Blue Operation Manual

5/26/2018 Blue Operation Manual

1/92

Read all instruction before start-up the machine

MODE L S BPS 101\ 201\ 301

OPRATIN G MAN AUL

BL UE PRIN T SOL UTION S

Please save this instruction manual for later use


2/92


3/92

1

ABOUT US

Ningbo R.D.C Office Equipment Co, Ltd was established in 1988. With fast

development, R.D.C has invested and extended the second factory in the new industry

area, Yinzhou Investment and Innovation Center, in 2001.

Ningbo R.D.C Office Equipment Co, Ltd is one of the famous high-tech office

equipment company, producing digital duplicator, stencil duplicator, folding machine,

binding machine, paper shredder, paper cutter and so on. Our company was awarded

National key high-tech enterprise by the National Ministry of Science and

Technology.

We insist on Quality Today, Market Share Tomorrow as our guideline, take Developing

print technique, promoting national industry as our task, and successfully developed

series of digital duplicator. Digital duplicator integrates scanning, master making andprinting functions. It is of advanced technologies and high degree of difficulty, filled the

technology blankness in China, and obtained 24 items national patent. These products

obtained series of national honors like National New Product, National Torch Program,

National Technology Innovation fund etc. Currently our digital duplicators have 2

registered brands, RongDa and Caven, including more than 30 models.

R.D.C has an excellent management team, and strictly carries out ISO9001:2000 on

management and control. Our products are not only sold all over China, but also exported

to Japan, Korea, Singapore, Thailand, Malaysia, Brazil, South Africa, Middle East, andother countries and districts. Fast and excellent after service ensure our customer free from

any possible after-sales trouble. Satisfaction of our customer is our best promise.

Young, brave and sapiential Rongda people would like to strive together with all friends

and promote Chinese printing technology to step forward to the world!

Address928, ChengXin Road, YinZhou Investment & Innovation Center

Website: www.nbrdc.com

Declaration

1. This product is A-Grade, which may cause radio interference in the environment. In this

case, the user may need to take counter measure against it.

2. Any modification on the specification shall not be notified. Please kindly understand and

coutact the manufacturer if there is any question on this manual.


4/92

market and technically support the range of products.The Blue range of Duplicators

our range of Duplicators for the past 5 years. They are fully trained and certified to

Ningbo R.D.C Office Equipment Co., Ltd.

For any further information please dont hesitate to contact the undersigned.

It is an exclusive brand that is only distributed by Bule Print Solutions and their

Distributions Network..

are manufactured by R.D.C. OFFICE EQUIPMENT:

This is to confirm that Blue Solutions International has been a Global Distrobutor of

To whom it may concern.

16 February 2010th

DISTRIBUTOR CERTIFICATE

Signature:

2

Stamp:

signed by General Manager

Yours Sincerely,


5/92

3

Distributor Certificate 2

Declaration 1

Contents

About Us1

Safety Guides6

Machine Placement9

Machine Cleaning10

Notice on Printing and Printouts11

Chapter 1. Before Use

Part Name and Functions13

Paper Feed Part15

Drum Unit16

Paper Receiving Part16

Master Disposal Box Part17

Master Making Part17

Operation Panel18

Specified Original and Printing Paper20

The Principles of Master Making and Printing21

Capital 2. Basic Functions of Master Making and Print

Turn on the Power24

Placement of Printing Paper25

Open the Paper Receiving Tray26

Installation of Master27

Installation of Ink29

Placement of Original30

Choose Paper Size32

Master Making34

Printing35

Turn off the Power36


6/92

75

Display Error on LCD and Simple Solution73

Master Making/printing Error72

No Current71

4

Chapter 3 Printing Operation

Enlargement and Reduction38

Automatic Zoom39

Free Zoom41

Density Adjusting42

Scanning Density Adjusting 42

Master-making Density Adjusting 43

Printing Density Adjusting 43

Char/Char&Photo/ Photo Mode44

Two in one Master Making45

Book Mode 47

Chapter 4 Other Functions

Counter Display Function50

Printing Speed Adjustment51

Printing Position Adjustment 52

Power Save Function53

Confidential Function53

Computer Print Function54

The Instruction of Driver Installation55

Chapter 5 Consumables Replacement

Ink Replacement63

Master Replacement65

Taking out Disposal Master67

Printing Paper Replacement69

Chapter 6 Trouble Shooting

Placement of Drum


7/92

Replace the Soft Screen90

Replace /Clean the Printing Roller89

Replace the Paper Switch88

Replace the Friction Pad87

Maintenance86

Specifications85

Master Load Error82

Master Ejection Error80

Paper Jam77

Paper Empty76

5

Chapter 7 Specifications and Maintenance


8/92

It means forbidden.

machines. These indications are for dangerous

Safety Guides(Please read this section carefully and follow it)

There are different symbols and pictures in this manual, and some labels are also attached on the

warning. The explanation is as below:

Warning: Very dangerous. It may cause serious harm by incorrect operation.

Attention: Very dangerous. It may cause hurt by careless operation.

In some case it means a indication while in some case it means forbidden.

These are very serioussafety guides which should be followed.

Warnings:

When sundries get into inside of the machine, please do not use the machine,

otherwise it may cause fire or electric shock.

Please first cut off power and contact the dealer.

Please do not use the machine under unusual condition like high temperature,

smoke, fog or abnormal odor; otherwise it may result in fire and electric shock.

Please first cut off power and contact the dealer.

6


9/92

Warnings:

Please do not repair the machine.

Or it may cause fire or short circuit.

Please do not teardown the machine optionally.

High voltage inside the machine may cause fire or short circuit.

Please do not cut off the power with waterish hand.

Or it will cause short circuit.

Please do not mangle, dismantle or pull the power cord.

Do not put heavy object on the power cord or tied the power cord.

Please do not insert or drop the metal, tinder into the machine.


Do not put vase, cup or water container on the machine.

Liquid flowing into the machine may cause fire or short circuit.

Do not use power otherwise than specified voltage or connect the machine.

to more than one power source.


Do not locate the machine in a polluted or dusty place.


7


10/92

Cautions:

Please pull out the power cord before move the machine.

If the power cord is damaged, fire or short circuit may happen.

When take off the power plug, please do not pull the power cord.

Or the power cord will be damaged which may cause fire or short circuit.

Please do not place the machine on an unsteady place.

In case the machine is overturned, injures may be caused.

Make sure to fix the machines feet wheel once locate the machine.

In case the machine is overturned, injures may be caused.

8


11/92

Machine Placement

Put the machine on a level and steady place.

Keep the machine away from dusty place.

Dont keep machines exposed to direct sun light or

heating equipment like stoves, otherwise the ink will be

metamorphosed, which will result in poor print quality.

Moreover, direct sun light will result in wrong display

of LCD. Also keep the machine away from too cold ortoo wet circumstance.

9


12/92

be damaged or its color will be changed.

Machine Cleaning

Please clean the machine according to the

following way. Clean the machine with soft

cloth, water and neutral solvent. The alcohol

and organic solvent are not allowed to clean

machines, otherwise the machine cover shall

The machine needs cleaning at least once aweek. Make sure to cut off the power and take

off the power plug before cleaning.

When cleaning the glass table, please use soft

cloth to wipe off the dust.

Warning

Make sure to take off the power plugs before clean, or it will cause fire

or short circuit.

Do not make the water or cleanser flow into the machine, in case this

happens please contact the dealer, otherwise it will cause fire or short of

circuit.

10


13/92

license, permits, food ticket should be careful to print.

printed according to the number that

Notice on Printing and Printouts

Caution:

There are some restriction on the presswork, please confirm whether the presswork is

legal or not.

1. Forbidden presswork.

Notes, currency, government stock and local government stock are forbidden to

print, even stamped with Sample.

Notes, currency and government stock which are valid abroad are forbidden to print.

Unused stamp and post card are forbidden to print without approval by thegovernment.

Government issued stamp and the tax paper are forbidden to print.

2. All kinds of stock, permits, bills should be

government allowed. Government issued passports, public/private driving

3. Original with printing droit.

The personal collection and the related unsaleables like books, music book, artwork,

pictures, maps, and photos are not allowed to print.

11


14/92

12

Chapter 1

Before Use

This chapter provides the basic information about the machines, including

the names of parts, all buttons of control panels, requirement of originals

and print paper.

Part Name and Functions13

Paper Feed Part15

Drum Unit16

Paper Receiving Part16

Disposal Master Box Part17

Master Making Part17

Operation Panel18

Specified Original and Print Paper20

Specified Original20 Specified Print Paper21The Principles of Master Making and Printing21

Master Making21

Printing22


15/92

Machine appearance (BPS 101)

Part Name and Functions

34

13

Item Part Functions.

1 Control panel Displays the machine information, and control

machines working process.

2 Original receiving tray Delivers and receives the original.

3 Scan cover Original scan.

4 Original guiding tray Feeds and locates the original.

5 Paper receiving tray Receives and loads the printouts.

6 Stand (optional) Machine location.7 Front door Open the door to replace drum and install ink.

8 Power supply switch Turn on/off power.

9 Paper feed tray Paper loading.

10 Power cord Connect the power.

1 2

10

59

8

7 6


16/92

Machine appearance (BPS 201)

1

10

92

8

7

3

4

5

6

14

Item Part Functions.

1 Top cover Keeps good contact between the original and the scan glass.

2 Scan flat lock level Locks up the scan part.

3 Power supply socket Connect the power.

4 Paper feed tray Paper loading.

5 Power supply switch Turn on/off power.

6 Stand (optional) Machine location.

7 Paper receiving tray Receives and loads the paper.

8 Front door Open the door to replace drum and install ink.

9 Control panel Displays the machine information and control working

process master plate and print.

10 Scan glass Locates and scans the original.


17/92

Paper Feed Part (BPS 101/BPS 201)

Paper Feed Part (BPS 101/BPS 201) 9 81Paper feed pressure knob

15

2Power supply socket

3Paper feed roller

4Paper detecting switch

5Friction pad

6Paper guide


8Feed tray lock lever

9Paper guide adjusting knob

10Paper feed pressure knob

11Paper guide adjusting knob


13Paper guide

14Paper feed roller

15Friction pad

16Paper detecting switch

17Power supply switch

1

2

3

45 6 7

10

11

12

13

141715 16


18/92

22 Drum Unit

16

18Drum spanner1819Ink bracket

20Ink case switch

21Drum lock switch

22Drum

23Ink chip device (optional)

Paper Receiving Part24Disposal master box switch

25Printing pressure adjusting lever

26Blower

27Central guide

28Paper receiving guide

29Paper guide plate

30Paper transport belt

19

20

23 21

30

24

25

27

28 29

26


19/92

Master Disposal Box Part 32 3331

31Disposal master box cover

17

32Cover switch

33Disposal master full switch

34Blower mouth

34

Master Making Part

35Master guide board

36Cutter switch

37Thermal head release lever

38Master core bracket

39Master

40Cutter

41Master chip device (optional)

35 36 37 38 39 41

40


20/92

umber Key

Operation Panel

18

Item Name Function.

1 Zoom rate key To switch between automatic zoom mode and manual free zoom mode.

2 Power save key After 1 minute of pressing the key, the machine enter power save mode,

then exit by pressing any key.

3 Set key To enter password set interface.

4 Photo mode key Press it to enter photo mode interface.

5 Auto zoom key Press it to enter zooming rate interface.

6 File mode key Press it to enter file mode interface.

7 Confirm key Confirm the selected item or the set parameters.

8 N Press it to input the printing number.

9 Test print key Print one sheet of test printout, and main display is effective.

10 Master making key Print it to start master making.

11 LCD screen brightness

adjust key

Adjust the backlight brightness of LCD.

12 Paper clips location Temporary location for paper clips used on the original.

13 Original size key Press it to select original size.

14 Copy size key Press it to adjust copy size.

15 Density key Press it to adjust density of scan or master plateincrease the density.

16 Density key Press it to adjust density of scan or master platereduce the density.17 Density convert key Press to convert between scan density and master plate density.

18 Print Speed key L Press it to reduce print speed.

19 Print Speed key R Press it to increase print speed.


21/92

Cancel or reset the number of printing paper.

five models sizes for BPS 201:

six sizes for BPS 201:

To indicate printout size, six models sizes for BPS 101 : B4

To indicate original size, six models sizes for BPS 101 : B4

19

20 Cursor keys Change selections in the Main Display. They function when the light is on.

21 Cancel key Cancel current settings, and back to the main interface.

22 * key

23 # key Press it to return all settings to initial status.

24 Stop key Press it to stop print.

25 Start key Press it to start print. The print number is not zero and the Main display is effective.

NO. Key press Functions

1 Zoom indicator light Indicates zoom rate including automatic rate and manual adjusting rate.

2 Setting indicator light Displays code setting state.

3 Energy saving indicator light Energy saving state.

4 LCD main screen Machine state, print sheet number, machine setting, error informationetc.

5 Err indicator light To indicate error on the machine.

6 Data transfer indicator light To indicate the state of master making.

7 Original size indicator light

A4B5A5Legal, Letter;

A3 B4A4B5A5Letter.

8 Printout size indicator light

A4B5A5Lagal, Letter, automatic zoom rate available;

B4A4B5A5Letterautomatic zoom rate available.9 Density conversion indicator

light

To indicate scanning density mode or master making density mode

light on for master making density, light off for scanning density.

10 Density indicator light To indicate scan density or master making density, five grades.

11 Print speed indicator light To indicate print speed, five levels, 55ppm, 70ppm, 85ppm, 105ppm,

120ppm.

12 Cursor keys indicator light When this light is on, the Cursor keys are functioned.


22/92

BPS 201

BPS 101

Notes:

1. It is not allowed to press two or more keys synchronously except the special instructions.

2. At least 1 second interval should be allowed when press two keys continuously.

Specified Original/Print PaperSpecified Original

Document feed mode

Size: Max257mm364mm

Book top mode

Weight: original paper or book not more than 10 kgs

Size: Max297mm420mm

Notes:

Following types of original can not be used:

The original with crack or file-binding holes.

The original which has been folded or violently curled.

The original with staples or paper clips.

Carbon-backed documents.

Adhesive paper.

High transparent original.

20


23/92

BPS 101/201

BPS 101

Specified Print Paper

Paper sheet 40g/ - 210g/

Paper size Max.297mm420mm Min.100mm50mm

Loading capacity Paper feed tray 950 sheets70g/ Paper receive tray 1000sheets70g/

21

Cautions

The following types of paper can not be used:

The paper with crack or file-binding holes.

The paper with clips or marked folds.

The paper which was violently curled.

Carbon-backed paper. Adhesive paper.

The Principles of Master Making and Printing

Master Making

First of all, the disposal master box collects the printed master and detectives the master collection.

Meanwhile the scanner head reads the image data from the original and transfer the data to the thermal

head. The thermal head prints the image data to the master, and the thermal master is loaded onto the

drum by mechanical part and then the test print is made.


24/92

print paper is delivered to the paper receiving tray.

BPS 201

Printing

The paper feed tray will support the paper up, and the paper is separated and delivered to the

second feed roller by cooperation work of paper feed roller and the paper separator pad. Then the paper

is delivered to the clearance between drum and pressure roller. After ink distribution procedures, the ink

is seeped from the tiny mesh of the thermal master on the drum, and through pressing by the pressure

roller to the paper and to the drum, the printing procedure is completed. Shortly the paper is separated

from the master by the blower device, and then by paper separate pawl and the paper transport belt the

22


25/92

Chapter 2

Basic Functions of Master Making and PrintThis chapter states basic procedure of master making and printing in

standard mode.

1. Turn on the Power 24

2. Placement of Printing Paper25

3. Open the Paper Receiving Tray26

4. Installation of Master27

5. Installation of Ink296. Placement of Original30

7. Choose Paper Size32

8. Master Making34

9. Printing35

10. Turn off the Power36

23


26/92

B P S 1 0 1 / 2 0 1

Basic Functions of Master Making and Print

1. Turn on the Power

1. Connect power cord;

2. Turn the power switch toposition;

24

LCD screen displays Ready, and the machine stays in standard mode:

The settings of standard mode is as listed below.

Printing number 0 Zoom rate 100%

Photo mode Char&Photo

P Position 0mm

Paper SizeB4

File mode Single

Density Middle

SpeedMiddle

B P S 1 0 1 / 2 0 1


27/92

The load capacity of BPS 101/201 is 950 sheets ( 70g/

2. Placement of Printing Paper

1Open the paper feed tray;

25

2Place the paper sheets, and locate the paper guide;

Notes:

)

3. Set feed pressure according to the thickness of paper sheets.

B P S 1 0 1 / 2 0 1

B P S 1 0 1 / 2 0 1

B P S 1 0 1 / 2 0 1


28/92

3. Open the Paper Receiving Tray

1. Open the paper receiving tray;

2. Open the paper receiving guide;

3. Open the central guide;

26


29/92

BPS 201

BPS 101

4. Adjust the paper receiving guide and central guide

according to the paper size;

5. Adjust the paper guide plate according to the print

image size.

4. Installation of Master

1. Open the original receive tray ;

Press the scan lock lever, and push the scan flat

27


30/92

and cut the extra master.

10mm to the cutter blade, pull the master straight, and

Open position, put the master head between the print

the print roller and thermal head, keep pressing the cutter

2. Press down the thermal head release lever to Open

position;

Notes

Do not touch the thermal head,

otherwise it shall be scraped, which

shall effect master making quality.

3. Put the new master roll onto the master bracket;

4. Three ways of installation:

Way Feed the master head (with mill finish adown)

between the printing roller and the thermal head, and push

the release lever to position Close. Close the scan table

and then master making can be started.

Way Put the thermal head release lever to Close

position, master mill finish adown, put the master under

micro switch, the master feed forward automatically, when

the distance is 5-10mm to the cutter, then use right hand to

press thermal head release lever, with left hand pull the

master to the feed entrance, close the scan table and then

master making can be started.

Way Put the thermal head release lever onto the

roller and the thermal head, feed the master forward until

release the thermal head release lever to Close position.

Press the cutter micro switch

Take out the cut master piece. Close the scan table and then

master making can be started.

28


31/92

BPS 201BPS 101

Warning!

The process of cutting master includes process of cutter

returning to its start point. Dont take out the master head piece

until the whole cutting procedure is completed. Its dangerous,please be careful.

5. Close the original receiving tray Close the scan flat

5. Installation of the Ink

1. Open the front door, press down the ink case switch;

2. Open the ink cover, make sure the ink mouthgroove connect toU mouth of the drum. Correct

installation;

29


32/92

work between the ink cartridge and the ink pump

BPS 101

3. Lock the ink holder tightened, or else the air will be

leaked in and the ink can not be well pumped in. The

nozzle can be adjusted by the adjusting bolt;

Notes

Do not keep the opening ink in the air

long time

4. Close the front door.

6. Placement of the Original

1. Open the original support tray ;

30


33/92

BPS 201

;BPS 101

BPS 201Open the scan cover

2. Place the original on the original tray, with image side adown.

Notes:

Zoom function is available for B5 and A5 size orginal when they areplaced in both vertical and horizontal direction. A3 and B4 original is

normally functioned only in vertical palcement.

31

Vertical placement Horizontal placement

Put the original in the middle and close to the left glass flat (The image side adown)

Note:Zoom function is available for A4,A5 and B5 size orginal when they are placed in

both vertical and horizontal direction. A3 and B4 original is normally functioned

only in vertical palcement


34/92

32

Vertical placement Horizontal placement

7. Choose Paper Size

Choose original size and copy size, eg. choose original size A4 and copy size A4, operation details as

below:

1. Check and make sure automatic zoom rate indicator light is on, if it isnt on, press the zoom rate key

for conversion


35/92

2Press the original size key to select A4, and the A4 indicator light is on.Press the copy size key to

select A4 and the indicator light A4 is on;

3. LCD display

33

Notes:

Europe

Paper size A(1%)B(1%)

A3 291mm 414mm

A4(R) 204mm 291mm

A4 291mm 204mm

B4 251mm 358mm

A5(R) 204mm 142mm

A5 142mm 204mm

B5 251mm 176mm

B5(R) 176mm 251mm

When use the paper smaller than original size without choosing paper size,

the inside of machine and the printout might be polluted.

If the paper size is not correctly set before making master, the printout will

not be correct.


36/92

8. Master Making

1. Press the master-making key and start master making;

Test print Master-making

Start

Stop

2. After master making, one sheet of test printout automatically follows;

3. Check whether the print image is in the center of the printout, if not, please check if the original and

the print paper are located in center.

Notes:

If print number is input before master making, after master making, the machine will directly print

according to the input number without test printout.

34


37/92

9. Printing

1Set the printing number by pressing numeric key;

35

1 2 3

4 5 6

7 8 9

0

Error Dada transmission

ResetClear

Notes

Max printing number set 9999 sheets.

If wrong number is input, press * key and set a new number.

2. Press the start key and start to print. The set print number decreases. The printouts are delivered onto

the receiving tray;

Test print Master-making

Start

Stop

3. The machine stops automatically after printing work is completed, and then the initial set printing

number will be displayed.

Notes

Press stop key if you need stop printing when the number is not zero, and press start key when

you need restart printing.


38/92

10. Turn off the power

1Turn the switch toOposition and turn off the power.

36

B P S 1 0 1 / 2 0 1


39/92

Chapter 3

Printing Operation

This chapter introduces how to operate the machine on all functions.

Enlargement and Reduction38

Automatic Zoom39

Free Zoom41

Density Adjusting42

Scanning Density Adjusting 42

Master-making Density Adjusting 43

Printing Density Adjusting43

Char/Char&Photo/ Photo Mode44

Two in one Master Making45

Book Mode47

37


40/92

Enlargement and Reduction

To set enlargement and reduction according to the sizes required.

Automatic Zoom RatePage 41

Machine choose the zoom rate automatically according to

the size of original and copies.

B4 document A4 printout

Free Zoom Rate Page40

Document printout

38


41/92

Automatic Zoom

Basic Print Process 1-6 stepPage 24-33

Incorrect Incorrect Correct

39

1. Set Automatic zoom rate light on. If Free zoom light is on, press conversion button to switch the

Automatic zoom light on;

2. Select original size by pressing Original document size button. For exampleA4. Press Copy

size to select. For exampleB5;

BPS 201BPS 101


42/92

3. LCD screen display:

Indication:

Make sure to return the settings back to standard zoom rate

According the steps 1-2 above select B4 for original documents size and B4 for copy size.

Press Reset key (All clear) back to original setting mode.

Press Master-Making key to start making master.

40


43/92

Free Room

1Press the zoom switch button and the Free Zoom indicator light is on. Press Original document

size button to select original paper size. E.g. A4.

2Press Free zoom button to enter free zoom interface.

50% 200%

100 %

100%

0

0- +

3Press cursor button - and + to set adjustment from 50% to 200%.

4 Press Confirm button to confirm.

50% 200%

110 %

41

BPS 101 BPS 201


44/92

5LCD Screen:

Back to Zoom Standard Mode

Press zoom switch button or reset button.

Press Master-making key to start master making.

Density Adjusting

Scan Density Adjusting

Adjust the scan density in 5 levels. There are 5 indicator lights, lighter, light, normal,

dark, and darker. Increase density if original document is too light, while decrease the

density if the original is too dark.

Choose density before master making.

Such as Set the density to light.

Press density adjusting buttons (including density-light button and density-dark button) as below in the

operation panel to adjust the density. Press density-light button when you want to set light scan density.

NoteWhen the left light is on, it is master-making density adjusting.

Indication

Back to scan density standard setting.

Press density adjusting buttons until the middle light is on.

42


45/92

Master-making Density Adjusting

5 steps for master making density, lighter, light, normal, dark, darker, which are indicated by 5 density

light.

1. Press density switch button (the middle button) as below, then the signal light will be on.

2Press density adjusting buttons to select the printing density.

3Back to select the scanning density after press density switch button, then the indicator light of

density switch is off.

Back to scanning density in standard settings.

Adjust according to step1---2 until the middle signal light is on.

Printing Density Adjusting

3 levels for printing density.

Adjust the printing density by increasing or decreasing the pressure of the pressure roller.

Turn it to high level, the printing density is dark.

Turn it to low level, the printing density is light.

43


46/92

Char/Char&Photo/ Photo mode

3 modes for this function

Char modefor text print.

Original: Text original

Photo modefor photo print.

Original: Photo original

Char&photofor print of original mixed with text and photo.

Original: Original mixed with text and photo

NoteSelect photo modes before master making.

For example, when the original is letter file, please choose char from the Photo Mode.

1. Press Photo Mode button in the display.

100%

0- + 878

2The screen displays Photo mode, and the indicator light of cursor keys is on. Press cursor keys

Up and Down keys to enter Char Mode. Press confirm key.

44


47/92

3Main screen display

Press Master-making button to make master.

Two-in-one Master Making

Under Two-in-one master making mode, 2 sheets of original can be plated into one sheet of master,

which is for book making.1 2 1 4 32

45

3

4

Documents(even number) Printout1 Printout2

1

2

3

4

5

2 1 4 3 5

Documents(odd number) Printout1 Printout2 Printout3


48/92

right

output except the standard paper size.

Only standard size paper is ensured the correct printout, You can not get the

BPS 201

Notes

Select Two-in-onemode before master making.

If 100% zoom rate is selected, set the original size equals to combined size of 2

sheets of original.

Under zoom rate other than 100%, please pay attention on the following points.

Make sure after zooming, the combined size of the 2 sheets of original is same as

the copy paper size.

1Press File Mode button to enter file mode;

100%

0- +

878

2. LCD screen displays File mode interface;

3. The indicator light of cursor keys is on, press Up Down buttons to choose Two-in-onemode or book

mode ,then press confirm button to confirm.

46

BPS 101


49/92

Book Mode(BPS 201)

Back to standard mode settings

Press File Mode, choose Single, and press Confirm button. Or

Press #(All clear) button, back to the standard mode settings.

Press Master-making button to start master making.

47

Indications

If the printout is incorrect, please check below:

The direction of original document.

Original size ,paper size and zoom rate.

Book mode

Under book mode, the book shadow or the shadow of folded original can be erased

automatically.

Middle shadow erase

The middle shadow with width of 15mm is erased.


50/92

1Press File Mode button;

100%

0- +

878

2LCD displays File mode;

3. Press cursor keys Up and Down to enter Book mode. Press Confirm to enter adjustment of

book middle shadow. Press cursor keys to adjust the book middle show as showed below.

Press Confirm button to confirm.

Indications

Back to standard mode setting:

Press File Mode to Single and press Confirm key. OrPress # (All clear) button, back to the standard settings.

Press Master-making button to start making master.

48


51/92

Chapter 4

Other Functions

This chapter describes other functions, such as : total count display, printing

speed, printing position adjustment, energy save, password, computer

connecting and other functions.

Counter Display Function50

Printing Speed Adjustment51

Printing Position Adjustment52

Power Save Function53

Confidential Function53

Computer Print Function54

The Instruction of Driver Installation55

49


52/92

Counter Display Function

1. Check and confirm the machine stops printing;

Notes

If the machine is printing, please press Stop button to stop printing.

2. Keep press Stop button, the total count of printing and master making will be displayed. See

following figure: Total count: 123, Total master making: 10. Loose Stop button, and the machine is

back to original mode.

50


53/92

Printing Speed Adjustment

5 levels of printing speed,55 ppm, 70 ppm, 85 ppm, 105 ppm, 120 ppm, the 5 indicating lights indicate

5 levels of printing speed. Default setting is 85ppm, which is indicated by the middle light. The indicate

light being on indicates the ongoing print speed.

Indications:

In case the continual jam happen on certain type of paper or certain image paper,

please increase or reduce the printing speed to solve this problem.

Under high speed printing, printout is light ,while under low speed, printout is dark.

The printing speed adjustment is effectual during printing process.

Reduce the speed

Press SpeedLbutton, indicator light is moving toward left, and the printing speed decreases.

Increase the speed

Press SpeedR button, indicator light is moving toward right ,the speed

increases.

Indications:

Two methods are used to set back to standard settings:

Press SpeedL button or SpeedR button until the middle indicator light is on.

Press # (All clear ) button to back to the standard mode.

51


54/92

Printing Position Adjustment

Printing position is still adjustable after master making. (Horizontal10mm )

Indications:

The printing position is not adjustable during the printing process.

Printing Position Adjustment

1. Press and keys indicated by the arrow as showed in the picture.

100%

0

- +

10- +

Indications:

Two ways of setting to turning back to the standard position:

Press + - keys until the printing position is 0mm.

Press reset button.

52


55/92

Power Save Function

1. After press Energy save button, LCD will become black without any display. All of the indicator

are off (Except save energy indicator light );

2. Press any button to exit from save energy mode.

Confidential Function

1. Press Set button and the indicator light of setting button is on. LCD displays Input

New Password;

2. Press the numeric keys to input 4 digit password, for example 1234, then press confirm button.

The screen displays Input password, and please input the password 1234. Press Confirm button

and the main display shows Ready.

RemarkIf the user wants to change the password, press set button, input new password and then

press Confirm button. Without any operation, the machine will automatically lock in three (3) minutes.

The machine shall save the password as memory after the password is set, so the password must be

input every time the machine is turned on. If the user wants to cancel the password setting, first turn off

the machine, then press Energy save button and Set button synchronously, and switch on the power.

In this way, the password is canceled. If the user wants to set a new password please follow the steps

above.

53


56/92

Computer Print Function

Note:

Please refer to the instruction of driver installation for cable connecting and setting.

Steps 17, the basic print process (Pages 24---33)

1. Plug the USB cable into the digital duplicator and the

computer;

2. Connect the USB cable;

3. Operate the print command according to the computer operation system.

Indications:

After master making and print are completed, more operations can be executed on the control panel.

54


57/92

The Instruction of Driver Installation

Please install the driven procedures according to the following steps:

Step 1:Plug the USB cable into the printer and the computer. Then Turn on the printer.

Step 2:The following dialog box appears:

Then click Next.

Step 3: The following dialog box appears:

55


58/92

Check the second option. Then click Next.

Step 4: The screen now displays Hardware Type. Select Printer, then click Next:


56


59/92

Click Have Disk.


Click Browse.

Step 7: Browse the path of the driver. The screen displays like following:

Select the file RDPrinter1.1 .inf, then click Open.

57


60/92


Click OK.

Step 9: The screen displays the Printer Name:

Select the proper printer, and then click Next.

Step 10: The following dialog box may appears:

58


61/92

Click Yes to continue installing the driver.


Click Next.

Step 12: The following dialog box may appears:

59


62/92

Click Yes to continue the installation.


Click Finish to complete the driver installation.

60


63/92

Notes: The driver procedure above applies to BPS 101,BPS 201,BPS 301 etc.

61

The installation instruction above takes Windows XP as an example. The installations are similar in

other operation system, and please just follow.

In case the installation fails please enter the printers in the control board, cancel RDPrinter1.1, click

right key of the Mouse on the blank and enter the server attributes, click driver procedure and cancel

RDPrinter1.1. And then reinstall according to the steps above.

Remarks: This driver procedure is normally operated under Windows2000 and WindowsXP.


64/92

Chapter 5

Consumables ReplacementThis chapter describes how to replenish supplies and dispose of them regularly.

Ink Replacement63

Master Replacement65

Taking out Disposal Master67

Printing Paper Replacement69

62


65/92

Only Blue ink is applied to this machine.

Ink Replacement

LCD displaysInk over, when the ink in the cartridge is used out. Please replace ink as follows.

Notes

1. Open front cover;

2. Press down the drum lock switch;

3. Take out the empty ink case;

63


66/92

4. Open the new ink cover, insert

the groove of the ink nozzle to be the

Umouth on the drum;

Notes

Dont keep the opening ink exposed in the air for long.

5. Support and push in the ink holder, and

lock it tightly. (The air is not allowed to

leak into the ink pump, otherwise the ink

can not be pumped in well).

6. Close the front cover.

64


67/92

Only Blue master is applied to this machine.

for BPS 101

Press down the scan lock lever, and push the scan flat . for BPS 201

Master Replacement

When the master roll is near to the end, LCD displays Master on Error orMaster over,

Please replace the master as follows.

Notes

1. Open the original paper receiving tray . ;

65


68/92

2. Press down thermal head releasing

lever to Open position;

Notes

Dont touch the thermal head,

otherwise the thermal head might

be scraped, which will effect

master making quality.

3. Rotate the master roll bracket, remove

the old master roll. Take out remaining

master jammed in the thermal head;

4. Please install the new master roll onto

the master bracket , and put it onto the

plating machine;

5. The smooth face of master should be

put downwards, extend the head ofmaster in the middle of the printing roller

and thermal head, lift down thermal head

releasing lever to Close;

66


69/92

Only Blue waste master core is applied to this machine.

for BPS 201for BPS 101

6. Press cutter micro switch ,take out the

wasted master piece under cutter;

Notes

Its back and forth in cutting.

Please do not touch paper cutting

to avoid danger.

7Close the original paper receiving tray and scanning flat .

Notes

Dont take out warning sticker on the cutter cover.Moving cutter may cause hurt.

Taking out Disposal Master

LCD shows Disposal box full.

Notes

1. Press the master disposal box switch,

open the disposal master box up to max;

67


70/92

2. Press the cover switch and the cover

will be automatically sprung up;

3. Grasp both ends of roll core to take it

out and remove the disposal master from

roll core;

NotesThere is ink on the roll core ,

please take care of your clothing.

4. Put the roll core into disposal master box;

5. Close disposal maser box top cover ,

and close that box.

68


71/92

Print Paper Replacement (for BPS 101/BPS 201)

69

1. If the machine is in printing state please stop printing by pressing Stop button;

2. Press down paper feeding tray switch,

lift down the feeding paper tray;

3. Take out paper;

Notes

Please take it out if paper is jamming on the feeding

Roller.

4. Replace print paper, feeding paper tray lifts up automatically after press Start key.


72/92

70

Chapter 6

Trouble Shooting

This chapter describes how to take care of problems that may arise with your

Rongda machines. Check the following information and the related items

before calling your authorized service department.

No Currency 72

Master Making/Printing Error73

LCD Display Error and Simple Solution74

Placement of Drum76

Paper Empty 77

Paper Jam78

Master Ejection Error 81

Master Load Error83


73/92

71

No Currency

If there is no power, please check as follows:

Whether the machine is switched on

Whether the machine is connceted to the power source

NoYes

Connect to

the power

sourceWhether the power is switched on

NoYes

Switch on

the power

Contact the

Service Dept


74/92

72

Master Making/Printing Error

If the machine can not proceed with master making/printing, please check as follows:

Whether there is indication from the indicator light

No Yes

Contact the Service Dept. Refer to the indicated error information of thenext interface


75/92

( for BPS 101/201

Place paper(BPS 101/BPS 201).

73

LCD Display Error and Simple Solution

Information Solution

Drum Lock Turn off the power and restart it. If the drum is still locked ,please contact ServiceDept.

Clamp Error Contact the Service Dept.

Clamp A Error Contact the Service Dept.

Clamp B Error Contact the Service Dept.

Clamp C Error Contact the Service Dept.

Unload Position

Error

Contact the Service Dept.

Space Motor Error Contact the Service Dept.

Cutter Motor Error Contact the Service Dept.

Fan Motor Error Contact the Service Dept.

Master-off Motor

Error

Check disposal master box feeding mouth jams or not, if not, contact Service Dept.

Power Safeguard Turn off the power and turn it on in 10 seconds. If it doesnt function, please contact

the Service Dept.

Ink Motor Error Contact the Service Dept.

Elevator Motor

Error

Contact the Service Dept.

Ink Over Please replace with new ink in time.

Load paper

Disposal box full Please close the box. Or the box might be full, please remove the wasted master.

No Drum Please relocate the drum.

Front Cover Open Please close front cover.


76/92

table, and clear it (for BPS 201).

Open paper load tray, and clear it (for BPS 101); Open scan

e master(for BPS 201)

Open paper receiving tray, and clear the master(for BPS 101)/Open

(for BPS 101/BPS 201)

for BPS 101

for BPS 101

for BPS 201

74

Top Cover Open Close the front cover.

Scan Cover Open Close scan cover.

File Jam Open Scan cover, take out the original paper.

No File

In 2 second this error shall be removed automatically removed.

Right Paper Jam Press down the drum start switch to check paper

exit or close the master disposal box.

Left Paper Jam Press the jog switch of paper feed tray and remove the jam paper.

Middle Paper Jam Press down the jog switch and take out the jam paper.

Master on Error

scan table, and clear th

Sundries in Feed Part

Master over Install the new master.

Outs Error Press drum micro switch and drive the drum to stop position, and

take out drum. Take out the remaining master from drum if

there is any.

Fake Ink Please replace with original ink, and press stop key to clear the

error.

Fake Master Please replace with original master, and press stopkey to clear

the error.

Ink Connect Error Press stop key to clear the error, and print again. If the error

remains, contact Service Dept.

Master Connect Error

Press stop key to clear the error, and print make master again. If

the error remains, contact Service Dept.

for BPS 101


77/92

75

Placement of Drum

Clear errors as follows:


2. Open drum lock switch ,take out drum;

3. Insert it again ,then press the lock switch;

4. Close front cover.


78/92

Paper Empty (for BPS 101/BPS 201)

76

Please add paper as below:

1. Place the paper onto the feed tray when feed tray elevator

stops descending;

2. Press Start key to stat printing , paper feed tray elevator

lifts automatically.


79/92

Press elevator switch and the elevator descends

Press Start key to print , paper feed tray lifts automatically.(BPS 101/BPS 201).3.

1. ;

77

Paper Jam

Left Paper Jam

Please take out paper as below:

2. Take out jammed paper on the paper feed roller;

Right Paper Jam

Please take out jam paper as below:

1. Press disposal master box switch, open that box

to max;

BPS 101/BPS 201


80/92

78

2. Press drum switch and take out paper jammed;

3. In case the print paper wraps onto the drum, please

press the micro switch of the drum to rotate the drum

until the head of the print paper is showed;

Warning

Please dont touch the drum andpressure roller when press microswitch.

Dont put your hand into machine

while the machine is running, avoiding

hurting.

4. Please take out that paper as press that drum

switch,remove that err;

Notes

Dont make your cloth dirty

5. Press drum switch continuously till the warning

stops. It shows drum is back to stop position;

6. Close disposal master box. Notes

In order to make quality printout, after cleaning

the warpping paper from the drum,please remake

the master.


81/92

79

Middle Paper Jam

Please take out paper as below:

1. Press disposal master box switch, and open that box to

max;

2. Press drum micro switch and take out paper jammed;

3. Keep pressing drum microswith until warning stops, which indicates drum is back to stop position;

4. Close master disposal box.


82/92

80

Master Ejection Error

Please clear error as below.

Warning

Dont press the drum surface by hands, otherwise your hands and clothing may get

stained, moreover the drum surface may get damaged and the printout quality might be

affected.

Be careful to locate the drum, and make sure to place it onto the level and steady flat.

1. Press drum micro switch until warning stops;


3. Open drum locked switch ,take out the drum;


83/92

81

4. Open the clamp and release the clamp edge;

Notes

Dont make your cloth dirty

5. Clear the master manually, rotate drum to its

stop position, and make sure the block in the

groove;

6. Hold the drum flatly, insert it into the machine,

and press down the drum lock switch;

7. Close front cover;

8. Press master-making key, start again.


84/92

82

Master Load Error (for BPS 101)

Please clear error as below:

1. Open original paper receive tray;

2. Clear extra master;

3. Close original paper receive tray;

4. Press master-making key ,and make master again.


85/92

83

Master Load Error (BPS 201)

Please clear error as below:

1. Press scan lock lever, and push scan table;

2. Clear extra master;

3. Close scan table;

4. Press master-making key ,and make master again.


86/92

84

Chapter 7

Specifications and Maintenance

Specifications86

Maintenance 87

Replace the Friction Pad 88

Replace the Paper Switch89

Replace/Clean the Paper Printing Roller90

Replace the Soft Screen 91


87/92

85

BPS 201BPS 101

Specifications

No. Name Digital Duplicator

1 Model B4 B4

2 Working principle Fully automatic digital scanning, thermal master making and printing

3 Processing mode Thermal master making

4 Time of first print 44S 50S

5 Resolution 300400DPI

6 Scanning Area 252mm355mm 285mm406mm

7 Original sizeMAX257mm364mmB4 297mm420mmA3

8 Image areaMAX 252355mm

9 Paper size MAX 297mm420mmA3

10 Paper weight 40g/-210g/11 Feed tray capacity

MAX950sheets70g/

950sheets70g/

12 Print speed 55-120ppm5 selections:557085105120

13 Regular Zoom Rate

Selection

70%81%87%94%100%standard115%122%141%

14 Zoom Rate Selection Automatic Zoom, Free zooming:50%200% at 1%

15 Print position

adjustment

10mm

16 Original Mode Text , picture , text & picture

17 Density control Lighter, light, normal, dark, darker

18 Ink supply Automatical

19 Master load Automatical

20 Master drop Automatical

21 Master size 270mm*495mm

Pack size

747mm*707mm*

747mm

Pack size

747mm*720mm*

847mm

22 Machine size

1320mm*625mm*

Work size

510mm

1320mm*625mm*

Work size

560mm


88/92

86

Maintenance

In the first paper feed section, the pressure between the paper rollers and the separator transports the

paper to second feed part. Therefore, after a number of sheets pass, the feed rollers will be worn so it

needs to be replaced.

1. Press the elevators microswitch and

the paper feed tray descends. Remove the

bolt on the connect knot on the right end

of the paper rollers shaft;

2. Move the paper rollers shaft until the

paper roller can be removed;

3. First remove the side rollers; take off

the screw on the main roller and then

remove the main roller. Replace with new

feed rollers and fix the screw;

4. Connect the paper roller shaft and the

connecting bolt. Make sure to fix screws.


89/92

e

87

Replace Friction Pad

The paper sheets are separated by the pressure produced by the friction pad against the paper roller. The

friction pad will be worn after a number of sheets are fed, and it need to be replaced.

1. Press the elevators microswitch and

the paper feed tray descends. Remove the

bolt on the connect knot on the right end

of the paper rollers shaft;

2. Move the paper rollers and the shaft,

take out the old friction pad and install a

new one;

3. The clearance between the paper

separation base unit and the paper feed

support plate can be adjusted by the

adjusting bolt.

Adjustment standard. Make no clearance between

the base unit and support plate, but the support

plate can be taken out from the base unit or taken

into it by hand easily.

4. Connect the paper roller shaft to the connecting bolt. Make sure to fix the screws.

e


90/92

88

Replace the Paper Switch

Paper switch controls the up-down movement of print roller. It is pushed open by the paper head.

It shall be worn after a number of paper printed and needs to be replaced.

1. Take out the drum, open the disposal

box and the white paper switch is

showed;

2. Disassemble the bolt on the paper

switch, and remove the paper switch;

3. Install the new paper switch, keep two

ends of switch to be parallel to the paper

plate below;

4. Close disposal box and place the drum back.


91/92

89

Replace/ Clean the Printing Roller

During paper is printed, the press between drum and print roller produce the pressure. Moreover, some

dust or speck comes in. In order to make sure printing is not effected, the print roller should be cleaned

or replaced when the print paper sheets reach a certain amount.

1. Open the front door, take out drum,

and you will see the print roller inside;

2. Take hold of the print roller and draw it away;

3. Clean the printing roller or replace

with a new roller.

Put one end of new print rollers shaft

into the hole controlled by spring plate,

and then insert the other end into the hole.

Put drum back and close the front door.


92/92

90

Replace the Soft Screen

1. Place drum steadily on the desktop or

floor. Discharge two press plates on the

upper frame of screen;

2. Remove lower frame of screen;

3Take out the soft screen from the drum,

and then remove upper and lower frames

of soft screen. Insert new screen from the

front side;

4Install new screen in reverse of the

steps of above.

Notes: The installed soft screen must be

leveled off and tightened.

Blue Operation Manual

Documents

instruction manual

c office equipment

national industry

national new product

blue solutions international

national torch program

items national patent

digital duplicators