Water Resources Management Sector Project ADB Loan No.2492-UZB, 2493-UZB (SF) Operation Flow KUBOTA Corporation 7A-7037 Main Pump & Discharge Valve M o Local Remote on/off CS Local Operation Panel × 8 COS Ready (In - Not Heav - Intake ch - Other Pu - Main Pum (Prime d Local Remote on/off CS HV Motor Feeder Panel × 8 COS on/off Main Pump CS SCADA × 8 OR AND on/off Remote Local open stop close CS Discharge Valve Actuator × 8 COS open stop close CS Discharge Valve AND AND D o OR Ready (Sequ - Not Heavy f - Intake cham - Other Pump - Discharge V - Discharge V - Vacuum Sys - Intake Gate - Main Entran (at least on Ma Dis Seq AND Heavy Fault - Electrical Fa - Pump Beari - Motor Beari - Motor Wind - Tech.Water - Intake cham same switch Individual Sequence COS AND IND SEQ SEQ IND Emrgency Stop
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Ready (Individal) - Not Heavy fault - Intake chamber WL H on - Other Pump not starting - Main Pump Full water (Prime detector on)
Local
Remote
on/off
CS
HV Motor Feeder Panel
×8
COS
on/off
Main PumpCS
SCADA
×8
OR
AND
on/off
Remote
Localopenstopclose
CS
Discharge Valve Actuator
×8
COS
openstopclose
CSDischarge Valve
AND
AND
Discharge Valve open/stop/close
OR
Ready (Sequence) - Not Heavy fault - Intake chamber WL H on - Other Pump not starting - Discharge Valve not fault - Discharge Valve full close - Vacuum System Ready - Intake Gate full open - Main Entrance Gate full open (at least one Gate)
Main Pump &Discharge ValveSequence Operation
AND
Heavy Fault (Main Pump) - Electrical Fault - Pump Bearing Tempe. HH - Motor Bearing Temp. HH - Motor Winding Temp. HH - Tech.Water Non Flow - Intake chamber WL under LL - Sucton pressure sw of - Intake Gate not full open
Note) COS : Change Over Switch, CS : Control Switch
Heavy Fault (Main Pump) - Electrical Fault - Pump Bearing Tempe. HH - Motor Bearing Temp. HH - Motor Winding Temp. HH - Tech.Water Non Flow - Intake chamber WL under LL - Sucton pressure sw of - Intake Gate not full open
Ready (Individal) - Not Heavy fault - Intake chamber WL H on - Other Pump not starting - Main Pump Full water (Prime detector on)
Discharge Valve open/stop/close
Ready (Sequence) - Not Heavy fault - Intake chamber WL H on - Other Pump not starting - Discharge Valve not fault - Discharge Valve full close - Vacuum System Ready - Intake Gate full open - Main Entrance Gate full open (at least one Gate)
Main Pump &Discharge ValveSequence Operation
Heavy Fault (Main Pump) - Electrical Fault - Pump Bearing Tempe. HH - Motor Bearing Temp. HH - Motor Winding Temp. HH - Tech.Water Non Flow - Intake chamber WL under LL - Sucton pressure sw of - Intake Gate not full open
Heavy Fault (Main Pump) - Electrical Fault - Pump Bearing Tempe. HH - Motor Bearing Temp. HH - Motor Winding Temp. HH - Tech.Water Non Flow - Intake chamber WL under LL - Sucton pressure sw of - Intake Gate not full open