Emirates Steel 1 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com Emirates Steel Pre Qualification Updated, May 2011
Emirates Steel
1 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Emirates SteelPre QualificationUpdated, May 2011
Emirates Steel
2 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Contents
1 Welcome to Emirates Steel 3
1.1 Company Objectives 3
1.2 Production Process 4
1.3 Where to find us 5
1.4 Contact us 5
2 Product Specifications 6
2.1 Qualities & Grades 6
2.2 Technical Specification 6
2.2.1 Straight Rebar 6
2.2.2 Wire Rod 8
2.2.3 Rebar in Coil 8
2.3 Chemical Composition 9
3 Quality 10
3.1 Laboratory & Inspection Facilities 10
3.2 Integrated Management System 11
3.2.1 Quality Control 11
3.2.2 Quality Assurance 11
3.2.3 Environmental Aspects 11
3.3 Awards and Merits 12
4 Certificates 13
4.1 Commercial License 13
4.2 Industrial License 14
4.3 ADCCI Membership 15
4.4 DCL-Scope of certification 16
4.5 UK certification Authority for Reinforcing Steels 17
4.6 UK certification Authority for Reinforcing Steels 18
4.7 Certificates of Production Conformity (Dubai Municipality) BS4999:1997 19
4.8 Certificates of Production Conformity (Dubai Municipality) BS4999:2005 20
4.9 ESMA certificate of conformity -BS4449:2005 & BS4449:1997 21
4.10 ESMA -License of the use of the emirates mark of Conformity 22
4.11 Management System-EN ISO 14001-2009 23
4.12 Management System-BS OHSAS 18001-2007 24
4.13 Sustainability certificate 25
5 Mill Test Reports 26
Emirates Steel
3 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Welcome to Emirates Steel
Emirates Steel is the leading steel making company in the United Arab Emirates.With its steel operations in Abu Dhabi, Emirates Steel supplies both basic and special steel mainly to the construction and infrastructure market in the UAE.
Emirates Steel was established in 2001, and is part of the Abu Dhabi Basic Industries Corporation (ADBIC), a wholly owned subsidiary of the Abu Dhabi Government’s General Holding Corporation.
Currently, Emirates Steel produces Rebar (in straight and in coil form) and Wire Rod. A new plant to produce structural sections will enter in production by end 2011.Plans exist to further expand and include Wide Plate and Hot Rolled Coil.Total steel producing capacity by end 2014 is expected to be 6.5 billion tonnes.
DRI Plant
Plant to produce direct reduced iron from iron oxide pellets based on HyL Technology.Annual capacity: 1.6 million ton
Steel Making plant
Steel Making Plant with a 150 ton Electric Arc Furnace (EAF), Laddle Furnace and 6-strand Billets Continuous Casting Machine.Annual capacity: 130 x 130 billets and 150 x 150 billets - 1.4 million ton
Rolling Mills
Three rolling mills, producing Rebar, Rebar in Coil and Wire Rod.Total annual capacity: 1.84 million ton.
Company Objectives
Vision
To be recognized as a leading supplier in the region of the highest quality products and services to our customers Contribute to the creation of employment opportunities locally and to the development of our community
Mission
To supply the construction, oil, gas and shipping sectors with their requirements of high quality steel products Adopt safe and environmentally friendly work practices across our business Engage, develop and inspire our workforce to excel
Core Values
Creativity, Innovation and High Quality Honestly and integrity across all aspects of our business Continuous improvement in all areas, with a focus on health, safety, environment and employee development and recognition
1
1.1
Emirates Steel
4 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Production Process1.2
1. Scrap2. DR Furnace3. Hot DRI Transport System4. Scrap Basket5. Cold DRI Conveyor6. Electric Air Furnace7. Ladle Furnace8. Continuous Casting9. Reheating Furnace10. Rolling Mill Stands11. Reinforced Bar12. Wire Rod
Emirates Steel
5 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Where to find us
Contact us
For sales enquiries or for discussion kindly contact:
Ms. Beverly Wania
Tel. +971 2 507 2144
Fax +971 2 551 5113
Email: [email protected]
1.4
1.3
Emirates Steel
Tel. +971 2 507 2144
Fax +971 2 551 5113
Emirates Steel
6 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Product Specifications
Qualities & Grades
Product Specification ref.
Grade Sizes (mm)
RebarBS 4449/97 460 B 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 25 / 28 / 32
BS 4449/05 B 500B 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 25 / 28 / 32
ASTM A615 Grade 60 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 25 / 28 / 32
Rebar in Coil BS 4449/97 460 B 8 / 10 / 12 / 14 / 16
BS 4449/5 B 500B 8 / 10 / 12 / 14 / 16
Plain Wire Rod AISI 1005-1038 5.5mm to 16mm
Technical Specification
Straight Rebar
Standard Bar Count
Size Kg/m 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12
D8 0.395 844 779 723 675 633 596 563 533 506 482 460 440 422
D10 0.616 540 499 463 432 405 382 360 341 324 309 295 282 270
D12 0.888 375 347 322 300 282 265 250 237 225 215 205 196 188
D14 1.208 276 255 237 221 207 195 184 174 166 158 151 144 138
D16 1.579 211 195 181 169 158 149 141 133 127 121 115 110 106
D18 1.998 167 154 143 133 125 118 111 105 100 95 91 87 84
D20 2.466 135 125 116 108 101 95 90 85 81 77 74 71 68
D22 2.984 112 103 96 89 84 79 74 71 67 64 61 58 56
D25 3.854 86 80 74 69 65 61 58 55 52 49 47 45 44
D28 4.834 68 63 59 55 51 48 46 43 41 39 38 36 34
D32 6.313 52 48 45 42 39 37 35 32 32 30 29 28 26
Other Characteristics
Bundle Weight 2.0 mt
Permitted deviations on bars per bundle
Sizes 8 / 10 / 12 -0 + 3
Sizes 14 / 16 / 18 -0 + 2
Size 20 -0 + 1
Sizes > 20 None
Bar Length Tolerance -0 to +100mm or as agreed
End Strap Placement 0.5m from each end
2
2.1
2.2
2.2.1
Emirates Steel
7 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Mechanical Properties
We produce high yield deformed steel bars for concrete reinforcement (Rebar), in sizes 8-32 mm and 12 m long.
The quenching process we use allows for superior mechanical properties to specification ASTM A615 GR 60, BS 4449/97 GR 460B and BS 4449/05 GR B500B
Rebar / ASTM A615 GR 60Elongation (%)Tensile strength (N/mm2)Yield Stress (N/mm2)
min 7-9min 621min 414As specified
min 12min 640min 500Guarantee by ES
Rebar / BS 4449/97 GR 460BElongation (%)Tensile strength (N/mm2)Yield Stress (N/mm2)
min 14 min 1.08 x Act Y.S. min 460As specified
min 16min 590 min 500Guarantee by ES
Rebar / BS 4449/05 GR B500BAgt (%)Tensile strength (N/mm2)Yield Stress (N/mm2)
min 5 min 1.08 x Act Y.S. min 500As specified
min 6min 605min 520Guarantee by ES
Emirates Steel
8 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Wire Rod
We produce Plain Wire Rod coils according to steel grades AISI 1005 to 1038
OvalitySize tolerance
0.40mm Max+/-0.25mmSizes 5.5 – 6.5mm
0.48mm Max+/-0.30mmSizes 7 – 14mm
Two heat resistant tags are attached to each coil (one at each end) with details of cast number, size, grade, specification, coil number etc.
Rebar in Coil
We produce Rebar coils according to specifications BS 4449/97, Grade 460B and BS 4449/2005, Grade B500B
OvalitySize tolerance
0.4mm Max+/-0.25mmSizes 5.5 – 6.5mm
0.48mm Max+/-0.30mmSizes 7 – 14mm
Two heat resistant tags are attached to each coil (one at each end) with details of cast number, size, grade, specification, coil number etc.
2.2.2
2.2.3
Emirates Steel
9 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Chemical Composition2.3 St
eel
Code
Pr
oduc
t D
escr
ipti
on
C%
SI%
M
n%
P%
S%
N%
Cu
%
Cr%
M
o%
Ni%
V
%
Sn%
Ce
v
M
in-M
ax
Min
-Max
M
in-M
ax
Max
M
ax
Max
M
ax
Max
M
ax
Max
M
ax
Max
M
ax
A
RM
1 r
olle
d r
ein
forc
ing b
ars
Specific
ation B
.S 4
449/9
7 G
r460B
0.1
7-0.2
4
0.1
5-0.3
0
0.7
0-0.9
0
0.0
3
0.0
3
0.0
12
0.4
0
0.3
0
0.0
5
0.4
0
0.0
4
0.0
4
0.5
1
A1
RM
1 r
olle
d r
ein
forc
ing b
ars
Specific
ation B
.S 4
449/0
5 G
rB500B
0.1
7-0.2
4
0.1
5-0.3
0
0.8
0-1.0
0
0.0
3
0.0
3
0.0
12
0.4
0
0.3
0
0.0
5
0.4
0
0.0
4
0.0
4
0.4
8
B
RM
2 r
olle
d r
ein
forc
ing b
ars
Specific
ation B
.S 4
449/9
7 G
r460B
0.1
8-0.2
4
0.1
5-0.3
0
0.6
0-0.8
0
0.0
3
0.0
3
0.0
12
0.4
0
0.3
0
0.0
5
0.4
0
0.0
4
0.0
4
0.5
1
B1
RM
2 r
olle
d r
ein
forc
ing b
ars
Specific
ation B
.S 4
449/0
5 G
rB500B
0.1
8-0.2
4
0.1
5-0.3
0
0.8
0-1.0
0
0.0
3
0.0
3
0.0
12
0.4
0
0.3
0
0.0
5
0.4
0
0.0
4
0.0
4
0.4
8
C
RM
3 r
olle
d r
ein
forc
ing b
ars
in c
oil
Specific
ation B
.S 4
449/9
7 G
r460B
0.1
8-0.2
4
0.1
5-0.3
0
0.9
0-1.0
0
0.0
3
0.0
3
0.0
12
0.4
0
0.3
0
0.0
5
0.4
0
0.0
4
0.0
4
0.5
1
C1
RM
3 r
olle
d r
ein
forc
ing b
ars
in c
oil
Specific
ation B
.S 4
449/0
5 G
rB500B
0.1
8-0.2
4
0.1
5-0.3
0
1.1
0-1.3
0
0.0
3
0.0
3
0.0
12
0.4
0
0.3
0
0.0
5
0.4
0
0.0
4
0.0
4
0.4
8
D
Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
005
0.0
6 M
ax
0.0
5-0.1
0
0.3
5 M
ax
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
D1
Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
005(B
)
0.0
6 M
ax
0.0
5-0.1
0
0.3
5 M
ax
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
Boro
n
35-50ppm
E
Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
006
0.0
6-0.0
8
0.0
6-0.1
2
0.2
5-0.4
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
F
Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
008
0.0
6-0.1
0
0.0
6-0.1
3
0.3
0-0.5
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
1
0.0
08
0.0
4
G
Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
010
0.0
8-0.1
3
0.1
0-0.2
0
0.3
0-0.6
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
2
0.0
08
0.0
4
H
Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
012
0.1
0-0.1
5
0.1
0-0.2
0
0.3
0-0.6
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
3
0.0
08
0.0
4
I Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
015
0.1
3-0.1
8
0.1
0-0.2
0
0.3
0-0.6
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
J Pla
in w
ire rod
Gra
de A
ISI/
SAE 1
018
0.1
5-0.2
0
0.1
0-0.3
0
0.6
0.0
.90
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
K
Pla
in w
ire rod
Gra
de A
ISI 1020
0.1
8-0.2
3
0.1
0-0.3
0
0.3
0-0.6
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
L
Pla
in w
ire rod
Gra
de A
ISI 1021
0.1
8-0.2
3
0.1
0-0.3
0
0.6
0-0.9
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
M
Pla
in w
ire rod
Gra
de A
ISI 1030
0.2
8-0.3
4
0.1
0-0.3
0
0.0
-0.9
06
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
N
Pla
in w
ire rod
Gra
de A
ISI 1038
0.3
5-0.4
2
0.1
0-0.2
0
0.6
0-0.9
0
0.0
4
0.0
5
0.0
08
0.1
5
0.1
0
0.0
2
0.1
0
0.0
08
0.0
4
Emirates Steel
10 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Quality
Laboratory & Inspection Facilities
1
3
3.1
Emirates Steel
11 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Integrated Management System
Quality Control
To ensure our product quality, Emirates Steel has:
A quality inspection plan to control incoming material, products in process and final products Laboratory equipped with the latest testing instruments such as spectrometer, tensile and bend testing machines and rib area measurement device
To ensure the accuracy of testing and measuring instrument, Emirates Steel applies a calibration plan for all instruments that may affect the quality of our product. Inspection and testing are conducted as per International Standards.
Quality Assurance
Emirates Steel operates a comprehensive Integrated Management System (IMS) with strong com-mitment to Quality, Environment, Health & Safety and sustainability based on the requirements of ISO 9001, ISO 14001, OHSAS 18001, UK CARES, Dubai Central Laboratory, Emirates Authority for Standardization and Metrology (ESMA), Regulatory Authority and excellence award.
A detailed QEHS (Quality, Environment, Health and Safety) policy is deployed throughout the or-ganization to ensure consistent product compliance to international standards, as well as to meet customer requirements.
We are committed to our Integrated Management System through:
Identification and evaluation of environment aspects / hazards related to our activities Compliance with applicable regulatory requirements Defined objectives, targets and programs for continuous improvement
We monitor and measure the performance of our IMS and take the necessary corrective and pre-ventive actions in case of any deviation.
Environmental Aspects
The HYL process uses desulphurized heated natural gas to reduce the iron pellets. The steam used in the process is condensed and reused.
CO2 emissions are minimized by using a dedicated CO2 absorption system. The plant’s environmental emissions (noise, gas, liquids, solid) respect strict environment rules as applied worldwide.
3.2
3.2.1
3.2.3
3.2.2
Certificate of Approval
Cert. Ref: AllC112010
The use of the Accreditation Mark indicates accreditation in respect of
those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
040801The Certificate Number is:
UK Certification Authority for Reinforcing Steels
01-January-2011
402 227
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
Emirates Steel Industries
at its establishment at
This is to certify that
Product Conformity Certification
has satisfied the Authority that it operates a Quality System that complies with the requirements of BS EN ISO 9001
2008 and the relevant CARES Quality and Operations Assessment Schedules. Where appropriate, and as listed below, it
has further satisfied the Authority that it manufactures and/or supplies products that conform with the stated product
standards and is entitled to use the CARES marks on its products.
Abu Dhabi
BS 4449 2005 Grade B500B Bar 8 to 32mm
BS 4449 2005 Grade B500B Coil 8 to 12mm
BS 4449 1997 Grade 460B Bar 8 to 32mm
BS 4449 1997 Grade 460B Coil 8 to 16mm
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Certificate of Approval
Cert. Ref: AllC112010
The use of the Accreditation Mark indicates accreditation in respect of
those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
1122The Certificate Number is:
UK Certification Authority for Reinforcing Steels
01-January-2011
402 228
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
Emirates Steel Industries
at its establishment at
This is to certify that
Quality Management System Certification
has satisfied the Authority that it operates a Quality Management System that complies with the requirements of
BS EN ISO 9001 2008
Abu Dhabi
Production of continuously cast steel billets
Production of hot rolled steel bar and coil for the reinforcement of concrete
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Certificate of Approval
Cert. Ref.: MS1400118001
The use of the Accreditation Mark indicates accreditation in respect
of those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
1268The Certificate Number is:
UK Certification Authority for Reinforcing Steels
05-January-2011
402
Emirates Steel Industriesat its establishment at
This is to certify that
Production of continuously cast steel billets and the production of hot rolled steel bar and
coil for the reinforcement of concrete
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Abu Dhabi
CARES Sustainable Reinforcing Steel Appendix 01
545
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
has satisfied the Authority that it complies with the requirements of the CARES sustainable reinforcing steel
scheme for the following operational assessment schedule and scope:
Sustainable Reinforcing Steel Certification
Emirates Steel
12 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
In our steel making process, the waste generated (tons per annum) is recycled as follows:
DRI – Direct Reduced iron
DRI Sludge 35,000 Used in cement industry Iron oxide fines 40,000 Used in cement industry Cold DRI fines 3,000 Used in cement industry
Steel Melt Shop
Slag 230,000 Used in road works Fume treatment plant dust/fines 36,000 Used in cement industry / land filling Concast scales 15,000 Used in cement industry
Rolling Mill
Billet Reheating dry scales 17,500 Used in cement industry Steel Scrap generated -2.50% Reused in the EAF
Awards and Merits
Emirates Steel has won several commendations in the industry based on performance.
Abu Dhabi Industry Award 2008
Abu Dhabi Industrial City Award (ICAD)
Zayed University Award
Baniyas Sports Club Award
Merit Certificate for “Made in UAE” 15-24 March 2006
Sheikh Khalifa Industry Award 2005
Alumex Award 27-29 March 2005
Best Stand Award – National 2005
Merit Certificate from General Secretariat of Municipalities
3.3
Certificate of Approval
Cert. Ref: AllC112010
The use of the Accreditation Mark indicates accreditation in respect of
those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
040801The Certificate Number is:
UK Certification Authority for Reinforcing Steels
01-January-2011
402 227
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
Emirates Steel Industries
at its establishment at
This is to certify that
Product Conformity Certification
has satisfied the Authority that it operates a Quality System that complies with the requirements of BS EN ISO 9001
2008 and the relevant CARES Quality and Operations Assessment Schedules. Where appropriate, and as listed below, it
has further satisfied the Authority that it manufactures and/or supplies products that conform with the stated product
standards and is entitled to use the CARES marks on its products.
Abu Dhabi
BS 4449 2005 Grade B500B Bar 8 to 32mm
BS 4449 2005 Grade B500B Coil 8 to 12mm
BS 4449 1997 Grade 460B Bar 8 to 32mm
BS 4449 1997 Grade 460B Coil 8 to 16mm
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Certificate of Approval
Cert. Ref: AllC112010
The use of the Accreditation Mark indicates accreditation in respect of
those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
1122The Certificate Number is:
UK Certification Authority for Reinforcing Steels
01-January-2011
402 228
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
Emirates Steel Industries
at its establishment at
This is to certify that
Quality Management System Certification
has satisfied the Authority that it operates a Quality Management System that complies with the requirements of
BS EN ISO 9001 2008
Abu Dhabi
Production of continuously cast steel billets
Production of hot rolled steel bar and coil for the reinforcement of concrete
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Certificate of Approval
Cert. Ref.: MS1400118001
The use of the Accreditation Mark indicates accreditation in respect
of those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
1268The Certificate Number is:
UK Certification Authority for Reinforcing Steels
05-January-2011
402
Emirates Steel Industriesat its establishment at
This is to certify that
Production of continuously cast steel billets and the production of hot rolled steel bar and
coil for the reinforcement of concrete
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Abu Dhabi
CARES Sustainable Reinforcing Steel Appendix 01
545
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
has satisfied the Authority that it complies with the requirements of the CARES sustainable reinforcing steel
scheme for the following operational assessment schedule and scope:
Sustainable Reinforcing Steel Certification
Emirates Steel
13 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
CertificatesCommercial License
44.1
Emirates Steel
14 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Industrial License4.2
Emirates Steel
15 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
ADCCI Membership4.3
Emirates Steel
16 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
13
DCL-Scope of certification4.4
Emirates Steel
17 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
14
4.5 UK certification Authority for Reinforcing Steels
Certificate of Approval
Cert. Ref: AllC112010
The use of the Accreditation Mark indicates accreditation in respect of
those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
1122The Certificate Number is:
UK Certification Authority for Reinforcing Steels
01-January-2011
402 228
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
Emirates Steel Industries
at its establishment at
This is to certify that
Quality Management System Certification
has satisfied the Authority that it operates a Quality Management System that complies with the requirements of
BS EN ISO 9001 2008
Abu Dhabi
Production of continuously cast steel billets
Production of hot rolled steel bar and coil for the reinforcement of concrete
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Emirates Steel
18 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
15
Certificate of Approval
Cert. Ref: AllC112010
The use of the Accreditation Mark indicates accreditation in respect of
those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
040801The Certificate Number is:
UK Certification Authority for Reinforcing Steels
01-January-2011
402 227
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
Emirates Steel Industries
at its establishment at
This is to certify that
Product Conformity Certification
has satisfied the Authority that it operates a Quality System that complies with the requirements of BS EN ISO 9001
2008 and the relevant CARES Quality and Operations Assessment Schedules. Where appropriate, and as listed below, it
has further satisfied the Authority that it manufactures and/or supplies products that conform with the stated product
standards and is entitled to use the CARES marks on its products.
Abu Dhabi
BS 4449 2005 Grade B500B Bar 8 to 32mm
BS 4449 2005 Grade B500B Coil 8 to 12mm
BS 4449 1997 Grade 460B Bar 8 to 32mm
BS 4449 1997 Grade 460B Coil 8 to 16mm
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
4.6 UK certification Authority for Reinforcing Steels
Emirates Steel
19 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
16
4.7 Certificates of Production Conformity (Dubai Municipality) BS4999:1997
Emirates Steel
20 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
17
4.8 Certificates of Production Conformity (Dubai Municipality) BS4999:2005
Emirates Steel
21 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
18
4.9 ESMA certificate of conformity -BS4449:2005 & BS4449:1997
Emirates Steel
22 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
4.10 ESMA -License of the use of the emirates mark of Conformity
Emirates Steel
23 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
4.11 Management System-EN ISO 14001-2009
Emirates Steel
24 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
4.12 Management System-BS OHSAS 18001-2007
Emirates Steel
25 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Certificate of Approval
Cert. Ref.: MS1400118001
The use of the Accreditation Mark indicates accreditation in respect
of those activities covered by the accreditation certificate number 002.
Executive Director
Signed on behalf of the Board of Management
31-December-2011Expiry Date:Issue Date:
1268The Certificate Number is:
UK Certification Authority for Reinforcing Steels
05-January-2011
402
Emirates Steel Industriesat its establishment at
This is to certify that
Production of continuously cast steel billets and the production of hot rolled steel bar and
coil for the reinforcement of concrete
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
Abu Dhabi
CARES Sustainable Reinforcing Steel Appendix 01
545
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
has satisfied the Authority that it complies with the requirements of the CARES sustainable reinforcing steel
scheme for the following operational assessment schedule and scope:
Sustainable Reinforcing Steel Certification
4.13 Sustainability certificate
Emirates Steel
26 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
21
5 Mill Test Reports
Emirates Steel
27 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Emirates Steel
28 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
23
Emirates Steel
29 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
24
Emirates Steel
30 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
25
Emirates Steel
31 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Emirates Steel
32 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Emirates Steel
33 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
2726
Emirates Steel
34 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
28
Emirates Steel
35 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Emirates Steel
36 P.O. Box: 9022, ICAD, Abu Dhabi, UAE, Tel: +971 2 507 2144 Fax: +971 2 551 5113 www.esi-steel.com
Tel. +971 2 507 2144Fax. +971 2 551 5113web: www.esi-steel.com