Product Overview Munters manufactures a wide variety of dehumidification and energy recovery products to suit different commercial applications. Products range from stand-alone dryers and energy recovery units to fully integrated systems complete with cooling coils, packaged dx refrigeration, heating and more. Additional information regarding all Munters products can be found at www.munters.com. COMMERCIAL PRODUCTS
4
Embed
BR0031-06 Munters Commercial Products Overview · Product Overview Munters manufactures a wide variety of dehumidification and energy recovery products to suit ... be met without
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Product OverviewMunters manufactures a wide variety of dehumidification and energy recovery products to suit different commercial applications. Products range from stand-alone dryers and energy recovery units to fully integrated systems complete with cooling coils, packaged dx refrigeration, heating and more. Additional information regarding all Munters products can be found at www.munters.com.
C O M M E R C I A L P R O D U C T S
• ClimaFlex™ – 1,000 - 30,000 CFM unit with all available energy recovery products, packaged DX, cooling and heating products in a side-by-side and over/under confi gurations
• Custom – Up to 100,000 cfm and virtually any option and confi guration available
• Custom Pools – Up to 100,000 cfm unit designed specifi cally for the indoor pool environment. Virtually any option and confi guration available.
• DryCool™ Standard System – 1,000 to 16,000 cfm available as a packaged or split air cooled system, water cooled and chilled water and heating options
• DryCool™ ERV – 1,500 to 16,000 cfm unit with enthalpy recovery in addition to the desiccant dehumidifi cation process. Post cooling and heating options available.
• DryCool™ Pool – 1,000 to 16,000 cfm unit designed specifi cally for the indoor pool environment. Includes exhaust fan and heating options.
• FreeDry™ – 1,000 to 16,000 cfm unit for low dew point applications, such as ice rinks, off ering cooling and heating optional modes
• Desiccant DDS Product – 1,500 to 50,000 cfm unit with dehumidifi cation capacities of up to 800 lb/hr. Pre-engineered modules and customization options create fl exible system designs and confi gurations.
Dehumidifi cation
Desiccant ProductsThe Munters’ HoneyCombe™ desiccant wheel was invented by Carl Munters in the 1950s and to this day, is the core product in all Munters desiccant dehumidifi ers. Munters DDS products are a traditional desiccant unit, utilizing high temperature heat in the form of direct fi red gas, steam, high temperature hot water or electric to reactivate the wheel for low dewpoint applications. DryCool™ products, previously referred to as humidity control unit or HCU, utilize direct expansion condenser heat to reactivate the desiccant wheel while the evaporator provides cooling prior to the desiccant process. These system are designed to provide 100% makeup air at space neutral temperature and below space humidity.
Humidity and Temperature Control through Energy Recovery Energy recovery and dehumidifi cation are the key ingredients to this product family. A cooling coil is used to provide dehumidifi cation with heat exchangers providing energy recovery for free cooling prior to the cooling coil and free reheat after the cooling coil. Confi gurations are available with or without exhaust recovery.
ClimaFlex™ – The Munters ClimaFlex product line is a family of pre-engineered, modular
units designed to incorporate heat recovery, humidity control and other air treatment options.
These confi gurable systems range from 1,000 to 30,000 cfm and are suited for all climates,
applications and budgets. This product line off ers the design fl exibility of a custom-built unit with
all the effi ciencies of a standard product line. The ClimaFlex product line also introduces a new
generation of selection software, GENESYS. GENESYS is a simple solution that provides endless
confi guration layouts and options to create a system specifi cally designed for every customer’s
needs. Just a few clicks will generate your own specifi cation and mechanical layout.
Energy Recovery
Indirect Evaporative Cooling
Plate Heat Exchangers, Heat Pipes, Sensible and Enthalpy Wheels Exhaust recovery ventilation utilizes energy from the exhaust air stream to precondition the outside air being introduced into the building. In the winter it provides free heating and in the summer free cooling.
Oasis Products Direct evaporative cooling, indirect
evaporative cooling or the combination of
both is available in the Oasis™ product line.
In dry climates this allows for part, or all of
the cooling requirements of the building to
be met without refrigeration-based cooling.
Direct evaporative cooling utilizes Munters
CELdek™ and GLASdek™ evaporative pad.
Indirect evaporative cooling utilizes heat
pipes or the EPX polymer heat exchanger.
Units are available up to 100,000 cfm
with virtually any option and confi guration
available. Cooling, including packaged dx,
is available. Effi ciencies as high as 100 EER
have been achieved.
Munters is a global leader in energy effi cient air treatment solutions
Using innovative technologies, our expert engineers create the perfect climate for customers in a wide range of industries, with the largest being food, pharmaceutical and data center sectors. Munters has been defi ning the future of air treatment since 1955. Today, manufacturing and
sales are carried out in 30 countries by around 3,000 employees. Munters reports annual net sales in the region of SEK 4 billion and is owned by Nordic Capital Fund VII.