Wet abrasive cut-off machine BRILLANT 240 The BRILLANT 240 is a wet abrasive cut-off machine with fine dynamic and manual vertical wheel movement (chop cut) for samples up to Ø 95 mm and electromecanical lever brake. Tha automatic X-axis allows a precise pulsed cut and oscillation cut while the spacious cutting chamber gives various clamping variations. The solid aluminum design comes with openings on the right and left hand side for cutting long parts. BRILLANT 240 HORIZONTAL MOVEMENT The manual horizontal or automatic movement allows cutting long parts longitudinally and easy positioning of the sample below the cut-off wheel. In pulsed cutting mode the sample material is cut particularly gently. INTUITIVE CONTROL SOFTWARE The new control software with integrated, extensive maintenance menu makes the operation simple and comfortable. FINE DYNAMIC CUT-OFF With the manual cutting movement, the cutting force is regulated through a set of gears. The cut is thereby jerk-free and more precise. The easy-to-use lever brake fixes the cutting disc in any position. AUTOMATIC CROSS TRAVEL The automatic Z-axis can be adjusted with 0.1 mm precision for parallel cuts. INNOVATIVE DETAILS The sliding front door and the side door with safety interlock allow easy and optimal access to the cutting chamber, which is optimal illuminated by a LED lamp. The Quick-Change-System makes change of the cutting wheel quick and easy and simplifies maintenance. NEURTEK T. +34 943 82 00 82 [email protected]Rev.00 / Page 1 www.neurtek.com
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Wet abrasive cut-off machine B R I L L A N T 2 4 0
The BRILLANT 240 is a wet abrasive cut-off machine with
fine dynamic and manual vertical wheel movement (chop cut) for
samples up to Ø 95 mm and electromecanical lever brake.
Tha automatic X-axis allows a precise pulsed cut and oscillation
cut while the spacious cutting chamber gives various clamping
variations.
The solid aluminum design comes with openings on the right and
left hand side for cutting long parts.
BRILLANT 240
HORIZONTAL MOVEMENTThe manual horizontal or automatic movement allows cutting long parts longitudinally and easy positioning of the sample below the cut-off wheel. In pulsed cutting mode the sample material is cut particularly gently.
INTUITIVE CONTROL SOFTWAREThe new control software with integrated, extensive maintenance menu makes the operation simple and comfortable.
FINE DYNAMIC CUT-OFFWith the manual cutting movement, the cutting force is regulated through a set of gears. The cut is thereby jerk-free and more precise. The easy-to-use lever brake fixes the cutting disc in any position.
AUTOMATIC CROSS TRAVELThe automatic Z-axis can be adjusted with 0.1 mm precision for parallel cuts.
INNOVATIVE DETAILSThe sliding front door and the side door with safety interlock allow easy and optimal access to the cutting chamber, which is optimal illuminated by a LED lamp.The Quick-Change-System makes change of the cutting wheel quick and easy and simplifies maintenance.
Wet abrasive cut-off machine B R I L L A N T 2 4 0
BASIC MODULEBRILLANT 240
Order No.: M1822000» manual Y-axis with electromechanical lever brake» 7" Touch-Screen user interface with intuitive ATM user
software» automatic X-axis - manual travel via hand wheel» cutting-force dependent feed control (X-axis)» superior LED illumination of cutting chamber» parallel setting of wheel guard during cutting sequences
increases cutting capacity» opening on both sides for long parts