Bose Wave Radio AWR1-1W Button Panel Replacement Remove the button panel of the device to replace broken buttons. Written By: Cassie Harriman Bose Wave Radio AWR1-1W Button Panel Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Bose Wave Radio AWR1-1W Button PanelReplacement
Remove the button panel of the device to replace broken buttons.
Written By: Cassie Harriman
Bose Wave Radio AWR1-1W Button Panel Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6
INTRODUCTION
Buttons can wear out over time or stop working completely. This guide will show how to remove thebutton panel on top of the device.
TOOLS:Spudger (1)
Bose Wave Radio AWR1-1W Button Panel Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6
Step 1 — Front Grill
Wedge the spudger between the top and front panel on the right side of the device.
Push down on the spudger, lifting the front panel away from the top panel until it pops out of theright side.
Repeat for the left side of the device.
Too much pressure may break the panel, but it should flex slightly before it pops out.
Step 2
Once the panel is released on the left side, wedge the spudger between the top panel and front grillof the device as shown.
Apply pressure and move the spudger upward until the front grill pops out.
Repeat for the right side of the device.
Bose Wave Radio AWR1-1W Button Panel Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6
Step 3
Lift the front grill away from thedevice.
Step 4 — Button Panel
Turn the device around.
Wedge the spudger into the larger part of the gap under the back of the device.
Bose Wave Radio AWR1-1W Button Panel Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6
Step 5
Move the spudger up until the buttonpanel is loose.
Push forward on the back of thebutton panel to disconnect the panelfrom the top of the device.
Step 6
Turn the device around.
Pull the button panel forward with one hand and push the screen assembly into the device with theother to disconnect the button panel.
Bose Wave Radio AWR1-1W Button Panel Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6
To reattach the button panel, place the panel in it's proper location. Press down and secure into place.
This document was last generated on 2017-06-29 08:59:44 AM.
Bose Wave Radio AWR1-1W Button Panel Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6
Related Documents
