*1 Theoretical value. Transmit range is also affected by the Bluetooth capability of the target device and the conditions of the surrounding environment. *2 It is not possible to connect to another device when using an audio file and phone file simultaneously. *3 When there is a long distance between this unit and Bluetooth device, the power consumption for each will increase resulting in shorter available time. Please ensure that the device's Bluetooth functions can be used. If pairing mode cuts off due to time out, it is necessary to perform the settings again. Confirm that the device supports the profiles used by this product. Try finitely adjusting the position of the microphone in the control box. Adjust the microphone output level on your mobile phone or device. LBT-AR120 0000 (Four zeros) Multi-function button This button turns the power ON/OFF, as well as performs the functions listed below: Power ON/Pairing Power OFF When power is ON, press and hold for 4 seconds or more. Volume button, play/pause button LED lamp Earphone jack Insert your stereo earphones into this jack when using. When charging, insert the pin side of the included USB charging cable into the main unit and the other side (USB Type-A) to the PC or AC adapter. Microphone Clip Insert your earphones into the earphone jack when using. Earphones are not included with this product. Function/Status Operation LED display Power ON When the power is OFF, press and hold the multi-function button for 4 seconds or more Blinks purple and red once Power OFF When the power is ON, press and hold the multi-function button for 4 seconds or more Blinks purple Charging - Lights red Charging complete - Light is off Not enough charge in battery - LED blinks red 3 times every 30 seconds Pairing mode When the power is OFF, press and hold the multi-function button for 8 seconds or more Alternately blinking red and blue Volume adjustment Press the (+) or (-) side of the volume button - Pause/mute Press the play/pause button once - Track skip forward/ track skip reverse Press the or side of the volume button - Fast-forward/reverse Press and hold the or side of the volume button for 2 seconds or more Answer call Press the multi-function button once, shortly. - Reject a call Press and hold the multi-function button for 2 seconds or more LED blinks red and purple, then goes out Hang up phone Press the multi-function button once, shortly. - Redial Press the multi-function button twice Blinks purple once Article No. LBT-AR120 series Carrier Signal 2.400 - 2.480 GHz Bluetooth Specifications Bluetooth 2.1 + EDR Frequency diffusion method Class 2 FHSS (Frequency Hopping Spread Spectrum) Transmit range Class 2 Max. radius 10 m (if unobstructed) *1 Supported Profiles A2DP (Advanced Audio Distribution Profile)*2, AVRCP (Audio/Video Remote Control Profile)*2, HSP (Headset Profile)*2, HFP (Heads-free Profile)*2 SCMS-T 8 Max. no. of pairing devices Pattern antenna Continuous standby time Max. 200 hrs. *3 Music playback/conversation time Approx. 6 hrs. *3 Environment conditions When operating Temperature Relative humidity 0 - 35°C 20 - 80% (no condensation) When storing Temperature Relative humidity -10 - +50°C 10 - 90% (no condensation) Input voltage 5 VDC (supplied by USB charging cable) Battery type Lithium polymer battery External dimensions (W x H x D) 21 x 13 x 55 mm (Excl. protrusions) Weight Approx. 13 g Bluetooth audio receiver for music and conversation Supports Bluetooth 2.1 + EDR LBT-AR120 series User's Manual Thank you for purchasing this quality Elecom product. Store this manual carefully in a place where it can be easily accessed at any time. Product features This product is a Bluetooth audio receiver. Connect your earphones to this product to enjoy wireless music listening through your Bluetooth-equipped smartphone, mobile phone or audio player. Or, enjoy hands free conversation on your smartphone or mobile phone via the built-in microphone. Package Contents Audio receiver main unit x 1 unit USB charging cable x 1 User's Manual (Warranty) (This document) x 1 sheet Part Names Charging This product must be charged before use. Perform charging by connecting the included USB cable to a PC, USB AC adapter or other USB power source. Connect the included USB charging cable to the earphone jack on this unit. Connect the USB A connector of the USB charging cable to the USB ports of your PC, etc. If the PC is not plugged into a power supply, plug it in. Pairing (Registering with the device) To use this product with a mobile phone or audio player, it is required to perform pairing (registering the device for the first time) with the device with which you want to use. Please refer to the manual of your device for information regarding the operation of the device. The LED lamp lights up red and charging begins. LED lamp turns off when charging is complete. Basic Operation Basic Specifications Due to interference, it may sometimes not be possible to use in combination with a 2.4 GHz band wireless LAN (IEEE802.11g/b/n). It is not guaranteed that all Bluetooth devices will work with this product. Troubleshooting With some mobile phones if there is a silence during conversation that is longer than approx. 20 seconds, the phone will automatically go into power saving mode and the earphone jack will turn off sound input/output. Because of this, sound may sometimes turn off during conversation. If this occurs, press the multi-function button on this product to take the phone out of power saving mode. No voice heard during phone conversation This product does not have any power. Always ensure that the battery for this product is fully charged. If the battery is not fully charged, charge it. Line noise or echoes can be heard. Try adjusting the distance between this product and the paired device. Also try adjusting the volume, etc. When a call is received on the mobile phone, even when the multi-function button is pressed it does not answer the call. With some mobiles phones, it may be necessary to press the multi-function button several times before the conversation will start. If the phone will not answer after pressing the multi-function button once, try pressing it several times. Your conversation partner cannot hear your voice. With some mobile phones it is necessary to manually set the microphone input settings to ON. If the microphone input is turned OFF, your conversation partner will not be able to hear your voice spoken from the headset microphone. Cannot hear the sound of audio files Bluetooth audio playback does not support certain web content and file types. Contact the site from which you downloaded the audio file. Headset does not work when placing a call. When placing a call on your mobile phone, it is necessary to switch operation from this product to the Bluetooth headset. Please refer to the manual of your mobile phone for information on how to perform this. After using with a different mobile phone, it is necessary to perform pairing again Depending on your mobile phone or other device, after using the paired headset with another phone or device, it may be necessary to perform pairing again. Your own voice is too quiet Cannot hear any audio on movies/video except for One Seg Depending on your device specifications, Bluetooth may not support audio playback of downloaded promotional videos, etc. The phone immediately goes to voice mail when an incoming call is received. If the phone is set to go to voicemail after a short time, the voicemail will kick in before the call is forwarded to this product. If this occurs, set your phone to wait for a longer time before a call goes to voicemail service. Cannot perform pairing with a Bluetooth device. Because of digital copyright protection, it cannot be played on a digital Bluetooth headset. Cannot hear audio on PV downloaded on your mobile phone Supports AVRCP protocol. Control features like pause/play and volume adjustment of your smartphone or audio player from this product. It takes about 2 hours to fully charge this product. If the LED lamp has not turned off after 2 hours, immediately disconnect the charging cable and stop charging. Charging for more than two hours can shorten the battery life and may lead to device failure. Bluetooth audio receiver for music and conversation This product connects to a device using Bluetooth. Pairing registration must be performed before using this product with the intended device (smartphone/audio player, etc.). Necessary information when connecting: Product device name when detected in a search from a mobile device: Link Key: * Link Key entry is required when connecting to devices using Bluetooth 2.0 or earlier. Important Notice The included USB charging cable is meant for use with this product ONLY. Do not use this cable for any purpose other than charging this product. Although the connector type may be the same, differences in electrical poles and output may cause damage. Similarly, do not use the charging cable included with another product to charge this product. If connecting a mobile phone to this product to use as an audio player, the mobile phone must support Bluetooth audio profile (A2DP). If pairing cannot be completed due to problems such as a setting on the connection device, turn off the power once, and try again. With the power turned OFF, press and hold the multi-function button for 8 seconds or more, until the LED lamps begins blinking red and blue. When pressing and holding the button for 8 seconds, the LED lamp will display as Blinks purple and red once (Power ON) Blinks red and blue (Pairing mode) If the paired devices are close by, you can remove your finger from the button as soon as power turns ON. Perform a search for this product from the pairing device (mobile phone, PC, etc.) Search method varies depending on the device your are using. Refer to the manual of your device. When this product is found from the mobile phone or PC, the device name will be displayed as [LBT-AR120] in the search screen. Select and register. If a message appears prompting you to enter a link key, enter [0000] (four zeros). Depending on the (Bluetooth 2.1) device, registration may complete without having to enter a link key. Depending on the device, it may be necessary to perform a [Connection] procedure after pairing is completed. Please refer to the manual of your mobile device for information, and perform a [Connection] procedure if necessary. [Charging connection] PC To PC USB port Connect to your PC or USB AC adapter and charge. Lights red when charging. Light turns off when charging is complete. Main unit Your USB AC Adapter Not included with this product To AC wall outlet Series A connector Charging connector USB charging cable Power ON/OFF Press and hold the multi-function button on this device for approx. 4 seconds until the LED light blinks purple and red one time. The headset will automatically connect to any devices in range on which pairing has already been performed. If no paired devices can be found, the LED blinks red. Press and hold the multi-function button of this product for 4 seconds or more. The LED lamp blinks red and turns off, indicating the power is now OFF. Power ON Power OFF Listening to music Adjusting the volume Perform with the volume button on this product. Press the (+) side to increase the volume, and the (-) side to decrease the volume. Pause/mute Track skip forward ( ) / Track skip reverse ( ) * Perform with the play/pause button on this product. When playing music, press the play/pause button to pause or mute the music. When paired with a device that supports AVRCP profile, this will pause the music on the connected device as well. Perform track skip forward and track skip reverse with the volume button on this product. When music is playing or paused, press the ( ) side of the button to skip to the next track, or the ( ) side of the button to skip back to the previous track. * Depending on the connected device, this function may not work as specified. Making a call on a mobile phone, etc. Function list This product features a microphone on the upper part of the main unit. Depending on the device specifications, your mobile phone may behave in a different manner than described in relation to the operation of this product. Receiving a call If you hear a ringtone in your earphone, press the multi-function button. Depending on the device specifications, ringtones may not be heard on the Bluetooth headset. Placing a call To place an arbitrary call, after dialling the recipient number switch the sound output setting. * Refer to the manual of your mobile phone for information of switching the sound output setting. When using iPhone 4 After the call, change the sound output setting to LBT-AR120 (the device name for this product). Example: Android After calling, press the onscreen "Bluetooth" button. Hanging up the call When in conversation, press the multi-function button once.
3
Embed
Bluetooth audio receiver Charging Basic Operation … charging, insert the pin side of the included USB charging cable into the main unit and the other side (USB Type-A) to the PC
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
*1 Theoretical value. Transmit range is also affected by the Bluetooth capability of the target device and the conditions of the surrounding environment.
*2 It is not possible to connect to another device when using an audio file and phone file simultaneously.
*3 When there is a long distance between this unit and Bluetooth device, the power consumption for each will increase resulting in shorter available time.
Please ensure that the device's Bluetooth functions can be used. If pairing mode cuts off due to time out, it is necessary to perform the settings again.Confirm that the device supports the profiles used by this product.
Try finitely adjusting the position of the microphone in the control box.Adjust the microphone output level on your mobile phone or device.
LBT-AR120
0000 (Four zeros)
Multi-function button This button turns the power ON/OFF, as well as performs the functions listed below:
Power ON/Pairing
Power OFF When power is ON, press and hold for 4 seconds or more.
Volume button, play/pause button
LED lamp
Earphone jack Insert your stereo earphones into this jack when using.When charging, insert the pin side of the included USB charging cable into the main unit and the other side (USB Type-A) to the PC or AC adapter.
Microphone
Clip
Insert your earphones into the earphone jack when using. Earphones are not included with this product.
Function/Status Operation LED display
Power ON When the power is OFF, press and hold the multi-function button for 4 seconds or more
Blinks purple and red once
Power OFF When the power is ON, press and hold the multi-function button for 4 seconds or more Blinks purple
Charging - Lights red
Charging complete - Light is off
Not enough charge in battery - LED blinks red 3 times
every 30 seconds
Pairing mode When the power is OFF, press and hold the multi-function button for 8 seconds or more
Alternately blinking red and blue
Volume adjustment Press the (+) or (-) side of the volume button -
Pause/mute Press the play/pause button once -
Track skip forward/track skip reverse
Press the or side of the volume button -
Fast-forward/reverse Press and hold the or side of the volume button for 2 seconds or more
Answer call Press the multi-function button once, shortly. -
Reject a call Press and hold the multi-function button for 2 seconds or more
LED blinks red and purple, then goes out
Hang up phone Press the multi-function button once, shortly. -
Redial Press the multi-function button twice Blinks purple once
Article No. LBT-AR120 series
Carrier Signal 2.400 - 2.480 GHz
Bluetooth Specifications Bluetooth 2.1 + EDR
Frequency diffusion method Class 2 FHSS (Frequency Hopping Spread Spectrum)
Transmit range Class 2 Max. radius 10 m (if unobstructed) *1
Supported Profiles A2DP (Advanced Audio Distribution Profile)*2, AVRCP (Audio/Video Remote Control Profile)*2, HSP (Headset Profile)*2, HFP (Heads-free Profile)*2
SCMS-T 8
Max. no. of pairing devices Pattern antenna
Continuous standby time Max. 200 hrs. *3
Music playback/conversation time Approx. 6 hrs. *3
Environment conditions
When operating
TemperatureRelative humidity
0 - 35°C20 - 80% (no condensation)
When storing
TemperatureRelative humidity
-10 - +50°C10 - 90% (no condensation)
Input voltage 5 VDC (supplied by USB charging cable)
Battery type Lithium polymer battery
External dimensions (W x H x D) 21 x 13 x 55 mm (Excl. protrusions)
Weight Approx. 13 g
Bluetooth audio receiverfor music and conversation
Supports Bluetooth 2.1 + EDR
LBT-AR120 series User's Manual
Thank you for purchasing this quality Elecom product. Store this manual carefully in a place where it can be easily accessed at any time.
Product featuresThis product is a Bluetooth audio receiver.Connect your earphones to this product to enjoy wireless music listening through your Bluetooth-equipped smartphone, mobile phone or audio player. Or, enjoy hands free conversation on your smartphone or mobile phone via the built-in microphone.
Package ContentsAudio receiver main unit x 1 unitUSB charging cable x 1User's Manual (Warranty) (This document) x 1 sheet
Part Names
Charging
This product must be charged before use. Perform charging by connecting the included USB cable to a PC, USB AC adapter or other USB power source.
Connect the included USB charging cable to the earphone jack on this unit.
Connect the USB A connector of the USB charging cable to the USB ports of your PC, etc.
If the PC is not plugged into a power supply, plug it in.
Pairing (Registering with the device)
To use this product with a mobile phone or audio player, it is required to perform pairing (registering the device for the first time) with the device with which you want to use.Please refer to the manual of your device for information regarding the operation of the device.
The LED lamp lights up red and charging begins. LED lamp turns off when charging is complete.
Basic Operation Basic Specifications
Due to interference, it may sometimes not be possible to use in combination with a 2.4 GHz band wireless LAN (IEEE802.11g/b/n).
It is not guaranteed that all Bluetooth devices will work with this product.
Troubleshooting
With some mobile phones if there is a silence during conversation that is longer than approx. 20 seconds, the phone will automatically go into power saving mode and the earphone jack will turn off sound input/output. Because of this, sound may sometimes turn off during conversation. If this occurs, press the multi-function button on this product to take the phone out of power saving mode.
No voice heard during phone conversation
This product does not have any power.Always ensure that the battery for this product is fully charged. If the battery is not fully charged, charge it.
Line noise or echoes can be heard. Try adjusting the distance between this product and the paired device. Also try adjusting the volume, etc.
When a call is received on the mobile phone, even when the multi-function button is pressed it does not answer the call.
With some mobiles phones, it may be necessary to press the multi-function button several times before the conversation will start. If the phone will not answer after pressing the multi-function button once, try pressing it several times.
Your conversation partner cannot hear your voice. With some mobile phones it is necessary to manually set the microphone input settings to ON. If the microphone input is turned OFF, your conversation partner will not be able to hear your voice spoken from the headset microphone.
Cannot hear the sound of audio filesBluetooth audio playback does not support certain web content and file types. Contact the site from which you downloaded the audio file.
Headset does not work when placing a call.When placing a call on your mobile phone, it is necessary to switch operation from this product to the Bluetooth headset. Please refer to the manual of your mobile phone for information on how to perform this.
After using with a different mobile phone, it is necessary to perform pairing again
Depending on your mobile phone or other device, after using the paired headset with another phone or device, it may be necessary to perform pairing again.
Your own voice is too quiet
Cannot hear any audio on movies/video except for One SegDepending on your device specifications, Bluetooth may not support audio playback of downloaded promotional videos, etc.
The phone immediately goes to voice mail when an incoming call is received.
If the phone is set to go to voicemail after a short time, the voicemail will kick in before the call is forwarded to this product. If this occurs, set your phone to wait for a longer time before a call goes to voicemail service.
Cannot perform pairing with a Bluetooth device.
Because of digital copyright protection, it cannot be played on a digital Bluetooth headset. Cannot hear audio on PV downloaded on your mobile phone
Supports AVRCP protocol. Control features like pause/play and volume adjustment of your smartphone or audio player from this product.
It takes about 2 hours to fully charge this product. If the LED lamp has not turned off after 2 hours, immediately disconnect the charging cable and stop charging. Charging for more than two hours can shorten the battery life and may lead to device failure.
Bluetooth audio receiverfor music and conversation
This product connects to a device using Bluetooth. Pairing registration must be performed before using this product with the intended device (smartphone/audio player, etc.).
Necessary information when connecting:Product device name when detected in a search from a mobile device:
Link Key:
* Link Key entry is required when connecting to devices using Bluetooth 2.0 or earlier.
Important NoticeThe included USB charging cable is meant for use with this product ONLY. Do not use this cable for any purpose other than charging this product. Although the connector type may be the same, differences in electrical poles and output may cause damage. Similarly, do not use the charging cable included with another product to charge this product.
If connecting a mobile phone to this product to use as an audio player, the mobile phone must support Bluetooth audio profile (A2DP).
If pairing cannot be completed due to problems such as a setting on the connection device, turn off the power once, and try again.
With the power turned OFF, press and hold the multi-function button for 8 seconds or more, until the LED lamps begins blinking red and blue. When pressing and holding the button for 8 seconds, the LED lamp will display as
Blinks purple and red once (Power ON)
Blinks red and blue (Pairing mode)
If the paired devices are close by, you can remove your finger from the button as soon as power turns ON.Perform a search for this product from the pairing device (mobile phone, PC, etc.) Search method varies depending on the device your are using. Refer to the
manual of your device.
When this product is found from the mobile phone or PC, the device name will be displayed as [LBT-AR120] in the search screen. Select and register.
If a message appears prompting you to enter a link key, enter [0000] (four zeros). Depending on the (Bluetooth 2.1) device, registration may complete without
having to enter a link key.
Depending on the device, it may be necessary to perform a [Connection] procedure after pairing is completed. Please refer to the manual of your mobile device for information, and perform a [Connection] procedure if necessary.
[Charging connection]
PC
To PC USB port
Connect to your PC or USB AC adapter
and charge.
Lights red when charging.Light turns off when charging is complete.
Main unit
Your USB AC Adapter Not included with this product
To AC wall outlet
Series A connector
Charging connector
USB charging cable
Power ON/OFF
Press and hold the multi-function button on this device for approx. 4 seconds until the LED light blinks purple and red one time. The headset will automatically connect to any devices in range on which pairing has already been performed. If no paired devices can be found, the LED blinks red.
Press and hold the multi-function button of this product for 4 seconds or more. The LED lamp blinks red and turns off, indicating the power is now OFF.
Power ON
Power OFF
Listening to music
Adjusting the volumePerform with the volume button on this product. Press the (+) side to increase the volume, and the (-) side to decrease the volume.
Pause/mute
Track skip forward ( ) / Track skip reverse ( ) *
Perform with the play/pause button on this product.When playing music, press the play/pause button to pause or mute the music. When paired with a device that supports AVRCP profile, this will pause the music on the connected device as well.
Perform track skip forward and track skip reverse with the volume button on this product.When music is playing or paused, press the ( ) side of the button to skip to the next track, or the ( ) side of the button to skip back to the previous track.* Depending on the connected device, this function may not work as specified.
Making a call on a mobile phone, etc.
Function list
This product features a microphone on the upper part of the main unit.
Depending on the device specifications, your mobile phone may behave in a different manner than described in relation to the operation of this product.
Receiving a callIf you hear a ringtone in your earphone, press the multi-function button.
Depending on the device specifications, ringtones may not be heard on the Bluetooth headset.
Placing a callTo place an arbitrary call, after dialling the recipient number switch the sound output setting.
* Refer to the manual of your mobile phone for information of switching the sound output setting.
When using iPhone 4 After the call, change the sound output setting to LBT-AR120 (the device name for this product).Example: AndroidAfter calling, press the onscreen "Bluetooth" button.
Hanging up the callWhen in conversation, press the multi-function button once.
LBT-AR120
0000 (cuatro ceros)
Inserte los auriculares en el jack para auriculares cuando vaya a utilizar el producto. Los auriculares no se incluyen con este producto.
LBT-AR120
0000 (quatro zeros)
Insira seus fones de ouvido na tomada de fone de ouvido ao fazer uso do aparelho.Fones de ouvido não são fornecidos com este produto.
Botón muntifunción Este botón enciende/apaga el producto, además de realizar las funciones que se detallan a continuación:
Encendido/Emparejamiento
Apagado OFF Estando apagado, pulse prolongadamente este botón durante 4 segundos o más.
Botón de volumen, botón de reproducción/pausa
Luz LED
Jack para auriculares Inserte los auriculares estéreo en este jack cuando vaya a utilizar el producto. Cuando vaya a cargar el producto, inserte el extremo con clavija del cable de carga USB suministrado en la unidad principal y el otro extremo (USB tipo A) en el PC o en el adaptador de CA.
Micrófono Pinza
Botão multifuncional Este botão liga/desligar o aparelho, além de realizar as funções listadas abaixo:
Ligar/aparelhamento
Desligar Quando a alimentação estiver ligada, pressione e mantenha pressionado por quatro segundos ou mais.
Botão de volume, botão para executar/pausar
Lâmpada de LED
Tomada de fone de ouvido Introduza seus fones de ouvido estéreo nesta tomada ao fazer uso do aparelho. Ao carregar, introduza o lado do pino do cabo de carregamento USB fornecido na unidade principal e a outra unidade (USB tipo A) no PC ou no adaptador AC.
Microfone Clipe
Ir a la pista siguiente ( ) / Ir a la pista anterior ( ) *
Receptor de audio Bluetoothpara conversaciones y música
Compatible con Bluetooth 2.1 + EDR
Serie LBT-AR120
Manual del usuario
Gracias por comprar este producto de calidad Elecom. Guarde este manual con cuidado en un lugar fácilmente accesible en cualquier momento.
Características del productoEste producto es un receptor de audio Bluetooth.Conecte los auriculares a este producto y disfrute escuchando de música sin cables a través de su móvil, smartphone o reproductor de audio dotado de Bluetooth. O bien, disfrute de una conversación manos libres utilizando su teléfono móvil o smartphone a través del micrófono incorporado.
ContenidoUnidad principal del receptor de audio x 1 unidadCable de carga USB x 1Manual del usuario (con garantía) (Este documento) x 1 hoja
Componentes
Cargar
Este producto debe cargarse antes de ser utilizado. Realice la carga conectando el cable USB suministrado a un PC, a un adaptador de CA USB u a otra fuente de alimentación USB.
Conecte el cable de carga USB suministrado al jack para auriculares de esta unidad.
Conecte el conector A USB del cable de carga USB a los puertos USB del PC, etc.
Si el PC no está conectado a la red eléctrica, hágalo.
Emparejamiento (proceso de registro con un dispositivo)
Para utilizar este producto con un teléfono móvil o un reproductor de audio, es necesario realizar el proceso de emparejamiento (registrar el dispositivo por primera vez) con el dispositivo con el que desea utilizarlo.Consulte el manual del dispositivo para obtener información sobre el funcionamiento de éste.
El piloto LED se ilumina en rojo y comienza la carga. El indicador LED se apaga cuando finaliza la carga.
Operaciones básicas
La carga completa de este producto dura unas 2 horas. Si el piloto LED no se apaga al cabo de 2 horas, desconecte inmediatamente cable de carga y detenga la carga. Los procesos de carga superiores a dos horas podrían reducir la vida útil de la batería y dar lugar a fallos en el dispositivo.
Información necesaria para realizar la conexión:Nombre de dispositivo del producto cuando se detecta desde un dispositivo móvil:
Clave de vinculación:
* Es necesario especificar una Clave de vinculación para conectarlo a dispositivos mediante Bluetooth 2.0 o versión anterior.
Aviso importanteEl cable de carga USB suministrado es para uso EXCLUSIVO con este producto. No utilice este cable para otra finalidad que no sea cargar este producto.
Si va a conectar un teléfono móvil a este producto para utilizarlo a modo de reproductor de audio, el teléfono móvil debe aceptar el perfil de audio Bluetooth (A2DP).
Si no puede completar el proceso de emparejamiento por problemas, como pudiera ser un ajuste en el dispositivo de conexión, apáguelo e inténtelo de nuevo.
Estando apagado, pulse prolongadamente el botón multifunción durante 8 segundos o más hasta que el piloto LED empiece a parpadear en rojo y azul. Cuando el botón se pulsa prolongadamente durante 8 segundos, el piloto LED indica lo siguiente:
Parpadea en morado y rojo una vez (encendido)
Parpadea en rojo y azul (modo de emparejamiento)
Si los dispositivos emparejados se encuentran próximos, puede retirar el dedo del botón tan pronto como se encienda el producto.Realice una exploración para detectar este producto desde el dispositivo de emparejamiento (teléfono móvil, PC, etc.)
Cuando se encuentre este producto desde el teléfono móvil o el PC, el nombre del dispositivo aparecerá como [LBT-AR120] en la pantalla de exploración. Selecciónelo y regístrelo.
Si aparece un mensaje solicitándole que especifique una clave de vinculación, escriba [0000] (cuatro ceros).
Según el dispositivo, puede que se tenga que realizar un procedimiento [Conexión] después de finalizar el emparejamiento. Consulte el manual de su dispositivo móvil para obtener información al respecto, y realice un procedimiento [Conexión] si fuese necesario.
ConectorA serie
Conector de carga
Encendido/Apagado
Pulse prolongadamente el botón multifunción de este dispositivo durante unos 4 segundos hasta que el piloto LED parpadee en morado y rojo una vez. Si el dispositivo o dispositivos cuentan con una función de conexión automática y está activada, la reconexión se producirá automáticamen-te. Si no se encuentra ningún dispositivo emparejado, el piloto LED parpadeará en rojo.
Pulse prolongadamente el botón multifunción de este producto durante 4 segundo o más. El piloto LED parpadea en rojo y se apaga indicando que el producto se ha apagado.
Encendido
Apagado
Escuchar músicaAjustar el volumenRealice esta operación con el botón de volumen de este producto. Pulse el lado (+) para aumentar el volumen y el lado (-) para disminuirlo.
Pause/silenciarRealice esta operación con el botón de reproducción/pausa de este producto.Durante la reproducción de música, pulse el botón de reproducción/pausa para detener temporalmente o silenciar la música. Cuando está emparejado con un dispositivo compatible con el perfil AVRCP, esta operación también detendrá temporalmente la música en el dispositivo conectado.
Utilice el botón de volumen de este producto para ir a la pista siguiente o ir a la pista anterior. Cuando la música está en pausa o en reproducción, pulse el lado ( ) del botón para avanzar a la pista siguiente, o el lado ( ) del botón para retroceder a la pista anterior.* Según el dispositivo conectado, es posible que esta función no proporcione los resultados esperados.
Realizar una llamada en un teléfono móvil, etc.
Este producto incorpora un micrófono en la parte superior de la unidad principal.
Recibir una llamadaSi escucha un tono de llamada en los auriculares, pulse el botón multifunción.
Realizar una llamadaPara realizar una llamada al azar, una vez marcado el número de destino cambie el ajuste de salida de sonido.
* Consulte el manual del teléfono móvil para obtener información sobre cómo cambiar el ajuste de salida de sonido.
Si utiliza un iPhone 4 Una vez finalizada la llamada, cambie el ajuste de salida de sonido a LBT-AR120 (el nombre de dispositivo de este producto).Ejemplo: AndroidUna vez finalizada la llamada, pulse el botón "Bluetooth" en la pantalla.
Finalizar una llamadaDurante una conversación, pulse el botón multifunción una vez.
[Conexión de carga]
PC
Conecte al PC o adaptador de CA USB
para cargar.
Se ilumina en rojo cuando está cargando.El indicador luminoso se apaga cuando finaliza la carga.
Unidad principal
Cable de carga USB
El adaptador de CA USB No se suministra con este producto
A la toma de corriente de CA mural
Al puerto USB del PC
Suporta Bluetooth 2.1 + EDR
Série LBT-AR120
Manual do usuário
Obrigado por adquirir este produto de qualidade da Elecom.Guarde este manual com cuidado em um lugar em que possa ser facilmente consultado a qualquer hora.
Características do produtoEste produto é um receptor de áudio Bluetooth.Conecte seus fones de ouvido a este produto para desfrutar de música sem fio, usando para isso seu smartphone, celular ou reprodutor de áudio equipado com Bluetooth. Ou desfrute de conversas com as mãos livres em seu smartphone ou celular por meio do microfone embutido.
Conteúdo da embalagemUnidade principal do receptor de áudio x 1 unidadeCabo de carga USB x 1Manual do usuário (com garantia) (este documento) x 1 folha
Nome das partes
Carregamento
Este produto deve ser carregado antes da utilização. Efetue o carregamento conectando o cabo USB fornecido a um PC, adaptador AC USB ou outra fonte de alimentação USB.
Conecte o cabo de carregamento USB à tomada do fone de ouvido nessa unidade.
Conecte o conector A USB do cabo de carga USB às portas USB de seu PC, etc.
Se o PC não estiver conectado a uma fonte de energia, conecte-o.
Aparelhamento (registrando-se junto ao dispositivo)
Para usar este produto com um celular ou um reprodutor de áudio, é necessário realizar o emparelhamento (registro do aparelho pela primeira vez) com o dispositivo com o dispositivo que você usar.Consulte o manual de seu dispositivo para obter informações relativas à operação do dispositivo.
A lâmpada de LED acende na cor vermelha e o carregamento inicia. A lâmpada de LED apaga quando o carregamento estiver completo.
Operação básica
Demora cerca de duas horas para carregar totalmente o produto.Se a lâmpada de LED não desligar após duas horas, desconecte o cabo de carga imediatamente e interrompa o carregamento. O carregamento por mais de duas horas pode reduzir a vida da bateria e redundar em falha do dispositivo.
Informação necessária ao conectar:Nome do dispositivo do produto quando detectado em uma pesquisa a partir de um dispositivo móvel:
Chave de link:
* É necessário uma chave de link ao se conectar usando Bluetooth 2.0 ou anterior.
Aviso importanteO cabo de carregamento USB fornecido destina-se APENAS ao uso com este produto. Não o utilize para outras finalidades além daquela de carregar este produto.
Caso queira um celular a este produto para usá-lo como um reprodutor de áudio, é necessário que o celular suporte o perfil de áudio Bluetooth (A2DP).
Se o emparelhamento não pode ser concluído em razão de problemas tais como uma configuração no dispositivo de conexão, desligue o aparelho e tente novamente.
Com a aparelho desligado, pressione o botão multifuncional e o mantenha pressionado por oito segundos ou mais até que as lâmpadas de LED comecem a piscar em vermelho e azul. Ao pressionar o botão e mantê-lo pressionado por oito segundos, a lâmpada de LED irá se comportar como mostrado a seguir:
Pisca nas cores violeta e vermelho uma vez (ao liga)
Pisca nas cores vermelho e azul (modo de emparelhamentoe)
Se os dispositivos emparelhados estiverem próximos, você pode remover o dedo do botão assim que a alimentação estiver ligada.Procure por este produto a partir do dispositivo de emparelhamento (celular, computador, etc.)
Quando este produto for localizado pelo celular ou pelo computador, o nome do dispositivo exibido na tela de pesquisa será [LBT-AR120]. Selecione e registre.
Caso apareça uma mensagem solicitando que introduza uma chave de link, insira [0000] (quatro zeros).
Dependendo do dispositivo, pode ser necessário realizar um procedimento [de conexão] depois da conclusão do emparelhamento. Consulte o manual de seu celular para obter informação e realize um procedimento [de conexão] caso necessário.
Conector série A
Conectorde carga
Ligar/desligar
Pressione o botão multifuncional nesse dispositivo e o mantenha pressionado por aprox. quatro segundos até que a lâmpada de LED pisque uma vez nas cores violeta e vermelho. Se o(s) dispositivo(s) tiver(em) uma função de conexão automática e ela estiver ativada, a reconexão ocorrerá automaticamente. Se nenhum dispositivo emparelhado puder ser encontrado, o LED pisca em vermelho.
Pressione o botão multifuncional deste produto e mantenha-o pressionado por quatro segundos ou mais. A lâmpada de LED irá piscar em vermelho e desligar, indicando que a energia está agora desligada.
Ligar
Desligar
Ouvindo músicaAjuste do volumeManuseio do botão de volume neste produto. Pressione o lado (+) para aumentar o volume e o lado (-) para baixá-lo.
Pausa/sem áudio
Avançar faixa ( ) / Retroceder faixa ( ) *
Manuseio do botão executar/pausar neste produto.Ao tocar música, pressione executar/pausar para executar ou desativar o som. Quando emparelhado com um dispositivo que suporta o perfil AVRCP, a música também sofrerá uma pausa no dispositivo conectado.
Avance e retroceda faixas neste produto com o botão de volume. Quando a música estiver sendo executada ou estiver em pausa, pressione o lado ( ) do botão para avançar para a faixa seguinte ou o lado ( ) do botão para retroceder à faixa anterior.* Dependendo do dispositivo conectado, esta função pode não funcionar do modo especificado.
Fazendo uma chamada em um celular, etc.
Este produto dispõe de um microfone na parte superior da unidade principal.
Recepção de uma chamadaSe ouvir um toque em seu fone de cabeça, pressione o botão multifuncional.
Fazendo uma chamada Para fazer uma chamada qualquer, altere a configuração de saída de som após discar o número do destinatário.
* Consulte o manual de seu celular para se informar sobre a alteração da configuração de saída de som.
Usando o iPhone 4Após a chamada, mude a configuração de saída de som para LBT-AR120 (o nome do dispositivo para este produto).Exemplo: AndroidApós chamar, pressione o botão "Bluetooth" que aparece na tela.
Desligando a chamadaDurante a ligação, pressione o botão multifuncional uma vez.
[Conexão de carregamento]
PCConecte a seu PC ou adaptador AC USB e
carregue.
Brilha na cor vermelha durante o carregamento.A lâmpada apaga quando o carregamento estiver completo.
Unidade principal
Cabo de carga USB
Seu adaptador AC USBNão fornecido com este produto
Tomada de parede AC
Para porta USB do PC
Receptor de audio Bluetoothpara conversaciones y música
Receptor de áudio Bluetoothpara música e conversaçãoReceptor de áudio Bluetoothpara música e conversação
LBT-AR120
0000(4個零)
使用時,將您的耳機插進耳機插座。
本產品不附耳機。
LBT-AR120
0000 (0이 4개)
사용할 때 이어폰을 이어폰 잭에 삽입하십시오.이 제품에는 이어폰이 포함되어 있지 않습니다.
우수한 품질의 Elecom 제품을 구매해 주셔서 감사합니다. 이 매뉴얼을 언제든 쉽게 이용할 수 있는 곳에 주의 깊게 보관하십시오.
제품 특징이 제품은 Bluetooth 오디오 수신기입니다.이 제품을 이어폰에 연결해서 Bluetooth에 대응하는 스마트폰, 휴대전화 또는 오디오 플레이어를 통해 무선으로 음악을 즐길 수 있습니다. 또는 내장된 마이크를 통해 스마트폰이나 휴대전화에서 핸즈프리로 통화를 즐길 수 있습니다.
포장 내용물오디오 수신기 주 유닛 x 1대USB 충전 케이블 x 1매뉴얼(보증서 포함)(이 문서) x 1장
부품 이름
충전
이 제품은 사용하기 전에 충전해야 합니다.포함된 USB 케이블을 PC, USB AC 어댑터 또는 다른 USB 전원 공급장치에 연결하여 충전을 수행하십시오.
포함된 USB 충전 케이블을 이 유닛의 이어폰 잭에 연결하십시오.
USB 충전 케이블의 USB A 커넥터를 PC 등의 USB 포트에 연결하십시오.
PC가 전원 공급장치에 꽂혀 있지 않으면 꽂으십시오.
페어링 (장치와 함께 등록)
이 제품을 휴대전화 또는 오디오 플레이어와 함께 사용하려면 사용하고자 하는 장치와
페어링(장치를 처음으로 등록)을 수행해야 합니다.
장치의 작동에 관한 정보는 장치 매뉴얼을 참조하십시오.
LED 램프가 적색으로 켜지고 충전이 시작됩니다. 충전이 완료되면 LED 램프가 꺼집니다.
기본 작동
이 제품을 완전히 충전하는 데는 약 2시간이 걸립니다.
2시간 후에 LED 램프가 꺼지지 않으면 즉시 충전 케이블을 분리하고 충전을 멈추십시오.2시간 이상 충전하면 배터리 수명이 단축될 수 있고 장치 고장을 초래할 수도 있습니다.
연결 시 필요한 정보휴대장치에서 검색했을 때 탐지되는 제품 장치 이름:
링크 키:
* Bluetooth 2.0 또는 이전 버전을 사용하는 장치에 연결할 때는 링크 키 입력이 필요합니다.
중요 공지 사항포함된 USB 충전기 케이블은 오직 이 제품에만 사용하기 위한 것입니다. 이 케이블을 이 제품의 충전 외에 다른 용도로 사용하지 마십시오.
오디오 플레이어로 사용하기 위해 이 제품에 휴대전화를 연결하는 경우,
휴대전화가 Bluetooth 오디오 프로파일(A2DP)을 지원해야 합니다.
연결 장치의 설정과 같은 문제로 인해 페어링을 완료할 수 없을 경우에는 전원을 한
번 껐다가 다시 시도하십시오.
전원이 꺼진 상태에서 LED 램프가 적색 및 청색으로 깜박일 때까지 다기능 버튼을
8초 이상 누릅니다.
버튼을 8초 동안 누르면 LED 램프가 다음과 같이 표시됩니다.
자주색 및 적색으로 한 번 깜박임 (전원 켜짐)
적색 및 청색으로 깜박임 (페어링 모드)
페어링된 장치가 근처에 있으면 전원이 켜지는 즉시 버튼에서 손을 뗄 수 있습니다.
페어링 장치(휴대전화, PC 등)에서 이 제품에 대한 검색을 수행하십시오.
휴대전화나 PC에서 이 제품이 확인되면 검색 화면에 장치 이름이
[LBT-AR120]으로 표시될 것입니다. 이것을 선택하고 등록하십시오.
링크 키를 입력하라는 메시지 프롬프트가 표시되면 [0000](0이 4개)을
입력합니다.
장치에 따라 페어링이 완료된 후에 [연결] 절차를 수행해야 할 수도 있습니다.
필요한 경우 휴대장치 매뉴얼에서 정보를 참조해서 [연결] 절차를 수행하십시오.
직렬 A 커넥터 충전 커넥터
전원 꺼짐
LED가 자주색 및 적색으로 한 번 깜박일 때까지 약 4초 동안 이 장치의 다기능 버튼을 누릅니다. 장치에 자동 연결 기능이 있는 경우 전원이 켜지면 자동으로 재연결됩니다. 페어링된 장치를 확인할 수 없는 경우에는 LED가 적색으로 깜박입니다.
이 제품의 다기능 버튼을 4초 이상 누르고 있습니다.LED 램프가 적색으로 깜박이고 꺼지면 이제 전원이 꺼졌다는 뜻입니다.
전원 켜기
전원 끄기
음악 청취
볼륨 조절
이 제품의 볼륨 버튼으로 수행하십시오. 볼륨을 높이려면 (+)측을 누르고 낮추려면 (-)측을 누르십시오.
일시 정지/음소거
이전 트랙 재생( )/다음 트랙 재생( )*
이 제품의 재생/일시 정지 버튼으로 수행하십시오.음악을 일시 정지하거나 음소거를 하려면 음악이 재생될 때 재생/일시 정지 버튼을 누릅니다. AVRCP 프로파일을 지원하는 장치와 페어링할 때는 연결된 장치의 음악도 일시 정지됩니다.
이 제품에서는 볼륨 버튼으로 이전 트랙 재생 및 다음 트랙 재생을 수행합니다.음악이 재생되고 있거나 일시 정지되었을 때 다음 트랙을 재생하려면 버튼의 ( )측을 누르고, 이전 트랙을 재생하려면 버튼의 ( )측을 누릅니다. * 이 기능은 연결 장치에 따라 명시된 대로 작동하지 않을 수도 있습니다.
휴대전화 등에서 전화 걸기
이 제품은 주 유닛의 상단 부분에 마이크가 있습니다.
전화 받기이어폰에서 착신벨을 듣게 되면 다기능 버튼을 누릅니다.
전화 걸기
임의로 전화를 걸 때는 수신 전화 번호를 누른 후에 사운드 출력 설정을 전환하십시오.
* 사운드 출력 설정 전환에 대한 정보는 휴대전화 매뉴얼을 참조하십시오.
iPhone 4를 사용할 때 통화 후에 사운드 출력 설정을 LBT-AR120(이 제품에 대한 장치 이름)으로 변경하십시오.예: 안드로이드전화를 건 후 화면에서 "Bluetooth" 버튼을 누릅니다.
전화 끊기
통화를 하는 중에 다기능 버튼을 한 번 누릅니다.
[충전 연결]
PC
PC 또는 USB AC 어댑터에 연결하고 충전하십시오.
충전할 때는 적색등이 켜집니다.충전이 완료되면 불이 꺼집니다.
주 유닛
USB 충전 케이블
USB AC 어댑터이 제품에 포함되어 있지 않음
AC 벽 콘센트로
PC USB 포트로
對應音樂/通話藍芽音響接收器 음악과 통화를 위한 Bluetooth오디오 수신기 음악과 통화를 위한 Bluetooth오디오 수신기