BS identifier Title Committee Status Final Review Outcome BS 10:2009 Specification for flanges and bolting for pipes, valves and fittings PSE/15 Current Confirmation BS 10012:2009 Data protection. Specification for a personal information management system IDT/1 Current Confirmation BS 1016-6:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coal PTI/16 Partially replaced by Sections and subsections of BS 1016 Withdrawal BS 1016-7:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coke PTI/16 Partially replaced by Subsections of BS 1016 Withdrawal BS 1016-8:1977 Methods for analysis and testing of coal and coke -- Chlorine in coal and coke PTI/16 Partially replaced by BS 1016- 106.6.1:1997 Withdrawal BS 1098-1:1967 Specification for jig bushes -- Inch units MTE/18 The requirements for metric units in BS 1098:1967 prior to its re-numbering as BS 1098- 1:1967 have been replaced by BS 1098-2:1977 Withdrawal BS 11:1985 Specification for railway rails RAE/2 Obsolescent (2012) Revision in progress BS 1113:1999 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers) PVE/2 Obsolescent (2012); Replaced by Parts 1, 2, 3, 5, 6, 7, 10 and 11 of BS EN 12952 and has been declared obsolescent Confirmation BS 1199 and 1200:1976 Specifications for building sands from natural sources B/502 Obsolescent (2012); Replaced by BS EN 13139:2002 Confirmation BS 1210:1963 Specification for wood screws FME/9 Obsolescent (2012) Withdrawal BS 122-4:1980 Milling cutters -- Screwed shank end mills and slot drills MTE/18 Confirmed (2009) Reconfirmation BS 1339-2:2009 (CD-ROM) Humidity -- Humidity calculation functions, tables and user guide CPI/29 Current Confirmation BS 1344- 18:1981 Methods of testing vitreous enamel finishes -- Determination of fluidity behaviour: fusion flow test STI/36 Current Confirmation BS 1344-4:1968 Methods of testing vitreous enamel finishes -- Resistance to abrasion STI/36 Current Confirmation BS 1370:1979 Specification for low heat Portland cement B/516/6 Confirmed (2009) Reconfirmation BS 1438:2004 Aggregates. Single-sized aggregates for use as a medium in biological percolating filters B/502 Confirmed (2009) Reconfirmation BS 144:1997 Specification for coal tar creosote for wood preservation B/515 Confirmed (2009) Reconfirmation BS 1468:1967 Specification for tin anodes and tin salts for electroplating STI/33 Confirmed (2009) Reconfirmation BS 148:2009 Reclaimed mineral insulating oil for transformers and switchgear. Specification GEL/10 Current Confirmation BS 1553-1:1977 Specification for graphical symbols for general engineering -- Piping systems and plant TDW/4 Current Confirmation BS 1553-2:1950 Specification for graphical symbols for general engineering -- Graphical symbols for power generating plant TDW/4 Current Confirmation BS 1553-3:1950 Graphical symbols for general engineering. -- Graphical symbols for compressing plant TDW/4 Current Confirmation BS 1561:1966 Specification for silver anodes and silver salts for electroplating STI/33 Confirmed (2009) Reconfirmation BS 1571-2:1975 Specification for testing of positive displacement compressors and exhausters. -- Methods for simplified acceptance testing for air compressors and exhausters MCE/8 Confirmed (2009) Reconfirmation BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings ISE/110 Partially replaced by BS EN 10253-2:2007 Withdrawal BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings. Metric units ISE/110 Partially replaced by BS EN 10253-2:2007 Reconfirmation BS 1722- 16:2009 Fences -- Specification for powder coatings used as a plastics finish to components and mesh B/201 Current Confirmation BS 1726-2:2002 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing -- Extension springs FME/9/3 Confirmed (2009) Reconfirmation BS 1726-3:2002 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing -- Torsion springs FME/9/3 Confirmed (2009) Reconfirmation BS 1727:1987 Specification for motors for battery operated vehicles PEL/69 Confirmed (2009) Reconfirmation BS 1790:1961 Specification for length bars and their accessories (imperial units) TDW/4 Current Confirmation BS 1872:1984 Specification for electroplated coatings of tin STI/33 Confirmed (2009) Reconfirmation
26
Embed
BS identifier Title Committee Status Final Review …...BS identifier Title Committee Status Final Review Outcome BS 1902-9.2:1987 Methods of testing refractory materials. Chemical
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BS identifier Title Committee Status Final Review Outcome
BS 10:2009 Specification for flanges and bolting for pipes, valves and fittings
PSE/15 Current Confirmation
BS 10012:2009 Data protection. Specification for a personal information management system
IDT/1 Current Confirmation
BS 1016-6:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coal
PTI/16 Partially replaced by Sections and subsections of BS 1016
Withdrawal
BS 1016-7:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coke
PTI/16 Partially replaced by Subsections of BS 1016
Withdrawal
BS 1016-8:1977 Methods for analysis and testing of coal and coke -- Chlorine in coal and coke
PTI/16 Partially replaced by BS 1016-106.6.1:1997
Withdrawal
BS 1098-1:1967 Specification for jig bushes -- Inch units MTE/18 The requirements for metric units in BS 1098:1967 prior to its re-numbering as BS 1098-1:1967 have been replaced by BS 1098-2:1977
Withdrawal
BS 11:1985 Specification for railway rails RAE/2 Obsolescent (2012) Revision in progress
BS 1113:1999 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
PVE/2 Obsolescent (2012); Replaced by Parts 1, 2, 3, 5, 6, 7, 10 and 11 of BS EN 12952 and has been declared obsolescent
Confirmation
BS 1199 and 1200:1976
Specifications for building sands from natural sources
B/502 Obsolescent (2012); Replaced by BS EN 13139:2002
Confirmation
BS 1210:1963 Specification for wood screws FME/9 Obsolescent (2012) Withdrawal
BS 122-4:1980 Milling cutters -- Screwed shank end mills and slot drills
MTE/18 Confirmed (2009) Reconfirmation
BS 1339-2:2009 (CD-ROM)
Humidity -- Humidity calculation functions, tables and user guide
CPI/29 Current Confirmation
BS 1344-18:1981
Methods of testing vitreous enamel finishes -- Determination of fluidity behaviour: fusion flow test
STI/36 Current Confirmation
BS 1344-4:1968 Methods of testing vitreous enamel finishes -- Resistance to abrasion
BS 1438:2004 Aggregates. Single-sized aggregates for use as a medium in biological percolating filters
B/502 Confirmed (2009) Reconfirmation
BS 144:1997 Specification for coal tar creosote for wood preservation
B/515 Confirmed (2009) Reconfirmation
BS 1468:1967 Specification for tin anodes and tin salts for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 148:2009 Reclaimed mineral insulating oil for transformers and switchgear. Specification
GEL/10 Current Confirmation
BS 1553-1:1977 Specification for graphical symbols for general engineering -- Piping systems and plant
TDW/4 Current Confirmation
BS 1553-2:1950 Specification for graphical symbols for general engineering -- Graphical symbols for power generating plant
TDW/4 Current Confirmation
BS 1553-3:1950 Graphical symbols for general engineering. -- Graphical symbols for compressing plant
TDW/4 Current Confirmation
BS 1561:1966 Specification for silver anodes and silver salts for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 1571-2:1975 Specification for testing of positive displacement compressors and exhausters. -- Methods for simplified acceptance testing for air compressors and exhausters
MCE/8 Confirmed (2009) Reconfirmation
BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings
ISE/110 Partially replaced by BS EN 10253-2:2007
Withdrawal
BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings. Metric units
ISE/110 Partially replaced by BS EN 10253-2:2007
Reconfirmation
BS 1722-16:2009
Fences -- Specification for powder coatings used as a plastics finish to components and mesh
B/201 Current Confirmation
BS 1726-2:2002 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing -- Extension springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 1726-3:2002 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing -- Torsion springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 1727:1987 Specification for motors for battery operated vehicles
PEL/69 Confirmed (2009) Reconfirmation
BS 1790:1961 Specification for length bars and their accessories (imperial units)
TDW/4 Current Confirmation
BS 1872:1984 Specification for electroplated coatings of tin STI/33 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 1881-121:1983
Testing concrete -- Method for determination of static modulus of elasticity in compression
B/517/1 Current Confirmation
BS 1881-128:1997
Testing concrete -- Methods for analysis of fresh concrete
B/517/1 Obsolescent (2011) Withdrawal
BS 1881-204:1988
Testing concrete -- Recommendations on the use of electromagnetic covermeters
B/517/1 Current Confirmation
BS 1881-206:1986
Testing concrete -- Recommendations for determination of strain in concrete
B/517/1 Current Confirmation
BS 1881-207:1992
Testing concrete -- Recommendations for the assessment of concrete strength by near-to-surface tests
B/517/1 Current Confirmation
BS 1881-208:1996
Testing concrete -- Recommendations for the determination of the initial surface absorption of concrete
B/517/1 Current Confirmation
BS 1881-209:1990
Testing concrete -- Recommendations for the measurement of dynamic modulus of elasticity
B/517/1 Current Confirmation
BS 1892-1:1986 Gymnasium equipment -- Specification of general requirements
SW/136/22 Obsolescent (2012); Partially replaced by BS EN 913:1996
Withdrawal
BS 1892-2.11:1989
Gymnasium equipment. Particular requirements -- Specification for practice and games netting and supporting trackways
BS 1894:1992 Specification for design and manufacture of electric boilers of welded construction
PVE/2 Partially replaced by BS EN 12953-8:2001
Withdrawal
BS 1902-10.1:1993
Methods of testing refractory materials. Investment casting shell mould systems. -- Determination of resistance to deformation at elevated temperatures
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-10.2:1994
Methods of testing refractory materials. Investment casting shell mould systems -- Section 10.2: Determination of permeability and standard air flow capacity at elevated temperatures
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-4.0:1985
Methods of testing refractory materials. Properties measured under an applied stress. -- Introduction
RPI/1 Confirmed (2009) Withdrawal
BS 1902-4.6:1985
Methods of testing refractory materials. Properties measured under an applied stress -- Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.0:1992
Methods of testing refractory materials. Refractory and thermal properties -- Introduction
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.11:1986
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal spalling resistance by the prism test (method 1902-511)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.13:1984
Methods of testing refractory materials. Refractory and thermal properties -- Determination of resistance to attack by slag (method 1902-513)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.14:1992
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal expansion (temperatures up to 1500$0DC) (methods 1902-5.14)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.3:1990
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal expansion (horizontal method to 1100$0DC) (method 1902-503)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.5:1991
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.8:1992
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal conductivity (split column method) (method 1902-508)
Methods of testing refractory materials. Chemical analysis by instrumental methods -- Analysis of alumino-silicate refractories by X-ray fluorescence
RPI/1 Confirmed (2009) Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 1902-9.2:1987
Methods of testing refractory materials. Chemical analysis by instrumental methods -- Analysis of silica refractories by X-ray fluorescence
RPI/1 Confirmed (2009) Reconfirmation
BS 1916-1:2009 Limits and fits for engineering -- Guide to limits and tolerances
TDW/4/10 Current Confirmation
BS 1916-2:2009 Limits and fits for engineering -- Guide to the selection of fits in BS 1916-1
TDW/4/10 Current Confirmation
BS 1916-3:2009 Limits and fits for engineering -- Guide to tolerances, limits and fits for large diameters
TDW/4/10 Current Confirmation
BS 1983-1:1969 Specification for chucks for machine tools and portable power tools. -- Tool-holding chucks
MTE/18 Confirmed (2009) Reconfirmation
BS 2050:1978 Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material
PRI/22/-/5 Obsolescent (2012); Partially replaced by BS ISO 2878:2005
Withdrawal
BS 2062-1:1959 Specification for gear hobs -- Hobs for general purposes, 1 d.p. to 20 d.p. inclusive
MCE/5 Replaced by BS 5221:1975, until international agreement is reached on tolerances
Withdrawal
BS 2062-2:1960 Specification for gear hobs -- Hobs for gears for turbine reduction and similar drives
MCE/5 Replaced by BS 5221:1975, until international agreement is reached on tolerances
Withdrawal
BS 2087-1:1992 Preservative textile treatments. -- Specification for treatments
TCI/80 Obsolescent (2011) Withdrawal
BS 2087-2:1992 Preservative textile treatments. -- Methods of test
TCI/80 Obsolescent (2011) Withdrawal
BS 2468-3:1995 Glossary of terms and classification relating to agricultural machinery and implements -- Soil working equipment
AGE/32 Confirmed (2006) Reconfirmation
BS 2482:2009 Specification for timber scaffold boards B/514/42 Current Confirmation
BS 2523:1966 Specification for lead-based priming paints STI/21 Obsolescent (2012); Partially replaced by BS 5082:1974 and BS 5358:1976
Withdrawal
BS 2538:1954 Specification for air-cooled flameproof single-phase lighting transformer units supplied from high voltage systems
MRE/3 Obsolescent (2011) Withdrawal
BS 2571:1990 Specification for general-purpose flexible PVC compounds for moulding and extrusion
PRI/82 Confirmed (2009) Reconfirmation
BS 2572:1990 Specification for phenolic laminated sheet and epoxy cotton fabric laminated sheet
GEL/15/6 Partially replaced by BS EN 60893-3-4:1995
Withdrawal
BS 2573-1:1983 Rules for the design of cranes -- Specification for classification, stress calculations and design criteria for structures
MHE/3/1 Replaced by BS EN 13001-1:2004+A1:2009, BS EN 13001-2:2004+A3:2009, DD CEN/TS 13001-3.1:2004 and DD CEN/TS 13001-3-2:2004 until part 3-3 of the series is published. Together with BS 2573-2:1980, replaced by BS EN 13001-1:2004+A1:2009, BS EN 13001-2:2011,
Reconfirmation
BS 2574-1:1991 Lower limb orthoses. -- Guide to the design and manufacture of lower limb orthoses, excluding foot orthoses
CH/168 Confirmed (2009) Reconfirmation
BS 2574-2:1994 Lower limb orthoses. -- Specification for hip, knee and ankle joints for lower limb orthoses
CH/168 Confirmed (2009) Reconfirmation
BS 2606:1955 Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak
CH/62/2 Obsolescent (2012) Withdrawal
BS 2621-5:1979 Specifications for glycerol CII/26 Confirmed (2009) Withdrawal
BS 2655-1:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for electric, hydraulic and hand-powered lifts
MHE/4 Obsolescent (2012); Partially replaced by Parts 1, 2, 3 and 14 of BS 5655
Reconfirmation
BS 2655-10:1972
Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for guarding
MHE/4 Obsolescent (2012); Partially replaced by BS 5655-1:1979, BS 5655:Part 6:1985 and BS 5656:1983
Withdrawal
BS 2655-4:1969 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for escalators and passenger conveyors
MHE/4 Obsolescent (2012); Replaced by BS 5656:1983 due to existing approvals. Please see full details given in AMD 4421
Withdrawal
BS 2655-5:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for paternosters
MHE/4 Obsolescent (2012) Withdrawal
BS 2655-6:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- Building construction requirements
MHE/4 Obsolescent (2012); Partially replaced by Parts 1, 2, 3 and 14 of BS 5655
Withdrawal
BS 2655-7:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- Testing and inspection
MHE/4 Obsolescent (2012); Partially replaced by BS 5655-1:1979 and BS 5655-10:1986
Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 2655-8:1971 Specification for lifts, escalators, passenger conveyors and paternosters -- Modernization or reconstruction of lifts, escalators and paternosters
MHE/4 Obsolescent (2012); Partially replaced by Parts 1, 11 and 12 of BS 5655
Withdrawal
BS 2655-9:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- Definitions
MHE/4 Obsolescent (2012) Withdrawal
BS 2657:1974 Specification for fluoroboric acid and metal fluoroborates for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 2742:2009 Use of the Ringelmann and miniature smoke charts
EH/2/1 Current Confirmation
BS 2782-11:Method 1108A:1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves -- True impact rate (TIR) boundaries of pipes
PRI/88 Confirmed (2009) Reconfirmation
BS 2782-11:Method 1109A:1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves -- Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
PRI/88 Confirmed (2009) Reconfirmation
BS 2782-4:Method 434B:1977
Methods of testing plastics. Chemical properties -- Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract
PRI/21 Obsolescent (2012) Withdrawal
BS 2782-5:Method 540C:1988
Methods of testing plastics. Optical and colour properties, weathering. -- Determination of ultraviolet radiation intensity using polysulphone film
PRI/21 Obsolescent (2012) Withdrawal
BS 2790:1992 Specification for design and manufacture of shell boilers of welded construction
PVE/2 BS 2790:1992 remains a current standard and will be withdrawn upon publication of all parts of BS EN 12953
Confirmation
BS 2858:1957 Specification for steel plates for use in the manufacture of galvanizing pots
ISE/105 Obsolescent (2011) Withdrawal
BS 2868:1968 Specification for cadmium anodes and cadmium oxide for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 2972:1989 Methods of test for inorganic thermal insulating materials
B/540 Partially replaced by BS EN 13467 to BS EN 13472:2001
Withdrawal
BS 2B 100:2009 Procedure for inspection, testing and acceptance of wrought copper alloys
ACE/61 Current Confirmation
BS 2B 23:2009 Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock and forgings
ACE/61/-/16 Current Confirmation
BS 2B 24:2009 Specification for copper-tin-phosphorous alloy rods and sections
ACE/61/-/16 Current Confirmation
BS 2G 111:1955 Specification for rate of climb indicators for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 114:1953 Specification for direct current ratiometer indicators for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 115:1956 Specification for sensitive altimeters for aircraft ACE/1 Confirmed (2009) Reconfirmation
BS 2G 117:1975 Specification for pressure-driven airspeed indicators
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 124-1:1966
Specification for a.c. generators for aircraft -- Constant frequency
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 124-2:1966
Specification for a.c. generators for aircraft -- Variable frequency
BS 2G 135:1967 Specification for electrically-heated pitot and pitotstatic pressure heads
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 143:1965 Specification for a.c. and d.c. rotary and linear actuators for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 146:1966 Specification for d.c. motors for aircraft ACE/1 Confirmed (2009) Reconfirmation
BS 2G 147-1:1966
Specification for a.c. motors for aircraft -- Three-phase constant frequency squirrel-cage induction motors
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 147-2:1966
Specification for a.c. motors for aircraft -- Three-phase variable frequency squirrel-cage induction motors
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 182:1975 Specification for pressure-driven machmeters for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 199:1984 Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 239:1992 Specification for primary active lithium batteries for use in aircraft
ACE/6 Confirmed (2009) Reconfirmation
BS 2HC 203:1989
Specification for nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 13.0, Al 6.0, Mo 4.5, Nb 2.3)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 2HC 204:1989
Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 207:1989
Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 208:1989
Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalum alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 209:1989
Specification for low carbon, precipitation hardening nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 11.5, Al 6.0, Mo 4.0, Nb 2.0)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 210:1989
Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 211:1989
Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HR 203:2009
Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4)
ACE/61/-/48 Current Confirmation
BS 2HR 204:2009
Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
ACE/61/-/48 Current Confirmation
BS 2HR 205:2009
Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31)
ACE/61/-/48 Current Confirmation
BS 2HR 206:2009
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
ACE/61/-/48 Current Confirmation
BS 2HR 207:2009
Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
ACE/61/-/48 Current Confirmation
BS 2HR 208:2009
Specification for nickel-chromium-iron alloy plate, sheet and strip: annealed (nickel base, Cr 15.5, Fe 8)
ACE/61/-/48 Current Confirmation
BS 2L 128:1970 Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS 2L 95:1971 Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
ACE/61/-/24 Replaced by BS EN 2126:1992 Withdrawal
BS 2L 99:1972 Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS 2PL 1:1966 Specification for phenolic mouldings for aeronautical purposes
ACE/65 Obsolescent (2012) Withdrawal
BS 2S 129:1976 Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 130:1976 Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 131:1977 Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 135:1977 Specification for 1% carbon-chromium steel billets, bars, forgings and parts (limiting ruling section 25 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 142:1977 Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 143:1976 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (930-1080 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 2S 146:1976 Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 147:1976 Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 149:1976 Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 203:2004 Carbon steel wire rod, wire and springs. High duty unground wire. Hardened and tempered. Specification
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 204:2004 Chromium-vanadium steel wire rod, wire and springs. High duty ground wire. Hardened and tempered. Specification
BS 2S 515:1969 Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding)
ACE/61/-/15 Confirmed (2007) Revision in progress
BS 2SP 105:1955
Specification for swaged cable-end assemblies (Unified threads) for preformed steel wire rope (W.9) for aircraft
ACE/12 Obsolescent (2012) Reconfirmation
BS 2SP 106:1955
Specification for swaged cable-end assemblies (Unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft
ACE/12 Confirmed (2006) Reconfirmation
BS 2TA 38:2009 Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 39:2009 Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 40:2009 Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 41:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 42:2009 Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 45:2009 Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 46:2009 Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 47:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 49:2009 Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 50:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 52:2009 Specification for sheet and strip of titanium- copper alloy (tensile strength 690-920 MPa)
ACE/61/-/49 Current Confirmation
BS 2TA 56:2009 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
ACE/61/-/49 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 2TA 57:2009 Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 58:2009 Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 59:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)
ACE/61/-/49 Current Confirmation
BS 2V 35:1966 Specification for plywood for aeronautical purposes
ACE/65 Obsolescent (2012) Withdrawal
BS 2V 37:1968 Specification for Sitka spruce as finished timber ACE/65 Obsolescent (2012) Withdrawal
BS 2X 32:1998 Specification for pre-treatment etch primer for aerospace purposes
ACE/65/-/3 Confirmed (2009) Reconfirmation
BS 2X 33:1998 Specification for two component epoxy primer for aerospace purposes
ACE/65/-/3 Confirmed (2009) Reconfirmation
BS 2X 34:1998 Specification for two component polyurethane finish for aerospace purposes
BS 3506:1969 Specification for unplasticized PVC pipe for industrial uses
PRI/88 Confirmed (2009) Reconfirmation
BS 3597:1984 Specification for electroplated coatings of 65/35 tin/nickel alloy
STI/33 Confirmed (2009) Reconfirmation
BS 3655:1981+A1:2009
Recommendations for informative labelling of textile floor coverings
PRI/3 Current Confirmation
BS 3730-2:1982 Assessment of departures from roundness. -- Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration)
TDW/4 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 3730-3:1982 Assessment of departures from roundness. -- Methods for determining departures from roundness using two- and three-point measurement
TDW/4 Current Confirmation
BS 3762-3.9:1986
Analysis of formulated detergents -- Method for determination of soap content
CII/34 Confirmed (2009) Reconfirmation
BS 3777:1964 Specification for screw thread measuring cylinders
TDW/4 Replaced by BS 5590:1978 Withdrawal
BS 3783:1964 Specification for X-ray lead-rubber protective aprons for personal use
CH/62/2 Obsolescent (2012) Withdrawal
BS 3813-1:1964 Specification for incinerators for waste from trade and residential premises -- Capacities between 50 lb/h and 1000 lb/h
B/508/1 Obsolescent (2011) Withdrawal
BS 3818:1964 Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
RAE/1 Current Confirmation
BS 3837-1:2004 Expanded polystyrene boards -- Boards and blocks manufactured from expandable beads. Requirements and test methods
PRI/72 Confirmed (2009) Withdrawal
BS 3858:1992 Specification for binding and identification sleeves for use on electric cables and wires
GEL/15 Confirmed (2009) Reconfirmation
BS 3880-3:1971 Specification for paper tape for data processing. -- Representation of codes on paper tape
ICT/-/1 Obsolescent (2011) Withdrawal
BS 3900-B3:1983
Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films -- Determination of 'soluble' lead in the solid matter in liquid paints: method for use in conjunction with The Control of Lead at Work Regulations, 1980 (S.I. 1980 No. 1248)
STI/10 Obsolescent (2012) Withdrawal
BS 3919:1987 Specification for technical tallow and animal grease
AW/307 Confirmed (2009) Reconfirmation
BS 3928:1969 Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors)
GEL/15/6 Partially replaced by BS EN 60893-2:1995, BS EN 60893-3-3:1995, BS EN 60893-3-6:1995 and BS EN 60893-3-7:1995
Withdrawal
BS 3970-1:1990 Sterilizing and disinfecting equipment for medical products -- Specification for general requirements
LBI/35 Obsolescent (2012); Partially replaced by BS EN 285:1997, BS EN 1422:1997+A1:2009 and BS EN 61010-2-043:1998
Reconfirmation
BS 3B 25:2009 Specification for copper-nickel-silicon alloy rods, bars, sections, forging stock and forgings (heat treated)
ACE/61/-/16 Current Confirmation
BS 3B 26:2009 Specification for copper-nickel-silicon alloy rods, bars and sections (solution treated, cold worked and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 27:2009 Specification for copper-zinc-aluminium-nickel-silicon alloy tube
ACE/61/-/16 Current Revision in progress
BS 3B 28:2009 Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 29:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 30:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 31:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 32:2009 Specification for copper-beryllium alloy rods, bars and sections (solution treated and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 33:2009 Specification for copper-beryllium alloy wire(solution treated and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3F 129:2003 Woven polyester narrow fabrics for aerospace purposes
ACE/65 Confirmed (2009) Reconfirmation
BS 3G 101:1987 Specification for general requirements for mechanical and electromechanical aircraft indicators
ACE/1 Confirmed (2009) Reconfirmation
BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 3G 231:1997 Specification for conductors for general-purpose aircraft electrical cables and aerospace applications
ACE/6 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 3HR 201:2009
Specification for nickel-chromium- titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
ACE/61/-/48 Current Confirmation
BS 3HR 202:2009
Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
ACE/61/-/48 Current Confirmation
BS 3J 12:1991 Specification for pressure-sensitive adhesive identification tape
ACE/1 Confirmed (2009) Reconfirmation
BS 3L 122:1970 Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS 3S 102:1969 Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 3S 132:1976 Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 3S 144:1995 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 3S 145:1996 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 3SP 3:1943 Specification for aircraft material. Fork joints (low tensile type) (for sizes No. 4 B.A. to $9H inch B.S.F. inclusive)
ACE/12 Obsolescent (2012) Reconfirmation
BS 3TA 1:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 10:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 100:2009
Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys
ACE/61 Current Confirmation
BS 3TA 11:2009 Specification for bar and section for machining of titanium-aluminium -vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
ACE/61/-/49 Partially replaced by BS EN 3355:2012
Withdrawal
BS 3TA 2:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 21:2009 Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 28:2009 Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm)
ACE/61/-/49 Current Confirmation
BS 3TA 6:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 7:2009 Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 MPa)
BS identifier Title Committee Status Final Review Outcome
BS 4272-1:1968 Anaesthetic and analgesic machines -- Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers
CH/121/1 Current Confirmation
BS 4285-3.11:1985
Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms -- Detection and enumeration of faecal streptococci
AW/9 Confirmed (2005) Reconfirmation
BS 4285-5.2:1989
Microbiological examination for dairy purposes. Ancillary methods -- Methylene blue reduction test for cream and ice cream
AW/9 Obsolescent (2011) Withdrawal
BS 4289-5:1989 Method for the analysis of oilseeds. -- Determination of acidity of fat
AW/307 Confirmed (2009) Reconfirmation
BS 4290:1989 Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes
STI/33 Confirmed (2009) Reconfirmation
BS 4292-2:1989 Method for specifying electroplated coatings of gold and gold alloys -- Gold and gold alloys for decorative and protective purposes
STI/33 Confirmed (2009) Reconfirmation
BS 4311-1:2007 Gauge blocks manufactured to imperial specification -- Specification and validation
TDW/4 Current Confirmation
BS 4311-2:2009 Gauge blocks manufactured to imperial specification -- Accessories
TDW/4 Current Confirmation
BS 4325-1:1978 Methods for analysis of oilseed residues -- Determination of moisture and volatile matter content
AW/307 Confirmed (2009) Reconfirmation
BS 4325-2:1978 Methods for analysis of oilseed residues -- Determination of total ash
AW/307 Confirmed (2009) Reconfirmation
BS 4325-5:1978 Methods for analysis of oilseed residues -- Determination of diethyl ether extract
AW/307 Confirmed (2009) Reconfirmation
BS 4370-2:1993 Methods of test for rigid cellular materials -- Methods 7 to 9
PRI/24 Partially replaced by BS EN ISO 4590:1995 and BS ISO 1922:2001. Was withdrawn but has been reinstated
Withdrawal
BS 4376:1982 Specification for electrically operated blood storage refrigerators
RHE/19 Partially replaced by BS 4376-1:1991
Withdrawal
BS 4395-1:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering -- General grade
FME/9 Replaced by BS EN 14399-1:2005, BS EN 14399-2:2005, BS EN 14399-3:2005, BS EN 14399-4:2005, BS EN 14399-5:2005, BS EN 14399-6:2005, BS EN 14399-7:2007, BS EN 14399-8:2007 and BS EN 14399-10:2009
Withdrawal
BS 4395-2:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering -- Higher grade bolts and nuts and general grade washers
FME/9 Replaced by BS EN 14399-1:2005, BS EN 14399-2:2005, BS EN 14399-3:2005, BS EN 14399-4:2005, BS EN 14399-5:2005, BS EN 14399-6:2005, BS EN 14399-7:2007, BS EN 14399-8:2007 and BS EN 14399-10:2009
Withdrawal
BS 4407:1988 Methods for quantitative analysis of fibre mixtures
TCI/80 Replaced by Parts of BS EN ISO 1833
Withdrawal
BS 4427-2:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Measurement of pH value of sodium tripolyphosphate
CII/34 Current Confirmation
BS 4449:2005+A2:2009
Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification
ISE/104 Current Confirmation
BS 4465:1989 Specification for design and construction of electric hoists for both passengers and materials
BS 4481-2:1983 Bonded abrasive products -- Specification for dimensions of grinding wheels and segments
MTE/13 Current Confirmation
BS 4493:1969 Specification for copper salts for electroplating STI/33 Confirmed (2009) Reconfirmation
BS 4500:2009 Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
TDW/4/10 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 4550-3.4:1978
Methods of testing cement. Physical tests -- Strength tests
B/516/12 Replaced by BS EN 196-1:1995 as it is quoted in other standards. Partially replaced by BS 1881-131:1998
Withdrawal
BS 4550-3.8:1978
Methods of testing cement. Physical tests -- Test for heat of hydration
B/516/12 Confirmed (2009) Reconfirmation
BS 4552-1:1979 Fuel filters, strainers and sedimentors for compression-ignition engines. -- Methods of test
MCE/21 Confirmed (2009) Reconfirmation
BS 4570:1985 Specification for fusion welding of steel castings WEE/-/1 Obsolescent (2011) Withdrawal
BS 4660:2000 Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage
PRI/88/1 Confirmed (2007); Partially replaced by BS EN 13598-1:2010
Reconfirmation
BS 4662:2006+A1:2009
Boxes for flush mounting of electrical accessories. Requirements, test methods and dimensions
PEL/23 Current Reconfirmation
BS 4682-2:1988 Methods of test for dimensional stability of textile floor coverings -- Determination of dimensional changes due to changes in ambient humidity
PRI/3 Confirmed (2009) Reconfirmation
BS 4682-3:1981 Methods of test for dimensional stability of textile floor coverings -- Determination of dimensional changes after exposure to heat
PRI/3 Confirmed (2009) Withdrawal
BS 4682-4:1981 Methods of test for dimensional stability of textile floor coverings -- Determination of dimensional changes after immersion in water
PRI/3 Confirmed (2009) Withdrawal
BS 4727-2:Group 02:1983
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering -- Power electronics terminology
GEL/1 Confirmed (2009) Reconfirmation
BS 4727-3:Group 07:1971
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics -- Radiocommunication terminology
GEL/1 Confirmed (2009) Reconfirmation
BS 4737-3.0:1988
Intruder alarm systems. Specifications for components -- General requirements
GW/1 Current Confirmation
BS 4783-1:1988 Storage, transportation and maintenance of media for use in data processing and information storage. -- Recommendations for disk packs, storage modules and disk cartridges
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4783-2:1988 Storage, transportation and maintenance of media for use in data processing and information storage -- Recommendations for magnetic tape on open spools
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4783-3:1988 Storage, transportation and maintenance of media for use in data processing and information storage -- Recommendations for flexible disk cartridges
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4783-4:1988 Storage, transportation and maintenance of media for use in data processing and information storage. -- Recommendations for magnetic tape cartridges and cassettes
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4790:1987 Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
PRI/3 Confirmed (2009) Reconfirmation
BS 4805:1989 Method for determination of the dimensions of rectangular textile floor coverings
PRI/3 Confirmed (2009) Withdrawal
BS 4808-1:1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. -- General requirements and tests
EPL/46 Obsolescent (2011) Withdrawal
BS 4808-2:1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. -- Equipment wires with solid or stranded conductors, unscreened, single
EPL/46 Obsolescent (2011) Withdrawal
BS 4822:1994 Specification for keyboard allocation of graphic characters for data processing
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4825-2:1991+A2:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for bends and tees
ISE/110 Confirmed (2007) Reconfirmation
BS 4825-3:1991+A2:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for clamp type couplings
ISE/110 Current Reconfirmation
BS 4825-4:1991+A1:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for threaded (IDF type) coupling
ISE/110 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 4825-5:1991+A1:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for recessed ring joint type couplings
ISE/110 Current Confirmation
BS 4841-1:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications -- Specification for laminated insulation boards with auto-adhesively or separately bonded facings
PRI/72/4 Current Confirmation
BS 4841-3:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications -- Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes
PRI/72/4 Current Confirmation
BS 4841-4:2006 Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications -- Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes
PRI/72/4 Current Confirmation
BS 4841-6:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications -- Specification for laminated boards with auto-adhesively or separately bonded facings for use as thermal insulation for floors
PRI/72/4 Current Confirmation
BS 4873:2009 Aluminium alloy windows and doorsets. Specification
B/538/1 Current Confirmation
BS 4962:1989 Specification for plastics pipes and fittings for use as subsoil field drains
PRI/88 Confirmed (2009) Reconfirmation
BS 4991:1974 Specification for propylene copolymer pressure pipe
PRI/88 Confirmed (2009) Reconfirmation
BS 4996:1973 Specification for line traps for power line carrier systems
PEL/57 Confirmed (2009) Reconfirmation
BS 4A 100:2003 Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
ACE/12 Confirmed (2009) Reconfirmation
BS 4A 4:1966 Test pieces and test methods for metallic materials for aircraft. Metric units
ACE/61/-/6 Confirmed (2009); Partially replaced by BS 18:1987
Withdrawal
BS 4S 106:1976 Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 5045-6:1987 Transportable gas containers -- Specification for seamless containers of less than 0.5 litre water capacity
PVE/3/3 Confirmed (2009); Partially replaced by BS EN 13293:2002
Confirmation
BS 5051-1:1988 Bullet-resistant glazing -- Specification for glazing for interior use
B/520/3 Obsolescent (2012); Replaced by BS EN 1063:2000
Withdrawal
BS 5070-1:1988 Engineering diagram drawing practice -- Recommendations for general principles
TDW/4 Partially replaced by BS EN 61082-1:1993 which has since been superseded
Confirmation
BS 5070-3:1988 Engineering diagram drawing practice -- Recommendations for mechanical/fluid flow diagrams
TDW/4 Current Confirmation
BS 5070-4:1990 Engineering diagram drawing practice -- Recommendations for logic diagrams
TDW/4 Current Confirmation
BS 5079:1981 Specification for information interchange on 3.81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)
ICT/-/1 Obsolescent (2011) Withdrawal
BS 5099:2004 Electric cables. Voltage levels for spark testing GEL/20/17 Confirmed (2009) Reconfirmation
BS 5136:1981 Specification for toothpastes CH/106/7 Partially replaced by BS EN ISO 11609:1998
Withdrawal
BS 5154:1991 Specification for copper alloy globe, globe stop and check, check and gate valves
PSE/18/2 Partially replaced by BS EN 12288:2003
Confirmation
BS 5163-1:2004 Valves for waterworks purposes -- Predominantly key-operated cast iron gate valves. Code of practice
PSE/18/3 Confirmed (2009) Reconfirmation
BS 5163-2:2004 Valves for waterworks purposes -- Stem caps for use on isolating valves and associated water control apparatus. Specification
PSE/18/2 Confirmed (2009) Reconfirmation
BS 519:1950 Specification for tractive armature direct current neutral-polar line relays for railway signalling
GEL/9 Obsolescent (2012) Withdrawal
BS 5229:1975 Method for determination of tuft withdrawal force of carpets
PRI/3 Confirmed (2009) Withdrawal
BS 5234-1:1992 Partitions (including matching linings) -- Code of practice for design and installation
B/544 Confirmed (2007) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 5234-2:1992 Partitions (including matching linings) -- Specification for performance requirements for strength and robustness including methods of test
B/544 Confirmed (2007) Reconfirmation
BS 5241-1:1994 Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site -- Specification for sprayed foam thermal insulation applied externally
PRI/72 Confirmed (2009) Reconfirmation
BS 5255:1989 Specification for thermoplastics waste pipe and fittings
PRI/88 Confirmed (2009); Partially replaced by BS EN 1329-1:2000, BS EN 1455-1:2000, BS EN 1519-1:2000, BS EN 1565-1:2000 and BS EN 1566-1:2000
Withdrawal
BS 5258-1:1986 Safety of domestic gas appliances -- Specification for central heating boilers and circulators
GSE/29 Obsolescent (2011) Withdrawal
BS 5258-15:1990
Safety of domestic gas appliances -- Specification for combination boilers
GSE/29 Obsolescent (2011) Withdrawal
BS 5287:1988 Specification for assessment and labelling of textile floor coverings tested to BS 4790
PRI/3 Confirmed (2009) Reconfirmation
BS 5306-3:2009 Fire extinguishing installations and equipment on premises -- Commissioning and maintenance of portable fire extinguishers. Code of practice
BS 5315:1991 Hose clamps (worm drive type) for general purpose use (metric series)
PSE/6 Confirmed (2009) Reconfirmation
BS 5325:2001 Installation of textile floor coverings. Code of practice
PRI/3 Confirmed (2009)
BS 5341-5:1976 Piston rings up to 200 mm diameter for reciprocating internal combustion engines -- Ring grooves
MCE/14 Confirmed (2009) Reconfirmation
BS 5343-2:1991 Gas detector tubes -- Specification for long term gas detector tubes
EH/2/2 Obsolescent (2011) Withdrawal
BS 5350-B9:1984
Methods of test for adhesives. Adhesives -- Determination of resistance to sagging (flow after application)
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-C5:2002
Methods of test for adhesives -- Determination of bond strength in longitudinal shear for rigid adherends
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H1:1981
Methods of test for adhesives. -- Determination of heat stability of hot melt adhesives in the application equipment
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H2:1982
Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of low temperature flexibility or cold crack temperature
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H3:1984
Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of heat resistance of hot-melt adhesives
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H4:1984
Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of maximum open time of hot-melt adhesives (oven method)
PRI/52 Confirmed (2009) Reconfirmation
BS 5385-1:2009 Wall and floor tiling -- Design and installation of ceramic, natural stone and mosaic wall tiling in normal internal conditions. Code of practice
B/539 Current Confirmation
BS 5385-4:2009 Wall and floor tiling -- Design and installation of ceramic and mosaic tiling in special conditions. Code of practice
B/539 Current Revision in progress
BS 5385-5:2009 Wall and floor tiling -- Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice
B/539 Current Confirmation
BS 5395-3:1985 Stairs, ladders and walkways -- Code of practice for the design of industrial type stairs, permanent ladders and walkways
B/208 Partially replaced by Parts 1 to 4 of BS EN ISO 14122 and BS 4592-0:2006+A1:2012
Withdrawal
BS 542:1973 Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries
MRE/3 Obsolescent (2011) Withdrawal
BS 5422:2009 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40$0DC to +700$0DC
B/540/7 Current Confirmation
BS 5440-2:2009 Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) -- Specification for the installation and maintenance of ventilation provision for gas appliances
GSE/30/-/15 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 5446-3:2005 Fire detection and fire alarm devices for dwellings -- Specification for smoke alarm kits for deaf and hard of hearing people
FSH/12/2 Obsolescent (2012) Revision in progress
BS 5467:1997+A3:2008
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
GEL/20/17 Confirmed (2009) Reconfirmation
BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion
B/209 Partially replaced by Parts 1 to 8 of BS EN ISO 12944 and BS EN ISO 14713:1999
Withdrawal
BS 5502-0:1992 Buildings and structures for agriculture -- Introduction
B/549 Confirmed (2009) Reconfirmation
BS 5502-20:1990
Buildings and structures for agriculture -- Code of practice for general design considerations
B/549 Confirmed (2009) Reconfirmation
BS 5502-21:1990
Buildings and structures for agriculture -- Code of practice for selection and use of construction materials
B/549 Confirmed (2009) Reconfirmation
BS 5502-23:2004
Buildings and structures for agriculture -- Fire precautions. Code of practice
B/549 Confirmed (2009) Reconfirmation
BS 5502-25:1991
Buildings and structures for agriculture -- Code of practice for design and installation of services and facilities
B/549 Confirmed (2009) Reconfirmation
BS 5502-30:1992
Buildings and structures for agriculture -- Code of practice for control of infestation
B/549 Confirmed (2009) Reconfirmation
BS 5502-32:1990
Buildings and structures for agriculture -- Guide to noise attenuation
B/549 Confirmed (2009) Reconfirmation
BS 5502-33:1991
Buildings and structures for agriculture -- Guide to the control of odour pollution
B/549 Confirmed (2009) Reconfirmation
BS 5502-41:1990
Buildings and structures for agriculture -- Code of practice for design and construction of sheep buildings and pens
B/549 Confirmed (2009) Reconfirmation
BS 5502-42:1990
Buildings and structures for agriculture -- Code of practice for design and construction of pig buildings
B/549 Confirmed (2009) Reconfirmation
BS 5502-43:1990
Buildings and structures for agriculture -- Code of practice for design and construction of poultry buildings
B/549 Confirmed (2009) Reconfirmation
BS 5502-49:1990
Buildings and structures for agriculture -- Code of practice for design and construction of milking premises
B/549 Confirmed (2009) Reconfirmation
BS 5502-51:1991
Buildings and structures for agriculture -- Code of practice for design and construction of slatted, perforated and mesh floors for livestock
B/549 Confirmed (2009) Reconfirmation
BS 5502-52:1991
Buildings and structures for agriculture -- Code of practice for design of alarm systems, emergency ventilation and smoke ventilation for livestock housing
B/549 Confirmed (2009) Reconfirmation
BS 5502-60:1992
Buildings and structures for agriculture -- Code of practice for design and construction of buildings for mushrooms
B/549 Confirmed (2009) Reconfirmation
BS 5502-65:1992
Buildings and structures for agriculture -- Code of practice for design and construction of crop processing buildings
B/549 Confirmed (2009) Reconfirmation
BS 5502-66:1992
Buildings and structures for agriculture -- Code of practice for design and construction of chitting houses
B/549 Confirmed (2009) Reconfirmation
BS 5502-70:1992
Buildings and structures for agriculture -- Code of practice for design and construction of ventilated on floor stores for combinable crops
B/549 Confirmed (2009) Reconfirmation
BS 5502-71:1992
Buildings and structures for agriculture -- Code of practice for design and construction of ventilated stores for potatoes and onions
B/549 Confirmed (2009) Reconfirmation
BS 5502-72:1992
Buildings and structures for agriculture -- Code of practice for design and construction of controlled environment stores for vegetables, fruit and flowers
B/549 Confirmed (2009) Reconfirmation
BS 5502-74:1991
Buildings and structures for agriculture -- Code of practice for design and construction of bins and silos for combinable crops
B/549 Confirmed (2009) Reconfirmation
BS 5502-75:1993
Buildings and structures for agriculture -- Code of practice for the design and construction of forage stores
B/549 Confirmed (2009) Reconfirmation
BS 5502-80:1990
Buildings and structures for agriculture -- Code of practice for design and construction of workshops, maintenance and inspection facilities
B/549 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 5502-81:1989
Buildings and structures for agriculture -- Code of practice for design and construction of chemical stores
B/549 Confirmed (2009) Reconfirmation
BS 5502-82:1997
Buildings and structures for agriculture -- Code of practice for design of amenity buildings
B/549 Confirmed (2009) Reconfirmation
BS 5516-1:2004 Patent glazing and sloping glazing for buildings -- Code of practice for design and installation of sloping and vertical patent glazing
B/520/5 Current Confirmation
BS 5516-2:2004 Patent glazing and sloping glazing for buildings -- Code of practice for sloping glazing
B/520/5 Current Confirmation
BS 5540-3:1978 Specification for evaluating particulate contamination of hydraulic fluids. -- Methods of bottling fluid samples
MCE/18 Confirmed (2009) Reconfirmation
BS 5544:1978 Specification for anti-bandit glazing (glazing resistant to manual attack)
B/520/3 Obsolescent (2012); Replaced by BS EN 356:2000 for the testing and classification of glass and glass/plastics composites but remains available for the testing and classification of plastics glazing sheet materials until a corresponding British Standard is
Withdrawal
BS 5550-1.3.3:1980
Cinematography. 8 mm film. Camera usage -- Specification for claw-to-gate distance in 8 mm Type R spool-loading cinematograph equipment
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-2.12.1:1993
Cinematography. 16 mm film. Miscellaneous. -- Specification for test film for assessing the picture performance of 16 mm motion-picture projectors
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-2.7.2:1982
Cinematography. 16 mm film. Projection. -- Specification for the performance of 16 mm sound-film projectors
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-2.9.3:1980
Cinematography. 16 mm film. Projector spools. -- Specification for 16 mm film spools of 732 m capacity (43 cm size) for specialized equipment
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.1.2:1978
Cinematography. 35 mm film. Raw stock -- Specification for the dimensional features of magnetic coatings on 35 mm perforated film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.10.1:1980
Cinematography. 35 mm film. Sprockets -- Specification for broad tooth sprockets for 35 mm perforated film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.10.2:1980
Cinematography. 35 mm film. Sprockets -- Specification for universal sprockets for 35 mm perforated film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.12.1:1979
Cinematography. 35 mm film. Miscellaneous. -- Specification for metal cans for processed 35 mm motion-picture film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.4.8:1986
Cinematography. 35 mm film. Sound. -- Specification for the lateral positions and width dimensions of two-track negative photographic sound records on 35 mm motion-picture film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.9.1:1980
Cinematography. 35 mm film. Projector spools -- Specification for 35 mm film spools of 610 m capacity (38 cm size) for release prints
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-7.1.1:1980
Cinematography. Production and presentation. Light sources and lighting. -- Specification for exciter lamps
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-7.2.5:1980
Cinematography. Production and presentation. Screens and screen luminance. -- Specification for cinematograph screens
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-7.5.4:1981
Cinematography. Production and presentation. Film and television location lighting. -- Specification for single pole high current plugs and socket connectors
CPW/4 Obsolescent (2011) Withdrawal
BS 558 and 564:1970
Specifications for nickel anodes, anode nickel and nickel salts for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 559:2009 Specification for the design and construction of signs for publicity, decorative and general purposes
CPL/34/11 Current Confirmation
BS 5608:1993 Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment
PRI/72 Confirmed (2009) Reconfirmation
BS 561:1951 Specification for alternating-current line relays double-element 3-position (for railway signalling)
GEL/9 Obsolescent (2012) Withdrawal
BS 5655-13:1995
Lifts and service lifts -- Recommendations for vandal resistant lifts
MHE/4 Obsolescent (2012); Replaced by BS EN 81-71
Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 5655-7:1983 Lifts and service lifts -- Specification for manual control devices, indicators and additional fittings
MHE/4 Obsolescent (2012); Withdrawal
BS 5655-9:1985 Lifts and service lifts -- Specification for guide rails
MHE/4 Obsolescent (2012); Withdrawal
BS 5658:1979 Specification for gold potassium cyanide for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 5707:1997 Specification for preparations of wood preservatives in organic solvents
B/515 Confirmed (2009) Reconfirmation
BS 5713:1979 Specification for hermetically sealed flat double glazing units
B/520/2 Obsolescent (2011) Withdrawal
BS 5744:1979 Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes, container handling cranes and rail-mounted low carriage cranes)
MHE/3/11 Partially replaced by Parts 1 to 3 of BS 7121. When all parts of BS 7121 have been published BS 5744 will be revised to cover manually operated and light cranes only
Withdrawal
BS 5832:1980 Specification for compacted waste containers for lift-off vehicles
B/508/1 Obsolescent (2011) Withdrawal
BS 5834-1:2009 Surface boxes, guards and underground chambers for the purposes of utilities -- Specification for guards and plinths
Railway rolling stock materials -- Specification for axles for traction and trailing stock
RAE/3 Current Confirmation
BS 5920:1980 Method for determination of dimensions of textile floor covering test specimens
PRI/3 Confirmed (2009) Reconfirmation
BS 5921:1980 Methods for determination of size, squareness and straightness of edge of textile floor covering tiles
PRI/3 Confirmed (2009) Reconfirmation
BS 5931:1980 Code of practice for machine laid in situ edge details for paved areas
B/507 Confirmed (2009) Reconfirmation
BS 5955-8:2001 Plastics pipework (thermoplastics materials) -- Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
PRI/88/2 Current Confirmation
BS 5958-2:1991 Code of practice for control of undesirable static electricity -- Recommendations for particular industrial situations
BS 5S 82:1976 Specification. 4% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1320-1520 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 5S 99:1994 Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 600:2000 A guide to the application of statistical methods to quality and standardization
SS/3 Current Confirmation
BS 6031:2009 Code of practice for earthworks B/526 Current Confirmation
BS 6101-1:1981 Machine tool ball screws. -- Methods of calculating dynamic and static load and life ratings
MTE/1 Current Reconfirmation
BS 6102-16:1997
Cycles -- Specification for replacement brake blocks
GME/25 Confirmed (2009) Reconfirmation
BS 6117:1981 Specification for glass bottles for light wine PKW/0 Obsolescent (2011) Withdrawal
BS 6137:1982 Specification for electroplated coatings of tin/lead alloys
STI/33 Confirmed (2009) Reconfirmation
BS 6166-3:1988 Lifting slings -- Guide to the selection and safe use of lifting slings for multi-purposes
MHE/11 Obsolescent (2012) Withdrawal
BS 6173:2009 Specification for installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)
GSE/30 Current Confirmation
BS 6206:1981 Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings
B/520 Partially replaced by BS EN 12600:2002
Withdrawal
BS 622:1967 Specification for potassium and sodium cyanides for electroplating
STI/33 Confirmed (2009) Withdrawal
BS 6221-25:2000
Printed wiring boards -- Guide to the rework and repair of soldered surface mounted printed board assemblies
EPL/501 Current Withdrawal
BS 6222-2:2009 Domestic kitchen equipment -- Fitted kitchen units, peninsular units, island units and breakfast bars. Performance requirements and test methods
FW/0/2 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 6229:2003 Flat roofs with continuously supported coverings. Code of practice
B/546 Current Reconfirmation
BS 6256:1989 Specification for paper for steam sterilization paper bags, pouches and reels for medical use
LBI/35 Obsolescent (2011) Reconfirmation
BS 6262:1982 Code of practice for glazing for buildings B/520/4 Partially replaced by Parts 1-4 and 6-7 of BS 6262. It will be withdrawn on publication of BS 6262-5
Withdrawal
BS 6262-1:2005 Glazing for buildings -- General methodology for the selection of glazing
B/520/4 Current Confirmation
BS 6262-2:2005 Glazing for buildings -- Code of practice for energy, light and sound
B/520/4 Current Confirmation
BS 6262-3:2005 Glazing for buildings -- Code of practice for fire, security and wind loading
B/520/4 Current Confirmation
BS 6262-4:2005 Glazing for buildings -- Code of practice for safety related to human impact
B/520/4 Current Confirmation
BS 6262-6:2005 Glazing for buildings -- Code of practice for special applications
B/520/4 Current Confirmation
BS 6262-7:2005 Glazing for buildings -- Code of practice for the provision of information
B/520/4 Current Confirmation
BS 6332-1:1988 Thermal performance of domestic gas appliances -- Specification for thermal performance of central heating boilers and circulators
GSE/29 Obsolescent (2011) Withdrawal
BS 6349-1:2000 Maritime structures -- Code of practice for general criteria
CB/502 Replaced by BS 6349-1-3:2012 and BS 6349-1-4:2013
Revision in progress
BS 6349-4:1994 Maritime structures -- Code of practice for design of fendering and mooring systems
CB/502 Current Revision in progress
BS 6354:1983 Method for measuring the screen luminance, contrast and reflectance of microform readers
IDT/1 Confirmed (2006) Withdrawal
BS 6359:1983 Specification for dimensions and position of microfiche heading coating (colour stripe)
IDT/1 Confirmed (2006) Reconfirmation
BS 6375-1:2009 Performance of windows and doors -- Classification for weathertightness and guidance on selection and specification
B/538 Current Revision in progress
BS 6391:2009 Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
FSH/17/8 Current Confirmation
BS 6455:1984 Method for monitoring the levels of residual solvents in flexible packaging materials
CW/47 Confirmed (2009) Reconfirmation
BS 6464:1984 Specification for reinforced plastics pipes, fittings and joints for process plants
PRI/88 Confirmed (2009) Reconfirmation
BS 6465-1:2006+A1:2009
Sanitary installations -- Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances
B/209 Current Confirmation
BS 6466:1984 Code of practice for design and installation of ceramic fibre furnace linings
RPI/1 Confirmed (2009) Reconfirmation
BS 6485:1999 PVC-covered conductors for overhead power lines
GEL/20/16 Obsolescent (2012) Reconfirmation
BS 6501-1:2004 Metal hose assemblies -- Guidance on the construction and use of corrugated hose assemblies
GSE/42 Confirmed (2009) Reconfirmation
BS 6525:1984 Specification for design and construction of reservoirs used in hydraulic fluid power systems
MCE/18 Confirmed (2009) Reconfirmation
BS 6533:1984 Guide to macroscopic examination of steel by etching with strong mineral acids
ISE/102 Confirmed (2009) Reconfirmation
BS 6534:1984 Method for quantitative determination of lead in tin coatings
CW/47 Confirmed (2009) Reconfirmation
BS 6586-1:1993 Rigid polyurethane (PUR) foam produced by the press injection method -- Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies
PRI/72 Confirmed (2009) Reconfirmation
BS 6593:1985+A1:2009
Code of practice for On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
PRI/67 Confirmed (2009) Reconfirmation
BS 6611:1985 Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
GME/21/6 Confirmed (2009) Reconfirmation
BS 6642:1985 Specification for disposable plastics refuse sacks made from polyethylene
B/508/1 Obsolescent (2011) Withdrawal
BS 6654:1985 Method for determination of the electrical resistivity of textile floor coverings
PRI/3 Confirmed (2009) Withdrawal
BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice
GEL/65 Current Confirmation
BS 6744:2001+A2:2009
Stainless steel bars for the reinforcement of and use in concrete. Requirements and test methods
ISE/104 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 6779-1:1998 Highway parapets for bridges and other structures -- Specification for vehicle containment parapets of metal construction
B/509/1 Partially replaced by BS EN 1317-1:1998
Reconfirmation
BS 6779-2:1991 Highway parapets for bridges and other structures -- Specification for vehicle containment parapets of concrete construction
B/509 Partially replaced by BS EN 1317-1:1998
Reconfirmation
BS 6779-3:1994 Highway parapets for bridges and other structures -- Specification for vehicle containment parapets of combined metal and concrete construction
B/509 Confirmed (2006); Partially replaced by BS EN 1317-1:1998
Reconfirmation
BS 6808-1:1987 Coordinate measuring machines -- Glossary of terms
TDW/4 Current Confirmation
BS 6810-1:1987 Determination of metals in textiles -- Analysis by atomic absorption and colorimetric spectroscopy
TCI/80 Current Confirmation
BS 684-1.7:1976 Methods of analysis of fats and fatty oils. Physical methods. -- Determination of surface-drying time
AW/307 Confirmed (2009) Reconfirmation
BS 684-1.8:1976 Methods of analysis of fats and fatty oils. Physical methods -- Determination of smoke point
AW/307 Confirmed (2009) Reconfirmation
BS 684-1.9:1976 Methods of analysis of fats and fatty oils. Physical methods. -- Determination of water-insoluble solvents
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.12:1984
Methods of analysis of fats and fatty oils. Other methods -- Determination of oxidized fatty acids
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.15:1986
Methods of analysis of fats and fatty oils. Other methods -- Calculation of total saponifiable matter
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.16:1976
Methods of analysis of fats and fatty oils. Other methods. -- Determination of copper. Colorimetric method
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.17:1976
Methods of analysis of fats and fatty oils. Other methods. -- Determination of iron. Colorimetric method
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.20:1977
Methods of analysis of fats and fatty oils. Other methods -- Determination of carotene in vegetable oils
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.27:1987
Methods of analysis of fats and fatty oils. Other methods. -- Determination of bleachability
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.29:1978
Methods of analysis of fats and fatty oils. Other methods. -- Cottonseed oil test (Halphen)
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.4:1976 Methods of analysis of fats and fatty oils. Other methods -- Calculation of total fatty matter
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.48:1998
Methods of analysis of fats and fatty oils. Other methods -- Determination of mineral acidity
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.8:1977 Methods of analysis of fats and fatty oils. Other methods. -- Determination of total neutral oil
AW/307 Confirmed (2009) Reconfirmation
BS 6873:1988 Specification for filament lamps for cycles CPL/34/1 Confirmed (2009) Reconfirmation
BS 6910-2:1989 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. -- Code of practice for on-site installation
GEL/20/11 Obsolescent (2011) Reconfirmation
BS 6F 37:1990 Specification for 570 g/m$u2 and 640 g/m$u2 cotton canvas fabrics for aerospace purposes
ACE/65 Confirmed (2009) Reconfirmation
BS 6V 3:1943 Specification for aircraft material. High strength plywood for aircraft
ACE/65 Obsolescent (2012) Withdrawal
BS 6W 8:1938 Tie rods (swaged) (No. 4 B.A. to $9H inch B.S.F. inclusive) for aircraft purposes
ACE/12 Obsolescent (2012) Withdrawal
BS 7044-1:1990 Artificial sports surfaces -- Classification and general introduction
PRI/57 Current Confirmation
BS 7044-4:1991 Artificial sports surfaces -- Specification for surfaces for multi-sports use
PRI/57 Partially replaced by BS EN 14877:2006, BS EN 14904:2006, BS EN 15330-1:2007 and BS 15330-2
Withdrawal
BS 7078:1989 Method for determination of the electrical resistance to earth of an installed textile floor covering
PRI/3 Confirmed (2009) Withdrawal
BS 7085:1989 Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
GME/21/6 Confirmed (2009) Reconfirmation
BS 7121-13:2009
Code of practice for safe use of cranes -- Hydraulic gantry lifting systems
MHE/3/11 Current Confirmation
BS 7122:1989 Specification for welded steel tanks for the road transport of liquefiable gases
AUE/18 Confirmed (2009) Reconfirmation
BS 7134-0:1989 Testing of engineering ceramics -- Introduction and guide to sampling
RPI/1 Confirmed (2009) Reconfirmation
BS 7159:1989 Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems…
PRI/88 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 7164-10:1994
Chemical tests for raw and vulcanized rubber -- Method for preparation and examination of water extract
PRI/23 Obsolescent (2011) Withdrawal
BS 7164-11.1:1994
Chemical tests for raw and vulcanized rubber. Butadiene rubber -- Method for determination of microstructure
PRI/23 Obsolescent (2011) Withdrawal
BS 7164-13:1994
Chemical tests for raw and vulcanized rubber -- Method for determination of total hydrocarbon content
PRI/23 Obsolescent (2011) Withdrawal
BS 7197:1990 Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV
GEL/20/11 Confirmed (2009) Reconfirmation
BS 7225-3.1:1990
Classification of refractories. Ceramic fibre products -- Blankets, mats, felts and paper
RPI/1 Confirmed (2009) Withdrawal
BS 7254-6.2:1990
Orthopaedic implants. Forgings -- Method for specifying forgings
CH/150/1 Obsolescent (2012) Withdrawal
BS 7328:1990 Specification for model steam engines and internal combustion engines for models
CW/15 Obsolescent (2011) Withdrawal
BS 7333:1990 Specification for slewing jib cranes MHE/3/3 Current Confirmation
BS 7335-1:1991 Installation of monolithic refractories -- Code of practice for installation by casting
RPI/1 Confirmed (2009) Reconfirmation
BS 7335-2:1991 Installation of monolithic refractories -- Code of practice for installation by gunning
RPI/1 Confirmed (2009) Reconfirmation
BS 7363:1990 Method for bead-on-plate (BOP) test for welds WEE/2 Confirmed (2009) Withdrawal
BS 7371-1:2009 Coatings on metal fasteners -- Specification for general requirements and selection guidelines
FME/9 Current Confirmation
BS 7371-3:2009 Coatings on metal fasteners -- Specifications for electroplated zinc coatings
FME/9 Current Confirmation
BS 7385-2:1993 Evaluation and measurement for vibration in buildings -- Guide to damage levels from groundborne vibration
GME/21/3 Confirmed (2009) Reconfirmation
BS 7388:1991 Guide for prevention of leaks from hydraulic fluid power systems
MCE/18 Confirmed (2009) Reconfirmation
BS 7407:1991 Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children
CW/15 Obsolescent (2011) Withdrawal
BS 7409:1996 Specification for safety requirements for wheeled child conveyances
CW/1/2 Replaced by BS EN 1888:2003 as it is called up in the Wheeled Child Conveyances (Safety) Regulations 1997
Withdrawal
BS 7412:2007 Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
B/538/1 Current Confirmation
BS 7414:1991 Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
B/538/1 Current Confirmation
BS 7416:1991 Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
MCE/18 Confirmed (2009) Reconfirmation
BS 7417:1991 Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
MCE/18 Confirmed (2009) Reconfirmation
BS 743:1970 Specification for materials for damp-proof courses
B/546 Partially replaced by BS 6398:1983, BS 6515:1984 and BS 8215:1991
Withdrawal
BS 7457:1994 Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves
PRI/72 Confirmed (2009) Reconfirmation
BS 7494-1:1991 Performance and testing of teleprotection equipment of power systems. -- Specification for narrow-band command systems
PEL/57 Confirmed (2009) Reconfirmation
BS 7533-13:2009
Pavements constructed with clay, natural stone or concrete pavers -- Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers
B/507 Current Revision in progress
BS 7533-3:2005+A1:2009
Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
B/507 Current Confirmation
BS 7557:1992 Specification for limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs
CW/47 Confirmed (2009) Reconfirmation
BS 7563:1999 Specification for non-prescriptive graduated support hosiery
CH/205/1 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 7590:1992 Method for statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid
ISE/102 Confirmed (2009) Reconfirmation
BS 779:1989 Specification for cast iron boilers for central heating and indirect hot water supply (rated output 44 kW and above)
RHE/10 Confirmed (2009); Partially replaced by BS EN 303-1:1999 and BS EN 303-4:1999
Withdrawal
BS 7793-2:1996 Vitreous enamel coatings for use on bolted steel panels -- Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
STI/36 Current Confirmation
BS 7797:1998 Specification for industrial duct heaters using metal-sheathed elements
PEL/27 Confirmed (2009) Reconfirmation
BS 7798:1998 Specification for industrial immersion heaters using metal-sheathed elements
PEL/27 Confirmed (2009) Reconfirmation
BS 7799-3:2006 Information security management systems -- Guidelines for information security risk management
IST/33 Current Withdrawal
BS 7800:2006 Automotive fuel. High octane (super) unleaded petrol. Specification
PTI/2 Current Withdrawal
BS 7830:1996 Guide to the design and preparation of on-screen documentation for users of application software
IST/15 Obsolescent (2011) Withdrawal
BS 7846:2009 Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000 V, having low emission of smoke and corrosive gases when affected by fire. Specification
GEL/20/17 Current Confirmation
BS 7861-2:2009 Strata reinforcement support systems components used in coal mines -- Specification for flexible systems for roof reinforcement
MRE/1 Current Confirmation
BS 7863:2009 Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers
FSH/2 Current Revision in progress
BS 7870-6.1:1999
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations -- PVC insulated and PVC sheathed cables
GEL/20/16 Obsolescent (2012) Withdrawal
BS 7870-6.2:1999
LV and MV polymeric insulated cables for use by distribution and generation utilities -- XLPE or HEPR insulated and PVC sheathed cables
GEL/20/16 Obsolescent (2012) Withdrawal
BS 7870-6.3:1999
LV and MV polymeric insulated cables for use by distribution and generation utilities -- Cables with thermosetting insulation and non-halogenated sheath
GEL/20/16 Obsolescent (2012) Withdrawal
BS 7883:2005 Code of practice for the design, selection, installation, use andmainten ance of anchor devices conforming to BS EN 795
PH/5 Current Confirmation
BS 7888-4.1:2006+A1:2008
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Cables with extruded insulation
GEL/20/11 Current Confirmation
BS 7888-4.2:2006+A1:2008
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Cables with impregnated paper insulation
GEL/20/11 Current Confirmation
BS 7900:1998 Specification for examination of the surface texture of precision steel castings
ISE/111 Confirmed (2009) Reconfirmation
BS 7922:2004 Electric cables. Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV ($iU$dm = 420 kV). Requirements and test methods
GEL/20/16 Confirmed (2009) Reconfirmation
BS 7923:2004 Electric cables. Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV ($iU$dm = 300 kV). Requirements and test methods
GEL/20/16 Confirmed (2009) Reconfirmation
BS 7926:1998 Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel
ISE/111 Confirmed (2009) Reconfirmation
BS 7928-2:2009 Head and face protection for cricketers -- Face protectors for cricket wicket-keepers
PH/6/6 Current Confirmation
BS 7941-1:1999 Methods for measuring the skid resistance of pavement surfaces -- Side-way force coefficient routine investigation machine
B/510/5 Replaced by BS 7941-1:2006 Withdrawal
BS 7958:2009 Closed circuit television (CCTV). Management and operation. Code of practice
GW/3 Current Confirmation
BS 7959-1:2004 Materials for the control of liquid spills -sorbency CII/63 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 7961:2004 Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle.
AUE/8 Confirmed (2009) Reconfirmation
BS 7967-2:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances -- Guide for using electronic portable combustion gas analysers in measurement of carbon monoxide and determination of combustion performance
GSE/30 Current Confirmation
BS 7967-3:2005 Carbon monoxide in dwellings and combustion performance of gas-fired appliances -- Guide for responding to measurements obtained from electronic portable combustion gas analysers
GSE/30 Current Confirmation
BS 7969:2004 Adhesives. Ethyl and methyl cyanoacrylate types 1,2 and 3
PRI/52 Confirmed (2009) Reconfirmation
BS 7972:2001+A1:2009
Safety requirements and test methods for children's bedguards for domestic use
CW/1/3 Current Confirmation
BS 7984:2008 Keyholding and response services. Code of practice
GW/3 Current Confirmation
BS 7F 47:1990 Specification for cotton tape for aerospace purposes
ACE/65 Confirmed (2009) Reconfirmation
BS 8000-2.1:1990
Workmanship on building sites. Code of practice for concrete work -- Mixing and transporting concrete
B/517 Confirmed (2009) Withdrawal
BS 8102:2009 Code of practice for protection of below ground structures against water from the ground
B/526 Current Revision in progress
BS 8103-3:2009 Structural design of low-rise buildings -- Code of practice for timber floors and roofs for housing
B/204 Current Confirmation
BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
GME/25 Confirmed (2009) Reconfirmation
BS 812-105.1:1989
Testing aggregates. Methods for determination of particle shape -- Flakiness index
B/502/6 Obsolescent (2012); Replaced by BS EN 933-3:1997
Withdrawal
BS 812-105.2:1990
Testing aggregates. Methods for determination of particle shape -- Elongation index of coarse aggregate
B/502/6 Obsolescent (2011) Withdrawal
BS 812-110:1990
Testing aggregates -- Methods for determination of aggregate crushing value (ACV)
B/502/6 Obsolescent (2012); Partially replaced by BS EN 1097-2:1998
Confirmation
BS 812-111:1990
Testing aggregates -- Methods for determination of ten per cent fines value (TFV)
B/502/6 Obsolescent (2012); Partially replaced by BS EN 1097-2:1998
Confirmation
BS 812-112:1990
Testing aggregates -- Method for determination of aggregate impact value (AIV)
B/502/6 Obsolescent (2012); Partially replaced by BS EN 1097-2:1998
Confirmation
BS 812-119:1985
Testing aggregates -- Method for determination of acid-soluble material in fine aggregate
B/502/6 Obsolescent (2012); Replaced by BS EN 1744-1:1998
Confirmation
BS 812-124:2009
Testing aggregates -- Method for determination of frost heave
B/502/6 Current Confirmation
BS 812-2:1995 Testing aggregates -- Methods for determination of density
B/502/6 Partially replaced by BS EN 1097-3:1998
Confirmation
BS 8203:2001+A1:2009
Code of practice for installation of resilient floor coverings
PRI/60 Current Confirmation
BS 8213-4:2007 Windows, doors and rooflights -- Code of practice for the survey and installation of windows and external doorsets
B/538 Current Confirmation
BS 8298:1994 Code of practice for design and installation of natural stone cladding and lining
B/545 Replaced by BS 8298 Parts 1 to 4
Withdrawal
BS 8405:2003+A1:2009
Personal protective equipment against falls from a height. Descender devices. Single-hand operated for self or assisted rescue
PH/5 Current Confirmation
BS 8406:2009 Event stewarding and crowd safety. Code of practice
GW/3/-/16 Current Confirmation
BS 8407:2002 Specification for mechanical and spliced joints in conveyor belting for use underground
PRI/67 Confirmed (2009) Reconfirmation
BS 8409:2009 Fully enclosed play facilities. Code of practice SW/65 Current Confirmation
BS 8425:2003 Code of practice for installation of laminate floor coverings
PRI/60 Confirmed (2009) Reconfirmation
BS 8433:2004 Microwavable personal warmers. Specification PRI/68 Confirmed (2009) Reconfirmation
BS 8434-2:2003+A2:2009
Methods of test for assessment of the fire integrity of electric cables - unprotected small cables for use in emergency circuits. BS EN 50200 with a 930$0D flame and with water spray
GEL/20/18 Current Confirmation
BS 8451:2004 Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
PRI/66 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 8461:2005+A1:2009
Football goals. Code of practice for their procurement, installation, maintenance, storage and inspection
SW/136 Current Confirmation
BS 8466:2006 Hats. Protection against solar UVR. Method of test and performance requirements
TCI/66 Current Confirmation
BS 8468-3.1:2009
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification
PH/4 Current Confirmation
BS 8468-3.2:2009
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Air-purifying devices incorporating a hood for escape. Specification
PH/4 Current Confirmation
BS 8492:2009 Telecommunications equipment and telecommunications cabling. Code of practice for fire performance and protection
TCT/7/2 Current Confirmation
BS 8495:2007 Code of practice for digital CCTV recording systems for the purpose of image export to be used as evidence
GW/1/10 Current Confirmation
BS 8499:2009 Specification for domestic gas meter boxes and meter bracket
GSE/25 Current Confirmation
BS 8507-2:2009 Code of practice for close protection services -- Services outside the United Kingdom
GW/3 Current Confirmation
BS 8510:2009 Child use and care articles. Safety of children's sleep bags. Safety requirements and test methods
CW/1/5 Current Confirmation
BS 8513:2009 Personal fall protection equipment. Twin-legged energy-absorbing lanyards. Specification
PH/5 Current Confirmation
BS 8517-1:2009 Security dogs -- Code of practice for the use of general purpose security dogs
GW/3 Current Confirmation
BS 8520-1:2009 Equipment used in the controlled removal of asbestos-containing materials -- Controlled wetting equipment. Specification
HS/1 Current Confirmation
BS 8520-2:2009 Equipment used in the controlled removal of asbestos-containing materials -- Negative pressure units. Specification
HS/1 Current Confirmation
BS 8520-3:2009 Equipment used in the controlled removal of asbestos-containing materials -- Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice
HS/1 Current Confirmation
BS 8521:2009 Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems
BS 864-3:1975 Capillary and compression tube fittings of copper and copper alloy -- Compression fittings for polyethylene pipes
NFE/34 Obsolescent (2011) Withdrawal
BS 8726-1:2002 Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design -- Compression springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 8726-2:2002 Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design -- Torsion springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 8887-2:2009 Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- Terms and definitions
TDW/4 Current Confirmation
BS 8902:2009 Responsible sourcing sector certification schemes for construction products. Specification
BS 9000-3:1996 General requirements for a system for electronic components of assessed quality -- Specification for the national implementation of the IECQ system
EPL/40X Confirmed (2009) Reconfirmation
BS 903-1:1995 Physical testing of rubber -- Guide to the selection and use of methods of test for rubber
PRI/22 Obsolescent (2012) Withdrawal
BS 903-A9:1988 Physical testing of rubber -- Determination of abrasion resistance
PRI/22 Obsolescent (2012); Partially replaced by BS ISO 4649:2002
Withdrawal
BS 903-C4:1983 Physical testing of rubber -- Determination of electric strength
PRI/22/-/5 Current Reconfirmation
BS 9070-3:1970 Specification for fixed capacitors of assessed quality: generic data and methods of test -- Tantalum electrolytic capacitors
EPL/40X Replaced by BS CECC 30800:1978, due to existing approvals
Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 9074 N007:1978
Detail specification for fixed polystyrene film dielectric extended foil capacitors. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level
EPL/40X Replaced by BS 9074 N007:1981, due to existing approvals
BS 9620:1975 Specification for quartz crystal oscillators of assessed quality: generic data and methods of test
EPL/49 Obsolescent (2011) Withdrawal
BS A 211:1961 Specification for 100$0D countersunk head steel bolts (Unified threads and cruciform recesses) for aircraft
ACE/12 Partially replaced by BS A 273:1978
Confirmation
BS A 22:1947 Units of measurement in civil aviation ACE/1 Confirmed (2009) Reconfirmation
BS AU 149a:1980
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)
AUE/16 Obsolescent (2011) Withdrawal
BS AU 177a:1980
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)
AUE/16 Obsolescent (2011) Withdrawal
BS AU 194:1984 Specification for performance of electrical connections between towing vehicles and trailers
AUE/16 Obsolescent (2012) Withdrawal
BS AU 196:1984 Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles
AUE/16 Obsolescent (2012) Withdrawal
BS AU 224b:1997
Specification for portable wheel ramps for cars and light vans
AUE/9 Obsolescent (2011) Withdrawal
BS AU 236:1990 Specification for circular electronic tachographs for road vehicles
AUE/9 Confirmed (2009) Reconfirmation
BS AU 5:1963 Specification for dimensions of a 'contact' type coupling for vacuum and pressure braking systems on trailers and semi-trailers
AUE/11 Partially replaced by BS AU 138a:1980
Withdrawal
BS G 102:1971 Specification for general requirements for rotating electrical machinery
ACE/1 Confirmed (2009) Reconfirmation
BS G 118:1949 Specification for aircraft magnetic compass, direct-reading
ACE/1 Confirmed (2009) Reconfirmation
BS G 122:1949 Specification for aircraft magnetic compass, remote-reading (gyro-stabilized)
ACE/1 Confirmed (2009) Reconfirmation
BS G 123:1949 Specification for aircraft magnetic compass, remote-reading (non-stabilized)
ACE/1 Confirmed (2009) Reconfirmation
BS G 125:1950 Specification for turn and slip indicators for aircraft purposes
ACE/1 Confirmed (2009) Reconfirmation
BS G 133:1951 Specification for electro-magnetic indicators for extra low voltage aircraft systems
ACE/1 Confirmed (2009) Reconfirmation
BS G 152:1956 Specification for a.c. electrically-operated artificial horizons for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 154:1958 Screws with captive washers for aircraft ACE/6 Partially replaced by BS G 203:1967
Withdrawal
BS G 183:1963 Specification for interconnections in analogue data transmission systems in aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 190:1964 Specification for cabin altimeters for aircraft ACE/1 Confirmed (2009) Reconfirmation
BS G 194:1965 Specification for lever-operated manual switches for aircraft
ACE/6 Replaced by BS G 224:1978 Withdrawal
BS G 200:1967 Specification for miniature lever-operated manual switches
ACE/6 Replaced by BS G 224:1978 Withdrawal
BS G 211:1971 Specification for reflection-reducing coating of instrument windows and lighting wedges
ACE/1 Confirmed (2009) Reconfirmation
BS G 226:1979 Specification for counter and pointer, servo type, pressure altimeter systems
ACE/1 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS G 234:1984 Specification for self-aligning air flow angle transmitters for use on aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 240:1988 Specification for pressure transducers for use on aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 246:1991 Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
ACE/6 Partially replaced by parts of BS EN 4056 & BS EN 4057
Withdrawal
BS G 257-3:2004
Design of electromagnetic hazard protection of civil aircraft -- Guide to clearance and testing
ACE/66 Confirmed (2009) Reconfirmation
BS HC 202:1973 Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS HC 205:1974 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS HC 206:1975 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS HC 301:1973 Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS L 102:1971 Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-/24 Replaced by BS EN 2100:1992 Withdrawal
BS L 111:1971 Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
ACE/61/-/24 Replaced by BS EN 2326:1992 Withdrawal
BS L 112:1971 Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 160:1976 Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
ACE/61/-/24 Replaced by BS EN 2127:1992 Withdrawal
BS L 168:1978 Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 171:1990 Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 172:1989 Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 173:1991 Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 174:1991 Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 513:1973 Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS M 22:1949 Specification for silica gel acid activated for aircraft purposes
ACE/1 Confirmed (2009) Reconfirmation
BS M 33:1970 Specification for dimensions of elastomeric toroidal sealing rings (inch series) to Class 1 tolerances for aircraft
ACE/12 Replaced by BS M 48:1976 Withdrawal
BS M 34:1970 Method of preparation and use of radiographic techniques
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS M 36:1970 Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 37:1970 Method for the etch inspection of metallic materials and components
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 38:1971 Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 39:1972 Method for penetrant inspection of aerospace materials and components
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 40:1972 Methods for measuring coating thickness by non-destructive testing
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 42:1972 Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 43:1973 Methods of zoning aircraft and referencing access doors and panels
ACE/1 Confirmed (2009) Reconfirmation
BS QC 200012:1996
Process assessment schedule for printed board design facilities
EPL/501 Confirmed (2009) Withdrawal
BS QC 210000:1996
Technology approval schedules. Requirements under the IEC Quality Assessment System for Electronic Components (IECQ)
EPL/40X Confirmed (2009) Reconfirmation
BS S 134:1965 Specification for aircraft material. 3 per cent chromium-molybdenum-vanadium steel (air hardening) (100 tonf/sq in: limiting ruling section 1$9B inches)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS S 148:1969 Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS S 153:1976 Specification. 2$9H% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 154:1976 Specification. 2$9H% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 155:1976 Specification for nickel-silicon-chromium-molybdenum-vanadium steel (vacuum arc remelted) billets, bars, forgings and parts (1900-2100 MPa: limiting ruling section 75 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 156:1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 157:1976 Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 158:1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 159:1981 Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 160:1990 Specification for chromium-nickel corrosion-resisting steel - bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 18, Ni 10.5, controlled nitrogen content)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 161:1990 Specification for chromium-nickel-molybdenum corrosion-resisting steel. Bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 17.5, Ni 12.5, Mo 2.25, controlled nitrogen content)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 163:1990 Specification for nickel-chromium-molybdenum-vanadium steel forging stock, forgings, bars and parts (1900 MPa : limiting ruling section 100 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS SP 118:1958 Tie rods (Unified threads) for aircraft ACE/12 Obsolescent (2012) Withdrawal
BS SP 53:1953 Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed steel wire rope for aircraft (suitable for use with British Standard W.9 wire rope)
ACE/12 Obsolescent (2012) Withdrawal
BS SP 54:1953 Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed non-corrodible steel wire rope for aircraft (suitable for use with British Standard W.11 wire rope)
ACE/12 Confirmed (2006) Withdrawal
BS V 38:1967 Specification for Sitka spruce as rough timber ACE/65 Obsolescent (2012) Withdrawal
BS X 36:1998 Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes
ACE/65/-/3 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS X 37:2004 Intumescent paint for aerospace purposes. Specification
ACE/65/-/3 Confirmed (2009) Reconfirmation
CP 102:1973 Code of practice for protection of buildings against water from the ground
B/546 Partially replaced by BS 8102:1990 and BS 8215:1991
Withdrawal
CP 118:1969 The structural use of aluminium B/525/9 Replaced by BS 8118-1:1991 and BS 8118-2:1991
Withdrawal
DD 140-2:1987 Wall ties -- Recommendations for design of wall ties
B/519/3 Confirmed (2011) Withdrawal
DD 216:1993 Method for determination of chloride content of fresh concrete
B/517/1 Obsolescent (2011) Withdrawal
DD 249:1999 Testing aggregates. Method for the assessment of alkali-silica reactivity. Potential accelerated mortar-bar method
B/502/6 Confirmed (2011) Confirmation
DD 256:2002 Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption. Specification
EH/6 Obsolescent (2011) Withdrawal
DD 265:2008 Protocol for communications between a lift alarm system and an alarm receiving station (rescue centre). Specification
MHE/4 Confirmed (2012) Withdrawal
DD 8455:2007 Materials for gaskets and weatherstripping for windows, doors, conservatories and curtain walling. Requirements and test methods
B/538/4 Confirmed (2011) Withdrawal
DD 8483:2008 Cranes. Condition monitoring. Specification for data logging equipment
MHE/3/11 Confirmed (2011) Withdrawal
PD 60065:2001 Interpretation sheets for BS EN 60065:1998. Audio, video and similar electronic apparatus. Safety requirements
EPL/108 Replaced by BS EN 60065:2002+A12:2011
Withdrawal
PD 6495:1992 IFAN-Guide 1. Method for determining the advantages of (company) standardization projects
BSSMP/- Current Withdrawal
PD 6513:1985 Magnetic particle flaw detection. A guide to the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072
WEE/46 Current Confirmation
PD 6547:2004+A1:2009
Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3
B/509 Current Confirmation
PD 6682-3:2003 Aggregates -- Aggregates for mortar. Guidance on the use of BS EN 13139
B/502 Confirmed (2008) Reconfirmation
PD 6682-8:2004 Aggregates -- Aggregates for railway ballast. Guidance on the use of BS EN 13450
B/502 Current Confirmation
PD 6688-1-4:2009
Background information to the National Annex to BS EN 1991-1-4 and additional guidance
B/525/1 Current Confirmation
PD 6689:2009 Surface treatments. Guidance on the use of BS EN 12271 and BS EN 12273
B/510/2 Current Confirmation
PD 6692:2006 Asphalt. Guidance on the use of BS EN 12697 "Bituminous mixtures. Test methods for hot mix asphalt"
B/510/1 Current Confirmation
PD 6695-1-10:2009
Recommendations for the design of structures to BS EN 1993-1-10
CB/203 Current Confirmation
PD 6695-1-9:2008
Recommendations for the design of structures to BS EN 1993-1-9
B/525/10 Current Confirmation
PD 6698:2009 Recommendations for the design of structures for earthquake resistance to BS EN 1998
B/525/8 Current Confirmation
PD 6702-1:2009 Structural use of aluminium -- Recommendations for the design of aluminium structures to BS EN 1999
B/525/9 Current Confirmation
PD 6703:2009 Structural bearings. Guidance on the use of structural bearings
B/522 Current Confirmation
PD 6705-3:2009 Structural use of steel and aluminium -- Recommendations for the execution of aluminium structures to BS EN 1090-3