BRASS 1-800-569-0810 www.buyfittingsonline.com 71 BRASS FITTINGS COMPRESSION • Typical Application Use with copper, aluminum and thermoplastic tub- ing. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Not recommended for application using gas- eous media. •Pressure See table above for working pressures at 73 o F. •Vibration Fair resistance - use long nut when greater vibration resistance is needed. •Temperature Range -65 o F to +250 o F (-53 o C to +121 o C) range at maximum operating pressures. (Refer to tubing temperature range.) •Used With Aluminum, copper, brass and plastic tubing. Plastic tub- ing requires insert. Not recommended for steel tubing. • Tolerance +/- .02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. • Conformance Meets specifications and standards of ASA, ASME and SAE. •Assembly Instructions 1- Cut tubing to desired length. 2- Slide nut and then sleeve on tube. Threaded end “A” of nut must face toward fitting. 3- Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder. 4- Lubricate threads and assemble nut to fitting body. 5- Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart below. • “L” at the end of a Part# means Light Pattern -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. Actual Profile of Compression Threads Tube Size Additional Turns from Hand Tight 1/8" thru 1/4" 5/16" 3/8" thru 1" 1-1/4" 1-3/4" 2-1/4" Tube O.D. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 Thread Size-B 5/16-24 3/8-24 7/16-24 1/2-24 9/16-24 5/8-24 11/16-20 13/16-18 1-18 1-1/8-18 Working Pressure 400 400 300 300 200 200 200 150 100 75 These are NOT Lead Free See pages 161-169 for Lead Free products COMPRESSION FITTINGS • Steel and SS Compression Fittings on pages 441-443
17
Embed
BRASS FITTINGS COMPRESSION COMPRESSION FITTINGS · BRASS 1-800-569-0810 71 BRASS FITTINGS COMPRESSION • Typical Application Use with copper, aluminum and thermoplastic tub-ing.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BRA
SS
1-800-569-0810www.buyfittingsonline.com
71
BRASS FITTINGS COMPRESSION
• Typical ApplicationUse with copper, aluminum and thermoplastic tub-ing. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Not recommended for application using gas-eous media.
•PressureSee table above for working pressures at 73oF.
•VibrationFair resistance - use long nut when greater vibration resistance is needed.
•Temperature Range-65oF to +250oF (-53oC to +121oC) range at maximum operating pressures. (Refer to tubing temperature range.)
•Used WithAluminum, copper, brass and plastic tubing. Plastic tub-ing requires insert. Not recommended for steel tubing.
• Tolerance+/- .02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical.
• ConformanceMeets specifications and standards of ASA, ASME and SAE.
•Assembly Instructions1- Cut tubing to desired length.2- Slide nut and then sleeve on tube. Threaded end “A” of nut must face toward fitting.3- Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder.4- Lubricate threads and assemble nut to fitting body.5- Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart below.
• “L” at the end of a Part# means Light Pattern -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications.
16-117 1/8” x * 0.62 0.43 0.02 ----16-118 1/8” x 1/8” 0.62 0.43 0.02 ----16-119 3/16” x 1/8” 0.69 0.43 0.02 ----16-121 1/4” x 1/8” 0.75 0.50 0.04 ----16-122 5/16” x 1/8” 0.89 0.56 0.04 ----16-123 3/8” x 1/4” 0.84 0.62 0.06 ----
NUT
MALE ADAPTER
DOUBLE COMPRESSION THREADED SLEEVE FITTINGS
* 1/4 - 28 Male Thread Tapered.
• Use with aluminum and copper tubing or plastic tubing with internal tube support. Not recommended for steel tubing.• Easy to assemble, no flaring, two piece construction. • For use on oil, air, water and grease lubrication systems.• When design makes a dimension critical, contact us for information.
BRASS FITTINGS AIR BRAKE - SPLIT SLEEVE/ ACCESSORIES
BRASS SPLIT SLEEVE D.O.T. FITTINGS (5/32 O.D.)
COLLET
NUT
DOUBLE END UNION
CONNECTOR WITH NUT AND SLEEVE
ELBOW
Ideally suited for use in passive protected air transmission applications. A specially designed slotted sleeve helps elimi-nate notch stress related to over torque.
APPLICATIONS: Used with SAE J844 Type A nylon tube in pressure protected air transmission applications.TECHNICAL DATA: Maximum working pressure up to 150 PSI. Fittings will withstand variations from -40°F to +220°F (-40°C to + 104°C)
TRANSMISSION BRASS FITTINGS
Part # Tube O.D. List Price38-711 5/32" ----25-001 1/8" ----
Part # Tube O.D. List Price38-732 5/32" ----25-033 1/8" ----
Part # Tube O.D. List Price38-761 5/32" ----25-062 1/8" ----
Part # Tube O.D. Pipe Thread List Price38-718 5/32" 1/8" ----25-220 1/8" 1/8" ----
Part # Tube O.D. Pipe Thread List Price38-769 5/32" 1/16" ----38-770 5/32" 1/8" ----25-175 1/8" 1/16" ----25-176 1/8" 1/8" ----
1460 90791 280 90946
1461 90790 281 90885
1462 90792 283 90891
1468 90794 282 90985• Shipped with nut and split sleeve, picture shows insert
To purchase special compression assemblies, delete the 18 prefix on part# and add the prefix of the type of special assembly you desire. Pricing and availability upon request.
22 - Plastic sleeve (inserts should be ordered seperately)24 - Long nut compression26 - Captive sleeve (parts listed on following pages)27 - Self align sleeve (parts listed on following pages)
26-142 1/8” x 1/8” ----26-143 3/16” x 1/8” ----26-144 3/16” x 1/4” ----26-145 1/4” x 1/8” ----26-146 1/4” x 1/4” ----26-149 5/16” x 1/8” ----26-150 5/16” x 1/4” ----26-152 3/8” x 1/8” ----26-153 3/8” x 1/4” ----26-154 3/8” x 3/8” ----26-155 3/8” x 1/2” ----26-156 3/8” x 3/4” ----26-157 1/2” x 1/4” ----26-158 1/2” x 3/8” ----26-159 1/2” x 1/2” ----
Part # Comp. XMale NPTF
List Price
26-175 1/8” x 1/16” ----26-176 1/8” x 1/8” ----26-177 3/16” x 1/8” ----26-178 3/16” x 1/4” ----26-179 1/4” x 1/8” ----26-180 1/4” x 1/4” ----
26-180L 1/4" x 1/4" ----26-181 1/4” x 3/8” ----26-182 1/4” x 1/2” ----26-183 5/16” x 1/8” ----26-184 5/16” x 1/4” ----26-187 3/8” x 1/8” ----26-188 3/8” x 1/4” ----26-189 3/8” x 3/8” ----26-190 3/8” x 1/2” ----26-193 1/2” x 1/4” ----26-194 1/2” x 3/8” ----26-195 1/2” x 1/2” ----26-196 1/2” x 3/4” ----26-197 5/8” x 3/8” ----26-198 5/8” x 1/2” ----
26-220 1/8” x 1/8” ----26-220B 1/8” x 1/8” ----26-221 3/16” x 1/8” ----
26-221B 3/16" x 1/8" ----26-223 3/16” x 1/4” ----
26-224B 1/4" x 1/8" ----26-224 1/4” x 1/8” ----26-225 1/4” x 1/4” ----
26-225B 1/4” x 1/4” ----26-226 1/4” x 3/8” ----26-228 5/16” x 1/8” ----26-229 5/16” x 1/4” ----26-230 5/16” x 3/8” ----26-232 3/8” x 1/8” ----26-233 3/8” x 1/4” ----
26-233B 3/8” x 1/4” ----26-234 3/8” x 3/8” ----26-235 3/8” x 1/2” ----26-236 1/2” x 1/4” ----26-237 1/2” x 3/8” ----26-238 1/2” x 1/2” ----26-240 5/8” x 3/8” ----26-241 5/8” x 1/2” ----
Part # Comp X Male Pipe
List Price
26-010 3/16” x 1/8” ----26-011 1/4” x 1/8” ----26-011X Heavy Pattern ----26-012 1/4” x 1/4” ----26-013 5/16” x 1/8” ----26-014 5/16” x 1/4” ----
26-272 1/8” x 1/8” ----26-274 1/4” x 1/8” ----26-275 1/4” x 1/4” ----26-279 3/8” x 1/4” ----26-280 3/8” x 3/8” ----26-281 1/2” x 3/8” ----
Part # Comp. XMale NPTF(1&2) X 3
List Price
26-291 1/4” x 1/8” ----26-292 1/4” x 1/4” ----26-293 5/16” x 1/8” ----26-294 5/16” x 1/4” ----26-295 3/8” x 1/8” ----26-296 3/8” x 1/4” ----26-297 3/8” x 3/8” ----26-299 1/2” x 3/8” ----
Part # Comp. XFemale NPTF
List Price
26-251 1/8” x 1/8” ----26-252 3/16” x 1/8” ----26-253 1/4” x 1/8” ----26-254 1/4” x 1/4” ----26-258 3/8” x 1/4” ----26-262 1/2" x 3/8" ----26-270 1/2” x 3/4” ----26-269 5/8” x 3/8” ----
Part # Comp X Male Pipe
List Price
26-031 3/16” x 1/8” ----26-032X* 1/4" x 1/8" ----
CS69 169CA
CS70 170CA
CS71 171CA
CS72 172CA
BRASS FITTINGS CAPTIVE SLEEVE COMPRESSION
• More sizes available• Lead Free - add LF to part #• Tube inserts - page 96 & 167
1-800-569-0810www.buyfittingsonline.com
86 87
BRA
SS
Part # Size List Price27-001 1/8" ----27-002 3/16" ----27-003 1/4" ----
Part # Size List Price27-005 3/8" ----27-006 1/2" ----
SELF-ALIGN SLEEVE
UNION
Part # Size List Price27-062 1/8” ----27-063 3/16” ----27-064 1/4” ----27-066 3/8” ----27-068 1/2” ----27-081 1/2” x 3/8" ----
BALL CHECK VALVE
Part # Tube OD x Male NPTF
List Price
27-092 1/8” x 1/8” ----27-094 1/4” x 1/8” ----27-096 3/8” x 1/4” ----
UNION ELBOW
TANK ADAPTER DRILLERTHRU (NO STOP)
Part # Size List Price27-126 3/8” ----27-127 1/2” ----
Part # Size List Price27-208 1/4"x1/8" ----27-209 1/4"x1/4" ----27-211 3/8"x3/8" ----27-213 1/2"x3/8" ----
FEMALE ADAPTER
Part # Comp. XFemale NPTF
List Price
27-142 1/8” x 1/8” ----27-145 1/4” x 1/8” ----27-147 1/4” x 3/8” ----27-148 1/4" x 1/2" ----27-153 3/8” x 1/4” ----27-158 1/2” x 3/8” ----
MALE ADAPTER
Part # Comp. XMale NPTF
List Price
27-175 1/8” x 1/16” ----27-176 1/8” x 1/8” ----27-177 3/16” x 1/8” ----27-179 1/4” x 1/8” ----27-180 1/4” x 1/4” ----27-187 3/8” x 1/8” ----27-188 3/8” x 1/4” ----27-189 3/8” x 3/8” ----27-190 3/8” x 1/2” ----27-193 1/2” x 1/4” ----27-194 1/2” x 3/8” ----27-195 1/2” x 1/2” ----27-196 1/2” x 3/4” ----
Part # Comp. XMale NPTF
List Price
27-220 1/8” x 1/8” ----27-221 3/16” x 1/8” ----27-224 1/4” x 1/8” ----27-225 1/4” x 1/4” ----27-226 1/4” x 3/8” ----27-232 3/8” x 1/8” ----27-233 3/8” x 1/4” ----27-234 3/8” x 3/8” ----27-235 3/8” x 1/2” ----27-236 1/2” x 1/4” ----27-237 1/2” x 3/8” ----27-238 1/2” x 1/2” ----27-239 1/2” x 3/4” ----
MALE ELBOW
FEMALE ELBOW
Part # Comp. XFemale NPTF
List Price
27-253 1/4” x 1/8” ----27-254 1/4” x 1/4” ----27-258 3/8” x 1/4” ----27-262 1/2" x 3/8" ----27-263 1/2" x 1/2" ----
860 601
865 651
863 631
866 661 869 691
870 201
868 681
860
862 621
863 631
TEE
Part # Size List Price27-102 3/16” ----27-103 1/4” ----27-105 3/8” ----27-115 3/8”x3/8"x1/4" ----27-116 1/2"x1/2"x1/4" ----27-117 1/2"x1/2"x3/8" ----
864 641
• Use with copper, brass, alumi-num and plastic tubing. Soft plastic tubing. Soft plastic tubing requires support inside. Not recommended for steel tubing.• Application: water, air and lubrica-tion system