8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
1/50
BSC6900
V900R012C01SPH513
Upgrade Guide
Issue 01
Date 2011-03-28
HUAWEI TECHNOLOGIES CO., LTD.
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
2/50
Copyright Huaei Te!h"o#ogies Co., Ltd. $%&&. A## rights reser'ed.
No part of this docum!t ma" # rproducd or tra!smittd i! a!" form or #" a!" ma!s $ithout prior $ritt!
co!s!t of Hua$i %ch!o&o'is Co() *td(
Trade(ar)s a"d *er(issio"s
a!d othr Hua$i tradmar+s ar tradmar+s of Hua$i %ch!o&o'is Co() *td(
,&& othr tradmar+s a!d trad !ams m!tio!d i! this docum!t ar th proprt" of thir rspcti ho&drs(
Noti!e
%h purchasd products) srics) a!d faturs ar stipu&atd #" th commrcia& co!tract mad #t$! Hua$i a!d
th customr( ,&& or partia& products) srics) a!d faturs dscri#d i! this docum!t ma" !ot # $ithi! th
purchasd scop or th usa' scop( .!&ss othr$is a'rd #" th co!tract) a&& statm!ts) i!formatio!) a!d
rcomm!datio!s i! this docum!t ar proidd /,S S/ $ithout $arra!tis) 'uara!ts or rprs!tatio!s of a!"
+i!d) ithr prss or imp&id(
%h i!formatio! i! this docum!t is su#ct to cha!' $ithout !otic( r" ffort has #! mad i! th prparatio!
of this docum!t to !sur accurac" of th co!t!ts) #ut a&& statm!ts) i!formatio!) a!d rcomm!datio!s i! this
docum!t do !ot co!stitut th $arra!t" of a!" +i!d) prss or imp&id(
Hua$i %ch!o&o'is Co() *td(
,ddrss4 Hua$i !dustria& Bas
Ba!tia!) *o!''a!'
Sh!h! 518129
Pop&s Rpu#&ic of Chi!a
7#sit4 http4$$$(hua$i(com
mai&4 supporthua$i(com
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
iii
http://www.huawei.com/mailto:[email protected]://www.huawei.com/mailto:[email protected]8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
3/50
%&C'00 00*012C01&PH+13
,pgrade uide ./out his o!uent
A+out This Do!u(e"t
Author
*repared +y u iang Date 2010-11-22
Appro'ed +y 4u uedong# $i uangfeng# 5u6in7un# 5ei $ei# hang 9a/in#6iang iu:ia
Date 2010-12-2+
Tested +y 6in ;inersion#!opared with the earlier >ersions"
2,pgrade Pro!ess es!ri/es the pro!ess of upgrading the earlier >ersionto this >ersion"
3Preparations for ,pgrade es!ri/es the preparations that need to /e ade/efore the upgrade"
?,pgrade @perations es!ri/es the pro!edures of upgrade operations"
+Post-,pgrade erifi!ation es!ri/es how to >erify the upgrade"
'ersion *oll/a!7 es!ri/es the pro!ess of >ersion roll/a!7 in the !aseof upgrade failure"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
>
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
4/50
%&C'00 00*012C01&PH+13
,pgrade uide Contents
Co"te"ts
1 Reading Before Upgrade..............................................................................................1-1
1"1 Choosing an ,pgrade uide""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""1-1
1"2 ersion *e=uireents for ,pgrade""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""1-1
1"3 Ipa!ts of the ,pgrade on the A:isting &yste"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""1-2
1"? Botes and Cautions for ,pgrade""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""1-2
1"+ ers""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" 1-'
2 Upgrade Process...........................................................................................................2-1
3 Preparations for Upgrade.............................................................................................3-1
3"1 Installing the ;2000 .daptation $ayer"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""3-?
3"2 Perforing the BA Health Che!7"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""3-?
3"2"1 Creating a as7 for Che!7ing the BA Health"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""3-?
3"2"2 Che!7ing the *eports""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""3-+
3"3 &tarting the BA ransfer ool"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""3-'3"? Preparing 4iles for the ,pgrade"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""3-'
4 Upgrade Operations......................................................................................................4-1
?"1 &tarting the ,pgrade Client""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""?-1
?"1"1 &tarting the ,pgrade Client hrough the ;2000"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""?-2
?"1"2 &tarting the ,pgrade Client hrough the Client"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""?-?
?"2 Configuring the %asi! Inforation ./out the ,pgrade"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" ?-+
?"3 Perforing Pre-,pgrade""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""?-
?"? Perforing ,pgrade"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""?-10
5 Post-Upgrade Verification.............................................................................................5-1
+"1 Post-,pgrade BA Health Che!7"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-1
+"1"1 Perforing the Post-,grade BA Health Che!7""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-1
+"1"2 Coparing the *eport of the Post-,pgrade Health Che!7 with hat of the Pre-,pgrade
Health Che!7"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" +-1
+"2 Post-,pgrade &er>i!e erifi!ation""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-2
+"2"1 erifying &er>i!es ;anually"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-2
+"2"2 erifying &er>i!es hrough the ;2000""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-2
6 Version Rollbac............................................................................................................6-1
'"1 Pro!ess of ersion *oll/a!7"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-1
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
>ii
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
5/50
Contents
%&C'00 00*012C01&PH+13
,pgrade uide
'"2 Preparing ata 4or ata *elo!ation %efore the *oll/a!7""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-1
'"3 *oll/a!7 @perations""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" '-2
'"? Post-*oll/a!7 Pro!essing""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-+
'"?"1 ata *oll/a!7 on the ;2000 and &er>i!e erifi!ation""""""""""""""""""""""""""""""""""""""""""""""""""""""""" '-+
'"?"2 5hat to o If %oards 4ail to %e $oaded .fter the %&C'00 Is *olled %a!7 to the %&C'000
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" '-+
! "ppendi#.........................................................................................................................!-1
D"1 ,pgrade *e!ords""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" D-1
D"2 %a!7up 4iles In>ol>ed in the ,pgrade""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""D-1
D"3 Ites of the .utoati! Che!7"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""D-2
D"? $ist of %&C'00 @;, Ports that .re Bot Ana/led on the %&C'000 or %&C'810 @;,""""""""""""""D-3
>iii
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
6/50
1 Reading Before Upgrade1.1 Choosi"g a" Upgrade Guide
his do!uent# a guide for 00*012C01&PH+13 >ersion upgrade# applies to all theupgrades to the 00*012C01&PH+13"
1.2 ersio" -euire(e"ts /or Upgrade
$able 1.1 ersion re=uireents for upgrade
ersio" 0e/ore the Upgrade Des!riptio"
00*012C01&PC+00 and its pat!h>ersions
hey !an /e upgraded to the00*012C01&PH+13 dire!tly"
00*012C01&PC200 and its pat!h>ersions
00*011C00&PCD00 and its pat!h>ersions
%&C'810200*011C00&PC100 andits pat!h >ersions
%&C'00000*008C01%0+1 and itspat!h >ersions
%&C'00000*008C12%1+ and itspat!h >ersions
%&C'00000*008C1+&PC100 andits pat!h >ersions
%ote&
he upgrade fro the %&C'00000*008C1+&PC100 to the%&C'00 00*012C01&PH+13 issupported on only !ertain sites" Ifother sites re=uire the upgrade#!onta!t Huawei te!hni!al support"
hey !an /e upgraded to the00*012C01&PH+13 dire!tly throughthe /aseline installation pa!7age00*012C01&PC+00"
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
7/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
ersio" 0e/ore the Upgrade Des!riptio"
%&C'810200*010C01%0'1 and itspat!h >ersions
hey !an /e upgraded to the00*012C01&PH+13 dire!tly throughthe interediate >ersion%&C'810200*011C00&PC100 and the/aseline installation pa!7age00*012C01&PC+00"
If no upgrade rule is defined for the upgrade fro an earlier >ersion to the target >ersion# thena A*&I@B is re=uired for the upgrade" he >ersion /efore the upgrade is upgraded to theA*&I@B# and then to the target >ersion" his A*&I@B is naed an Einterediate >ersion"E
1.3 I(pa!ts o/ the Upgrade o" the E1isti"g Syste(
'(pacts on )er*ices
In the !ase of upgrade fro %&C'810 to 00*012C01&PH+13 >ersion#ser>i!es are disrupted for less than se>en inutes"
In the !ase of upgrade fro %&C'000 to 00*012C01&PH+13 >ersion#
ser>i!es are disrupted for less than 1' inutes"
In the !ase of upgrade fro 00*011C00&PCD00 and its pat!h >ersions#00*012C01&PC200 and its pat!h >ersions# or 00*012C01&PC+00 to00*012C01&PH+13 >ersion# ser>i!es are disrupted for two to se>en inutes"
'(pacts on %et+or ,o((nications
Bone"
1.4 %otes and ,ations for Upgrade . large nu/er of perforan!e !ounters in the 00*012C01&PH+13differ fro
those in the %&C'810 200*010# %&C'810 200*011# or 00*011C00 ,@".s a result# after the %&C'810 200*010# %&C'810 200*011# or
00*011C00 ,@ is upgraded to the 00*012C01&PH+13# soe perforan!e!ounters on the ;2000 !lient or Perforan!e *eport &yste (P*&) /e!oeunrelia/le" 9ou ust sol>e any possi/le pro/les !aused /y the !hanges in theperforan!e !ounters one wee7 /efore /eginning to upgrade an BA" 4orinstru!tions# see se!tion ?"2 E,nsol>ed Pro/lesE in the BSC690000*012C01&PH+13Release Notes"
he apping /etween the o&-differentiated paraeters in>ol>ed in an ;;$
!oand is optiiFed in the 00*012C01 and its pat!h >ersions"hat is# theparaeter that deterines &!heduling Priority Inde: (&PI) !hanges fro HP toHP Class and the upgrade rule of the ;;$ !oand !annot /e inherited orrepla!ed !onditionally in the !ase of upgrade fro %&C'810 200*010#%&C'810 200*011# or 00*011C00 (e:!ept for &; ode) to
00*012C01&PH+13" herefore# !hange the o&-differentiated paraeters
2
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
8/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
anually /y running an ;;$ !oand after the upgrade is !oplete" 4ordetails# see Ehe apping /etween the o&-differentiated paraeters in>ol>edin the ;;$ !oand is optiiFed"E in the BSC6900 V900R012C01SPH513Release Notes"
he pre-upgrade ust /e perfored at least three days /efore the upgradee:e!ution /y referring to3GPreparations for ,pgrade# and any fault that surfa!esin the pre-upgrade !he!7 report ust /e re!tified /efore the upgrade e:e!ution"
he upgrade tool does not support data upgrade now" If the %&C'000 inthe li>e networ7 is ena/led with # log in to ttp&//spport.a+ei.co(/and!hoose )oft+are ,enter 0 Version )oft+are 0 ireless Prodct ine 0)ingleR"% 0 )R"% O toolsto o/tain the upgrade tool and thenhandle with data using the upgrade tool /y referring to the!orresponding operation guide"
If the %&C'000 is !onne!ted to a %& /y using a transission inter!onne!tion
de>i!e su!h as tieslot !opression de>i!e or transission de>i!e in theli>e networ7# upgrade the %& tieslot data at the %&C'000 /y using the
upgrade assistan!e tool to ensure that the %& tieslot data reainsun!hanged after the upgrade is !oplete"
5hen upgrading the %&C'000 to the target >ersion with the trans!oder su/ra!7(C&) !onfigured reotely# !he!7 that the !onfiguration of .ter signaling lin7sfollows the following prin!iples
: Aa!h C& is !onfigured with at least four .ter signaling lin7s"
: A>ery +12 !ir!uit identifi!ation !odes (CICs) are !onfigured with two '? 7/itJs.ter signaling lin7s"
If the e:isting !onfiguration of .ter signaling lin7s does not !oply with theprin!iples# add .ter signaling lin7s /ased on the prin!iples"
If the nu/er of .ter signaling lin7s !al!ulated on the /asis of the se!ond prin!iple is less thanthe nu/er of .ter signaling lin7s !al!ulated on the /asis of the first prin!iple# !onfigure .tersignaling lin7s /ased on the first prin!iple"
In the !ase of an upgrade fro the %&C'810200*010C01%0'1 or its pat!h
>ersions to !urrent >ersion# please handle with the following pro/le a!!ordingto !orresponding a>oidan!e easures des!ri/ed ina/le 1"1"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
3
http://support.huawei.com/http://support.huawei.com/8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
9/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
$able 1.1 Ite list of pro/le and !orresponding a>oidan!e easures /efore upgrade
ProblemDescription
Avoidance Measures
5hen !opared withearlier >ersions# theapping /etween PH%and &CP was updatedfro the%&C'810200*011>ersion" Che!7 theapping /etween thePH% and &CP /eforeperforing the upgrade(the apping /etweenthe PH% and &CP>alue in all *;;.Pta/les ust !orrespondon a one-to-one /asis)"
1" %efore upgrading the %&C'810 200*010C01%0'1 orits pat!h >ersions to !urrent >ersion# run the ;;$!oand )$ 'PP"$to !he!7 whether the IP paths ofHK@&P.H or $K@&P.H e:ist" If they e:ist#!he!7 the apping /etween the PH% and the &CP>alue" If they do not e:ist# s7ip the following steps"
2" %efore the upgrade# ensure that the apping /etweenthe PH% and the &CP is uni=ue" *un the )$$R"P !oand to !he!7 whether the transportresour!e apping is set"
If the transport resour!e apping is not set# s7ip thefollowing steps"
If the transport resour!e apping is set# run the )$$R"P and )$ 78"U$$R"P !oandsseparately to !he!7 *; apping (*;;.P) or default*; apping (A4.,$*;;.P) /etween the PH%and the &CP" he PH% (>alue range %A# .411-.4?3#A4) and &CP (>alue range 0-'3) should !orresponddire!tly and /e !orre!tly apped"
If the &CP >alue !orresponding to soe PH%s in soe*;;.P ta/les is in!onsistent with >alues!orresponding to the PH%s in other *;;.P ta/les# runthe ;;$ !oand O $R"Pto !hange the &CP>alue a!!ording to the least odifi!ation prin!iple" heleast odifi!ation prin!iple indi!ates that the data should/e odified as little as possi/le to eet the re=uireentfor the upgrade" 4or e:aple# if the &CP >alue!orresponding to A4 in ost *;;.P ta/les is ?' /utthat in soe *;;.P ta/les is ?D# !hange the &CP>alue fro ?D to ?'"
If the &CP >alue !orresponding to soe PH%s in soeA4.,$*;;.P ta/les is in!onsistent with that!orresponding to PH%s in other A4.,$*;;.Pta/les# run the ;;$ !oand )7$ 78"U$$R"Por O $R"P to !hange the &CP >alue
a!!ordingly" 4or e:aple# assue that /esides theA4.,$*;;;.P# two additional *;;.Ps are!onfigured *;;.P1 and *;;.P2" In *;;.P1#the &CP >alue !orresponding to A4 is ?'# whi!h is thesae as the &CP >alue !orresponding to A4 in theA4.,$*;;;.P" he &CP >alue !orresponding toA4 in *;;.P2# howe>er# is ?D" In this situation# !hangethe &CP >alue !orresponding to A4 in *;;.P2 to ?'"
?
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
10/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
ProblemDescription
Avoidance Measures
5hen !opared withearlier >ersions# theapping /etween IPpath and &CP wasupdated fro the%&C'810200*011>ersion" Che!7 theapping /etween the IPPath and &CP /eforeperforing the upgrade(ensure that the &CP>alues of IP paths of thesae type are thesae)"
1" %efore the upgrade# ensure that the IP path and the&CP !orrespond dire!tly and are !orre!tly apped" *unthe ;;$ !oand )$ 'PP"$ to !he!7 the apping/etween the IP path and &CP" If the &CP >alue!orresponding to soe IP paths is in!onsistent with the&CP >alues !orresponding to other IP paths of thesae type# run the ;;$ !oand O 'PP"$ to!hange the &CP >alue a!!ording to the leastodifi!ation prin!iple"
2" If the &CP >alue !orresponding to the IP path o>erthe Iu/ interfa!e at the *BC is !hanged# run the ;;$!oandsRV 'PP"$and " 'PP"$ to a7e the!orresponding !hange on Bode%"
4or e:aple# there are three IP paths of the type#IPP.H 1# IPP.H 2# and IPP.H 3" he &CP >alue ofIPP.H 1 and IPP.H 2 is ?'# /ut the &CP >alue ofIPP.H 3 is ?D" Change the &CP >alue fro ?D to ?' inIPP.H 3# and run the ;;$ !oands RV 'PP"$and " 'PP"$to a7e the !orresponding !hange onBode%"
5hen !opared withearlier >ersions# the/andwidth of ..$2 pathand P was updatedfro the
%&C'810200*011>ersion" Che!7 that the/andwidth of ..$2paths is wider than the/andwidth of the P that/ears the ..$2 path/efore perforing theupgrade"
1" *un the ;;$ !oand )$ ""2P"$ to !he!7whether there are ..$2 paths in P /earer ode" If thereare .$$2 paths in P /earer ode# go to the ne:t step"
2" 4or the ..$2 path# !he!7 whether the ser>i!e type of
the transission traffi! inde: and re!eption traffi! inde: isC%*J* %*JB* %*" If yes# go to the ne:t step"
3" Copare the pea7 rate of the C%*J* %*JB* %*traffi! inde: with the pea7 rate of the P /andwidth" If thepea7 rate of the traffi! inde: of the ..$2 path is greaterthan the P /andwidth# go to the ne:t step" If the pea7rate of the traffi! inde: of the ..$2 path is not greaterthan the P /andwidth# s7ip the following steps"
?" *un the ;;$ !oand " "$$R8 to add a newtraffi! inde:" he ser>i!e type of the new traffi! inde:should /e the sae as that of the transission traffi!inde: and re!eption traffi! inde: of the ..$2 path" he
pea7 rate of the traffi! inde: after !on>ersion is e=ual tothe P /andwidth"
+" *un the ;;$ !oandO ""2P"$ to !hangethe transission traffi! inde: and re!eption traffi! inde: ofthe ..$2 path to the new traffi! inde:" his ensures thatthe transission traffi! inde: and re!eption traffi! inde:are not greater than the /andwidth of the P that /earsthe ..$2 path"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
+
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
11/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
ProblemDescription
Avoidance Measures
uring the *BCupgrade pro!ess# the;2000 autoati!allydeletes the A;& IPaddress# and fails to addit" herefore# the A;&IP address ay /e lostafter the upgrade# andthe Bode% ay fail to/e aintained on the;2000 !lient"
o a>oid the possi/le loss of the A;& IP address# do asfollows
1" %efore the upgrade# log in to the *BC through the$;" *un the ;;$ !oand )$ 7)'P# and re!ordthe displayed A;& IP address"
2" .fter the upgrade is !opleted# log in to the *BCthrough the $;" *un the ;;$ !oand )$ 7)'Pto=uery whether the A;& IP address e:ists" If the A;& IPaddress does not e:ist# run the ;;$ !oand "7)'Pto add the re!orded A;& IP address anually" Ifthe A;& IP address e:ists# then there is no need to addit"
1.5 Ter(s
a/le 1"1 lists the !oon ters used in this guide"
$able 1.1 Coon ters
Ter( Des!riptio" E1a(p#e
Bew ersion Bu/er of the >ersion after theupgrade
00*012C01&PH+13
@;,K. .!ti>e @;, /efore the upgrade -
@;,K% &tand/y @;, /efore theupgrade
-
@;,K*ootPath Installation path of the @;, If the upgrade fro the%&C'00000*008 to the00*012C01&PH+13 has/een perfored# the@;,K*ootPath is/B),6999/data/(bsc"
@therwise# if the @;,
operating syste is 5indows#the @;,K*ootPath is&:(bscL if the @;,operating syste is $inu:# the@;,K*ootPath is/(bsc
A:ternal >irtualIP address
he e:ternal >irtual IP address#whi!h is set when the @;,appli!ations are installed# isused for the !ouni!ation/etween the @;, and the $;or ;2000# and is in!luded in thee:ternal Athernet adapter tea
of the a!ti>e @;,"
-
'
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
12/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
Ter( Des!riptio" E1a(p#e
Installationpa!7age
. installation pa!7age is thesoftware pa!7agede!opressed fro theV;99R912,91)P,599 V7R.raror V;99R912,91)P513V7R.rarfile that is o/tained frohttpJJsupport"huawei"!oJ"
00*012C01&PC+00 or 00*012C01&PH+13
arget ersioninstallationpa!7age
00*012C01&PH+13 is thetarget >ersion# then the00*012C01&PH+13installation pa!7age is alsonaed target >ersion installationpa!7age"
00*012C01&PH+13
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
D
http://support.huawei.com/http://support.huawei.com/http://support.huawei.com/8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
13/50
2 Upgrade Process4igure 1"1shows the upgrade pro!ess"
8igre 1.1 ,pgrade pro!ess
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
14/50
3 Preparations for Upgradehis !hapter des!ri/es the preparations to /e ade for the upgrade" Prepareproperly in ad>an!e to ensure that the upgrade is !opleted on tie"
a/le 1"1 lists the ites that need to /e !he!7ed /efore the upgrade"
he dire!tory and the data files under the dire!tory /efore the upgrade will not /e deleted inthe upgrade pro!ess" 9ou need not /a!7 up the data anually"
$able 1.1 Che!7list /efore upgrade
No. Ite( Des!riptio"
1 Che!7 that all the%&C'00 @;,ports that are notena/led on the%&C'000 or %&C'810 @;, areena/led"
In the !ase of upgrade fro the %&C'000 or%&C'810 to the 00*012C01&PH+13# the @;,ports that are added on the %&C'00 !oparedwith %&C'000 or %&C'810 need to /e opened"Ansure that the !ustoer !he!7s if the @;, portsare shielded with a firewall" If not# s7ip this step" Ifyes# as7 the operator to !he!7 that the firewall hasnot /lo!7ed the @;, ports" 4or details a/out the@;, ports that are added on the %&C'00!opared with %&C'000 or %&C'810# see se!tionD"?E$ist of %&C'00 @;, Ports that .re BotAna/led on the %&C'000 or %&C'810 @;,"E
In the !ase of upgrade fro the00*011C00&PCD00 or its pat!h >ersions to the00*012C01&PH+13# the @;, ports
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
15/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
No. Ite( Des!riptio"
2 Confir that thefirewall has not/lo!7ed the e:ternalfi:ed IP addressesof the a!ti>e andstand/y @;,s"
Bote If the >ersion/efore the upgradeis %&C'000# s7ipthe ite"
1" If the >ersion /efore the upgrade is %&C'810# runthe )P B" !oand to =uery the e:ternalfi:ed IP addresses" If the >ersion /efore theupgrade is %&C'00# run the )P OU!oand to =uery the e:ternal fi:ed IPaddresses"
2" If the e:ternal fi:ed IP addresses do not e:ist#s7ip this ite"
3" If the e:ternal fi:ed IP addresses e:ist# !he!7 ifthere is a firewall in the networ7 /etween theupgrade !lient and the @;," If not# s7ip this step"If yes# as7 the operator to !he!7 that the firewallhas not /lo!7ed the e:ternal fi:ed IP addresses ofthe a!ti>e and stand/y @;,s"
3 ;a7e ready these!urity pat!hesM%??338 andM%'0D1? of ;i!rosoft 5indowsP Professional&P02 or ;i!rosoft5indows 2003"
Che!7 if the se!urity pat!hes M%??338 andM%'0D1? of ;i!rosoft 5indows P Professional&P02 or ;i!rosoft 5indows 2003 are installed /eforeyou log in to the 5e/ $; through an IA /rowser onthe operating syste" If yes# s7ip this step" If not# >isitthe we/site httpJJwww"i!rosoft"!oJdownloads todownload se!urity pat!hes M%??338 and M%'0D1?"4or details# see the 4. EInstalling @& Pat!hesE inthe BSC6900 LMT User Guide"
? Che!7 the >ersionapping /etween
related produ!ts inthe e:isting networ7
Che!7 whether the >ersions of the related produ!ts inthe e:isting networ7 ap 00*012C01&PH+13" 4or
details on the >ersion apping /etween the relatedprodu!ts# see se!tion 1"3 E*elated Produ!t ersionsEin the BSC6900 V900R012C01SPH513 ReleaseNotes"
+ @/tain the newli!ense file
In the !ase of upgrade fro the %&C'000J%&C'810#or 00*011C00 to the 00*012C01&PH+13>ersions# applying for a new li!ense on a lo!al PC isre=uired" Ansure to apply for the li!ense file /y usingthe teplate that at!hes 00*012C01&PH+13and that the A&B is !onsistent with the BA to /eupgraded"
Cautio"
In the !ase of upgrade fro the %&C'000J%&C'810#
e:!eptional pro!ess for !oer!ial li!ense distri/ution is
re=uired (E&!enarioE is spe!ified as Ehe authoriFed wor7
notifi!ationE and E&u/s!enarioE is spe!ified as E,pgrade
>ersion to fi: the /ugE in the ele!troni! wor7flow for e:!eptional
li!ense distri/ution) to apply for e:!eptional li!ense distri/ution"
2
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
16/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
No. Ite( Des!riptio"
' Colle!t theinforation a/outthe site
1" @/tain the password for user adin and the >irtuale:ternal IP address rele>ant to ea!h networ7 eleent(BA) to /e upgraded"
2" @/tain the password for user root of the a!ti>e@;, operating syste of the BA to /e upgraded inthe !ase of an upgrade fro the %&C'000 to the00*012C01&PH+13"
D Install the ;2000adaptation layer
Install the ;2000 adaptation layer /y referring tose!tion
3"1EInstalling the ;2000 .daptation $ayerE"
8 Perfor the BAhealth !he!7 /eforethe upgrade
Perfor the health !he!7 on the networ7 /eforeupgrade /y referring to se!tion 3"2EPerforing the BAHealth Che!7E"
Bote
9ou do not need to perfor the BA health !he!7during the preparation for the pre-upgrade three days/efore the upgrade e:e!ution# /ut you ust perforthe BA health !he!7 during the preparation for thepre-upgrade the day when the upgrade e:e!ution isperfored"
&tart the BAtransfer tool
In the !ase of upgrade fro the %&C'000J%&C'810to the 00*012C01&PH+13# start the BA transfertool to upgrade the ;2000 data /y referring to se!tion3"3E&tarting the BA ransfer oolE"
Bote
4or the upgrade fro %&C'000 or %&C'810 to00*012C01&PH+13 9ou do not need to start theBA transfer tool during the preparation for the pre-upgrade three days /efore the upgrade e:e!ution# /utyou ust start the BA transfer tool during thepreparation for the pre-upgrade the day when theupgrade e:e!ution is perfored"
10 Prepare files for theupgrade
Prepare files for the upgrade /y referring to se!tion3"?EPreparing 4iles for the ,pgradeE"
11 Perfor the pre-upgrade
Perfor the pre-upgrade /efore the upgradee:e!ution to lo!ate and sol>e the pro/les thatsurfa!e during the pre-upgrade /y referring tose!tions ?"1E&tarting the ,pgrade ClientE#?"2EConfiguring the %asi! Inforation ./out the,pgradeE# and ?"3EPerforing Pre-,pgradeE"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
3
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
17/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
No. Ite( Des!riptio"
12 Che!7 whether the@;,a or @;,//oard dri>er needsto /e upgraded
If the upgrade !lient propts that the >ersion of the@;, dri>er is too early# log in tottp&//spport.a+ei.co(/ and !hoose )oft+are,enter N Version )oft+are N ireless Prodctine N )ingleR"% N )R"% O tools N OUri*er Upgrade V1.= to o/tain the @;, dri>erupgrade tool# and then upgrade the @;, dri>er /yreferring to the MU Suse Li!u" 9#3 $erati!%S&ste' (ri)er U$%rade Guide" @therwise the sta/ilityof operating syste will /e affe!ted"
3.1 'nstalling te 2999 "daptation a>er
Perfor the following steps to deterine whether the ;2000 adaptation layer needsto /e installed"
)tep 1 @n the ;2000 !lient# !hoose )oft+are 0 )oft+are Bro+ser" . window is displayed"@n the na>igation tree of the window# !li!7 the O, )er*erta/ and !hoose O, 0ediation" Che!7 whether there is an BA of the target >ersion" If yes# go to &tep 2"Ifnot# go to&tep 3"
)tep 2 Choose the BA of the target >ersion" In the right pane of the window# !he!7 whetherthere is a target >ersion nu/er in the %7 Version!olun" If yes# end this tas7" Ifnot# go to&tep 3"
)tep 3 *ead through the 5arning for ;ediation Installation Assentials that at!hes the
;2000 adaptation layer# !hoose the$eratio! Guide *or Mediatio! +!l& *or M2000Co''o! Versio! is V200R006 or Later,that at!hes the upgrade# and then installthe ;2000 adaptation layer"
----7nd
3.2 *er/or(i"g the NE Hea#th Che!)
he fun!tion of BA health !he!7 is supported when the !urrent >ersion is 00*011or later >ersions"
his se!tion des!ri/es how to perfor the health !he!7 on the BA /efore theupgrade when the traffi! is not /usy so that you !an deterine whether the BA !an/e upgraded /ased on the operating status of the BA and the networ7"
3.2.1 Creati"g a Tas) /or Che!)i"g the NE Hea#th
)tep 1 &tart the ;2000 !lient# and then !hoose aintenanceN %7 ealt ,ec"
)tep 2 @n the displayed ta/ page# !li!7 %e+ to !onfigure the inforation on the !he!7 tas7"
?
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
http://support.huawei.com/http://support.huawei.com/8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
18/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
1" &ele!t Upgrade ,ecfro the )cenariodrop-down list"
2" ;2000 autoati!ally o/tains one nae of the tas7 in the %a(ete:t /o:" heuser !an odify the nae"
3" In the displayed BA dialog /o:# sele!t the BA to /e !he!7ed fro the
Unselected %7sna>igation tree on the left# and then !li!7 to o>ethe BA to the )elected %7sna>igation tree on the right" .lternati>ely# you !an
!li!7 to o>e all the BAs fro the Unselected %7sna>igation tree onthe left to the )elected %7sna>igation tree on the right"
?" In the $i(e )ettingfrae# sele!t 'nstant"
)tep 3 Cli!7 %e#t"
*etain the default >alue of ealt ,ec Period"
)tep 4 Cli!7 8inisto finish !reating the tas7 of the BA health !he!7" 5hen the tas7 of
health !he!7 on the networ7 is finished# it will /e displayed under the 8inised $assnode in the na>igation tree on the left panel of the %7 ealt ,ecta/ page"
----7nd
3.2.2 Che!)i"g the -eports
o !he!7 the BA health reports# do as follows
)tep 1 ,nder the 8inised $assnode in the na>igation tree# sele!t a tas7# and then!hoose Vie+ Report fro the right-!li!7 short!ut enu under ain window" heealt ,ec Reportdialog /o: is displayed"
)tep 2 &ele!t the e:pe!ted report fro the report list# and then !li!7 Opento !he!7 whetherall the ites are noral"
I/... The"...
here are ites displayed in red# Che!7 if there is a fault" 9ou are ad>ised tohandle with the fault /y referring the reports/efore upgrade"
here are no ites displayed inred#
he running BA wor7s properly and you !anupgrade it iediately"
)tep 3 Cli!7 )a*e as@n the displayed )a*edialog /o:# sele!t a sa>e path for the report"he report on the health !he!7 is sa>ed as a "Fip file" 9ou !an dou/le-!li!7 the "Fipfile to /rowse the !opressed files# and then dou/le-!li!7 the report to open it"
he report on the health !he!7 !an /e sa>ed as an "htl file or "do! file"
In the !ase of the health !he!7 is sa>ed as "do! file# de!opress the Fip file first# and thenopen the "do! file" In the !ase of the health !he!7 is sa>ed as "htl file# !hoose inde:"htlfile"
----7nd
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
+
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
19/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
3.3 Starti"g the NE Tra"s/er Too#
In the !ase of upgrade fro the %&C'000J%&C'810 to the 00*012C01&PH+13#you should start the BA transfer tool /efore the upgrade" 4or details# see se!tion 2"1
of the BSC6900 V900R012C01 (ata Relo-atio! Guide+!l& *or M2000 Co''o!Versio! is V200R010,#
3.4 *repari"g 2i#es /or the Upgrade
)tep 1 eterine the installation pa!7age for the upgrade a!!ording to the >ersion /eforethe upgrade listed in 1a/le 1"1"
$able 1.1 Installation pa!7age for different upgrade s!enarios
Version Before the Upgrade Required Installation Pacage
00*012C01&PC+00 and its pat!h>ersions
arget >ersion installation pa!7age00*012C01&PH+13
00*012C01&PC200 and its pat!h>ersions
00*011C00&PCD00 and its pat!h>ersions
%&C'810200*011C00&PC100 andits pat!h >ersions
%&C'00000*008C01%0+1 and itspat!h >ersions
%&C'00000*008C12%1+ and itspat!h >ersions
%&C'00000*008C1+&PC100 andits pat!h >ersions
arget >ersion installation pa!7age00*012C01&PH+13
%aseline installation pa!7age00*012C01&PC+00
%&C'810200*010C01%0'1 and itspat!h >ersions
arget >ersion installation pa!7age00*012C01&PH+13
%aseline installation pa!7age00*012C01&PC+00
Interediate >ersion installation pa!7age
%&C'810200*011C00&PC100he latest pat!h installation pa!7age of%&C'810200*011C00&PC100
)tep 2 ownload and prepare the installation pa!7age for the upgrade on the PC"
If the upgrade is perfored through the ;2000# the PC refers to the one where the ;2000!lient is running"
If the upgrade is perfored through the upgrade !lient# the PC refers to the one where theupgrade !lient is running"
In order to a7e sure the following upgrade !an /e pro!essed norally# the free spa!e ofthe PC should /e ore than 1 % /efore upgrade"
'
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
20/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
o o/tain the target >ersion installation pa!7age or /aseline installation pa!7age
1" $og in to httpJJsupport"huawei"!oJ"Choose )oft+are ,enterNVersion)oft+areN irelessProdct ineN )ingleR"%N B),N B),6;99too/tain the B),6;99 V;99R912,91)P,599 V7R.raror B),6;99
V;99R912,91)P513 V7R.rarfiles"2" e!opress the files to o/tain the installation pa!7age V;99R912,91)P,599
or V;99R912,91)P513" 4igure 2"1 shows the dire!tory stru!ture of theinstallation pa!7age V;99R912,91)P,599# and 4igure 2"2shows the dire!torystru!ture of the installation pa!7age V;99R912,91)P513"
8igre 2.1 ire!tory stru!ture of 00*012C01&PC+00 installation pa!7age
8igre 2.2 ire!tory stru!ture of 00*012C01&PH+13 installation pa!7age
o o/tain an interediate >ersion installation pa!7age# do as follows
1" Choose &oftware CenterN ersion &oftware N 5ireless Produ!t $ine N 5C;.*.B N 5C;. *BC N %&C'810 N H,.5AI %&C'810200*011C00&PC100to o/tain the %&C'810200*011C00&PC100 installation pa!7age" 4igure 1"1shows the dire!tory stru!ture of %&C'810200*011C00&PC100"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
D
http://support.huawei.com/http://support.huawei.com/http://support.huawei.com/8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
21/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
8igre 1.1 ire!tory stru!ture of %&C'810200*011C00&PC100
2" Choose )oft+are ,enter N Version )oft+are N ireless Prodct ine N," R"% N ," R%, N B),6ed in the saedire!tory"
3" Copy the ataan?8OR?7=P?.e#e andlibrar>.zip files to[V200R011C00SPC100C:pgradedire!tory as shown in 4igure 1"1 ando>erwrite the e:isting files" Copy theUP?RU7?V299R919,91B961?V299R911,99)P,199?,OO%.#(landUP?PR7"$",7,@?V299R919,91B961?V299R911,99)P,199?,OO%.sAl files to[V200R011C00SPC100C:pgraderle:co((ondire!tory asshown in4igure 1"1and o>erwrite the e:isting files"
----7nd
8
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
22/50
4 Upgrade Operationsa/le 1"1 lists the tas7s in>ol>ed in the upgrade pro!ess" %efore you perfor theupgrade operations# ensure that the preparation for the upgrade is !oplete"
$able 1.1 ,pgrade tas7s
Tas) Duratio" 3(i"4
&tarting the upgrade!lient
If the upgrade !lient is started through the ;2000# thistas7 ta7es less than ten inutes"
If the upgrade !lient is started through the !lient# thistas7 ta7es less than one inute"
Configuring /asi!inforation a/outupgrade
If the upgrade !lient is started through the ;2000# thistas7 ta7es less one inute"
If the upgrade !lient is started through the !lient# thistas7 ta7es less se>en inutes"
Perforing the pre-upgrade
20-80
Perforing the upgrade 20-'0
his guide ta7es the upgrade in dual-@;, ode as an e:aple" he upgrade in single-@;, ode is siilar to that in dual-@;, ode"
he duration of uploading the >ersion files >aries a!!ording to the /andwidth of sites"Astiate the duration a!!ording to the /andwidth of the sites"
4or detailed a>oidan!e easures of a/nority# see the upgrade !lient on-line 4."
4.1 )tarting te Upgrade ,lient
his do!uent pro>ides two upgrade ethods through the ;2000 and through theupgrade !lient" 9ou are ad>ised to perfor the upgrade operations through the
;2000" 9ou !an also perfor the upgrade operations through the upgrade !lient
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
23/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
when the ;2000 does not wor7 norally" he differen!es /etween the two ethodsare des!ri/ed as follows
,sing the ;2000 .dd the BA to /e upgraded and !onfigure the /asi!
inforation a/out the upgrade on the ;2000 !lient" hen# start the upgrade
!lient" ,sing the upgrade !lient &tart the upgrade !lient" hen# add the BA to /e
upgraded and !onfigure the /asi! inforation a/out the upgrade on the upgrade!lient"
4.1.1 Starti"g the Upgrade C#ie"t Through the 5$%%%
If upgrade fro the %&C'000 to the 00*012C01&PH+13# start the upgrade!lient through the ;2000 and then upload the installation pa!7age to the BAthrough the upgrade !lient" @therwise# you need to upload the installationpa!7age to the ;2000 ser>er and download the installation pa!7age fro the;2000 ser>er to the BA /efore starting the upgrade !lient through the ;2000"
he >ersions earlier than the %&C'00000*008C01%0+1&P2? do not supportupgrade through the ;2000"
)tep 1 &tart the ;2000 !lient"
)tep 2 In the !ase of upgrade fro %&C'810200*011C00&PC100 or its pat!h# you needto set the *BC as an 4P ser>er on the ;2000" @therwise s7ip this step and go to
&tep 3"
1" Choose )oft+areN 8ile )er*er )etting" he 8ile )er*er )ettingdialog /o: isdisplayed# as shown in4igure 2"1"
2" Cli!7 R%,on the na>igation tree in the left pane# sele!t a designated *BC in theleft pane# and then !hange the nae under the 8ile )er*er %a(earea to that ofthe !urrent *BC"
2
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
24/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
8igre 2.1 4ile ser>er setting
)tep 3 In the !ase of the BA type to /e upgraded is *BC (%&C'810) or %&C'00# you needto upload the installation pa!7age through the ;2000" 4or details on the re=uiredinstallation pa!7age# see 3"?"1 I&tep 11a/le 1"1" In the !ase of the BA type to /eupgraded is %&C'000# s7ip this step and go to &tep ?"
1" Choose )oft+are N )oft+areBro+ser" . window is displayed" &ele!t an BAtype to /e upgraded fro the O, )er*erta/ on the left na>igation tree"
2" @n the Upgrade )oft+are Pacageta/ page# !li!7 $ransferDand then !hoose8ro( O, ,lient to O, )er*er" . dialog /o: is displayed# as shown in4igure 2"1"
;a7e sure that all the installation pa!7ages re=uired in the upgrade are uploadedunder the Upgrade )oft+are Pacageta/"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
3
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
25/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
8igre 2.1 &ele!ting upgrade software pa!7age
3" Cli!7 )elect" . dialog /o: is displayed" &ele!t the dire!tory00*012C01&PH+13inthe target installation pa!7age to /e uploaded to the;2000 ser>er and !li!7 O@" If /aseline installation pa!7age00*012C01&PC+00 or interediate >ersion installation pa!7age200*011C00&PC100is re=uired# they !an /e sele!ted at the sae tie" Cli!7,onfir(in the dialog /o: shown in 4igure 2"1 to start uploading the installationpa!7age to the ;2000 ser>er"
?" .fter the installation pa!7ages are uploaded to the ;2000 ser>er# sele!t target>ersion installation pa!7age 00*012C01&PH+13 fro the list /o: on theUpgrade )oft+are Pacage ta/ page" Cli!7 $ransferand sele!t 8ro( O,)er*er to %7" . dialog /o: is displayed" &ele!t the BA to /e upgraded and !li!7O@" he ;2000 autoati!ally downloads the installation pa!7age fro the;2000 ser>er to the BA" If /aseline installation pa!7age or interediate >ersioninstallation pa!7age need to /e downloaded# repeat this step"
)tep 4 &tart the upgrade !lient" Choose )oft+areN )oft+areBro+ser" . window isdisplayed" &ele!t an BA type to /e upgraded fro the O, )er*erta/ on the leftna>igation tree" Cli!7 Upgrade )oft+are Pacage in the right pane"
I/... The"...
he %&C'000 is to /eupgraded to the00*012C01&PH+13#
Cli!7 Upgrade" &ele!t the BA to /e upgraded in thedisplayed dialog /o:# sele!t the dire!tory where theupgrade !lient progra is sa>edEV;99R912,91)P513C:re(oteclient" Cli!7 O@ andthen go to?"2EConfiguring the %asi! Inforation ./outthe ,pgrade"E
?
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
26/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
@ther upgrade s!enario Choose the target >ersion installation pa!7ageV;99R912,91)P513and then !li!7 Upgrade" &ele!tthe BA to /e upgraded in the displayed dialog /o:# and!li!7 O@" he o+nload Upgrade $ooldialog /o: is
displayed# showing the download progress" Cli!7 O@and the upgrade !lient starts autoati!ally" Pro!eed withthe operations des!ri/ed in se!tion ?"2EConfiguring the%asi! Inforation ./out the ,pgrade"E
----7nd
4.1.2 Starti"g the Upgrade C#ie"t Through the C#ie"t
)tep 1 *un Re(ote,lient?eng.e#ein the dire!tory of target >ersion installation pa!7ageV;99R912,91)P513" . window is displayed"
;a7e sure that the Re(ote,lient?eng.e#eprogra in the dire!tory of target >ersioninstallation pa!7ageis e:e!uted" If ultiple installation pa!7ages are re=uired for theupgrade# you ust deterine the installation pa!7ages of the target >ersiona!!ording to the installation pa!7ages listed in3"?"1 I&tep 11a/le 1"1"
)tep 2 *ight-!li!7 %7 iston the left pane of the window# and then !hoose "dd %7fro theshort!ut enu" . dialog /o: is displayed# as shown in 4igure 1"1"
8igre 1.1.dding an BA
)tep 3 Anter %7 %a(eD 7#ternal Virtal 'P "ddress of the BA to /e upgraded" If the BA!annot !ouni!ate with the !lient dire!tly# an A;& pro:y ser>er is re=uired for the
upgrade" &ele!t 7) Pro#> 'P "ddress# and enter the IP address of the A;& pro:y
ser>er".n BA is added su!!essfully"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
+
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
27/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
%7 %a(eis used to identify an BA" It !onsists of only letters# nuerals# E-E# and EKE!hara!ters"
In the !ase of upgrade fro the %&C'000 to the 00*012C01&PH+13# 7#ternal Virtal'P "ddressrefers to the 7#ternal 'P "ddress"
)tep 4 *epeat fro&tep 2to&tep 3to add ultiple BAs" 9ou are ad>ised not to upgradeore than 10 BAs at the sae tie"
.fter an BA is added# the rele>ant%7 %a(e# 7#ternal Virtal 'P "ddress# and 7)Pro#> 'P "ddress !annot /e odified" o odify the BA nae or the IP address of an BA#delete the BA and then add it again"
If ultiple BAs are added# they !an /e upgraded at the sae tie" 9ou !an dou/le-!li!7 anBA in the na>igation tree on the left or sele!t an BA in the inforation page of the BA toswit!h /etween BAs" &e!tions ?"2EConfiguring the %asi! Inforation ./out the ,pgradeE#?"3EPerforing Pre-,pgradeE# and?"?EPerforing ,pgradeE des!ri/e the upgrade of anBA"
he following des!ri/es the pro!edure for upgrading one BA"
----7nd
4.2 Co"/iguri"g the 0asi! I"/or(atio" A+out the Upgrade
his se!tion des!ri/es how to !onfigure the /asi! inforation a/out the upgrade"
)tep 1 ou/le-!li!7 the BA to /e upgraded in %7 istin the left pane" . window isdisplayed# as shown in 4igure 1"1"
8igre 1.1 Input &tep 1
'
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
28/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
)tep 2 Anter the Pass+ord of "d(in User" &ele!tUpgradeand !li!7 %e#t" he systeautoati!ally o/tains the >ersion inforation# as shown in 4igure 1"1"
If the user .din is online# e:it the $; that is !onne!ted to the @;, (you !an run the )$OP!oand to =uery the IP address of the PC on whi!h the .din user log in to the $;)#and then restart the $;"
8igre 1.1 Input &tep 2
)tep 3 (Perfor this step only in the !ase of an upgrade fro the %&C'000 to the00*012C01&PH+13) Anter the Pass+ord for ser root of te acti*ein &tep24igure 1"1"
)tep 4 (4or upgrade fro the %&C'810200*010C01%0'1 or its pat!h >ersions to the00*012C01&PH+13 only) &ele!t 'nter(ediate Versionand enter
B),6
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
29/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
8igre 1.1 Input &tep 3
)tep 6 5hen upgrading fro the %&C'000# %&C'810# 00*011C00&PCD00 and its pat!h>ersions to the 00*012C01&PH+13# upload the new li!ense file in the window
shown in &tep +4igure 1"1&tep +4igure 1"1"&ele!t the %e+ license file !he!7 /o:#and !li!7 Bro+se license file to sele!t the li!ense file" Cli!7Open" he upgrade!lient autoati!ally uploads the new li!ense file to the @;,# and the new li!ense isa!ti>ated autoati!ally" In other upgrade s!enarios# s7ip this step"
)tep ! ,pload the installation pa!7age re=uired for the upgrade in the window shown in&tep +4igure 1"1"
9ou ust !hoose to upload installation pa!7ages if the >ersion files are notdownloaded to the BA through the ;2000 and theinstallation pa!7ages are notuploaded to the @;, through the upgrade !lient" @therwise# s7ip this step"
1" Cli!7 Upload installation pacage files" he installation pa!7age starts to /euploaded autoati!ally" If /aseline >ersion installation pa!7ageV;99R912,91)P,599is re=uired (for details# see3"?"1 I&tep 11a/le 1"1)#sele!t the Bro+se *ersion installation pacageand sele!t the dire!toryV;99R912,91)P,599to /e uploaded in the displayed dialog /o:" @therwise#go to 2"
8
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
30/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
2" %ut if the upgrade is fro the %&C'810200*010C01%0'1 or its pat!h >ersionsto the 00*012C01&PH+13# the interediate >ersion installation pa!7age isre=uired (for details# see 3"?"1 I&tep 11a/le 1"1)" .fter the /aseline >ersioninstallation pa!7age is sele!ted# the interediate >ersion installation pa!7ageV299R911,99)P,199 (for details# see 3"?"1 I&tep 2) ust /e sele!ted also"
Cli!7 O@ and the upgrade !lient autoati!ally uploads the installation pa!7ageto the @;,"
he running upgrade tool is in the dire!tory of target >ersion installation pa!7ageV;99R912,91)P513" &o the upgrade tool !an autoati!ally o/tain the path of target >ersioninstallation pa!7age" o not sele!t the target >ersion installation pa!7age in &tep +4igure 1"1"
3" .fter the upload is finished# !li!7 Pre-pgradeto pro!eed with the operationsdes!ri/ed in se!tion ?"3EPerforing Pre-,pgrade"E
----7nd
4.3 *er/or(i"g *re6Upgrade
he upgrade tool autoati!ally perfors pre-upgrade operations after you !li!7 Pre-upgrade" he pre-upgrade does not affe!t ongoing ser>i!es"
his se!tion des!ri/es the !he!7 /efore the upgrade and the pre-upgrade of the @;,software and data"
here are three !olors in the upgrade report 5hite indi!ates that the upgrade su!!eeds#and yellow indi!ates a warning# so you !an !ontinue with the upgrade after you !he!7 thewarning# and red indi!ates that the !orresponding pro/le ust /e sol>ed /efore you !an!ontinue the upgrade"
5hen upgrading ultiple BAs# you !an onitor the !onne!tions of all BAs through theonitoring dialog /o:" If any e:!eption o!!urs# dou/le-!li!7 the essage in red to dire!tlygo to the rele>ant BA onitoring page for !onfiration"
4or details on the /a!7up files# see se!tionD"2E%a!7up 4iles In>ol>ed in the ,pgradeE"
4or details on the upgrade !he!7 ites# see se!tion D"3EItes of the .utoati! Che!7 E"
)tep 1 .fter the pre-upgrade is !oplete# a window is displayed# as shown in 4igure 1"1"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
31/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
8igre 1.1 Che!7ing report after the pre-upgrade
)tep 2 Cli!7 ,ec Report to >iew the pre-upgrade result"
If the pre-upgrade fails# !orre!t the erroneous data a!!ording to the proptedessages" Cli!7 Bac to return to the pre>ious step# and then perfor the pre-upgrade again"
If the pre-upgrade is su!!essful# !li!7 %e#tto pro!eed with the upgradee:e!ution"
If the upgrade e:e!ution is not re=uired at the oent# !li!7 Fitto end the pre-upgrade and e:it the upgrade !lient"
----7nd
4.4 *er/or(i"g Upgrade
his se!tion des!ri/es how to upgrade the @;, to the latest >ersion and restart the host"he syste autoati!ally perfors the upgrade"
In ,@J, upgrade ode# !ells need to /e /lo!7ed when the /andwidth resour!es of the!ore networ7 is insuffi!ient" %lo!7 the !ells a!!ording to the 4.s on the upgrade !lient"
)tep 1 he syste autoati!ally perfors the upgrade" . window is displayed# as7ing youwhether to upgrade the @;, to the latest >ersion# as shown in 4igure 1"1"
10
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
32/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
8igre 1.1 Confiration window
)tep 2 Cli!7 O@in the dialog /o: shown in &tep 14igure 1"1to upgrade the @;, to thelatest >ersion" . dialog /o: is displayed for !onfiration" Cli!7Ges" In the !ase of
upgrade fro the %&C'000J%&C'810 to the 00*012C01&PH+13# the ;2000dete!ts that the BA type is !hanged to %&C'00 and swit!hes to the liited odeautoati!ally" hen# the ;2000 starts to transfer the BA data autoati!ally"
If the ;2000 !lient is !onne!ted during the upgrade pro!ess# a dialog /o: is displayed#propting that the ;2000 autoati!ally swit!hes to the liited ode" 9ou !an infer that the;2000 starts to transfer the BA data"
)tep 3 .fter the swapping# the !onfiration window displays updated inforation# as shownin 4igure 1"1"Cli!7 O@to reset the host" . dialog /o: is displayed for your!onfiration" Cli!7Ges"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
11
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
33/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
uring the upgrade fro %&C'810200*010C01%0'1 or its pat!h >ersions to the
00*012C01&PH+13# the &C, /oard is reset during the upgrade or roll/a!7pro!ess" he host# howe>er# delays in sending the essage# indi!ating that the&C, /oard is reset su!!essfully" In this !ase# a essage reading G*eset !ontrollerH@& result Affe!ti>e ode setting failed" is displayed in the upgrade !lientindi!ating that the &C, /oard fails to /e reset" Cli!7 Continue"
uring the upgrade fro %&C'00 00*011C00&PCD00 or its pat!h >ersions
(e:!ept the >ersions later than %&C'00 00*011C00&PHD2') to the %&C'0000*012C01&PH+13# the &C, /oard in the ;P& is a/norally reseto!!asionally during the upgrade" If this happens# a essage reading G*eset!ontroller H@& result Affe!ti>e ode setting failed" is displayed on the upgrade!lient" 5ait three inutes# and !li!7 Retr>"
8igre 1.1 Confiration window with updated inforation
)tep 4 .fter the reset# the !onfiration window displays updated inforation# as shown in4igure 1"1" Pro!eed with the ser>i!e >erifi!ation" *e!ord the tie when the upgradee:e!ution is finished for spe!ifying the Upgrade ti(ein the operation des!ri/ed in+"2"2 I&tep ?"
12
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
34/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
If ultiple BAs !ontrolled /y one ;&C are upgraded at the sae tie# the hosts
of ea!h BA !annot /e reset at the sae tie" he inter>al /etween the resets ofhosts should /e at least fi>e inutes" @therwise# the ;&C ay /e !ongested for ashort tie"
In /at!h upgrade in C !on>ergen!e networ7# reset the sla>e %&C# and then resetthe aster %&C 30 inutes after the sla>e %&C is reset (the upgrade of the sla>e%&C is !opleted)" 4or details on what C !on>ergen!e networ7 is# see 8"Finthe upgrade tool"
8igre 1.1 Confiration /o: /efore >erifying the ser>i!es
)tep 5 In the !ase of upgrade fro the %&C'000J%&C'810 to the 00*012C01&PH+13#!he!7 that the data transfer on the ;2000 side is su!!essful /y referring to se!tion2"3 Euerying the &tatuses of ,pgrade as7sE in the BSC6900 V900R012C01 (ataRelo-atio! Guide+!l& *or M2000 Co''o! Versio! is V200R010,"
If the ;2000 !lient is !onne!ted during the upgrade pro!ess# a dialog /o: is displayed#propting that the ;2000 swit!hes to the ulti-user ode autoati!ally" 9ou !an infer that the;2000 has transferred the BA data su!!essfully"
)tep 6 erify the ser>i!e" 4or the ser>i!e >erifi!ation ethods# see se!tion +EPost-,pgradeerifi!ationE"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
13
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
35/50
? ,pgrade @perations
%&C'00 00*012C01&PH+13
,pgrade uide
I/... The"...
he >erifi!ation issu!!essful#
Cli!7 Ges to pro!eed with the upgrade" . dialog /o: isdisplayed for your !onfiration" Cli!7 Ges" . dialog /o: isdisplayed# as shown in 4igure 1"1"
he >erifi!ationfails#
Cli!7 %o to!he!7 the report# the then !li!7 %e#tto roll /a!7the >ersion" he roll/a!7 is autoati!ally e:e!uted"
8igre 1.1 Che!7ing the report
)tep ! Cli!7 ,ec Reportin the dialog /o: to !he!7 the upgrade report" Cli!7 8inistoend the upgrade" . dialog /o: is displayed for your !onfiration" Cli!7Ges"
he reports and logs generated /y the upgrade !lient will o>erwrite the e:isting reports andlogs" It is re!oended that they /e ar!hi>ed for future use" If you ha>e perfored theupgrade operations through the ;2000# the reports and logs will /e sa>ed in the dire!tory:Hianager2999,lient0:client:R%,Upgrade$ool:V;99R912,91)P513:re(oteclient:Report" If you ha>e perfored the upgrade operations through the upgrade !lient# thereports and logs will /e sa>ed in the dire!toryV;99R912,91)P513:re(oteclient:Report"
o not delete the upgrade files sa>ed in O@;,K*ootPathQ/s!QupgradeQ on the @;, afterthe upgrade"
1?
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
36/50
%&C'00 00*012C01&PH+13
,pgrade uide ? ,pgrade @perations
)tep < If the BA transfer tool is started on the ;2000 side /efore the upgrade# stop the BAtransfer tool after the upgrade is !oplete" 4or details# see se!tion 2"? E&topping the*elo!ation oolE in the BSC6900 V900R012C01 (ata Relo-atio! Guide +!l& *orM2000 Co''o! Versio! is V200R010,"
----7nd
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
1+
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
37/50
5 Post-Upgrade VerificationPost-upgrade >erifi!ation in>ol>es the BA health !he!7 and ser>i!e >erifi!ation" heBA health !he!7 dete!ts the radio resour!es and operating status of the BA syste#and the ser>i!e >erifi!ation !he!7s whether BA ser>i!es are pro>ided properly afterthe upgrade"
5.1 *ost6Upgrade NE Hea#th Che!)
he post-upgrade health !he!7 on the networ7 is used to deterine whether theupgrade su!!eeds" he report of the post-upgrade health !he!7 is !opared withthat of the pre-upgrade health !he!7 to indi!ate the differen!e /etween the operatingstatus of the upgraded BA and its original status"
5.1.1 *er/or(i"g the *ost6Ugrade NE Hea#th Che!)4or details on how to perfor the health !he!7 on the networ7 after the upgrade# seese!tion 3"2EPerforing the BA Health Che!7E"
5.1.2 Co(pari"g the -eport o/ the *ost6Upgrade Hea#th Che!) ithThat o/ the *re6Upgrade Hea#th Che!)
he BA health !he!7 has /een perfored and the report on BA health !he!7 has /eensa>ed /efore the upgrade /egins" herefore# you !an !opare the post-upgrade BAhealth !he!7 report with the pre-upgrade BA health !he!7 report"
o !opare the post-upgrade BA health !he!7 report with the pre-upgrade BA health!he!7 report# do as follows
)tep 1 Choose aintenanceN %7 ealt ,ecfro the enu /ar on the ;2000 !lient"
)tep 2 Cli!7 ,o(pare Reports" he ,o(pare Reportsdialog /o: is displayed"
)tep 3 In the Report1/o:# sele!t the tas7 nae of the BA health !he!7 /efore the upgrade frothe $asdrop-down list /o:" In the Report2/o:# sele!t the tas7 nae of the BA health
!he!7 after the upgrade fro the $asdrop-down list /o:"
)tep 4 In the Report1and Report2/o:es# sele!t Report eneration $i(e"
)tep 5 Cli!7 ,o(pareto !opare the report on BA health !he!7 /efore the upgrade with
that on BA health !he!7 after the upgrade"
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
38/50
' ersion *oll/a!7
%&C'00 00*012C01&PH+13
,pgrade uide
)tep 6 .fter the !oparison is !oplete# the )a*e dialog /o: is displayed" &ele!t a path forsa>ing the !oparison report on the PC" iew the !oparison report# and then findout the differen!es of the BA status /efore and after the upgrade"
----7nd
5.2 *ost6Upgrade Ser'i!e eri/i!atio"
.fter the upgrade is !oplete# you need to >erify the BA ser>i!es anually andthrough the ;2000 to deterine whether the BA ser>i!es are noral" o test the/asi! !alling pro!edure# you !an >erify the BA ser>i!es anually" o !he!7 whetherthe traffi! statisti!s are noral# you !an >erify the BA ser>i!es through the ;2000"
5.2.1 eri/yi"g Ser'i!es 5a"ua##y
erify the BA ser>i!es anually" 4or details# see the.$$e!di" BSC6900V900R012C01 U$%rade .--e$ta!-e Cases"
5.2.2 eri/yi"g Ser'i!es Through the 5$%%%
9ou !an >erify the BA ser>i!es through the ;2000 !opare the >alues of the MPIsreported /y the BA e>ery fi>e inutes with the standard >alues and the histori!al>alues of the MPIs to deterine whether the BA ser>i!es are noral" he operationsteps are as follows
)tep 1 @n the ;2000 !lient# !hoose aintenanceN $as anage(ent" . window isdisplayed" Cli!7 %e+ at the right hand /otto !orner for the new tas7" he%e+ $asdialog /o: is displayed"
)tep 2 Anter the tas7 nae in the$as %a(e/o:# sele!t Upgrade ,ecingin the $as$>pe/o:# and !li!7 %e#t" . dialog /o: is displayed"
)tep 3 &et the )tart $i(e to Rn "t Onceand !li!7 %e#t"
)tep 4 &ele!t the BA whose ser>i!es are to /e upgraded# the ObIect t>pe(9ou !an sele!t!ounters of different o/
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
39/50
%&C'00 00*012C01&PH+13
,pgrade uide ' ersion *oll/a!7
8igre 1.1 &ele!ting MPIs
)tep 5 Cli!7 8inis" he $as anage(entwindow is returned" he ;2000 autoati!ally>erifies the BA ser>i!es a!!ording to the upgrade tie"
he ser>i!e >erifi!ation generally ta7es 30 inutes"
)tep 6 he MPIs with optial >alues are displayed on the ;2000 !lient" 9ou !an sele!t theObIect t>pe to >iew the MPIs of different easureent o/
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
40/50
' ersion *oll/a!7
%&C'00 00*012C01&PH+13
,pgrade uide
Current >alue he result of the !ounter that is reported /y the BA"
Histori!al >alue he a>erage >alue of the !ounters that are !olle!ted in the sae periodse>en days /efore the upgrade" he period starts fro one hour /efore the ser>i!e>erifi!ation starts" 4or e:aple# the ser>i!e >erifi!ation starts fro 1200 200-2-11# then
the histori!al >alue is the a>erage >alue of the !ounters that are !olle!ted fro 1200 to1300 ea!h day fro 200-2-? to 200-2-10"
&tandard >alue he referen!e >alue a!!ording to whi!h the result of the !ounter isdeterined !orre!t or not"
If there is any !ounter that does not eet the standard >alue# !onta!t Huawei for te!hni!alsupport"
)tep < .fter the BA ser>i!e >erifi!ation is !oplete# a essage reading Eas7 runsu!!essfully" Please sa>e the reportE is displayed in the )((ar> 'nfo/o:" Cli!7)a*e ogto sa>e the result of the ser>i!e >erifi!ation to the lo!al PC for future use"
----7nd
?
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
41/50
6 Version RollbacIf there are any defe!ts after the upgrade# roll /a!7 the >ersion or pat!h to the originalone /y following the roll/a!7 pro!edure"
6.1 *ro!ess o/ ersio" -o##+a!)
a/le 1"1 lists the roll/a!7 pro!ess and tie re=uired at ea!h step of the >ersionroll/a!7 pro!ess"
$able 1.1 ie re=uired at ea!h step of the >ersion roll/a!7 pro!ess
-o##+a!) Operatio" Ti(e Co"su(ed 3U"it7 (i"4 -e(ar)s
&tart the roll/a!7 R 1 -
Configure the roll/a!7data
R 1 -
Perfor the roll/a!7 o roll /a!7 to the %&C'000 1+-'0"
o roll /a!7 to the %&C'810#00*011C00&PCD00 or its pat!h>ersions# or to roll /a!7 to the00*012C01&PC200 or its pat!h>ersions 10-20"
Pat!h roll/a!7 10-30"
-
erify the upgrade 30-'0 -
6.2 Preparing ata 8or ata Relocation Before teRollbac
In the !ase of roll/a!7 fro the 00*012C01&PH+13 to the %&C'000J%&C'810#
you should prepare data /efore the roll/a!7" 4or details# see se!tions 3"2 EPreparing
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
42/50
' ersion *oll/a!7
%&C'00 00*012C01&PH+13
,pgrade uide
for the *oll/a!7E and 3"3 E&tarting the ,pgrade&er>erE in thBSC6900V900R012C01 (ata Relo-atio! Guide+!l& *or M2000 Co''o! Versio! isV200R010,#
6.3 -o##+a!) Operatio"s
If you ha>e perfored pat!h installation and !onfigured data anually after thepat!h installation# pat!h roll/a!7 is a dangerous a!tion /e!ause the additional!onfiguration data after pat!h upgrade will /e lost" If the pat!h roll/a!7 is re=uired#!onta!t Huawei !ustoer ser>i!es !enter# and as7 the !ustoer ser>i!e personnelto !onta!t Huawei head=uarters and to !he!7 whether the pat!h roll/a!7 isallowed" %a!7 up the odified !onfiguration data /y referring to the G%a!7ing upthe &yste ata in the BSC6900 MU .d'i!istrator Guide/efore perforingroll/a!7 operations if the roll/a!7 operations are andatory" In addition# reset the%&C anually after the roll/a!7 to ensure that the host data is !onsistent with the%.; data"
In ,@J, roll/a!7 ode# !ells need to /e /lo!7ed when the /andwidth resour!es
of the !ore networ7 is insuffi!ient" %lo!7 the !ells /y referring to the 4.s on theupgrade !lient"
o perfor roll/a!7# do as follows
)tep 1 &tart the upgrade !lient and add an BA whose >ersion is to /e rolled /a!7"
'f... $en...
he upgrade !lient is startedusing the ;2000#
Perfor the operations des!ri/ed in ?"1"1 I&tep ?5here"
Bote Choose )oft+areN )oft+areBro+ser" .window is displayed" 9ou ust sele!t an BA typeto /e rolled /a!7 fro the O, )er*erta/ on theleft na>igation tree"
he upgrade !lient is started
dire!tly#
Perfor the operations des!ri/ed in G?"1"2&tarting
the ,pgrade Client hrough the Client"
In the !ase of rolling /a!7 to the %&C'810 or %&C'000# if start of the upgrade tool through the;2000 fails# !he!7 if there is installation pa!7age under the !urrent BA type" If not# upload theinstallation pa!7age of !urrent >ersion to ;2000 ser>er" 4or detailed operation# see se!tion?"1"1"
)tep 2 ou/le-!li!7 the BA to /e rolled /a!7 in the left pane of the window" he window isrefreshed# as shown in ?"2"1 I&tep 14igure 1"1"Anter the Pass+ord of "d(in andsele!t an operation Rollbac" Cli!7 %e#t" he window is refreshed# as shown in
4igure 1"1"
2
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
43/50
%&C'00 00*012C01&PH+13
,pgrade uide ' ersion *oll/a!7
8igre 1.1 *oll/a!7 window
)tep 3 he upgrade !lient autoati!ally o/tains the ,rrent Versionand $arget Version"
I/... The"...
*oll/a!7 fro the00*012C01&PH+13 to the%&C'000#
Anter the password for user root of the a!ti>e@;, in the Pass+ord for ser root of teacti*e /o:# and !li!7 %e#t" . window isdisplayed# as shown in4igure 1"1"
@ther roll/a!7 s!enario# Cli!7 %e#t. . window is displayed# as shown in4igure 1"1"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
3
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
44/50
' ersion *oll/a!7
%&C'00 00*012C01&PH+13
,pgrade uide
8igre 1.1 Configuration inforation a/out >ersion roll/a!7
)tep 4 Cli!7 7#ecte" he upgrade tool autoati!ally perfors the roll/a!7" .fter theroll/a!7 in the preparation phase is !oplete# !li!7 ,ec Report" he result of the
!he!7 report is autoati!ally opened and the %e#t/utton is a>aila/le at the saetie" Cli!7 %e#t to pro!eed with the e:e!ution phase" . dialog /o: is displayed foryour !onfiration" Cli!7Ges"
)tep 5 uring the >ersion roll/a!7# !li!7 O@if the upgrade tool propts you to swap the@;, to the latest >ersion or reset the host# as shown in ?"?"1 I&tep 14igure 1"1and?"?"1 I&tep 34igure 1"1" . dialog /o: is displayed for your !onfiration" Cli!7Ges".fter the roll/a!7# a dialog /o: is displayed# as shown in ?"?"1 I&tep '4igure 1"1"Che!7 the report and !li!7 8inisto finish the roll/a!7" . dialog /o: is displayed foryour !onfiration" Cli!7Ges"
I/8 The"8
*oll/a!7 fro the00*012C01&PH+13 to the%&C'000J%&C'810
Perfor the post-upgrade pro!essing /y referringto se!tion'"?EPost-*oll/a!7 Pro!essingE"
@ther roll/a!7 s!enario erify ser>i!es /y referring to se!tion +"2EPost-,pgrade &er>i!e erifi!ation"E
?
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
45/50
%&C'00 00*012C01&PH+13
,pgrade uide ' ersion *oll/a!7
he reports and logs generated /y the upgrade !lient will o>erwrite the e:isting reports andlogs" It is re!oended that they /e ar!hi>ed for future use" If you ha>e perfored theroll/a!7 operations through the ;2000# the reports and logs will /e sa>ed in thedire!tory
:Hianager2999,lient0:client:R%,Upgrade$ool:V;99R912,91)P513:re(oteclient:Report" If you ha>e perfored the roll/a!7 operations through the upgrade !lient# thereports and logs will /e sa>ed in the dire!toryV;99R912,91)P513:re(oteclient:Report"
o not delete the upgrade files sa>ed in O@;,K*ootPathQ/s!QupgradeQ on the @;, afterthe roll/a!7"
----7nd
6.4 *ost6-o##+a!) *ro!essi"g
6.4.1 ata Rollbac on te 2999 and )er*ice Verification
)tep 1 In the !ase of roll/a!7 fro the 00*012C01&PH+13 to the %&C'000J%&C'810#roll /a!7 the BA data on the ;2000 side /y referring to !hapter 3"+S3"8 in theBSC6900 V900R012C01 (ata Relo-atio! Guide +!l& *or M2000 Co''o! Versio!is V200R010,"
)tep 2 Perfor post-upgrade ser>i!e >erifi!ation" 4or details# see se!tion +"2EPost-,pgrade&er>i!e erifi!ationE" Ansure that the test !ases are the ones of the >ersion /eforethe upgrade"
----7nd
6.4.2 at to o 'f Boards 8ail to Be oaded "fter te B),6;99's Rolled Bac to te B),6999J
)tep 1 $og in to the %&C'000 $; to display the loading progress /ar" iew the /oardloading progress" If the /oard loading progress is not displayed# go to &tep 2" If the/oard loading progress stays at ?0T for ore than fi>e inutes and the fault !annot/e re!tified e>en if the &C, /oards are reo>ed and then installed# go to &tep 3"
)tep 2 *eo>e the two &C, /oards fro su/ra!7 0# and install the one to two inuteslater"
)tep 3 $og in to the @;, or %.; using the Pu9 software and then run the reboot!oand on the Pu9 to reset the @;, or %.;" If a!ti>e and stand/y @;,sare !onfigured# reset the stand/y @;, and then the a!ti>e @;,"
)tep 4 If the fault persists# !onta!t Huawei !ustoer ser>i!e !enter# and re=uest it to !onta!tHuawei Head=uarters"
----7nd
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
+
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
46/50
! "ppendi#!.1 Upgrade -e!ords
4or details# see the.$$e!di" BSC6900 V900R012C01 U$%rade .--e$ta!-e Cases"
!.2 0a!)up 2i#es I"'o#'ed i" the Upgrade
$able 1.1 %a!7up files in>ol>ed in the upgrade
0a!)up Ite( 0a!)up Lo!atio" -e(ar)s
ata s!ript MURootPat/u$%radeNe4Versio!$osu$%rades-6000-*%a#daton the @;,K. inthe !ase of an upgrade fro the%&C'000 to the00*012C01&PH+13"
MURootPat/u$%radeNe4Versio! 7 $os 84i!u$%rade
s-6900-*%a#daton the @;,K. inthe !ase of other upgrades"
.utoati!ally/a!7ed up /y theupgrade tool"
Current running
inforation#in!luding the CBinforation# /oard>ersion inforation#and !ell inforation
re'ote-lie!tRe$ortN: Na'e
Pre$aratio!MMLRe$ort#t"t on theupgrade !lient"
1" .utoati!ally
/a!7ed up /ythe upgradetool"
2" he upgradereport displaysthe progress"
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
47/50
D .ppendi:
%&C'00 00*012C01&PH+13
,pgrade uide
0a!)up Ite( 0a!)up Lo!atio" -e(ar)s
Current routinginforation
re'ote-lie!tRe$ortN: Na'ePre$aratio!Route;!*o#t"t on theupgrade !lient"
1" .utoati!ally/a!7ed up /ythe upgradetool"
2" he upgradereport displaysthe progress"
Certifi!ate files MURootPat/u$%radeNe4Versio!su$$ort -erton the @;,K."
.utoati!ally/a!7ed up /y theupgrade tool"
!.3 Ite(s o/ the Auto(ati! Che!)
$able 1.1 Ites autoati!ally !he!7ed during the upgrade
Che!) Ite( Criterio" -e(ar)s
ersion of the@;, Athernetadapter dri>er
If the @;, is installed with the &use$inu: "3 operating syste# intele1000 Athernet adapter D"2"D-B.PIdri>er# and &.& hardware 3"02"'2dri>er# the upgrade !lient propts
the user to upgrade the @;,Athernet adapter dri>er"
-
efaultgateway!onfiguration
he default gateway !onfiguration is!orre!t"
-
Current userauthority
@nly user ad(inor roothas theauthority for the @;, operatingsyste"
-
Coputernae of the
@;,
he !oputer nae of the @;,!olle!ted /y the upgrade !lient is
!onsistent with that of the @;, inuse"
-
IP address ofthe @;,
he IP address of @;, !olle!ted /ythe upgrade !lient is !onsistent withthe one !urrently /eing used"
-
$i!ense files If a new li!ense is sele!ted# the newli!ense file ust /e sa>ed toMURootPat/u$%radeNe4Versio!su$$ortli-e!sea-ti)e#
A:!ept for pat!hinstallation"
2
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
48/50
%&C'00 00*012C01&PH+13
,pgrade uide D .ppendi:
Che!) Ite( Criterio" -e(ar)s
4ile of dataupgrade rule
he file of rule for upgrading the!urrent >ersion to the target >ersionis a>aila/le"
-
%&C networ7!onfiguration
he internal and e:ternal Athernetadapters are !onfigured !orre!tly"
1" he e:ternal Athernet port is/ond1# the @;, internal Athernetport is /ond0"1# and the %.;internal Athernet port is /ond0";oreo>er# the e:ternal Athernet portis !onne!ted to the internal Athernetport properly"
2" he %&C'000 networ7!onfiguration file is /a!7ed up"
3" he networ7 !onfiguration file forthe %&C'00 is generated"
his ite should /e!he!7ed only in the !aseof upgrade fro the%&C'000 to the00*012C01&PH+13"
ata/asesyn!hroniFation
he data syn!hroniFation is noralin dual-@;, ode"
his ite need not /e!he!7ed in the !ase ofupgrade fro the%&C'000 to the00*012C01&PH+13"
@peratingstatus of/oards
Bo /oard is faulty"
If any /oard is faulty# the upgrade!lient propts the user to re!tify thefault"
his ite need not /e!he!7ed in the !ase ofupgrade fro the
%&C'000 to the00*012C01&PH+13"
is7 spa!e onthe @;,
he free dis7 spa!e ta7es ore than1+T of the total dis7 spa!e" he freespa!e of the hard dis7 where the@;, is installed is not less than 2"+%# and the free spa!e of thesyste dis7 is not less than 2 %"
Issue 01 (2011-03-28)
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
3
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
49/50
D .ppendi:
%&C'00 00*012C01&PH+13
,pgrade uide
!.4 $ist of %&C'00 @;, Ports that .re Bot Ana/led on the%&C'000 or %&C'810 @;,
$able 1.1 $ist of %&C'00 @;, ports that are not ena/led on the %&C'000 @;,
Port!o"
#erviceProcess
Description !et$or Protocol%&pe
!et$or#egment'()ternal!et$or*
20 4P&er>erdata
Host loadingJuploading anddownloading of software and logs(in a!ti>e ode)
CP 9
80
we/lt
Port for lo!al aintenan!e and/rowser !onne!tionhis port is !onne!ted to the $;for aintenan!e"
CP 9
??3 we/lt Port used to esta/lish anen!ryption !onne!tion /etween a/rowser and the $;# thereforea!hie>ing BA aintenan!e
CP 9
8?3 we/lt Port used for !ouni!ation/etween the $; and an BA#therefore a!hie>ing BA
aintenan!e
CP 9
8000esKgate
Port for aintenan!e (&&$en!ryption)
CP 9
8001esKgate
Port for alar !onsole (&&$en!ryption)
CP 9
800'esKgate
Port for aintenan!e (&&$en!ryption)
CP 9
8088 ool for reote
upgrade
ool for reote upgrade (&&$
en!ryption)
CP 9
80esKgate
&yn!hroniFing the @;, data withthe ;2000 data (&&$ en!ryption)
CP 9
8100 esKgate .lar /o: (&&$ en!ryption) CP 9
11DD+ onitor ual-@;, ,P 9
1'002
esKgate
Port through whi!h theperforan!e odule reportsnotifi!ation essages
CP 9
?
Huawei Proprietary and Confidential
Copyright Huawei e!hnologies Co"#
$td
Issue 01 (2011-03-28))
8/12/2019 BSC6900 V900R012C01SPH513 Version Upgrde Guide
50/50
%&C'00 00*012C01&PH+13
,pgrade uide D .ppendi:
Port!o"
#erviceProcess
Description !et$or Protocol%&pe
!et$or#egment'()ternal
!et$or*
18002
esKgate
Port through whi!h theperforan!e odule reportsnotifi!ation essages (&&$en!ryption)
CP 9
@thers(reser>ed)
Host loadingJuploading anddownloading of software and logs(in a!ti>e ode)
- -
$able 1.2 $ist of %&C'00 @;, ports that are not ena/led on the %&C'810 @;,
Port!o"
#erviceProcess
Description !et$or Protocol%&pe
!et$or#egment'()ternal!et$or*
22
&&H(operatingsyste
ser>i!e)
&&H port for reotely logging in
to the @;,a /oard
CP 9
80 we/lt
Port for lo!al aintenan!e and/rowser !onne!tionhis port is !onne!ted to the $;for aintenan!e"
CP 9
??3 we/lt Port used to esta/lish anen!ryption !onne!tion /etween a/rowser and the $;# thereforea!hie>ing BA aintenan!e
CP 9
8?3 we/lt Port used for !ouni!ation
/etween the $; and an BA#therefore a!hie>ing BAaintenan!e
CP 9
8088
ool for reoteupgrade
ool for reote upgrade (&&$en!ryption)
CP 9
@thers(reser
d)
Host loadingJuploading anddownloading of software and logs(i i d )
- -