BROCHURE_SKLP

Keep Your Trust

MINING INDUSTRY OIL AND GAS CEMENT INDUSTRY

PULP & PAPER

POWER PLANT

PETRO CHEMICAL

REFINARY

PT. SUMBER KARYA LESTARI PRATAMA

Jl. Patriot No. 116 C, Jakasampurna

Bekasi 17145

Telp. (021) 889 56466

Fax. (021) 889 56467

Email : [email protected]

[email protected]

Website : www.sklp.co.id

PT. Sumber Karya Lestari PratamaWas estabilished in 2009 in Jakarta as private

company with company registration number:

AHU-07249.AH.01.02 and NPWP No.

02.885.719.1-034.000

We offer comprehensive, Cost effective high

solutions as a general contractor/ Pipe-

Flange-Fitting-Valve supplier in Indonesia,

Focusing on Oil and Gas, Petrochemical,

Cement Industry, Power Plant and Pulp &

Paper.

VISION

Strengthen our service quality by improving,

implementing, evaluating, and maintaining

the qulity management system improvement

and strive in excellent for best practice.

MISSION

• To Provide quality product and service while

meeting customer requirements.

• To Provide competitive price and commited

for on time delivery services.

MINING INDUSTRY

OIL AND GAS

CEMENT INDUSTRY

PUPL AND PAPER

POWER PLANT

PETROCHEMICAL

REFINARY

Email : [email protected]

[email protected]

Website : www.sklp.co.id

SUPPLY PRODUCTS

Fitting, Valve, Pipe Duplex Supply

Customer: CONOCOPHILLIPS

Valve’s Supply

Customer: SAE

Belt Brush Conveyor

Customer: RAPP

Casting Filter Oil Casting

Customer: BPSA

Fabrication Generator Base

Customer: BPSA

Heat Exchanger Part

Customer: SELDAVINTO

Valve’s Supply

Customer: PT. SAE

Gate Valve Recondition 48”#150

Customer: Geothermal

Brake Container Crane

Customer: RAPP Port Buatan

Rebuild Conveyor Screw

Customer: TelPP

Loose Gear Box Crane

Customer: RAPP

Recondition Gearbox Agitator

Customer: Kujang

Adjuster Bolt HDG

Customer: Berau Coal

Roll Pulley SBR

Customer : PKN Kaltim

PROJECT

This PRESS MACHINE is a machine that has a very

good quality and have optimal performance.

This machine offers a minimum price but maximum result, so

it can provide substansial benefit for customer.

This machine made by experts and designed very carefully

according to ASME standard.

(KICI Indonesia)

FOUNDATION RAIL is the cradle for the engine

generator made with a standard based on ASME. Created

by experts and has the strength and assurance of high

quality products.

Combining raw material between carbon steel and wear

resistance plate material, and process welding by FCAW

complete with WPS, PQR and ITP documentation.

Machinery process by CNC HBM then produce high

precision products.

(BPSA / PLN Lombok)

Casting, machining and assembly of CRUSHER

SCREEN. Made from manganese casting to

improve quality and add optimal performance.

Diamond type HEAD PULLEY, shell of pulley

made from seamless pipe, flanges from material

carbon steel grade S45C, and shaft material alloy

grade 4340. Covered by SBR shore 60 for finish.

As an agent EDV Valves of UK we

capable to supply ball valve, check

valve, globe valve with range of size

1”-24” ASME #150-#2500 with

various of connection and we

concentrated on F51 / F55 Duplex

and super duplex NACE MR 0175

With full support from our principal in

Europe SKLP capable and widely supply

of :

- Fittings (elbow, tees, cap,etc)

- Bar material

- Branch fitting (weldolet, sockolet,

threadolets, plug, etc.)

- Flange (WN, SO, SW, threaded,

bleeder type) to ASME and API std.

Duplex and Super Duplex

UNS Grade S31803-S32205-S32750

FLANGES & FITTINGFLANGES & FITTINGFLANGES & FITTINGFLANGES & FITTING

As an agent Petropipe International

of UK, SKLP already widely supply

seamless and welded pipe

with range of size 1”-12” DSS SMLS

A790 UNS Duplex and Super Duplex

UNS Grade S31803-S32205-S32750

NACE MR 0175

PIPEPIPEPIPEPIPE

DUPLEX VALVEDUPLEX VALVEDUPLEX VALVEDUPLEX VALVE

PROJECT

ID FAN

Made from wear resistance materials with

grade 400, rolling process use special

methods, welding by FCAW and finishing

by CNC Vertical Milling

EQUALIZING BIN TANK

SPROCKET DECK

Made from carbon steel and wear

resistance plate grade 500.

diameter 4000 mm and high

5200mm.

It used for wood chipper storage.

Made from forging materials 17CrMo6

and threatment surface induction after

machining process, the sprocket cut into

two parts by CNC wirecut.

Installed on slasher deck and used to

pull the woods to barking drum.

PROJECT

DISC CHIPPER

Recondition disc chipper and replacement

shaft. Rebuild disc by FCAW and welding

wire which compatible specification. Re-

tapped and install recoil on bolting holes.

GATE VALVERecondition flanges facing, rebuild by

FCAW and machining gate disc on VTL

CNC machine. Replace new rod screw

by allow steel material and finishing

grinding.

PROJECT

VESSEL

GEAR BOX

Maker various type of gears and

recondition gearbox :

SOP of reconditon :

• Propose recommendation

• Recondition housing

• Recondition bearing seat

• Machining gears

• Grinding gears

• Treatment

• Assembling

• Testing without load

• Proper packaging

As PHE agent which complete

with U, S & US ASME

certification we capable to

make various of Vessel & tank :

• Vessel non pressure

• Pressure Vessel

• Heat Exchangers

• Column, chimney

• Ducting

• etc.

We are official marketing agent for Perkasa Heavyndo Engineering, SKLP to manufacture

various of job.

MACHINE FACILITIES

No. MACHINE TYPE CAPACITY

1 CNC Horizontal Boring M/c SKODA - UK 12,000x3,800x1,600 mm

(x,y,z)

2 CNC Boring M/c SKODA W 160 HA - UK 10 m x 3 m x 1.6 m

(L x W x H)

3 CNC Boring M/c SCHEISS FRORRP 10 m x 4.5 m x 1.2 m

(L x W x H)

4 Horizontal Boring M/c SKODA W 166 H 6 m x 3.5 m x 1.6 m

(L x W x H)

5 Horizontal Boring M/c ASQUITH 10 m x 4.2 m x 1.0 m

(L x W x H)

6 Vertical Boring M/c CRAVEN 7700 mm(Dia.) x 4000 mm (H)

Weight : 150 Tonnes

7 CNC Lathe CRAVEN 30 Feet 2 m x 9 m

Weight : 90 Tonnes

8 Conventional Lathe CRAVEN 2 m x 7.5 m

Weight : 90 Tonnes

9 Conventional Lathe Heylegensteadt SP Facing

Lathe

2.2 m x 3.5 m

Weight : 50 Tonnes

10 CNC Flame Cutting M/c ESAB 18000 mm x 2500 mmx 75 mm

(L x W x Thk)

11 Shearing M/c Mariani 2500 mm x 25 mm

12 PWHT Furnace PWHT Furnace • Stress Relieving :

22 m(L) x 5.5 m(W) x 5.5 m(H)

• Annealing :

12.5 m(L) x 5.5 m(W) x 2 m(H)

MACHINE FACILITIES

Located in Cengkareng, West Jakarta and Bekasi West Java

where our supporting workshop are dedicated to running

the activities

No

.

TOOLS NAME BRAND SIZE

1 CMM PORTABLE CIMCORE 2800 mm

2 HIGH GAUGE (DIGIMARE CX1) MAHR 24”

3 HARDNESS TESTER GNEHM HRD 150

4 HARDNESS TESTER PORTABLE TIME HRC/HRB

5 VERNIER CALIPER MITOTUYO 0-1500 mm

6 DEPTH CALIPER MITOTUYO 0-200 mm

7 OUTSIDE MICRO MITOTUYO 0-400 mm

8 INSIDE MICRO MITOTUYO 8-100 mm

9 MODUL RADIUS MITOTUYO 8-100 mm

10 BORE GAUGE MITOTUYO 160-235 mm

11 MEASURING PROJECTOR CARMAR 50x150 mm

TOOLS FACILITIES

No

.

MACHINE TYPE CAPACITY

1 CNC Turning TURN 20 - Japan 200 x 500 mm

2 Vertical Machining Center WF3-12K -Germany 750 x 1200 x 2000mm

3 CNC Wire Cut AQ 325 L - Japan 220 x 250 x 350 mm

4 CNC EDM CM 434 C - Taiwan 250 x 300 x 400 mm

5 Horizontal Lathe Geminis – Germany 1500 x 1200 mm

6 Surface Grinding TODH3 - Germany 600 x 2000 mm

7 Cylinder Grinding Naxos Union - Germany 500 x 3000 mm

8 Planner Milling R1200 - Taiwan 1200 x 4000 mm

9 Horizontal Shapping Dainichi - Japan 600 x 400 mm

10 Universal Frais / Mill Sajo/ Strong - Sweden 300 x 1250 mm