Aluminium Guide Product Catalogue Edition 1 2
Locations Phone Number Locations Phone Number
Victoria New South WalesSunshine Ph: (03) 9916 0100 Granville Ph: (02) 9681 6811
South Australia QueenslandWingfield Ph: (08) 8260 4555 Trade Coast Ph: (07) 3853 9100
Western AustraliaBibra Lake Ph: (08) 9434 1688
Locations Phone Number Locations Phone Number
Victoria New South WalesClayton South Ph: (03) 8543 3444 Granville Ph: (02) 9681 6811
South Australia QueenslandWingfield Ph: (08) 8260 4555 Eagle Farm Ph: (07) 3633 8333
Western AustraliaBibra Lake Ph: (08) 9434 1688
Locations Phone Number Locations Phone Number
Victoria/Tasmania New South WalesBallarat Ph: (03) 5320 7855 Albury Ph: (02) 6057 1700
Portland Ph: (03) 5522 4255 Cardiff Ph: (02) 4904 6400
Tasmania QueenslandHobart Ph: (03) 6211 4330 Gladstone Ph: (07) 4979 6400
Launceston Ph: (03) 6324 1250 Mt Isa Ph: (07) 4747 2833
Northgate (Export) Ph: (07) 3622 9222
Townsville Ph: (07) 4755 3939
Site Locations
BlueScope Sheet Metal Supplies
BlueScope Plate Supplies
BlueScope Distribution
BlueScope Distribution Pty Ltd - ABN 88 096 380 068
For aluminium enquiries call 1800 811 296
BlueScope Distribution operates from regional sites around Australia to offer a diverse range of steel products to industries including resources, transportation, automotive, construction, infastructure and agriculture.
www.bluescopedistribution.com.au
BlueScope Sheet Metal Supplies offers a diverse range of sheet and coil steel products, comprised of galvanised, zinc coated, aluminium zinc coated, hot rolled, cold rolled, pre painted, aluminised, COLORBOND® steel and ZINCALUME® steel.
www.sheetmetalsupplies.com.au
BlueScope Plate Supplies offers a range of steel plate products and services to a vast cross section of industries ranging from resources, transport, manufacturing, agriculture and many more. Offering quality plate processing capabilities that range from simple processing to more complex and precise requirements.
www.bluescopeplatesupplies.com.au
A4_Aluminium cover version2 .indd 2 19/05/2016 3:23 PM
Aluminium Guide Product Catalogue Edition 1 4
ContentsPRODUCT SERVICE ........................................................................................................... 7
SERVICE .............................................................................................................................. 7
GRADES AND USES ........................................................................................................... 8Alloy 6063 & 6060 ...........................................................................................................................................8
Welding ......................................................................................................................................................................................................... 8
Machining ..................................................................................................................................................................................................... 8
Common Applications ................................................................................................................................................................................... 8
Alloy 6061 .......................................................................................................................................................9
Welding ......................................................................................................................................................................................................... 9
Machining ..................................................................................................................................................................................................... 9
Common Applications ................................................................................................................................................................................... 9
Alloy 6005A ...................................................................................................................................................10
Welding ....................................................................................................................................................................................................... 10
Machining ................................................................................................................................................................................................... 10
Common Applications ................................................................................................................................................................................. 10
Alloy 6106 ..................................................................................................................................................... 11
Welding ........................................................................................................................................................................................................11
Machining ....................................................................................................................................................................................................11
Common Applications ..................................................................................................................................................................................11
Alloy 6082 ......................................................................................................................................................12
Welding ....................................................................................................................................................................................................... 12
Machining ................................................................................................................................................................................................... 12
Common Applications ................................................................................................................................................................................. 12
Alloy 5005 ......................................................................................................................................................13
Welding ....................................................................................................................................................................................................... 13
Machining ................................................................................................................................................................................................... 13
Common Applications ................................................................................................................................................................................. 13
Alloy 5052/5251 .............................................................................................................................................14
Welding ....................................................................................................................................................................................................... 14
Machining ................................................................................................................................................................................................... 14
Common Applications ................................................................................................................................................................................. 14
Aluminium Guide Product Catalogue Edition 1 5
Alloy 5083 ......................................................................................................................................................15
Welding ....................................................................................................................................................................................................... 15
Machining ................................................................................................................................................................................................... 15
Common Applications ................................................................................................................................................................................. 15
FLAT BAR .......................................................................................................................... 16
STRUCTURAL FLAT BAR ................................................................................................ 18
ANGLE ............................................................................................................................... 19
STRUCTURAL ANGLE ...................................................................................................... 20
CHANNEL .......................................................................................................................... 21
STRUCTURAL CHANNEL ................................................................................................ 22
SOLID ROUND BAR .......................................................................................................... 23
STRUCTURAL SOLID ROUND BAR ................................................................................ 24
TEE BAR ............................................................................................................................ 25
STRUCTURAL TEE BAR .................................................................................................. 26
TUBE .................................................................................................................................. 27
STRUCTURAL TUBE ........................................................................................................ 30
SQUARE HOLLOW EXTRUSIONS ................................................................................... 31
STRUCTURAL SQUARE HOLLOW EXTRUSIONS ......................................................... 33
RECTANGULAR HOLLOW EXTRUSIONS ....................................................................... 34
STRUCTURAL RECTANGULAR HOLLOW EXTRUSIONS ............................................. 36
MARINE EXTRUSIONS ..................................................................................................... 37
TRANSPORT EXTRUSIONS ............................................................................................. 42
FENCING EXTRUSIONS ................................................................................................... 56
BALUSTRADE EXTRUSIONS .......................................................................................... 59
LOUVRE EXTRUSIONS .................................................................................................... 64
SIGNAGE EXTRUSIONS ................................................................................................... 69
Aluminium Guide Product Catalogue Edition 1 6
COOLROOM EXTRUSIONS .............................................................................................. 73
SHEET 5005 H34 ............................................................................................................... 77
SHEET 5052 / 5251 H32 .................................................................................................... 79
SHEET 5052 / 5251 H38 .................................................................................................... 80
SHEET & PLATE 5083 DNV H116 ................................................................................... 81
TREADPLATE 5BAR ......................................................................................................... 83
PAINTED SHEET & COIL .................................................................................................. 84
Aluminium Guide Product Catalogue Edition 1 7
Product ServiceOur BlueScope businesses (BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution) offer a comprehensive range of Aluminium products throughout Australia. We service a broad range of industries such as Transport, Marine, Automotive, General Engineering and Fabrication.
Aluminium is easy to fabricate, it is corrosion resistant and resilient and has an excellent strength to weight ratio.Our product range includes standard Aluminium products, geometric and customer exclusive extrusions, sheet and coil products, tread plate and plate in a range of alloys and tempers. Painted sheet and coil products are also available. Painted aluminium, backed up by BlueScope COLORBOND® steel painting technology, is the ultimate solution for challenging building environments. They are also used for other applications like wine tanks, air condition panels and caravan panels. In addition to the full range of COLORBOND® steel colours, we also offer custom colour matching for aluminium. Please visit www.colorbond.com to see the full range of colours.
All aluminium products are supplied in accordance with AS/NZS 1866:1997.
Extruded Aluminium Products
Rolled Aluminium Products
Aluminium has many advantages. It is lightweight and strong. It is formable, corrosion resistant, readily available and 95% recyclable.
Aluminium is used in many industries, some of which include:
Marine
Automotive and Transport
Building and Architectural
Engineering
A wide variety of pre-production processing capabilities are available to enhance our customer’s productivity and profitability even before the orders are delivered. Processing options available include:
Router cutting
Laser cutting
Marking
Sheet Guillotining
CNC Router Cutting to size and shape. Cutting is computer controlled and the components are nested on an integrated CAD/CAM programming system for maximum material utilisation.
ServiceOur BlueScope Businesses (BlueScope Plate Supplies, Bluescope Sheet Metal Supplies and BlueScope Distribution) offer a range of services and facilities to assist our customers to maximise their profitability and market position. We ensure that what you need is available when you need it - lessening the impact of storage and bank charges and unnecessary labour costs.
Delivery and cycle times can be customised to suit individual customer needs. By including us in your project management team you can maximise the benefits derived from coordinated processing and delivery schedules that suit your project.
Aluminium Guide Product Catalogue Edition 1 8
Grades and UsesAlloy 6063 & 6060This alloy is commonly used for the production of flats, angles, channels, hollows both circular and square as well as other standard aluminium suits. Its properties also lend itself to producing intricate custom design sections. They have good mechanical properties and responds well to surface treatments that enhance the aesthetics of the surface. 6063/ 6060 has excellent corrosion resistance due to the very low percentage of magnesium in its chemical composition. It responds well to Anodising and further enhances its corrosion resistance.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
6063 0.2-0.6 0.35 0.1 0.1 0.45-0.9 0.1 0.1 0.1 0.05 0.15
6060 0.3-0.6 0.1-0.3 0.1 0.1 0.35-0.6 0.05 0.15 0.1 0.05 0.15
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
6063 - T5 12 150 110 8
12 25 145 105 6
6063 -T52 12 150 205 110 8
6063 - T6 25 205 170 8
25 150 185 160 10
6060 - T5 12 150 110 8
12 25 145 105 6
6063 -T52 12 150 205 110 8
WELDINGThese alloys responds very well to all common forms of welding but for structural welds it often recommended that GTAW and GMAW methods are used.
MACHININGAlloys 6063/6060 have average machinability and therefore other alloys are generally substituted where a high level of machining is required.
COMMON APPLICATIONSVarious Architectural profile such as balustrading and window frames. 6063 & 6060 are used in many different applications due to its versatility.
Aluminium Guide Product Catalogue Edition 1 9
Alloy 6061 This alloy is a heat treatable medium to high strength alloy that has very good properties when it comes to corrosion and weldability. It is less likely to fatigue than some high strengths alloys such as 6082 and also has some formability in T6. This alloy is a good compromise between commercial architectural alloys and super high strength alloys.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15
6005A 0.5-0.9 0.35 0.3 0.5 0.4-0.7 0.3 0.2 0.1 0.05 0.15
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
6061 - T6 All Thicknesses 260 240 8
6005A- T5 All Thicknesses 260 240 8
WELDINGThis alloy has a good weldability rating across all common types of welding process which in turn make it great for fabrication application.
MACHININGAlloy 6061 has average machinability and therefore other alloys are generally substituted where a high level of machining is required.
COMMON APPLICATIONS6061 is commonly used in the transport market where high strength is required but also medium fatigue strength. You will find this alloy in truck frames, bull bars & marine structures.
Aluminium Guide Product Catalogue Edition 1 10
Alloy 6005AThis alloy is considered a structural alloy but of the 3 common structural alloys 6005A has the best extrusion characteristics. It achieves a very good extruded surface finish and is able to be extruded into thin-walled intricate shapes.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15
6005A 0.5-0.9 0.35 0.3 0.5 0.4-0.7 0.3 0.2 0.1 0.05 0.15
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
6061 - T6 All Thicknesses 260 240 8
6005A- T5 All Thicknesses 260 240 8
WELDINGThis alloy has an excellent rating across all common types of welding process which in turn make it great for fabrication application.
MACHININGAlloy 6005A has average machinability and therefore other alloys are generally substituted where a high level of machining is required.
COMMON APPLICATIONSDue to its surface finish properties and ability to be extruded into intricate shapes this alloy is commonly used in structural architectural products and other products requiring strength but visually appealing surface finishes.
Aluminium Guide Product Catalogue Edition 1 11
Alloy 6106 This alloy is a heat treatable medium to high strength alloy that has very good properties when it comes to surface finish, extrudability, corrosion and weldability. It is less likely to fatigue than some high strengths alloys such as 6082 and also has some formability in T6. This alloy is an all-rounder as its strength and formability can be adjust through different tempering, it is a good compromise between commercial architectural alloys and super high strength alloys.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
6106 0.3-0.6 0.35 0.25 0.05-0.2 0.4-0.8 0.2 0.1 0 0.05 0.1
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
6106-T6 10 235 210 8
10 25 205 170 8
25 150 185 160 10
WELDINGThis alloy has a good weldability rating across all common types of welding process which in turn make it great for fabrication application.
MACHININGAlloy 6106 has good machinability and therefore it can be machined into basic products.
COMMON APPLICATIONS6106 is commonly used for structural applications where the product has some intricacy or requires some degree forming and welding all while maintaining a good surface finish. You will often see this alloy used in Ladders, Pylons, Marine and Automotive structures.
Aluminium Guide Product Catalogue Edition 1 12
Alloy 6082Alloy 6082 is a high strength alloy with excellent corrosion resistance. This structural alloy is commonly used for machining when in plate form. This newer alloy is replacing 6061 in many applications. It has a very high level of manganese and this gives a great control over the grain structure which in turn creates a very strong alloy.
Its extrudability is limited though when compare to some other structural 6000 series alloys and it tends not to have a great surface finish compared to some 6000 series alloys.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
6082 0.7-1.3 0.5 0.1 0.4-1.0 0.6-1.2 0.25 0.2 0.1 0.05 0.15
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
6082-T5 6 270 230 8
6082-T6 20 295 255 7
20 150 310 270 7
150 200 280 240 5
WELDINGThis alloy has a good weldability rating across all common types of welding process which in turn make it great for fabrication application.
MACHININGAlloy 6082 has good machinability and therefore it can be machined into basic products.
COMMON APPLICATIONS6082 is used predominantly in the marine and road transport market due to its very high strength. It is also seen in civil structures and is starting to become prevalent in many other structural applications. Common products include boats, truck bodies, automotive components, food production equipment and bridges and trusses.
Aluminium Guide Product Catalogue Edition 1 13
Alloy 5005This rolled (sheet or coil) alloy is softest of the 5000 series alloys due to its comparatively low levels of magnesium. This does however make this alloy very suitable for forming and welding. It has excellent corrosion properties and due to its low levels of magnesium it doesn’t suffer from stress corrosion like Alloy 5083.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
5005 0.3 0.7 0.2 0.2 0.5-1.1 0.1 0.25 0 0.05 0.15
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
5005-H34 0.8 6 135 180 105 4-7
WELDINGThis alloy has an excellent weldability rating across all common types of welding process which in turn make it great for fabrication application.
MACHININGAlloy 5005 has poor machinability and therefore it often substituted when machining is required.
COMMON APPLICATIONS5005 is used for most general fabrication requirements where the product is to be constructed from sheet or coil. It is very versatile and is used in products such as signs, architectural flashings and transport products.
Aluminium Guide Product Catalogue Edition 1 14
Alloy 5052/5251Rolled (sheet or coil) alloys 5052 and 5251 are stronger than 5005 and is used in applications that require more structural integrity or more impact resistance.it is still suitable for forming and welding. It is now common place in Australia and New Zealand to interchange 5052 and 5251 as the mechanical properties are almost identical. They have excellent corrosion properties and due to their low levels of magnesium they don’t suffer from stress corrosion like Alloy 5083.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 0.1 0 0.05 0.15
5251 0.4 0.5 0.15 0.1-0.5 1.7-2.4 0.15 0.15 0.15 0.05 0.15
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
5052-H32 0.5 50 215 180 105 4-7
5052-H38 0.8 3.25 270 220 4
5251-H32 0.5 50 200 255 130 5-10
5251-H34 0.5 25 230 275 180 4-8
WELDINGThese alloys have an excellent weldability rating across all common types of welding process which in turn make it great for fabrication application.
MACHININGAlloys 5052 and 5251 have poor machinability and therefore it often substituted when machining is required.
COMMON APPLICATIONS5052 and 5251 are used for most general fabrication requirements where the product is to be constructed from sheet or coil. It is very versatile and is used in products such as signs, architectural flashings, marine and transport, furniture and food processing products.
Aluminium Guide Product Catalogue Edition 1 15
Alloy 5083This alloy is a very high strength alloy and is heavily utilized in the aluminium ship building industry in plate form. This alloy is predominantly supplied pre-certified by a third party inspection company. It has excellent corrosion resistance but because it has magnesium content higher than 3.5% it can be susceptible to stress corrosion cracking.
COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy Si Fe Cu Mn Mg Cr Zn TiOther
Each Total
5083 0.4 0.4 0.1 0.4-1.0 4.0-4.9 0.05-0.25 0.25 0.15 0.05 0.15
MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED
Alloy and Temper
Thickness mm Tensile Strength (Mpa) Elongation (% min in
50mm)Over Up toUltimate Yield
Min Max Min Max
5083-H116 3 30 305 215 10
5083-H321 5 40 305 385 215 295 10
40 75 280 385 200 295 10
WELDINGThese alloys have an excellent weldability rating across all common types of welding process which in turn make it great for fabrication application.
MACHININGAlloy 5083 has poor machinability and therefore it often substituted when machining is required.
COMMON APPLICATIONSApplications for this product generally restricted to structural products requiring high levels of structural integrity. These products include pressure vessels, ships, rail cars, truck bodies, other road transport vehicles and civil structural applications.
Aluminium Guide Product Catalogue Edition 1 16
Flat Bar
Material No.Width (mm)
Thickness (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
134643 10 3.0 4000 0.32 6060 T5
148106 20 1.6 4000 0.35 6060 T5
148106 20 3.0 4000 0.65 6060 T5
148106 20 6.0 4300 1.40 6063 T4
148106 25 3.0 4000 0.81 6060 T5
148106 25 5.0 4000 1.36 6060 T5
148106 25 6.0 4000 1.62 6060 T5
148106 25 10.0 4000 2.71 6060 T5
148106 32 3.0 4000 1.04 6060 T5
148106 32 6.0 4000 2.08 6060 T5
148106 40 3.0 4000 1.30 6060 T5
148106 40 4.0 4000 1.74 6060 T5
148106 40 6.0 4000 2.60 6060 T5
148106 40 10.0 4000 4.33 6060 T5
148106 50 3.0 4000 1.62 6060 T5
148106 50 4.0 4000 3.25 6060 T5
148106 50 5.0 4000 2.71 6060 T5
148106 50 6.0 4000 4.86 6060 T5
148106 50 8.0 4000 4.34 6060 T5
148106 50 10.0 4000 5.42 6060 T5
148106 50 12.0 4000 6.48 6060 T5
148106 50 12.0 5000 8.10 6060 T5
148106 60 6.0 4000 3.89 6060 T5
148106 60 6.0 4000 3.89 6060 T591
148106 60 10.0 4000 6.50 6060 T5
148106 80 3.0 4000 2.59 6060 T5
148106 80 3.0 5000 3.24 6060 T5
148106 80 6.0 4000 5.20 6060 T5
148106 80 10.0 4000 8.66 6060 T5
148106 80 12.0 4000 10.41 6060 T5
R W
T
Aluminium Guide Product Catalogue Edition 1 17
Material No.Width (mm)
Thickness (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
148106 100 3.0 4000 3.25 6060 T5
148106 100 6.0 4000 6.50 6060 T5
148106 100 10.0 4000 10.83 6060 T5
148106 100 12.0 4000 13.01 6060 T5
148106 160 6.0 4000 10.37 6060 T5
148106 160 10.0 4000 17.33 6060 T5
148106 160 12.0 4000 20.81 6060 T5
Flat Bar (continued)
R W
T
Aluminium Guide Product Catalogue Edition 1 18
Material No.Width (mm)
Thickness (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
158785 40 5.0 6000 3.33 6082 T6
134668 40 6.0 6000 3.90 6082 T6
211017 50 3.0 6000 2.44 6082 T6
196031 50 4.0 6000 3.25 6082 T6
209423 50 6.0 5900 4.79 6082 T6
141654 50 6.0 6000 4.87 6082 T6
173830 50 10.0 6000 8.13 6082 T6
158809 60 6.0 6000 5.83 6082 T6
199256 60 12.0 6000 11.71 6082 T6
141668 80 6.0 6000 7.80 6082 T6
158824 80 8.0 6000 10.40 6082 T6
199069 80 10.0 6000 12.99 6082 T6
142219 100 6.0 6000 10.00 6082 T6
158832 100 6.0 6000 10.00 6061 T6
168281 100 10.0 6000 16.25 6082 T6
212241 100 12.0 3000 9.76 6005A T5
205927 160 10.0 6000 26.20 6005A T5
148134 160 10.0 4000 17.47 6082 T6
Structural Flat BarR W
T
Aluminium Guide Product Catalogue Edition 1 19
Angle
Material No.
Height (mm)
Width (mm)
Thickness (mm)
R2Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
134516 20 12 1.6 6000 0.79 6060 T5
134517 20 12 1.6 6500 0.86 6060 T5
147967 20 20 1.6 6000 0.99 6060 T5
134519 20 20 1.6 6500 1.07 6060 T5
134523 20 20 3.0 6500 1.95 6060 T5
141593 25 20 1.6 6500 1.24 6060 T5
134525 25 25 1.6 6500 1.35 6060 T5
125995 25 25 3.0 6500 2.47 6060 T5
154037 32 20 1.6 6500 1.40 6060 T5
170644 32 32 1.6 6500 1.65 6060 T5
134537 32 32 3.0 6500 3.22 6060 T5
134539 40 20 1.6 6500 1.55 6060 T5
154041 40 20 3.0 6500 3.01 6060 T5
134545 40 25 3.0 6500 3.26 6060 T5
134549 40 40 1.5 6500 2.07 6060 T5
134549 40 40 1.6 6500 2.20 6060 T5
134553 40 40 3.0 6500 4.06 6060 T5
134555 40 40 4.0 6500 5.47 6060 T5
134557 40 40 6.0 6500 7.79 6060 T5
134559 50 25 1.6 6500 2.07 6060 T5
134563 50 25 3.0 6500 3.80 6060 T5
158725 50 50 1.6 6500 2.76 6060 T5
209420 50 50 3.0 5900 4.64 6060 T5
132715 50 50 3.0 6500 5.11 6060 T5
134569 50 50 4.0 6500 6.77 6060 T5
134571 50 50 6.0 6500 9.90 6060 T5
141604 75 25 3.0 6500 5.13 6060 T5
134585 80 40 6.0 6000 11.12 6060 T4
148025 80 80 6.0 6000 15.02 6060 T5
T
T
B
A
R2 R3
R4R1
Aluminium Guide Product Catalogue Edition 1 20
Structural Angle
Material No.
Height (mm)
Width (mm)
Thickness (mm)
R2Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
224953 50 50 4.0 2.5 6000 6.26 6005a T5
209421 50 50 6.0 5900 8.98 6082 T6
205317 50 50 6.0 6500 9.93 6082 T6
141600 50 50 6.0 4.0 6500 10.00 6082 T5
142213 60 60 6.0 4.0 6500 12.05 6082 T6
208455 76.2 50.8 6.4 5500 11.59 6061 T6
142214 80 50 6.0 4.0 6500 13.16 6082 T6
148027 80 80 6.0 4.0 6000 15.40 6061 T6
142215 80 80 6.0 4.0 6500 16.33 6082 T6
154059 80 80 10.0 6.0 6000 25.02 6005a T5
169817 80 80 10.0 6.0 6500 27.11 6005a T5
141612 80 80 10.0 6.0 6500 27.11 6082 T6
148029 100 50 6.0 4.0 6000 15.28 6061 T6
141614 100 50 6.0 4.0 6500 15.28 6082 T6
141616 100 80 10.0 6500 29.95 6082 T6
198199 125 80 8.0 6.0 6000 25.66 6082 T5
T
T
B
A
R2 R3
R4R1
Aluminium Guide Product Catalogue Edition 1 21
Channel R3R4
R2
R1
C
A
B
T1
T2
Material No.
Height (mm)
Width (mm)
T1 (mm)
T2 (mm)
RadiusLength (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
227050 20 16 1.6 1.6 6000 1.27 6060 T5
154068 20 20 1.6 1.6 6500 1.60 6060 T5
148053 25 25 1.6 1.6 6000 1.91 6063 T5
134605 25 25 3.0 3.0 6500 3.65 6060 T5
147374 40 20 3.0 3.0 6500 3.91 6060 T5
134610 40 25 3.0 3.0 6500 4.43 6060 T5
153198 41.5 22.5 3.0 3.0 3 6500 4.25 6060 T5
134616 50 25 3.0 3.0 6500 4.95 6060 T5
230205 53 25 1.2 1.2 7250 2.36 6060 T5
177216 53 25 1.6 1.6 6000 2.59 6060 T5
147375 60 32 3.0 3.0 6500 6.39 6060 T5
147873 100 50 3.0 3.0 6500 10.21 6060 T5
Aluminium Guide Product Catalogue Edition 1 22
Structural Channel
Material No.
Height (mm)
Width (mm)
T1 (mm)
T2 (mm)
RadiusLength (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
215003 76.2 38.1 6.4 7.9 7.62 5500 15.07 6061 T6
224948 80 40 4.0 6000 9.89 6082 T6
209422 80 40 6.0 6.0 4 5900 14.31 6061 T6
142216 80 40 6.0 6.0 4 6500 15.70 6082 T6
212431 88 130 6.0 6.0 6 5900 32.05 6351 T6
172354 100 50 3.0 3.0 6000 15.57 6005a T5
216106 100 50 9.0 6.0 6 6500 26.70 6082 T6
142217 100 50 9.0 9.0 6 6500 26.70 6082 T6
210846 100 180 6.0 6.0 6900 6351 T6
227029 101.6 63.5 6.0 6.0 6500 6351 T6
134628 101.6 50.8 7.9 6.3 9.14 5500 20.65 6061 T6
224949 101.6 50.8 7.9 6.4 9.14 6000 22.53 6082 T6
199981 127 50.8 4.0 4.0 6 6500 15.81 6082 T6
204426 127 63.5 9.5 6.4 6500 28.98 6082 T6
148080 127 63.5 9.0 6.4 10.67 6500 34.25 6005a T5
204806 152.4 63.5 6.4 7.9 10.65 9000 36.42 6082 T6
158440 152.4 63.5 7.9 6.3 10.67 7000 36.46 6082 T6
224950 152.4 63.5 7.9 6.4 10.67 6000 31.25 6082 T6
200442 152.4 76.2 9.5 9.5 6000 6005a T5
141637 180 80 11.0 11.0 6 6500 47.97 6082 T6
148089 200 90 10.0 8.0 12.5 5400 46.56 6005a T5
204843 200 90 10.0 8.0 12.5 8000 68.98 6082 T6
148090 200 90 10.0 8.0 12.5 6100 52.60 6082 T6
158761 200 90 10.0 8.0 12.5 7000 60.36 6106 T6
203882 250 110 12.0 12.0 7 4000 56.54 6106 T6
175179 250 110 12.0 12.0 7 2500 35.34 6106 T6
212769 254 115 12.5 12.4 18.5 2480 37.65 6005a T5
187153 381 152.4 12.7 12.7 15.9 2500 6005a T5
175178 381 152.4 12.7 12.7 15.9 2700 6106 T6
158770 381 152.4 12.7 12.7 15.9 3000 6106 T6
R3R4
R2
R1
C
A
B
T1
T2
Aluminium Guide Product Catalogue Edition 1 23
Solid Round Bar
Material No.Diameter
(mm)Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
215055 8 6000 0.82 6060 T5
133017 10 4000 0.85 6060 T5
134915 12 4000 1.22 6060 T5
142227 12 6000 1.83 6060 T6
134919 16 4000 2.17 6060 T5
141752 16 6000 3.26 6060 T5
133018 20 4000 3.40 6060 T5
134930 25.4 4000 5.48 6060 T5
DIA
Aluminium Guide Product Catalogue Edition 1 24
Structural Solid Round Bar
Material No.Diameter
(mm)Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
141753 20 6500 5.53 6082 T6
198962 50 4000 21.28 6061 T6
148269 50 4000 21.28 6061 T6
DIA
Aluminium Guide Product Catalogue Edition 1 25
Tee Bar
Material No.
A (mm)
B (mm)
T1 (mm)
T2 (mm)
R (mm)
Length (mm)
Mass per length
(kg)
Alloy and
temperWA SA VIC NSW QLD
159010 25.4 38.1 1.6 1.6 4800 1.29 6060 T5
134983 40 40 3 3 6500 4.07 6060 T5
T1
B
A
T2
R
Aluminium Guide Product Catalogue Edition 1 26
Structural Tee Bar
Material No.
A (mm)
B (mm)
T1 (mm)
T2 (mm)
R (mm)
Length (mm)
Mass per length
(kg)
Alloy and temper
WA SA VIC NSW QLD
201499 40 40 4 4 3 6500 5.43 6005A T5
159019 40 40 4 4 3 6500 5.43 6082 T6
200962 50 50 4 4 6100 6.35 6082 T6
142228 50 50 6 6 6500 9.93 6082 T6
223061 50 65 5 6500 9.66 6082 T5
T1
B
A
T2
R
Aluminium Guide Product Catalogue Edition 1 27
Tube
Material No.
Diameter (mm)
Wall thick (mm)
Nominal ID (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
158251 16 1.20 13.60 6500 0.98 6060 T6
140832 16 1.60 12.80 6000 1.17 6060 T5
135127 16 1.60 12.80 6500 1.27 6060 T5
212296 19 1.20 16.60 6500 1.17 6060 T5
148767 19 3.20 12.60 6500 2.86 6060 T5
207184 19.05 1.65 15.75 6500 1.58 6060 T5
135142 20 1.60 16.80 6500 1.61 6060 T5
135152 25 1.20 22.60 6000 1.46 6060 T591
135155 25 1.60 21.80 6500 2.07 6060 T5
230599 25 3.00 19.00 5900 3.29 6060 T52
135161 25 3.00 19.00 6500 3.63 6060 T5
209424 25 3.00 19.00 5900 3.29 6060 T595
142236 32 1.60 28.80 6500 2.68 6060 T5
180751 32 3.00 26.00 6500 4.79 6060 T595
148780 32 3.00 26.00 6000 4.42 6060 T5
135186 32 3.00 26.00 6500 4.79 6060 T5
141932 38.1 3.20 31.70 6000 5.84 6063 T1
209426 38.1 3.20 31.70 5900 5.74 6060 T52
159433 38 4.50 29.00 5500 7.06 6060 T591
135190 40 1.60 36.80 6500 3.40 6060 T5
230607 40 3.00 34.00 5500 5.18 6060 T52
135196 40 3.00 34.00 6500 6.12 6060 T5
180753 40 3.00 34.00 5500 5.18 6060 T595
141936 44.5 3.20 38.10 6000 6.92 6063 T591
159442 44.5 3.20 38.10 5500 6.34 6063 T52
159444 48 3.00 42.00 5500 6.47 6060 T52
230608 48 3.00 42.00 5500 6.47 6060 T52
159448 48.4 4.50 39.40 5500 9.47 6060 T52
141941 48.4 4.70 39.00 6500 11.37 6063 T591
148802 50 3.00 44.00 6500 7.79 6060 T5
A
BT
Aluminium Guide Product Catalogue Edition 1 28
Material No.
Diameter (mm)
Wall thick (mm)
Nominal ID (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
201785 50 3.00 44.00 6500 7.79 6060 T595
141945 50 3.00 44.00 6000 7.19 6063 T1
142238 50 3.00 44.00 6500 7.79 6063 T1
135211 50 4.00 42.00 6500 10.42 6060 T1
180755 50 4.00 42.00 5500 8.82 6060 T52
214834 50 4.00 42.00 6000 9.62 6060 T591
141950 50 4.00 42.00 6500 10.42 6060 T591
206051 60 2.00 56.00 6000 5.93 6063 T1
141960 60 2.00 56.00 6500 6.42 6063 T591
180756 60 3.00 54.00 6500 9.45 6060 T595
135221 60 3.00 54.00 6500 9.45 6063 T5
141964 60 5.00 50.00 6500 15.22 6063 T591
159457 60 6.00 48.00 6500 18.36 6060 T1
141968 63.5 3.20 57.10 6000 9.86 6063 T1
229977 63.5 3.95 55.60 6000 12.02 6060 T4
193050 63.5 4.75 54.00 6000 7.13 6063 T1
159466 76.2 2.60 71.00 6500 10.74 6060 T591
141977 76.2 3.20 69.80 6500 9.70 6063 T1
206268 76.2 4.70 66.80 6500 18.60 6060 T4
141980 76.2 4.70 66.80 6000 17.17 6063 T1
209427 76 6.00 64.00 5900 48.83 6060 T1
159462 76 6.00 64.00 6500 53.80 6060 T1
135247 80 3.00 74.00 6500 12.74 6060 T595
208773 88.9 6.35 76.20 6600 29.45 6060 T4
187064 100 3.00 94.00 6500 16.04 6060 T4
230613 100 3.00 94.00 6500 16.04 6060 T52
141989 100 3.00 94.00 6500 16.04 6060 T5
180757 100 3.00 94.00 6500 16.04 6060 T595
159473 100 6.00 88.00 6000 29.52 6060 T5
180758 203.2 3.00 197.20 4200 22.01 6060 T5
Tube (continued)
A
BT
Aluminium Guide Product Catalogue Edition 1 29
Material No.
Diameter (mm)
Wall thick (mm)
Nominal ID (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
148879 203.2 3.00 197.20 6500 34.06 6060 T5
Tube (continued)
A
BT
Aluminium Guide Product Catalogue Edition 1 30
Material No.
Diameter (mm)
Wall thick (mm)
Nominal ID (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
148793 48.4 4.47 39.46 6000 10.03 6061 T6 (SCAF)
141939 48.4 4.47 39.46 6100 10.20 6061 T6 (SCAF)
141953 50.0 4.00 42.00 6500 10.18 6106 T6
141955 50.0 5.00 40.00 6600 12.65 6106 T6
215053 50.0 6.00 38.00 6000 13.48 6082 T5
168839 50.0 6.00 38.00 6000 13.48 6106 T6
142239 63.5 6.30 50.90 6000 18.86 6082 T6
141982 76.2 6.35 63.50 6000 23.22 6082 T6
159468 76.2 6.35 63.50 6000 23.22 6082 T6
147390 88.9 6.35 76.20 5500 25.15 6082 T6
141933 101.6 6.35 88.90 6500 34.30 6082 T6
141955 114.3 6.40 101.50 6500 39.16 6082 T6
Structural Tube
A
BT
Aluminium Guide Product Catalogue Edition 1 31
Material No.
A and B (mm)
T (mm)
R1 (mm)
R2 (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
202177 12 1.6 6500 1.22 6060 T5
159491 20 1.2 6000 1.49 6060 T5
154068 20 1.6 6500 2.07 6060 T5
205475 20 2.0 3.00 6500 2.88 6060 T5
170226 20 3.0 3.00 6500 3.46 6060 T5
142007 20 3.0 3.00 0.50 6500 3.46 6063 T5
135271 25 1.6 6500 2.69 6060 T5
142009 25 1.5 2.50 1.00 6500 2.41 6060 T5
174939 25 2.0 1.60 0.50 6000 2.96 6060 T5
135273 25 3.0 6500 4.65 6060 T5
209428 25 3.0 3.00 3.00 5900 4.22 6060 T5
142013 25 3.0 3.00 3.00 6000 4.29 6060 T5
148895 25 3.0 3.00 3.00 6500 4.63 6060 T5
142014 25 3.0 3.00 3.00 6500 4.63 6060 T591
135277 25.4 3.3 3.18 3.18 7000 5.46 6060 T5
140219 32 2.0 6500 4.23 6060 T5
135279 32 3.0 6500 6.11 6060 T5
142033 40 1.6 6500 4.33 6060 T5
142035 40 2.0 6500 5.36 6060 T5
173924 40 2.0 3.00 1.00 6500 5.23 6060 T5
209431 40 3.0 5900 7.10 6060 T5
135287 40 3.0 6500 7.80 6060 T5
171378 40 3.0 3.00 0.50 6500 7.69 6060 T5
188175 50 1.6 6.00 4.40 6500 5.21 6060 T5
135291 50 2.0 6500 6.79 6060 T5
175606 50 2.0 6.00 4.00 6500 6.46 6063 T6
135293 50 2.5 6500 8.34 6060 T5
148911 50 3.0 6000 9.17 6060 T5
154900 50 3.0 6500 9.93 6060 T5
135297 50.8 2.0 6.00 6500 6.57 6060 T5
Square Hollow Extrusions
A
T
R1
R2
B
Aluminium Guide Product Catalogue Edition 1 32
Material No.
A and B (mm)
T (mm)
R1 (mm)
R2 (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
148912 50.8 3.2 4.75 1.55 6000 9.76 6060 T5
135299 50.8 3.2 4.75 1.55 6500 10.57 6060 T5
229863 65 2.5 6500 11.01 6060 T5
229865 90 2.2 3.00 6500 13.35 6060 T5
230822 100 3.0 5000 16.09 6060 T5
230692 100 3.0 6000 19.31 6060 T5
142273 100 3.2 6.35 6.35 6500 21.37 6060 T5
Square Hollow Extrusions (continued)
A
T
R1
R2
B
Aluminium Guide Product Catalogue Edition 1 33
Material No.
A and B (mm)
T (mm)
R1 (mm)
R2 (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
212668 50 3.0 6.00 3.00 6500 9.53 6082 T6
201437 50 4.0 6.00 2.00 6500 12.48 6005 T5
206864 50 5.0 6.00 1.00 6500 15.32 6005 T5
224951 50.8 3.2 4.75 1.55 6000 9.62 6082 T6
142253 50.8 3.2 4.78 1.55 6000 9.52 6106 T6
158177 65 3.0 5.00 5.00 6500 13.09 6082 T6
213563 76 6.2 16.00 9.80 6500 28.07 6082 T6
230026 76.2 3.0 6.25 3.25 6000 13.89 6082 T5
198142 76.2 3.0 6.25 3.25 12000 27.77 6082 T5
147486 76.2 6.4 15.90 9.55 6500 23.22 6082 T6
214747 100 6.0 12.00 6.00 6000 61.56 6082 T6
171386 100 6 12.00 6.00 6500 66.69 6005a T5
214791 100 6 12.00 6.00 6500 66.69 6061 T6
191652 100 6 12.00 6.00 14000 82.08 6082 T6
Structural Square Hollow Extrusions A
T
R1
R2
B
Aluminium Guide Product Catalogue Edition 1 34
Rectangular Hollow Extrusions
Material No.
A (mm)
B (mm)
T (mm)
R1 (mm)
R2 (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
175604 38 25 1.5 3.00 1.50 6100 2.95 6060 T5
170695 38 25 2.0 3.00 1.60 6500 4.06 6060 T5
209429 38 25 2.5 3.00 5900 4.54 6060 T5
212003 40 20 2.0 2.00 5400 3.23 6060 T5
135285 40 25 2.5 6500 5.29 6060 T5
229997 40 25 3.0 6500 6.24 6060 T5
193926 50 25 1.6 6500 4.05 6060 T5
209432 50 25 3.0 5900 6.76 6060 T5
210284 50 25 3.0 3.00 6500 7.13 6060 T5
135289 50 25 3.0 6500 7.29 6060 T5
187553 50.8 25.4 2.5 1.40 6500 6.24 6060 T5
142243 50 40 3.0 6500 9.07 6060 T5
135301 60 40 3.0 6500 9.93 6060 T5
206687 60 40 4.0 6500 12.97 6060 T5
229872 65 16 1.2 3.00 1.60 6500 3.24 6060 T5
199648 65 16 1.4 6000 3.54 6060 T5
168836 65 16 1.4 3.00 1.60 6000 3.54 6060 T5
182473 65 16 1.4 3.00 1.60 6500 3.84 6063 T5
135311 76.2 25.4 2.4 6000 7.64 6060 T5
142263 76.2 25.4 2.4 6500 8.28 6060 T5
135313 76.2 50.8 3.2 6500 13.78 6060 T5
222919 80 25 3.0 6500 10.33 6060 T5
135317 80 40 3.0 6500 12.01 6060 T5
133517 80 50 3.0 6500 13.10 6060 T5
135320 100 25 2.5 6500 10.53 6060 T5
209433 100 50 3.0 5900 13.76 6060 T5
135324 100 50 3.0 6500 15.16 6060 T5
223058 100 50 3.0 6500 15.16 6060 T591
181287 100 50 3.0 6.00 6500 14.76 6060 T5
A
B
T2
R2
R1
T1
Aluminium Guide Product Catalogue Edition 1 35
Material No.
A (mm)
B (mm)
T (mm)
R1 (mm)
R2 (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
135331 150 50 3.0 6500 20.43 6060 T5
159509 152.4 76.2 6.4 1.60 0.25 6000 44.38 6060 T595
230821 200 50 3.0 4000 15.87 6060 T5
230820 200 50 3.0 5000 19.84 6060 T5
230819 200 50 3.0 6000 23.80 6060 T5
230711 200 50 3.0 7000 27.77 6060 T5
Rectangular Hollow Extrusions (continued)
A
B
T2
R2
R1
T1
Aluminium Guide Product Catalogue Edition 1 36
Structural Rectangular Hollow Extrusions
Material No.
A (mm)
B (mm)
T (mm)
R1 (mm)
R2 (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
203814 40 20 3 5000 4.38 6005a T5
195520 75 50 4 2.00 2.00 7500 18.61 6005a T5
142269 100 50 3 6.00 3.00 6500 15.54 6082 T6
216107 100 50 6 8.00 2.00 6500 28.26 6082 T6
142271 100 50 6 8.00 2.00 7500 33.32 6082 T6
224952 100 60 4 4.00 4.00 6000 19.77 6082 T6
172957 101.6 76.2 2.3 5.48 3.18 11800 24.73 6082 T6
201027 150 100 6 6.00 6.00 6500 50.31 6082 T5
147395 152 76 6 6.00 2.00 6500 49.21 6082 T6
223062 200 50 3 6.00 3.00 6500 25.79 6061 T5
A
B
T2
R2
R1
T1
Aluminium Guide Product Catalogue Edition 1 37
Marine Extrusions
Material No.
Section (mm)
Dimensions (H x W) (mm)
Length (mm)
Mass per length
(kg)
Alloy and temper
WA SA VIC NSW QLD
147901 Windscreen mould 19.06 x 11.28 5000 1.370 6060 T1
147901 Windscreen mould 19.06 x 11.28 6500 1.780 6060 T1
216266 4.2mm Chine 22 x 31 6000 5.178 6063 T5
157828 3.2mm Keel 35 x 27.26 4400 5.500 6063 T5
212852 3.2mm Gunwhale 43 x 54 5000 7.200 6063 T5
230227 3.2mm Chine 35 x 22 4500 4.469 6063 T5
210283 50mm Half Round 30 x 50 6500 5.076 6005A T5
202366 50mm Coaming - Facia 16 x 50 6500 3.800 6063 T591
190776 76.2 mm Bulb Bar 19 x 76.2 6000 8.508 6082 T6
190777 98.7 mm Bulb Bar 19.05 x 98.7 6000 10.530 6082 T6
189653 50 mm Bulb Bar 14 x 50 6000 4.692 6082 T6
141731 39mm Half Round 24.5 x 39 6500 3.803 6005A T5
230230 5.2mm Keel 45 x 40 6200 14.421 6063 T5
230231 5.2mm Keel 45 x 40 7000 16.282 6063 T5
230229 4.25mm / 5.25mm Chine 48 x 22 6000 7.284 6063 T5
230221 4.25mm Gunwhale 43 x 54 6500 9.405 6063 T5
230236 50mm Coaming - Facia 16 x 50 6500 3.471 6063 T5
230232 90mm Flat Coaming - Facia 16 x 90 4600 4.613 6063 T5
230233 90mm Flat Coaming - Facia 16 x 90 6000 6.018 6063 T5
230235 50mm Flat Coaming - Facia 16 x 50 6500 3.842 6063 T5
141689 1 Slot Recessed Coaming - Facia 16 x 50 6500 5.584 6063 T591
141742 47mm Recessed Gunwhale 32 x 47 6500 5.408 6060 T591
141691 2 Slot Recessed Coaming - Facia 16 x 80 6500 7.092 6063 T591
153634 63mm Recessed Gunwhale 32 x 63 6500 9.419 6063 T591
205371 63.5mm Top Hat 31.75 x 63.5 4867 4.614 6060 T591
230461 Transom Double Channel RE 40 x 100 6500 11.147 6063 T5
See next page for images.
Refer to material no.
* Please check with your local BlueScope branch for section availability
Aluminium Guide Product Catalogue Edition 1 38
230221 212852
230229 230227216266
230230 / 230231157828
Marine Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 39
190776
190777
189653
230461
141731 210283
Marine Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 40
230232 / 230233
230236
230235
202366
147901
Marine Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 41
Marine Extrusions (continued)
20537163.5MM TOP HAT
15363463MM RECESSED GUNWHALE
1416912 SLOT RECESSED COAMING - FACIA
14174247MM RECESSED GUNWHALE
1416891 SLOT RECESSED COAMING - FACIA
Aluminium Guide Product Catalogue Edition 1 42
Transport Extrusions
Material No.
Section (mm)
Dimensions (H x W) (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
214703 Small bottom corner 192 x 200 11000 70.84 6005a T5
214704 Corner post 82 x 100 6500 51.78 6005a T5
212770 Small top rail 114 x 216 11000 82.98 6005a T5
227571 Splashguard 157 x 251 11000 50.82 6106 T6
169929 Tautliner Track 42 x 75 6000 12.39 6106 T6
134771 Tautliner Track 42 x 75 15.74 6106 T6
194218 Tautliner Track 42 x 75 8500 17.56 6106 T6
210147 Main Beam 232.6 x 152.4 11000 153.13 6005a T5
212582 One Piece Beam 150 x 384 9750 177.23 6005a T5
212583 One Piece Beam 150 x 384 11000 199.95 6005a T5
177671 Beam Base 41.5 x 100 11000 73.35 6005a T5
210150 Tarp Roller Tube 53 x 53 10400 17.75 6060 T5
215584 Tarp Roller Tube 53 x 53 11500 19.63 6060 T5
210149 101.6 Lip Channel 101.6 x 76.2 6000 29.09 6061 T6
204995 Axle Block 56 x 56 2000 7.07 6063 T5
210153 Tailgate 54.93 x 142.10 2240 9.86 6106 T6
214887 Rear Pillar 75 x 143 6000 52.90 6005a T5
170376 Coaming Top Tailgate 216 x 114 5000 37.62 6005a T5
154266 Inner Coaming 140 x 167 11000 79.00 6005a T5
199858 Inner Coaming 140 x 167 12800 91.93 6005a T5
148422 Rear Pillar 75 x 122 6500 49.67 6005a T5
227378 Bullbar Spotlight Bracket 36 x 88 6000 17.59 6060 T5
216027 I Beam 203 x 101.6 x 8 x 11 203 x 101.6 9600 98.52 6082 T6
216028 I Beam 220 x 100 x 5 x 10 220 x 100 78.12 6082 T6
230042 I Beam 270 x 100 x 6 x 10 270 x 100 9600 91.23 6082 T6
179224 Top Coaming 169 x 83 8500 46.71 6005a T5
154273 Top Coaming 169 x 83 60.28 6005a T5
199859 Top Coaming 169 x 83 12800 70.32 6005a T5
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 43
Material No.
Section (mm)
Dimensions (H x W) (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
212829 Large Top Coaming 232 x 140 11000 116.69 6005a T5
193796 Bottom Coaming 294 x 230 5000 52.24 6005a T5
190817 Bottom Coaming 294 x 230 6700 71.75 6005a T5
179222 Bottom Coaming 294 x 230 91.03 6005a T5
154306 Bottom Coaming 294 x 230 11000 117.80 6005a T5
207026 Ute - Dropside 250 x 40 1860 4.32 6063 T5
197905 Ute - Dropside 250 x 40 5.57 6063 T5
197906 Ute - Dropside 250 x 40 3000 6.97 6063 T5
208665 Ute - Front Coaming 70 x 92 3725 4.32 6063 T5
197911 Ute - Headboard 35 x 100 3000 5.39 6063 T5
197909 Ute - Large Floorplank 176 x 30 2000 3.47 6063 T5
198529 Ute - Large Floorplank 176 x 30 2500 4.34 6063 T5
208666 Ute - Rear Coaming 79 x 50 3725 4.91 6063 T5
197901 Ute - Rope Rail 115 x 30 6500 15.80 6063 T5
197902 Ute - Side Coaming 79 x 30 4920 5.99 6063 T5
Transport Extrusions (continued)
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 44
208666
197911
197902
208665
212770
Transport Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 45
210153
169929
177671
Transport Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 46
210147
Transport Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 47
210149
197901
214887
Transport Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 48
197909
207026
210150
204995
Transport Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 49
Transport Extrusions (continued)
214703BOTTOM CORNER
214704TIPER BODY CORNER POST
227378BULLBAR SPOTLIGHT BRACKET
212582ONE PIECE BEAM
216027
Aluminium Guide Product Catalogue Edition 1 50
Transport Extrusions (continued)
170376COAMING TOP TAILGATE
Aluminium Guide Product Catalogue Edition 1 51
Transport Extrusions (continued)
212829LARGE TOP COAMING
Aluminium Guide Product Catalogue Edition 1 52
Transport Extrusions (continued)
148422
193796BOTTOM COAMING
Aluminium Guide Product Catalogue Edition 1 53
Transport Extrusions (continued)
154266INNER COAMING
Aluminium Guide Product Catalogue Edition 1 54
Transport Extrusions (continued)
179224TOP COAMING
Aluminium Guide Product Catalogue Edition 1 55
Transport Extrusions (continued)
227571SPLASHGUARD
Aluminium Guide Product Catalogue Edition 1 56
Material No.
Section (mm)
Dimensions (mm)
RE (y/n)
PunchingHole size (mm)
Hole spacings
(mm)
Length (mm)
Mass per
length (kg)
Alloy and
TemperWA SA VIC NSW QLD
231486 Tube 16 x 1.2 1190 0.18 6060 T5
158251 Tube 16 x 1.2 6500 0.98 6060 T5
231487 Tube 16 x 1.6 1190 0.23 6060 T5
135127 Tube 16 x 1.6 6500 1.27 6060 T5
202178 Tube 19 x 1.6 6500 1.45 6060 T5
231489 Rectangular Box 38 x 25 x 1.5 Single 16.5 100 3000 1.42 6060 T5
231497 Rectangular Box 38 x 25 x 1.5 Double 16.5 100 3000 1.42 6060 T5
231500 Rectangular Box 38 x 25 x 1.5 Single 16.5 90 2475 1.17 6060 T5
231501 Rectangular Box 38 x 25 x 1.5 Double 16.5 90 2475 1.17 6060 T5
231498 Rectangular Box 38 x 25 x 1.5 Single 16.5 90 3000 1.42 6060 T5
231499 Rectangular Box 38 x 25 x 1.5 Double 16.5 90 3000 1.42 6060 T5
231502 Rectangular Box 38 x 25 x 1.5 Single 19.5 90 2475 1.17 6060 T5
231503 Rectangular Box 38 x 25 x 1.5 Double 19.5 90 2475 1.17 6060 T5
231504 Rectangular Box 38 x 25 x 1.5 Single 19.5 90 3000 1.42 6060 T5
231505 Rectangular Box 38 x 25 x 1.5 Double 19.5 90 3000 1.42 6060 T5
231506 Rectangular Box 38 x 25 x 1.5 Single 19.5 100 2475 1.17 6060 T5
231507 Rectangular Box 38 x 25 x 1.5 Double 19.5 100 2475 1.17 6060 T5
231508 Rectangular Box 38 x 25 x 1.5 6100 2.88 6060 T5
231509 Rectangular Box 38 x 25 x 1.5 7250 3.42 6060 T5
170695 Rectangular Box 38 x 25 x 2.0 6500 4.06 6060 T5
142033 Box 40 x 40 x 1.6 6500 4.34 6060 T5
135287 Box 40 x 40 x 3.0 6500 7.82 6060 T5
148908 Box 50 x 50 x 1.6 6500 5.45 6060 T5
154900 Box 50 x 50 x 3.0 6500 9.93 6060 T5
231510 Box 50 x 50 x 1.6 1800 1.69 6060 T5
231511 Box 50 x 50 x 1.6 2100 1.97 6060 T5
231512 Box 50 x 50 x 1.6 6500 6.10 6060 T5
Fencing Extrusions
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 57
Material No.
Section (mm)
Dimensions (mm)
RE (y/n)
PunchingHole size (mm)
Hole spacings
(mm)
Length (mm)
Mass per
length (kg)
Alloy and
TemperWA SA VIC NSW QLD
231515 Box 50 x 50 x 1.8 1800 1.68 6060 T5
231516 Box 50 x 50 x 1.8 2100 1.96 6060 T5
231513 Box 50 x 50 x 1.8 6500 6.07 6060 T5
229863 Box 65 x 65 x 2.5 6500 11.01 6060 T5
135324 Box 100 x 50 x 3.0 6500 15.22 6060 T5
231522 Slat Section 50 x 10 x 1.2 6500 2.42 6060 T5
229872 Slat Section 65 x 16 x 1.2 6500 3.31 6060 T5
182473 Slat Section 65 x 16 x 1.4 6500 3.76 6060 T5
231523 Slat Section 76 x 16 x 1.2 6500 3.77 6060 T5
231521 Slat Section 100 x 16 x 1.4 6500 5.81 6060 T5
Fencing Extrusions (continued)
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 58
231522Slat Section
231521Slat Section
231523Slat Section
Fencing Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 59
Balustrade Extrusions
Material No.
Section (mm)
Dimensions (H x W) (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
181286 Infill Clip to suit SQ post 12.6 x 21.92 5600 0.97 6106 T6
181283 50mm SQ - 1 way glazing post 50 x 50 5600 10.47 6106 T6
181284 50mm SQ - 2 way glazing post 180deg 50 x 50 5600 12.24 6106 T6
193726 50mm SQ - 2 way glazing post 90deg 50 x 50 5600 9.29 6106 T6
183095 50mm RND - 3 way glazing post 50 x 50 5600 8.79 6005A T5
183059 50mm RND - 1 way glazing post 50 x 50 5600 8.75 6005A T5
208984 50mm RND - 2 way glazing post 45deg 50 x 50 5600 8.84 6106 T6
183060 50mm RND - 2 way glazing post 180deg 50 x 50 5600 9.76 6106 T6
183091 50mm RND - 2 way glazing post 90deg 50 x 50 5600 8.96 6005A T5
183094 Infill Clip to suit RND post 15.28 x 21.92 5600 1.23 6005A T5
210334 50mm SQ - 1 way slat post 50 x 70 6100 6.95 6005A T5
210335 50mm SQ - 2 way slat post - 180deg 50 x 90 6100 7.83 6005A T5
210336 50mm SQ - 2 way slat post - 90deg 70 x 70 6100 7.83 6005A T5
180901 38mm Oval Baluster 19.05 x 38 6500 3.16 6060 T6
231528 70 x 39.5 Flat bottom Oval Handrail 39.5 x 70 6500 5.40 6060 T5
231538 70 x 39.5 Flat bottom Oval Glazing 39.5 x 70 6500 6.97 6060 T5
231592 Infil clip to suit Oval Glazing 16.67 x 27.6 6500 1.64 6060 T5
231583 Ladies Waist Handrail 60 x 74 6500 7.87 6060 T5
231588 60mm Round Glazing Handrail 60 x 60 6500 7.88 6060 T5
231594 Infill clip to suite 60mm Round Glazing 19.8 x 18.8 6500 1.30 6060 T5
231596 Sliding Gate Rail 50.8 x 83.3 6500 12.32 6060 T5
231615 Gate Track 20 x 80 6500 8.24 6060 T5
231617 40 x 40 Screen Frame 40 x 40 6500 6.60 6060 T5
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 60
Balustrade Extrusions (continued)
181286
181283 181284 193726
231592
183094231594
Aluminium Guide Product Catalogue Edition 1 61
Balustrade Extrusions (continued)
231528
231538
231588
18309550MM RND - 3 WAY GLAZING POST
Aluminium Guide Product Catalogue Edition 1 62
Balustrade Extrusions (continued)
210334
210335
210336
231596
231615
Aluminium Guide Product Catalogue Edition 1 63
231617
183059 183060 183091
208984
180901
231583
Balustrade Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 64
Louvre Extrusions
Material No.
Section (mm)
Dimensions (H x W) (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
231619 50mm Elliptical Blade 10 x 50 6500 2.38 6060 T5
231620 70mm Elliptical Blade 15 x 70 6500 4.11 6060 T5
231621 90mm Elliptical Blade 15 x 90 6500 5.23 6060 T5
231622 100mm Elliptical Blade 20 x 100 6500 7.18 6060 T5
231623 120mm Elliptical Blade 20 x 120 6500 8.35 6060 T5
231624 150mm Elliptical Blade 30 x 150 6500 11.34 6060 T5
231625 150mm Elliptical Blade 20 x 150 6500 11.52 6060 T5
231674 90mm Elliptical Blade Bracket 14 x 85 6500 7.93 6060 T5
231675 100mm Elliptical Blade Bracket 14 x 86 6500 7.96 6060 T5
231676 150mm Elliptical Blade Bracket 32 x 96 6500 26.55 6060 T5
231677 50mm Ventilation Blade 51 x 38.6 6500 2.54 6060 T5
231678 100mm Ventilation Blade 100 x 75 6500 5.69 6060 T5
231679 133mm Ventilation Blade 133 x 97 6500 7.33 6060 T5
231680 60 x 20 Suncreen Blade 10 x 60 6500 2.61 6060 T5
231681 80 x 20 Suncreeen Blade 10 x 80 6500 3.61 6060 T5
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 65
Louvre Extrusions (continued)
231619
231621
231620
231677
231680
231681
Aluminium Guide Product Catalogue Edition 1 66
Louvre Extrusions (continued)
231678
231679
Aluminium Guide Product Catalogue Edition 1 67
Louvre Extrusions (continued)
231622231623231624231625
Aluminium Guide Product Catalogue Edition 1 68
Louvre Extrusions (continued)
231674
231675
231676
Aluminium Guide Product Catalogue Edition 1 69
Signage Extrusions
Material No.
Section (mm)
Dimensions (H x W) (mm)
Length (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
154216 25mm Backing Rail 25.5 x 28.5 6500 2.38 6060 T5
227323 25mm HVY Backing Rail 25.5 x 28.5 800 0.54 6060 T5
227324 25mm HVY Backing Rail 25.5 x 28.5 1100 0.74 6060 T5
227325 25mm HVY Backing Rail 25.5 x 28.5 1500 1.01 6060 T5
227326 25mm HVY Backing Rail 25.5 x 28.5 6000 4.04 6060 T5
231683 Type 2A Backing Rail 40 x 44 6500 8.54 6060 T5
231684 133.3mm Sign Frame 16.2 x 133.3 6500 6.68 6060 T5
231685 150mm Sign Frame 20 x 150 6500 7.78 6060 T5
197301 168mm Sign Frame 26 x 168 6500 11.88 6060 T5
231686 180.4mm Sign Frame 17 x 180.4 6500 9.30 6060 T5
231687 200mm Sign Frame 21 x 200 6500 15.39 6060 T5
231700 Male Sign Bracket 30 x 107.22 6500 7.82 6060 T5
231701 Female Sign Bracket 30 x 104.82 6500 7.44 6060 T5
231702 200mm Sign Blade 12.7 x 200.03 6500 11.52 6060 T5
231703 200mm HVY Sign Blade 15.88 x 203.2 6500 16.61 6060 T5
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 70
Signage Extrusions (continued)
154216 231683227323
231684
Aluminium Guide Product Catalogue Edition 1 71
197301231687 231685231686
Signage Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 72
231700 231701
231702 231703
Signage Extrusions (continued)
Aluminium Guide Product Catalogue Edition 1 73
Coolroom Extrusions
Material No.
Section (mm)
Dimensions (H x W) (mm)
FinishLength (mm)
Mass per length (kg)
Alloy and temper
WA SA VIC NSW QLD
231704 35mm Coving 35 x 35 various 6500 1.51 6060 T5
231705 50mm Coving 50 x 50 various 6500 2.92 6060 T5
231706 55.8 x 30 Base Channel 30 x 55.8 various 6500 3.29 6060 T5
231707 81 x 38 Base Channel 38 x 81 various 6500 4.36 6060 T5
231708 85 x 36 Base Channel 36 x 85 various 6500 4.30 6060 T5
231709 106 x 36 Base Channel 36 x 106 various 6500 4.92 6060 T5
231710 157.36 x 37.95 Base Channel 37.95 x 157.36 various 6500 8.44 6060 T5
231711 53.2 x 25 Channel 25 x 53.2 various 6500 2.12 6060 T5
231712 76 x 38 Channel 38 x 76 various 6500 3.94 6060 T5
231713 106 x 40 Channel 40 x 106 various 6500 9.37 6060 T5
231714 168.3 x 25.4 Channel 25.4 x 168.3 various 6500 10.65 6060 T5
231715 70 x 40 Angle 40 x 70 various 6500 2.87 6060 T5
231716 150 x 25.4 Angle 25.4 x 150 various 6500 9.04 6060 T5
231717 58mm Door Jam 55 x 58 various 6500 4.64 6060 T5
231718 70mm Door Handle 70 x 87 various 6500 11.69 6060 T5
231719 50mm Door Track 50 x 90 various 6500 10.54 6060 T5
231720 Large Door Track 40 x 150 various 6500 19.16 6060 T5
231721 Sliding Door Base 50 x 90 various 6500 10.54 6060 T5
* Please check with your local BlueScope branch for section availability
See next page for images.
Refer to material no.
Aluminium Guide Product Catalogue Edition 1 74
Coolroom Extrusions (continued)
231719
231718
231704 231705
Aluminium Guide Product Catalogue Edition 1 75
Coolroom Extrusions (continued)
231711
231706
231717
231721SLIDING DOOR BASE
Aluminium Guide Product Catalogue Edition 1 76
Coolroom Extrusions (continued)
231720
231716
231715
Aluminium Guide Product Catalogue Edition 1 77
Material No.Thickness
(mm)Width (mm)
Length (mm)
Mass per sheet (kg)
WA SA VIC NSW QLD
105683 0.6 1200 2400 4.68
105683 0.8 1200 2400 6.22
126142 1.0 1200 2400 7.78
126141 1.0* 1200 2400 7.78
126150 1.2 1200 2400 9.33
131022 1.2* 1200 2400 9.33
142327 1.2 1200 3000 11.66
126156 1.6 1200 1800 9.33
110711 1.6 1200 2400 12.44
126153 1.6* 1200 2400 12.44
130788 1.6 1200 3000 15.55
126157 1.6 1500 2400 15.61
126158 1.6 1500 3000 19.51
142330 1.6 1500 3600 23.41
131354 2.0 1200 1800 11.66
110712 2.0 1200 2400 15.55
126163 2.0* 1200 2400 15.55
140528 2.0 1200 3600 23.33
126166 2.0 1500 2400 19.51
132621 2.0 1500 3000 24.39
133022 2.0 1500 3600 29.27
126172 2.5 1200 2400 19.29
126169 2.5* 1200 2400 19.29
126173 2.5 1500 2400 24.11
159615 2.5 1500 3000 30.14
110713 3.0 1200 2400 23.33
126184 3.0* 1200 2400 23.33
142345 3.0 1200 3000 29.27
128241 3.0 1200 3600 34.99
Sheet 5005 H34
* Denotes PVC
Aluminium Guide Product Catalogue Edition 1 78
Material No.Thickness
(mm)Width (mm)
Length (mm)
Mass per sheet (kg)
WA SA VIC NSW QLD
130716 3.0 1500 3000 36.45
126189 3.0 1500 2400 29.16
130716 3.0 1500 3000 36.45
159636 3.0* 1500 3000 36.45
142347 3.0 1500 3600 43.74
115035 4.0 1200 2400 31.10
140883 4.0 1500 3000 48.78
108808 5.0 1200 2400 38.88
204448 5.0 1500 3000 60.98
173646 5.0* 1200 2400 38.88
115036 6.0 1200 2400 46.66
215887 6.0 1500 3000 73.17
Sheet 5005 H34 (continued)
* Denotes PVC
Aluminium Guide Product Catalogue Edition 1 79
Material No.Thickness
(mm)Width (mm)
Length (mm)
Mass per sheet (kg)
WA SA VIC NSW QLD
126160 1.6 1200 2400 12.49
131674 2.0 1200 2400 15.55
142335 2.0 1200 6000 39.02
191248 2.0 1500 3600 29.27
126180 2.5 1200 2400 19.29
147240 2.5 1200 6000 48.78
187442 2.5 1500 3600 40.98
142337 2.5 1500 6000 68.29
205672 3.0 1020 4700 38.98
205673 3.0 1020 5100 42.30
132454 3.0 1200 2400 23.24
127751 3.0* 1200 2400 23.24
140532 3.0 1200 6000 58.54
149025 3.0 1500 3000 36.59
159652 3.0 1500 6000 73.18
194723 3.0 1525 6000 74.40
140536 4.0 1200 2400 31.22
200458 4.0 1200 6100 79.35
Sheet 5052 / 5251 H32
* Denotes PVC
Aluminium Guide Product Catalogue Edition 1 80
Material No.Thickness
(mm)Width (mm)
Length (mm)
Mass per sheet (kg)
WA SA VIC NSW QLD
194029 1.55 750 3000 9.45
194030 1.55 900 3600 13.61
194083 1.55 1200 2400 12.10
227644 1.55 (LIN80) 1200 2400 12.10
227645 1.55 (LIN80) 1200 3000 15.12
227646 1.55 (LIN80) 1200 3600 18.14
163243 1.60 1200 2400 12.49
173203 1.6 (LIN DS) 750 3000 9.45
227647 1.95 (LIN80) 750 3000 11.89
227648 1.95 (LIN80) 900 2100 9.99
227649 1.95 (LIN80) 1200 2400 15.22
Sheet 5052 / 5251 H38
Aluminium Guide Product Catalogue Edition 1 81
Material No.Thickness
(mm)Width (mm)
Length (mm)
Mass per sheet (kg)
WA SA VIC NSW QLD
142352 3.0 1200 2400 22.98
142353 3.0 1200 6100 59.51
142354 3.0 1525 6100 74.23
159652 3.0 2200 9000 160.97
162713 4.0 1200 2400 30.64
142363 4.0 1200 6100 77.89
172158 4.0 1525 6100 100.84
142368 4.0 1830 6100 121.01
170530 4.0 2200 9000 210.67
154980 5.0 1200 2400 38.30
142380 5.0 1200 6100 99.19
140546 5.0 1525 6100 126.05
154999 5.0 1830 6100 151.26
170551 5.0 2200 9000 263.34
199300 5.0 2200 10300 301.38
135342 6.0 1200 2400 45.97
142290 6.0 1200 6100 119.02
142291 6.0 1525 6100 151.26
142292 6.0 1830 6100 178.16
148939 6.0 1980 6100 196.39
200649 6.0 1980 11800 379.90
159514 6.0 2200 9000 316.01
142300 8.0 1200 2400 61.29
207452 8.0 1200 3000 76.61
142301 8.0 1830 6100 242.01
194304 8.0 1830 9000 357.06
148961 8.0 1980 6100 261.85
172268 8.0 2200 9000 421.34
142304 10.0 1200 2400 76.61
142305 10.0 1200 6000 218.89
Sheet & plate 5083 DNV H116
Aluminium Guide Product Catalogue Edition 1 82
Material No.Thickness
(mm)Width (mm)
Length (mm)
Mass per sheet (kg)
WA SA VIC NSW QLD
162870 10.0 1830 6100 302.52
142311 12.0 1200 2400 91.93
159538 12.0 1200 6100 238.05
142314 16.0 1200 2400 124.88
154944 16.0 1200 6100 317.40
142318 20.0 1200 2400 156.10
158210 20.0 1200 6100 396.75
142320 25.0 1200 2400 195.12
Sheet & plate 5083 DNV H116 (continued)
Aluminium Guide Product Catalogue Edition 1 83
Material No.Thickness
(mm)Width (mm)
Length (mm)
Mass per sheet (kg)
Alloy Temper WA SA VIC NSW QLD
149099 1.6* 1219 2438 13.82 3003 H22
135418 1.6 1200 2400 14.40 5052 O
135420 2.0 1200 2400 17.86 5052 O
135424 2.5 1200 2400 22.18 5052 O
149108 3.0* 1219 2438 26.15 3003 H22
135428 3.0 1200 2400 25.34 5052 O
142386 3.0 1200 3600 38.02 5052 O
149111 3.0 1200 6000 63.37 5052 O
155027 3.0 1525 3658 49.10 5052 O
215395 4.0 1200 2400 33.98 5052 O
135432 4.0 1200 6000 84.96 5052 O
149115 5.0* 1218 2438 43.94 3002 H22
135435 5.0 1200 2400 42.62 5052 O
142387 5.0 1200 3600 63.94 5052 O
135440 6.0 1200 2400 49.82 5052 O
142388 6.0 1200 3600 74.74 5052 O
Treadplate 5BAR
* Denotes propellor bright
5BAR Propellor Bright
Aluminium Guide Product Catalogue Edition 1 84
Painted Sheet & CoilAluminium coils are painted at the paint line at Erskine Park in NSW. This is where COLORBOND® steel, the flagship product of BlueScope is also painted. Painted aluminium, backed up by BlueScope painting technology, is the ultimate solution for challenging building environments. Other applications include wine tanks, air condition panels and caravan panels.
THICKNESS RANGE *0.55mm to 1.6mm
WIDTH RANGE *940mm to 1260mm
* refer to BlueScope for sizes outside the range
PAINT TYPEPolyester / Fluorocarbon / Flurocarbon Pearlescent
PAINT COLOURFull Range of BlueScope Colours and Custom Colour Match
PROTECTIONCan Apply Polyethylene Film on Top Colour, if required
BRANDINGCan Print Brand on the Reverse Side of the Coil
MINIMUM ORDER QUANTITYOne Aluminium Coil ( ~ 4t). The coil can be painted in two colours, if required.
While every attempt has been made to ensure the correctness and currency of information shown in this aluminium catalogue, as of the publication date BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution accepts no responsibility for any errors in the catalogue nor any information that may have been omitted from the catalogue.
As new information becomes available, every attempt will be made to maintain the currency of the catalogue. If there are any further requirements for information on aluminium alloys, wrought products and final product applications that are not covered in the catalogue then readers are encouraged to contact their regional Distribution office for assistance.
The information in this catalogue is provided for your convenience only. You are responsible for selecting, presenting and checking that the designs you provide/specify or the product you select (including any applicable treatments and finishes) meet your needs and will be fit for the application in which you intend to use the end products. BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution accepts no responsibility for any damage or loss you or any other person suffers or any liability flowing from your use of or reliance on the information in this publication. To the maximum extent permitted by law, BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution cannot by law be excluded, limits its liability to re-providing the information contained in this catalogue or (at its option) replacing the relevant products.
DISCLAIMER