Bronze Gate Valves - · PDF file04.06 All Hattersley bronze gate valves are inside screw pattern with either rising stem or non-rising stem configuration. The majority of the range

04.06

Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820Email: [email protected]

[email protected]

Bronze Gate Valves

SECTION2a

Hattersley-Section 2a 25/4/06 9:06 am Page 1

www.hattersley.com

04.06

Contents PageFigure Number Index 2Bronze Gate Valves Introduction 3The Pressure Equipment Directive 4Bronze Gate Valves Data Sheets 5 - 12

Fig No Page

33X 533XLS 530 630LS 630C 730CLS 733 8669 928 1035PN16 11609 12

In this catalogue we have endeavoured to make the information as accurate aspossible, and we cannot accept any responsibility should it be found that in anyrespect the information is inaccurate or incomplete or becomes so as a resultof further developments.

Contents

Bronze Gate Valves

2


04.06

All Hattersley bronze gate valves areinside screw pattern with either risingstem or non-rising stem configuration.

The majority of the range have athreaded bonnet but union bonnetvalves are available.

The BSI Kitemark against a figurenumber in the table below indicatesthat all or part of that range isKitemarked to the relevant BritishStandard.

The WRAS Approved Product Markagainst a figure number indicates thatall or part of that range has beenindependently assessed and certifiedunder the Water Regulations AdvisoryScheme and is listed in the WaterFittings and Materials Directory.

Valve bodies, with the exception ofthe DZR range, are made frombronze castings and have integralseating surfaces.

Valves are fitted with asbestos-freegland packing as standard.

$ WRAS Approved Product* Kitemarked to the relevant British Standard

Fig No PN Series End Size Bonnet WedgeRating Connections Range Pattern Material

35PN16$ 16 B Flanged 15 - 100mm Threaded Bronze30C*$ 16 B Compression 15 - 54mm Threaded Bronze30CLS*$ 16 B Compression 15 - 54mm Threaded Bronze30*$ 20 B Threaded 1/4 - 3in Threaded DZR Alloy30LS*$ 20 B Threaded 1/4 - 3in Threaded DZR Alloy33X*$ 20 B Threaded 1/4 - 4in Threaded Bronze33XLS*$ 20 B Threaded 1/4 - 4in Threaded Bronze33* 32 B Threaded 1/4 - 3in Threaded Bronze669 32 B Threaded 1/4 - 2in Union Bronze28 - - Threaded 1/2 - 3in Threaded Bronze609 32 A Threaded 1/4 - 3in Threaded Bronze

Introduction

Bronze Gate Valves

3


04.064

The Pressure Equipment Directive

Bronze Gate Valves

FLUID GROUPS2G = Group 2 gases (Also Group 2 liquids but NOT group 1 gases nor Group 1 liquids)2L = Group 2 liquids only

CATEGORYSEP = Sound Engineering PracticeI = Category I (CE Marked)

Fig. No. PN(PS) DN Fluid Group (1) Category30C/30CLS 16 15-54 2L SEP30/30LS 20 1/2"-2" 2G SEP

1/4"-2" 2G SEP33X/33XLS 20 21/2"-4" 2G 1 (2)

1/4"-11/4" 2G SEP33 32 11/2"-3" 2G 1 (2)

1/4"-11/4" 2G SEP669 32 11/2"-2" 2G 1 (2)28 8.6 1/2"-3" 2L SEP

15-50 2G SEP35 16 65-100 2G 1 (2)609 32 1/4"-3" 2G SEP


04.06 5

Fig. 33X - 33XLS

Bronze Gate ValvesPN20 - Series B

Pressure/Temperature RatingBSEN12288 PN20 Series B9 bar at 180ºC20 bar from -10 to 100ºC

Test Pressures (Hydraulic)Shell: 30 barSeat: 22 bar

SpecificationKitemarked to BS EN 12288WRAS Approved ProductNon-rising stemThreaded bonnetOne piece wedgeBS21 Taper thread (ISO 7)Available with NPT thread (33XAT)1/2” to 4”Available with lockshield (33XLS) up to 2”See page 4 of this section for PED category.

A

B

C

D

Material Specification

Specification

Component Material BS EN

Body Bronze 1982 CC491K

Bonnet Bronze 1982 CC491K

Stem (1/4 to 2in) DZR Brass 12164 CW602N

(21/2 & 3in) Brass 12164 CW614N

(4in) Manganese Bronze

Disc Bronze 1982 CC491K

Packing Asbestos Free

Packing Gland (1/4 to 3in) Brass 12164 CW614N

(4in) Bronze 1982 CC491K

Gasket (3 & 4in) Asbestos Free

Dimensions

Nominal Size in 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3 4

A mm 46 46 51 55 63 71 73 83 96 105 162

B mm 75 75 82 95 118 144 166 190 219 259 366

C mm 57 57 57 69 69 76 81 94 140 150 232

D mm 87 87 86 112 124 149 175 196 - - -

Weight kg 0.27 0.26 0.35 0.55 0.84 1.18 1.66 2.55 4.30 6.4 18.3733X

33XLS


04.066


Specification

Component Material BS EN ASTM

Stem DZR Copper Alloy 12164 CW602N -

Gland Packing Asbestos Free

Stem Ring DZR Copper Alloy 12164 CW602N -

Bonnet DZR Copper Alloy 12165 CW602N -

Body DZR Copper Alloy 12165 CW602N -

Disc DZR Copper Alloy 12165 CW602N -

Dimensions

Nominal Size in 1/2 3/4 1 11/4 11/2 2

A mm 51.6 56 64 72 75 91

B mm 90 100 120 125 145 170

C mm 56.8 56.8 69.2 69.2 75.5 81.5

D mm 80 85 105 110 130 155

Lockshield Key Fig 391 391 391 391 391 391

Ref A A 2 2 2A 3

Weight kg 0.32 0.45 0.7 1.22 1.55 2.45

A

B

C

E

Fig. 30 - 30LS

DZR Gate ValvesPN20 - Series B

Pressure/Temperature RatingBSEN12288 PN20 Series B9 bar at 180ºC20 bar from -10 to 100ºC

Test Pressures (Hydraulic)Shell: 30 barSeat: 22 bar

SpecificationKitemarked to BS EN 12288WRAS Approved ProductNon-rising stemThreaded bonnetOne piece wedgeBS21 Taper thread (ISO 7)Available with lockshield (30LS)Available with NPT thread (30AT)See page 4 of this section for PED category.

30LS

30


04.06 7

Fig. 30C - 30CLS

DZR Gate ValvesPN16


Specification


Body Bronze B62-C83600

Disc Bronze B62-C83600

Stem Bronze B62-C83600 or B21-C48200

Bonnet Bronze B62-C83600 or B124-C37700

Packing PTFE or PTFE/Neoprene

Gland Brass B16-C36000

Packing Nut Brass B16-C36000 / B124-C37700

Handwheel Cast Iron

Handwheel Nut Steel

Compression Olive Brass B135-C26000

Compression Nut Brass B584-C85700

Dimensions

Nominal Size mm 15 22 28 35 42 54

A mm 54 61 67 83 83 100

B mm 77 88 106 122 136 170

C mm 46 53 58 72 80 97

D mm 12.7 19.1 25.4 31.8 38.1 50.8

E mm 80 85 105 110 130 155

F mm 65 70 76 92 101 125

Lockshield Key Fig No 391 391 391 391 391 391

Ref A A 2 2 2A 3

Weight kg 0.34 0.49 0.75 1.06 1.36 2.37

Pressure/Temperature Rating(for liquid service)5 bar at 120ºC6 bar at 110ºC10 bar at 65ºC16 bar from 2 to 30ºC

Test Pressures (Hydraulic)Shell: 24 barSeat: 17.6 bar

SpecificationKitemarked to BS EN 12288WRAS Approved ProductNon-rising stemThreaded bonnetOne-piece wedgeCompression ends to BS EN 1254-2Suitable for copper pipe to BS EN 1087:Table XAvailable with lockshield (30CLS)See page 4 of this section for PED category.

0 20 40 60 80 100 120 140Temperature ˚C

14

12

10

8

6

2

0

Pre

ssur

e ba

r

4

16

18

F

B

A

E

30CLS

30C

FC

D


04.068

Satura

ted

Stea

m

0 40 80 120 160 200 240 Temperature ˚C

28

24

20

16

12

4

0

Pre

ssur

e ba

r

8

32

36


Specification


Stem Bronze 1982 CC491K B62


Stem Ring Brass 12164 CW614N B455-385

Bonnet (1/4 to 2in) Brass 12165 CW617N B124 Alloy 2

(21/2 & 3in) Bronze 1982 CC491K B62

Body Bronze 1982 CC491K B62

Wedge Bronze 1982 CC491K B62

Dimensions

Nominal Size in 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3

A mm 46 46 51 55 63 71 73 83 108 117

B mm 78 78 86 98 120 148 172 196 241 256

C mm 60 60 70 80 85 95 102 120 140 150

Weight kg 0.36 0.35 0.47 0.6 0.92 1.41 1.92 2.72 5.62 7.89

Fig. 33

Bronze Gate ValvesPN32 - Series B

Pressure/Temperature RatingBS5154 PN32 Series B14 bar at 198ºC32 bar from -10 to 100ºC


SpecificationKitemarked to BS EN 12288Non-rising stemThreaded bonnetOne piece wedgeBS21 Taper thread (ISO 7)Available with NPT thread (33AT) 1/2” to 3”See page 4 of this section for PED category.

A

B

C


04.06 9

Fig. 669

Bronze Gate ValvesPN32 Series A

Pressure/Temperature RatingBSEN12288 PN32 Series A14 bar at 260ºC32 bar from -10 to 120ºC


SpecificationBS EN 12288Rising stemUnion bonnetOne piece wedgeTaper thread (ISO7-1)Available with NPT thread (669AT)See page 4 of this section for PED category.Material Specification

Specification




Stem Bronze 1982 CC491K


Packing Asbestos Free

Gland Brass 12164 CW614N

Packing Nut Brass 12164 CW614N

Handwheel Aluminium

Handwheel Nut Brass 12164 CW614N

A

C

B

Dimensions

Nominal Size in 1/4 3/8 1/2 3/4 1 11/4 11/2 2

A mm 46 46 51 55 63 71 73 83

B mm 134 134 137 169 194 232 266 321

C mm 69 69 76 81 94 100 120 140

Weight kg 0.32 0.31 0.46 0.72 1.10 1.50 2.25 3.20


04.0610

Fig. 28

Bronze Gate Valves - Lever Operated8.6 bar CWP

Pressure/Temperature Rating4 bar at 150ºC8.6 bar cold (non-shock)

Test Pressures (Hydraulic)Shell: 12.5 barSeat: 12.5 bar

SpecificationThreaded coverBS21 Taper thread (ISO7-1)Lever operatedSee page 4 of this section for PED category.


Specification


Stem Stainless Steel 10088-3 X8CrNiS18-9 AISI 420


Stuffing Box Brass 12164 CW614N B455-385

Gate Bronze 1982 CC491K B62

Disk Arm Bronze 1982 CC491K B62

Body Bronze 1982 CC491K B62

Dimensions

Nominal Size in 1/2 3/4 1 11/4 11/2 2 21/2 3

A mm 46 51 55 64 65 81 95 122

B mm 40 45 55 65 70 95 120 145

C mm 76 89 102 114 127 140 152 178

Weight kg 0.4 0.6 1.0 1.4 1.7 2.8 4.8 8.0

A

B

C


04.06 11

0 40 80 120 160 200Temperature ˚C

18

16

14

12

10

8

6

4

2

0

Pre

ssur

e ba

r

Satur

ated

Ste

am


Specification


Stem (15 to 50mm) DZR Copper Alloy 12164 CW602N

Stem (65 to 100mm) Bronze 1982 CC491K


Stem Ring (15 to 80mm) Brass 12164 CW614N

(100mm) Bronze 1982 CC491K

Bonnet (15 to 50mm) Bronze 1982 CC491K

(65 to 100mm) Bronze 1982 CC491K


Wedge Bronze 1982 CC491K

Dimensions

Nominal Size mm 15 20 25 32 40 50 65 80 100

A mm 80 90 100 110 120 135 165 185 190

B mm 100 110 130 145 165 200 240 280 365

C mm 70 80 85 95 120 120 155 180 230

D mm 95 105 115 140 150 165 185 200 220

Weight kg 1.4 2.1 2.7 4.0 4.4 6.3 9.1 15.4 22.2

A

C

B

D

Fig. 35PN16

Bronze Gate ValvesPN16 Series B

Pressure/Temperature RatingBS5154 PN16 Series B7 bar at 170ºC16 bar from -10 to 100ºC


SpecificationWRAS Approved productNon-rising stemThreaded bonnetOne piece wedgeFlanged to BS4504 PN16Table E and FAvailable with lockshield (35LS)Available with position indicator andlocking device (35PN16LDI) in all sizesexcept for 32, 65 and 100mm.See page 4 of this section for PED category.


04.0612

Pressure/Temperature Rating14 bar at 198ºC32 bar from -10 to 100ºC

Test PressureEach valve is individually hydrostaticallytested to BS EN 12266at the following test pressures.Shell: 30 barSeat: 22 bar

SpecificationRising stemThreaded bonnetOne piece wedgeBronze trimTaper thread BS EN 10226 (BS 21-ISO 7)Complies with BS EN 12288

Satura

ted

Stea

m

0 40 80 120 160 200 240 Temperature ˚C

28

24

20

16

12

4

0

Pre

ssur

e ba

r

8

32

36


Specification




Stem (1/4 to 2”) Bronze 1982 CC491K

(21/2”) AL. Brass (CA12) 12163 CW301G

(3”) Bronze 1982 CC491K


Packing Ring Asbestos Free WRAS Listed & Approved

Gland Brass 12164 CW614N

Packing Nut (21/2 & 3”) Brass 12164 CW721R

Packing Nut (1/4 to 2”) Brass 12164 CW614N

Handwheel Aluminium

Identification Plate Aluminium

Handwheel Nut Brass 12164 CW614N

Dimensions

Nominal Size in 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3

A mm 46 46 51 55 63 71 73 83 108 117

B Open mm 129 129 133 162 191 223 253 307 374 436

C mm 60 70 70 80 85 95 105 120 140 180

Weight kg 0.35 0.40 0.50 0.75 1.30 1.70 2.60 3.50 6.00 8.80

Fig. 609

Bronze Gate ValvePN32 - Series B

A

B

C


Bronze Gate Valves - · PDF file04.06 All Hattersley bronze gate valves are inside screw pattern with either rising stem or non-rising stem configuration. The majority of the range

Documents