World Leaders in Digital TV Distribution Breaking Barriers TELEVES HEAD OFFICE Rúa B. de Conxo, 17 , 15706 Santiago de Compostela, SPAIN Tfno. 981 52 22 00 Fax 981 52 22 62 E-mail: [email protected]TELEVES ELECTRONICA PORTUGUESA Via . Dr Francisco Sa Carneiro. Lote 17. ZONA Ind. MAIA 1. Sector-X MAIA. C.P. 4470 BARCA, PORTUGAL Tfno. 351 22 9418313 Fax 351 22 9488719/9416180 E-mail: [email protected]TELEVES UNITED KINGDOM LTD Unit 11 Hill Street, Industrial Estate CWMBRAN, GWENT NP44 7PG. UNITED KINGDOM Tfno. 44 01 633 87 58 21 Fax 44 01 633 86 63 11 E-mail: [email protected]TELEVES FRANCE S.A.R.L. Parc des Arpents 12 Rue du Pré des Aulnes. 77340 PONTAULT-COMBAULT. FRANCE Tfno. 33 01 60 18 30 40 Fax 33 01 60 18 30 49 E-mail: [email protected]TELEVES MIDDLE EAST FZE P.O. Box 17199 JEBEL ALI FREE ZONE DUBAI, UNITED ARAB EMIRATES Tel. 9714 88 343 44 Fax. 9714 88 346 44 E-mail: [email protected]Miembro de número del ER 224/1/94 Empresa Registrada Empresa Patrocinadora www.televes.com New Products Release
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
World Leadersin Digital TV Distribution
BreakingB a r r i e r s
TELEVES HEAD OFFICERúa B. de Conxo, 17 , 15706 Santiago de Compostela, SPAIN Tfno. 981 52 22 00 Fax 981 52 22 62 E-mail: [email protected]
TELEVES ELECTRONICA PORTUGUESAVia . Dr Francisco Sa Carneiro. Lote 17. ZONA Ind. MAIA 1. Sector-X MAIA. C.P. 4470 BARCA, PORTUGALTfno. 351 22 9418313 Fax 351 22 9488719/9416180 E-mail: [email protected]
TDT’s are the ideal solutionfor distributing digital sate-llite television in MDU’s.
QAM technology allows asatellite dish to be sharedby a great number of vie-wers and there is no needfor costly rewiring of thebuildings’ network.
Adjacent channel operation.In/out loop-throughAvailable for hyperband or UHF bands.Independently microprocessorcontrolled modules.Portable programming unit.16, 32, 64, 128 QAMProgramming access code
Ref. Description
MATV Headend
Reference 5077
Front-End
In/out connector F-female
Freq. range MHz 950 to 2150
Input level dBm –65 to –25
LNB power Vdc 13 (selectable ON/OFF)
Symbol rate Mbaud 10 to 30
Frequency steps MHz 1
Lock-in range MHz ±5
SR capture range Kbaud ±100
General
Working temp °C –10 to +45
RF output
In/out connector F-female
Bandwidth MHz 47-860
Ouput level dBµV 80
Impedance Ω 75
RTL dB >12
Free to air channels
SR: 10 to 30 Mbaud
Our professional unit for MDUconsists of a QPSK demodula-tor front-end which can handlesymbol rates from 10 to 30Mbps.
TECHNICAL SPECIFICATIONS
Digital Receiver (QPSK-NTSC)
A product specially thought forthe reception of free to airdigital transponders withapplications in MDUs, hotelsand other large buildings. Thecompact unit demodulates theQPSK signal and outputs a
TV channel which is selectedby the user among all thechannels within the digitaltransponder. It is an expanda-ble system due to the modulardesign and its input and out-put are loop-through.
All the connections are made at thefront of the units.
Single channel amplifiers 1 input-2 outputs without A.G.C.
Reference 5596* 5598* 5591*
Channels 2 to 4 5 to 12 21 to 69
Gain (dB) 54
Max. output (dBµV) > 127 >125 >124
level (dBm) +18 +16 +15
Consumption (mA) 145 145 135
*Specify channel
Single channel amplifiers 2 input-2 outputs without A.G.C.
Reference 5613* 5614* 5648*
Frequency range (MHz) 47 -68 174-230 470-862
Gain (dB) 54
Max. output (dBµV) > 127 >125 >124
level (dBm) +18 +16 +15
Consumption (mA) 155 160 155
*Specify channel
Single channel amplifiers 2 input-2 outputs with A.G.C.
Complete range of singlechannel amplifiersUp to 127 dBµV output level 1 and 2 inputsAGC models available19” rack compatibleSwitched mode power supplyDouble stage attenuation system
Complete range of single channel amplifier systems easy expandable due to their loop-through output connectors.They allow selective amplification to overcome most of the interference problems. These systems have been designed using the state-of-art technology providing greater reliability and stability.
5307 Support 6 mod T93/STAR5306 Support 8 mod T93/STAR5304 Support 10 mod T93/STAR5369 Rack front transparent cover8250 STAR/T93 rack for 19” cabinets.
4213 Interconnecting link4216 Line power stop5951 Terminal load 75 ohms
ACCESSORIES
Ref. Description
I.F. Amplifier
Test(-30dB)
C. Amplif. F.I.
SalidaOutput
2345
89R
ef. 5
374
F.I. / I.F.+13/17V=
(300 mA)
MATV
+24V=
(60 mA)
-20 0dB -12
0dB
Serie
Drop Amplifiers
IF Amplification
Compact headends for MATVinstallations.Line extenders.Split-band amplification avoidsVHF -UHF intermodulation.
Zinc diecast chassis with Fconnectors (kompact series). Low consumption selfpoweredamplifiers featuring differentnumber of input ports.
High band selectivity.Fully shielded in compliance with the CE.Excellent VHF / UHF equalisation, theyincorporate an external test socket.
New format in shielded zamakhousing and a reduced size.
Increased output powering andsloped gain for the perfect equalisa-tion of the signals.
LNB commutable powering toselect the polarity of universal LNB's.
Active attenuator controlled byPIN diodes which once adjusted,affects the noise figure on a smallerscale than that of a conventionalattenuator.
Reference 5384 5385 5386 5381 5320 5321
No. of inputs 5 1 5 5 5 5
Amplified bandB1/B3-FM
47-422/UBI/FM-B3 FM-BI/B3 BI-BIII-BIV-
B4-B5-U B4-B5-U U-Ua-Ub* BV-UHF
Gain VHF (dB) 49 49 34 49 32 40
UHF (dB) 53 54 40 54 33 43
Max. Out. VHF(dBµV) 118 119 114 119 114 118
Level(dBm) +9 +10 +5 +10 +5 +9
UHF(dBµV) 122 124 114 124 114 122
(dBm) +13 +15 +5 +15 +5 +13
N.F. VHF (dB) <6 <6 <5 <6 5 5
UHF (dB) <8.5 <6 <8.5 <8.5 <8.5 <7.5
Variable gain (dB) >20 >20 >20 >20 >20 >20
V-U Rejection (dB) >20 - >20 >20 >20 >20
U-U Rejection (dB) >13 - >13 >13 >15 >15
Max. preamp. current (mA) 100 250 60 250 50(12V) 50(12V)
AC consumption (VA) 20 20 9 20 9((W) 23(W)
Test socket yes yes yes yes yes yes
TECHNICAL SPECIFICATIONS
5384 5 inputs : High. power5385 1 input : High power. 5386 5 inputs : Low power5381 5 inputs : High power. 5320 5 inputs : Medium power5321 5 inputs : High power5374 IF amplifier. Minikom
PRODUCT RANGE
Ref. Description
* Programmable Ua-Ub (portable programming unit ref.7234)
Ref
. 537
923
4 54
5
CATV Amplifier
Test sal.Test out Salida
Output(-30dB)
Amplificador CATV
Ref
. 536
023
4 55
6
Split Band Amplifier
SalidaOutput
Central Amplificación Separada
Test(-30dBc)
FM-20 0
BI / BIII-20 0
UHF-20 0-20 0-20 0
UHF
Ref
. 537
923
4 54
5
CATV Amplifier
Test sal.Test out Salida
Output(-30dB)
Amplificador CATV
Ref
. 536
023
4 55
6
Split Band Amplifier
SalidaOutput
Central Amplificación Separada
Test(-30dBc)
Reference 5374
No. of inputs 2
Bands/input950…2200-
47…862
RF through losses (dB) <1.5
Gain (dB) 30…45
Equalizer (dB) 0…12
Attenuator (dB) 0…20
Max. output level (dBµV) 124
(dBm) +15
N.F. (dB) <10
13/off/17 Vdc for LNB (mA) 300
Automatic DC bypass (Vdc)24
(60mA max)
TECHNICAL SPECIFICATIONS
Home Amplifiers
References 5520 5521
Forward path (MHz) 87.5-862 47-862
Return path (MHz) 5 - 65 5-30
Gain (dB) 12 - 22 12-22
Output level(dBµV) 108 108
(dBm) -1 -1
Noise figure (dB) <7 <7
Attenuation margin (dB) 0 - 12 0-12
TECHNICAL SPECIFICATIONS
References 5510
IF Band (MHz) 950-2300
MATV Band (MHz) 47-862
IF Gain (dB) 20-30
MATV Gain (dB) 15 (reg.)
Output level
IF (dBµV) 109
(dBm) +0.5
MATV (dBµV) 100
(dBm) -9
Noise figure (dB) <8
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
References 4384
No. of outputs 2
Frequency (MHz) 47…400/470…860
Gain (dB) VHF 13
UHF 26
Max. output VHF 95
voltage (2ch.)(dBµV) UHF 103
Mains (Vac) 110
Connectors F
TECHNICAL SPECIFICATIONS
References 5371 5372
No of outputs 6+1 7+1
VHF Band (MHz) 47-230 47-230
UHF Band (MHz) 470-862 470-862
UHF Gain (+1Output) (dB) 24 24
UHF Gain (dB) 13 13
VHF Gain (+1Output) (dB) 17 17
VHF Gain (dB) 6 6
Return losses (dB) ≥10 ≥10
Rejection between outputs (dB) ≥18 ≥18
Noise figure (dB) 2.5 2.5
Output level(+1 output) (dBµV) 101 101
(dBm) -8 -8
Output level(dBµV) 89 89
(dBm) -19.5 -19.5
Front-End
In/out connector F-female
Freq. range MHz 950 to 2150
Input level dBm –60 to –30
LNB power Vdc 15 or off
Symbol rate Mbps 2 to 40
General
Interface DVB-CI
Working temp °C –10 to +45
External port RS -232 (data & control)
Video
Frequency MHz 0.25 to 5.0
Group delay ns ± 20
Differential gain % <1
Differential phase ° <0.5
Signal to noise ratio dB >60
Our professional unit forSMATV and CATV consistsof a SCPC / MCPC front-end which can handle sym-bol rates from 2 to 40 Mbps.
The DVB common interfaceaccepts CAM’s for Viaccess,Cryptoworks, Nagravision,Conax etc.
Located at the rear are the connectors for the modula-tor, LNB input with loopthrough and the slot for theCAM module.
Common InterfaceSCPC/MCPCSR: 2–40 MbpsVBI text reinsertedRS-232 data port
TECHNICAL SPECIFICATIONS
Digital Receiver (QPSK-AV)
Reference 5077
Front-End
In/out connector F-female
Freq. range MHz 950 to 2150
Input level dBm –65 to –25
LNB power Vdc 13 (selectable ON/OFF)
Symbol rate Mbaud 10 to 30
Frequency steps MHz 1
Lock-in range MHz ±5
SR capture range Kbaud ±100
General
Working temp °C –10 to +45
RF output
In/out connector F-female
Bandwidth MHz 47-860
Ouput level dBµV 80
Impedance Ω 75
RTL dB >12
Free to air chan-nels
SR: 10 to 30Mbaud
Our professionalunit for MDU con-sists of a QPSKdemodulator front-end which canhandle symbolrates from 10 to 30Mbps.
All the connectionsare made at the front of theunits.
Agile frequency/channeloutput
Wall or 19” rack mounting
Both RF and A/V outputs
Programming access code
TECHNICAL SPECIFICATIONS
Digital Receiver (QPSK-PAL)
A product specially thought forthe reception of free to air digitaltransponders with applicationsin MDUs, hotels and other largebuildings. The compact unitdemodulates the QPSK signaland outputs a TV channel whichis selected by the user amongall the channels within the digitaltransponder. It is an expandablesystem due to the modulardesign and its input and outputare loop-through.
Easy RF output channel selectionby means of universal program-mer.
Microprocessor controlled PLL
Adjustable output voltage level
FEATURES
Typical application
Ref. Description
Modulator units
5844 Mono
5845 Stereo
SYSTEM PRODUCTS
Any RF channel within the fre-quency range from 47 up to 860MHz may be selected with onereference only.
All available functions mayeasily be programmed by the userinto the unit by means of the uni-versal programmer.
Easy maintenance due to the
modular structure of its design.A SAW filter guarantees high
stability and the use of adjacentchannels.
To be used in TV closed circuits,signals from video recorders, sur-veillance systems and satellitereceivers which do not incorporateany kind of modulation.
One reference covers the wholeband from 47 to 860 MHz.
Easy expandability due to loop-through output.
All TV standards available ondemand.
19” rack compatible.
Mono/stereo on demand
Ref. Description
VCR
Agile Processors
PROGRAMMING UNIT PCT 3.0
Input frequency range (MHz) 470 to 860
Output frequency range (MHz) 470 to 860
In-Out frequency offset (KHz) ± 166.667
Input level range (*) (dBm) -20 to -70
Automatic Gain Control (AGC) yes
Unit output level (programmable)(dBµV) 70 to 85
(dBm) -38 to -23
System output level (dBµV) 108
(For 6 processors) (dBm) -1
Max. analogue adjacent Ch. level (dBm) - 15
Flatness within multiplex (dB) ≤3
In-Out return losses (dB) > 10
Connector type F
Power Supply Unit
Mains voltage (Vac) 110 ± 20%
Output voltage (Vdc) 15 and 5
Broadband Amplifier
Frequency range (MHz) 47 to 860
Gain (dB) 45 ± 2
Variable gain (dB) 20
Nominal output level (dBµV) 115
(dBm) +6.5Output level (dBµV) 108
(For 6 Processors) (dBm) -1
Connector type F
Powering (Vdc) 15
Consumption at 15 Vdc (mA) 400
Output test socket yes
Technical Specifications.- DTT Channel Processor Technical Specifications.-PSU and Amplification
PS
U
34 C
H. P
roc.
29 C
H. P
roc.
BroadbandAmplifierRef. 4512
PRO 45
Output
CH
. Pro
c.
CH
. Pro
c.
CH
. Pro
c.
CH
. Pro
c.2
2
23
24
25PS
U
Ref. 5379
234 545
CATV Amplifier
Test sal.Test outSalida
Output (-30dB)
Amplificador CATV
Ref
. 538
223
4 55
4
I.F. Launch Amplifier
47-862 MHz(24 Vdc)
SalidaOutput
Central Amplificadora F.I.
Test(-30dBc)
950-2150 MHz(15 Vdc)
-20 0
Televés Headend using seven channel processors and broadbandamplifier
TYPICAL APPLICATION
Input - Output Frequency Agile
On Board Measuring Facility
Microprocessor Controlled Modules
Two SAW filters to Ensure Proper Channel Rejection
Automatic Gain Control (AGC)
Portable Programming Unit for:In-Out Frequency Channel SelectionIn-Out Frequency Offset Selection
SYSTEM PRODUCTSHow it works: Example of IF band customisation for EUTELSAT and ASTRA satellites
Processor
Input frequency (MHz) 950 to 2150
Input level (dBµV) 54 to 84
Output frequency (MHz) 950 to 2150
Output level (dBµV) 89 ± 5
Launch amplifier
Input frequency (MHz) 950 to 2150
Gain (dB) 25 to 30
Max. out. level (dBµV)115
(DIN V VDE 0855 Part 12)
Power Supply Unit
Mains voltage (Vac) 230 ± 20 %
Output voltage (Vdc) 5 and 15
TECHNICAL SPECIFICATIONSFlexibility for present andfuture programmes; for pre-sent and future distributionnetworks.Modularity to be fully expan-dable, programme by pro-gramme.Simplicity by using only asingle cable for distributingthe selected satellite TV pro-grammes.Digital transparency for pre-sent and future satellite digi-tal TV transmissions.
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
Spif
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
- +
ON
- +
ON
- +
ON
CC
Vertical Polarisation:All Ch. not processed
Horizontal Polarisation:3 Ch. processed
Vertical Polarisation:1 Ch. processed
Horizontal Polarisation:2 Ch. processed
Vertical Polarisation:2 Digital Ch. processed
Horizontal Polarisation:2 Ch. processed
Free band
20 dB over
15 dB over
ASTRA +
6 coaxial cables from dishes Single cable for IF distribution
15 dB over 20 dB over 2
Cases when there is no free band
2
Adjacent channels are interferred
Overlaped channel is ignored
Ref. Description
IF/IF Processors7230 Digital IEC connectors7231 Digital F connectorsAmplifiers7303 IF launch amplifier
950-2150 MHz IEC connectors
7214 IF launch amplifier 950-2150 MHz F-connectors
7216 IF launch amplifier 950-2150 MHz F-connectors two IFinputs
Power supply units7305 230 Vac IEC connectors7222 230 Vac F connectors
Mounting accessories7304 IF combiner IEC connectors5184 IF combiner F connectors7232 Programming unit PCT 2.05241 Wall mounting rail4213 Interconnecting link5951 Terminal load 75 Ω4061 F type terminal load 75 Ω5303 Lockable cabinet
Application with an external launch amplifier
T94
Telev
és
~=
T94
UHF
Telev
és
T94
UHF
Telev
és
T94
UHF
Telev
és
T94
UHF
Telev
és
T94T94
UHF
Telev
és
T94
UHF
Telev
és
T94
UHF
Telev
és
T94
UHF
Telev
és
IF SAT Channels+Terr.
Terrestrial channels
IF SAT Channels
Ref. 7304
105
315
MezcladorF.I.
ONCENTRAL
ON - OFF
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
- +
ON
CC
- +
ON
CC
- +
ON
CC
- +
ON
CC
- +
ON
CC
- +
ON
CC
- +
ON
CC
FA15 5
~=
ONCENTRAL
ON - OFF
7305
- +
ON
CC
IF Launch Amplifier
Terrestrial Headend IF/IF Processors Headend
Ref
. 537
923
4 54
5
CATV Amplifier
Test sal.Test out Salida
Output(-30dB)
Amplificador CATV
Ref
. 538
223
4 55
4
I.F. Launch Amplifier
47-862 MHz(24 Vdc)
SalidaOutput
Central Amplificadora F.I.
Test(-30dBc)
950-2150 MHz(15 Vdc)
-20 0
DistributionIF to IF Channel Processors. Single cable distribution
Multiswitches. 3 or 5 wire distribution
Comprehensive line of pro-ducts for any application.
Suitable for the reception ofthe full program variety of ana-logue and digital satellite pro-grammes.
The high efficiency of this typeof distributions allows connec-ting many subscribers.
Diecast housing in full com-pliance with CE regulations.
7270 3W thru splitter multiswitch7271 3W end splitter multiswitch7272 3W distribution amplifier7273 5W thru splitter multiswitch7274 5W end splitter multiswitch7275 5W distribution amplifier
RACKS AND WALL SUPPORTS
Ref. Description
Reference 7270 7271 7272
Frecuency range (MHz) 47-862 950-2400 47-862 950-2400 47-862 950-2400
Single channel amplifiers 1 input-2 outputs without A.G.C.
Reference 5596* 5598* 5591*
Channels 2 to 4 5 to 12 21 to 69
Gain (dB) 54
Max. output (dBµV) > 127 >125 >124
level (dBm) +18 +16 +15
Consumption (mA) 145 145 135
*Specify channel
Single channel amplifiers 2 input-2 outputs without A.G.C.
Reference 5613* 5614* 5648*
Frequency range (MHz) 47 -68 174-230 470-862
Gain (dB) 54
Max. output (dBµV) > 127 >125 >124
level (dBm) +18 +16 +15
Consumption (mA) 155 160 155
*Specify channel
Single channel amplifiers 2 input-2 outputs with A.G.C.
Complete range of singlechannel amplifiersUp to 127 dBµV output level 1 and 2 inputsAGC models available19” rack compatibleSwitched mode power supplyDouble stage attenuation system
Complete range of single channel amplifier systems easy expandable due to their loop-through output connectors.They allow selective amplification to overcome most of the interference problems.
These systems have been designed using the state-of-art technology providing greater reliability and stability.
5307 Support 6 mod T93/STAR5306 Support 8 mod T93/STAR5304 Support 10 mod T93/STAR5369 Rack front transparent cover8250 STAR/T93 rack for 19” cabinets.
4213 Interconnecting link4216 Line power stop5951 Terminal load 75 ohms
ACCESSORIES
Ref. Description
Digital / Analogue headend amplifier
AvantNEWProduct
Reference 5375
Number of inputs 7
UHF1: 56
UHF2: 57
Gain per channel (dB) UHF3: 57
/ inputs FM: 45
BI/BIII: 46
47-862MHz: 38 - 44
IF: 28 - 37
UHF: 121
Output level (2channels) (dBµV) VHF: 115
IF: 118
Regulation margin per channel (dB) 25
TECHNICAL SPECIFICATIONS
The new programmable ana-logue/digital headend amplifieris suitable both for terrestrialand satellite TV signals and isideal for SMATV installations.
The general characteristics ofthis new amplifier are:
Ease of installation.Easy to program with a largenumber of automatic func-tions.Capacity for 10 channels of
UHF + BIII/BI + IF + broad-band.High gain (up to 57 dB) andhigh output level (up to 121dBµv)
External programming unit.Switched-mode power supplyof low consumptionIt includes a signal test, which
facilitates its adjustment withoutinterrupting the installation servi-ce.
The inclusion in the launchamplifier of an amplification ofthe band of 950 to 2,150 MHz,of sloped gain, responds to thelatest installation needs, such asthe incorporation of communaldigital television, and reinforcesits use in SMATV distributions.
Equipo STAR
U1 U2
U3
FM BI/BIII FI
47-860
Frequency res-ponse of theAvant for f ivechannels shownby a spectrumanalyzer.
IF Distribution
New format in shielded zamakhousing and a reduced size.
Increased output poweringand sloped gain for the perfect
Reference 5374
Number of inputs 2
Frequency range MATV 47-862
(MHz) IF 950-2150
Gain(dB) IF 27-42
Trough losses (dB) MATV 1.5
Output level (dBµV) 120
Noise figure (dB) 9
Attenuation margin (dB) 0 -20
Equalization margin (dB) 0 -10
Powering IF.: 13 / 17 (300 mA)
(Vdc) SMATV: 2496 ( mA)
Output: 13/17 (60 mA)
Reference 7260
Frequency (MHz) 5-2.400
Trough losses (dB) <2
Rejection between inputs(dB0 ≥25
Power supply VDC 12-20
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
equalisationof the sig-nals.
LNB com-m u t a b l epowering toselect thepolarity ofu n i v e r s a lLNB's.
Activeattenuator
controlled by PIN diodes whichonce adjusted, affects the noisefigure on a smaller scale than
NewProduct
The adoption of the DiSEqCsystem as a standard permitscontrol over multiple input pos-sibilities.
Televés presents a newrange of products within IF dis-tribution which incorporatesthis switching system. Therange consists of 2 Multiswit-ches with 9 inputs and four oreight outputs respectively andone Multiswitch with 2 inputs.
The Multiswitchers allow thecomplete distribution of thetransponders of the two satelli-tes, making easier the mixingof the terrestrial signals.
DiSEqC Switches
Zinc diecast enclosure and Fconnectors.IF launch amplifiers includeMATV channels diplexing.
• Sloped gain.• Fully shielded.• Up to 2150 MHz.• Selectable12 or 18Vdc linepowering.
Reference 7485
Frequency range MHz 47...2150
IF gain (dB) 20
RF attenuation (dB) < 2,5
Max. output level (dBµV) 113
Consumption (mA) 60(15Vdc)
Max. current bypass (A) 1
TECHNICAL SPECIFICATIONS
MiniKomthat of a conventionalattenuator.
It incorporates amixing of the terrestrialchannels with poweringpossibilities and withminimum losses< 1.5dB.
It has an output testfor the verification ofthe system whichmeans that it is no lon-ger necessary to dis-connect it from the net-work to make measu-rements.
IF Amplifiers
Ref.7260
RECEPTOR DE SATELITERST 250 GRAPHICS
Hi-Fi StereoWEGENER PANDA
CANAL+FULL COMPATIBLE
Distribution Amplifiers & Line extenders
Intended for SCATV distribution net-works (Small and medium CATV net-works).Launch amplifier for individual andcommunal installations
Reverse path 5-30/5-55 MHz with varia-ble gain control.Local or line powering according toreferences.Incorporate both system and cableequalisers.Optional plug-in module for 36 dB gain.
References 4512-4511 4513 5390Fordward pathBandwidth (MHz) 47 to 862 87.5 to 862 47 to 862Flatness (dB) ± 1 ±1 ±1Gain (dB) 26/36 26/36 30/40Attenuator (dB) 0 to 20 0 to 20 0 to 20Cable equaliser (dB) 0 to 20 0 to 20 0 to 20System equaliser (dB) 0 to 20 0 to 20 0 to 20
The connectors represent oneof the smallest components in aninstallation, but this does notmean that they are not important.
They are found in all parts ofinstallations, from antennas tothe user's television set, and theyhandle signals with very differenttransmission levels.
Their shielding is importantboth when they work in high levelheadends, around 120 dBµv inorder to stop them from radia-ting, and when they work in lowlevel sockets, around 60 dBµV
when it is important that they arenot affected by interfering sig-nals.
Televes presents two new con-nectors which are characterisedby their manufacturing in zamak,which guarantees their shieldingin any given conditions.
In this new range of connectorsthe PRO connector stands out,which is characterised by its easyassembling to the coaxial cable,eliminating the concept of "mec-cano" which used to characterisethe traditional connector.
References 5430 5431 5432 5433 5441 5442 5443
Type diplexed T c/dc A c/dc B c/dc T A B
Trough losses TV (dB) - - 0.9 0.7 - 0.7 0.5
Tap losses TV (dB) 0.8 12 14 21 12 14 21
Trough losses IF (dB) - - 1.8 1.3 - 1.5 1
Tap losses IF (dB) 1.5 12 14 21 12 14 21
OUTLETS TECHNICAL SPECIFICATIONS
Designed for digital televi-sion distributions.Its very small size (52x52mm) facilitates its housing inmechanism boxes of100x100.Incorporation of a doublescrew saddle system, whichensures and facilitates itsconnections. Input/output layout whichmakes possible the mecha-nical compatibility with all
the series with the substitu-tion of one element in theexisting installation.Found in a zamak housingwhich ensures its immunityagainst electrical radiations,in accordance with the elec-tromagnetic compatibilitylaws.
High level of directivity, animportant characteristicwhen QPSK digital televi-sion signals are distributed.
Ref. 4132 - maleRef. 4133 - femaleRef. 4134- F male
Comprehensive range of coa-xial cables featuring excellentmechanical and electrical spe-cifications, for both RF andsatellite IF bands.Indoor and outdoor installa-tions.
RSD CAM Digital2-31 QPSKSCPC, MCPCDiSEqCC21…69 PAL I/B/GDigital DVB MPEG-2Mono, dual, stereo and joint-stereo2 scart connectors (TV, VCR)2 RCA connectors (A/V)14/18 V for LNBOSD 16 colors
RSD Digital1-45 QPSKSCPC, MCPCDiSEqCC21…69 PAL I/B/G, D/K,NTSC,MDigital DVB MPEG-2Mono, dual, stereo and joint-stereo2 scart connectors (TV, VCR)14/18 V for LNBCapacity 1000 channels
Ref.7255
T w onew amplifiersare incorporated intothis range of products.
The first is a broad-band amplifier of 47 to2,300 MHz particularlysuitable for the realisa-tion of analogical anddigital television distribu-tion within the home.
This amplifier is ofspecial use in buildingswith SMATV distributionwhere an increase inthe number of socketswithin the home is desi-red.
The second of theseamplifiers is particularlysuitable for SCATV net-works, as it incorporatesa return channel from 5to 65 MHz.
Domestic Modulator Domestic Amplifier
This is a modulator avai-lable in two models, onefor VHF and the other forUHF, which allows the dis-tribution of an audio andvideo signal modulatedthrough the interior insta-llation of the home. This isparticularly suitable for thedistribution of digital satelli-te TV signals to all the soc-kets available in thehouse.
Its main characteristicsare:
The selection of the out-put channel by means ofrotary switches
It permits the mixing of
terrestrial TV signals.
It is found in a plastic boxwith an attractive end appea-rance and of a reduced size.
References 5520
Forward path (MHz) 87.5-862
Return path (MHz) 5 - 65
Gain (dB) 12 - 22
Output level (dBµV) 108
Noise figura (dB) <7
Attenuation margin (dB) 0 - 12
TECHNICAL SPECIFICATIONS
234
568
Generador de tono 22 KHz22 KHz Tone generator
22 KHz
FI/DC + 22 KHz
Ref
. 743
3
FI/DC
FI = 950 ... 2150 MHz
DC = 12 ... 18V
Digitvés
Ref
. 537
923
4 54
5
CATV Amplifier
Test sal.Test out Salida
Output(-30dB)
Amplificador CATV
Ref
. 538
223
4 55
4
I.F. Launch Amplifier
47-862 MHz(24 Vdc)
SalidaOutput
Central Amplificadora F.I.
Test(-30dBc)
950-2150 MHz(15 Vdc)
-20 0
References 4385
IF Band (MHz) 950-2300
MATV Band (MHz) 47-862
IF Gain (dB) 20-30
MATV Gain (dB) 15 (reg.)
Output levelIF (dBµV) 109
MATV (dBµV) 100
Noise figure (dB) <8
TECHNICAL SPECIFICATIONS
References 5855 5856
Output band VHF(*) UHF (21 - 69)
Output level (dBµV) >72 >72
Through frequencys (MHz) 47-862 47 - 862
Trough gain (dB) 5 5
TECHNICAL SPECIFICATIONS
47 - 2.300 MHz
Digidom I/R Digidom A/V
The Digidom A/V equipmenttransmits an audio and videosignal at the same time as theinfrared signal of the remote.The basic use for this equip-ment is to be able to radiate sig-nals to a television set situatedin another area in the house.
The Digidom IR equipmenttransmits the signal to theremote control via the radiofre-quency. This device permitscontrol over the VCR and sate-llite receiver from any room inthe house.
RF wireless loudspeakersystem that offers com-plete freedom to placethe loudspeakers whereever you wish, as they donot have to be connecteddirectly to the amplifier.Wide coverege area thatcan receiver well at a dis-tance of up to 100 m.DBB system 3D surroundsound technology .Output level 30 W+30 W(PMPO), ideal for stereohi-fi equipment, TV,VCR, sat receivers etc.
Ref.7314Wireless loudsepeaker RF complement for the refe-rence 7313.
Ref.7319Wireless loudsepeaker RFcomplement for the reference7316.
Wide coverege area thatcan receiver well at a dis-tance of up to 100 m.SRS system 3D surroundsound technology .Extraflat design to wallmounting.Output level 50 W+50 W(PMPO), ideal for stereohi-fi equipment, TV, VCR,sat receivers etc..
Wide coverege area that canreceiver well at a distance ofup to 100 m.Stereo reception