137 www.LMCtruck .com Box 14991 • Lenexa, KS 66285-4991 1-800-LMC-TRUCK Order Your Catalogs & Parts Online Before Ordering, Read Pages 155 & 156 Toll Free - USA & Canada PWR = Power STD = Standard 2PC = Two Piece 4PC = Four Piece Pre-Bent Original Material Brake Lines Blazer 1973-82 Jimmy 1973-82 Pre-Bent Stainless Steel Brake Line Kits Blazer 1973-87 Jimmy 1973-87 Front Brake Line Set Rear Brake Line Set BRAKES Brake Master Cylinder and Components Blazer 1973-91 Jimmy 1973-91 34-4014 (1) BRAKE MASTER CYL “A” 2WD BLZ JIM 73-77 (1) 74.94 59.95 34-4014 BRAKE MASTER CYL “A” 2WD BLZ JIM 78-80 (1) 74.94 59.95 34-4032 BRAKE MASTER CYL “B” 2WD BLZ JIM 81-82 (1) 87.44 69.95 34-4014 BRAKE MASTER CYL “A” 4WD BLZ JIM 73 (1) 74.94 59.95 34-4014 BRAKE MASTER CYL 4WD BLZ JIM 74-77 (1) 74.94 59.95 34-4014 BRAKE MASTER CYL 4WD BLZ JIM 78-80 (1) 74.94 59.95 34-4032 BRAKE MASTER CYL 4WD BLZ JIM 81 (1) 87.44 69.95 34-4031 BRAKE MASTER CYL “C” 4WD BLZ JIM 82-91 (1) 62.44 49.95 34-4032 BRAKE MASTER CYL “B” 4WD BLZ JIM 82-91 (1) 87.44 69.95 34-4326-Z (2) BOOSTER-REMAN “D” $25 CORE BLZ JIM 73-75 (1) 149.94 119.95 34-4327-Z BOOSTER-REMAN “E” $15 CORE BLZ JIM 73-75 (1) 149.94 119.95 34-4327-Z BRK BOOSTER-REMAN $15 CORE BLZ JIM 76-80 (1) 149.94 119.95 34-4329-Z BRK BOOSTER-REMAN $20 CORE BLZ JIM 81-91 (1) 149.94 119.95 34-4310 (3) CHECK VALVE-BOOSTER BLZ JIM 73-91 (1) 8.69 6.95 34-4309 (4) AIR FILTER-BOOSTER BLZ JIM 78-91 (1) 16.19 12.95 32-3602 (5) BOOSTER LINE 305 307 4BBL BLZ JIM 73-80 (1) 31.19 24.95 32-3606 BOOSTER LINE 350 4BBL BLZ JIM 73-80 (1) 31.19 24.95 32-3603 BOOSTER LINE 305 307 4BBL BLZ JIM 81-91 (1) 16.19 12.95 32-3607 BOOSTER LINE 350 4BBL BLZ JIM 81-91 (1) 16.19 12.95 How to Identify Your Rear Brakes: 11" Brakes have 2" wide brake shoes. 11-5/32" Brakes have 2-3/4" wide brake shoes. Note: "A" With power brakes. "B" Models with power brakes and gas engines. "C" Models with power brakes and diesel engines. "D" With 11-5/32" rear brakes. "E" With 11" brakes. 1 5 2 3 4 Install it once and forget it. Replacing your original brake lines with Stainless Steel Brake Lines increases the longevity of your brake line system. High-quality stainless steel is used so your new brake lines will last and last. Call or go online and order your new Stainless Steel Brake Line Kit today. Core Refund Information - Brake Booster: A rebuildable core will have no excessive wear. No broken, cracked or dented housings. No worn or stripped threads. If it does not meet the above standards, it is not rebuildable and will not be refunded. DO NOT send a non-rebuildable core. Front Brake Hoses Rear Brake Hoses Brake Hoses Blazer 1973-91 Jimmy 1973-91 Note: "A" With 11-5/32" brakes. Rear Brake Hose Front Brake Hose How to ID Brakes See Below Left Hand (LH) & Right Hand (RH) Means as You Sit Facing Forward in the Truck 34-4416 FRONT BRAKE HOSE-LH 2WD BLZ JIM 73-78 (1) 24.94 19.95 34-4417 FRONT BRAKE HOSE-RH 2WD BLZ JIM 73-78 (1) 24.94 19.95 34-4418 FRONT BRAKE HOSE-LH 2WD BLZ JIM 79-80 (1) 31.19 24.95 34-4419 FRONT BRAKE HOSE-RH 2WD BLZ JIM 79-80 (1) 31.19 24.95 34-4418 FRONT BRAKE HOSE-LH “A” 2WD BLZ JIM 81-82 (1) 31.19 24.95 34-4419 FRONT BRAKE HOSE-RH “A” 2WD BLZ JIM 81-82 (1) 31.19 24.95 34-4434 FRONT BRAKE HOSE 4WD BLZ JIM 73-78 (2) 37.44 29.95 34-4436 FRONT BRAKE HOSE 4WD BLZ JIM 79-80 (2) 37.44 29.95 34-4432 FRONT BRAKE HOSE-LH 4WD BLZ JIM 81-91 (1) 37.44 29.95 34-4433 FRONT BRAKE HOSE-RH 4WD BLZ JIM 81-91 (1) 37.44 29.95 34-4462 REAR BRAKE HOSE 2WD BLZ JIM 73-82 (1) 37.44 29.95 34-4462 REAR BRAKE HOSE 4WD BLZ JIM 73-91 (1) 37.44 29.95 34-5646 BRAKE LINE KIT-8PC-STANDARD 2WD BLZ JIM 73-80 (1) 274.94 219.95 34-5647 BRAKE LINE KIT-8PC-POWER 2WD BLZ JIM 73-80 (1) 274.94 219.95 34-5648 BRAKE LINE KIT-9PC-POWER 2WD BLZ JIM 81-82 (1) 274.94 219.95 34-5649 BRAKE LINE KIT-8PC-POWER 4WD BLZ JIM 73-80 (1) 274.94 219.95 34-5650 BRAKE LINE KIT-8PC-POWER 4WD BLZ JIM 81-87 (1) 274.94 219.95 30-1387 UNION-FRONT TO REAR BRAKE LINE BLZ JIM 73-87 (1) 2.44 1.95 34-5720 BRAKE LINE SET-FRONT-4PC STD 2WD BLZ JIM 73-80 (1) 137.44 109.95 34-5721 BRAKE LINE SET-FRONT-4PC PWR 2WD BLZ JIM 73-80 (1) 137.44 109.95 34-5722 BRAKE LINE SET-FRONT-4PC PWR 2WD BLZ JIM 81-82 (1) 137.44 109.95 34-5728 BRAKE LINE SET-REAR AXLE-2PC 2WD BLZ JIM 73-80 (1) 37.44 29.95 34-5729 BRAKE LINE SET-REAR AXLE-2PC 2WD BLZ JIM 81-82 (1) 43.69 34.95 30-1387 UNION-FRONT TO REAR BRAKE LINE BLZ JIM 73-82 (1) 2.44 1.95 PART ILL# DESCRIPTION AND APPLICATION REQD LIST SELL PART DESCRIPTION AND APPLICATION REQD LIST SELL PART DESCRIPTION AND APPLICATION REQD LIST SELL 30-1387 Brake Line Union
7
Embed
Brake Hoses - Truck Parts & Truck Accessories for Chevy, GMC
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Install it once and forget it. Replacingyour original brake lines with StainlessSteelBrakeLinesincreasesthelongevityof your brake line system. High-qualitystainless steel is used so your newbrakelineswill lastandlast.Callorgoonline and order your new StainlessSteelBrakeLineKittoday.
Core Refund Information - Brake Booster: A rebuildable core will have noexcessive wear. No broken, cracked or dented housings. No worn or strippedthreads.Ifitdoesnotmeettheabovestandards,itisnotrebuildableandwillnotberefunded.DONOTsendanon-rebuildablecore.
Increase the braking ability ofyour truck by installing SlottedCrossDrilledRotors.Performancebrake rotors provide shorterstopping distances, lessen fadeandimprovewet-weatherbraking.Chamfered cross drilled holesallow built-up heat and gasesto dissipate, lowering rotortemperature by up to 200°,prolongingrotorandpadlife.Thecurved slots deglaze the brakepads, reduce brake fade andminimizebrakedust.
PART DESCRIPTION AND APPLICATION REQD LIST SELL
RearDiscBrakeConversionKit
Upgradeyourtruck'sbrakeswithaRearDiscBrakeConversionKit.Reardiscbrakes improveyour truck'sbrakingsystemandprovidereliable,all-weatherperformance.Rear Disc Brake Conversion Kit will convert your rear drums to12"rotorswithsinglepistoncalipers.Kitsareavailablewitheitherstandardorcrossdrilled/slottedrotorsforbetterperformance,longerlifeandcoolerbrakingtemperatures.
Rear Disc Brake Kit will work with 15" orlarger wheels. Disc Brake ProportioningValve#37-8546isalsorequired.Kitcontains:•12" Standard or Performance CrossDrilled/SlottedRotors
BrakeHoseSetsfeaturestainlesssteelbraided hose with zinc-plated fittings,factory assembled for installationconvenience. Stainless steel brakehoses increase braking performanceand reduce brake pedal travel byeliminatinghoseexpansioncommontofactory rubber hoses. Each set comeswithallnecessaryhardwareandfittings.
Castrol Brake and Clutch Fluidexceeds DOT 3 and DOT 4specificationsandisrecommendedfor all vehicles with theserequirements. Unique syntheticformulation provides maximumprotectionagainstvaporlockfailure.Availableina12-ouncebottle.
Silicone Brake and Clutch Fluid meets DOT 5 requirements andis best for extended use; it won't absorb water that can causecorrosion. Silicone Brake Fluid will not harm painted surfaces.Available in a 32-ounce bottle. Not compatible with DOT 3 orDOT4brakefluid.NotforuseinvehiclesequippedwithABS.
CoreRefund Information -Calipers:A rebuildable corewill havenoexcessivewear. Caliper must be assembled. No worn, damaged or cracked castings. Nodamagedbleederscrewthreadsorseat.Nowornorelongatedmountingpoints.Ifitdoesnotmeettheabovestandards,itisnotrebuildableandwillnotberefunded.DONOTsendanon-rebuildablecore.
Thermal Spark Plug Boot Sleeves provide unmatched thermal protection against hot exhaust headers. Double-layer gray fiberglass sleeves are non-conductive and can directly contact hot surfaces without any harmful effects.
PART DESCRIPTION AND APPLICATION LIST SELL
PART DESCRIPTION AND APPLICATION LIST SELL
36-6010
Limited Lifetime Warranty
AllHeaderSetsBeloware
HEDMAN Headers are built to last and backed by a Limited Lifetime Warranty. Tests have shown a 1.1 second improvement in 0 to 60 second times. You can expect up to a 20% increase in horsepower and up to a 10% increase in gas mileage. These headers have 3" collector tubes to give you excellent exhaust flow, reducing back pressure and improving performance. Supplied complete with all nuts, bolts, gaskets and instructions needed for installation ... even the decals! Call or go online and order yours today! Increases in fuel efficiency and horsepower are based on a truck operating at factory specifications. Increases may vary according to the condition of your truck and driving habits. When installing #36-6010 it is necessary to cut existing lead pipe to attach new header adaptor pipe that is included with Header Set.
Not legal for sale or use on pollution controlled vehicles.
Note: "A" Without smog injection or injection heads. "B" With smog injection or injection heads. "C" Air conditioned equipped trucks with axial air compressor require
bracket #36-6024. "D" A small number of 1973-74 trucks with manual transmissions
underwent a dealer modification moving the clutch cross shaft to a location under or behind the driver's side rear exhaust port. If your truck was modified as such, you must order either #36-6006 or #36-6008. Check for your application.
"E" Must modify rotary A/C bracket.
36-6004 HEADER SET 305 350 “A”E” 2WD BLZ JIM 73-82 474.94 379.9536-6001 HEADER SET 305 350 400 “A”D”E” 4WD BLZ JIM 75-81 474.94 379.95
36-6010 HEADER SET 305 350 400 “A”C”D”E” 2WD BLZ JIM 73-82 312.44 249.9536-6012 HEADER SET 305 350 400 “B”C”E” 2WD BLZ JIM 82 499.94 399.95
36-6000 HEADER SET 305 350 400 “A”C”D”E” 4WD BLZ JIM 73-81 299.94 239.95
36-6010 HEADER SET 305 350 400 “A”E” 4WD BLZ JIM 82-91 312.44 249.9536-6012 HEADER SET 305 350 400 “B”E” 4WD BLZ JIM 83-91 499.94 399.95
36-6024 A/C COMPRESSOR BRACKET BLZ JIM 73-84 23.69 18.95
36-6006 HEADER SET - NOTE “D” ONLY BLZ JIM 73-74 362.44 289.95 305 350 “A”C”E” W/STD TRANS
36-6008 HEADER SET - NOTE “D” ONLY BLZ JIM 73-74 499.94 399.95 305 350 “B”C”E” W/STD TRANS
36-6012 HEADER SET 305 350 400 “B”C”D”E” 2WD BLZ JIM 73-82 499.94 399.9536-6002 HEADER SET 305 350 400 “B”C”D”E” 4WD BLZ JIM 73-81 499.94 399.9536-6012 HEADER SET 305 350 400 “B”E” 4WD BLZ JIM 73-82 499.94 399.95
36-6024 A/C COMPRESSOR BRACKET BLZ JIM 73-84 23.69 18.95
36-6008 HEADER SET - NOTE “D” ONLY BLZ JIM 73-74 499.94 399.95 305 350 “B”C”E” W/STD TRANS
PERFORMANCEExHAUST
ExhaustHeaders
36-6056 HEADER SET 305-400 “A”B”C”D” 2WD BLZ JIM 73-82 (1) 374.94 299.9536-6056 HEADER SET 305-400 “A”D” 4WD BLZ JIM 82-91 (1) 374.94 299.95
36-6024 A/C COMPRESSOR BRACKET BLZ JIM 73-82 (1) 23.69 18.95
36-6056
Ceramic Coated Headers combine improved exhaust flow for more horsepower with exceptional corrosion resistance. The bright ceramic protective coating not only allows for long-term good looks but also provides thermal protection up to 1400°F, reduces underhood temperatures and won't discolor or peel off like chrome or paint. Headers feature 3/8" thick laser-cut flanges and 14 gauge, 1-5/8" diameter full-length primary tubes with 3" collectors to reduce back pressure for improved engine performance versus stock exhaust manifolds. Includes exhaust flange and collector adaptor mounting hardware and gaskets. When installing #36-6056 it is necessary to cut existing lead pipes to attach to the new 3-bolt 3" x 2-1/2" header adaptor pipes included with header set. DO NOT install ceramic coated headers while breaking in a new engine. This WILL result in damage to the ceramic coating. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Use exhaust manifolds or old exhaust headers during new engine break-in period. Use of heat wraps may cause header tubes to crack and is not recommended.CeramicCoatedHeaderSet#36-6056isUSAStreetLegalONLYonmodelsnotequippedwithfactorycatalyticconverter.
CeramicCoatedHeadersBlazer 1973-91Jimmy 1973-91
Note: "A" Without smog injection or injection heads. "B" Air conditioned equipped trucks with axial air compressor require
bracket #36-6024. "C" Will not fit a small number of 1973-74 trucks that were dealer modified
moving the clutch cross shaft to a location under or behind the driver's side rear exhaust port.
"D" Must modify rotary A/C bracket.
36-6190 SPARK PLUG BOOT SLEEVE SET 21.19 16.95
ThermalSparkPlugBootSleeveSet
36-6190
Chemically-resistant 3/4" diameter braided sleeves easily slip over any spark plug wire and boot configuration to protect from exhaust temperatures up to 1200°F. Available as a two-piece set. Call or go online and order yours today!
These mufflers are specially designed to reduce and control noise without excessively restricting power. Made from the finest quality materials.
Highest quality turbo-style mufflers which can be used as OE replacements as well as on custom exhaust systems.
TurboMufflers•Galvanized, double wrapped
muffler casing for maximum rust protection.
•Spot welded, louvered baffles to eliminate vibration.
•Reverse flow so that muffler can be inverted.
• Spun end caps for gas tight seal.
TurboHeaderMufflersHas the same qualities as the Turbo Mufflers and has a 3" flange to bolt-up directly to most headers.
36-6040
36-6040 HEDMAN TURBO HEADER MUFFLER 2-1/4” X 2-1/4” 68.69 54.95
PART DESCRIPTION AND APPLICATION LIST SELL36-6030 HEDMAN TURBO MUFFLER 2” X 2” 49.94 39.9536-6031 HEDMAN TURBO MUFFLER 2-1/4” X 2-1/4” 49.94 39.9536-6032 HEDMAN TURBO MUFFLER 2-1/2” X 2-1/2” 49.94 39.95
PART DESCRIPTION AND APPLICATION LIST SELL
36-5591 CATALYTIC CONVERTER 250 BLZ JIM 75-82 (1) 199.94 159.95
36-5591 CATALYTIC CONVERTER 305 BLZ JIM 78-87 (1) 199.94 159.95
36-5591 CATALYTIC CONVERTER 350 BLZ JIM 78-86 (1) 199.94 159.9536-5595 CATALYTIC CONVERTER 350 BLZ JIM 87-91 (1) 224.94 179.95
36-5591 CATALYTIC CONVERTER 400 BLZ JIM 78-79 (1) 199.94 159.95
In August 1986 the U.S. Environmental Protection Agency issued strict new guidelines regulating aftermarket Catalytic Converters. Our Replacement Catalytic Converters are designed and manufactured to meet EPA emission requirements. With many states getting more stringent with their emission testing, we are pleased to be able to offer you a reasonably priced, proven and tested product that is legal for road use in 49 states and Canada. Replacement converters are not legal for sale or use in California.
ChromeExhaustTips are triple chrome plated for a lasting deep finish. Available in both Angled and Blunt Outlets. They are 9" long and are available in two sizes; 2-1/4" made to fit 2-1/4" outer diameter exhaust pipes and 2-1/2" made to fit 2-1/2" outer diameter exhaust pipes. Chrome Exhaust Tips can be easily installed with exhaust clamps that are included with tips or welded on for a smoother look.
Exhaust Deflector is made from stainless steel for extended life and includes hardware.
PART DESCRIPTION AND APPLICATION LIST SELL
38-6835 EXHAUST TIP-CHROME W/CLAMP 2-1/4” ANGLE TIP 18.69 14.9538-6837 EXHAUST TIP-CHROME W/CLAMP 2-1/2” ANGLE TIP 18.69 14.95
38-6834 EXHAUST TIP-CHROME W/CLAMP 2-1/4” BLUNT TIP 13.69 10.9538-6836 EXHAUST TIP-CHROME W/CLAMP 2-1/2” BLUNT TIP 18.69 14.95
StainlessSteelExhaustTips are made from 16 gauge 304 grade stainless steel for longer life. Available in both Angled and Blunt Outlets. They are 15" long with 3-1/2" diameter outlets. Two inlet sizes are available; 2-1/4" made to fit 2-1/4" outer diameter exhaust pipes and 2-1/2" made to fit 2-1/2" outer diameter exhaust pipes.Exhaust Tips can be welded on for a smooth fit or clamped on with #31-0560 or #31-0561 Stainless Steel Exhaust Clamps. Clamps are not included with tips and must be purchased separately.
PerformanceGlassPackDualExhaustSystems▲Glass pack exhaust systems have bullet shaped, straight through glass pack mufflers to reduce back pressure and give that aggressive rumble you want.36-5577 DUAL GLASS-PACK 305 350 2WD BLZ JIM 73-78 224.94 179.95 *
36-5493 REPLACEMENT GLASS PACK MUFFLER 33.69 26.95 USE FOR PARTS 36-5577/36-5587
PerformanceTurboDualExhaustSystems▲Turbo exhaust systems have 2-1/4" in and out flow turbo mufflers to reduce back pressure and give that great low exhaust tone you expect from your truck.36-5575 DUAL TURBO EXH 305 350 2WD BLZ JIM 73-78 274.94 219.95 *
36-5491 REPLACEMENT TURBO MUFFLER 43.69 34.95 USE FOR PARTS 36-5575/36-5586
PerformanceGlassPackDualandPerformanceTurboDual
ExhaustSystems
Only on Models NotEquippedwithFactoryCatalyticConverter
PART DESCRIPTION AND APPLICATION LIST SELL
* After the sell price means Oversize Part Charge. Your order will incur a charge of $20.00 for each oversized part. Additional delivery time required.
36-2725
HighAmpAlternatorsBlazer 1973-91Jimmy 1973-91Do you need more amperage to run today's modern accessories? These high amp alternators will give your truck the charging power it needs. Direct replacement for your original alternator. Features include high output with excellent idle performance; hand-wound, custom-designed stators; gold-plated battery post for better electrical connections; and "Proof of Performance" tag.
36-2724 ALTERNATOR “A”100AMP 6&8 CYL BLZ JIM 73-82 (1) 199.94 159.9536-2725 ALTERNATOR-CHRM”A”100AMP 6&8 CYL BLZ JIM 73-82 (1) 249.94 199.9536-2744 SERPENTINE PULLEY 6&8 CYL BLZ JIM 73-82 (1) 13.69 10.95
36-2727 ALTERNATOR “A”140AMP 6&8 CYL BLZ JIM 73-87 (1) 274.94 219.9536-2728 ALTERNATOR-CHRM”A”140AMP 6&8 CYL BLZ JIM 73-87 (1) 399.94 319.9536-2730 ALTERNATOR “B”140AMP V8 BLZ JIM 88-91 (1) 287.44 229.9536-2731 ALTERNATOR-CHRM”B”140AMP V8 BLZ JIM 88-91 (1) 374.94 299.9536-2745 SERPENTINE PULLEY-CHROME 6&8 CYL BLZ JIM 73-87 (1) 37.44 29.95
36-2733 ALTERNATOR “B”200AMP V8 BLZ JIM 88-91 (1) 612.44 489.95
38-1872
Some models were equipped with catalytic converters. Check yours before ordering.▲ These are longbed systems. Front extension pipes will need to be cut to fit.
Make your exhaust change or repair easy with a Header Reducer Set. Whether adding a new set of headers to your existing exhaust or building an entirely new system, these are some of the most important pieces you'll need to complete your project. Header Reducers have 3" collectors and are available to fit exhaust pipe sizes from 2-1/4" to 3". Reducer Gasket Set is a replacement for 3" flange style reducers.
ExhaustHeaderReducers
36-6042
36-6045
36-6046
3BoltFlangeStyle
BallFlangeStyle
36-6042 HEADER REDUCER SET 3” TO 2-1/4” (1) 31.19 24.9536-6043 HEADER REDUCER SET 3” TO 2-1/2” (1) 31.19 24.9536-6044 HEADER REDUCER SET 3” TO 3” (1) 37.44 29.9536-6045 GASKET SET-REDUCER 3” (1) 7.44 5.95
36-6046 HEADER REDUCER SET 3” TO 2-1/4” (1) 31.19 24.9536-6047 HEADER REDUCER SET 3” TO 2-1/2” (1) 31.19 24.9536-6048 HEADER REDUCER SET 3” TO 3” (1) 37.44 29.95
Note: "A" Alternator includes a V-Belt pulley. Serpentine pulley must be ordered separately.
"B" Alternator includes a serpentine pulley. "C" Cut to length as required.
36-2746 SLEEVE-ALTERNATOR MOUNT “C” 305-400 73-86 (1) 4.94 3.9530-0573 BOLT-ALTERNATOR MOUNT 305-400 73-86 (1) 3.69 2.95
PART DESCRIPTION AND APPLICATION REQD LIST SELL
With 2-1/4" tailpipes, these Dual Exhaust Systems reduce exhaust restriction and back pressure for increased horsepower and better fuel economy. Complete with bolt-on connectors that adapt to your stock manifold ... no welding necessary! All parts and hardware for standard installation are included.
Made with modern tube benders utilizing mandrel bends ensuring each bend is smooth flowing, increasing exhaust flow by up to 20% over stock systems. Call or go online and order yours today!
The standard stock exhaust system of a truck with a 350 engine is a single 2-1/2" pipe. This means that you will be getting an 80% increase in exhaust flow, increasing horsepower by up to 18% and improving fuel efficiency and low end torque at the same time. Increases in fuel efficiency and horsepower are based on a truck operating at factory specifications. Increases may vary according to the condition of your truck and driving habits. Manufactured from 16 gauge aluminized steel. Lasts up to twice as long as conventional plain steel systems.