The Fluid-o-Tech ® magnetic drive rotary vane pumps range widens with the introduction of the TH series which combines the larger flow rate (500 to 1000 l/h at 1450 rpm or 160 to 330 GPH at 1725 rpm) with the added benefit of the magnetic coupling: • longer service life • totally sealed body • low maintenance • less power consumption • smooth transmission The rare earths magnet grants high performance and perfect alignment between the pump and the motor, extending the life of the unit. The absence of friction, usually caused by the rotation of the mechanical seal against the ceramic seat, allows a more efficient operation and therefore a low power consumption. The Rotoflow TH series pumps offer multiple options to configure the product to the specific need of each customer. The housing is available in AISI 303 or brass. The internal components include AISI 303 rotor, carbon graphite pumping chamber and a choice of NBR, EPDM or Viton ® seals. Maximum operative temperature: 70 °C (158 F). Available upon request: • Built-in relief valve • NSF listed pumps available for potable water • Cooling systems • Booster systems • Water treatment • Solar systems MAIN APPLICATIONS Brass and stainless steel magnet drive rotary vane pumps TH 500-1000 series Ø 70 [Ø 2.7558] 63 [2.4803] 105.6 [4.1574] 39 86.6 [3.4094] 114.6 [4.5117] 48 [1.8897] 32 2.5 63 [2.4803] 2x1/2" GAS 2x1/2" NPT [1.2598] [0.0984] [1.5354] Ø 45.7 [Ø 1.7992] Ø 69.5 0 –0.046 [Ø 2.7362] [0.0000] (–0.0018) Ø 78 0 –0.1 [Ø 3.0708] 0.0000 –0.0039 105.6 [4.1574] 39 86.6 [3.4094] 62 [2.4409] 48 [1.8897] 2x1/2" GAS 2x1/2" NPT Ø 70 [Ø 2.7558] 63 [2.4803] Ø 45.7 [Ø 1.7992] 32 Ø 78 0 –0.1 Ø 69.5 0 –0.046 2.5 114.6 [4.5117] [1.2598] [0.0984] [1.5354] [Ø 2.7362] [0.0000] [–0.0018] [Ø 3.0708] 0.0000 –0.0039 TECHNICAL INFORMATION Pump housing material Brass or stainless steel Pumping chamber Ports 1/2” GAS or NPT Pump weight 2.1 kg (4.6 lb) Speed limit Max static pressure 20 bar/290 psi 1.725 rpm Graphite Find out more www.fluidotech.com Dimensions in mm [inches]
2
Embed
Brass and stainless steel magnet drive rotary vane pumps ... · chamber and a choice of NBR, ... [Ø 2.7362] [1.5354] [0.0000] [–0.0018] [Ø 3.0708] 0.0000 –0.0039 TECHNICAL INFORMATION
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The Fluid-o-Tech® magnetic drive rotary vane pumps range widens with the introduction of the TH series which combines the larger flow rate (500 to 1000 l/h at 1450 rpm or 160 to 330 GPH at 1725 rpm) with the added benefit of the magnetic coupling:• longer service life • totally sealed body • low maintenance • less power consumption • smooth transmission
The rare earths magnet grants high performance and perfect alignment between the pump and the motor, extending the life of the unit. The absence of friction, usually caused by the rotation of the mechanical seal against the ceramic seat, allows a more efficient operation and therefore a low power consumption. The Rotoflow TH series pumps offer multiple options to configure the product to the specific need of each customer.
The housing is available in AISI 303 or brass. The internal components include AISI 303 rotor, carbon graphite pumping chamber and a choice of NBR, EPDM or Viton® seals.Maximum operative temperature: 70 °C (158 F).
Available upon request:
• Built-in relief valve• NSF listed pumps available for potable water
• Cooling systems
• Booster systems
• Water treatment
• Solar systems
MAIN APPLICATIONS
Brass and stainless steel magnet drive rotary vane pumps TH 500-1000 series
Note: Characteristics with water at 20 °C (68 F) and without bypass - Use filter before pump inlet not larger than 20 microns. For applications involving other fluids, high temperatures, unusual processing conditions or speed higher than 1725 rpm consult the factory or an authorized Fluid-o-Tech distibutor.
MODEL RELIEF VALVE HOUSING FIGURE
no
no
standard
stainlesssteel
brass
standard
POS DESCRIPTION CODE
1 TH series pump
2 M80-B14 frame motor mounting assembly THBS80C
NEMA 56C frame motor mounting assembly THBS5BC
1
2
0
1150
1050
950
850
750
650
550
450
GPH l/h
1 2
20 psi
3 4 5 6 7 8 9 10 11 12 13 14 15 16 bar
40 60 80 100 120 140 160 180 200 2200
120
300
280
260
240
220
200
180
160
140
FF
EE
DD
CC
BB
AA
1450 rpm
Flow rate
Pressure
0
1350
1250
1150
1050
950
850
750
650
550
GPH l/h
1 2
20 psi
3 4 5 6 7 8 9 10 11 12 13 14 15 16 bar
40 60 80 100 120 140 160 180 200 2200
160
340
320
300
280
260
240
220
200
180
FF
EE
DD
CC
BB
AA
1725 rpm
Flow rate
Pressure
Brass and stainless steel magnet drive rotary vane pumps TH 500-1000 series