BOLTEC MC TRAINING Module 1 For Barrick Goldstrike Mines Incorporated.

BOLTEC MC TRAININGBOLTEC MC TRAINING BOLTEC MC TRAININGBOLTEC MC TRAINING

Module 1For

Barrick Goldstrike Mines Incorporated

Matt Roemmich AC ElkoDan Gravelle AC ElkoBen Lupercio BGMI ElkoPaul Smith BGMI Elko Jaaron Johnson AC Denver

TrainersTrainers

Introduction

Introduction

OrientationOrientation

Introduction

Safety Share!Safety Share!

Introduction

Atlas CopcoBackgroundAtlas CopcoBackground

Introduction

Atlas CopcoBackgroundAtlas CopcoBackground

Introduction

Construction & Mining Technique

U/G Rock Excavation

Surface Drilling Equip.

Rocktec

Secoroc & BHMT

Construction Tools

Craelius

Drilling Solutions

Dynapac

CompressorTechnique

Airtec

Portable Air

Industrial Air

Oil-free Air

Gas and Process

IndustrialTechnique

Milwaukee Electric Tool

Atlas Copco Electric Tools

Atlas Copco Tools and Assembly Systems

Chicago Pneumatic

Atlas CopcoStockholm, Sweden

Construction & Mining Technique

Underground Drilling Equipment

Underground Loaders and Trucks

Construction & Mining Technique

Construction & Mining Technique

Rock Drilling Tools

Construction & Mining Technique

Surface Drilling Equipment

Construction & Mining Technique

Construction Tools

Construction & Mining Technique

Geotechnical Drilling Equipment

Compressor Technique

Industrial Technique

Introduction

Partners of the Future

Partners of the Future

Introduction

Rock RaceRock Race

Module 1Module 1

MODULE 1 OBJECTIVES

ELECTRICAL SYSTEM

INTRO-DUCTION

ESSENCE OF CONTRACTWORK MANAGEMENT

CMMS

MACHINE FAMILIARIZATION

RIG CONTROLS

RIG OPERATION

MANUALSRCS

OVERVIEWHYDRAULIC

SYSTEMS

CLAIR

PRACTICAL OPERATION

RIG MOVEMENTS

PREVENTIVE MAINTENANCE

TESTING

Course Map

Introduction

Learning Objectives

Objective 1: Introduction

Learners will see some of Atlas Copco’s products, history, meet the trainers and see the Boltec MC.

Objective 2: Barrick Presentation

Learners will review the contract obligations, responsibilities, pay items and discuss the spirit of the contract. Learners will see how to open a work order, hear about AMP, data management and the overall BGMI CMMS (EAM).

Objective 3: Machine Familiarization

Learners will see some of Atlas Copco’s terminology, signs, symbols and locations / definitions of Boltec MC components.

Introduction

Learning Objectives (continued)

Objective 4: Rig Controls

Learners will be able to identify the Boltec MC levers, buttons, switches and emergency features.

Objective 5: Rig Operation

Learners will see the fundamentals of rig startup, operating on diesel, operating on electric power, tramming and boom positioning.

Objective 6: Manuals

Learners will see how Atlas Copco organizes Boltec MC manuals as Operators Instructions, and Spare Parts Catalogs. Each section will be shown on the paper manuals and ActiView manuals will be shown.

Introduction

Learning Objectives (continued)

Objective 7: RCS Overview

Learners will see an introduction to the rig control system and be able to identify the system components.

Objective 8: Hydraulic System

Learners will be introduced to the components used in a Boltec MC hydraulic system including valves, sensors, pumps, filters and the corresponding schematic symbols.

Objective 9: Preventive Maintenance

Learners will be shown how to do regularly scheduled maintenance on the machine and the basic safety procedures to safely carry out the prescribed maintenance. Learners will be able to identify “critical task” actions.

Objective 10: CLAIR

Learners will be shown how to do daily washing, cleaning, lubrication, adjustment, inspection and repair (CLAIR bay).

Introduction

Learning Objectives (continued)

Objective 11: Electrical System

Learners will be introduced to the components used in a Boltec MC electric system including the RCS interface, 24 Volt system and 480 Volt system.

Objective 12: Basic Rig Movements

Learners will be shown how the controls of the rig correspond to movements for tramming and boom positioning. Learners will see how to do a brake test.

Objective 13: Practical Rig Operation

Learners will have hands on practice operating the boom, tramming the rig and reviewing test material.

Objective 14: MSHA 5000-23 and Testing

Learners will be field tested on boom positioning, tramming, and a written exam.

Introduction

NO SMOKING IN LECTURE ROOM

TEA BREAKS BETWEEN OBJECTIVES

NO CELL PHONES ON DURING CLASS

LUNCH @ 11:15 TO 12:05 PM

Course Norms

Introduction

Boltec MC Introduction

Safe RockSafe Rock

Scaling in the tunnel cycle

Boltec MC

Michelin X-Mine D2 12 x 20 Tires Outer Turning Radius: 6250mm Inner Turning Radius: 3800mm Height 3010mm

Boltec MC

Boltec MC

Coverage Area

Boltec MC

Hydraulic rock drill COP 1532

For tunnel height 3.0 -12 m

For bolt length 1.5 - 6.0 m

Magazine 10 bolts

Weight of rig 15 - 20 ton

RCS System

•Distributed computer power. A number of computers control its own part of the process.•Computers connected over a data communication network

•The technique is called Controller Area Network

•Simple Design

•Easy operator interface

•Assisted troubleshooting

•Advanced rockdrill control

Boltec MC

Boltec MC

Boltec MC

Questions?Questions?

Break!Break!