B&R Enclosures Data ICT brenclosures.com.au
TABLE OF CONTENTSAbout B&R Enclosures
About B&R Enclosures................................................... 2-5Selection guide....................................................................6Selecting the right enclosure............................................7Supply strategy....................................................................7Home Networking (internal use) .............................. 10-11Telecom BD.................................................................. 12-13Ausrack Wall onyX ..................................................... 14-15Ausrack Wall ............................................................... 16-17Ausrack Floor onyX ..................................................... 18-19Ausrack Floor Server onyX ........................................ 20-21Ausrack Plus Server ................................................... 24-25Ausrack Plus Network ............................................... 26-27Ausrack Plus Frame 600mm wide ............................ 28-29Ausrack Plus Frame 800mm wide ............................ 30-31Ausrack Plus Accessories ........................................ 32-36Project Profi le – Gold Coast University Hospital .........37Ausrack TxD ................................................................. 38-39Ausrack TxD Accessories ......................................... 40-41General Ausrack Accessories .................................. 42-43Ausrack CQr ................................................................. 44-45Smart Intelligent Locking Solutions ......................... 46-47Airfl ow Effi ciency Solutions ...................................... 48-51Ausrack Patch ............................................................. 52-53Ausrack Cable Management .................................... 54-55Ausrack Power Rails ........................................................56Captive Plug Ring ..............................................................57Intelligent Power Distribution Units ......................... 58-59Data Cages .........................................................................60Cold Aisle Containment ....................................................61Ausrack IP .................................................................... 62-63Ausrack IP Accessories ............................................ 64-69Field FC.......................................................................... 70-71Field FC Accessories .................................................. 72-73iLINQ Stand-Alone ...................................................... 74-75iLINQ Assembed-To-Order ....................................... 76-77SSI Specifi cations....................................................... 78-79Project Profi le – YourDC ..................................................80Product Index .............................................................. 81-84
Since 1955, B&R has built a reputation for excellence in the design and manufacture of enclosures. Everything we have learned in that time, we’ve poured into our products and relationships.
As a 100% Australian, family-owned business, B&R champions the virtues of quality, service and value. Combined with our unrivalled industry and application knowledge, we are in a unique position to meet the needs of our clients. The company encompasses four divisions: Industrial, Data ICT, Hazardous Areas and Residential Commercial.
Each division focuses on the unique needs of different market segments. Together, these divisions share the strengths, resources and experience of the founding company to provide attentive customer service, innovative design and superior quality products at a competitive price.
Quality is assured with B&R’s certification to ISO9001. B&R is also accredited by the Australian Stainless Steel Association as a superior producer of stainless steel products, working to industry best practice. Our occupational health and safety management system is certified to AS/NZS4801.
At B&R, we are justifiably proud of our products, and we strive to ensure that you have what you need, when you need them. We have a network of offices and distributors throughout Australia, New Zealand and internationally. Wherever you are, you will be able to buy B&R products nearby.
DisclaimerThis catalogue has been prepared specifically for customers of the publisher and as a general reference only. B&R Enclosures Pty Ltd engages in a policy of continuous development and improvement of its products and reserves the right to alter, add and/or delete specifications of any products or equipment without notice and without incurring liability. The publisher and any party associated with the production of this catalogue do not accept any responsibility or liability whatsoever (to the extent permitted by law) for any inaccuracy, error, misinformation or misleading statements, whether negligently caused or otherwise, contained in this publication. This publication is protected by copyright and may not be reproduced or copied (using any method of reproduction or copying), sold, transmitted, circulated or otherwise forwarded to third parties, in whole or part, without prior written consent of the author. All registered trademarks and product names appearing herein are the property of the respective owners. CAJ201605-2
B&R Enclosures was founded by Dick Bridges in 1955, specialising in sheet metal fabrication, including electrical enclosures for domestic metering applications.
With little capital but great enthusiasm for operating his own business and a determination to succeed, Dick commenced operations in his backyard in Adelaide, South Australia.
It was this family determination that has sustained B&R’s growth into manufacturing plants in Brisbane, Adelaide and Sydney, 8 locations nationally and an international network of distributors.
As a 100% Australian, family-owned business, B&R champions the virtues of quality, service and value. Combined with our unrivalled industry and application knowledge, we are in a unique position to meet the needs of our clients.
B&R Enclosures encompasses four divisions: Industrial, Data ICT, Hazardous Areas and Residential Commercial. Each division focuses on the unique needs of different market segments.
Together, these divisions share the strengths, resources and experience of the founding company to provide attentive customer service, innovative design and superior quality products.
Some of the largest companies around the world use B&R as a major supplier. These include BHP Billiton, Rio Tinto and the Australian government to name a few. We have enjoyed repeat business with the world’s leading mining companies for over 20 years.
B&R Enclosures can offer extensive supply chain capabilities featuring supply from stock (ex our national warehouse network), supply of assembled to order solutions with short lead times, value adding services and cooperation with other suppliers to allow for integration of third party products into enclosures, racks or cabinets prior to shipment.
B&R is also experienced in arranging specialised freight, product delivery, installation and removal of packaging. We measure our service performance and can provide regular written reports if required. B&R also provides key account management and project management to ensure that we clearly understand and can anticipate the ongoing needs ofour customers.
Our Vision Our Core Values
Since 1955, B&R has built a reputation for excellence inthe design and manufacture of enclosures. Everything wehave learned in that time, we’ve poured into our productsand relationships.
Our commitment to supporting the community, locally and abroad is fundamentally grounded first and foremost in safety. Across all our projects, we work to eliminate risk by ensuring that our products will both protect and maintain valuable assets but most importantly, keep people safe. With a growing plethora of electrical enclosure solutions available on the market and increasingly tough rules surrounding the safety and reliability of electrical installations, we go beyond just compliance to making safety the heart of our culture.
As a specialist manufacturer and supplier, we meet this challenge head on, providing an integrated approach to the delivery of complex projects requiring close collaboration and expertise. We proudly prioritise safety in all project planning and installation, from construction to completion. This allows B&R a reputation for excellence in providing greater certainty and value in the performance of project operations and facilities.
Building Trust - We ensure that our employees are trusted by customers as a partner who listens to their needs in order to meet their expectations in a reliable and consistent manner.
Commitment to Quality - We ensure we adhere consistently to standards to satisfy customer and user requirements,whilst producing and providing products and services of the highest quality.
Participation - Collaboration plays an important role in generating creative thinking and problem solving.
Enthusiastic - Empowered to seek new opportunities toinnovate and improve the B&R experience.
Ethical - An honorable approach underpins the core values and decision making made across all areas of the B&R business.
Business Overview
2 Data ICT
At B&R, we have been delivering safety for people and security for equipment since 1955. Our products are made in Australia for Australian data centres.
At B&R, we understand that technology and our people play an important role in making sure all our products are of the highest quality. From material through to design and manufacturing, B&R do not compromise on quality. Our final product is not only functional but durable.
Our capabilities include:
• 3D Solidworks modelling
• Automated laser cutter, robotic punching andbending machines
• Robotic formed in place gasket application machinery
• Automated powdercoating lines with multi-stage re-treatment process
• Value add services
• In-house testing including IP protection rating, salt spray, structural, climate and electrical conformity
B&R not only manufacture and supply a range of enclosure solutions, but we can create a custom solution to be 100%fit-for-purpose and ready for installation.
We offer a wide range of services to customise standard product, ensuring that an enclosure is delivered ready for installation. We understand that time is a major consideration on any project and we work with our customers to provide products on time and on budget.
Our services include:
• Door cutouts• Cable entries• Terminals and control fitted• Viewing windows• Customised wiring• Vent kits / sunshields fitted or punched• Assemble to order / fitting of accessories
B&R Enclosures offers an extensive range of products including: industrial and mining enclosures, switchboards and MCC’s, hazardous area equipment, data racks and cabinets, domestic and commercial enclosures. As a learning organisation, B&R Enclosures prides itself on continually searching for the best and most innovative solutions. For this reason, we have been able to grow our experience across multiple industries, designing and supplying standard or custom product and engineering solutions into a vast array of applications.
Industrial Data & ICT
Process Automation & ControlJunction & MarshallingPower DistributionMotor ControlClimate Control
Networking & ServerContainment & Caging High Security/SCECCooling & EfficiencySmall Office/Home OfficeTelecommunications SolutionsPower Distribution
Business Overview
Residential Commercial Hazardous Areas
Power DistributionGroup/Commercial MeteringHome Networking
Zones 1 & 2, 21 & 22Exe & Exd EnclosuresLightingWeatherproofPlugs & Sockets
Major End Users• Telstra• NBN • Suncorp • Department of Defence • Adam Internet• Linfox• Qantas• QLD Health• QUT• YourDC• Energex• Ergon• Police Safety Network • Polaris• Pipe Networks • Department of Education • Department of Health WA • AXA• Metronode• Coles• Woolworths
Some of the largest companies around the world use B&R as a major supplier. These include Telstra, NBN Co. and the Australian Government to name a few. B&R Enclosures fosters longstanding partnerships with our clients,ensuring that we understand their evolving needs and business drivers.
Business Overview
Range
Home Networking •
Telecom BD •
Ausrack Wall onyX •
Ausrack Wall •
Ausrack Floor onyX •
Ausrack Floor Server onyX •
Ausrack Plus Server •
Ausrack Plus Network •
Ausrack Plus Frame •
Ausrack TxD • •
Ausrack CQr •
Airflow Efficiency •
Ausrack Patch •
Ausrack Cable Management • • • • •
Ausrack Power Rail • •
Captive Plug Ring •
Ausrack IP •
Field FC •
iLINQ •
HOME NETWORKINGSuitable for facilitating communication among digital devices present inside or within the close vicinity of a home or small offi ce
TELECOMMUNICATIONSSuitable for communication over a distance by cable, telegraph, telephone or broadcasting.
NETWORKING & SERVERSuitable for data roomor data centre environments where high density networks and servers need to be accommodated.
HIGH SECURITYSuitable for defence or public safety networks where equipment security is of top concern.
POWER DISTRIBUTIONPower distribution is the process of moving electricity from the locations at which it is generated to the end users.
COOLING & EFFICIENCYSuitable for a variety of general electrical, industrial automation or process control applications.
Product CatalogueSelection Guide
6 Data ICT
Product CatalogueSelecting the Right Enclosure
OUR SUPPLY STRATEGIES
Made to StockThese products are available ex stock from all our sales & warehousing branches. Contact your local sales representative to discuss requirements.
Made to OrderThese products are manufactured according to a customer's specifi cation. They are marked in our catalogues as "▲ Available on request" and have a standard lead time of 2-3 weeks.
Assembled-to-OrderThese products are assembled to order upon receipt of a customer order. All components required to build an ATO item cannot be sold seperately and must form part of a kit. Standard lead time is 4-6 weeks from date of order.
Engineered-to-OrderThese products are a custom designed product that is 100% fi t-for-purpose, delivered onsite and ready for installation. Our design & engineering team can customise an enclosure to suit the application requirements. Contact us for more information.
IP
PROTECTION RATING
Indicates the degree of protection of an electrical
enclosure against intrusion of foreign bodies (dust, dirt, water).
INSTALLATION PARAMETERSThe installation parameters include the where, how and what available space
there is. This will determine the correct solution to meet your needs.
DESIGN COMPLIANCE
When designing a system product, compliance is essential. At this stage of
the buying process, the choosing of a solution is based on several criteria.
WHERE TO BUY
At B&R we utilise a range of channels where our customers can buy our
product. For all our products we utilise a distribution network of electrical wholesalers and specialised data
companies.
SUPPLY CONFIGURATIONS
Choose from three (3) supply confi gurations:Loose, metal ware assembled or fully
assembled and wired.
CONNECT & COMMISSION
The solution provided by B&R is now ready for connection and
commission stage.
At B&R, we have four (4) manufacturing supply options (see below for more
information). These options ensure that our most common products are available direct from B&R when you need them. When you
place your order our customer service team will advise you of the delivery time.
DELIVERY
B&R’s HDC enclosures provide a solution for Fibre-To-The-Home (FTTH) connectivity, suitable for fibre and copper cables. They can be either surface or flush mounted. These enclosures meet the guidelines outlined in NBN's Residential Preparation and Installation Guidelines.
Are you NBN ready?
home networking enclosures
Supplied with double GPO – Specifi c models are supplied with double GPO
compliant with AS/NZS3000.
Cable entries providepre-punched knockouts for
easy cable access.
Power supply unit – Mounting position for NBN
battery backup power supply.
Mounting positions & holes for PSU and NTD Mounting position with
screws for standard NBN NTD enclosure fi tting.
Supplied with one 8-port patch units – No additional
costs for small patching requirements. On selected
models only.
4mm diameter bursts for easy mounting of DIN rail.
Industry standard 6" hole pattern for fl exible third
party equipment.
Hinged mounting pan allows easy access behind mounting pan to route fi bre
to NTD enclosure.
The fully featured HDC enclosure
Product Part Number
Inclusions Dimensions (mm) Window Opening (mm)Mounting Centres (mm)
GPO Patch panel Door TypeHeight
(A)Width
(B)Depth
(C)Height
(D)Width
(E)Height
(F)Width
(G)Weight
(kg)
Basic enclosureNBN-HDC01 Window 650 380 120 520 350 547 150 8.5
NBN-HDC02 Window 1000 380 120 852 350 897 150 11.5
Fully featured
NBN-HDC10 • • Window 650 380 130 520 255 540 150 9.0
NBN-HDC13 • Window 650 380 130 520 255 540 150 9.0
NBN-HDC20 • • Window 1000 380 130 852 255 850 150 12.0
NBN-HDC23 • Window 1000 380 130 852 255 850 150 12.0
NBN-HDC15 • • Metal 650 380 130 – – 540 150 10.0
NBN-HDC17 • Metal 650 380 130 – – 540 150 10.0
NBN-HDC25 • • Metal 1000 380 130 – – 850 150 13.0
NBN-HDC27 • Metal 1000 380 130 – – 850 150 13.0
NBN-HDCFK1
Product Description Part Number NB
N-H
DC
01
NB
N-H
DC
02
NB
N-H
DC
10
NB
N-H
DC
13
NB
N-H
DC
15
NB
N-H
DC
17
NB
N-H
DC
20
NB
N-H
DC
23
NB
N-H
DC
25
NB
N-H
DC
27
Flush kitSuitable for 650mm high enclosures NBN-HDCFK1 • • • • •
Suitable for 1000mm high enclosures NBN-HDCFK2 • • • • •
Home Networking EnclosuresInternal use cabinets
• A solution for Fibre-To-The-Home (FTTH) connectivity.• Suitable for both fibre and copper lines.• Can be surface or flush mounted.• Mounting positions and holes for PSU and NTD enclosure.• Easy mounting of DIN rail.• Space for additional port patch panels.• Industry standard 6 inch hole pattern.• Mounting position for NBN battery back up power supply.• Acrylic front door for Wi-Fi signal.• Patch panel (Cat5) and double GPO in fully featured product.• Manufactured from 1.0mm zinc coated steel.• Powdercoated Traffic White RAL9016.
ORDERING GUIDE
ACCESSORIES
For more information« brenclosures.com.au/nbn-enclosures.htm
RA
L901
6
TECHNICAL DRAWINGS
Home Networking EnclosuresInternal use cabinets
Front View Side View
▲ ▲▲ ▲B C
▲
▲
A
▲
▲
D
▲ ▲E
Rear View
▲ ▲G
▲
▲
F
Product Description Part Number
Key LocksKeyed to 92268 complete with fixings TKL/92268
Keyed to L331 complete with fixings TKL/L331
ACCESSORIES
Telecom BDBuilding & Campus Distribution
• Suitable for voice or data cabling for up to 500 pairs at or beyond the network boundary.
• Supplied complete with surrounds to enable flush or surface mounting.
• Flush mount door design on A Series enclosures.• Backmount frame and earthing strap.• A Series IP30 and B Series IP54.• Manufactured from 1.0mm zinc coated steel.• Powdercoated Light Grey RAL7035.
Comes standard with:• Coin operated camlock• Back mount frame• Earthing strips on 20 pair enclosures only• Jumper guides on 100, 250 and 500 pair enclosures• Adjustable depth surrounds
ORDERING GUIDE
RA
L703
5 IP30
IP54
Dimensions (mm)
External Mounting Centre Cable Entry Knockouts
Part Number ApplicationHeight
(A)Width
(B)Depth
(C)Usable Depth
(D)Height
(E)Width
(F)Height
(G)Width
(H)Width
(J)Size(K)
Weight (kg) Modules
A20 Internal 200 200 55 42 138 150 20 50 72 3 x ø26 / 17 1.5 2
A100 Internal 390 290 90 77 300 230 25 100 86 3 x ø33 / 21 4.0 11
A250 Internal 800 290 100 87 700 220 50 150 186 4 x ø52 / 41 8.5 27
A500 Internal 800 450 100 87 700 350 50 200 248 5 x ø52 / 41 12.5 54
B20 External 205 305 80 61 130 230 – – 72 6 x ø26 / 17 2.5 2
B100 External 405 305 90 71 325 225 – – 86 6 x ø33 / 21 4.5 11
B250 External 800 305 100 81 675 225 – – 186 8 x ø52 / 41 9.0 27
B500 External 800 465 100 81 675 375 – – 248 10 x ø52 / 41 12.5 54
NB: 20mm flush mount surround on each side, top & bottom.
For more information« brenclosures.com.au/bd.htm
THISPRODUCT AVAILABLE IN
NZ
Telecom BDBuilding & Campus Distribution
TECHNICAL DRAWINGS
A Series
Front View
Front View
▲
▲
A
▲
▲
400
(on
A250
& A
500
serie
s)
▲
▲
A
▲
▲
400
(on
A250
& A
500
serie
s)
▲ ▲B
Side View
Side View
▲▲
▲
▲
▲
▲
D
D
▲▲
C
C
Rear View
Rear View
▲
▲
▲
▲
EE
▲
▲
▲
▲
F
F
▲
▲
G
▲▲
H
Bottom View
Bottom View
▲ ▲J K
(knockouts fl attened)
B Series
▲ ▲B
▲ ▲J K
(knockouts fl attened)
Part Number
External Dimensions (mm) Mounting Centres (mm)
RUHeight
(A)Width
(B)Depth
(C)Swing Frame
(D)Enclosure
DepthHeight
(E)Width
(F) Fixed Shelf Weight (kg)
ARWX6U450NF 6 370 600 450 – 450 220 450 1 18.0
ARWX6U450 6 370 600 550* 100 450 220 450 1 23.0
ARWX9U450 9 500 600 550* 100 450 350 450 1 27.0
ARWX12U450NF 12 635 600 450 – 450 485 450 1 24.0
ARWX12U450▲ 12 635 600 550* 100 450 485 450 1 32.0
ARWX12U600 12 635 600 700* 100 600 485 450 1 38.0
ARWX18U450 18 905 600 550* 100 450 755 450 2 39.0
ARWX18U600 18 905 600 700* 100 600 755 450 2 45.0
ARWX24U450 24 1175 600 550* 100 450 1025 450 2 46.0
ARWX24U600 24 1175 600 700* 100 600 1025 450 2 52.0
▲ Available on Request
* Includes depth of swing frame 100mm
Ausrack Wall onyX19 inch wall mount cabinets
Mat
te
Bla
ck
• Suitable for housing networking equipment including patch panels, modems and routers.
• Wall mounted cabinets that are easy-to-install.• Provide maximum accessibility for maintenance.• With rear swing frame on selected models, allowing access to the
rear of the enclosure.• Removable side panels.• Manufactured from 1.2mm SPCC rolled steel.• Powdercoated textured matte black.
Comes standard with:• Reversible swing frame• Safety glass keylockable door• Adjustable 19" mounting rails• Removable side panels with key locks• Fixed shelf
ORDERING GUIDE
Side View Top View
▲
▲
65
TECHNICAL DRAWINGS
EIA-310-DCompliant
For more information« brenclosures.com.au/wall_rack_onyx.htm
50kg
LOAD
Front View
▲
▲
A
▲
▲
▲
▲
B
270
Rear View
135º
135º
▲
▲
E
▲ ▲F
▲ ▲
▲
D
▲
C
THISPRODUCT AVAILABLE IN
NZ
ARWX2F ARPCMH1U ARWX450FSARPRH ARWX450CS Rack Studs
Ausrack Wall onyX19 inch wall mount cabinets
Part Number Product Description AR
WX
6U4
50N
F
AR
WX
6U4
50
AR
WX
9U4
50
AR
WX
12U
450
NF
AR
WX
12U
450
AR
WX
12U
600
AR
WX
18U
450
AR
WX
18U
600
ARWX2F▲ Fan unit 2 fan unit • • • • • • • •
ARPRH61010
Power rails – horizontal(10A outlets only) SAA
6 x 10A outlets, 10A plug • • • • • • • •
ARPRH61015 6 x 10A outlets, 15A plug • • • • • • • •
ARPRH101010 10 x 10A outlets, 10A plug • • • • • • • •
ARPRH101015 10 x 10A outlets, 15A plug • • • • • • • •
ARDXM12U06Mesh steel doors
To suit 12RU cabinets • • •
ARDXM18U06 To suit 18RU cabinets • •
ARPCMH1U Horizontal cable management 1RU • • • • • • • •
ARWX450FS▲ Fixed shelf - 30kg load, black 285mm • • • • • • • •
ARWX450CS Cantilever shelf - 10kg load, black 450mm • • • • • • • •
ARFXKEYR Spare key Door, swing frame • • • • • • • •
ARCN Cage nuts Pack of 50 • • • • • • • •
ARSTUD100▲
Rack StudsPack of 100 • • • • • • • •
ARSTUD20▲ Pack of 20 • • • • • • • •
▲ Available on Request
ACCESSORIES
Part Number
External Dimensions (mm) Mounting Centres (mm)
RUHeight
(A)Width
(B)Depth
(C)Total Depth*
(D)Height
(E)Height
(F)Width
(G) Equipment Rails Load Rating (kg) Weight (kg)
ARW6U250▲ 6 340 600 250 350 250 – – 2 24.0 14.5
ARW6U350▲ 6 340 600 350 450 350 – – 2 24.0 17.0
ARW6U450▲ 6 340 600 450 550 450 – – 2 24.0 19.0
ARW6U600▲ 6 340 600 600 700 600 – – 4 24.0 23.0
ARW12U250▲ 12 607 600 250 350 250 – – 2 48.0 19.5
ARW12U350▲ 12 607 600 350 450 350 – – 2 48.0 22.0
ARW12U450▲ 12 607 600 450 550 450 – – 2 48.0 25.0
ARW12U600▲ 12 607 600 600 700 600 – – 4 48.0 31.5
ARW18U350▲ 18 874 600 350 450 785 275 117.5 4 72.0 29.0
ARW18U450▲ 18 874 600 450 550 785 275 117.5 4 72.0 32.0
ARW18U600▲ 18 874 600 600 700 785 275 117.5 4 72.0 35.0
ARW24U350▲ 24 1141 600 350 450 1051 410 116 4 96.0 36.0
ARW24U450▲ 24 1141 600 450 550 1051 410 116 4 96.0 39.0
ARW24U600▲ 24 1141 600 600 700 1051 410 116 4 96.0 45.0
* Includes depth of swing frame 60mm and door bevel of 40mm▲ Available on request
Ausrack Wall19 inch wall mount cabinets
RA
L703
5
• Typically used for the housing of patch panels and network equipment where floor space is at a premium.
• Acrylic front door for viewing of equipment.• Vented sides• Reversible hinged front door and swing frame.• Rear swing frame for easy access with same key codes for swing
frame and front door.• Manufactured from:
Frame – 2.0mm zinc coated steelPanel – 1.2mm zinc coated steel
• Powdercoated Light Grey RAL7035.
Comes standard with:• 2 or 4 adjustable 19" rails• Same key locks front and rear• 2 keys (keyed CL001)
ORDERING GUIDE
EIA-310-DCompliant
For more information« brenclosures.com.au/wall_rack.htm
THISPRODUCT AVAILABLE IN
NZ
Part Number Product Description AR
W6U
250
AR
W6U
350
AR
W6U
450
AR
W6U
600
AR
W12
U25
0
AR
W12
U35
0
AR
W12
U45
0
AR
W12
U60
0
AR
W18
U35
0
AR
W18
U45
0
AR
W18
U60
0
AR
W24
U35
0
AR
W24
U45
0
AR
W24
U60
0
ARW250FSFixed shelves - light grey RAL7035(Requires 4 mounting rails to install)
1RU high x 250mm deep • • • • • • • • • • • •
ARW350FS 1RU high x 350mm deep • • • • • • • •
ARW500FS 1RU high x 500mm deep • • • •
ARW150CS
Cantilever shelves - black
2RU high x 150mm deep • • • • • • • • • • • • • •
ARW250CS▲ 2RU high x 250mm deep • • • • • • • • • • • •
ARW350CS 2RU high x 350mm deep • • • • • • • •
ARW450CS 2RU high x 450mm deep • • • •
ARPCMH1U Horizontal cable management 1RU • • • • • • • • • • • • • •
ARHCMF1UHorizontal cable managementfingers & cover panels
1RU • • • • • • • • • • • • • •
ARHCMF2U 2RU • • • • • • • • • • • • • •
ARHCMF4U 4RU • • • • • • • • • • • • • •
ARPRH61010
Power rails – horizontal(10A outlets only) SAA
6 x 10A outlets, 10A plug • • • • • • • • • • • • • •
ARPRH61015 6 x 10A outlets, 15A plug • • • • • • • • • • • • • •
ARPRH101010 10 x 10A outlets, 10A plug • • • • • • • • • • • • • •
ARPRH101015 10 x 10A outlets, 15A plug • • • • • • • • • • • • • •
ARPAF2 2-way fan kit Requires 4 mounting rails to install • • • • • • • • • • • • • •
ARBP6U Blanking panel 6RU • • • • • • • • • • • • • •
ARWMR6UMounting rail pair
6RU • • • •
ARWMR12U 12RU • • • •
ARCN Cage nuts 50 pack • • • • • • • • • • • • • •
ARSTUD100▲
Rack StudsPack of 100 • • • • • • • • • • • • • •
ARSTUD20▲ Pack of 20 • • • • • • • • • • • • • •
▲ Available on Request
Ausrack Wall19 inch wall mount cabinets
ACCESSORIES
TECHNICAL DRAWINGS
▲
▲
A
▲ ▲▲B 60
Front View Side View Rear View Swing Frame Entries
▲ ▲
▲
C
▲
D
▲ ▲▲ ▲ ▲▲225 7545
▲▲
450
▲
▲
▲
▲▲
FG
E
▲
▲ ▲
51▲ ▲
50▲ ▲
100
▲ ▲251
Part Number
Dimensions (mm)
RUHeight*
(A)Width
(B)Depth
(C) Total Height Weight (kg)
ARFX6622U 22 1115 600 600 1185 61.0
ARFX6822U 22 1115 600 800 1185 74.0
ARFX6632U 32 1550 600 600 1620 80.0
ARFX6832U 32 1550 600 800 1620 96.0
ARFX6932U 32 1550 600 960 1620 106.0
ARFX6642U 42 1995 600 600 2065 97.0
ARFX6842U 42 1995 600 800 2065 105.0
ARFX6942U 42 1995 600 960 2065 123.0
ARFX6647U 47 2220 600 600 2290 109.0
ARFX6847U 47 2220 600 800 2290 117.0
ARFX6947U 47 2220 600 960 2290 137.0
ARFX8942U 42 1995 800 960 2065 167.0
ARFX8947U 47 2220 800 960 2290 179.0
* Height does not include feet or castors
Ausrack Floor onyX19 inch light duty network cabinets
Mat
te
Bla
ck
• Suitable for housing networking equipment including patchpanels, modems and routers.
• Load rating tested to AS62208-2006.• Manufactured from SPCC rolled steel.• Powdercoated textured matte black.
Comes standard with:• Frame and 2 x removable side panels• Front tempered tinted safety glass window door• Key lockable swing handle (keyed to 92268) on front and rear steel door• 4 x full height RU marked and notched mounting rail• 4 x full height vertical cable management systems with snap cover and
internal cable rings (800mm wide cabinets only)• Fixed shelf or shelves (1 on 22RU, 2 on 32RU and 3 for all other heights)• 10-way Australian 3-Pin power rail• Adjustable feet and braked castor kit• Roof mounted fan unit with thermostat
(2-way for ≤ 600mm deep, 4-way for 800 / 960mm deep)
ORDERING GUIDE
EIA-310-DCompliant
SSI
Compliant
For more information« brenclosures.com.au/ausrack_floor_onyx.htm
1000kg
LOADTHIS
PRODUCT AVAILABLE INN
Z
Part Number Product Description AR
FX66
22U
AR
FX6
822U
AR
FX66
32U
AR
FX6
832U
AR
FX69
32U
AR
FX66
42U
AR
FX6
842
U
AR
FX
6942
U
AR
FX66
47U
AR
FX6
847
U
AR
FX
6947
U
AR
FX89
42U
AR
FX89
47U
ARDXM22U06
Mesh steel doors(60% open mesh)
22RU x 600mm wide • •
ARDXM32U06 32RU x 600mm wide • • •
ARDXM42U06 42RU x 600mm wide • • •
ARDXM42U08 42RU x 800mm wide •
ARDXM47U06 47RU x 600mm wide • • •
ARDXM47U08 47RU x 800mm wide •
ARDXDD42U06
Split mesh double doors(60% open mesh)
42RU x 600mm wide •
ARDXDD42U08 42RU x 800mm wide •
ARDXDD47U06 47RU x 600mm wide •
ARDXDD47U08 47RU x 800mm wide •
ARXFL350
Fixed shelves - 20kg load, black
1RU high x 350 deep • • • •
ARXFL550 1RU high x 550 deep • • • •
ARXFL710 1RU high x 710 deep • • • • •
ARWX450CS Cantilever shelves - 10kg load, black 2RU high x 450 deep • • • • • • • • • • • • •
ARXKBC350
Keyboard shelves - 10kg load, black
1RU high x 350 deep • • • •
ARXKBC550 1RU high x 550 deep • • • •
ARXKBC710 1RU high x 710 deep • • • • •
ARPCMH1U Horizontal cable management Rings – 1RU • • • • • • • • • • • • •
ARHCMF1UHorizontal cable management fingers & cover panels
1RU • • • • • • • • • • • • •
ARHCMF2U 2RU • • • • • • • • • • • • •
ARHCMF4U 4RU • • • • • • • • • • • • •
ARPRH61010
Power rails – horizontal(10A outlets only) SAA
6 x 10A outlets, 10A plug • • • • • • • • • • • • •
ARPRH61015 6 x 10A outlets, 15A plug • • • • • • • • • • • • •
ARPRH101010 10 x 10A outlets, 10A plug • • • • • • • • • • • • •
ARPRH101015 10 x 10A outlets, 15A plug • • • • • • • • • • • • •
ARFXKEYFSpare keys
Front door • • • • • • • • • • • • •
ARFXKEYR Rear door • • • • • • • • • • • • •
ARXSPL Side panel lock kit Single lock • • • • • • • • • • • • •
ARFXBK Baying kit Brackets • • • • • • • • • • • • •
ARCN Cage nuts 50 pack • • • • • • • • • • • • •
ARSTUD100▲
Rack StudsPack of 100 • • • • • • • • • • • • •
ARSTUD20▲ Pack of 20 • • • • • • • • • • • • •
▲ Available on Request
Ausrack Floor onyX19 inch light duty network cabinets
ACCESSORIES
TECHNICAL DRAWINGS
▲
▲
A
▲ ▲▲ ▲B C
Front View Side View
▲
▲
▲
▲
340
340
Top View
Bottom View
▲▲
16558 55
▲ ▲▲▲ ▲
▲
260
▲
C
Ausrack Floor Server onyX19 inch light duty server cabinets
Mat
te
Bla
ck
• Suitable for use in large data room applications that require a robust and fully featured server racking solution with free flowing movement.
• Features include a 10-way Australian 3-Pin power rail.• Load rating tested to AS62208-2006• Manufactured from:
Frame – 2.0mm zinc coated steelPanel – 1.2mm zinc coated steel
• Powdercoated textured matte black.
Comes standard with:• Frame and 2 x removable side panels• Key lockable swing handle (keyed to 92268) front mesh door and split mesh rear doors• 4 x full height RU marked and notched adjustable mounting rails• 4 x full height vertical cable management systems with snap cover and
internal cable rings (800mm wide cabinets only)• 3 x fixed shelves• Roof mounted 4-way fan unit with thermostat and 10-way Australian 3Pin power rail• Adjustable feet and braked castor kit• 20 x cage nuts and screws with insertion / removal tool
ORDERING GUIDE
EIA-310-DCompliant
SSI Standards
Compliant
Dimensions (mm)
Part Number RUHeight
(A)Width
(B)Depth
(C) Total Height Weight (kg)
ARSX6842U 42 1995 600 800 2065 105.0
ARSX6942U 42 1995 600 960 2065 123.0
ARSX6847U 47 2220 600 800 2290 117.0
ARSX6947U 47 2220 600 960 2290 137.0
ARSX8842U 42 1995 800 800 2065 150.0
ARSX8942U 42 1995 800 960 2065 167.0
ARSX8847U 47 2220 800 800 2290 165.0
ARSX8947U 47 2220 800 960 2290 179.0
For more information« brenclosures.com.au/ausrack-floor-server-onyx.htm
TECHNICAL DRAWINGS
▲
▲
A
▲ ▲▲ ▲B C
Front View Side View
▲
▲
340
Top View
▲
▲
340
Bottom View
▲▲
16558 55
▲ ▲▲▲ ▲
▲
260
▲
C
THISPRODUCT AVAILABLE IN
NZ1000kg
LOAD
Part Number Product Description AR
SX
68
42U
AR
SX
6942
U
AR
SX
68
47U
AR
SX
6947
U
AR
SX
88
42U
AR
SX
8942
U
AR
SX
88
47U
AR
SX
8947
U
ARDXM42U06
Mesh steel door(60% open mesh)
42RU x 600mm wide • •
ARDXM47U06 47RU x 600mm wide • •
ARDXM42U08 42RU x 800mm wide • •
ARDXM47U08 47RU x 800mm wide • •
ARDXDD42U06
Mesh steel door – split(60% open mesh)
42RU x 600mm wide • •
ARDXDD47U06 47RU x 600mm wide • •
ARDXDD42U08 42RU x 800mm wide • •
ARDXDD47U08 47RU x 800mm wide • •
ARXFL550Fixed shelves - 20kg load, black
1RU high x 550 deep • • • •
ARXFL710 1RU high x 710 deep • • • •
ARWX450CS Cantilever shelves - 10kg load, black 2RU high x 450 deep • • • • • • • •
ARXKBC550Keyboard shelves
1RU high x 550 deep • • • •
ARXKBC710 1RU high x 710 deep • • • •
ARPCMH1U Horizontal cable management Rings – 1RU • • • • • • • •
ARHCMF1UHorizontal cable management fingers& cover panels
1RU • • • • • • • •
ARHCMF2U 2RU • • • • • • • •
ARHCMF4U 4RU • • • • • • • •
ARPRH61010
Power rails – horizontal(10A outlets only) SAA
6 x 10A outlets, 10A plug • • • • • • • •
ARPRH61015 6 x 10A outlets, 15A plug • • • • • • • •
ARPRH101010 10 x 10A outlets, 10A plug • • • • • • • •
ARPRH101015 10 x 10A outlets, 15A plug • • • • • • • •
ARBP6U Blanking panels (black) 6RU • • • • • • • •
ARSXKEY Spare keys Door key • • • • • • • •
ARXSPL Side panel lock kit Single lock • • • • • • • •
ARFXBK Baying kit Brackets • • • • • • • •
ARCN Cage nuts 50 pack • • • • • • • •
ARSTUD100▲
Rack StudsPack of 100 • • • • • • • •
ARSTUD20▲ Pack of 20 • • • • • • • •
▲ Available on Request
ARHCMF ARPRH61010ARPCMH1UARXFLARDXM & ARDXDD
Ausrack Floor Server onyX19 inch light duty server cabinets
ACCESSORIES
With a unique understanding of the data applications, B&R manufacture and supply the highest quality 19" data cabinets providing you with the ultimate in flexibility whatever your requirements.
The highest quality data cabinet providingthe ultimate in flexibility.
Ausrack Plus
Access around sides of installed equipment – Inset corner posts and cable zones allow access around sides of the installed equipment, making the possibility of new installs and retro fi touts easy.
Over 30 cable entry points in top and bottom – With so many cable entry points in the top and bottom of the rack, it makes fi nding a location that suits your cabling requirements a breeze.
Inset corner posts – A unique feature exclusive to B&R data products. With the inset corner posts as close to the equipment as possible and ensuring the frame is fully welded.
The ultimate in flexibility – With no corner posts to limit the size of the doors, the Ausrack Plus frames can have a full width door fi tted. By using B&R's mesh doors, the equipment installed gets maximum airfl ow through the cabinet.
Features of the Ausrack Plus data cabinet.
Combining accessories provides a total product solution – Combining the Ausrack Plus cabinets together with a cable zone system, you can quickly and easily create cable looms and cross cabinet cabling. Add in the Ausrack cable management systems and you have a clean install with maximum airfl ow to keep equipment cool.
Part Number RU
Dimensions (mm)
Maximum Rail Depth^
Height(A)
Width(B)
Depth(C) Weight (kg)
AS24U609* 24 1202 600 900 756 91.0
AS24U611* 24 1202 600 1100 956 97.5
AS40U609# 40 1913 600 900 756 123.0
AS40U611# 40 1913 600 1100 956 139.5
AS45U609# 45 2135 600 900 756 134.0
AS45U611# 45 2135 600 1100 956 149.0
AS40U809# 40 1913 800 900 756 132.0
AS40U811# 40 1913 800 1100 956 142.0
AS45U809# 45 2135 800 900 756 135.0
AS45U811# 45 2135 800 1100 956 145.0
* 24RU cabinets also supplied with ARTF flat top cover# 40 & 45RU cabinets are supplied with gland plates fitted into roof^ The maximum distance between mounting rails
STATIC
1400kg
SEISMIC
900kg
Ausrack Plus Server19 inch server cabinets
Mat
te
Bla
ck
• Suitable for use in large data room applications that require a robust and fully featured server racking solution with free flowing movement.
• Essential platform for flexible computing solutions.• Designed with a high load rating and inset corner posts.• Combines versatility and strength with easy-to-use features.• Inbuilt 65mm plinth• Manufactured from:
Frame – 1.6mm zinc coated steelRail – 2.0mm zinc coatedPanel – 1.2mm zinc coated steel
• Powdercoated textured matte black.
Comes standard with:• 4 x RU marked adjustable mounting rails• Mesh doors (600mm wide cabinets)• Front & rear split mesh doors (800mm wide cabinets)• Removable side panels• Lockable wing knob with 2-point locking (keyed to 92268)
ORDERING GUIDE
EIA-310-DCompliant
SSI Standards
Compliant
For more information« brenclosures.com.au/server_cabinet.htm
ACCESSORIES Page No.
Doors 32-34
Top Covers 34
Side Panels 35
Privacy Panels 35
Cable Zones 36
Shelves 42
Cable Trays 42
Fans 43
General & Mounting Accessories 43
Airfl ow Effi ciency Products 50-51
Power Rails 53
Cable Management 54
ACCESSORIES QUICK SELECTION
THISPRODUCT AVAILABLE IN
NZ
Ausrack Plus Server19 inch server cabinets
TECHNICAL DRAWINGS
Front View Side View
▲
▲
A
▲ ▲B
▲ ▲C
For top and bottom view dimensions see Ausrack Plus Frames on pages 28-31.
Part Number RU
Dimensions (mm)
Height(A)
Width(B)
Depth(C)
Maximum Rail Depth^ Weight (kg)
AN24U606* 24 1202 600 600 456 77.0
AN24U609* 24 1202 600 900 756 89.5
AN40U606# 40 1913 600 600 456 105.5
AN40U609# 40 1913 600 900 756 123.5
AN45U606# 45 2135 600 600 456 115.0
AN45U609# 45 2135 600 900 756 135.0
AN40U809#▲ 40 1913 800 900 756 140.0
AN45U809#▲ 45 2135 800 900 756 160.0
▲ Available on Request* 24RU cabinets also supplied with ARTF flat top cover# 40 & 45RU cabinets are supplied with gland plates fitted into roof^ The maximum distance between mounting rails
Ausrack Plus Network19 inch network cabinets
• Suitable for use in large data room applications that require a robust and fully featured server racking solution with free flowing movement.
• Essential platform for flexible computing solutions.• Designed with a high load rating and inset corner posts.• Combines versatility and strength with easy-to-use features.• Inbuilt 65mm plinth• Manufactured from:
Frame – 1.6mm zinc coated steelRail – 2.0mm zinc coatedPanel – 1.2mm zinc coated steel
• Powdercoated textured matte black.
Comes standard with:• Frame and 2 x removable side panels• Front reinforced tinted acrylic window door and rear steel door• 2-point locking doors with key lockable wing knob• 4 x full height RU marked adjustable mounting rails• Flat top cover (24RU racks only)• Gland Plates (40 & 45RU cabinets only)
ORDERING GUIDE
For more information« brenclosures.com.au/network_rack.htm
STATIC
1400kg
SEISMIC
900kgMat
te
Bla
ck EIA-310-DCompliant
SSI Standards
Compliant
ACCESSORIES Page No.
Doors 32-34
Top Covers 34
Side Panels 35
Privacy Panels 35
Cable Zones 36
Shelves 42
Cable Trays 42
Fans 43
General & Mounting Accessories 43
Airfl ow Effi ciency Products 50-51
Power Rails 53
Cable Management 54
ACCESSORIES QUICK SELECTION
THISPRODUCT AVAILABLE IN
NZ
Ausrack Plus Network19 inch network cabinets
TECHNICAL DRAWINGS
Front View Side View
▲
▲
A
▲ ▲B
▲ ▲C
For top and bottom view dimensions see Ausrack Plus Frames on pages 28-31.
Ausrack Plus Frame 600mm wide19 inch frame
• Designed for complete flexibility in medium to large data room applications.• Can be configured into suites and clad as per application requirements.• Features include inset corner posts.• Manufactured from:
Frame – 1.6mm zinc coated steelRail – 2.0mm zinc coated
• Powdercoated textured matte black.
Comes standard with:• 4 x RU marked adjustable mounting rails• Flat top cover (18, 24 & 27RU)• Gland plates (40, 42, 45, 47 & 48RU)• Bolt down brackets
TECHNICAL DRAWINGS
For more information« brenclosures.com.au/ausrack-plus-frame.htm
STATIC
1400kg
SEISMIC
900kgMat
te
Bla
ck EIA-310-DCompliant
SSI Standards
Compliant
Front View
▲
▲
A
▲ ▲B
Bottom View
▲ ▲▲ ▲
200200360331.6
▲
▲▲
3025 ▲▲
▲▲
▲
▲
▲
5050
▲
▲
▲
▲
▲
DE
▲
▲
▲
▲
▲
▲
C
120
240
65▲▲▲
10
40
225 12
576 ▲
▲ ▲
▲
▲ ▲
▲
Top View
▲ ▲65
▲
▲
C
▲
▲
▲
▲
▲
5050
▲
▲
▲
DC
-144
▲ ▲▲ ▲▲ ▲
300
360
150
30
▲▲▲
▲▲
▲
▲
▲▲
225 12
576
25
▲10
40
▲ ▲
THISPRODUCT AVAILABLE IN
NZ
Cable Capacity for Cable Entry Points
Cat5e Cat6 Cat6e Cat7 Fibre Power 10A Power 15A
Diameter (mm) # 5.6 6.3 8.4 7.6 3 7 8.5
Saturation * 60% 60% 60% 60% 70% 20% 20%
Cable Entries(per entry)
Ausrack Plus 600W side 125 99 56 68 506 27 18
Ausrack Plus front/rear 104 82 47 57 421 23 15
Ausrack Plus 50mm hole 41 33 19 23 166 1 1
# These are nominal values for the OD of cable as sizes may vary. B&R Enclosures does not accept liability for any errors within the above table.* Recommended maximum cable saturation.
Ausrack Plus Frame 600mm wide19 inch frame
Part Number RU
Dimensions (mm)
Maximum Rail Depth^
Height(A)
Width(B)
Depth(C)
Cable Apeture (D)
Bolt Down(E)
Weight (kg)
AF18U606* 18 936 600 600 300 251.1 456 43.0
AF18U608* 18 936 600 800 300 451.1 656 47.0
AF18U609* 18 936 600 900 600 551.1 756 50.5
AF18U610* 18 936 600 1000 600 651.1 856 53.0
AF18U611* 18 936 600 1100 750 751.1 956 55.0
AF18U612* 18 936 600 1200 750 851.1 1056 57.0
AF24U606* 24 1202 600 600 300 251.1 456 47.5
AF24U608* 24 1202 600 800 300 451.1 656 51.5
AF24U609* 24 1202 600 900 600 551.1 756 55.5
AF24U610* 24 1202 600 1000 600 651.1 856 58.5
AF24U611* 24 1202 600 1100 750 751.1 956 61.5
AF24U612* 24 1202 600 1200 750 851.1 1056 64.5
AF27U606* 27 1336 600 600 300 251.1 456 50.0
AF27U608* 27 1336 600 800 300 451.1 656 54.0
AF27U609* 27 1336 600 900 600 551.1 756 58.0
AF27U610* 27 1336 600 1000 600 651.1 856 61.5
AF27U611* 27 1336 600 1100 750 751.1 956 65.0
AF27U612* 27 1336 600 1200 750 851.1 1056 68.5
AF40U606# 40 1913 600 600 300 251.1 456 59.5
AF40U608# 40 1913 600 800 300 451.1 656 64.0
AF40U609# 40 1913 600 900 600 551.1 756 69.0
AF40U610# 40 1913 600 1000 600 651.1 856 74.0
AF40U611# 40 1913 600 1100 750 751.1 956 79.5
AF40U612# 40 1913 600 1200 750 851.1 1056 85.0
AF42U606# 42 2002 600 600 300 251.1 456 62.0
AF42U608# 42 2002 600 800 300 451.1 656 66.0
AF42U609# 42 2002 600 900 600 551.1 756 70.5
AF42U610# 42 2002 600 1000 600 651.1 856 76.0
AF42U611# 42 2002 600 1100 750 751.1 956 82.0
AF42U612# 42 2002 600 1200 750 851.1 1056 88.0
AF45U606# 45 2135 600 600 300 251.1 456 65.0
AF45U608# 45 2135 600 800 300 451.1 656 69.0
AF45U609# 45 2135 600 900 600 551.1 756 73.5
AF45U610# 45 2135 600 1000 600 651.1 856 79.0
AF45U611# 45 2135 600 1100 750 751.1 956 85.0
AF45U612# 45 2135 600 1200 750 851.1 1056 91.0
AF47U606# 47 2225 600 600 300 251.1 456 67.0
AF47U608# 47 2225 600 800 300 451.1 656 71.0
AF47U609# 47 2225 600 900 600 551.1 756 75.5
AF47U610# 47 2225 600 1000 600 651.1 856 81.0
AF47U611# 47 2225 600 1100 750 751.1 956 87.0
AF47U612# 47 2225 600 1200 750 851.1 1056 93.0
AF48U606# 48 2270 600 600 300 251.1 456 68.0
AF48U608# 48 2270 600 800 300 451.1 656 72.0
AF48U609# 48 2270 600 900 600 551.1 756 76.5
AF48U610# 48 2270 600 1000 600 651.1 856 82.0
AF48U611# 48 2270 600 1100 750 751.1 956 88.0
AF48U612# 48 2270 600 1200 750 851.1 1056 94.0
* 18, 24 & 27RU cabinets also supplied with ARTF flat top cover# 40, 42, 45, 47 & 48RU cabinets are supplied with gland plates fitted into roof^ The maximum distance between mounting rails
ORDERING GUIDE
ACCESSORIES Page No.
Doors 32-34
Top Covers 34
Side Panels 35
Privacy Panels 35
Cable Zones 36
Shelves 42
Cable Trays 42
Fans 43
General & Mounting Accessories 43
Airfl ow Effi ciency Products 50-51
Power Rails 53
Cable Management 54
ACCESSORIES QUICK SELECTION
▲
▲
A
▲
B▲
Front View Bottom View
▲ ▲▲ ▲
200300
▲ ▲ ▲125 ▲▲30
360
▲▲ 331.6
225 12
576
▲
▲
▲
▲
▲
▲
▲
▲
▲
5050
▲
▲
▲
D
▲
▲
E
▲ ▲▲ ▲
▲
▲
▲
▲
▲
C
120
240
65
▲ ▲35 100
Top View
▲
▲
C
▲▲
65
▲ ▲▲ ▲
300250
▲ ▲ ▲125
▲▲
30 360
225 12
576 ▲
▲
▲
5050
▲
▲
▲
D
▲ ▲ ▲▲35 100
▲
▲
▲
▲
▲
▲
Ausrack Plus Frame 800mm wide19 inch frame
• Designed for complete flexibility in medium to large data room applications.• Can be configured into suites and clad as per application requirements.• Features include inset corner posts.• Manufactured from:
Frame – 1.6mm zinc coated steelRail – 2.0mm zinc coated
• Powdercoated textured matt black.
Comes standard with:• 4 x RU marked adjustable mounting rails• Flat top cover (18, 24 & 27RU)• Gland plates (40, 42, 45, 47 & 48RU)• Bolt down brackets
TECHNICAL DRAWINGS
For more information« brenclosures.com.au/ausrack-plus-frame.htm
STATIC
1400kg
SEISMIC
900kgMat
te
Bla
ck EIA-310-DCompliant
SSI Standards
Compliant
THISPRODUCT AVAILABLE IN
NZ
Cable Capacity for Cable Entry Points
Cat5e Cat6 Cat6e Cat7 Fibre Power 10A Power 15A
Diameter (mm) # 5.6 6.3 8.4 7.6 3 7 8.5
Saturation * 60% 60% 60% 60% 70% 20% 20%
Cable Entries(per entry)
Ausrack Plus 600W side 125 99 56 68 506 27 18
Ausrack Plus front/rear 104 82 47 57 421 23 15
Ausrack Plus 50mm hole 41 33 19 23 166 1 1
# These are nominal values for the OD of cable as sizes may vary. B&R Enclosures does not accept liability for any errors within the above table.* Recommended maximum cable saturation.
Part Number RU
Dimensions (mm)
MaximumRail Depth^
Height(A)
Width(B)
Depth(C)
Cable Apeture (D)
Bolt Down(E)
Weight (kg)
AF18U806* 18 936 800 600 300 351.1 456 49.0
AF18U808* 18 936 800 800 500 451.1 656 53.0
AF18U809* 18 936 800 900 600 551.1 756 56.5
AF18U810* 18 936 800 1000 700 651.1 856 59.0
AF18U811* 18 936 800 1100 750 751.1 956 61.0
AF18U812* 18 936 800 1200 800 851.1 1056 63.0
AF24U806* 24 1202 800 600 300 351.1 456 53.5
AF24U808* 24 1202 800 800 500 451.1 656 57.5
AF24U809* 24 1202 800 900 600 551.1 756 61.5
AF24U810* 24 1202 800 1000 700 651.1 856 64.5
AF24U811* 24 1202 800 1100 750 751.1 956 67.5
AF24U812* 24 1202 800 1200 800 851.1 1056 70.5
AF27U806* 27 1336 800 600 300 351.1 456 56.0
AF27U808* 27 1336 800 800 500 451.1 656 60.0
AF27U809* 27 1336 800 900 600 551.1 756 64.0
AF27U810* 27 1336 800 1000 700 651.1 856 67.5
AF27U811* 27 1336 800 1100 750 751.1 956 71.0
AF27U812* 27 1336 800 1200 800 851.1 1056 74.5
AF40U806# 40 1913 800 600 300 351.1 456 65.5
AF40U808# 40 1913 800 800 500 451.1 656 70.0
AF40U809# 40 1913 800 900 600 551.1 756 75.0
AF40U810# 40 1913 800 1000 700 651.1 856 80.0
AF40U811# 40 1913 800 1100 750 751.1 956 86.0
AF40U812# 40 1913 800 1200 800 851.1 1056 91.0
AF42U806# 42 2002 800 600 300 351.1 456 68.0
AF42U808# 42 2002 800 800 500 451.1 656 72.0
AF42U809# 42 2002 800 900 600 551.1 756 76.8
AF42U810# 42 2002 800 1000 700 651.1 856 82.0
AF42U811# 42 2002 800 1100 750 751.1 956 88.0
AF42U812# 42 2002 800 1200 800 851.1 1056 94.0
AF45U806# 45 2135 800 600 300 351.1 456 71.0
AF45U808# 45 2135 800 800 500 451.1 656 75.0
AF45U809# 45 2135 800 900 600 551.1 756 79.5
AF45U810# 45 2135 800 1000 700 651.1 856 88.0
AF45U811# 45 2135 800 1100 750 751.1 956 90.0
AF45U812# 45 2135 800 1200 800 851.1 1056 97.0
AF47U806# 47 2225 800 600 300 351.1 456 73.0
AF47U808# 47 2225 800 800 500 451.1 656 77.0
AF47U809# 47 2225 800 900 600 551.1 756 81.5
AF47U810# 47 2225 800 1000 700 651.1 856 87.0
AF47U811# 47 2225 800 1100 750 751.1 956 93.0
AF47U812# 47 2225 800 1200 800 851.1 1056 99.0
AF48U806# 48 2270 800 600 300 351.1 456 74.0
AF48U808# 48 2270 800 800 500 451.1 656 78.0
AF48U809# 48 2270 800 900 600 551.1 756 82.5
AF48U810# 48 2270 800 1000 700 651.1 856 88.0
AF48U811# 48 2270 800 1100 750 751.1 956 94.0
AF48U812# 48 2270 800 1200 800 851.1 1056 100.0
* 18, 24 & 27RU cabinets also supplied with ARTF flat top cover# 40, 42, 45, 47 & 48RU cabinets are supplied with gland plates fitted into roof^ The maximum distance between mounting rails
Ausrack Plus Frame 800mm wide19 inch frame
ORDERING GUIDE
ACCESSORIES Page No.
Doors 32-34
Top Covers 34
Side Panels 35
Privacy Panels 35
Cable Zones 36
Shelves 42
Cable Trays 42
Fans 43
General & Mounting Accessories 43
Airfl ow Effi ciency Products 50-51
Power Rails 53
Cable Management 54
ACCESSORIES QUICK SELECTION
32 Data ICT
ARDD
Mesh DoorsTo maximise airfl ow to the Ausrack Plus data cabinet, all mesh doors consist of 63% open mesh and include a lockable wing knob and two point locking as standard (keyed to 92268). Electronic remote controlled, monitored locking systems, swing handles,custom keying and 3-point locking (ARP3L) available on request.
To suit cabinets & frames
Part Number Description RU Width (mm)
ARDM18U06
Mesh steel doors - single(63% open mesh)
18 600
ARDM18U08 18 800
ARDM24U06 24 600
ARDM24U08 24 800
ARDM27U06 27 600
ARDM27U08 27 800
ARDM40U06 40 600
ARDM40U08 40 800
ARDM42U06 42 600
ARDM42U08 42 800
ARDM45U06 45 600
ARDM45U08 45 800
ARDM47U06 47 600
ARDM47U08 47 800
ARDM48U06 48 600
ARDM48U08 48 800
ARDD18U06
Mesh steel door – split(63% open mesh)
18 600
ARDD18U08 18 800
ARDD24U06 24 600
ARDD24U08 24 800
ARDD27U06 27 600
ARDD27U08 27 800
ARDD40U06 40 600
ARDD40U08 40 800
ARDD42U06 42 600
ARDD42U08 42 800
ARDD45U06 45 600
ARDD45U08 45 800
ARDD47U06 47 600
ARDD47U08 47 800
ARDD48U06 48 600
ARDD48U08 48 800
ARDM
Pressure Loss vs Impact Velocity For Various Open Area Perforated PlatesSource: Industrial Perforators Association (1993)
Why 63% mesh doors will work for you.In many applications of mesh doors, the pressure loss through the door is one of the design considerations. In most situations the air impact velocity on the door won't be much over 1.5m/s.
As seen in the graph, B&R's 63% mesh doors will have a negligible pressure drop at these velocities. Most computer room air conditioners generate more than 20Pa of pressure, more than enough to overcome the pressure drop at the door in a containment situation.
For example, in a data centre environment, a 15kW heat load in a 45RU cabinet would require 3500m3/h of airflow. This is equivalent of a 1.35m/s impact velocity. In a containment situation with a positive aisle pressure this will be more than the pressure drop of the doors and the equipment will receive sufficient air flow.
With such a negligible restriction to airflow, the higher percentages available in the market have no real advantage. The 63% mesh was developed as a cross over point of functional performance andhigher security.
0 1 2 3 4 5 6 7 8 9 10 11 12
1500
1250
1000
750
500
250
0
PRES
SURE
LOS
S (P
a)
UNIFORM IMPACT VELOCITY (m/s)
1.35
m/s
10%
O.A
15%
O.A
20% O.A
26% O.A
30% O.A
40% O.A
50% O.A
63% O.A
Ausrack Plus AccessoriesA range of accessories to suit Ausrack Plus
Data ICT 33
ARAVARDA
Window DoorsWindow doors are available with an acrylic insert panel. An option is also available for venting for airfl ow. Suitable for all Ausrack Plus data cabinets, all doors include a lockable wing knob and two point locking as standard. (keyed to 92268) Electronic remote controlled, monitored locking systems, swing handles, custom keying and 3-point locking (ARP3L) are available on request.
To suit cabinets & frames
Part Number Description RU Width (mm)
ARDA18U06
Window door, acrylic
18 600
ARDA18U08 18 800
ARDA24U06 24 600
ARDA24U08 24 800
ARDA27U06 27 600
ARDA27U08 27 800
ARDA40U06 40 600
ARDA40U08 40 800
ARDA42U06 42 600
ARDA42U08 42 800
ARDA45U06 45 600
ARDA45U08 45 800
ARDA47U06 47 600
ARDA47U08 47 800
ARDA48U06 48 600
ARDA48U08 48 800
ARAV18U06
Window door, acrylic – vented
18 600
ARAV18U08 18 800
ARAV24U06 24 600
ARAV24U08 24 800
ARAV27U06 27 600
ARAV27U08 27 800
ARAV40U06 40 600
ARAV40U08 40 800
ARAV42U06 42 600
ARAV42U08 42 800
ARAV45U06 45 600
ARAV45U08 45 800
ARAV47U06 47 600
ARAV47U08 47 800
ARAV48U06 48 600
ARAV48U08 48 800
Ausrack Plus AccessoriesA range of accessories to suit Ausrack Plus
34 Data ICT
To suit cabinets & frames
Part Number Description RU Width (mm)
ARDS18U06
Steel doors – single
18 600
ARDS18U08 18 800
ARDS24U06 24 600
ARDS24U08 24 800
ARDS27U06 27 600
ARDS27U08 27 800
ARDS40U06 40 600
ARDS40U08 40 800
ARDS42U06 42 600
ARDS42U08 42 800
ARDS45U06 45 600
ARDS45U08 45 800
ARDS47U06 47 600
ARDS47U08 47 800
ARDS48U06 48 600
ARDS48U08 48 800
ARSS24U06
Steel doors – split
24 600
ARSS24U08 24 800
ARSS40U06 40 600
ARSS40U08 40 800
ARSS45U06 45 600
ARSS45U08 45 800
ARDS
Steel DoorsSuitable for use on all Ausrack Plus data cabinets. All steel doors include a lockable wing knob and two point locking as standard (keyed to 92268). Electronic remote controlled, monitored locking systems, swing handles, custom keying and 3-point locking (ARP3L) are available on request.
ARTF ARTR
To suit cabinets & frames
Part Number Type RU Width (mm)
ARTF606
Flat
600 600
ARTF609 600 900
ARTF611 600 1100
ARTF809 800 900
ARTF811 800 1100
ARTR606
Raised
600 600
ARTR609 600 900
ARTR611 600 1100
ARTR809 800 900
ARTR811 800 1100
Top CoversUsed to enclose the frame's top plinth section. Raised top covers feature ventilation for airfl ow and can be used in conjunction with fans (see page 43).
Ausrack Plus AccessoriesA range of accessories to suit Ausrack Plus
Data ICT 35
ARPPARP
Part Number To suit cabinets & frames
Side Panels Privacy Panels RU Depth (mm)
ARP18U06 18 600
ARP18U08 18 800
ARP18U09 18 900
ARP18U10 18 1000
ARP18U11 18 1100
ARP18U12 18 1200
ARP24U06 24 600
ARP24U08 24 800
ARP24U09 24 900
ARP24U10 24 1000
ARP24U11 24 1100
ARP24U12 24 1200
ARP27U06 27 600
ARP27U08 27 800
ARP27U09 27 900
ARP27U10 27 1000
ARP27U11 27 1100
ARP27U12 27 1200
ARP40U06 ARPP40U06 40 600
ARP40U08 ARPP40U08 40 800
ARP40U09 ARPP40U09 40 900
ARP40U10 ARPP40U10 40 1000
ARP40U11 ARPP40U11 40 1100
ARP40U12 ARPP40U12 40 1200
ARP42U06 ARPP42U06 42 600
ARP42U08 ARPP42U08 42 800
ARP42U09 ARPP42U09 42 900
ARP42U10 ARPP42U10 42 1000
ARP42U11 ARPP42U11 42 1100
ARP42U12 ARPP42U12 42 1200
ARP45U06 ARPP45U06 45 600
ARP45U08 ARPP45U08 45 800
ARP45U09 ARPP45U09 45 900
ARP45U10 ARPP45U10 45 1000
ARP45U11 ARPP45U11 45 1100
ARP45U12 ARPP45U12 45 1200
ARP47U06 ARPP47U06 47 600
ARP47U08 ARPP47U08 47 800
ARP47U09 ARPP47U09 47 900
ARP47U10 ARPP47U10 47 1000
ARP47U11 ARPP47U11 47 1100
ARP47U12 ARPP47U12 47 1200
ARP48U06 ARPP48U06 48 600
ARP48U08 ARPP48U08 48 800
ARP48U09 ARPP48U09 48 900
ARP48U10 ARPP48U10 48 1000
ARP48U11 ARPP48U11 48 1100
ARP48U12 ARPP48U12 48 1200
Side CladdingSide panels include venting and are easy-to-fi t using locating pins and slam latches. They can be locked into the frame for added security using either an external key lock kit (ARSPL) or an internal latch kit (ARSPIL).
Privacy Panels are a secure method of providing security to a single cabinet when cabinets are bayed together, by using either anon-removable panel, or a removable set of panels. These panels can also segregate air to ensure no cross cabinet mixing.
Ausrack Plus AccessoriesA range of accessories to suit Ausrack Plus
36 Data ICT
Cable ZonesDesigned for mounting onto the side of cabinet optimising accessibility and space available for cabling and cable management products. They can be incorporated into suites and are available for all 40RU and 45RU cabinets and frames. Consist of top and bottom plinths, front and rear cover panels and all fi xings required for installation onto the rack.
Cable Zones
To suit cabinets & frames
Part Number Width (mm) RU Depth (mm)
AC40U06 100 40 600
AC40U09 100 40 900
AC40U11 100 40 1100
AC45U06 100 45 600
AC45U09 100 45 900
AC45U11 100 45 1100
AC45U12 100 45 1200
AC40U206▲ 200 40 600
AC40U209 200 40 900
AC40U211 200 40 1100
AC45U206▲ 200 45 600
AC45U209 200 45 900
AC45U211 200 45 1100
AC45U212 200 45 1200
▲ Available on request
Ausrack Plus AccessoriesA range of accessories to suit Ausrack Plus
Data ICT 37
The new Gold Coast University Hospital (GCUH) is a major health facility offering tertiary level health care for South East Queensland. The hospital was built on the Greenfields site adjacent to Griffith University Gold Coast campus at a cost of $1.76 billion. With 750 beds, the facility demanded a secure and innovative IT infrastructure solution to manage sensitive patient information and ensure peace of mind.
After a 12 month tender process, B&R Enclosures were awarded the GCUH project for a two stage delivery of a central data centre and other critical data infrastructure locations around the hospital. With a proven track record in delivering data ICT projects with Queensland Health, the opportunity for B&R to join the project team was welcomed by UXC who are the largest Australian-owned ICT consultancy firm as well as Anixter, a global supplier of electrical and communications equipment. Proof of good channel management and an ability to manage small and large health projects were positive indicators of B&R’s commitment to work towards successful project completion.
In the data centre, B&R delivered a custom solution that consisted of 70 Ausrack Plus cabinets complete with vertical brush inserts, custom air duct system and PDU brackets. With airflow and security a major consideration of the data centre design – blanking panels were used to seal off the front section of the cabinets from the hot exhaust air at the rear of the cabinet. Furthermore, custom lockable cable zone covers were designed and manufactured to increase access security. By integrating cable zones into the rack design, the install was clean and efficient with the ability to quickly create cable looms and cross cabinet cabling. The decision to pursue B&R’s lockable cable zones in health care projects is becoming more common with a desire to maximise centre security and mitigate the risk of operational failure.
Supply to the hospital was in a two stage delivery, spanning two consecutive months. Specialised delivery with dedicated drops ensured all equipment was in original condition and installation could commence immediately. Since its opening, B&R representatives have conducted follow-up activities to ensure the data centre and other equipment has remained at optimum performance.
THE PROJECT
B&R Enclosure’s experience in delivering data solutions to the healthcare industry continues to grow as awarded the tender for Gold Coast University Hospital. With security and airflow as major considerations, B&R were able to deliver a customised solution for long-term functionality and reliability.
Project ProfileGold Coast University Hospital
For more information« brenclosures.com.au/project/project/gold-coast-university-hospital/
Product Part Number RU
Dimensions (mm) Bolt Down (mm)
Height(A)
Width(B)
Depth(C)
Height(D)
Width(E) Weight (kg)
Server cabinet(Includes 4 x 19” rack rails, mesh doors, side panels)
ATS45U609▲ 45 2140 600 900 299 685 137.0
ATS45U610▲ 45 2140 600 1000 299 785 144.0
ATS45U612▲ 45 2140 600 1200 299 985 159.0
ATS45U809▲ 45 2140 800 900 499 685 139.0
ATS45U810▲ 45 2140 800 1000 499 785 148.0
ATS45U812▲ 45 2140 800 1200 499 985 161.0
Standard frame(Includes 4 x 19” rack rails)
ATF45U609▲ 45 2140 600 900 299 685 77.0
ATF45U610▲ 45 2140 600 1000 299 785 82.0
ATF45U612▲ 45 2140 600 1200 299 985 96.0
ATF45U809▲ 45 2140 800 900 499 685 80.0
ATF45U810▲ 45 2140 800 1000 499 785 85.0
ATF45U812▲ 45 2140 800 1200 499 985 99.0
▲ Available on request
Ausrack TxDMultipurpose cabinets and frames
• Designed for transmission and data applications in telecommunications exchange and data centre environments.
• 4-post rack suitable for 19", 21", 23" and 26" equipment.• Open welded and bolted construction with corner posts.• Allows for maximum flexibility in placement of equipment rails
and cable management.• Manufactured from:
Frame – 1.6mm zinc coated steelRail – 2.0mm zinc coatedPanel – 1.2mm zinc coated steel
• Powdercoated textured matt black.
Comes standard with:• Frame and 2 x removable side panels• 4 x 19" RU marked adjustable mounting rails• Top cover with cable entries• Mesh doors (600mm wide cabinets)• Split mesh doors (800mm wide cabinets)• 4 x bolt down brackets
ORDERING GUIDE
For more information« brenclosures.com.au/ausrack-txd.htm
ACCESSORIES Page No.
Equipment Rails 40
Doors 40
Side Panels 40
Top Covers 41
Cable Management 54-55
Power Rails 56
Shelves 42
Cable Trays 42
Fans 43
General & Mounting Accessories 43
Airfl ow Effi ciency Products 50-51
ACCESSORIES QUICK SELECTION
STATIC
1400kg
SEISMIC
900kgMat
t B
lack
EIA-310-DCompliant
SSI Standards
Compliant
THISPRODUCT AVAILABLE IN
NZ
Ausrack TxDMultipurpose cabinets and frames
TECHNICAL DRAWINGS
▲
▲
A
Front View
▲ ▲B
Side View
▲ ▲C
Base View
▲ ▲D
▲
▲
E
40 Data ICT
To suit cabinets & frames
Part Number Description Size RU Width (mm)
ATMR45U619▲
Standard (Pair)
19" 45 600
ATMR45U621▲ 21" 45 600
ATMR45U819▲ 19" 45 800
ATMR45U821▲ 21" 45 800
ATMR45U823▲ 23" 45 800
ATMR45U826▲ 26" 45 800
ATMR45U6A▲
Reversible (Pair)
19"/21" 45 600
ATMR45U8A▲ 19"/21" 45 800
ATMR45U8B▲ 19"/23" 45 800
ATMR45U8C▲ 21"/23" 45 800
▲ Available on request
To suit cabinets & frames
Part Number RU Depth (mm)
ATSP45U09▲ 45 900
ATSP45U10▲ 45 1000
ATSP45U12▲ 45 1200
▲ Available on request
ATMR
To suit cabinets & frames
Part Number Description RU Width (mm)
ATDM45U06▲ Mesh steel door(63% open mesh)
45 600
ATDM45U08▲ 45 800
ATDD45U06▲ Mesh steel door – split(63% open mesh)
45 600
ATDD45U08▲ 45 800
ATDA45U06▲
Window door, Acrylic45 600
ATDA45U08▲ 45 800
ATDS45U06▲
Steel door45 600
ATDS45U08▲ 45 800
▲ Available on request
ATDM ATDD
ATDA ATDS
ATSP
Equipment RailsReversible equipment rails are L-shaped with mounting on either edge (i.e 19" and 21" can be placed in a 19" or 21" confi guration.
DoorsAll doors include a lockable wing knob and two point locking.
Side PanelsInclude venting and are easy to fi t using locating pins and fl ush mounted slam latches. They can be locked using an external lock kit (ATSPL). Cabinets can be bayed together with or without side panels fi tted.
Ausrack TxDA range of accessories to suit Ausrack TxD cabinets and frames
Data ICT 41
To suit cabinets & frames
Part Number Description Width (mm) Depth (mm)
ATTF609▲
Flat
600 900
ATTF610▲ 600 1000
ATTF612▲ 600 1200
ATTF809▲ 800 900
ATTF810▲ 800 1000
ATTF812▲ 800 1200
ATTC609▲
Cable entry & gland plates
600 900
ATTC610▲ 600 1000
ATTC810▲ 800 1000
ATTC812▲ 800 1200
ATTCF609▲
Fibre & cable entry
600 900
ATTCF610▲ 600 1000
ATTCF612▲ 600 1200
ATTCF809▲ 800 900
ATTCF810▲ 800 1000
ATTCF812▲ 800 1200
▲ Available on request
ATTC ATTCF
Top CoversUsed to enclose the frame's top plinth section. Come in 3 different confi gurations.
Ausrack TxDA range of accessories to suit Ausrack TxD cabinets and frames
42 Data ICT
ARFLARC210 ARFH ARKBC
Part Number Description RU Depth (mm) Load Rating (kg) To suit cabinets & frames (mm)
ARC210Cantilever
2 210 10 All
ARC360 2 360 10 All
ARPFL600
Fixed, light duty
1 450 50 600mm deep
ARPFL800▲ 1 650 50 800mm deep
ARPFL900▲ 1 750 50 900mm deep
ARPFL1000▲ 1 850 50 1000mm deep
ARPFL1100▲ 1 950 50 1100mm deep
ARPFL1200▲ 1 1050 50 1200mm deep
ARPFH600▲
Fixed, heavy duty
1 450 100 600mm deep
ARPFH800▲ 1 650 100 800mm deep
ARPFH900▲ 1 750 100 900mm deep
ARPFH1000▲ 1 850 100 1000mm deep
ARPFH1100▲ 1 950 100 1100mm deep
ARPFH1200▲ 1 1050 100 1200mm deep
ARTF450
Telescopic, full extension
1 450 20 600mm deep
ARTF750 1 750 20 900mm deep
ARTF950 1 950 20 1100mm deep
ARTH450
Telescopic, half extension
1 450 40 600mm deep
ARTH750 1 750 40 900mm deep
ARTH950 1 950 40 1100mm deep
ARKBC Keyboard pivot tray accessory* 2 – – All
▲ Available on request
* Requires half extension telescopic shelf
Cable ManagementCable management can be incorporated into Ausrack cabinets and can be used for horizontal and vertical cable management of high density cabling. For a full list of cable management accessories, see page 54.
Power RailsSuitable for use in all Ausrack cabinets. Available in 6, 10, 20-way 10A SAA outlets and 10-way IEC-C13 and tested to Australian Standards. Other options, switched and intelligent PDUs are available on request. For a full list of power rail accessories, see page 55.
ShelvesProviding a stable platform for other miscellaneous gear, shelving mounts off the 19" rack rails. All shelves are vented toallow vertical airfl ow.
Part Number Cable Mounting Width (mm) To suit cabinet RU
ARC24U15 150 24
ARC24U30 300 24
ARC40U15 150 40
ARC40U30 300 40
ARC45U15 150 45
ARC45U30 300 45ARC45U30
Cable TraysAn effective way to keep vertical cable runs neat and tidy.
Ausrack AccessoriesA range of general accessories to suit Ausrack Plus, TxD and CQr
Data ICT 43
Product Part Number Description RU
Fan kit – 2 unit
ARPAF2 High speed, axial 1
ARPAF2T High speed, axial, with integrated thermostat 1
ARPAF2WT Whisper quiet with integrated thermostat 1
Fan kit – 4 unit*
ARPAF4 High speed, axial 1
ARPAF4T High speed, axial, with integrated thermostat 1
ARPAF4WT Whisper quiet with integrated thermostat 1
* Fitting in roof and base only
ARPAF2 ARPAF4
ARPAF2T ARPAF4T
FansTwo and four unit fan kits install into the roof or bottom plinth. The two unit fan kit can also be fi tted into the equipment rails. All fans are supplied with 2m fl ex and 10A SAA plug. Whisper quiet options are available on request.
Ausrack AccessoriesA range of general accessories to suit Ausrack Plus, TxD and CQr
General & Mounting Accessories
Part Number Product Description To suit enclosure
ARPRK Heavy duty roller kit 800kg load, adds 10mm to height of cabinet All Ausrack products
ARPFK Adjustable foot kit – All Ausrack products
ARPBK Baying kit Consists of 4 brackets All Ausrack Plus products
ARP3L 3 point locking kit Suits all door except split doors All Ausrack Plus products
ARSPL Side panel lock kit Keyed to 92208 All Ausrack Plus products
ARSPIL Side panel internal latch kit Pack of two All Ausrack Plus products
ARMS06
Mounting rail horizontal support arm
To suit 600mm deep
All Ausrack Plus productsARMS09 To suit 900mm deep
ARMS11 To suit 1100mm deep
ARMR12U
Mounting rail – pair (powdercoated)
12RU
All Ausrack Plus productsARMR24U 24RU
ARMR40U 40RU
ARMR45U 45RU
ARCN Cage nuts, screws and washers Pack of 50 All Ausrack products
ARSTUD100▲
Rack StudsPack of 100
All Ausrack productsARSTUD20▲ Pack of 20
▲ Available on request
A range of security cabinets that meet and exceed the recent SCEC guideline changes that deliver security for Australian Government Agencies.
A new standard that delivers a more secure cabinet solution for your data centre.
Security cabinet solutions
To ensure your data equipment is secure, B&R has redeveloped a range of security cabinets of the highest standard to deliver security for Australian Government agencies and private enterprises.
With this new design, B&R can now offer the widest and tallest door mesh area allowed under SCEC requirements. B&R has also developed a unique way to solve your side to side airflow requirements for switches such as the Cisco7000 series.
What this means for our customers.
You can be assured of the highest quality cabinet from material selection through to design. Australian madeand designed, B&R are in a unique position to offer thebest solution.
We have designed a range of Class C and Class B cabinets suitable for secure network applications. Purchase a fully customisable stand-alone cabinet or assemble-to-order to suit your installation requirements.
If you can’t find a solution that’s right, contact B&R Enclosures and our team of designers will work with you to engineer a fully custom product.
Contact B&R for more information on this innovative product.
Delivering the highest standard in security cabinets.
At B&R, our data centre solutions provide customers with the latest technology to enhance their product requirements and the introduction of electronic locking solutions enhances this range.
A product that enhances the control and security of access within a data centre.
Electronic locking solutions
Why purchase an electronic locking solution?
With an extensive range of compact electronic cylinders designed for doors where fitting an electronic escutcheon is not possible or required.
Totally wire-free and networked through SALTO Virtual Network and SALTO Wireless network. Available in different models, e.g. half cylinder, cam lock cylinder, padlock, and with a wide offering of different profiles, e.g., Euro profile, Australian oval, ANSI profiles.
These locks can be easily retrofit to your existing cabinets and building with no need for wiring.
Wireless real-time access control system
To further the level of security, SALTO has developed the XS4 Wireless online solution. It is designed for applications that need high level real-time access control.
SALTO Wireless can be used as an independent system or as a complement to SALTO Virtual Network (SVN) and hardwired IP solutions. It connects battery-powered electronic cylinders by means of low power radio transceivers (2.4 GHz). These interact with XS4 gateways, which are connected by Ethernet/WiFi to the central management computer. With a single click of a mouse you can configure or make changes to the network in real-time.
You can also download audit trail information for real-time con-trol, delete users remotely and securely, collect battery status for maintenance and much more, all from a single PC/table/phone and all in real-time.
Contact B&R today for a live demonstration of the Saltolock system.
48 Data ICT
With a unique understanding of the data applications, B&R manufacture and supply the highest quality 19" data cabinets providing you with the ultimate in flexibility whatever your requirements.
How are you managing your data centrecooling efficiency?
48 Data ICT
Airflow efficiency solutions
If you have already laid out your room in hot and cold aisles, with cabinets orientated ‘front to front’ and ‘back to back’, then you will achieve the best cooling by blocking unused panel spaces in your cabinets.
These open panel spaces allow cold air to flow through your cabinet to the back, reducing the cold air that goes to the equipment in the upper racks. That equipment can then run too hot, shortening its life.
What’s more, the cold air in the cabinet mixes with the hot air that returns to your air conditioners, convincing the air conditioners into thinking the temperature is lower than it actually is.
This means your air conditioners won’t work efficiently because the cooling of the hardware is reduced which creates higher temperatures and shortens the life of the equipment.
As well as cold air moving from front to back through your open panels, hot air can bypass from back to front, where it rises and delivers even warmer air to the upper computers.
This is why servers toward the tops of cabinets often have a statistically higher failure and error rate than those at the bottom. Loading cabinets from bottom to top and closing all the remaining spaces with blanking panels and baffles will make a big difference.
A unique solution for managing airflow.
50 Data ICT
Dimensions (mm)
Part Number RU Height Width
EBP1U 1 44 483
EBP2U 2 88 483
EBP3U 3 132 483
EBP4U 4 177 483
EBP5U 5 222 483
EBP6U 6 266 483EBP
Part Number Width (mm) To suit cabinets & frames
ARPBP40U100 100 40RU
ARPBP40U200 200 40RU
ARPBP45U100 100 45RU
ARPBP45U200 200 45RU
ARBPB1U
Part Number Description RU
ARBPB1U Horizontal, 19" black 1
Part Number Description RU
ARBP6U Supplied as 6 x 1RU plastic panels 1
ARBP6U
Ezibrush™ StripsKeeps hot exhaust air away from cool intake air, extending the life of your equipment. These panels have a brush strip overhanging the 1RU size by an extra 5mm allowing simple management of air gaps when placed alongside other equipment.
Eziblank Blanking PanelsThe Ausrack 6RU adjustable tool-less blanking panels simply snap to the size you need and pushes onto the 19" mounting rails. The blanking panels can be easily snapped in 1RU increments to fi t any gap. Made from UL94 fi re rated and anti-static ABS plastic.
Metal Blanking PanelsUsed to control airfl ow within the rack. They are manufactured from 1.2mm steel with a powdercoated matt black surface fi nish.
Cable Zone Blanking PlatesDesigned to seal the front section of racks bayed with cable zones from hot exhaust air at the rear of the cabinet. They extend between the posts of the two adjoining racks over the cable zone to the full height of the rack.
Airflow EfficiencyA range of products to manage airfl ow
Data ICT 51
To suit cabinets & frames
Part Number RU Width (mm)
ARPBS40U06 40 600
ARPBS40U08 40 800
ARPBS45U06 45 600
ARPBS45U08 45 800ARPBS
Airflow EfficiencyA range of products to manage airfl ow
Vertical Brush StripsDesigned to control airfl ow in the rack. They provide a barrier between the front of the frame and hot exhaust air at the rear, between the post and the side panel whilst also allowing cable access. Each strip attaches to the post and extends to the side panel of the cabinet.
▲
▲
A
Front View Side View Base View
▲ ▲500
▲ ▲B
▲
▲90
▲
▲90
▲
▲
150
▲
▲
C
Ausrack Patch19" Lab Rack
• Typically used for network patching applications.• A 2-post frame designed to provide a functional solution where
accessibility is a major requirement.• Open construction suits those who want full access to
equipment at all times.• Designed to bay together using baying kit.• Supplied flat packed and is easy-to-assemble.• Base includes fixing points for bolting to floor.• RU marked rails for easy placement of equipment.• Manufactured from 1.6mm zinc coated steel.• Powdercoated textured matte black.
Comes standard with:• RU marked frame
TECHNICAL DRAWINGS
LOAD
150kgMat
te
Bla
ck EIA-310-DCompliant
IEC 60297Compliant
For more information« brenclosures.com.au/open_rack.htm
THISPRODUCT AVAILABLE IN
NZ
Part Number
Dimensions (mm)
RUHeight
(A)Width
(B)Depth
(C) Weight (kg)
AL40U 40 1930 550 375 16.5
AL45U 45 2155 550 375 17.0
Product Part Number Description Optional End Cover AL4
0U
AL4
5U
Shelves – cantilever (black)ARC210 2RU high x 210mm deep – • •
ARC360 2RU high x 360mm deep – • •
Cable managementAL40UC
Vertical systemALC40UE •
AL45UC ALC45UE •
Cable management rings ALCMR 1RU – • •
Horizontal cable management rings ARPCMH1U 1RU – • •
Horizontal Cable Management
ARHCMF1U
Cable fingers and cover panel
– • •
ARHCMF2U – • •
ARHCMF4U – • •
Vertical Cable Management System
ARVCMS40U10U-Channel system with cable fingers, connection brackets and cover flaps
– •
ARVCMS40U20 – •
ARVCMS45U10 – •
ARVCMS45U20 – •
Power rails – horizontal(10A outlets only) SAA
ARPRH61010 6 x 10A outlets, 10A plug – • •
ARPRH61015 6 x 10A outlets, 15A plug – • •
ARPRH101010 10 x 10A outlets, 10A plug – • •
ARPRH101015 10 x 10A outlets, 15A plug – • •
Adjustable Joiner Kit ALJK Joins two frames together – • •
Cage nuts ARCN 50 pack – • •
Rack StudsARSTUD100▲ Pack of 100 – • •
ARSTUD20▲ Pack of 20 – • •
▲ Available on request
Ausrack Patch19" Lab Rack
ORDERING GUIDE
ACCESSORIES
Light duty wall mount 19" bracket. Suitable for applications where cabinet mounting is not practical and space is limited. One side is hinged to allow patch panels and equipment to be swung out for rear access.
Available in 1RU, 2RU and 4RU sizes.
To suit cabinets
Part Number RU Width (mm) Depth (mm)
ARWB1U 1 500 200
ARWB2U 2 500 200
ARWB4U 4 500 200
Product Part Number Description RUWidth(mm) To suit enclosure
Horizontal Cable Management
ARHCMF1U
Cable fingers and cover panel
1 –
All Ausrack productsARHCMF2U 2 –
ARHCMF4U 4 –
Vertical Cable Management Fingers
ARVCMF40U
Cable fingers and connection bracket
40 –All Ausrack Plus products
ARVCMF45U 45 –
ARVCMF40UR 40 –All Ausrack CQr & Ausrack TxD
ARVCMF45UR 45 –
Vertical Cable Management System
ARVCMS40U10U-Channel system with cable fingers, connection brackets and cover flaps
40 100Ausrack Plus products800mm wide cabinets or withuse of cable zones
ARVCMS40U20 40 200
ARVCMS45U10 45 100
ARVCMS45U20 45 200
Horizontal Cable Management Rings
ARPCMH1U 55mm x 30mm ring, 1RU 1 –
All Ausrack productsARPCMH2U 55mm x 30mm ring, 2RU 2 –
ARPCMH1U100 40mm x 100mm ring, 1RU 1 –
Cable Management Rings
ARPCMR2S 155mm deep, single zone – – 100mm cable zone
ARPCMR3S 300mm deep, single zone – – 100mm cable zone
ARPCMR3D 300mm deep, two zone – – 200mm cable zone
Cable Management Hanger ARPCMP24 24 patch lead hanger, 597mm – – Stand alone product wall mount
Ausrack Cable ManagementCable management systems and fi ngers
Mat
te
Bla
ck
• Designed for use in high density cabling applications.• Ausrack data cabinets are enhanced with the addition of
vertical and horizontal cable management solutions.• Products are sold as complete units.• Powdercoated textured matte black.
ORDERING GUIDE
Panels Panels
NON-MET
Fingers
For more information« brenclosures.com.au/ausrack_cable_management.htm
THISPRODUCT AVAILABLE IN
NZ
Cable Capacity
Cat5e Cat6 Cat6e Cat7 Fibre Power 10A Power 15A
Diameter (mm)# 5.6 6.3 8.4 7.6 3 7 8.5
Saturation* 50% 50% 50% 50% 60% 40% 40%
ARHCMF1U 31 25 14 17 129 16 11
ARHCMF2U 99 79 44 54 414 51 35
ARHCMF4U 227 179 101 123 947 116 79
ARPCMH1U 23 18 10 13 94 12 8
ARPCMH2U 46 36 20 26 188 24 16
ARPCMH1U100 46 36 20 26 188 24 16
ARVCMSxxU10 269 213 120 146 1125 138 94
ARVCMSxxU20 597 472 266 324 2495 306 208
ARPCMR2S 205 162 92 112 858 105 72
ARPCMR3S 431 340 192 234 1799 221 150
ARPCMR3D 1167 922 519 634 4877 598 405
Please Note: B&R Enclosures does not accept liability for any errors within the above table.# These are nominal values for the OD of cable as sizes may vary.* Recommended maximum cable saturation.
Ausrack Cable ManagementCable management systems and fi ngers
TECHNICAL INFORMATION
Before using cable management After using Ausrack Plus cable management system
Which do you prefer?
Type Part Number Description OrientationNo of
OutletsType ofOutlets
Type ofInput Plug RU
CircuitBreaker
Standard
ARPRH61010 6 x 10A Outlet 10A Plug
Horizontal
6 SAA Outlet 10A SAA plug 1 10A
ARPRH61015 6 x 10A Outlet 15A Plug 6 SAA Outlet 15A SAA plug 1 15A
ARPRH101010 10 x 10A Outlet 10A Plug 10 SAA Outlet 10A SAA plug 2 10A
ARPRH101015 10 x 10A Outlet 15A Plug 10 SAA Outlet 15A SAA plug 2 15A
ARPRV61010 6 x 10A Outlet 10A Plug
Vertical
6 SAA Outlet 10A SAA plug 10 10A
ARPRV61015 6 x 10A Outlet 15A Plug 6 SAA Outlet 15A SAA plug 10 15A
ARPRV101010 10 x 10A Outlet 10A Plug 10 SAA Outlet 10A SAA plug 16 10A
ARPRV101015 10 x 10A Outlet 15A Plug 10 SAA Outlet 15A SAA plug 16 15A
ARPRV201010 20 x 10A Outlet 10A Plug 20 SAA Outlet 10A SAA plug 28 10A
ARPRV201015 20 x 10A Outlet 15A Plug 20 SAA Outlet 15A SAA plug 28 15A
ARPRV10C13C14 10 x 10A C13, 10A C14 Plug 10 IEC320-C13 IEC320-C14 10 10A
ARPRV10C13C20 10 x 10A C13, 16A C20 Plug 10 IEC320-C13 IEC320-C20 10 16A
Surge Protection
ARPRHS61010 6 x 10A Outlet, 10A PlugHorizontal
6 SAA Outlet 10A SAA plug 1 10A
ARPRHS61015 6 x 10A Outlet, 15A Plug 6 SAA Outlet 15A SAA plug 1 15A
ARPRVS101015 10 x 10A Outlet 15A Plug Vertical 10 SAA Outlet 15A SAA plug 17 15A
Ausrack Power RailsPower distribution products
• Suitable for distribution of 10A and 15A circuits to a number of 10A SAA outlets or IEC outlets inside an enclosure.
• Horizontal and vertical power rails used for power distribution inside cabinets and enclosures.
• Also available with surge protection options.• Suitable for use in all Ausrack cabinets.• Custom power rails are available on request.
Comes standard with:• Power rail• 2m lead• Mounting brackets• All fixing hardware
ORDERING GUIDE
Tested to
AustralianStandards
SAA
Approved
Customised power rail solutionsIf you have a requirement outside of our standard offer please contact your local B&R sales offi ce and we can assist in providing a customised solution. No matter the socket type, plug type, colour or protection level, B&R can service your needs suitable for your specifi c application. At B&R we are proud to offer Australian Made custom PDUs to suit your detailed requirements.
Mat
te
Bla
ck
For more information« brenclosures.com.au/ausrack_power_rail.htm
THISPRODUCT AVAILABLE IN
NZ
Data ICT 57
Captive Plug RingFor 10A or 15A single phase plugs
• Easy split mechanism to allow the retro-fit of the plug ring without cutting the lead.
• Will suit most 10A or 15A single phase moulded SAA plugs.• Will screw onto typical IP66 sockets similar to the 56 series.• Clear design makes it easier to view if plug is in good condition.• Sold in carton quantities of 10.• Manufactured from polycarbonate
ORDERING GUIDE
NON-MET
Part Number Finish Sold as Carton Qty
BRSPR1 Transparent Single Plug 10
For more information« brenclosures.com.au/captive-plug-ring.htm
With a unique understanding of the data applications, B&R manufacture and supply the highest quality 19" data cabinets providing you with the ultimate in flexibility, whatever your requirements.
The ultimate solution is power distribution units that power data centre infrastructure.
Intelligent power distribution
In a world of big things, the little things in life are often overlooked. We are busy searching for the big idea, looking at the big picture, or chasing that big adventure. Especially in technology, business is driven by big data, powered by even bigger data centres.
But what about the little things? Where would the big wheel be without the small cog that keeps it turning?
It can be hard to see how the small things matter – until it all goes wrong. In the complex world of the data centre, the little things are critical. Variations in temperature, improperly connected cables, the accidental overloading of branch circuits. With the potential for so many things to go wrong at rack level, it can start to feel as though the little things begin to snowball out of control.
What you need are eyes and ears in every part of the data centre - or even better, a brain that can actively monitor and measure these individual events and give advanced warning before the problems escalate to failure.
The rack PDU (Power Distribution Unit) is a small, but vital part of the data centre energy supply chain – the IT gear can’t function without it. You’ll find one in every IT rack, usually two. But of seemingly small significance, the additional cost of a PDU is often overlooked amongst the bigger purchasing decision of IT and facilities.
“Let’s just get the PDU that comes with it”……..and you’re left with a vanilla PDU that simply distributes power.
B&R's intelligent range of energy PDUs work like a brain within the rack, providing comprehensive,accurate energy measurement data needed to reduce waste, enhance operations, and prove the business case for optimisation.
The energy metering PDU is far more than a simple power distribution and energy meter; actively monitoring the data centre environment, the intelligent PDU sits within the rack continually looking for threats from electrical circuit overloads, and any physical and environmental conditions which might place critical IT computing loads at risk. Combine a B&R data cabinet with an intelligent power distribution unit and you have a smart rack capable of providing the information you require.
B&R can pre-configure your smart rack by wiring sensors and pre-installing accessories as required. This can save you a great deal of time and we can package it together so you only need one part number.
Bringing you the ultimate power distribution solution.
Data cages provide a method of segregating customer racks and equipment into defined zones, providing a high level of security for equipment in a facility that contains multiple users.
With the ever increasing need to provide a secure method of housing equipment within a co-location data centre environment, B&R Enclosures can manufacture, supply and install data cages designed with the customer in mind.
Manufactured from 1.6mm thick zinc coated steel with powdercoated textured matt black surface finish, standard sized components are offered to achieve cage heights of 2400mm or 2700mm. Other standard inclusions consist of a sliding or hinged door fitted with a customer supplied locking mechanism. B&R's data cages can be tailored to suit the requirements of any data centre and are fixed top and bottom using a variety of fixings from TEK screws to explosive fasteners to limit dust.
B&R Enclosures continually invest in innovative technologies and the development of their staff, with a team of data champions able to provide onsite consultancy, design and installation of the required cages. B&R will work with the customer to ensure a data cage is specified to maintain the high level of security needed within this environment.
Features
• 1.6mm thick zinc coated steel panels• 50 x 50mm RHS supports• Aluminium door section for weight saving• Large open mesh pattern to maximise airflow and visibility• Sliding or hinged doors• Customer supplied locking mechanism• On-site consultation and installation
Our data cages provide enhanced security for data centre environments and are designed with the customer in mind.
Data cage solutions
Cold aisle containment is a method of increasing cooling efficiency, reducing power consumption and is intended to prevent air temperature zones from being mixed together in a data centre.
Cold air is fed through a false floor into a contained cold aisle. This air flows through the front of the server racks, removes the heat from installed equipment and is expelled as hot air through the rear of the cabinet. The hot air is then removed by the data centre air conditioning system.
Having the cold aisle contained means the area requiring cooling is much smaller and therefore less power is required by the C.R.A.C unit to keep it at the recommended temperature.
Cold aisle containment ensures businesses do not have to increase the cooling capacity within the data centre whilst increasing cooling efficiency and reducing costs.
Increase your cooling efficiency whilst reducing power consumption.
Cold Aisle containment solutionsThe main benefits of cold aisle containment are:
• Avoids hot air short circuits• Reduces the volume of air that needs to be cooled• Improves efficiency of the cooling system considerably• Energy cost savings
Installing a cold aisle in a workplace improves the working environment for staff, as the room does not need to be kept at a low ambient temperature. Even the cold aisle can often be warmer than that of an uncontained data centre. An uncontained data centre needs to have its air conditioning set for the installation that requires the most cooling, whereever that is within the data centre.
B&R Enclosures' cold aisle containment systems are quoted on a project basis after an on-site consultation with one of our experienced sales engineers.
62 Data ICT
Front View
▲
▲
A
▲
▲
F
▲ ▲▲ ▲B C ▲ ▲G
Side View Front View(Door Removed)
Internal Side View Bottom View
▲
▲
▲
▲
D
J
▲ ▲E
316
Ausrack IP19" racking cabinets for harsh environments
RA
L703
2
Sta
inle
ss s
teel
N
4
• 19" cabinet system designed to protect sensitive equipmentfrom harsh environments.
• Suitable for protecting equipment from dust and water.• Designed to accommodate small to medium passive patching networks.• Easy cabling via gland plate.• Front or rear depth adjustable 19" rack rails.• Manufactured from 1.6mm zinc coated steel or 1.5mm 316 stainless steel.
Comes standard with:• Front and rear adjustable 19" rack rails• Gland plate (fitted internally or externally)• 7mm square turnbuckle lock (on units <1600mm high)• Lockable L handles (1600mm high & above)• 3-point locking• Removable back• Door rails• Earth strap kit
IP66
TECHNICAL DRAWINGS
For more information« brenclosures.com.au/ip_rated_rack.htm
THISPRODUCT AVAILABLE IN
NZ
▲
▲
▲ H73
Data ICT 63
Dimensions (mm)
External Internal Opening Size Gland Opening
Product Part Number RUHeight
(A)Width
(B)Depth
(C)Usable Depth
(D)Depth
(E)Height
(F)Width
(G)Height
(H)Width
(J) Weight (kg)
Zinc coated steel
ARIP11U64 11 600 600 400 360 380 540 540 170 490 33.0
ARIP15U64 15 800 600 400 360 380 740 540 170 490 39.9
ARIP15U65 15 800 600 500 460 480 740 540 170 490 44.9
ARIP15U66 15 800 600 600 560 580 740 540 170 490 50.0
ARIP24U64 24 1200 600 400 360 380 1140 540 170 490 56.0
ARIP24U65 24 1200 600 500 460 480 1140 540 170 490 62.0
ARIP24U66 24 1200 600 600 560 580 1140 540 170 490 74.0
ARIP32U66 32 1600 600 600 560 580 1540 540 170 490 84.0
ARIP38U65 38 1800 600 500 460 480 1740 540 170 490 94.5
ARIP42U65 42 2000 600 500 460 480 1940 540 170 490 95.5
ARIP42U66 42 2000 600 600 560 580 1940 540 170 490 112.0
316 Stainless Steel
ARIP11U64/S 11 600 600 400 360 380 540 540 170 490 33.0
ARIP15U64/S 15 800 600 400 360 380 740 540 170 490 35.0
ARIP15U65/S 15 800 600 500 460 480 740 540 170 490 42.0
ARIP15U66/S 15 800 600 600 560 580 740 540 170 490 47.0
ARIP24U64/S 24 1200 600 400 360 380 1140 540 170 490 53.0
ARIP24U65/S 24 1200 600 500 460 480 1140 540 170 490 57.5
ARIP24U66/S 24 1200 600 600 560 580 1140 540 170 490 70.0
ARIP32U66/S 32 1600 600 600 560 580 1540 540 170 490 79.0
ARIP38U65/S 38 1800 600 500 460 480 1740 540 170 490 88.5
ARIP42U65/S 42 2000 600 500 460 480 1940 540 170 490 89.5
ARIP42U66/S 42 2000 600 600 560 580 1940 540 170 490 106.0
ACCESSORIES QUICK SELECTION
Accessories Page No.
Rainhoods 64
External Vent Kits 64
Vent Hoods 64
Galvanised Channel Iron Plinths 64
Shelves 65
Horizontal Cable Management 65
Horizontal Power Rails 65
Fan Kits 65
Filters 66
Blanking Panels 66
Mounting Rails 66
Door Stay 66
Swing Frames 67
19" Mounting Rail 67
Plan Holder 67
Cage Nuts 68
Wall Mounting Brackets 68
Light Kit 68
Rack Studs 68
Locks 69
Ausrack IP19" racking cabinets for harsh environments
ORDERING GUIDE
64 Data ICT
RainhoodsDesigned to shed water from the top of the enclosure and to prevent water from pooling on the enclosure top. They include an overhang of 14mm.
Part Number Material
Dimensions (mm)
AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
Height Width Depth
IPRH214
Powdercoated steel
30 600 414 • • •
IPRH215 30 600 514 • • • •
IPRH216 30 600 614 • • • •
IPRH214/S
316 stainless steel
30 600 414 • • •
IPRH215/S 30 600 514 • • • •
IPRH216/S 30 600 614 • • • •
External Vent KitsEnsures the enclosure does not become excessively hot by allowing natural circulation of air. The vent kit includes a gasket, insert filter and fittings. Please note that by the nature of this item, the enclosure will not be rated to IP66.
Part Number Material
Dimensions (mm) To suit cut-out (mm)
AR
IP11
U64
AR
IP11
U64
/SA
RIP
15U
64A
RIP
15U
64/S
AR
IP15
U65
AR
IP15
U65
/SA
RIP
15U
66A
RIP
15U
66/S
AR
IP24
U64
AR
IP24
U64
/SA
RIP
24U
65A
RIP
24U
65/S
AR
IP24
U66
AR
IP24
U66
/SA
RIP
32U
66A
RIP
32U
66/S
AR
IP38
U65
AR
IP38
U65
/SA
RIP
42U
65A
RIP
42U
65/S
AR
IP42
U66
AR
IP42
U66
/S
Height Width Depth Height Width
IPVK Powdercoated steel – 130 130 80 80 • • • • • • • • • • •
IPVK/S 316 stainless steel – 130 130 80 80 • • • • • • • • • • •
Vent HoodsDesigned to suit B&R's range of fans and filters and ensure that the fan is protected mechanically and to further protect from water and dust ingress.
Part Number Material AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
IPVH12
Powdercoated steel
• • • • • • • • • • •
IPVH25 • • • • • • • • • • •
IPVH35 • • • • • • • •
IPVH12/S
316 stainless steel
• • • • • • • • • • •
IPVH25/S • • • • • • • • • • •
IPVH35/S • • • • • • • •
Part Number
Dimensions (mm)
AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
Height Width Depth
IPPC214 75 600 371 • • • • • •
IPPC215 75 600 471 • • • • • • • •
IPPC216 75 600 571 • • • • • • • •
Galvanised Channel Iron PlinthsDesigned for use when mounting enclosures on the floor.
IPPC
IPVH (powdercoated)
IPVH (stainless steel)
Ausrack IPAccessories to suit Ausrack IP enclosures
Data ICT 65
Product Part Number
Dimensions (mm)
AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
Width Depth
Fixed ARPFL600 450 450 • • • • • • • •
Cantilever (10kg) ARC350 450 360 • • • • • • • • • • • • • • • • • • • • • •
ShelvesDesigned for mounting fixed equipment. Available in various options to suit your requirements.
Part Number AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
RU
ARPCMH1U 1 • • • • • • • • • • • • • • • • • • • • • •
Horizontal Cable ManagementA cable management solution for use in high density cabling applications.
Part Number Outlet Input plug AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
ARPRH61010 6 x 10A 10A SAA • • • • • • • • • • • • • • • • • • • • • •
ARPRH61015 6 x 10A 15A SAA • • • • • • • • • • • • • • • • • • • • • •
ARPRH101010 10 x 10A 10A SAA • • • • • • • • • • • • • • • • • • • • • •
ARPRH101015 10 x 10A 15A SAA • • • • • • • • • • • • • • • • • • • • • •
Horizontal Power RailsA range of power rails for use inside cabinets for power distribution mounted horizontally. Available in 6-way and 10-way, 10Amp SAA outlets.
Fan KitsCan be installed into the roof or externally on the enclosure to provide added ventilation. Please note that by the nature of external fan kits, the enclosure will not be rated to IP66 if fitted.
Product Description Part Number AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
Internal2-unit ARPAF2 • • • • • • • • • • • • • • • • • • • • • •
Thermostat controlled ARPAF2T • • • • • • • • • • • • • • • • • • • • • •
External
55m3/h TX-FAN12BN0A • • • • • • • • • • • • • • • • • • • • • •
110m3/hr TX-FAN23BN0A • • • • • • • • • • • • • • • • • • • • • •
230m3/h TX-FAN25BN0A • • • • • • • • • • • • • • • • • • • • • •
550m3/h TX-FAN35BN0A • • • • • • • • • • • • • • • •
ARPAF2T
ARPRH61010
ARPCMH1U
TX-FAN12
AR350CS
Ausrack IPAccessories to suit Ausrack IP enclosures
66 Data ICT
Filters – IP44Range of filters mounted to the outside of the enclosure and can be used in conjunction with any fans.
Part Number
Dimensions (mm)A
RIP
11U
64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
Height Width Depth
TX-FIL12XN0A 150 150 25 • • • • • • • • • • • • • • • • • • • • • •
TX-FIL25XN0A 250 250 31 • • • • • • • • • • • • • • • • • • • • • •
TX-FIL35XN0A 325 325 33 • • • • • • • • • • • • • • • •
Blanking PanelsUsed to control airflow within the enclosure. They are manufactured from 1.2mm steel with a powdercoated matt black surface finish.
Part Number AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
RU
EPB1U 1 • • • • • • • • • • • • • • • • • • • • • •
EPB2U 2 • • • • • • • • • • • • • • • • • • • • • •
EPB3U 3 • • • • • • • • • • • • • • • • • • • • • •
EPB4U 4 • • • • • • • • • • • • • • • • • • • • • •
EPB5U 5 • • • • • • • • • • • • • • • • • • • • • •
EPB6U 6 • • • • • • • • • • • • • • • • • • • • • •
Product Part NumberWidth (mm) IP
2121
4IP
2121
4/S
IP21
294
IP21
294/
SIP
2921
4IP
2921
4/S
IP29
215
IP29
215/
SIP
2921
6IP
2921
6/S
IP29
294
IP29
294/
SIP
4521
4IP
4521
4/S
IP45
215
IP45
215/
SIP
4521
6IP
4521
6/S
IP45
294
IP45
294/
SIP
4529
5IP
4529
5/S
IP61
216
IP61
216/
SIP
6921
5IP
6921
5/S
IP69
295
IP69
295/
SIP
7721
5IP
7721
5/S
IP77
216
IP77
216/
SIP
7729
5IP
7729
5/S
IP77
296
IP77
296/
S
Light-dutyIPLRF06 600 • • • • • • • • • • • • • • • • • • • • • •
IPLRF08 800 • • • • • • • • • • • • • •
Heavy-dutyIPHRF06 600 • • • • • • • • • • • • • • • • • • • • • •
IPHRF08 800 • • • • • • • • • • • • • •
Mounting RailsTo suit IP swing frames. These mount top and bottom off the horizontal C rail. One kit needed per swing frame.
IPLRF
IPHRF
Ausrack IPAccessories to suit Ausrack IP enclosures
Door StayEnsures the door remains open even in windy weather, for the safety of people working on the installed equipment.
Part Number AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
IPDS • • • • • • • • • • • • • • • • • • • • • •
IPDS
Data ICT 67
Product Part Number RU IP21
214
IP21
214/
SIP
2129
4IP
2129
4/S
IP29
214
IP29
214/
SIP
2921
5IP
2921
5/S
IP29
216
IP29
216/
SIP
2929
4IP
2929
4/S
IP45
214
IP45
214/
SIP
4521
5IP
4521
5/S
IP45
216
IP45
216/
SIP
4529
4IP
4529
4/S
IP45
295
IP45
295/
SIP
6121
6IP
6121
6/S
IP69
215
IP69
215/
SIP
6929
5IP
6929
5/S
IP77
215
IP77
215/
SIP
7721
6IP
7721
6/S
IP77
295
IP77
295/
SIP
7729
6IP
7729
6/S
Light-duty
LQSF03RU▲ 3 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
LQSF06RU▲ 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
LQSF09RU▲ 9 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
LQSF12RU▲ 12 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
LQSF15RU▲ 15 • • • • • • • • • • • • • • • • • • • • • • • •
LQSF18RU▲ 18 • • • • • • • • • • • • • • • • • • • • • • • •
Heavy-duty
LQSF22RU▲ 22 • • • • • • • • • • • • • • • • • • • • • • • •
LQSF27RU▲ 27 • • • • • • • • • • • • • •
LQSF31RU▲ 31 • • • • • • • • • • • • • •
LQSF36RU▲ 36 • • • • • • • • • • • •
LQSF40RU▲ 40 • • • • • • • •
▲ Available on request
Swing FramesUsed to install 19" rack mounted equipment and provides access without having to remove the rear panel.
Light-duty
Heavy-duty
Ausrack IPAccessories to suit Ausrack IP enclosures
IPRU
19" Mounting RailsSuitable for the installation of 19 inch mounted equipment
Part Number Height (mm) IP21
214
IP21
214/
SIP
2129
4IP
2129
4/S
IP29
214
IP29
214/
SIP
2921
5IP
2921
5/S
IP29
216
IP29
216/
SIP
2929
4IP
2929
4/S
IP45
214
IP45
214/
SIP
4521
5IP
4521
5/S
IP45
216
IP45
216/
SIP
4529
4IP
4529
4/S
IP45
295
IP45
295/
SIP
6121
6IP
6121
6/S
IP69
215
IP69
215/
SIP
6929
5IP
6929
5/S
IP77
215
IP77
215/
SIP
7721
6IP
7721
6/S
IP77
295
IP77
295/
SIP
7729
6IP
7729
6/S
UV19* 1946 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
IPRU11 536 • •
IPRU15 758 • • • • • •
IPRU24 1158 • • • • • •
IPRU32 1469 • •
IPRU38 1736 • •
IPRU42 1958 • • • •
IPRU11/800 536 • •
IPRU15/800 758 • •
IPRU24/800 1158 • • • •
IPRU32/800 1469
IPRU38/800 1736 • •
IPRU42/800 1958 • • • •
* Cut to size
Plan HolderDesigned to hold a standard A4 document to ensure that it is kept clean and conveniently placed. Typically this would hold detailed procedures, diagrams and more.
Part Number Description AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
IPPLN A4, plastic • • • • • • • • • • • • • • • • • • • • • • IPPLN
68 Data ICT
Wall Mounting BracketsFor ease of installation and fixing to the mounting surface, mounting brackets ensure optimum installation and safety.Supplied in a set of 4.
Part Number Product AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
IPWM Zinc coated steel • • • • • • • • • • • • • • • • • • • • • •
IPWM/S 316 stainless steel • • • • • • • • • • • • • • • • • • • • • •
IPWM/A Aluminium (RAL7035) • • • • • • • • • • • • • • • • • • • • • •
Light KitFor safety and to ensure easy installation and maintenance of equipment. The light kit comes complete with on-off switch, rail and fittings required for installation.
Part Number Description To suit width (mm) AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
IPLTK06 Complete kit 600 • • • • • • • • • • • • • • • • • • • • • •
BRLED500 LED 12V light, 500mm – • • • • • • • • • • • • • • • • • • • • • •
IPLKB06* Mounting kit 600 • • • • • • • • • • • • • • • • • • • • • •
* IPLKB06 required to mount BRLED product.
Cage NutsAn optional accessory available in a pack of 50.
Part Number Description AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
ARCN Pack of 50 • • • • • • • • • • • • • • • • • • • • • • Cage Nuts
Rack StudsIndependently tested to over 156kgs/343lbs of shear strength, rack studs are a suitable replacement for the cage nut. Rackstuds are made from a metal replacement engineered plastic.
Part Number Description AR
IP11
U64
AR
IP11
U64
/S
AR
IP15
U64
AR
IP15
U64
/S
AR
IP15
U65
AR
IP15
U65
/S
AR
IP15
U66
AR
IP15
U66
/S
AR
IP24
U64
AR
IP24
U64
/S
AR
IP24
U65
AR
IP24
U65
/S
AR
IP24
U66
AR
IP24
U66
/S
AR
IP32
U66
AR
IP32
U66
/S
AR
IP38
U65
AR
IP38
U65
/S
AR
IP42
U65
AR
IP42
U65
/S
AR
IP42
U66
AR
IP42
U66
/S
ARSTUD100▲ Pack of 100 • • • • • • • • • • • • • • • • • • • • • •
ARSTUD20▲ Pack of 20 • • • • • • • • • • • • • • • • • • • • • •
▲ Available on request
Rack Studs
Ausrack IPAccessories to suit Ausrack IP enclosures
Data ICT 69
Standard Locks
Enclosure Height (mm)
<1600 IP020 – chromed steel with 7mm square steel insert
Black powdercoated lock with 7mm square stainless steel insert
1600+ IP050 – lockable L handle keyed to 92268 IP050 – lockable L handle keyed to 92268
Lock OptionsThere are a number of lock options available that are suitable for use on all Ausrack IP enclosures. Contact your local sales representative to discuss your requirements.
Keys
Product Description Part Number Standard Lock/InsertAlternative
insertLockable handles
Plastic, 3-way
Aluminium, 3-way
Turnbucklechromed steel IP020 7mm square – steel See below – SKU SKZ
stainless steel IP020/S 7mm square – stainless steel See below – SKU SKZ
Wing knoblockable IP030 Key code 92268 – SK3 – –
non-lockable IP111 – – – – –
T handle lockable IP040 Key code 92268 – SK3 – –
L handlelockable IP050 Key code 92268 – SK3 – –
padlockable IP052 – – – – –
Swing handle, padlockablechrome IP060 – – – – –
stainless steel IP060/S – – – – –
Lock Inserts for IP20 LocksThe IP20 locks are available with an option lock insert for use on all Ausrack IP enclosures. Contact your local sales engineer to discuss your requirements.
3mm double bit pin 8mm square 8mm triangle
To suit lock style Description To suit lock Standard Insert Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel
Turnbuckle
chromed steel IP0207mm square –steel
LKINS3P – LKINS8S – LKINS8T –
stainless steel IP020/S7mm square –stainless steel
– LKINS3P/S – LKINS8S/S – LKINS8T/S
Key required – aluminium SKZ SKZ SKZ SK8 SK8 SKZ SKZ
Key required – plastic SKU SKU SKU – – SKU SKU
Ausrack IPAccessories to suit Ausrack IP enclosures
Front View
▲
▲
D
▲
▲
▲▲
EB
▲
▲
A
Side View
▲
▲
▲
▲
GC
▲
▲
F
▲
▲ 100
Cable Entry
▲ ▲430
▲
▲
430
Bottom View
▲
▲
▲▲
440550
▲
▲
▲
▲
320
620
▲
▲
480
▲ ▲39620ø13.5ø
▲▲ 460
▲
▲
250
13.5ø
316
Field FCIndustrial Field Enclosures
T33
Sta
inle
ss s
teel
N
4
• Suitable for housing ITS equipment, GPS receivers / transmitters, road monitoring / traffic management in infrastructure applications.
• Designed to protect electronic equipment in outdoor and isolated locations.• Has been specifically designed to minimise vandalism.• Flush front and rear doors with concealed hinges.• Sunshield to minimise the effects of solar radiation.• Manufactured from 2mm zinc coated steel, 316 stainless steel. Aluminium
available on request.• Powdercoated textured gloss Smoke Blue T33.
Comes standard with:• Enclosure frame• Front and rear door• Rainhood / solar shield• 3mm aluminium gland plates• 100mm high plinth – stainless• Eye bolts• Vertical mounting posts
TECHNICAL DRAWINGS
IP66
For more information« brenclosures.com.au/field.htm
THISPRODUCT AVAILABLE IN
NZ
Dimensions (mm)
Part Number External Front Opening Side Opening
Zinc coated steel 316 stainless steelHeight
(A)Width
(B)Depth
(C)Height
(D)Width
(E)Height
(F)Width
(G)
FC130706 FC130706/S▲ 1375 755 620 1085 640 1095 440
FC160706 FC160706/S▲ 1675 755 620 1385 640 1395 440
FC190706 FC190706/S▲ 1975 755 620 1685 640 1695 440
FC220706 FC220706/S▲ 2275 755 620 1985 640 1995 440
▲ Available on Request
Select your enclosure mode size from the selection guide.
The table above is categorised by depth (with the subsequent heights and widths shown in the dimension table. The table is incremented from smallest to largest height.
STEP 1
(page 71)
Select your cladding requirements from the table listed in the size selection chart (the relevant part numbers are listed for each size enclosure).
Please note that side cladding is required to achieve IP66.
STEP 2
(page 72)
Select other additional components from the range listed in the selected enclosure column in the size selection chart.
STEP 3
If additional information is required see catalogue pages or contact your local B&R sales representative to discuss your requirements.
STEP 4
Field FCIndustrial Field Enclosures
ORDERING GUIDE
Accessories Page No.
Cladding 72
Ventilated shelves 72
Baying Kit 72
Rails & Brackets 73
General Accessories 73
ACCESSORIES QUICK SELECTION GUIDE
To suit enclosure (mm)
Part Number* Description Material Height Width
FCCP1306▲
Flush with no ventilation
Zinc coated steel
1375 620
FCCP1606▲ 1675 620
FCCP1906▲ 1975 620
FCCP2206▲ 2275 620
FCCP1306/S▲
316 stainless steel
1375 620
FCCP1606/S▲ 1675 620
FCCP1906/S▲ 1975 620
FCCP2206/S▲ 2275 620
FCCP1306V▲
Vented with vent hood
Zinc coated steel
1375 620
FCCP1606V▲ 1675 620
FCCP1906V▲ 1975 620
FCCP2206V▲ 2275 620
FCCP1306V/S▲
316 stainless steel
1375 620
FCCP1606V/S▲ 1675 620
FCCP1906V/S▲ 1975 620
FCCP2206V/S▲ 2275 620
* Includes one side only▲ Available on request
Side cladding
Dimensions (mm)
Product Part Number Description RU Height Width
StandardFCSF06/19* 19 inch, rated to 50kg 1 440 480
FCSF06/21*▲ 21 inch, rated to 50kg 1 490 480
Heavy dutyFCSH06/19* 19 inch, rated to 100kg 1 440 480
FCSH06/21*▲ 21 inch, rated to 100kg 1 490 480
TelescopicFCST06/19* 19 inch, rated to 20kg 1 440 480
FCST06/21*▲ 21 inch, rated to 20kg 1 490 480
Battery tray FCBT▲ – 1 410 480
* Rack rail required▲ Available on request
Ventilated ShelvesDesigned for mounting fixed equipment. Available in various options to suit requirements. Rack rails are required for the standard, heavy-duty and telescopic shelves (purchased separately).
Baying KitAre a method of joining 19" cabinets together. Side cladding must be removed before baying cabinets together.
To suit enclosures
Part Number Material Height (mm) Width (mm)
FCBK1306▲
Zinc coated steel
1375 620
FCBK1606▲ 1675 620
FCBK1906▲ 1975 620
FCBK2206▲ 2275 620
FCBK1306/S▲
316 stainless steel
1375 620
FCBK1606/S▲ 1675 620
FCBK1906/S▲ 1975 620
FCBK2206/S▲ 2275 620
▲ Available on request
Flush with no ventilation Vented with vent hoods
FCSF –Standard shelf FCST – Telescopic shelf
Field FCAccessories to suit Field Enclosures
72 Data ICT
Rails and Brackets
General Accessories
Product Part Number Description Height (mm) To suit enclosure height (mm)
19" & 21" rail (set of 4)
FCRU24 24RU 1081 1375
FCRU31 31RU 1381 1675
FCRU38 38RU 1681 1975
FCRU45 45RU 1981 2275
Vertical power rail ARPRV61010 6-way, 10Amp – –
Product Part Number Description RU
15-way backmount frame FCCD15/19 19 inch 3
19-pole load centre FCLC19/19 19 inch 5
Light kit FCLK Complete with 8W switch 1
Door limit switch (alarm) FCDS 10A, 250V AC 1
Additional switch FCSW*▲ 10A, 250V AC –
Thermostat FCTHERM 10ºC to +60ºC –
Gland Plate FCGA0706▲ 3mm aluminium –
Plan holder FCPLN07▲ A3 –
* Light kit required▲Available on request
FCRU– 19" / 21" rail
ARPRV61010 – Vertical power rail
FCCD – Backmount frame FCGA0706 – 3mm aluminiumgland plate
FCLC – Light kit complete with switchFCTHERM – Thermostat FCPLN07 – Plan holder A3
Field FCAccessories to suit Field Enclosures
Data ICT 73
iLINQ Stand-AlonePre-assembled bayable enclosures
• Suitable for industrial automation, industrial control, plant construction, data and networking infrastructure and telecommunications applications.
• Comes pre-assembled and can be quickly and easily bayed together.• Manufactured from:
Frame – 1.5mm galvanised steelPanels – 1.6mm zinc coated steel
• Powdercoated Light Grey RAL7035.
Comes standard with:• Frame• Rear cladding (screw fixed)• Flat top with four eye bolts• Solid door• Keylockable swing handle (92268)• Mounting pan – 3mm galvanised steel• Fixed gland plate – 1.6mm galvanised steel
RA
L703
5 AS4991
Compliant
IP55
LIFT
1.5t
PAN
500kg
iLINQ Design ApproachEfficient Design
Based on 25mm increments, the iLINQ frame maximises usable space.
Advantages include:• Ability to position mounting pans on all
axes.• Ability to intersect matrix rails on the
same plane.
Modular Design
The frame rail is fundamental to iLINQ’s fl exibility, quality and strength. The rail is galvanised, pre-punched, roll-formed, ultrasonically welded and re-galvanised.ILINQ frame is designed to an IEC grid:• Profi les have attachment cavities at 12.5
increments.• Attachment cavities for M5 taptite at
25mm increments.• M6 and M8 cage nut fi xing locations at
25mm increments.
Flexible Design
The hinging design of iLINQ allows for a 170° door opening. Due to the symmetrical iLINQ design, any combination of doors, hinged cladding can be fitted to any side.
The time taken to rotate doors is:• Single door/swing handle = 3 minutes• Double door/swing handle = 5 minutes.
Symmetrical Design
The corner tripod provides the core strength and balanced framework of the iLINQ system. Perfectly symmetrical, the diecast tripod is mechanically fastened to the profi le rail to provide unrivalled strength.
iLINQ offers a patented diecast tripod design. This corner design offers superior strength as it is mechanically fastened and secured.
iLINQ doors come standard with B&R's patented swing handle design.
iLINQ doors and hinging are designed to maximise space and usability. When bayed doors still offer a 135º swing.
For more information« brenclosures.com.au/ilinq-standalone.htm
THISPRODUCT AVAILABLE IN
NZ
iLINQ Stand-AlonePre-assembled bayable enclosures
400MM DEEP
Single Door Double Door
Width (mm) 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high
400
500
600
800
1000
1200
500MM DEEP
Single Door Double Door
Width (mm) 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high
400
500
600
800
1000
1200
600MM DEEP
Single Door Double Door
Width (mm) 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high
400
500
600
800
1000
1200
800MM DEEP
Single Door Double Door
Width (mm) 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high 1400mm high 1600mm high 1800mm high 2000mm high 2200mm high
400
500
600
800
1000
1200
AVAILABLE SIZES
iLINQ Assembled-to-OrderBayable enclosures
• Suitable for industrial automation, industrial control, plant construction, data and networking infrastructure and telecommunications applications.
• Comes pre-assembled and can be quickly and easily bayed together.• Manufactured from:
Frame – 1.5mm galvanised steelPanels – 1.6mm zinc coated steel
• Powdercoated Light Grey RAL7035.
Comes standard with:• Frame• Rear cladding (screw fixed)• Flat top with four eye bolts• Solid door• Keylockable swing handle (92268)• Mounting pan – 3mm galvanised steel• Fixed gland plate – 1.6mm galvanised steel
RA
L703
5 AS4991
Compliant
IP55
LQTVVented Top
LQTFFlat Top
LQVSVertical segregation panels
LQFFrame
LQMPMounting Pan
LQLKLight Kit
LQSF/LQSC/LQSS/LQSF-SMLSwing Frame (Swing Frame Trims not shown)
LQD/LQDDDoor
(Single door option shown)
LQHEHinged Escutcheon
(LQRV & LQRH – escutcheon rails are not shown)
LQPBPlinth Base
LQPKPlinth Kit
LQCF/CPCladding Fixed/Hinged
LQGP/GP-AGland Plate
Gland Plate Adjustable (Item not shown)
LQPHPortrait Plan Holder
LQRM/RD/RPInternal Rail System
LQLLLaptop Lectern
LQRR19” Rack Rails(800mm shown)
For more information« brenclosures.com.au/ilinq-to-order.htm
THISPRODUCT AVAILABLE IN
NZ
iLINQ Assembled-to-OrderBayable enclosures
GENERAL ACCESSORIES
Cladding Panels Top CoversFlat or Vented
Plinth Base Plinth Kit Plinth Cladding
Gland Plate Kit
Gland Frame and Plates
Adjustable Gland Plate
Mounting Pan Swing Frame Swing Frame Small
Doors
Swing Frame Trim
Matrix Rails Internal Rail System Profi le &
Door Rails
Hinged Internal Door
Vertical Segregation
Panels
Plan Holders Laptop Lectern Light Kit19" Rack Rails
Baying Kit Lock assembly 7mm square
Swing handle padlockable
Swing handle keylockable
Lock insert 3mm double bit
Lock insert 8mm triangle
7mm square lock insert
Key die cast 4-way(7mm square, 8mmtriangle, 3mm double-bit, 8mm triangle)
Door Stay Flat Washers Front access cage nut Rear access cage nutButton head hex driveset screw
Gland plate clamp NutStar Washers
ASSEMBLED-TO-ORDER COMPONENTS
Our Ausrack Plus 19" cabinets havebeen designed to comply with industry SSI specifications.
The SSI specification is an expansion of the EIA-310-D standard set by the Electronic Industries Association. It is a voluntary specification signed by all major server manufacturers, some of which include Dell®, HP® and IBM®. It defines rack dimensions to which a company can manufacture their equipment. The table and diagram on page 105 outlines the compliance specification in detail and outlines a representation of B&R's Ausrack Plus product offer.
19" Rack Specification
A rack’s mounting fixture consists of two parallel metal strips (referred to as "rails") standing vertically. The rails are separated by a gap of 450 mm (17.72 inch) and are a minimum of 16.7 mm (0.657 inch) wide, giving an overall rack width of 482.6 mm or 19", as the name suggests.
The rails have holes at regular intervals, with both rails matching, so that each hole is part of a horizontal pair with a centre to centre distance of 465mm (18.3 inch). The holes are arranged vertically in repeating sets of three, with centre to centre separations of 12.7 mm (0.5 inch), 15.875 mm (0.625 inch) and 15.875 mm. The hole pattern repeats every 44.45 mm (1.75 inches).
Racks are divided into regions that are 44.45 mm in height. Within this region, commonly referred to as an “RU” or “U”, there are three complete hole pairs in a vertically symmetrical pattern that are centred 6.4mm (0.25 inches), 22.2mm (0.875 inches) and 38.1mm (1.5inches) from the top or bottom of the RU.
Dimension specifications for 19" cabinets.
G
15.875
15.875
12.7
▲
▲
▲
▲▲
▲
C
D
E▲
▲
▲▲▲
▲
▲▲
▲
▲
6.4
6.4
22.2
38.1
44.4
5
F
Front View
▲
▲
B
▲▲ A
Base View
Detail Description Specification (mm) Ausrack+ Server
A EIA Keep Out Dimension 16.7 18.5
B EIA Keep Out Dimension 50 >50
C Front Cabinet Aperture 450 452
D Hole-to-hole Spacing 465 +/- 1.6 465.8
E Panel/ Bezel Aperture 483.4 493.5
F RU Dimension 44.45 44.45
G Mounting Hole Dimension 9.5 +/- 1.0 9.5
– Rail Thickness 1.9 2.0
Ausrack Plus figures shown are typical
For further information on the SSI specifications visit www.eia.org
ABOUT YourDC
YourDC is a state of the art data centre provider based in Adelaide, South Australia. Offering Tier 3 hosting options, they provide traditional data centre space on a per-rack / per-room basis for clients after an additional aspect of security.
YourDC have data centres on the north and south sides of Adelaide, the newest being their 800 rack facility in Edinburgh Parks.
Edinburgh Parks is currently the only Tier 3 facility in Adelaide, offering data centre security within a secure location. The cold aisle containment used in its data rooms provides an environmentally friendly and economic way to maintain a consistent temperature amongst the server racks.
B&R Enclosures have worked extensively with YourDC on past projects, supplying server racks for their Data Centre in Hawthorn, SA.
B&R were approached by YourDC to supply specialised data cabinets with superior airflow containment for their $30m Edinburgh Parks site. The design needed to be modular so that the pods could be replicated across multiple rooms. YourDC were after a complete solution, from design to manufacture and installation within a specified timeframe.
B&R worked closely with YourDC to create a custom solution to meet their needs. Keeping YourDC's security and individualisation requirements in mind, B&R designed cabinets with privacy segregation panels and fully automated sensor doors at each end of the row. Partnered with the privacy panels, the mesh doors offer effective airflow, working with the cold aisle system to provide economic airflow containment.
B&R supplied Australian Made premium Ausrack Plus cabinets to fill the modular pods requested by YourDC. One pod contains 20 cabinets, each 45RU in height, bayed together with privacy panels. B&R also supplied clear roof panelling for cold aisle containment and fully automated sliding doors.
Using privacy panels between each cabinet prevents cross cabinet airflow, ensuring that all heat generated by the servers can flow directly out of the system without contaminating the cool air running through less active server bays.
Project ProfileYourDC
80 Data ICT
B&R Enclosures' expertise and knowledge in installing cold aisle containment systems means that the job was done quickly and efficiently.
YourDC has made this first installation their display room, with the aim to fill their other server rooms with pods and servers with more personalised features, including power rails and cable management where desired.
For more information« brenclosures.com.au/project/yourdc-data-centre/
Data ICT 81
Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number
A100 12, 13 AF40U609 28, 29 AF48U811 30, 31 ARDA45U06 33
A20 12, 13 AF40U610 28, 29 AF48U812 30, 31 ARDA45U08 33
A250 12, 13 AF40U611 28, 29 AL40U 52, 53 ARDA47U06 33
A500 12, 13 AF40U612 28, 29 AL40UC 53 ARDA47U08 33
AC40U06 36 AF40U806 30, 31 AL45U 52, 53 ARDA48U06 33
AC40U09 36 AF40U808 30, 31 AL45UC 53 ARDA48U08 33
AC40U11 36 AF40U809 30, 31 ALC40UE 53 ARDD18U06 32
AC40U206 36 AF40U810 30, 31 ALC45UE 53 ARDD18U08 32
AC40U209 36 AF40U811 30, 31 ALCMR 53 ARDD24U06 32
AC40U211 36 AF40U812 30, 31 ALJK 53 ARDD24U08 32
AC45U06 36 AF42U606 28, 29 AN24U606 26, 27 ARDD27U06 32
AC45U09 36 AF42U608 28, 29 AN24U609 26, 27 ARDD27U08 32
AC45U11 36 AF42U609 28, 29 AN40U606 26, 27 ARDD40U06 32
AC45U12 36 AF42U610 28, 29 AN40U609 26, 27 ARDD40U08 32
AC45U206 36 AF42U611 28, 29 AN40U809 26, 27 ARDD42U06 32
AC45U209 36 AF42U612 28, 29 AN45U606 26, 27 ARDD42U08 32
AC45U211 36 AF42U806 30, 31 AN45U609 26, 27 ARDD45U06 32
AC45U212 36 AF42U808 30, 31 AN45U809 26, 27 ARDD45U08 32
AF18U606 28, 29 AF42U809 30, 31 ARAV18U06 33 ARDD47U06 32
AF18U608 28, 29 AF42U810 30, 31 ARAV18U08 33 ARDD47U08 32
AF18U609 28, 29 AF42U811 30, 31 ARAV24U06 33 ARDD48U06 32
AF18U610 28, 29 AF42U812 30, 31 ARAV24U08 33 ARDD48U08 32
AF18U611 28, 29 AF45U606 28, 29 ARAV27U06 33 ARDM18U06 32
AF18U612 28, 29 AF45U608 28, 29 ARAV27U08 33 ARDM18U08 32
AF18U806 30, 31 AF45U609 28, 29 ARAV40U06 33 ARDM24U06 32
AF18U808 30, 31 AF45U610 28, 29 ARAV40U08 33 ARDM24U08 32
AF18U809 30, 31 AF45U611 28, 29 ARAV42U06 33 ARDM27U06 32
AF18U810 30, 31 AF45U612 28, 29 ARAV42U08 33 ARDM27U08 32
AF18U811 30, 31 AF45U806 30, 31 ARAV45U06 33 ARDM40U06 32
AF18U812 30, 31 AF45U808 30, 31 ARAV45U08 33 ARDM40U08 32
AF24U606 28, 29 AF45U809 30, 31 ARAV47U06 33 ARDM42U06 32
AF24U608 28, 29 AF45U810 30, 31 ARAV47U08 33 ARDM42U08 32
AF24U609 28, 29 AF45U811 30, 31 ARAV48U06 33 ARDM45U06 32
AF24U610 28, 29 AF45U812 30, 31 ARAV48U08 33 ARDM45U08 32
AF24U611 28, 29 AF47U606 28, 29 ARBP6U 17, 21, 50 ARDM47U06 32
AF24U612 28, 29 AF47U608 28, 29 ARBPB1U 50 ARDM47U08 32
AF24U806 30, 31 AF47U609 28, 29 ARC210 42, 53 ARDM48U06 32
AF24U808 30, 31 AF47U610 28, 29 ARC24U15 42 ARDM48U08 32
AF24U809 30, 31 AF47U611 28, 29 ARC24U30 42 ARDS18U06 34
AF24U810 30, 31 AF47U612 28, 29 ARC350 65 ARDS18U08 34
AF24U811 30, 31 AF47U806 30, 31 ARC360 42, 53 ARDS24U06 34
AF24U812 30, 31 AF47U808 30, 31 ARC40U15 42 ARDS24U08 34
AF27U606 28, 29 AF47U809 30, 31 ARC40U30 42 ARDS27U06 34
AF27U608 28, 29 AF47U810 30, 31 ARC45U15 42 ARDS27U08 34
AF27U609 28, 29 AF47U811 30, 31 ARC45U30 42 ARDS40U06 34
AF27U610 28, 29 AF47U812 30, 31 ARCN 15, 17, 19, 21, 43, 53, 68 ARDS40U08 34
AF27U611 28, 29 AF48U606 28, 29 ARDA18U06 33 ARDS42U06 34
AF27U612 28, 29 AF48U608 28, 29 ARDA18U08 33 ARDS42U08 34
AF27U806 30, 31 AF48U609 28, 29 ARDA24U06 33 ARDS45U06 34
AF27U808 30, 31 AF48U610 28, 29 ARDA24U08 33 ARDS45U08 34
AF27U809 30, 31 AF48U611 28, 29 ARDA27U06 33 ARDS47U06 34
AF27U810 30, 31 AF48U612 28, 29 ARDA27U08 33 ARDS47U08 34
AF27U811 30, 31 AF48U806 30, 31 ARDA40U06 33 ARDS48U06 34
AF27U812 30, 31 AF48U808 30, 31 ARDA40U08 33 ARDS48U08 34
AF40U606 28, 29 AF48U809 30, 31 ARDA42U06 33 ARDXDD42U06 19, 21
AF40U608 28, 29 AF48U810 30, 31 ARDA42U08 33 ARDXDD42U08 19, 21
Product Index
82 Data ICT
Part Number Page Number Part Number Page Number Part Number Page Number
ARDXDD47U06 19, 21 ARIP24U65 62, 63, 64, 65, 66, 67, 68, 69 ARP45U12 35
ARDXDD47U08 19, 21 ARIP24U65/S 62, 63, 64, 65, 66, 67, 68, 69 ARP47U06 35
ARDXM12U06 15 ARIP24U66 62, 63, 64, 65, 66, 67, 68, 69 ARP47U08 35
ARDXM18U06 15 ARIP24U66/S 62, 63, 64, 65, 66, 67, 68, 69 ARP47U09 35
ARDXM22U06 19 ARIP32U66 62, 63, 64, 65, 66, 67, 68, 69 ARP47U10 35
ARDXM32U06 19 ARIP32U66/S 62, 63, 64, 65, 66, 67, 68, 69 ARP47U11 35
ARDXM42U06 19, 21 ARIP38U65 62, 63, 64, 65, 66, 67, 68, 69 ARP47U12 35
ARDXM42U08 19, 21 ARIP38U65/S 62, 63, 64, 65, 66, 67, 68, 69 ARP48U06 35
ARDXM47U06 19, 21 ARIP42U65 62, 63, 64, 65, 66, 67, 68, 69 ARP48U08 35
ARDXM47U08 19, 21 ARIP42U65/S 62, 63, 64, 65, 66, 67, 68, 69 ARP48U09 35
ARFX6622U 18, 19 ARIP42U66 62, 63, 64, 65, 66, 67, 68, 69 ARP48U10 35
ARFX6632U 18, 19 ARIP42U66/S 62, 63, 64, 65, 66, 67, 68, 69 ARP48U11 35
ARFX6642U 18, 19 ARKBC 42 ARP48U12 35
ARFX6647U 18, 19 ARMR12U 43 ARPAF2 43, 65
ARFX6822U 18, 19 ARMR24U 43 ARPAF2T 43, 65
ARFX6832U 18, 19 ARMR40U 43 ARPAF2WT 43
ARFX6842U 18, 19 ARMR45U 43 ARPAF4 43
ARFX6847U 18, 19 ARMS06 43 ARPAF4T 43
ARFX6932U 18, 19 ARMS09 43 ARPAF4WT 43
ARFX6942U 18, 19 ARMS11 43 ARPBK 43
ARFX6947U 18, 19 ARP18U06 35 ARPBP40U100 50
ARFX8942U 18, 19 ARP18U08 35 ARPBP40U200 50
ARFX8947U 18, 19 ARP18U09 35 ARPBP45U100 50
ARFXBK 19 ARP18U10 35 ARPBP45U200 50
ARFXBK 21 ARP18U11 35 ARPBS40U06 50
ARFXKEYF 19 ARP18U12 35 ARPBS40U08 50
ARFXKEYR 15 ARP24U06 35 ARPBS45U06 50
ARFXKEYR 19 ARP24U08 35 ARPBS45U08 50
ARHCMF1U 17 ARP24U09 35 ARPCMH1U 15, 17, 19, 21, 53, 54, 55, 65
ARHCMF1U 19 ARP24U10 35 ARPCMP24 54, 55
ARHCMF1U 21 ARP24U11 35 ARPCMR2S 54, 55
ARHCMF1U 53 ARP24U12 35 ARPCMR3D 54, 55
ARHCMF1U 54, 55 ARP27U06 35 ARPCMR3S 54, 55
ARHCMF1U 55 ARP27U08 35 ARPFH1000 42
ARHCMF2U 17 ARP27U09 35 ARPFH1100 42
ARHCMF2U 19 ARP27U10 35 ARPFH1200 42
ARHCMF2U 21 ARP27U11 35 ARPFH600 42
ARHCMF2U 53 ARP27U12 35 ARPFH800 42
ARHCMF2U 54, 55 ARP3L 43 ARPFH900 42
ARHCMF2U 55 ARP40U06 35 ARPFK 43
ARHCMF4U 17 ARP40U08 35 ARPFL1000 42
ARHCMF4U 19 ARP40U09 35 ARPFL1100 42
ARHCMF4U 21 ARP40U10 35 ARPFL1200 42
ARHCMF4U 53 ARP40U11 35 ARPFL600 42, 65
ARHCMF4U 54, 55 ARP40U12 35 ARPFL800 42
ARHCMF4U 55 ARP42U06 35 ARPFL900 42
ARIP11U64 62, 63, 64, 65, 66, 67, 68, 69 ARP42U08 35 ARPP40U06 35
ARIP11U64/S 62, 63, 64, 65, 66, 67, 68, 69 ARP42U09 35 ARPP40U08 35
ARIP15U64 62, 63, 64, 65, 66, 67, 68, 69 ARP42U10 35 ARPP40U09 35
ARIP15U64/S 62, 63, 64, 65, 66, 67, 68, 69 ARP42U11 35 ARPP40U10 35
ARIP15U65 62, 63, 64, 65, 66, 67, 68, 69 ARP42U12 35 ARPP40U11 35
ARIP15U65/S 62, 63, 64, 65, 66, 67, 68, 69 ARP45U06 35 ARPP40U12 35
ARIP15U66 62, 63, 64, 65, 66, 67, 68, 69 ARP45U08 35 ARPP42U06 35
ARIP15U66/S 62, 63, 64, 65, 66, 67, 68, 69 ARP45U09 35 ARPP42U08 35
ARIP24U64 62, 63, 64, 65, 66, 67, 68, 69 ARP45U10 35 ARPP42U09 35
ARIP24U64/S 62, 63, 64, 65, 66, 67, 68, 69 ARP45U11 35 ARPP42U10 35
82 Data ICT
Product Index
Data ICT 83
Part Number Page Number Part Number Page Number
ARPP42U11 35 ARTF606 34
ARPP42U12 35 ARTF609 34
ARPP45U06 35 ARTF611 34
ARPP45U08 35 ARTF750 42
ARPP45U09 35 ARTF809 34
ARPP45U10 35 ARTF811 34
ARPP45U11 35 ARTF950 42
ARPP45U12 35 ARTH450 42
ARPP47U06 35 ARTH750 42
ARPP47U08 35 ARTH950 42
ARPP47U09 35 ARTR606 34
ARPP47U10 35 ARTR609 34
ARPP47U11 35 ARTR611 34
ARPP47U12 35 ARTR809 34
ARPP48U06 35 ARTR811 34
ARPP48U08 35 ARVCMF40U 54, 55
ARPP48U09 35 ARVCMF40UR 54, 55
ARPP48U10 35 ARVCMF45U 54, 55
ARPP48U11 35 ARVCMF45UR 54, 55
ARPP48U12 35 ARVCMS40U10 53, 54, 55
ARPRH101010 15, 17, 19, 21, 53, 56, 65 ARVCMS40U20 53, 54, 55
ARPRH101015 15, 17, 19, 21, 53, 56, 65 ARVCMS45U10 53, 54, 55
ARPRH61010 15, 17, 19, 21, 53, 56, 65 ARVCMS45U20 53, 54, 55
ARPRH61015 15, 17, 19, 21, 53, 56, 65 ARW12U250 16, 17
ARPRHS61010 56 ARW12U350 16, 17
ARPRHS61015 56 ARW12U450 16, 17
ARPRK 43 ARW12U600 16, 17
ARPRV101010 56 ARW150CS 17
ARPRV101015 56 ARW18U350 16, 17
ARPRV10C13C14 56 ARW18U450 16, 17
ARPRV10C13C20 56 ARW18U600 16, 17
ARPRV201010 56 ARW24U350 16, 17
ARPRV201015 56 ARW24U450 16, 17
ARPRV61010 56, 73 ARW24U600 16, 17
ARPRV61015 56 ARW250CS 17
ARPRVS101010 56 ARW250FS 17
ARSPIL 43 ARW350CS 17
ARSPL 43 ARW350FS 17
ARSS24U06 34 ARW450CS 17
ARSS24U08 34 ARW500FS 17
ARSS40U06 34 ARW6U250 16, 17
ARSS40U08 34 ARW6U350 16, 17
ARSS45U06 34 ARW6U450 16, 17
ARSS45U08 34 ARW6U600 16, 17
ARSTUD100 15, 17, 19, 21, 43, 53, 68 ARWMR12U 17
ARSTUD20 15, 17, 19, 21, 43, 53, 68 ARWMR6U 17
ARSX6842U 20, 21 ARWX12U450 14, 15
ARSX6847U 20, 21 ARWX12U450NF 14, 15
ARSX6942U 20, 21 ARWX12U600 14, 15
ARSX6947U 20, 21 ARWX18U450 14, 15
ARSX8842U 20, 21 ARWX18U600 14, 15
ARSX8847U 20, 21 ARWX2F 15
ARSX8942U 20, 21 ARWX450CS 15, 19, 21
ARSX8947U 20, 21 ARWX450FS 15
ARSXKEY 21 ARWX6U450 14, 15
ARTF450 42 ARWX6U450NF 14, 15
Product Index
84 Data ICT
PRODUCT INDEX
Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number
ARWX9U450 14, 15 FCCP2206/S 72 IPRU38 67 TX-FIL35XN0A 66
ARXFL350 19 FCCP2206V 72 IPRU38/800 67 UV19 67
ARXFL550 19 FCCP2206V/S 72 IPRU42 67
ARXFL550 21 FCDS 73 IPRU42/800 67
ARXFL710 19, 21 FCGA0706 73 IPVH12 64
ARXKBC350 19 FCLC19/19 73 IPVH12/S 64
ARXKBC550 19, 21 FCLK 73 IPVH25 64
ARXKBC710 19, 21 FCPLN07 73 IPVH25/S 64
ARXSPL 19, 21 FCRU24 73 IPVH35 64
AS24U609 24, 25 FCRU31 73 IPVH35/S 64
AS24U611 24, 25 FCRU38 73 IPVK 64
AS40U609 24, 25 FCRU45 73 IPVK/S 64
AS40U611 24, 25 FCSF06/19 72 IPWM 68
AS40U809 24, 25 FCSF06/21 72 IPWM/A 68
AS40U811 24, 25 FCSH06/19 72 IPWM/S 68
AS45U609 24, 25 FCSH06/21 72 LKINS3P 69
AS45U611 24, 25 FCST06/19 72 LKINS3P/S 69
AS45U809 24, 25 FCST06/21 72 LKINS8S 69
AS45U811 24, 25 FCSW 73 LKINS8S/S 69
ATDA45U06 40 FCTHERM 73 LKINS8T 69
ATDA45U08 40 IP020 69 LKINS8T/S 69
ATDD45U06 40 IP020/S 69 LQSF03RU 67
ATDD45U08 40 IP030 69 LQSF06RU 67
ATDM45U06 40 IP040 69 LQSF09RU 67
ATDM45U08 40 IP050 69 LQSF12RU 67
ATDS45U06 40 IP052 69 LQSF15RU 67
ATDS45U08 40 IP060 69 LQSF18RU 67
ATF45U609 38, 39 IP060/S 69 LQSF22RU 67
ATF45U610 38, 39 IP111 69 LQSF27RU 67
ATF45U612 38, 39 IPDS 66 LQSF31RU 67
ATF45U809 38, 39 IPHRF06 66 LQSF36RU 67
ATF45U810 38, 39 IPHRF08 66 LQSF40RU 67
ATF45U812 38, 39 IPLKB04 68 NBN-HDC01 10, 11
ATMR45U619 40 IPLKB06 68 NBN-HDC02 10, 11
ATMR45U621 40 IPLKB08 68 NBN-HDC10 10, 11
ATMR45U6A 40 IPLRF06 66 NBN-HDC13 10, 11
ATMR45U819 40 IPLRF08 66 NBN-HDC15 10, 11
ATMR45U821 40 IPLTK06 68 NBN-HDC17 10, 11
ATMR45U823 40 IPPC214 64 NBN-HDC20 10, 11
ATMR45U826 40 IPPC215 64 NBN-HDC23 10, 11
ATMR45U8A 40 IPPC216 64 NBN-HDC25 10, 11
ATMR45U8B 40 IPPLN 67 NBN-HDC27 10, 11
ATMR45U8C 40 IPRH214 64 NBN-HDCFK1 10
ATS45U609 38, 39 IPRH214/S 64 NBN-HDCFK2 10
ATS45U610 38, 39 IPRH215 64 SK3 69
ATS45U612 38, 39 IPRH215/S 64 SK8 69
ATS45U809 38, 39 IPRH216 64 SKU 69
ATS45U810 38, 39 IPRH216/S 64 SKZ 69
ATS45U812 38, 39 IPRU11 67 TKL/92268 12
ATSP45U09 40 IPRU11/800 67 TKL/L331 12
ATSP45U10 40 IPRU15 67 TX-FAN12BN0A 65
ATSP45U12 40 IPRU15/800 67 TX-FAN23BN0A 65
ATTC609 41 IPRU24 67 TX-FAN25BN0A 65
ATTC610 41 IPRU24/800 67 TX-FAN35BN0A 65
ATTC810 41 IPRU32 67 TX-FIL12XN0A 66
ATTC812 41 IPRU32/800 67 TX-FIL25XN0A 66
AUSTRALIASalesT: 1300 Enclosures (1300 362 567)F: 1300 796 599E: [email protected]
QUEENSLANDBrisbane Manufacturing, Sales & Warehouse51 Stradbroke StreetHeathwood QLD 4110(PO Box 1151)Browns Plains BC QLD 4118T: +61 7 3714 1111E: [email protected]
NORTH QUEENSLANDTownsville Sales & WarehouseUnit 4 / 780 Ingham Rd, Mount Louisa(PO Box 7615)Garbutt QLD 4814T: +61 7 4727 1900E: [email protected]
NEW SOUTH WALESNSW & ACT Sales & WarehouseUnit 12 / 100 Belmore Road North(PO Box 190)Riverwood NSW 2210T: +61 2 9915 9555E: [email protected]
NEWCASTLE DistributionRoss Joice Agencies Pty Ltd109-111 Broadmeadow RoadBroadmeadow NSW 2292T: +61 2 4961 4433F: +61 2 4961 2498
VICTORIAVIC & TAS Sales & Warehouse50-52 Sunmore CloseHeatherton VIC 3202T: +61 3 9552 0552E: [email protected]
TASMANIA DistributionW P Martin Pty Ltd85 Elizabeth StreetLaunceston TAS 7250T: +61 3 6331 5545F: +61 3 6331 4256
SOUTH AUSTRALIASA & NT Manufacturing, Sales & Warehouse505 Grand Junction RoadWingfi eld SA 5013T: +61 8 8417 6222E: [email protected]
NORTHERN TERRITORY DistributionJewell Distributors Pty LtdCnr Hidden Valley & Beaton RoadsBerrimah NT 0828T: +61 8 8947 0870F: +61 8 8947 0764
WESTERN AUSTRALIAWA Sales Offi ce & Warehouse6 Montgomery WayMalaga WA 6090T: +61 8 6310 4777E: [email protected]
NEW ZEALANDSalesB&R Enclosures LimitedT: 0800 Enclosures (0800 362 567)E: [email protected]
AUCKLAND DistributionMatchmasterUnit 6/103 Cryers RoadEast Tamaki Auckland NZ 2013T: +64 9 265 2097F: +64 9 265 2437E: [email protected]
CHRISTCHURCH DistributionChristchurch Sales AgentMatchmaster17 Washbournes RoadWigram Christchurch NZ 8042T: +64 3 348 0659F: +64 3 348 4043E: [email protected]
CHINA
SalesB&R Enclosures (Suzhou) Co. LtdE: [email protected]
SUZHOUSuzhou Sales Offi ce & ManufacturingBuilding 45 Chuangtou Industrial Zone, SIP,Suzhou 215122PEOPLE'S REPUBLIC OF CHINAT: +86 512 8718 2139F: +86 512 8718 2140E: [email protected]
HONG KONG DistributionGCS LimitedRoom 11, 10/FWah Lai Industrial CentreFotan, Shatin, N.T. HONG KONGT: +86 852 2152 2082F: +86 852 2152 1982E: [email protected]
SOUTH EAST ASIASalesB&R Enclosures Pty Ltd (Malaysia)No.38-1, Puchong Gateway Square,Jalan Suria Puchong 4, Pusat Perniagaan Suria Puchong47110, Puchong, Selangor, MalaysiaT: +603 8958 3923 or +603 8959 3923F: +603 8958 3223E: [email protected]
MALAYSIA DistributionMTW Controls SDN BHD42 Puchong Gateway SquareJalan Suria Puchong 447110 Puching Darul EhsanKuala Lumpur, MALAYSIAT: +60 122 776 373E: [email protected]
INDONESIA Distribution (Office)P.T Reitama EngineeringJl. Margonda Raya No. 139Depok, INDONESIA 16423T: +62 21 7783 7078 (Hunting)F: +62 21 7783 7079M: +62 81 1979 7772E: [email protected] or [email protected]
MIDDLE EASTSalesB&R GulfFactory No. 12, Modon BuildingsKing Salman Road, Industrial Area 3Dammam, KINGDOM OF SAUDI ARABIAT: +96 638 128 691 or +96 650 349 6592E: [email protected]
UAE DistributionEngineering Support Systems EstAshtel Mobile Shop Bldg, Mezzanine Floor Room M2(PO Box 33904 Defence Street)Abu Dhabi, UNITED ARAB EMIRATEST: +971 2641 1844E: [email protected]
OMAN DistributionGlobal Corp Enterprises LLCPO Box 1524Al Khuwair, OMANT: +96 8 9929 4323E: [email protected]
QATAR DistributionPetrogulf QatarWLL DohaQATART: +974 5550 4369E: [email protected]