FINAL RATES QUOTEDSCHEDULE OF QUANTITYNAME OF WORK :-
Construction of Residential Quarters 12 Nos. Type-C (G+2) & 32
Nos. Type-D (G+3) including water supply, Sanitary installation,
Drainage and electric work etc. for Central University of Rajasthan
at Bandar Sindri, Distt. AjmerS. No.Description of
ItemQty.RateUnitAmountSUB HEAD-I : EARTH WORK1Earth work in
excavation by mechanical means (Hydraulic excavator) / manual means
over areas (exceeding 30cm in depth. 1.5m in width as well as 10
sqm on plan) including disposal of excavated earth, lead up to 50m
and lift up to 1.5m, disposed earth to be leveled and neatly
dressed(a)All kinds of soil200cum2Earth work in excavation by
mechanical means (Hydraulic excavator) / manual means over areas
(exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan)
including disposal of excavated earth, lead upto 50 m and lift upto
1.5 m, disposed earth to be levelled and neatly dressed.(a)Ordinary
rock50cum(b)Hard rock (blasting prohibited)40cum3Earth work in
excavation by mechanical means (Hydraulic excavator) / manual means
in foundation trenches or drains (not exceeding 1.5 m in width or
10 sqm on plan) including dressing of sides and ramming of bottoms,
lift up to 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50
m.(a)All kinds of soil.705cum4Excavation work by mechanical means
(Hydraulic excavator)/manual means in foundation trenches or drains
not exceeding1.5m in width or 10 sqm on plan including dressing of
sides and ramming of bottoms, lift upto 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soils as
directed, within a lead of 50m.(a)Ordinary rock422cum(b)Hard rock
(blasting prohibited)280cum5Excavating trenches of required width
for pipes, cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth up to 1.5 m including
getting out the excavated soil, and then returning the soil as
required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and
disposing of surplus excavated soil as directed, within a lead of
50 m :(a)All kinds of soil(i)Pipes, cables etc. exceeding 80 mm
dia. but not exceeding300 mm dia.168.00metre6Filling available
excavated earth /GSB/building rubbish in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift up to 1.5 m.2273.00cum7Supplying and filling in
plinth with Local sand under floors, including watering, ramming,
consolidating and dressing complete.194.00cum8Surface dressing of
the ground including removing vegetation and in-equalities not
exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and
lift up to 1.5 m.(a)All kinds of soil.5280sqm6705.69Supplying and
stacking of earth at site including royalty and carriage up to 1 km
(earth measured in stacks will be reduced by20% for
payment.)1568.00cumSUB HEAD-II : CEMENT CONCRETE10Providing and
laying in position ready mixed plain cement concrete, with cement
content as per approved design mix and manufactured in fully
automatic batching plant and transported to site of work in transit
mixer for all leads, having continuous agitated mixer, manufactured
as per mix design of specified grade for plain cement concrete
work, including pumping of R.M.C. from transit mixer to site of
laying and curing, excluding the cost of centering, shuttering and
finishing, including cost of curing, admixtures in recommended
proportions as per IS : 9103 to accelerate/ retard setting of
concrete, improve workability without impairing strength and
durability as per direction of the Engineer - in - charge.(a)All
works upto plinth level.(i)M-10 grade plain cement concrete (cement
content considered @ 220 kg/cum ).300.00cum(Note :- Nothing extra
shall be paid for Cement content more than 220 kg/cum of concrete,
if so, as per design mix. )11Providing and laying damp-proof course
50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size).246.00sqm12Applying a
coat of residual petroleum bitumen of grade of VG-10 of approved
quality using 1.7 kg per square metre on damp proof course after
cleaning the surface with brushes and finally with a piece of cloth
lightly soaked in kerosene oil.246.00sqmSUB HEAD-III : RCC
WORK13Centering and shuttering including strutting, propping etc.
and removal of form for :(a)Foundations, footings, bases of
columns, etc. for mass concrete880.00sqm(b)Walls (any thickness)
including attached pilasters, buttresses, plinth and string courses
etc.780.00sqm(c)Suspended floors, roofs, landings, balconies and
access platform.5645.00sqm(d)Shelves (Cast in
situ)257sqm(e)Lintels, beams, plinth beams, girders, bressumers and
cantilevers5030.00sqm(f)Columns, Pillars, Piers, Abutments, Posts
and Struts5802sqm(g)Stairs, (excluding landings) except
spiral-staircases238sqm(h)Small lintels not exceeding 1.5 m clear
span, moulding as in cornices, window sills, string courses, bands,
copings, bed plates, anchor blocks and the like.642.00sqm(i)Weather
shade, Chajja's, corbels etc., including edges160sqm14Providing
precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4
graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm
dia mild steel wire, including centering and shuttering, roughening
cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3
fine sand) etc. complete, excluding plastering of the jambs, sills
and soffits.(a)50 mm thick40sqm15Providing and laying cement
concrete 1:5:10 (1 Cement : 5Coarse sand : 10 Graded brick
aggregate 40mm nominal size) up to floor five level for sunken
floors etc excluding the cost of centering and
shuttering.321.00cum16Providing and laying in position machine
batched and machine mixed design mix M-25 grade cement concrete for
reinforced cement concrete work, by using miniumum 375 Kg. of
cement per cum of concrete including pumping of concrete to site of
laying but excluding the cost of centering, shuttering, finishing
and reinforcement, including admixtures in recommended proportions
as per IS: 9103 to accelerate, retard setting of concrete, improve
workability without impairing strength and durability as per
direction of Engineer-in-charge.(Note :- Nothing extra shall be
paid for Cement content more than 375 kg/cum of concrete, if so, as
per design mix. )(a)All works up to plinth level400cum(b)All works
above plinth level up to floor V level1960cum17Steel reinforcement
for R.C.C. work including straightening, cutting, bending, placing
in position and binding all complete up to plinth
level.(a)Thermo-Mechanically Treated bars44000kg18Steel
reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete above plinth
level.(a)Thermo-Mechanically Treated bars254800kg19Supplying and
applying pre tested and approved water based concrete curing
compound to concrete/ masonry surface, all as per manufacturers
specification and direction of Engineer-in- charge.(a)Non pigmented
wet curing compound2000kg20Providing, hoisting and fixing up to
floor five level precast reinforced cement concrete work in string
courses, bands, copings, bed plates, anchor blocks, plain window
sills and the like, including the cost of required centering,
shuttering but excluding cost of reinforcement, with 1:2:4 (1
cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal
size).6.00cumSUB HEAD-IV :BRICK WORK21Brick work with common burnt
clay F.P.S. (non modular)bricks of class designation 7.5 in
foundation and plinth in:(a)Cement mortar 1:6 (1 cement : 6 coarse
sand)726cum22P/L cellular light weight concrete blocks in
superstructure of density 800-1000kg/cum and compressive strength
25kgs/cm2 manufactured using OPC cement,flyash,fine river sand and
max. moisture absorption of 12-15% and pre-formed protein based
foaming agent in super structure at all heights and levels in
cement mortar 1:6 (1 cement : 6 coarse sand) in all shape and
size.(a)Cement mortar 1:6 (1 cement : 6 coarse sand)1624cum23P/L
cellular light weight concrete blocks in partation of 100 mm of
density 800-1000kg/cum and compressive strength25kgs/cm2
manufactured using OPC cement,flyash,fine river sand and max.
moisture absorption of 12-15% and pre-formed protein based foaming
agent in super structure at all heights and levels in cement mortar
1:4 (1 cement : 4 coarse sand) in all shape and size.(a)Cement
mortar 1:4 (1 cement : 4 coarse sand)4264sqmSUB HEAD-V :STONE
WORK24Random rubble masonry with hard stone in foundation and
plinth including leveling up with cement concrete 1:6:12 (1 cement
: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up
to plinth level with :(a)Cement mortar 1:6 (1 cement : 6 coarse
sand)30cum(b)Cement mortar 1:6 (1 cement : 6 coarse sand)(Stone
received from excavation will be used free of
cost.)13.45cum4125Providing and fixing in Cement mortar 1:4 (1
cement : 4 coarse sand) double pitam (rebated) stone doors frame
with necessary holes, of approved quarry, all exposed surface will
be machine cut or fine dressed i/c holdfast etc. complete of size
125 x 65 mm,2850.00Metre26Stone work ashlar sunk or moulded or sunk
and moulded upto floor five level in cement mortar 1:6 (1 cement :
6 coarse sand) including pointing with white cement mortar 1:2 (1
white cement : 2 stone dust) with an admixture of pigment matching
the stone shade.(a)Red sand stone17cum27Stone tile work for wall
lining upto 10 m height with special adhesive over 12mm thick bed
of cement mortar 1:3 ( 1 cement: 3 coarse sand) including pointing
in white cement with an admixture of pigment to match the stone
shade.(a)8m thick (mirror polished and machine cut
edge)100SqmGranite stone of any colour and shade28Providing and
fixing stone jali 40mm thick throughout in cement mortar 1:3 (1
cement : 3 coarse sand) including pointing in white cement mortar
1:2 (1 white cement : 2 stone dust) with an admixture of pigment,
matching the stone shade, jali slab without any chamfers
etc.(a)White sand stone215SqmSUB HEAD-VSUB HEAD-VI :MARBLE AND
GRANITE WORK29Providing and fixing Lakha Red / Jet Black granite,
16mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, counters, window
sills , facias and similar locations of required size, approved
shade, colour and texture laid over 20 mm thick base cement
mortar1:4 (1 cement : 4 coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels.(a)Area of slab upto 0.50
sqm110sqm(b)Area of slab over 0.50 sqm290sqm30Extra for fixing
marble /granite stone, over and above corresponding basic item, in
facia and drops of width upto 150 mm with epoxy resin based
adhesive, including cleaning etc. complete.368.00metre31Providing
edge moulding to 16 mm thick marble stone counters, Vanities etc.,
including machine polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in Charge.(a)Granite
work110metreSUB HEAD-VISUB HEAD-VII :WOOD AND PVC WORK32Providing
and fixing ISI marked flush door shutters conforming to IS : 2202
(Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on
both faces of shutter:(a)35 mm thick including ISI marked Stainless
Steel butt hinges with necessary screws762.00sqm33Extra for
providing lipping with 2nd class teak wood battens 25 mm minimum
depth on all edges of flush door shutters (over all area of door
shutter to be measured).762.00sqm34Extra for Providing and fixing
flush doors with decorative veneering instead of non decorative ISI
marked flush door shutters conforming to IS: 2202 (Part I)(a)On one
side only762sqm35Providing and fixing Fiber Glass Reinforced
plastic (FRP) DoorFrames of cross-section 90mm x 45mm having single
rebate of32mm x 15mm to receive shutter of 30mm thickness .The
laminate shall be moulded with fire resistant grade unsaturated
polyester resin and chopped mat . Door frame laminate shall be2mm
thick and shall be filled with suitable wooden block in all the
three legs. The frame shall be covered with fiber glass from all
sides. M.S. stay shall be provided at the bottom to steady the
frame.431.00mtr.36Providing and fixing to existing door
frames.(a)30mm thick Fiberglass Reinforced Plastic (F.R.P.) flush
door shutter in different plain and wood finish made with fire
retardant grade unsaturated polyester resin, moulded to 3mm thick
FRP laminate all around, with suitable wooden blocks inside at
required places for fixing of fittings and polyurethane foam (PUF)
/ Polystyrene foam to be used as filler material throughout the
hollow panel, casted monolithically with testing parameters of
F.R.P. laminate conforming to table - 3 of IS:14856, complete as
per direction of Engineer-in-charge.149.00sqm37Providing and fixing
wire gauge shutters using Stainless steel (grade 304) wire gauze of
0.5 mm dia wire and 1.4 mm aperture on both side for doors, windows
and clerestory windows with hinges and necessary screws:(a)35 mm
thick shutters.With ISI marked stainless steel butt hinges of
required size(i)Second class teak wood.256sqm38Providing and fixing
M.S. grills of required pattern in frames of windows etc. with M.S.
flats, square or round bars etc. including priming coat with
approved steel primer all complete.(a)Fixed to openings /wooden
frames with rawl plugs screws etc9515Kg39Extra for Providing
Polyester powder coated on M.S.grills (minimum thickness of
polyester powder coating 50 micron) as per the direction of
Engineer-in-Charge (Payment shall be made as per the actual weights
of the M.S.grills9515.00Kg40Providing and fixing bright finished
stainless steel sliding door bolts, transparent or dyed with nuts
and screws etc. complete.(a)250 x 16mm460nos.41Providing and fixing
bright finished stainless steel tower bolts(barrel type) with
necessary screws etc. complete.(a)200 x 10mm455nos.(b)150 x
10mm455nos.42Providing and fixing bright finished stainless steel
handles with necessary screws etc.
complete.(a)125mm972nos.43Providing 40x5 mm flat iron hold fast 40
cm long including fixing to frame with 10 mm diameter bolts, nuts
and wooden plugs and embedding in cement concrete block
30x10x15cm1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone
aggregate20mm nominal size)150.00nos.44Providing and Fixing, uPVC
factory made, white colour casement/sliding window and door made of
extruded profiles. Profiles of frames and sash will be mitered cut
and fusion welded at all corners including drilling of holes for
fixing hardware and drainage of water etc., making arrangement for
fixing of hardware, EPDM gasket, 1.5 0.2mm thick galvanised steel
profile to be inserted in required profile, frame will be fixed to
the wall with 8 mm x 100 mm long fasteners and gap if any to be
filled with sealing compound, all complete as per direction of
Engineer-in-charge. (A dimensional tolerance of + 10% shall be
permitted in the dimension of UPVC window profile /
section)(Profiles, Glazing, hardware hinges and fitting etc. to be
as per the detail narrated below:- )(a)Window Profiles: The profile
section should be compatible for double glazing using high quality
locking mechanism as per details below(i)Casement Frame (67mm x
62mm)(With friction hinge &outward opening)(ii)Casement Window
Sash/Mullion (67mm x 75mm ) (style, rail and intermediate
section)(iii)Casement Glazing bead (35mm x 18 mm)(b )HARDWARE : (i)
stainless steel Friction hinges of size 300x19 x1.9 mm.(ii)
casement handle made of zinc alloyed (white powder coated) for uPVC
casement window with necessary screws etc. complete.(iii) Providing
and fixing zinc alloyed (white powder coated) touch lock for uPVC
sliding window with necessary screws etc. complete.(c)GLASS :
Hermetically sealed double glass insulated unit of 24mm thickness
using 6mm toughened glass on both sides and 12mm air gap with
aluminium perforated spacers, desiccants, sealant (Both primary and
secondary sealant) etc The double glazed glass shall be of high
quality and in pristine white color of code PLTT of Saint Gobin or
equivalent.865.00sqmSUB HEAD-VIII :STEEL WORKS45Structural steel
work riveted, bolted or welded in built up sections, trusses and
framed work, including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer all
complete.9412.00kg46Providing and fixing 1mm thick M.S. sheet door
with frame of40x40x6 mm angle iron and 3 mm M.S. gusset plates at
the junctions and corners, all necessary fittings complete,
including applying a priming coat of approved steel primer.Using
M.S. angels 40x40x6 mm for diagonal braces25sqm47Providing and
fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling
fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm
thick M.S. sheet with its top surface hacked for proper bonding,
top lid shall be screwed into the cast iron/ M.S. sheet box by
means of 3.3 mm dia round headed screws, one lock at the corners.
Clamp shall be made of 12 mm dia M.S. bar bent to shape as per
standard drawing.320.00nos.48Providing and fixing M.S. fan clamp
type I or II of 16 mm dia M.S. bar bent to shape with hooked ends
in R.C.C. slabs, beams during laying including painting the exposed
portion of loop, all as per standard design
complete.144.00nos.49Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer using structural steel etc.
as required.(a)In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works500.00kg50Providing and fixing
stainless steel ( Grade 304) railing as per enclosed Architectural
drawing made of Hollow tubes, channels, plates etc., including
welding, grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with necessary stainless
steel nuts and bolts complete, i/c fixing the railing with
necessary accessories & stainless steel dash fasteners ,
stainless steel bolts etc., of required size, on the top of the
floor or the side of waist slab with suitable arrangement as per
approval of Engineer-in-charge, ( for payment purpose only weight
of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.).3245.00kgSUB
HEAD-IX :FLOORING WORKS51Granite stone flooring with 16 mm thick
granite stone over 20 mm (average) thick base of cement mortar 1:4
(1 cement : 4 coarse sand) laid and jointed with white, mixed with
matching pigment i/c rubbing & mirror polishing complete.Lakha
red Granite/Z Black granite (Single piece used in staircase
trade.)340.00sqm52Cement concrete flooring 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate) finished with a floating
coat of neat cement, including cement slurry, but excluding the
cost of nosing of steps etc. complete.(a)40 mm thick with 20 mm
nominal size stone aggregate40sqm53Cement plaster skirting up to 30
cm height, with cement mortar1:3 (1cement : 3 coarse sand),
finished with a floating coat of neat cement.(a)18 mm
thick18sqm54Kota stone slab flooring over 20 mm (average) thick
base laid over and jointed with grey cement slurry mixed with
pigment to match the shade of the slab, including rubbing and
polishing complete with base of cement mortar 1 : 4 (1 cement : 4
coarse sand)(a)25 mm thick52sqm55Kota stone slabs 20 mm thick in
risers of steps, skirting, dado and pillars laid on 12 mm (average)
thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with
grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete.25.00sqm56Providing
and Laying Premium quality ceramic glazed wall tiles of size
12"x18" conforming to IS: 15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black as approved by Engineer-in-Charge, in
skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement
slurry @ 3.3kg per sqm, including pointing in white cement mixed
with pigment of matching shade complete.1484.00sqm57Tile work in
skirting, risers of steps and dado (up to 2 m height) over 12 mm
thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and
jointed with grey cement slurry @ 3.3 kg/sqm including pointing in
white cement mixed with pigment of matching shade
complete.(a)Marble tiles (polished) Raj Nagar.(i)8 mm
thick.372sqm58Marble stone flooring with 16 mm thick marble stone.
( sample of marble shall be approved by Engineer-in-charge) over 20
mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement slurry, including rubbing
and polishing complete with :(a)Agaria White2876sqm(b)UDAIPUR GREEN
MARBLE1557sqm5940mm thick rubbed stone flooring over 20 mm (average
) thick base of cement mortar 1:5 (1 cement :5coarse sand ) with
joints3mm thick, side buttered with cement mortar 1:2 (1 cement : 2
stone dust )admixed with pigment to match the shade of stone and
pointing the same mortar.(a)White sand stone.20sqm60Crazy ceramic
tile flooring, with under layer 12 mm thick cement mortar1:4 (1
cement: 4 coarse sand), with joints not exceeding 5 mm, including
filling the gaps with ordinary cement mixture & mixing with
synthetic polyester fibre, triangular in shape having specific
gravity of 1.34 to 1.40, cross section size ranging from 10 to 40
micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg
of cement in cement mortar, including providing and mixing water
proofing material in mortar @ 1 kg per 50 kg of cement , all
complete as per direction of
Engineer-in-charge.1427.00sqm61Providing and laying rectified
anti-skid Ceramic glazed floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make in colours White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1
Cement : 4Coarse sand), including grouting the joints with white
cement and matching pigment etc., complete. (The tile shall have
minimum abrasion value of grade -4).729.00sqmSUB HEAD-X :ROOFING
WORKS62Providing and laying roof insulation with 75 mm thick
impervious, sprayed, C F C free closed cell free Rigid polyurethane
foam with thermal conductivity not more than0.028W/m/K at 10 degree
C mean temperature and having additional properties of compressive
strength not less than300KPa and 7 days water absorption not more
than 0.2 kg/cum and minimum value of CFC free closed cell contents
at 92% by volume over deck insulation confirming to IS - 12432 Pt
III (density of foam being 40-45 kg/cum) over a coat of
polyurethane primer applied @ 6-8 sqm per liter, laying 400 G
polythene sheet over PUF spray and providing a wearing course of 40
mm thick cement screed 1 : 2 : 4 (1cement : 2 coarse sand: 4 stone
aggregate 20 mm nominal size) in chequered rough finish, in panels
of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing
the joints with polymerized mastic all complete as per direction of
Engineer-in-charge.1475.00sqm63Providing & fixing UV stabilised
fiberglass reinforced plastic sheet roofing up to any pitch,
including fixing with polymer coated 'J' or 'L' hooks, bolts &
nuts 8mm dia. G.I plain/bitumen washers complete but excluding the
cost of purlins, rafters, trusses etc. The sheets shall be
manufactured out of 2400 TEX panel rovigs incorporating minimum
0.3% ultra-violet stabiliser in resin system under approximately
2400 psi and hot cured. They shall be of uniform pigmentation and
thickness without air pockets and shall conform to IS 10192 and IS
12866.The sheets shall be opaque or translucent, clear or
pigmented, textured or smooth as specified.(a)2mm thick
flat50sqmSUB HEAD-XI : FINISHING646 mm cement plaster of mix
:(a)1:3 (1 cement : 3 fine sand)5252sqm6512 mm cement plaster of
mix :(a)1:4 (1cement:4 coarse sand)200sqm(b)1:6 (1 cement: 6 coarse
sand)20712sqm6620mm thick cement plaster of mix.(a)1:6 (1 cement: 6
coarse sand)400sqm67White washing with lime to give an even shade
:(a)New work (three or more coats)239sqm68Finishing walls with
water proofing cement paint of required shade :(a)New work (Two or
more coats applied @ 3.84 kg/10 sqm)600sqm69Finishing walls with
textured exterior paint of required shade :(a)New work (Two or more
coats applied @ 3.28 ltr/10 sqm) over and including priming coat of
exterior primer applied @2.20kg/10 sqm8418.00sqm70Finishing walls
with Premium Acrylic Smooth exterior paint with Silicone additives
of required shade :(a)New work (Two or more coats applied @ 1.43
ltr/ 10 sqm over and including priming coat of exterior primer
applied @ 2.20 kg/ 10 sqm)200.00sqm71French sprit polish: Two or
more coats on new works including a coats of wood
filler.1087.00sqm72melamine polishing on wood work (one or more
coats)1000sqm73Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and manufacturer, over
the plastered wall surface to prepare the surface even and smooth
complete.25964.00sqm74Wall painting with premium acrylic emulsion
paint of interior grade, having VOC (Volatile Organic Compound )
content less than 50 grams/liter of approved brand and manufacture,
including applying additional coats wherever required to achieve
even shade and colour.(a)Two coats20780sqm75Painting with synthetic
enamel paint, having VOC (Volatile Organic Compound) content less
than 150 grams/ liter, of approved brand and manufacture, including
applying additional coats wherever required to achieve even shade
and colour.(a)Two coats590sqm76Applying priming coats with primer
of approved brand and manufacture, having low VOC (Volatile Organic
Compound ) content.(a)With ready mixed pink or grey primer on wood
work (hard and soft wood) having VOC content less than 50 grams/
liter1562.00sqm(b)With ready mixed red oxide zinc chromatic on
steel / iron works having VOC content less than 250
grams/liter400.00sqm7715mm thick sand stone tile lining at all
heights and levels with special adhesive such as H-40 Eco Extra
Flex of Kerakoll or equivalent. Adhesive layer shall be minimum 5mm
thick and done through approved applicator trained by manufacturer.
Stone tile shall be fixed with adhesive over 12mm cement plaster
1:3 ( 1 cement : 3 coarse sand) and pointing with suitable material
with admixture of pigment to match the stone shade all complete as
per directions of Engineer in Charge. Size of stone shall not be
more than 1.5 sqft.a)First quality Gang saw cut white Dholpur sand
stone (natural)7418sqmb)First quality Gang saw cut white Dholpur
sand stone (honed finish)1000.00sqm78Distempering with oil bound
washable distemper of approved brand and manufacture to give an
even shade :(a)New work (two or more coats) over and including
water thinnable priming coat with cement primer600.00sqmSUB
HEAD-XII : ROAD WORK79Providing and erecting 3.00 metre high (1.2m
at Bottom with CGI sheet & top 1.8m with good quality Hessian /
Woven Plastic / Geotextile) temporary barricading at site as per
drawing/ direction of Engineer-in-Charge which includes writing and
painting, arrangement for traffic diversion such as traffic signals
during construction at site for day and night, glow lamps,
reflective signs, marking, flags, caution tape as directed by the
Engineer-in-Charge. The barricading provided shall be retained in
position at site continuously i/c shifting of barricading from one
location to another location as many times as required during the
execution of the entire work till its completion. Rate include its
maintenance for damages, painting, all incidentals, labour
materials, equipments and works required to execute the job. The
barricading shall not be removed without prior approval of
Engineer-in-Charge. (Note :- One time payment shall be made for
providing barricading from start of work till completion of work
i/c shifting. The barricading provided shall remain to be the
property of the contractor on660.00metreShifting of barricading
shall be done free of cost in accordance with the exigencies of
work if shifting is done for any other reasons, the same shall be
paid for separately.)SUB HEAD-XIII : ALUMINIUM WORK80Providing and
fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
confirming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitered and jointed mechanically wherever required
including cleat angle, Aluminium snap beading for glazing /
paneling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-charge.
(Glazing, paneling and dash fasteners to be paid for separately)
:(a)For Fixed Portion:-(i)Polyester powder coated aluminium
(minimum thickness of polyester powder coating 50
micron)4800.00kg(a)For shutters of doors, windows and ventilators
including providing and fixing hinges/pivots and making provision
for fixing of fittings wherever required including the cost of EPDM
rubber / neoprene gasket required (Fittings shall be paid for
separately)(i)Polyester Powder Coated aluminium (minimum thickness
of polyester powder coating 50 micron).6950.00kg81Providing and
fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket/with putty etc.
complete as per the architectural drawings and the directions of
engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item):(a)With float glass panes of 5.50 mm
thickness40sqm82Filling the gap in between aluminium frame &
adjacent RCC/ Brick/ Stone work by providing weather silicon
sealant over backer rod of approved quality as per architectural
drawings and direction of Engineer-in-charge complete.(a)Up to 5mm
depth and 5 mm width993metre83Providing and fixing aluminium
handles ISI marked anodised (anodic coating not less than grade AC
10 as per IS : 1868) transparent or dyed to required colour or
shade with necessary screws etc. complete :(a)100
mm500nos.84Providing and fixing aluminium tower bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS :1868
) transparent or dyed to required colour or shade with necessary
screws etc. complete :(a)150x10 mm1000nos.85Providing & fixing
fly proof wire gauze to windows, clerestory windows & doors
with nuts & bolts complete.(a)Stainless steel (grade 304) wire
gauze of 0.5 mm dia wire and1.4 mm aperture on both
sides.690.00sqmSUB HEAD-XIV : WATERPROOFING WORK86Providing and
laying water proofing treatment to vertical and horizontal surfaces
of depressed portions of W.C., kitchen and the like consisting of
:i)Ist course of applying cement slurry @ 4.4Kg/sqm mixed with
water proofing compound conforming to IS 2645 in recommended
proportions including rounding off junction of vertical and
horizontal surface.ii)IInd course of 20mm cement plaster 1:3 (1
cement : 3 coarse sand) mixed with water proofing compound in
recommended proportion including rounding off junction of vertical
and horizontal surface.iii)IIIrd course of applying blown or
residual bitumen applied hot at 1.7 Kg. per sqm of area.iv)IVth
course of 400 micron thick PVC sheet. (Overlaps at joints of PVC
sheet should be 100 mm wide and pasted to each other with bitumen @
1.7 Kg/sqm.)1172.00sqm87Providing & Applying to layers of tape-
crete over R.C.C surface as per manufacturer specification duly
approved by Engineer-In-charge.1172.00sqmSUB HEAD XV :
MISCELLANEOUS88Providing and fixing extruded polystyrene Insuboard
XPS (density not less than 36 kg/cum 2 kg/cum, compressive strength
not less than 276 kpa, water absorption not more than0.3% V/V and
thermal conductivity not more than 0.028W/mK) manufactured by M/s
Supreme Petrochem Ltd / DOW Chemicals / Isofoam or equivalent of
thickness 50mm in vertical walls / expansion joints of required
size etc. complete as per manufacture's specification as approved
by competent authority and as per direction of
Engineer-in-charge.2021.00sqm89Making plinth protection using 40mm
thick fine dressed sand stone flooring over 20 mm (average) thick
base of cement mortar 1:5 including pointing with cement mortar 1:2
(1 cement : 2 stone dust) with an admixture of matching pigment
laid over under layer of 75 mm thick 1:5:10(1 cement :5 coarse sand
:10 graded stone 40mm thick) all complete as per direction of
Engineer in charge(a)Red sand stone270Sqm90Stone chap/path edging
to plinth protection 40 to 50 mm wide30 cm deep with approximate
rectangular shape rough dressed chaps (Bijolia Sandstone) jointed
with Cement motor 1:4 (1 cement :4 fine sand) and as per the
direction of Engineer in Charge including excavation refilling and
disposed of surplus earth up to 50m lead complete.489.00MetreSUB
HEAD XVI : SANITARY INSTALLATION91Providing and fixing water closet
squatting pan (Indian type W.C. pan ) with long arm Centrifugally
cast Iron P or S trap, Dual flush low level white P.V.C. flushing
cistern with manually controlled device (handle lever) conforming
to IS : 7231 with all fittings and fixtures complete including
cutting and making good the walls and floors wherever required
:(a)White Vitreous china Orissa pattern W.C. pan of size 580x440mm
with integral type foot rests.44.00Nos.92Providing and fixing white
vitreous china pedestal type water closet (European type W.C. pan)
with seat and lid, Dual flush low level white P.V.C. flushing
cistern with manually controlled device (handle lever), conforming
to IS : 7231 with all fittings and fixturescomplete including
cutting and making good the walls and floors wherever
required:(a)W.C. pan with ISI marked white solid plastic seat cover
and lid.44Nos.93Providing and fixing C.P. jet for
European44Nos.94Providing and fixing white vitreous china (
continental sereis code no. CNS-WHT-WB 03 size 560x450x175 mm of
Jaquar make) or equivalent under counter wash basin with C.I
brackets, 32 mm dia C.P brass waste of standard pattern, including
painting , of fitting and brackets, cutting and making good the
wall where ever required.(a)Oval wash basin Size 560 x 450 x175
mm88Nos.95Providing and fixing P.V.C. waste pipe for sink or wash
basin including P.V.C. waste fittings complete.Flexible pipe(i)32
mm dia88Nos.(ii)40 mm dia44Nos.96Providing and fixing 600x450 mm
beveled edge mirror of superior glass (of approved quality)
complete with 6 mm thick hard board ground fixed to wooden cleats
with C.P. brass screws and washers complete.88.00Nos.97Providing
and fixing stainless steel A ISI 304 (18/8) Kitchen Sink as per IS
13983 with C.I. brackets and stainless steel plug 40mm including
painting of fitting and brackets, cutting and making good the walls
wherever required.(a)Kitchen sink with drain board 510 x 1040 x 178
mm depth44Nos.98Providing and fixing soil, waste, rain water and
vent pipes :(a)100 mm dia.(i)Centrifugally cast (spun) iron
socketed pipe as per IS: 3989.3320metre99Providing and fixing M.S.
holder-bat clamps of approved design to Sand Cast iron/cast iron
(spun) pipe embedded in and including cement concrete blocks
10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) including cost of cutting holes and
making good the walls etc. :(a)For 100 mm dia.
Pipe500Nos.100Providing and fixing bend of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete.(a)100 mm(i)Sand cast iron S&S as per IS -
3989152Nos.101Providing and fixing single equal plain junction of
required degree with access door, insertion rubber washer 3 mm
thick, bolts and nuts complete.(a)100x100x100mm(i)Sand cast iron
S&S as per IS - 3989100Nos.102Providing and fixing heel rest
sanitary bend(a)100 mm(i)Sand cast iron S&S as per IS -
398968Nos.103Providing and fixing double equal junction of required
degree with access door, insertion rubber washer 3 mm thick, bolts
and nuts complete :(a)100x100x100x100mm(i)Sand cast iron S&S as
per IS - 398990Nos.104Providing and fixing terminal guard:(a)100
mm(i)Sand cast iron S&S as per IS 398968Nos.105Providing and
fixing collar:(a)100 mm(i)Sand cast iron S&S as per IS
398994Nos.106Providing lead caulked joints to sand cast
iron/centrifugally cast(spun) iron pipes and fittings of
diameter:(a)100 mm1700Nos.107Providing and fixing M.S. stays and
clamps for sand cast iron/centrifugally cast (spun) iron pipes of
diameter :(a)100 mm82Nos.108Providing and fixing trap of self
cleansing design with screwed down or hinged grating with or
without vent arm complete, including cost of cutting and making
good the walls and floors :(a)100 mm inlet and 100 mm outlet(i)Sand
cast iron S&S as per IS: 3989.180Nos.109Providing and fixing
C.P brass towel ring ( kubix series code AQN-7721 of Jaquar make)
or equivalent with cocealed fitting arrangement of approved color
etc all complete144.00Nos.110Providing and fixing C.P soap Dish
Holder ( kubix series code AKB35731 of Jaquar make) or equivalent
with cocealed fitting arrangement of approved color etc all
complete192.00Nos.111Providing & Fixing chrome plated over head
shower ( Multy function shower code OHS - 1789, 120 mm dia of
jaquar make or equivalent and shower arm, code SHA 487-120mm long
of jaquar make etc. all complete88.00Nos.112Providing and fixing
low flow basin mixture ( Jaquar - FLR5167NB) or equivalent with
concealed fitting arrangement etc. all complete.88.00Nos.Sub
Head-XVII : WATER SUPPLY113Providing and fixing G.I. pipes complete
with G.I. fittings and clamps, including cutting and making good
the walls etc.Internal work Exposed on wall, Terrace etc.(a)15 mm
dia. nominal bore355metre(b)32 mm dia. nominal bore330metre(c)40 mm
dia. nominal bore430metre(d)50 mm dia. nominal
bore330metre114Providing and fixing chlorinated polyvineyl Chloride
(CPVC) pipes, having thermal stability for hot and cold water
supply including all CPVC plain & brass threaded fittings,
fixing the pipe with clamps at1.00 mm spacing. The includes
jointing of pipes & fittings with one step CPVC gidrent cement
and cost of cutting chases and making good the same including
testing of joints. ( Concealed work including cuttimg and making
good the walls etc.)(a)15 mm dia nominalouter dia
pipes750metre(b)20 mm dia nominalouter dia pipes550metre(c)25 mm
dia nominalouter dia pipes550metre(d)32 mm dia nominalouter dia
pipes730metre115Providing and fixing G.I. pipes complete with G.I.
fittings including trenching and refilling etc.External work(a)40
mm dia. nominal bore550metre(b)50 mm dia. nominal
bore550metre116Providing and fixing water saving bib cock straight
line or anguler shape ( Florentine series code FLR-5047N or FLR -
5037 respectively of jaquar make or equivalent including flange
etc, complete all respects.(a)15 mm nominal
bore.136Nos.117Providing and fixing chrome plated anglular valve
for WB & Gayser(a)15mm nominal bore352Nos.118Providing and
fixing CP brass long body bib cock of approved quality conforming
to IS standard and weighting not less than 690 gms(a)15 mm nominal
bore56Nos.119Painting G.I. pipes and fittings with synthetic enamel
white paint over a ready mixed priming coat, both of approved
quality for new work :(a)32 mm diameter pipe.350metre(b)40 mm
diameter pipe.450metre(c)50 mm diameter pipe.350metre120Providing
and filling sand of grading zone V or coarser grade allround the
G.I. pipes in external work.(a)40 mm diameter pipe.550metre(b)50 mm
diameter pipe.550metre121Providing and fixing G.I. Union in G.I.
pipe including cutting and threading the pipe and making long
screws etc. complete (New work)(a)32 mm nominal160Nos.(b)40 mm
nominal bore140Nos.(c)50mm nominal bore40Nos.122Providing and
fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :(a)25 mm nominal bore.64Nos.(b)32 mm nominal
bore.16Nos.123Providing and fixing uplasticised PVC connection pipe
with brass unions :(a)45 cm length(i)15 mm nominal
bore204Nos.124Providing and placing on terrace (at all floor
levels) polyethylene water storage tank with seven layers ISI:
12701 marked with cover and suitable locking locking arrangement
and making necessary holes for inlet, outlet and overflo pipe bent
without fittin and the base support for
tank.44000.00Litre125Providing and fixing brass / ferrule
connection with month cover including boring and taping the
main(a)20 mm nominal bore8Nos.126Constructing masonry Chamber
30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :
4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm
(inside) with hinged cover fixed in cement concrete slab 1:2:4 mix
( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size), i/c necessary excavation, foundation concrete 1:5:10 ( 1
cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size)
and inside plastering with cement mortar 1:3 (1 cement : 3 coarse
sand) 12mm thick finished with a floating coat of neat ceemnt
complete as per standard design:(a)With common burnt clay F.P.S. (
non modular) bricks of class designation 7.58.00Nos.Sub Head-XVIII
: DRAINAGE127Providing, laying and jointing glazed stoneware pipes
grade A with stiff mixture of cement mortar in the proportion of
1:1 (1 cement : 1 fine sand) including testing of joints etc.
complete :(a)100 mm diameter72metre(b)150 mm
diameter740metre128Providing and laying cement concrete 1:5:10 (1
cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal
size) all-round S.W. pipes including bed concrete as per standard
design:(a)100 mm diameter S.W. pipe72metre(b)150 mm diameter S.W.
pipe740metre129Providing and laying non-pressure NP2 class (light
duty) R.C.C. pipes with collars jointed with stiff mixture of
cement mortar in the proportion of 1:2 (1 cement : 2 fine sand)
including testing of joints etc. complete :(a)250 mm dia. R.C.C.
pipe580metre(b)300 mm dia. R.C.C. pipe478metre130Constructing brick
masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand )
R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix
(1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal
size) inside plastering 12mm thick with cement mortar 1:3 (1 cement
: 3 coarse sand) finished with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20mm nominal size) finished with a
floating coat of neat cement complete as per standard design
:(a)Inside size 90x80 cm and 45 cm deep including C.I. cover with
frame (light duty) 455x610 mm internal dimensions total weight of
cover and frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg) :(i)With Sewer bricks conforming to IS :
488536Nos.131Extra for depth for manholes(a)Size 90x80 cm(i)With
Sewer bricks conforming to IS : 48856metre132Providing and fixing
square-mouth S.W. gully trap grade 'A' complete with C.I. grating
brick masonry chamber with water tight C.I. cover with frame of 300
x300 mm size (inside) the weight of cover to be not less than 4.50
kg and frame to be not less than 2.70 kg as per standard design
:(a)150 x 100 mm size P type.(i)With sewer bricks conforming to IS
: 488522Nos.133Constructing brick masonry road gully chamber
45x45x77.5 cm with bricks of class designation 75 in cement mortar
1:4 (1 cement : 4 coarse sand ) with pre-cast R.C.C. vertical
grating complete as per standard design :(a)with common burnt clay
F.P.S. Bricks25Nos.134Constructing brick masonry road gully chamber
110x50x77.5 cm with bricks of class designation 75 in cement mortar
1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C.
horizontal grating with frame and vertical grating complete as per
standard design :(a)with common burnt clay4Nos.135Providing and
laying S & S centrifugally cost (spun) iron pipe (classLA)
conforming to I.S. 1536(a)100 mm dia pipe60MetreTotal (A) Civil
WorkESTIMATED COST AS PER NIT (CIVIL)3.65% ABOVE ON ESTIMATED
COST(B)ELECTRICAL WORKSUB-HEAD I : INTERNAL WIRING1Wiring for Light
point / Fan point / Exhaust Fan point / Call Bell point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable in
surface / recessed steel conduit, with modular switch, modular
plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc. as
required.a)Group - A1738Point2Wiring for Light point / Fan point /
Exhaust Fan point / Call Bell point with 1.5 sq.mm. FRLS PVC
insulated copper conductor single core cable in surface / recessed
steel conduit, and earthing the point with 1.5 sq.mm. FRLS PVC
insulated copper conductor single core cable etc. as required.
(Point shall be controlled / looped from existing point-Group
control point wiring).52Point3Wiring for light/power plug with 2 x
4 sq.mm FRLS PVC insulated copper conductor single core cable in
surface / recessed steel conduit alongwith 1 No. 4 sq.mm FRLS PVC
insulated copper conductor single core cable for loop earthing as
required.3420Metre4Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in recess, including
providing and fixing3 pin 5 / 6 amps modular socket outlet and 5 /
6 amps modular switch, connection, painting etc.as required. (For
light plugs to be used in non residential
buildings)560nos.5Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in recess, including
providing and fixing6 pin 15/16 & 5/6amps modular socket outlet
and 15 / 16 amps modular switch, connection, painting etc.as
required.228nos.6Wiring for circuit / submain wiring along with
earth wire with the following sizes of FRLS PVC insulated copper
conductor, single core cable in surface / recessed steel conduit as
required.a)2 X 1.5 sq. mm. + 1 X 1.5 sq. mm. Earth wire2800Metreb)2
X 2.5 sq. mm. + 1 X 2.5 sq. mm. Earth wire3750Metrec)4 X 2.5 sq.
mm. + 2 X 2.5 sq. mm. Earth wire660Metred)4 X 4 sq. mm. + 2 X 4 sq.
mm. Earth wire660Metree)2 X 6 sq. mm. + 1 X 6 sq. mm. Earth
wire1980Metref)2 X 10 sq. mm. + 1 X 10 sq. mm. Earth
wire640Metreg)4 X 10 sq. mm. + 2 X 10 sq. mm. Earth
wire280Metre7Supplying and fixing 25 Amps Power Unit surface/recess
type for Air-Conditioners, 240 Volts, Modular type, Socket outlet,
along with moror starter for protection from Overloads, GI box,
modular base & cover plate, plug top with indicator etc
complete with connections, testing and commissioning etc. as
required.132nos.8Supplying and fixing of following sizes of steel
conduit along with the accessories in surface / recess including
painting in case of surface conduit, or cutting the wall and making
good the same in case of recessed conduit as required.a)25 mm (For
TV, Telephone, Fire Alarm System, Wi-Fi system)2700Metreb)32
mm88Metre9Supplying and fixing of following sizes of medium class
PVC conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduitas required.(a)25 mm2700Metre(b)32 mm88Metre10Supplying and
fixing two module stepped type electronic fan regulator on the
existing modular plate switch box including connections but
excluding modular plate etc. as required.306nos.11Supplying and
fixing following size/ modules, GI box along with modular base
& cover plate for modular switches in recess etc as
required.(a)1 or 2 Module (75mm x 75mm ) for TV & Telephone
Socket264nos.(b)6 Module (200mm x 75mm )44nos.12Supplying and
fixing following modular switch/ socket on the existing modular
plate & switch box including connections but excluding modular
plate etc. as required.a)15/16 amps switch44nos.b)3 pin 5/6 amp
socket outlet88nos.c)Telephone socket outlet132nos.d)TV antenna
socket outlet132nos.e)Lan Cable Socket outlet for cat-6
cable44nos.13S/D of Cat-6 data cable in the exisiting surface /
recessed PVC/steel c740Metre14Supplying and drawing following pair
0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored
telephone cable in the existing surface/ recessed / PVC conduit as
required.a)2 Pair2820Metre15Supplying and drawing co-axial TV cable
RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded
with fine tinned copper braid and protected with PVC sheath in the
existing surface/ recessed steel/ PVC conduit as
required.2820Metre16Supplying and fixing Ding Dong call bell
suitable for single phase,230 volts, complete as
required.44nos.17Supply & fixing of 20 pair telephone tag
(Krone make) block with required size box with lockable
cover.2nos.18Supply & fixing of 50 pair telephone tag (Krone
make) block with required size box with lockable
cover.2nos.SUB-HEAD II : DISTRIBUTION BOARDS & PANELS1Supplying
and fixing following ways surface/ recess mounting,vertical type,
415 volts, TPN MCB distribution board of sheetsteel, dust
protected, duly powder painted, inclusive of 200 amps tinned copper
bus bar, common neutral link, earth bar, din bar for mounting
MCB's, with provision of 100 amps TP 16 KA MCCB asincomer,
interconnection between incomer MCCB and bus bars(but without
MCB's/ MCCB) as required. (Note: Vertical typeMCB TPDB is normally
used where 3 phase outlets are required)a)4 WAY (4+12), Double
Door4Nos.2Providing and fixing following rating and breaking
capacity four pole MCCB in existing cubicle panel board including
drilling holes in cubicle panel, making connections, etc. as
required.a)100 Amp, 16 KA4Nos.3Supplying and fixing following way,
single pole and neutral, sheet steel, MCB distribution board, 240
volts, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But without
MCB/RCCB/Isolator)a)8 WAY (4+8), Double Door32nos.b)12 WAY (4+12),
Double Door32nos.3Supplying and fixing following way, horizontal
type three pole and neutral, sheet steel, MCB distribution board,
415 volts, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But without MCB/
RCCB/ Isolator)a) 4 WAY (4+12), Double Door24nos.4Supplying and
fixing 5 amps to 32 amps rating, 240/415 volts, 'C' curve,
miniature circuit breaker suitable for inductive load of following
poles in the existing MCB DB complete with connections, testing and
commissioning etc. as required.a)Single pole940Nos.b)Triple
pole12Nos.5Supplying and fixing following rating, double pole, 240
volts, isolator in the existing MCB DB complete with connections,
testing and commissioning etc. as required.(a)40
amps64Nos.6Supplying and fixing following rating, four pole, 415
volts, isolator in the existing MCB DB complete with connections,
testing and commissioning etc. as required.(a)40
amps24Nos.7Supplying and fixing following rating, four pole, (three
phase and neutral), 415 volts, residual current circuit breaker
(RCCB), having a sensitivity current upto 300 milliamperes in the
existing MCB DB complete with connections, testing and
commissioning etc. as required.(a)40 amps24No.8Supplying and fixing
following rating, double pole, (single phase and neutral), 240
volts, residual current circuit breaker (RCCB), having a
sensitivity current upto 300 milliamperes in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.a)25 amps32nos.b)40 amps32nos.9Supplying, installation,
testing and commissioning of cubical tube compartmentalized meter
board made of 1.6mm thick sheet steel duly powder coated,
integrated loose wire box, complete with incomer125A, 16 KA 4Pole,
Microprocessor release, MCCB, 200Amp. insulated copper Bus Bars,
each meter compartment having 40Amp. TP MCB, space for meter,
pre-wired from Bus-bar upto connector block (for each quarter), in
loose wire box, compartment for digital ammeter, Digital voltmeter,
Selector Switch for Ammeter and voltmeter including supplying and
fixing of all material, locking/ ceiling arrangement for each. The
area of meter board shall not be less than 2.25 Sq.mtr. and fixing
of all material 300mm deep.Suitable for 8Nos, 1 Kwh
Meters12Sets10Supplying, installation, testing and commissioning of
electronic kwh meter, sleek model with current reversal indication,
LED indication proportional to kwh for on-spot calibration, dust
proof body, rugged construction, elegant poycarbonate casing, non
affected by external magnetic field energy meters, three phase
energy meter works even on neutral removing etc. complete as
required as per spesifications.a)3Phase, 4 Wire, kWh, 10 -40A
Sleek12Nos.b)1Phase, LCD Meter 5-30A with optical
port32Nos.c)1Phase, LCD Meter 10-60A with optical
port32Nos.SUB-HEAD III : LIGHTNING PROTECTION1Earthing with G.I.
earth pipe 4.5m long x 40mm dia. including accessories, and
providing masonary enclosure with cover plate having locking
arrangement and watering pipe etc. with charcoal/coke and salt
complete as required.16Sets2Providing and fixing of lightning
conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having
single prong at top, with 85 mm dia 6 mm thick G.I. base plate
including holes etc. complete as required.4Nos.3Jointing copper /
G.I. tape (with another copper/ G I tape, base of the finial or any
other metallic object) by riveting / nut bolting/ sweating and
soldering etc as required.40Nos.4Providing and fixing G.I. tape 20
mm X 3 mm thick on parapet or surface of wall for lightning
conductor complete as required.(For horizontal
run)600Metre5Providing and fixing G.I. tape 20 mm X 3 mm thick on
parapet or surface of wall for lightning conductor complete as
required.(For vertical run)220Metre6Providing and fixing testing
joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4
nos. of G.I. bolts, nuts, chuck nuts and spring washers etc.
complete as required.16Nos.7Providing and laying G.I. tape 32 mm X
6 mm from earth electrode directly in ground as
required.80MetreSUB-HEAD IV : EARTHING1Earthing with G.I. earth
pipe 4.5m long x 40mm dia. including accessories, and providing
masonary enclosure with cover plate having locking arrangement and
watering pipe etc. with charcoal/coke and salt complete as
required.24Sets2Providing and fixing 25 mm X 5 mm G.I. strip on
surface or in recess for connections etc. as
required.120Sets3Providing and fixing 25 mm X 5 mm G.I. strip in 40
mm dia G.I. pipe from earth electrode including connection with
G.I. nut, bolt, spring, washer excavation and re-filling etc. as
required.120MetreSUB-HEAD V : FANS & LIGHTING FIXTURE1Supply,
installation, testing and commissioning of pre-wired, 1x28W
fluorescent luminaire surface type with electronic (HFP) ballast,
CRCA body slim looks, including 1xTL5-28W Lamp, lockable holders
etc. complete as required, Similar to PHILIPS Cat. Ref. No. MIROLTA
Slim T5 TMS540 HF/ TRILUX Ridos 40128 ( without diffuser) GE DMS 28
DN /Blue and caps Make.100Nos.2Supply, installation, testing and
commissioning of pre-wired, 1x14W fluorescent luminaire surface
type with electronic (HFP) ballast, CRCA body slim looks,
non-corrosive, robust including 1xTL5-14W Lamp, lockable holders
etc. complete as required, Similar to PHILIPS Cat. Ref. No. ADRENO
V 14W TWG207/ TRILUX Ridos 40114 ( with diffuser) GE DMS 14 DN/
Decon Make.88Nos.3Supply, installation, testing and commissioning
of 1x20W pendent light luminaire complete with lockable holder,
lamp etc complete as required, Similar to PHILIPS Cat. Ref. No. FXC
101 1xPL-S 9W AC GR/ KBH 9W CFL/ Crompton Cat. Ref. No. QPG 302/
GE- CPL11x10 VH/ TRILUX/ Decon Make.44Nos.4Supply, installation,
testing and commissioning of 1x12W water resistant IP44 light
luminaire including 1x12W Tornado Lamp, E27 lamp Base etc complete
as required, Similar to PHILIPS Cat. Ref. No. 71165/30/ Decon/ GE
Make.12Nos.5Supply, installation, testing and commissioning of
surface mounted2xPLC 18W cylindrical Downlight, including 2xPLC 18W
Lamp, electronic gear, high efficiency glossy reflector, CRCA
Housing etc complete as required similar to PHILIPS Cat. Ref. No.
FCS 105/218HF/ TRILUX Onperla D2 HR 2TCT 18-01/ REGENT 3030 W.
P218.7/ Schreder/ Decon Make.224Nos.6Supply, installation, testing
and commissioning of water resistant IP44 rating, 1x12W CFL
luminaire surface type with ballast, glass, stee housing, including
1x12W Tornado Lamp, E27 Lamp base etc. complete as required,
Similar to PHILIPS Cat. Ref. No.32081/31/Decon/ Schreder/GE
Make.352Nos.7Supply, installation, testing and commissioning of
wall mounted,1x12W CFL luminaire with ballast, glass, stee housing,
including1x12W Tornado Lamp, E27 Lamp base etc. complete as
required, Similar to PHILIPS Cat. Ref. No. QWG 305/ Schreder/
Trilux/ decon Make.296Nos.8Supply, installation, testing and
commissioning of wall mounted,1x23W CFL luminaire with ballast,
glass, stee housing, including1x12W Essential E27 Lamp base etc.
complete as required, Similar to PHILIPS Cat. Ref. No. QWG 311/
Antracile/Trilux/ Schreder/ Decon Make.72Nos.9Supply, installation,
testing and commissioning of 1200 mm sweep,50W, 350RPM, Air
Delivery 225 CMM, Energy Saving ceiling fan complete with double
ball bearings, blades, down rod, shackle insulator, canopy etc.
complete as required, Similar to Havells Cat. Ref. No. ES 5/
Crompton Greaves/Almonard/ Marathon Electric Make.188Nos.10Supply,
installation, testing and commissioning of 900 mm sweep,50W,
350RPM, Air Delivery 225 CMM, Energy Saving ceiling fan complete
with double ball bearings, blades, down rod, shackle insulator,
canopy etc. complete as required, Similar to Havells Cat. Ref. No.
SS 290/ Crompton Greaves/Almonard/ Marathon Electric
Make.132Nos.11Supply, installation, testing and commissioning of
havy duty,230Volts, single phase, 50Hz, 300mm dia exhaust fan
double ball bearing,complete with enegy efficent motor, louvers,
bird screen and with 3 core flexible wire complete as required,
similar to Havells cat. ref. no. TURBO FORCE/ Crompton
Greaves/Almonard/ Marathon Electric Make.156Nos.ABOVE 3.65%OF
ESTIMATED COST0