All brackets are made to be adjustable so that they may fit our range of different exhausts available for this motor- cycle. Please note all panels should have an air gap between the stock bodywork and exhaust. Make sure to use appropriate thread locking compound on all fasteners to avoid them coming loose with vibration. Left Side - Stock Bolt BMW S1000RR ’20 Belly Cover Fitting Diagram OEM BMW removed parts, re-used for fitting: 2x BMW Stock Bolts Austin Racing parts used for fitting: 1x Right Hand Side Carbon Cover 1x Left Hand Side Carbon Cover 4x Stainless Steel Brackets 5x M5 Panel Clips 5x M5 x 16mm Bolts 1x M8 x 16mm with washers Front M5 x 16mm M5 x 16mm M5 x 16mm X2 M5 x 16mm Right Side - Stock Bolt Underneath, Rear - M8 x 16mm