and [PARA]SRCTSN[/PARA] timeslots must be equal.
This parameter is valid only when [PARA]VST[/PARA] in [MML]ADD TREELNKPVC[/MML] is set to VC_SWITCH.
[PARA]TLL[/PARA] is less than [PARA]TUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]
NCMU None Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
Tree Link PVC None Read & Write
AAL2 Path None Read & Write
It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].
[PARA]TO[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"
STM1 Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
No Read & Write
IP Path Read & Write
STM1 Read & Write
STM1 Read & Write
The value is 0 when [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD;The value range is 0~1 when [PARA]SBT[/PARA] is UNCHANNELLED_COVERBOARD;
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"
[PARA]TLL[/PARA] is less than [PARA]TUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]
This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PARA] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.
Only ENABLE is valid when [PARA]TB[/PARA] is J2.
The value range is J0~J2 when [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD;The value range is J0~J1 when [PARA]SBT[/PARA] is UNCHANNELLED_COVERBOARD;
IP Path Read & Write
None Read & Write
NodeB None Read & Write
NodeB None Read & Write
None Read & Write
This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PARA] is set to ENABLE.
The value range is 8~100000 when [PARA]PT[/PARA] is ETH.The value range is 8~1984 when [PARA]PT[/PARA] is PPP.The value range is 8~31744 when [PARA]PT[/PARA] is MPGRP.
You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD
NodeB Read & Write
NodeB Read & Write
Cell Read & Write
Cell Read & Write
Cell Read & Write
Cell Read & Write
UL is more than [PARA]LL[/PARA] in [MML]SET NEMUINVLIMIT[/MML]
When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is VALUE, this parameter is valid.
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.
Cell None Read & Write
NodeB None Read Only
Cell None Read Only
IP Path None Read & Write
IP Path None Read & Write
NodeB Read & Write
Cell None Read & Write
NodeB None Read & Write
You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD
STM1 Read & Write
STM1 Read & Write
NodeB None Read & Write
STM1 Read & Write
This parameter is valid when [PARA]SW[/PARA] is ENABLEWhen [PARA]SBT[/PARA] is UNCHANNELLED_COVERBOARD, only TRACE_64BYTE is valid.When [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD:For [PARA]TB[/PARA]=J0, TRACE_1BYTE , TRACE_16BYTE and TRACE_64BYTE are valid.For [PARA]TB[/PARA]=J1, TRACE_16BYTE and TRACE_64BYTE are valid.For [PARA]TB[/PARA]=J2, TRACE_16BYTE is valid.
This parameter is valid when [PARA]SW[/PARA] is ENABLE.It should be A integer(0~255) or a string consist of single space, A-Z, a-z, 0-9.When [PARA]TXT[/PARA]=TRACE_1BYTE, it should be an integer(0~255).When [PARA]TXT[/PARA]=TRACE_16BYTE, it should be a string which length is not more than 15.When [PARA]TXT[/PARA]=TRACE_64BYTE, it should be a string which length is not more than 62.
This parameter is valid when [PARA]TXT[/PARA] is TRACE_16BYTE or TRACE_64BYTE.
Read & Write
UNI Link Read & Write
None Read & Write
IMA Group None Read & Write
NodeB Read & Write
NodeB Read & Write
NodeB None Read & Write
NodeB Read & Write
None Read & Write
MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)
This parameter is mandatory if [PARA]AUTH[/PARA] is not NONAUTH.
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.
AAL2 Path(ADD AAL2PATH)SAAL(ADD SAALLNK)
[SET VLANCLASS]A parameter is added.Only eight different VLAN IDs are allowed.This parameter is valid only when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN.
This parameter is valid when in [MML]ADD VLANMAP[/MML] [PARA]VLANMODE[/PARA] is set to SINGLEVLAN and [PARA]INSTAG[/PARA] is set to ENABLE.
This parameter is valid when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN and [PARA]INSTAG[/PARA] in [MML]ADD VLANMAP[/MML] is set to ENABLE.
AAL2 Path(ADD AAL2PATH)SAAL(ADD SAALLNK)
Tree Link PVC None Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
When the para [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is DEM_2_CHAN, There will be 1 or 2 antena; When the para [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is DEM_4_CHAN or DEM_ECON_4_CHAN, There will be 1 or 2 or 4 antenas;
RRU None Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU None Read & Write
RRU Read & Write
RRU Read & Write
This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.
This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.
This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.
This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.
This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.
This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 1~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 1~8.
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 2~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 2~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 3~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 3~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 4~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 4~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 5~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 5~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 6~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 6~8.
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
NodeB The Rate Unit of a NodeB is unitive Read & Write
NodeB None Read & Write
NodeB Read & Write
NodeB None Read & Write
ETH OAM None Read & Write
ETH OAM None Read & Write
ETH OAM None Read & Write
ETH OAM None Read & Write
NodeB None Read & Write
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 7~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 7~8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 8.
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 8.
This parameter is valid when [PARA]ICPT[/PARA] in [MML]ADD IPCLKLNK[/MML] is set to PTP.
ETH OAM None Read & Write
ETH OAM None Read & Write
ETH OAM None Read & Write
ETH OAM None Read & Write
ETH OAM Read & Write
ETH OAM Read Only
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
When [PARA]SBT[/PARA] is BASE_BOARD, choose ETH(ETH);When [PARA]SBT[/PARA] is ETH_COVERBOARD, choose ETH(ETH), ETHTRK(ETHTRK);
The value range is 0~3 when [PARA]PT[/PARA] is ETH.The value range is 0~1 when [PARA]PT[/PARA] is ETHTRK.
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read & Write
NodeB None Read Only
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell Read & Write
Cell None Read & Write
This parameter is valid when [PARA]HSSCCHPWRCTRLMETHODINDCH[/PARA] in [MML]SET MACHSPARA[/MML] is set to CQI
Cell None Read & Write
Cell Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
Cell None Read & Write
CELL None Read & Write
CELL None Read & Write
NodeB None Read & Write
RRU None Read & Write
RRU None Read & Write
This parameter is valid when [PARA]CQIADJALGOFCON[/PARA] in [MML]SET MACHSPARA[/MML] is set to CQI_ADJ_BY_RBLER
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU None Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
RRU Read & Write
The parameter is valid when the detect switch is set to ON.
The parameter is valid when the detect switch is set to ON.
The parameter is valid when the detect switch is set to ON.
The parameter is valid when the detect switch is set to ON.
The parameter is valid when the detect switch is set to ON.
When [PARA]SBT[/PARA] is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM);When [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD, choose IMA (IMAGRP) or UNI (UNILNK);When [PARA]SBT[/PARA] is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1);When [PARA]SBT[/PARA] is E1_COVERBOARD, choose IMA (IMAGRP), UNI (UNILNK).
When [PARA]SBT[/PARA] is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM);When [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD, choose IMA (IMAGRP) or UNI (UNILNK);When [PARA]SBT[/PARA] is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1);When [PARA]SBT[/PARA] is E1_COVERBOARD, choose IMA (IMAGRP), UNI (UNILNK).
Service Interrupted During Modification Interruption Scope
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Y NodeB
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Y NodeB
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Y The board be actived
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved NodeB
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved NodeB
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Y NodeB
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Y Port
Not involved Not involved
Not involved Not involved
Y Port
Y Port
Y Port
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Y Port
Y Port
Not involved Not involved
Y Port
Y Port
Y Port
Y NodeB
Y NodeB
Not involved Not involved
Not involved Not involved
Y Port
Y Port
Y Port
Y Port
Y Port
Y Port
Y Port
Not involved Not involved
Y Port
Y Port
Y Port
Not involved Not involved
Y Port
Y Port
Port
N (No impact on the UE in idle mode) Not involved
Y NodeB
Y NodeB
Not involved Not involved
Y(SET ETHPORT)N(ADD ETHTRK)
Not involved Not involved
Y NodeB
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Y NodeB
Y NodeB
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Y NodeB
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Y NodeB
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Y NodeB
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved NodeB
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Y NodeB
Not involved NodeB
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Y NodeB
Y NodeB
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) Not involved
N Not involved
N Not involved
N Not involved
N Not involved
N Not involved
Not involved Not involved
Not involved Not involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
No involved No involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
No involved No involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
Not involved Not involved
No involved
Not involved Not involved
The parameter modification has no impact on the equipment.
Interruption Duration(Min) Caution
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
To modify the Mac-hs maximum resource limit ratio parameters of the specified local cell, ensure that the local cell supports HSDPA.
To modify the Mac-hs maximum resource limit ratio parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
The ARP proxy needs to be enabled when the local IP address of the OM channel is in the same subnet as the IP address of the Ethernet port on the board of the same slot.
The gain range supported by the STMA varies with models and vendors. It is recommended that you list the gain range supported by the STMA by running the DSP TMAFUN command before setting the gain.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 110 V AC power is supplied to the NPMU.
Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.
The parameter modification has no impact on the equipment.
After the NodeB is started, the time delay for starting BOOTP is set to 15 min by default, during which if the OM channel returns to normal, the time delay for starting BOOTP will be set to "BootpTime" in this command and the default value is 500000 min. If the time delay for starting BOOTP is set to 15 min, after the OM channel is in abnormal status for 15 min, and the NCP is also abnormal, BOOTP will be started. Every time the OM channel is found in normal state, the time delay for starting BOOTP will be set to BootpTime in this command. If you set the BootpTime to a relatively short period of time to trigger a BOOTP start, then it is recommended that you set the BootpTime to the default value 500000 min when the OM channel returns to normal. In this way, the BOOTP mistriggering caused by transmission intermittent can be prevented.
The parameter modification has no impact on the equipment.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
After you set an alarm to be shielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. Then, when the alarm is cleared manually, the NodeB generates the alarm clearance report. If the alarm does not exist at that time, the NodeB does not generate the alarm occurrence report or clearance report.When you set an alarm to be unshielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. If the alarm does not exist at that time, the NodeB does not generate any report.After you set an alarm to be unshielded, the NodeB handles the alarm in a normal way. If the alarm is generated, the NodeB generates the alarm occurrence report. If the alarm is cleared, the NodeB generates the alarm clearance report.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involvedReducing the Bit Error Rate (BER) threshold of the NodeB lowers the upper limit of the BER alarm threshold.
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The configuration takes effect immediately after the parameter is modified.This command is valid only for the NEMU manufactured by Huawei.
The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.
The service is affected until the configuration is correct.
When no TMA is used, the attenuation value is set to 0. When the 12 dB TMA is used, the attenuation value is set between 4 dB to 11 dB. When the 24 dB TMA is used, the attenuation value is set between 11 dB and 22 dB.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This command can be run only by the network administrator.After the command is sent, the NE uses a corresponding authentication mode at the next SSL connection. This command does not affect the existing connections.When the identity is authenticated, the NE must be configured with the root certificate, public key certificate, and private key certificate. If any of the certificates is not configured, a message is displayed, reporting that a certificate is not configured.
The parameter modification has no impact on the equipment.
When multiple NodeBs are cascaded, a lower-level node is connected to an upper-level one through E1/T1 cables and extracts the clock from the E1/T1 cables. Therefore, the clock mode of the upper-level node must be set as master and that of the lower level node must be set as slave.
The configuration takes effect immediately after the parameter is modified.This command is valid only for the NEMU manufactured by Huawei.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
APM100:Battery Capacity(AH):100;Battery Current Limiting Coefficient:0.15APM200:Battery Capacity(AH):200;Battery Current Limiting Coefficient:0.15APM30: Battery Capacity(AH):36; Battery Current Limiting Coefficient:0.07
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The value must be larger than the value of the FCVOL and between 43.2 and 57.6.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The link is regarded as not congested when the discard rate is lower than or equal to this threshold, and thus the congestion judgement may be influenced by [PARA]DR[/PARA].
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The backup mode of the chain or ring decides whether the CPRI hot redundancy is supported by the equipment on the chain or ring. Currently only the MRRU supports the CPRI hot redundancy. In this case, the backup mode should be set as hot redundancy.
The parameter modification has no impact on the equipment.
If this switch is not enabled, the added SLAVE CP channel will not take effect. If you disable this switch when the NodeB is using the SLAVE CP channel, the NodeB does not switch to the MASTER CP when the MASTER CP is restored. This switch should be consistent with that of the RNC to ensure communication.
The service is affected until the RRU Chain configuration is correct
For an RRU chain, only one break point can be set and the chain can be divided into two parts:Part one consists of the RRUs between the chain head and the break point position. The services of the RRUs in this part are not affected.Part two consists of the RRUs between the break point position and the chain tail. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. You can run the DSP RRUCHAINSTATE command to query the attributes of the CPRI interfaces of the RRU.For an RRU ring, two break points can be set and the ring can be divided into three parts:Part one consists of the RRUs between the ring head and the first break point position. The services of the RRUs in this part may be affected.Part two consists of the RRUs between the break point positions. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command.Part three consists of the RRUs between the second break point position and the ring tail. The services of the RRUs in this part may be affected.For an RRU ring, the value of Break Point1 should be larger than that of Break Point2. For an RRU chain, only the value of Break Point1 can be set. You can run the command to adjust the break point position of the RRU chain/ring. You can run the RMV RRUCHAINBRKPOS command to cancel the break point.
Not involved
Not involved
Not involved
Not involved
Not involved
For an RRU chain, only one break point can be set and the chain can be divided into two parts:Part one consists of the RRUs between the chain head and the break point position. The services of the RRUs in this part are not affected.Part two consists of the RRUs between the break point position and the chain tail. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. You can run the DSP RRUCHAINSTATE command to query the attributes of the CPRI interfaces of the RRU.For an RRU ring, two break points can be set and the ring can be divided into three parts:Part one consists of the RRUs between the ring head and the first break point position. The services of the RRUs in this part may be affected.Part two consists of the RRUs between the break point positions. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command.Part three consists of the RRUs between the second break point position and the ring tail. The services of the RRUs in this part may be affected.For an RRU ring, the value of Break Point1 should be larger than that of Break Point2. For an RRU chain, only the value of Break Point1 can be set. You can run the command to adjust the break point position of the RRU chain/ring. You can run the RMV RRUCHAINBRKPOS command to cancel the break point.
To enable the DHCP Relay function, you need to run [MML]ADD DHCPSVRIP[/MML] to add the DHCP Server IP address, and you may need to run [MML]ADD IPRT[/MML] to add related routes to ensure the current NodeB can communicate with this IP address.
The parameter modification has no impact on the equipment.
The BSDV is valid only when the BSDF is set to ENABLE.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Until be actived successfully. This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The gain range supported by the SASU varies with models and vendors. It is recommended that you list the gain range supported by the SASU by running the DSP SASUFUN command before setting the gain.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
For the E1 lines, the 75-ohm and 120-ohm modes are supported; for the T1 lines, only the 100-ohm mode is supported. After you modify the line impedance by running this command, you must reset the Iub interface board manually to make your modification valid.
If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in free-run mode.The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source.Ensure that the clock source is available before running the command.If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully.The command cannot be run when the clock quality test is being performed.If the system responds with a "Clock source is unavailable" message after you run the command, do as follows:For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command.For the GPS card clock source, check whether the GPS is configured through the DSP GPS command. If the system responds with no information, you can infer that the NodeB does not support the GPS. If the system responds with some information, you can infer that the GPS is faulty. Handle the fault first.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involvedThe parameter modification has no impact on the equipment.
Not involved
Not involved This parameter cannot be modified.
Not involved
The parameter modification has no impact on the equipment.
The IP address takes effect immediately after it is configured. For local maintenance, this command might cause the interruption of the maintenance channel. The IP address and the subnet mask must be valid. Any one of the IP addresses of the local maintenance channel, Ethernet port, and Operation and Maintenance (OM) IP address must be unique. The IP addresses of the FE port, local maintenance channel, and remote maintenance channel must be in different network segments and are free from the inclusion relation.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
An auxiliary power system can supply power to multiple RRUs. One RRU controls this auxiliary power system.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Modifying battery installation time will clear all the saved battery test results of NPMU. The NPMU restarts saving battery test result.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
The DC load is used to simulate a TMA in the BS system. In some situations, when a high gain is set on the BS RX path through the WCDMA NodeB, the SASU should notify the BS BTS that a TMA is connected to the antenna system. It is preferable to install a DC load to the BS BTS. In this way, the BS BTS can be notified about the TMA on the antenna system when the DC current on the antenna system is detected.The BS DC load cannot be enabled if the DC power switch state of the SASU is set to BS power supply mode.
Not involved
Not involved
Not involved
Not involved
Not involved
The BS DC load will be automatically changed to 7 after the antenna DC power switch state is set to BS power supply mode.The antenna DC power switch state of the SASU is only set on the main antenna port. If you set the switch state not on the main antenna port, it responds with a Not Supported message.This setting is effective in both subunits of the SASU simultaneously.
Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.
Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.
The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.
This parameter cannot be modified when the logical cell exists.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
The parameter cannot be equal to [PARA]PEERIP[/PARA]. It is not displayed when the value of [PARA]LM[/PARA] is set to ALL or NOLOOP.
After this parameter is set, the receiver sensibility will be reduced. Adjust the receiver sensibility according to network planning and optimization.
Modifying delay may affect normal access of a cell; The heavier the load in the cell is, the more obvious the impact is.
Modifying delay may affect normal access services of a cell; The heavier the load in the cell is, the more obvious the impact is.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
Modifying delay may affect normal access services of a cell; The heavier the load in the cell is, the more obvious the impact is.
Modifying delay may affect normal access services of a cell; the heavier the load in the cell is, the more obvious the impact is.
This parameter cannot be modified when the logical cell exists; The downlink and uplink frequencies of the local cell must stay within the same frequency band; If the power amplify unit can only support two carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 5MHz(25*0.2MHz); If the power amplify unit can support four carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 15MHz(75*0.2MHz).
When the logical cell does not exist, you can modify the downlink resource group; if the downlink resource group does not exist or the downlink resource group is not the subset of the uplink resource group, the execution of the command fails.
The parameter cannot be equal to [PARA]PEERIP[/PARA]. It is not displayed when the value of [PARA]LM[/PARA] is set to ALL or NOLOOP.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The IP address takes effect immediately after it is configured. For local maintenance, this command might cause the interruption of the maintenance channel. The IP address and the subnet mask must be valid. Any one of the IP addresses of the local maintenance channel, Ethernet port, and Operation and Maintenance (OM) IP address must be unique. The IP addresses of the FE port, local maintenance channel, and remote maintenance channel must be in different network segments and are free from the inclusion relation.
The Alarm Report Synchronization will be affected when the parameter is modified.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved
Not involved
After you modify the E1/T1 bearing mode of the Iub interface board by running this command, you must reset the board manually to make your modification valid. The parameter can be modified only when the board supports this bearing mode.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
If the value of [PARA]OMPRI[/PARA] is larger than that of the other sevices, the OM channel will use the bandwidth of the other sevices on the same physical port.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
When the encryption mode for transmission is set to AUTO, the FTP client tries to transmit data in encryption mode first. If the transmission fails, the FTP client transmits data in plain text mode.If the FTP client is set to support firewalls, the FTP client sends the CCC command to switch the data transmitted in the control command channel to plain text.After this command is run successfully, the settings take effect in the next FTP operation.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The value must be greater than the value of the DCVLL plus two and less than that of the BCVOL.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
You can successfully enable or disable the backup function of the WMPT through this command if this function is previously enabled or disabled.The WMPT backup flag in the initial data configuration file is ENABLE.The modified WMPT backup flag is stored in the data configuration file. Therefore, the flag is still valid after the NodeB is restarted.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
Ensure that the transmission resource group to be modified does exist, and the bandwidth of the transmission resource group after modification should not be greater than the bandwidth of the physical port carrying them. If the bearing type of the transmission resource group is IPV4, the bandwidth of the transmission resource group after modification should not be smaller than the bandwidth of IPPATH added to the transmission resource group.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
If the value of [PARA]SIGPRI[/PARA] is smaller than that of the other sevices, the user access may be affected.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved RRU num must be greater or equal than 2.
The parameter modification has no impact on the equipment.
The gain range supported by the STMA varies with models and vendors. It is recommended that you list the gain range supported by the STMA by running the DSP TMAFUN command before setting the gain.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The running of the command fails if the WMPT is not configured with a GPS card.For GPS feeders delivered by Huawei Technologies Co. Ltd., the delay equals the feeder length (m) multiplied by 3.8 (ns/m).For feeders delivered by other vendors, contact the corresponding vendors about the delay
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified when the logical cell exists.
There must be a gap of no less than 5% between the upper limit and the lower limit of the humidity.
The inner handover radius of the local cell must not be greater than cell radius.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
For details, refer to <a href="BTS3836-CABINET.htm">Subrack Information Table</a>.
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
Not involved
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Heater Start Temperature must be smaller than that of the Heater Close Temperature.The value of the Heater Close Temperature should not be set too large. Otherwise, the heat dissipation of the system will be affected.This command can be run successfully for the NCMU in the auxiliary power system of the RRU or BBU only when the power system is the APM30.It is recommended that you obtain the current heater parameter values by running the LST HTPA command before setting the threshold to avoid configuration mistakes.
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
Not involved
Not involved
Not involved
Not involved
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Heater Start Temperature must be smaller than that of the Heater Close Temperature.The value of the Heater Close Temperature should not be set too large. Otherwise, the heat dissipation of the system will be affected.This command can be run successfully for the NCMU in the auxiliary power system of the RRU or BBU only when the power system is the APM30.It is recommended that you obtain the current heater parameter values by running the LST HTPA command before setting the threshold to avoid configuration mistakes.
There must be a gap of no less than 5% between the upper limit and the lower limit of the humidity.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
This parameter indicates the maximum length of the FP before multiplexing. The FP can be multiplexed only when its frame length is smaller than this value.
Not involved
Not involved
Not involved Delay is introduced when the traffic is not busy.
Not involved
The parameter modification has no impact on the equipment.
The service is affected until the RRU Chain configuration is correct
The RRU IF offset is usually set by users in network planning. In general, it is recommended that this command be not run by users.The RRU IF offset value takes effect immediately after the parameter is modified.
The parameter modification has no impact on the equipment.
If this switch is enabled, system will detect Transmission Link Fault and try to recover it.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
When a port connects to an upper node such as RNC or upper NodeB, this port should be set as RECOVEDRX, while the port of the upper node should be set as EXT8K.When a port connects to a lower node, it should be set as EXT8K, while the port of the lower node should be set as RECOVEDRX.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The service is affected until the configuration is correct.
The service is interrupted if the [PARA]CBS[/PARA] value is set too small.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The service is affected until the configuration is correct.
The value of this parameter must be smaller than the physical interface rate.
Not involved
Not involved
The service is affected until the configuration is correct.
The value of this parameter must be smaller than the physical interface rate.
The service is affected until the configuration is correct.
This parameter must be consistent with the peer Ethernet interface.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The service is affected until the configuration is correct.
This parameter must be consistent with the [PARA]FRAME[/PARA] parameter of the peer E1/T1 interface.
The service is affected until the configuration is correct.
The available bandwidth of service is affected when [PARA]Function[/PARA] is set to ENABLE and [PARA]ULCIR[/PARA] is set too small.
Not involved
If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in free-run mode.The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source.Ensure that the clock source is available before running the command.If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully.The command cannot be run when the clock quality test is being performed.If the system responds with a "Clock source is unavailable" message after you run the command, do as follows:For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command.For the GPS card clock source, check whether the GPS is configured through the DSP GPS command. If the system responds with no information, you can infer that the NodeB does not support the GPS. If the system responds with some information, you can infer that the GPS is faulty. Handle the fault first.
The service is affected until the configuration is correct.
This parameter must be consistent with that of the peer Ethernet interface.
Not involved
Not involved
Not involved
Not involved
The service is re-established only when the loop is cancelled.
The service is affected when the [PARA]LM[/PARA] is set to REMOTE or LOCAL.
The service is re-established only when the loop is cancelled.
The loop back mode can be overwritten. The command only takes effect with the IP packets of the UDP protocol. This command cannot be executed with IP tracing at the same time. Some services may be interrupted.
The parameter modification has no impact on the equipment.
If the switch is set to ON, it is recommended that you run the LST VSWRLIMIT to query the current VSWR limit before setting the VSWR limit.
The parameter modification has no impact on the equipment.
When you set the alarm limit of the NEMU, do not need to enter the value, because the recovered limit is automatically set by the system.
The service is re-established only when the loop is cancelled.
The service is affected when the [PARA]LM[/PARA] is set to REMOTE or LOCAL.
The service is affected until the configuration is correct.
This parameter must be consistent with [PARA]LNCODE[/PARA] of the peer E1/T1 interface.
The service is affected until the configuration is correct.
This parameter must be consistent with [PARA]LNCODE[/PARA] of the peer E1/T1 interface.
The service is re-established only when the loop is cancelled.
The parameter modification has no impact on the equipment.
Not involved
The service is re-established only when the loop is cancelled.
The service based on the [PARA]PEERIP[/PARA] will be interrputed.
The service is affected until the configuration is correct.
The scrambling mode that has been set must be consistent with the E1 supported. If [PARA]LNCODE[/PARA] of the E1 supported is set to AMI, you must use the scrambling mode.
The service is affected until the configuration is correct.
This parameter must be consistent with that of the peer ethernet interface.
The parameter modification has no impact on the equipment.
The service is affected until the configuration is correct.
The user data carried on this port will be interrupted.
The service is affected until the configuration is correct.
The data stream on the user plane can be classified as different service classes among the user data types according to the DSCP values, and the classification corresponds to different VLAN settings.
The service is affected until the configuration is correct.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
The service is affected until the configuration is correct.
This parameter must be consistent with that of the peer Ethernet interface.
The service is affected until the configuration is correct.
This parameter must be consistent with that of the peer Ethernet interface.
The service is affected until the configuration is correct.
This parameter must be consistent with that of the peer Ethernet interface.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The value is valid only when the LSDF is set to ENABLE.
Not involved
Not involved
Not involved
Not involved
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
The parameter modification has no impact on the equipment.
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Over Temperature Threshold must be larger than that of the Low Temperature Threshold.The two temperature thresholds correspond to the following two temperature alarms respectively:Over Temperature Threshold: the over temperature alarm is reported when the actual temperature exceeds the Over Temperature Threshold.Low Temperature Threshold: the low temperature alarm is reported when the actual temperature is lower than the Low Temperature Threshold.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.It is recommended that you obtain the current threshold values by running the LST TATH command before setting the threshold to avoid configuration mistakes.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
If the SASU works in bypass mode, it does not support tower-mounted amplification
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in free-run mode.The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source.Ensure that the clock source is available before running the command.If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully.The command cannot be run when the clock quality test is being performed.If the system responds with a "Clock source is unavailable" message after you run the command, do as follows:For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command.For the GPS card clock source, check whether the GPS is configured through the DSP GPS command. If the system responds with no information, you can infer that the NodeB does not support the GPS. If the system responds with some information, you can infer that the GPS is faulty. Handle the fault first.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
This parameter cannot be modified when the logical cell exists; The maximum transmit power of the local cell must stay within the value range supported by the power amplifier; otherwise, the local cell is unavailable.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
A string of up to 31 characters can be entered. The string cannot be all blanks, or contain characters such as '<', '>', '!', '?', '^', two or more spaces, or two or more percentage symbols (%). It is recommended you name the NodeB after the place.
Not involved The output ports only exist on the NEMU.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Adjusting the downtilt of the RET antenna may affect the antenna coverage.Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command.The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt.It takes up to three minutes to set the tilt of an RET antenna.For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.
A string of up to 31 characters can be entered. The string cannot be all blanks or all '\'s, or contain the characters such as ">", "<", "!", "?", ";", """, "'", or ", ".
A string of up to 31 characters can be entered. The string cannot be all blanks or all '\'s, or contain the characters such as ">", "<", "!", "?", ";", """, "'", or ", ".
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved The output ports only exist on the NEMU.
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Over Temperature Threshold must be larger than that of the Low Temperature Threshold.The two temperature thresholds correspond to the following two temperature alarms respectively:Over Temperature Threshold: the over temperature alarm is reported when the actual temperature exceeds the Over Temperature Threshold.Low Temperature Threshold: the low temperature alarm is reported when the actual temperature is lower than the Low Temperature Threshold.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.It is recommended that you obtain the current threshold values by running the LST TATH command before setting the threshold to avoid configuration mistakes.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved The output ports only exist on the NEMU.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
Use this command to add a destination port which is a FTP server port providing FTP services. The port is corresponding to a FTP server ip address. The max number of list is twenty.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
The parameter modification has no impact on the equipment.
If the position of the RRU is TRUNK, you can infer that the position of the RRU is in the main chain or ring. If the position of the RRU is BRANCH, you can infer that the position of the RRU is in a parent RRU. All parent RRUs refer to the RHUB.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
If the ALD system type is Custom, the value can be set to R0A, R0B, and RET_PORT. If the ALD system type is RET_ONLY_MULTICORE, the value can be only set to RET_PORT. In other cases, the value can be set to R0A and R0B.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
An auxiliary power system can supply power to multiple RRUs. One RRU controls this auxiliary power system.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
The parameter modification has no impact on the equipment.
TMA24DB_ONLY_NON_AISG Only 24 dB TMA (NON_AISG) 40 60 310 280 RET_ONLY_COAXIAL Only RET (COAXIAL) 25 33 150 120 RET_ONLY_MULTICORE Only RET (MULTICORE) 0 1 150 120 TMA12DB_AISG 12 dB TMA and RET or Only 12 dB TMA (AISG) 30 40 450 400 TMA24DB_AISG 24 dB TMA and RET or Only 24 dB TMA (AISG) 40 60 850 750
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
The modified parameters take effect immediately; When the NodeB works in four-way antenna mode, it does not support the cell radius larger than 30 km; When the logical cell exits, you cannot make dynamic modification to the cell radius when the cell radius changes between equal to or smaller than 30 km and larger than 30 km.
The remote cell group to be modified must exist; It contains a string of up to 31 bytes.The string should not be totally blanks or contain the following characters: ' < ', ' > ', ' ! ', '?', ' ' ', ' " '. In addition it will be ignored if the end of the string is "\".
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
A string of up to 31 characters can be entered. The string cannot be all blanks or contain the following characters such as ">", "<", "!", "?", ";", """, "'", ", ", or "\".
The parameter modification has no impact on the equipment.
To specify the RRUs for a local cell in the distributed sector, you may repeatedly execute the command; when you remove the ending RRU from the cell, the command fails to be executed.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
The parameter modification has no impact on the equipment.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
This parameter can be successfully modified only when the logical cells are not set up. After this parameter is modified, all cells in the NodeB are set up again according to the new resource allocation mode.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The type of the sub-board can be modified only if the sub-board is removed.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Use this command to add a destination port which is a FTP server port providing FTP services. The port is corresponding to a FTP server ip address. The max number of list is twenty.
After you set an alarm to be shielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. Then, when the alarm is cleared manually, the NodeB generates the alarm clearance report. If the alarm does not exist at that time, the NodeB does not generate the alarm occurrence report or clearance report.When you set an alarm to be unshielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. If the alarm does not exist at that time, the NodeB does not generate any report.After you set an alarm to be unshielded, the NodeB handles the alarm in a normal way. If the alarm is generated, the NodeB generates the alarm occurrence report. If the alarm is cleared, the NodeB generates the alarm clearance report.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involvedThe parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.
Not involved
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.
Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.
Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.
The parameter modification has no impact on the equipment.
This parameter cannot be modified when the logical cell exists.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
When the encryption mode for transmission is set to AUTO, the FTP client tries to transmit data in encryption mode first. If the transmission fails, the FTP client transmits data in plain text mode.If the FTP client is set to support firewalls, the FTP client sends the CCC command to switch the data transmitted in the control command channel to plain text.After this command is run successfully, the settings take effect in the next FTP operation.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved None
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved This parameter cannot be modified.
Not involvedThe parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter can not be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Adjusting the downtilt of the RET antenna may affect the antenna coverage.Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command.The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt.It takes up to nine minutes to set the tilt of an RET antenna.For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.
The site to be modified must exist; It contains a string of up to 31 bytes.The string should not be totally blanks or contain the following characters: ' < ', ' > ', ' ! ', '?', ' ' ', ' " '. In addition it will be ignored if the end of the string is "\".
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.
Not involved
Not involved
Not involved
Adjusting the downtilt of the RET antenna may affect the antenna coverage.Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command.The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt.It takes up to 11 minutes to set the tilt of an RET antenna.For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involvedThere must be a gap of no less than 3°C between the upper limit and the lower limit of the temperature
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
For details on the value range, refer to <a href="BTS3836-CABINET.htm">Subrack Information Table</a>.
The service is affected until the configuration is correct
The parameter modification has no impact on the equipment.
There must be a gap of no less than 3°C between the upper limit and the lower limit of the temperature
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
You can run this command only if the specified RRU works properly.Normally, the RRU TX unit is set to ON. If you set the RRU TX unit to OFF, the cell in this RRU cannot work properly.After you run this command to set the RRU TX unit to ON in case that the RRU TX unit is OFF, the TX transmission channel of the RRU is unavailable until the logical cell is set up and the carrier frequency is configured for the RRU.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
Ensure that the transmission resource group to be modified does exist, and the bandwidth of the transmission resource groups after modification should not be greater than the bandwidth of the physical port carrying them. If the bearing type of the transmission resource group is ATM, the bandwidth of the transmission resource groups after modification should satisfy the bandwidth check. The method to check the bandwidth is as follows:1. Suppose the bandwidth of the Bearing Type physical port is A if the AAL2 path does not join in the configured transmission resource group, then SUM (bandwidth occupied by all SAAL links carried on this physical link (using SCR for calculation in case of VBR)) + MAX (bandwidth occupied by all AA2PATH carried on this physical link (using PCR for calculation))+ bandwidth occupied by OM channel carried on this physical link (using SCR for calculation in case of VBR) <= A.2. Suppose the bandwidth of transmission resource group is A if the AAL2 path joins in the configured transmission resource group, then SUM (bandwidth occupied by all SAAL links carried on this physical link (using SCR for calculation in case of VBR)) + SUM (bandwidth occupied by all CESs carried on this physical link) + MAX (bandwidth occupied by all AA2PATH carried on this physical link (using PCR for calculation))+ bandwidth occupied by OM channel carried on this physical link (using SCR for calculation in case of VBR) <= A.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
When you set the alarm limit of the NEMU, do not need to enter the value, because the recovered limit is automatically set by the system.
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Not involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
This parameter cannot be modified when the logical cell exists; The downlink and uplink frequencies of the local cell must stay within the same frequency band; If the power amplify unit can only support two carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 5MHz(25*0.2MHz) ; If the power amplify unit can support four carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 15MHz(75*0.2MHz).
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved This parameter cannot be modified.
The parameter modification has no impact on the equipment.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved
No involved
No involved
No involved
No involved None
No involved
No involved
No involved
If two clock links of the PTP protocol are configured, the two clock links must be in the same slot with the same client address and domain value.
This parameter is affective when link type is 1588 clock link.
Before the secondary homing NCP/CCP is added, the corresponding primary homing NCP/CCP must exist.
The maintenance domain name must be unique in one equipment.
The maintenance domain name must be unique in one equipment.
The maintenance association name must be unique in one maintenance domain.
VLAN must be mapped with the maintenance association.
No involved Only in VLAN
No involved Only in VLAN
No involved A string of 12 characters is required
No involved
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved None
Not involved None
Not involved None
Not involved .
Not involved None
Not involved None
Not involved None
Not involved None
Not involved None
One RMEP can be assigned with up to four IP addresses. The assigned IP address cannot be in conflict with the local IP address.
Not involved None
Not involved None
Not involved None
Not involved None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
Not involved
Not involved
None None
None None
None None
None None
None None
None This parameter cannot be modified.
None This parameter cannot be modified.
No involved None
No involved None
No involved None
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved None
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
No involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
No involved Only in VLAN
Not involved This parameter cannot be modified.
Not involved This parameter cannot be modified.
Not involved None
Not involved None
Not involved None
Not involved None
Not involved None
Not involved None
None This parameter cannot be modified.
Not involved None
Validation of Modification Impact on Radio Network Performance
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
It will affect the transffers-rate.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
NoneThe parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The board should be reset to make the modified parameter valid.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
It will affect the transffers-rate.
None
It will affect the transffers-rate.
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
NoneThe parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.
The parameter modification has no impact on the equipment.