******************************************* Belvedere ******************************************* ******************************************* ??? - For what brand of bowl do you need parts ??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example, "Marble Products #10" Notice to Plumbers: The OD diameter of the treads at the point that this fixture goes through the shampoo bowl is 1-1/8 inch 622c Fixture by Belvedere Can be used also to replace the #112 two handle fixture that came with Belvedere Shampoo Bowls for years prior to 1990. The # 112 fixture is discontinued but we have most parts available as seen below. Note: If you are replacing a 2-handle fixture with the 622c, then you may want to purchase the Cover Plate below to
20
Embed
bowl parts library - Home | Salon Equipment Guru · Replacement Cartridge sold below Will NOT fit older Belvedere Bowls, Please See the #622c (sold above) as a replacement fixture.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Place the Flo-Temp cover plate and gasket over the 2 left-hand holes in the bowl fixture deck.
Then attach the mounting bracket on the bottom side of the bowl with the 2 mounting screws
included.
Page 2Fixtures - Parts - Accessories to shampoo bowls
*******************************************
*******************************************
522 Fixtureby Belvedere
Deck Mount Fixture
! Chrome
! Single Handle Control
! Replacement Cartridge sold below
Will NOT fit older Belvedere Bowls, Please See the #622c (sold above) as a replacement fixture.
May Need Cover Plate for 2 of the 3 Holes in Bowl(Sold Above)
Page 3Fixtures - Parts - Accessories to shampoo bowls
622c Cartridgeby Belvedere
The only replacement part for the 622c Fixture
comes with clip as shown
*******************************************
*******************************************
528 Fixture with Spoutby Belvedere
Replaces the Discontinued #4228P Spout Fixture
Deck Mount Fixture
! Fits Belvedere Bowls.
! NEW! Deck Mount Fixture By BELVEDERE, Chrome, Single Handle Control with Diverter Spout * Fits Belvedere Bowls. * May Need Cover Plate for 2 of the 3 Holes in Bowl * Sold Separately above. * This Fixture Replaces the Discontinued 2 handle with Diverter Spout # 4228P Fixture
Page 4Fixtures - Parts - Accessories to shampoo bowls
*******************************************
by Belvedere# 403
Fits Only Belvedere Bowls
This is a one way valve that saves the integrity of the fresh water system by NOT
allowing contaminate water (water contaminated with perm solution,
neutralizer, hair color, etc.) from mixing with the fresh water system that we drink.
Material: Plastic Plumbing Code: ASSE #1001
Consult your local plumber and building codes for need of this product.
Vacuum Breaker * ONLYby Belvedere
# 403
Fits ONLY Belvedere Bowls
Includes: Vacuum Breaker only
* Material: Plastic * Plumbing Code ASSE # 1001
* Shampoo Hose is sold separately.
This is a one way valve that saves the integrity of the fresh water system by not allowing contaminate water( water contaminated with perm solution, neutralizer,hair color and etc.) from mixing with the fresh water
system that we all drink.
Consult your local plumber and building codes for need of this product.
Page 5Fixtures - Parts - Accessories to shampoo bowls
Vacuum Breaker
*******************************************
*******************************************
by Belvedere* Fits Belvedere Shampoo Bowls
* Vacuum Breaker Shampoo Hose Receiver * Has 2 - 1/2" holes to the Left of the Hose Opening to
accommodate Belvedere Vacuum Breaker's #403 or #503
* Complete with Clamp (Steel square and 4 screws) and Gasket* Chrome (Plastic)
* Dimension of Receiver 2-7/8" x 2-5/8"
LA, CA Vacuum Breaker #503Cby Belvedere
This vacuum breaker is a MUST for areas below: Oregon state, Wisconsin State, and Los Angeles County, CA
Includes: #503 Vacuum Breaker, Hose Receiver, and Hose fromFixture to Breaker
* ASSE 1014 Approved * Dimension of Receiver 2-7/8" x 2-5/8"
* Shampoo Hose is sold separately.
This is a one way valve that saves the integrity of the fresh water system by Not allowing contaminate water ( water
contaminated with perm solution, neutralizer, hair color and etc.) from mixing with the fresh water system that we all drink.
Consult your local plumber and building codes for need of this product.
* Replaces #404 Vacuum Breaker *
Page 6Fixtures - Parts - Accessories to shampoo bowls
Hose Receiver Kit for Vacuum Breaker
*******************************************
* Plain Shampoo Hose Receiver * NOT for Vacuum Breaker* Fits Belvedere Shampoo Bowls Only
* Complete with Clamp (Steel square and 4 screws) and Gasket* Chrome (Plastic)
* Dimension of Receiver 2-7/8" x 2-5/8"
Whiz Spray Hoseby Belvedere
screws on to fixture
Length: 42 inches
Page 7Fixtures - Parts - Accessories to shampoo bowls
Hose Receiver Kit * Plainby Belvedere
*******************************************
*******************************************
*******************************************
*******************************************
by BelvedereFits # 112 Fixture
package contains: 2-brass seats
*** No Longer Available ***
Gland Assembliesby Belvedere
Fits # 112 Fixture
package contains: 1-hot and 1-cold Gland Assemblies
Complete Strainer Assemblyby Belvedere
3-1/2"
The smaller 1-1/2" strainer assembly has been discontinued.
Package includes strainer cup ( 1 ) and items ( 2 ) thru ( 8 ) asshown in illustration.
Strainerby Belvedere
3-1/2"
Plastic strainer cup only
Page 8Fixtures - Parts - Accessories to shampoo bowls
Seats
*******************************************
*******************************************
Shampoo Bowl Bracketby Belvedere
Fits Belvedere Bowls (Acrylic/ABS Plastic Bowls)
Package contains: Upper Metal Bracket and Lower Metal Bracket
usually mounted with 4 wood screws (not included)
Shampoo Bowl Bracket * Fits Acrylic/ABS Bowls
Shampoo Bowl Mounting BracketFits: Marble Bowls
Triangle Shape Metal Mounting Bracket Fits: Marble Products Man made Marble Bowls
Has two taps turned out on top with holes to bolt into bottom of Shampoo Bowl
Package contains: Metal Bracket and 1-Camber Bolt
usually mounted to wall with 4 wood screws ( not included )
Fits: Marble Products Model # 100, 200, 2000, 3000W and 4000 Marble Shampoo Bowls
Marble Shampoo Bowl Mounting Bracket
Page 9Fixtures - Parts - Accessories to shampoo bowls
Mounting BracketFits most Belvedere Bowls
(#3800, 3100, 8000, 8100, 8200, 9000, & 1980W) &
Marble Products Fiber Glass Bowls #10 and #30
Bracket has 2 slots to accommodate 2-tongues on Back of Bowl that is Parallel to Wall. Tongues are 9" Center
Package contains: Metal Bracket and 1-Camber Bolt usually mounted with 4 wood screws ( not included )
Note: #3100 bowl needs shorter leveling bolt which is not included, but may be
* Fits # 700 Fixture * Crystal Clear Plastic Handles ( Hot and Cold )
* Includes Handles, Plastic Caps ( Hot and Cold ) and Screws
#550N Koken Single Lever Fixtureby Belmont
Single Lever Fixture
Fits Koken and Marble Shampoo Bowls.
Note: Fixture Opening in Bowl must be a Minimumof 1-3/4" and a Maximum of 2" to accommodate
this fixture.
Page 11Fixtures - Parts - Accessories to shampoo bowls
******************************************
******************************************
# 500 Fixture
The most advanced single control faucet made. Pull up for exact pressure desired. Dial the temperature you like, left for Hot, right for Cold. Turn water on or off without resetting. The
#500 "Dial-Flo" has only one moving part.
* Fits Marble, MPC & Koken Shampoo Bowls
Note: Fixture Opening in Bowl must be a Minimumof 1-3/4" and a Maximum of 2" to accommodate
this fixture.
Handle for Dial Flo #500 Fixture * Handle Only * Before June 2005
* Fits: Marble 500 "Dial-Flo" Single Handle Fixture made before June 2005
* Color: Crystal Clear * Shape: Round Sides with Flat on top & Flat on Bottom * Fastens on to fixture with Screw (included) under Cap
(button) * Fits Fixture made before June 2005 * Has 9 ridges where it fits onto stem
Page 12Fixtures - Parts - Accessories to shampoo bowls