Brake Light Pro Supplementary Manual Yamaha YZF-R6 2006-2016 (BLP-U01) www.healtech-electronics.com 1/2 Secure the bike on a stand. Remove the rear seat. Locate the rear light assembly connector. (White, 3-pole connector)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Brake Light ProSupplementary Manual
Yamaha YZF-R6 2006-2016 (BLP-U01)
w w w . h e a l t e c h - e l e c t r o n i c s . c o m 1/2
Secure the bike on a stand.
Remove the rear seat.
Locate the rear light assembly connector.
(White, 3-pole connector)
Brake Light ProSupplementary Manual
Yamaha YZF-R6 2006-2016 (BLP-U01)
w w w . h e a l t e c h - e l e c t r o n i c s . c o m 2/2
Connect the BLP Black wire to the Black wire. Cut the Yellow wire. Connect the BLP Red wire to the Yellow wire end, which goes to the bike’s main wiring harness. Connect the BLP Green wire to the Yellow wire end, which goes to the rear light assembly.
Typical position for the Brake Light Pro. Secure the unit properly.
Related Documents
