bls_1725-23_1972.pdf

L i . 3 '.

n ^ r - 2 3

AREA WAGE SURVEYn d ia n a p o l is , In d ia n a , M e t r o p o l i t a n A r e a ,

O c t o b e r 1 9 7 1

Bulletin 1725-23

U.S. DEPARTMENT OF LABOR / Bureau of Labor StatisticsDigitized for FRASER http://fraser.stlouisfed.org/ Federal Reserve Bank of St. Louis

B U R E A U O F L A B O R S T A T IS T IC S R E G IO N A L O F F IC E SA L A S K A

Region I

1603-JFK Federal Building Government Center Boston, Mass. 02203 Phone: 223-6761 (Area Code 617)

Region II341 Ninth Ave., Rm. 1003 New York, N .Y . 10001 Phone: 971-5405 (Area Code 212)

R e g i o n I I I

406 Penn Square Building 1317 Filbert St.Philadelphia, Pa. 19107Phone: 597-7796 (Area Code 215)

Region IV Suite 5401371 Peachtree St. NE.Atlanta, Ga. 30309Phone: 526-5418 (Area Code 404)

Region V Region V I8th Floor, 300 South Wacker Drive 1100 Commerce St., Rm. 6B7Chicago, III. 60606 Dallas, Tex. 75202Phone: 3 5 3 -1880 (Area Code 312) Phone: 749-3516 (Area Code 214)

* Regions V II and V I I I w ill be serviced by Kansas C ity.* * Regions IX and X w ill be serviced by San Francisco.

Regions V II and V II IFederal Office Building 911 Walnut S t., 10th Floor Kansas C ity , Mo. 64106 Phone: 374-2481 (Area Code 816)

Regions IX and X450 Golden Gate Ave.Box 36017San Francisco, Calif. 94102 Phone: 556-4678 (Area Code 415)

Digitized for FRASER http://fraser.stlouisfed.org/ Federal Reserve Bank of St. Louis

AREA WAGE SURVEYB u lle t in 1 7 2 5 - 2 3F e b ru a ry 1 9 7 2

U.S. DEPARTMENT OF LABOR, J. D. Hodgson, Secretary BUREAU OF LABOR STATISTICS, Geoffrey H. Moore, Commissioner

T h e Indianapolis , Indiana, M etropo litan A rea , O c to b e r 1971

C O N T E N T S

P age

1. Introduction4. Wage trends fo r selected occupational groups

Tables:

3.5.

6.9.10. 12. 13.

1. Establishments and workers within scope of survey and number studied2. Indexes o f standard weekly sa laries and stra igh t-tim e hourly earnings for selected occupational

groups, and percents o f in crease fo r selected periods

A. Occupational earnings:A - l . O ffice occupations—men and womenA - 2. P ro fess ion a l and technical occupations—men and womenA - 3. O ffice , p ro fessiona l, and technical occupations—men and women combined A -4 . Maintenance and powerplant occupations A - 5. Custodial and m ateria l movement occupations

16. Appendix. Occupational descriptions

For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C., 20402 — Price 30 cents


Preface

The Bureau of Labor Statistics program of annual occupational wage surveys in m etropolitan areas is designed to provide data on occupational earnings, and establishment practices and supplementary wage provis ions. It yields detailed data by selected industry d ivision for each o f the areas studied, fo r geographic regions, and for the United States. A m ajor consideration in the program is the need for g rea ter insight into (1) the movement of wages by occupational category and sk ill le v e l, and (2) the structure and leve l of wages among areas and industry d ivisions.

At the end o f each survey, an individual area bulletin p re sents the resu lts. A fter completion of all individual area bulletins fo r a round o f surveys, two summary bulletins are issued. The firs t brings data fo r each of the m etropolitan areas studied into one bulletin. The second presents in form ation which has been projected from individual m etropolitan area data to re la te to geographic regions and the United States.

N inety areas currently are included in the program . In each area , inform ation on occupational earnings is collected annually and on establishment p ractices and supplementary wage provisions biennially.

This bulletin presents results of the survey in Indianapolis,. Ind. , in October 1971. The Standard M etropolitan Statistical A rea , as defined by the O ffice of Management and Budget (fo rm er ly the Bureau o f the Budget) through January 1968, consists o f Boone, Hamilton, Hancock, Hendricks, Johnson, M arion, M organ, and Shelby Counties. This study was conducted by the Bureau's regional o ffice in Chicago, 111. , under the general d irection of Lo is L . O rr , Assistant Regional D irec tor fo r Operations.

Note:

S im ilar reports a re availab le fo r other areas. (See inside back co ve r .)

Union wage rates, indicative o f preva iling pay leve ls in the Indianapolis area, are also availab le for building construction; printing; loca l-tran s it operating em ployees; local truck- d rive rs and helpers; and grocery store em ployees.


Introduction

This area is 1 of 90 in which the U.S. Department of Labor's Bureau of Labor Statistics conducts surveys of occupational earnings and related benefits on an areawide bas is .1

This bulletin presents current occupational employment and earnings inform ation obtained la rge ly by m ail from the establishments v is ited by Bureau fie ld economists in the last previous survey for occupations reported in that ea r lie r study. Persona l v is its w ere made to nonrespondents and to those respondents reporting unusual changes since the previous survey.

In each area, data are obtained from representative establishments within six broad industry d ivisions: Manufacturing; transportation, communication, and other public u tilities ; wholesale trade; re ta il trade; finance, insurance, and rea l estate; and serv ices . .M ajor industry groups excluded from these studies are government operations and the construction and extractive industries. Establishments having few er than a prescribed number of w orkers are omitted because they tend to furnish insufficient employment in the occupations studied to warrant inclusion. Separate tabulations are provided fo r each of the broad industry divisions which m eet publication criter ia .

These surveys are conducted on a sample basis because of the unnecessary cost involved in surveying a ll establishments. To obtain optimum accuracy at minimum cost, a greater proportion of large than of sm all establishments is studied. In combining the data, however, a ll establishments are given their appropriate weight. E s tim ates based on the establishments studied are presented, therefore, as relating to a ll establishments in the industry grouping and area, except fo r those below the minimum size studied.

Occupations and Earnings

The occupations selected fo r study are common to a va rie ty of manufacturing and nonmanufacturing industries, and are of the follow ing types: (1) O ffice c le r ica l; (2) professional and technical;(3) maintenance and powerplant; and (4) custodial and m ateria l m ovement. Occupational c lassification is based on a uniform set of job descriptions designed to take account of interestablishm ent variation in duties within the same job. The occupations selected fo r study are listed and described in the appendix. Unless otherwise indicated, the earnings data follow ing the job titles are fo r a ll industries com bined. Earnings data for some of the occupations listed and described, or fo r some industry divisions within occupations, are not presented in

1 Included in the 90 areas are four studies conducted under contract with the New York State Department of Labor. These areas are Binghamton (New York portion only) Rochester (office occupations only); Syracuse; and Utica-Rome. In addition, the Bureau conducts more limited area studies in 65 areas at the request of the Employment Standards Administration of the U.S. Department of Labor.

the A -s e r ie s tables, because either ( l ) employment in the occupation is too sm all to provide enough data to m erit presentation, or (2) there is poss ib ility of d isclosure of individual establishment data. Earnings data not shown separately fo r industry divisions are included in the overa ll c lassifica tion when a subclassification of secretaries or truck- d rive rs is not shown or in form ation to subclassify is not available.

Occupational employment and earnings data are shown for fu ll-tim e w orkers , i.e ., those h ired to work a regular w eekly schedule. Earnings data exclude prem ium pay fo r overtim e and fo r work on weekends, holidays, and late shifts. Nonproduction bonuses are ex cluded, but cos t-o f- liv in g allowances and incentive earnings are included. W here w eekly hours are reported, as fo r o ffice c le r ica l occupations, re ference is to the standard workweek (rounded to the nearest half hour) fo r which em ployees rece ive their regular straight- tim e sa laries (exclusive of pay fo r overtim e at regular and/or p re mium rates). A verage w eekly earnings fo r these occupations have been rounded to the nearest half dollar.

These surveys measure the le v e l of occupational earnings in an area at a particu lar tim e. Comparisons of individual occupational averages over tim e may not re fle c t expected wage changes. The averages fo r individual jobs are affected by changes in wages and employment patterns. F o r example, proportions of w orkers employed by high- or low -wage firm s m ay change or high-wage workers may advance to better jobs and be replaced by new workers at lower rates. Such shifts in employment could decrease an occupational average even though most establishments in an area increase wages during the year. Trends in earnings of occupational groups, shown in table 2, are better indicators of wage trends than individual jobs within the groups.

The averages presented re flec t composite, areawide es timates. Industries and establishments d iffe r in pay leve l and job staffing and, thus, contribute d ifferen tly to the estim ates for each job. The pay relationship obtainable from the averages may fa il to re flec t accurately the wage spread or d ifferen tia l maintained among jobs in individual establishments. S im ilarly, d ifferences in average pay levels fo r men and women in any o f the selected occupations should not be assumed to re fle c t d ifferences in pay treatm ent of the sexes within individual establishments. Other possib le factors which may contribute to d ifferences in pay fo r men and women include: D ifferencesin p rogression within established rate ranges, since only the actual rates paid incumbents are co llected ; and d ifferences in specific duties perform ed, although the w orkers are c lass ified appropriately within the same survey job description. Job descriptions used in classify ing

1


2

em ployees in these surveys are usually m ore genera lized than those used in individual establishments and allow fo r m inor d ifferences among establishments in the specific duties perform ed.

Occupational employment estim ates represent the total in a ll establishments within the scope o f the study and not the number actua lly surveyed. Because of d ifferences in occupational structure among establishm ents, the estimates o f occupational employment obtained from the sample o f establishments studied serve only to indicate the re la tive im portance o f the jobs studied. These d ifferences in occupational structure do not a ffect m a teria lly the accuracy of the earnings data.

Establishment P ra c tic es and Supplementary Wage Prov is ions

Tabulations on selected establishment practices and supplem entary wage provisions (B -s e r ie s tables) are not presented in this bulletin. Inform ation fo r these tabulations is collected biennially. These tabulations on minimum entrance sa laries fo r inexperienced women o fficew orker s; shift d ifferen tia ls ; scheduled weekly hours; paid holidays; paid vacations; and health, insurance, and pension plans are presented (in the B -se r ie s tables) in previous bulletins fo r this area.


3

T a b le 1. E stab lishm ents and w o rk e rs w ithin scope of su rvey and nu m b er studied in In d ian apo lis , Ind .,1 by m a jo r industry d iv is ion ,2 O c to b e r 1971

Minimum Number of establishments Workers in establishments

Industry divisionemployment in establish- Within scope

of study3

Within scope of study4ments in scope

of studyStudied

Number PercentStudied

A ll divisions______________________________ _ 848 210 211,913 100 134,493

Manufacturing.._______________________ __________ 50 298 87 113,257 53 82,718Nonmanufacturing_______________________________

Transportation, communication, and550 123 98,656 47 51, 775

other public utilities 5_________________ ____ 50 76 22 24,631 12 17,532Wholesale trade 6____________________________ 50 118 22 10,877 5 3, 759Retail trade__________________________________ 50 177 36 35,624 17 16,954Finance, insurance, and real estate 6______ 50 88 19 18,661 9 9, 801Services 6 7___ ________________________ 50 91 24 8, 863 4 3, 729

1 The Indianapolis Standard Metropolitan Statistical Area, as defined by the Office of Management and Budget (form erly the Bureau of the Budget) through January 1968, consists of Boone, Hamilton, Hancock, Hendricks, Johnson, Marion, Morgan, and Shelby Counties. The "workers within scope of study" estimates shown in this table provide a reasonably accurate description of the size and composition of the labor force included in the survey. The estimates are not intended, however, to serve as a basis of comparison with other employment indexes for the area to measure employment trends or levels since (1) planning of wage surveys requires the use of establishment data compiled considerably in advance of the payroll period studied, and (2) small establishments are excluded from the scope of the survey.

2 The 1967 edition of the Standard Industrial Classification Manual was used in classifying establishments by industry division.3 Includes all establishments with total employment at or above the minimum limitation. A ll outlets (within the area) of companies in such

industries as trade, finance, auto repair service, and motion picture theaters are considered as 1 establishment.4 Includes all workers in all establishments with total employment (within the area) at or above the minimum limitation.5 Abbreviated to "public utilities" in the A -series tables. Taxicabs and services incidental to water transportation were excluded. Indianapolis'

gas utility is municipally operated and is excluded by definition from the scope of the study.6 This industry division is represented in estimates for "a ll industries" and "nonmanufacturing" in the Series A tables. Separate presentation

of data for this division is not made for one or more of the following reasons: (1) Employment in the division is too small to provide enough data tom erit separate study, (2) the sample was not designed initially to permit separate presentation, (3) response was insufficient or inadequate to permit separate presentation, and (4) there is possibility of disclosure of individual establishment data.

7 Hotels and motels; laundries and other personal services; business services; automobile repair, rental, and parking; motion pictures; nonprofit membership organizations (excluding religious and charitable organizations); and engineering and architectural services.

Almost three-fifths of the workers within scope of the survey in the Indianapolis area were employed in manufacturing firm s. The following presents the major industry groups and specific industries as a percent of all manufacturing:

Industry groups

Transportation equipment------- 30Electrical equipment and

supplies™.--------------------------- 17Machinery, except electrical___10Chemicals and allied

products______________________ 8Fabricated metal products____ 7Food and kindred products____ 7Printing and publishing________ 5

Specific industries

A ircraft and parts_______________ 15Motor vehicles and

equipment __ 15Radio and TV receiving

equipment_____________________ 8Drugs____________________________ 7General industrial

machinery_____________________ 7Communication equipment______ 6

This information is based on estimates of total employment derived from universe materials compiled prior to actual survey. Proportions in various industry divisions may differ from proportions based on the results of the survey as shown in table 1 above.


W ag e T ren d s fo r S e le c te d O ccupational G roups

Presen ted in table 2 are indexes and percentages of change in average sa laries o f o ffice c le r ica l w orkers and industrial nurses, and in average earnings of selected plantworker groups. The indexes are a m easure of wages at a given tim e, expressed as a percent of wages during the base period. Subtracting 100 from the index yields the percentage change in wages from the base period to the date of the index. The percentages of change or increase relate to wage changes between the indicated dates. Annual rates of in crease, where shown, re fle c t the amount o f increase fo r 12 months when the tim e period between surveys was other than 12 months. These computations w ere based on the assumption that wages increased at a constant rate between surveys. These estim ates are m easures of change in a v e r ages fo r the area; they are not intended to m easure average pay changes in the establishments in the area.

Method of Computing

Each of the follow ing key occupations within an occupational group was assigned a constant weight based on its proportionate em ployment in the occupational group:

Office clerical (men and women): Bookkeeping-machine

operators, class B Clerks, accounting, classes

A and BClerks, file, classes

A , B, and C Cleiks, order Clerks, payroll Comptometer operators Keypunch operators, classes

A and BOffice boys and girls

Office clerical (men and women)— Continued

SecretariesStenographers, general Stenographers, senior Switchboard operators, classes

A and BTabulating-machine operators,

class BTypists, classes A and B

Industrial nurses (men and women): Nurses, industrial (registered)

Skilled maintenance (men): Carpenters Electricians Machinists MechanicsMechanics (automotive)PaintersPipefittersTool and die makers

Unskilled plant (men):Janitors, porters, and cleaners Laborers, material handling

The average (mean) earnings fo r each occupation w ere m ultiplied by the occupational weight, and the products fo r a ll occupations in the group w ere totaled. The aggregates fo r 2 consecutive years w ere related by dividing the aggregate fo r the later year by the a gg re gate fo r the e a r lie r year. The resultant re la tive , less 100 percent,

shows the percentage change. The index is the product of multiplying the base year re la tive (100) by the re la tive fo r the next succeeding year and continuing to m ultiply (compound) each yea r 's re la tive by the previous yea r 's index.

F o r o ffice c le r ica l w orkers and industrial nurses, the wage trends relate to regu lar w eekly sa laries fo r the norm al workweek, exclusive of earnings for overtim e. F o r plantworker groups, they measure changes in average stra igh t-tim e hourly earnings, excluding prem ium pay fo r overtim e and fo r work on weekends, holidays, and late shifts. The percentages are based on data fo r selected key occupations and include most of the num erically important jobs within each group.

Lim itations of Data

The indexes and percentages of change, as m easures of change in area averages, are influenced by: ( l ) genera l sa lary andwage changes, (2) m erit or other increases in pay rece ived by individual w orkers while in the same job, and (3) changes in average wages due to changes in the labor fo rce resulting from labor turnover, fo rce expansions, fo rce reductions, and changes in the p roportions of w orkers employed by establishments with d ifferen t pay leve ls . Changes in the labor fo rce can cause increases or decreases in the occupational averages without actual wage changes. It is conceivable that even though a ll establishments in an area gave wage increases, average wages may have declined because low er-paying establishments entered the area or expanded their work fo rces . S im ila rly , wages may have rem ained re la tive ly constant, yet the averages for an area m ay have risen considerably because h igher-paying establishments entered the area.

The use of constant employment weights elim inates the effect of changes in the proportion of w orkers represented in each job included in the data. The percentages o f change re flec t only changes in average pay fo r stra ight-tim e hours. They are not influenced by changes in standard work schedules, as such, or by prem ium pay fo r overtim e. W here necessary, data w ere adjusted to rem ove from the indexes and percentages of change any significant effect caused by changes in the scope of the survey.

4


T a b le 2 . In d ex es o f s tandard w e e k ly sa laries and s tra ig h t-tim e hourly ea rn ing s fo r se lec ted occupationa l g roups in In d ian apo lis , Ind., O c to b e r 1 9 7 0 and O c to b e r 1 9 71 , and p ercen ts o f in c re a s e fo r s e le c te d periods

Period

A ll industries Manufacturing

Office clerical

(men and women)

Industrial nurses

(men and women)

Skilledmaintenance

trades(men)

Unskilled plant-

workers (men)

Office clerical

(men and women)

Indu strial nurses

(men and women)

Skilledmaintenance

trades(men)

Unskilledplant-

workers(men)

Indexes (December 1967=100)

October 1970____________________________________ 117.8 124.5 120.9 124.2 121.0 124.6 120.4 122.4October 1971____________________________________ 123.7 134.3 129.0 135.4 128.1 134.7 127.7 133.3

Percents of increase

January I960 to December I960:11-month increase___________________________ 2.5 4.2 2.9 2.3 2.3 4.0 2.7 3.3Annual rate of increase_____________________ 2.7 4.6 3.2 2.5 2.5 4.4 2.9 3.6

December I960 to December 1961_____________ 1.8 3.0 2.6 .9 1.5 3.4 2.6 2.0December 1961 to December 1962----------------- 2.8 3.9 4.5 3.0 3.0 3.8 4.0 3.5December 1962 to December 1963----------------- 2.3 3.3 4.2 5.2 3.2 2.7 3.7 6.1December 1963 to December 1964_____________ 3.4 4.1 1.9 3.5 2.7 4.4 1.5 2.2December 1964 to December 1965----------------- 1.3 3.9 3.7 4.7 .7 2.5 3.8 1.7December 1965 to December 1966_____________ 4.5 5.1 4.6 4.5 4.1 5.9 4.5 3.6December 1966 to December 1967----------------- 5.0 6.9 6.7 3.7 4.8 5.9 6.7 7.2December 1967 to December 1968----------------- 6.6 9.1 7.2 7.4 6.4 9.0 7.0 7.6December 1968 to October 1969:

10-month increase___________________________ 4.2 5.5 3.7 4.1 5.0 5.8 3.6 3.8Annual rate increase________________________ 5.1 6.6 4.5 4.9 6.0 7.0 4.3 4.6

October 1969 to October 1970----------------------- 6.0 8.2 8.7 11.1 8.3 8.1 8.6 9-6October 1970 to October 1971----------------------- 5.0 7.9 6.7 9.0 5.9 8.1 6.1 8.9


6

A. Occupational earnings

T a b l e A - 1 . O f f i c e o c c u p a t i o n s — m e n a n d w o m e n

(Average straight-time weekly hours and earnings for selected occupations studied on an area basis by industry division, Indianapolis, Ind., October 1971).

Sex, occupation, and industry division weekly

(standard)

Weekly earnings 1 ( standard)

Middle range2

Number of workers receiving straight-time weekly earnings of—

andunder

» * * « i * * * i $ t $ $ $ $ $ $ i70 80 90 100 11 0 120 130 140 150 160 170 180 190 200 210 220 230 240 250

80 90 100 11 0 120 130 140 150 160 170 180 190 200 210 220 230 240 250

MEN

CLERKS, ACCOUNTING, CLASS A --MANUFACTURING --------------NONMANUFACTURING -----------

CLERKS, ACCOUNTING, CLASS B --NONMANUFACTURING -----------

CLERKS, OR D E R ------------------MANUFACTURING --------------NONMANUFACTURING -----------

CLERKS, PAYROLL ---------------

MESSENGERS (OFFICE BOYS) -----MANUFACTURING --------------NONMANUFACTURING -----------

TABULATING-MACHINE OPERATORS, CLASS A -----------------------

TABULATING-MACHINE OPERATORS,CLASS B -----------------------

MANUFACTURING --------------NONMANUFACTURING -----------

TABULATING-MACHINE OPERATORS, CLASS C -----------------------

1386672

4335

16841

127

14532

11 3

40 .0 3 9 . 540 .0

40 .040 .0

40 .040 .040 .0

3 9 .540 .03 9.0

3 9 .53 9 . 53 9 . 5

1 5 6 .5 01 7 3 . 5 01 4 1 .0 0

13 5.0 013 6.00

1 4 2 .5 015 4 .0 013 8 .5 0

9 3 .50 1 1 4 . 5 0

8 7.5 0

15 5 .0 017 0 .0 0 1 3 7 . 5 0

1 5 5 . 5 01 7 7 . 5 013 8.00

1 4 2 .5 01 5 1 . 5 0

140 .501 5 2 .5 01 3 7 .0 0

85.0010 7 . 5 0

8 3.50

150 .0017 9 .0 0 1 4 3 .5 0

$ S1 2 5 . 0 0 - 18 7.001 4 1 . 0 0 - 203.001 2 0 . 5 0 - 16 7 .0 0

9 9 . 5 0 - 1 6 6 .5 09 8 . 5 0 - 170.00

1 2 4 . 0 0 - 15 8 .5 01 2 8 . 5 0 - 18 4.50 12 3- .00-150.00

1 1 9 . 0 0 - 16 4 .5 0

8 0 .5 0 - 98.508 6 .0 0 - 14 9.0 07 7 . 0 0 - 89.50

150 .00-230 .00

1 3 2 . 5 0 - 185.00 1 4 2 . 0 0 - 1 9 9 . 0 01 2 2 . 5 0 - 1 5 2 .5 0

9 6 .0 0 - 1 6 4 . 5 0

122

10

32

201

19

5 163 12 15

11

2 352 7

1912

7

231

22

*25

27

9 12 2 22 9 12 - - 51 7 2 7 9 12 - - 5 -8 5 - 1 5 - - - - - -

6 5 8 - - - - - - -6 5 8 - - - - - - -

15 5 7 1 6 5 4 2 - - -8 2 - 5 4 2 2 - - - 7 3 7 1 1 1 2 - - - -

1 2 - 2 - 1 1 - 1 1

7 3 — — — — — — — —5 3 - - - - - - - -2 - - - - - - - - -

1 5 4 - 1 - 3 2 3 1

5 3 5 3 5 6 - - - - - 2 3 3 5 6 - - - - 5 1 2 — — — — — — —

BILLERS, MACHINE (BILLINGMACHINE) -------- *-------

NONMANUFACTURING -----PUBLIC UTILITIES ---

1 088427

40 .040 .040 .0

1 1 5 . 5 0120.001 7 7 . 5 0

9 4.5010 5 .5 01 7 9 .5 0

9 1 . 5 0 - 1 3 7 . 0 09 1 . 0 0 - 1 7 6 . 5 0

1 7 7 . 0 0 - 1 8 7 . 5 0

4 9 2 43 15 64 9 2 26 13 3

422

14 11 - - - - - - -14 1 1 — — — - _ —14 1 1 — - - - - - -

BILLERS, MACHINE (BOOKKEEPING MACHINE) ------- ------------------- 60 40 .0 101.00 102.00 9 7 .0 0 - 1 0 4 . 5 0 3 4 12 31 10

BOOKKEEPING-MACHINE OPERATORS,CLASS A -----------------------

NONMANUFACTURING -----------5839

40 .040 .0

1 1 5 . 0 0 109.001 1 1 . 0 0 1 0 7 .5 0

1 0 5 . 0 0 - 14 5 .0 01 0 0 . 0 0 - 14 6 .0 0

8 2 23 4 18 2 17 1 1

126

44

BOOKKEEPING-MACHINE OPERATORS,CLASS B ----------------------------

NONMANUFACTURING ----------------RETAIL TRADE ------------------

1351 1 7

35

40.040 .040 .0

103.00101.00

9 9 .5 0

10 6.0010 5.00

92 .5 0

8 8 . 5 0 - 1 1 2 . 5 08 9 . 0 0 - 1 1 2 . 0 08 6 .0 0 - 1 2 1 . 5 0

4 37 11 33 31 10 7 24 32 10 33 27 10 14 13 4 1 2 10 1

CLERKS, ACCOUNTING, CLASS AMANUFACTURING -----------NONMANUFACTURING --------

PUBLIC UTILITIES -----RETAIL TRADE ----------

669174495

80163

3 9 . 540 .03 9.040 .040 .0

1 2 4 .5 01 4 2 .5 0 11 8 . 0 0140 .501 1 3 . 5 0

1 1 9 .0 013 0 .5 01 1 7 . 0 01 3 9 .5 01 1 3 . 0 0

1 0 5 . 0 0 - 13 6 .5 01 1 3 . 5 0 - 17 3.0 01 0 3 . 0 0 - 13 0 .501 2 6 . 5 0 - 14 4 .5 0

9 9 . 5 0 - 1 2 3 . 5 0

75 108 133 10415 21 22 2860 87 1 1 1 76

- 3 9 1625 32 23 39

6513 521415

48113725

3

15 217 98 121 -6 3

16 16 17 1211 5 17 12

5 111 11

33

See footnotes at end of tables.


7

T a b l e A - 1 . O f f i c e o c c u p a t i o n s — m e n a n d w o m e n ----- C o n t i n u e d

(Average straight-time weekly hours and earnings for selected occupations studied on an area basis by industry division, Indianapolis, Ind., October 1971)

Weekly earnings 1 (standard) Number of workers receiving straight-time weekly earnings o

Sex, occupation, and industry division

WOMEN - CONTINUED

CLERKS, ACCOUNTING, CLASS B ----------MANUFACTURING ----------------------------NONMANUFACTURING -----------------------

PUBLIC U T ILITIES --------------------RETAIL TRADE --------------------------

CLERKS, F IL E , CLASS A --------------------NONMANUFACTURING-----------------------

CLERKS, F ILE , CLASS B --------------------NONMANUFACTURING -----------------------

PUBLIC UTILITIES --------------------RETAIL TRADE --------------------------

CLERKS, F ILE , CLASS C --------------------MANUFACTURING ----------------------------NONMANUFACTURING -----------------------

CLERKS, ORDER ---------------------------------MANUFACTURING ----------------------------NONMANUFACTURING-----------------------

CLERKS, PAYROLL -----------------------------MANUFACTURING----------------------------NONMANUFACTURING -----------------------


COMPTOMETER OPERATORS --------------------MANUFACTURING --------------------------------NONMANUFACTURING -----------------------

RETAIL TRADE --------------------------

KEYPUNCH OPERATORS, CLASS A ----------MANUFACTURING ----------------------------NONMANUFACTURING -----------------------

PUBLIC UTILITIES --------------------RETAIL TRADE --------------------------

KEYPUNCH OPERATORS, CLASS B ----------MANUFACTURING ----------------------------NONMANUFACTURING -----------------------

PUBLIC U T ILIT IES --------------------RETAIL TRADE --------------------------

MESSENGERS (OFFICE GIRLS) -------------MANUFACTURING ----------------------------NONMANUFACTURING -----------------------

PUBLIC UTILITIES --------------------

SECRETARIES ------------------------------------MANUFACTURING ----------------------------NONMANUFACTURING -----------------------


SECRETARIES, CLASS A ------------------MANUFACTURING ----------------------------NONMANUFACTURING -----------------------

$ $ $ t $ * $ $ t t $ S * t t S % $ 1 -------- iNumberof

Average 60 65 70 80 90 100 no 120 130 140 150 160 170 180 190 200 210 220 230 240woikeis hours1 Mean2 Median2 Middle range2 and

(standard) tinder

65 70 80 90 100 no 120 130 140 150 160 170 180 190 200 210 220 230 240 250

$ $ $ $1,138 3 9 .5 9 7 .5 0 9 4 .0 0 8 5 .0 0 - 1 0 5 .0 0 - 15 96 341 279 193 86 44 23 18 22 5 11 5 — — — — — -

391 4 0 .0 110 .50 10 7 .50 9 4 .0 0 - 1 2 2 .0 0 - - 7 58 94 52 76 37 17 15 22 5 3 5 - - - - - -747 3 9 .5 9 1 .0 0 8 9 .5 0 8 3 .0 0 - 99 .0 0 - 15 89 283 185 141 10 7 6 3 - - 8111 4 0 .0 9 7 .0 0 8 9 .5 0 8 4 .5 0 - 1 0 1 .0 0 - - 16 42 23 16 - - 6 - - - 8193 4 0 .0 8 6 .5 0 8 5 .0 0 7 8 . 0 0 - 99 .50 - 15 44 58 31 43 1 1130 3 9 .0 102.00 100 .50 8 7 .5 0 - 1 0 4 .5 0 - - - 41 20 49 3 5 1 5 _ 1 2 3 - - - - _ -114 3 8 .5 9 8 .0 0 100.00 8 6 .5 0 - 1 0 4 .0 0 - - ~ 38 18 45 3 5 1 4

292 3 9 .0 9 3 .5 0 87 .00 8 1 . 5 0 - 93 .50 _ 11 41 137 59 7 2 - - - 24 9 2275 3 9 .0 9 3 .5 0 87 .00 8 1 . 5 0 - 93 .50 - 11 40 127 55 6 2 - - - 24 8 2

71 4 0 .0 119 .00 109.00 8 2 .5 0 - 1 5 8 .5 0 - - 13 15 4 5 - - - - 24 8 241 4 0 .0 8 3 .5 0 8 5 .5 0 7 4 . 0 0 - 88 .5 0 - - 13 25 - 1 2

500 3 8 .5 8 1 .5 0 7 8 .0 0 7 4 . 5 0 - 85 .0 0 20 35 270 82 34 28 18 1 11 - - 152 4 0 .0 89 .50 9 2 .5 0 7 6 .0 0 - 1 0 0 .5 0 - 4 14 2 19 10 2 - - - - 1

448 3 8 .0 8 0 .5 0 7 7 .5 0 7 4 . 0 0 - 83 .0 0 20 31 256 80 15 18 16 1 11397 4 0 .0 100 .50 9 5 .0 0 8 8 .5 0 - 1 0 7 .0 0 - _ 38 75 110 90 34 13 13 5 7 9 2 1 - - _ - - _202 4 0 .0 106.00 100.00 9 0 .0 0 - 1 1 8 .5 0 - - 9 41 51 36 18 13 12 5 7 9 l195 4 0 .0 9 4 .5 0 9 3 .5 0 8 5 .5 0 - 1 0 3 .0 0 - - 29 34 59 54 16 ~ 1 “ - 1 1 * - - “ -

277 3 9 .5 128 .50 123 .00 1 0 3 .0 0 -1 4 8 . 0 0 - 2 3 7 22 68 25 43 18 24 19 4 20 9 6 6 - - 1 _162 4 0 .0 131 .50 125 .50 1 0 4 . 5 0 -1 4 8 .0 0 - - - - 12 35 17 31 16 15 11 4 4 4 6 6 - - 1 -115 39 .5 123 .50 112 .50 1 0 1 . 5 0 -1 5 0 .5 0 - 2 3 7 10 33 8 12 2 9 8 - 16 5 - - - - -

31 4 0 .0 15 7 .00 17 5 .50 1 4 5 . 0 0 -1 7 8 .0 0 - - - - - 2 1 2 1 2 7 - 1647 39 .5 106 .50 107 .00 9 1 .5 0 - 1 2 1 .5 0 - 3 7 8 11 6 6 694 4 0 .0 103 .00 9 6 .0 0 8 5 .5 0 - 1 1 9 .0 0 _ 1 11 25 19 8 9 6 6 2 2 _ 1 4 _ _ _ _ _ _36 4 0 .0 119 .00 117 .50 8 9 .5 0 - 1 3 7 .0 0 - - - 10 4 3 2 4 6 - 2 - 1 4 - - - - - -58 4 0 .0 9 3 .0 0 9 3 .0 0 8 1 .5 0 - 1 0 4 .0 0 - 1 11 15 15 5 7 2 - 252 4 0 .0 9 1 .0 0 9 1 .0 0 8 0 .5 0 - 1 0 0 .0 0 - 1 11 14 14 4 7 1

558 3 9 .5 115 .50 111 .50 1 0 2 .0 0 -1 2 3 . 0 0 - _ - 19 85 153 132 75 27 35 1 5 4 13 9 - _ _ - -178 4 0 .0 12 6 .50 117 .00 1 0 8 .0 0 -1 3 4 . 0 0 - - - 2 15 37 45 31 13 3 1 5 4 13 9 - - - - -380 39 .0 110.00 108 .50 1 0 0 .5 0 -1 1 9 . 5 0 - - - 17 70 116 87 44 14 32124 4 0 .0 116 .50 111.00 1 0 2 .5 0 -1 4 2 . 5 0 - - - - 18 41 26 5 3 31

25 39 .5 108 .50 113 .50 9 4 .0 0 - 1 2 2 .5 0 - - “ 9 2 6 8 V-

629 3 9 .5 105 .00 9 4 .5 0 8 7 .0 0 - 1 1 1 .5 0 - _ 22 193 168 84 35 10 24 16 19 It 39 2 i _ - - _ _220 3 9 .5 121.00 113 .00 9 6 .5 0 - 1 4 9 .5 0 - - - 30 40 38 21 4 18 16 19 16 15 2 i - - - - -409 39 .5 9 6 .0 0 9 1 .0 0 8 5 . 0 0 - 99 .5 0 - - 22 163 128 46 14 6 6 - - - 24

58 4 0 .0 127 .00 110 .50 9 1 .5 0 - 1 7 2 .0 0 - - 1 10 16 2 4 1 - - - - 24100 4 0 .0 9 3 .5 0 9 1 .0 0 8 5 .5 0 - 1 0 2 .5 0 - - 10 36 25 18 5 6161 39 .0 85 .00 8 4 .0 0 7 5 . 5 0 - 94 .5 0 - 14 52 36 42 10 2 528 4 0 .0 88.00 9 0 .5 0 7 8 . 5 0 - 9 8 .5 0 - 1 9 4 9 4 1

133 3 9 .0 8 4 .5 0 83 .00 7 4 .5 0 - 93 .5 0 - 13 43 32 33 6 1 531 4 0 .0 9 8 .0 0 9 8 .0 0 9 0 .0 0 - 1 0 5 .0 0 - 3 5 12 5 1 5

2 ,725 39 .5 148 .00 140 .00 1 1 6 . 5 0 -1 7 7 . 5 0 _ - 1 65 145 264 327 292 262 226 196 160 142 131 104 115 133 83 43 181,500 4 0 .0 165 .00 164 .50 1 3 1 .5 0 -2 0 0 . 5 0 - 1 13 67 77 9 9 103 104 127 115 108 113 101 91 9 9 124 82 42 161,225 3 9 .0 127 .50 123 .00 1 0 9 . 5 0 -1 4 2 . 0 0 - - - 52 78 187 228 189 158 9 9 81 52 29 30 13 16 9 1 1 2

159 4 0 .0 160 .00 158 .50 1 3 4 . 5 0 -1 8 8 . 0 0 - - - - 3 7 12 12 18 11 20 13 11 18 8 15 8 1 1 1216 4 0 .0 121.00 119 .50 1 0 6 . 5 0 -1 4 0 .0 0 - - 17 11 40 42 38 15 20 21 3 7 2 - “ - - - -

192 39 .5 17 2 .00 16 4 .50 1 3 6 . 0 0 -2 0 7 . 0 0 - - - - - - 16 22 15 12 26 18 15 14 4 5 5 6 11 1499 4 0 .0 187 .50 17 4 .00 1 4 0 .0 0 -2 3 8 . 0 0 - - - - - - 4 12 9 2 9 10 6 4 i 1 4 6 10 1293 3 9 .5 156 .00 156 .50 1 3 2 .5 0 -1 7 7 . 5 0 “ “ “ “ * “ 12 10 6 10 17 8 9 10 3 4 1 ” 1 2

2 5 0

andover

181 8



8

T a b l e A - 1 . O f f i c e o c c u p a t i o n s — m e n a n d w o m e n ----- C o n t i n u e d

(Average straight-time weekly hours and earnings for selected occupations studied on area basis by industry division, Indianapolis, Ind., October 1971)

S ex , occupation, and industry division

WOMEN - CONTINUED

SECRETARIES - CONTINUED

SECRETARIES, CLASS B --------------------MANUFACTURING -------------------------------NONMANUFACTURING --------------------------

PUBLIC UTILITIES ----------------------RETAIL TRADE -----------------------------

SECRETARIES, CLASS C --------------------MANUFACTURING -------------------------------NONMANUFACTURING -------------------------


SECRETARIES, CLASS D --------------------MANUFACTURING -------------------------------NONMANUFACTURING -------------------------


STENOGRAPHERS, GENERAL --------------------MANUFACTURING -------------------------------n o n m a n u f a c t u r in g ---------------------------

PUBLIC UTILITIES ----------------------

STENOGRAPHERS, SENIOR ----------------------MANUFACTURING -------------------------------NONMANUFACTURING --------------------------


SWITCHBOARD OPERATORS, CLASS A ------MANUFACTURING -------------------------------NONMANUFACTURING--------------------------

SWITCHBOARD OPERATORS, CLASS B ------NONMANUFACTURING --------------------------

RETAIL TRADE -----------------------------

SWITCHBOARD OPERATOR-RECEPTIONISTS-MANUFACTURING -------------------------------NONMANUFACTURING --------------------------


TABULATING-MACHINE OPERATORS,CLASS B ---------------------------------------------

NONMANUFACTURING --------------------------

TRANSCRIBING-MACHINE OPERATORS,GENERAL ---------------------------------------------

NONMANUFACTURING --------------------------

TYPISTS, CLASS A -------------------------------m a n u f a c t u r i n g -------------------------------NONMANUFACTURING --------------------------


TYPISTS, CLASS B -------------------------------MANUFACTURING -------------------------------NONMANUFACTURING --------------------------

Weekly earnings 1 (standard) Number of w o rk e rs re cei ving s tra ight -t im e weekly earnings of—

Numbert i s t s $ s S % $ t * $ $ $ i $ $ $ % $

Average 60 65 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250weekly

andworkers hours 1 Mean 2 Median2 Middle range 2and(standard) under

65 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 over

$ $ $ $657 3 9 . 5 1 5 5 . 5 0 1 4 4 .5 0 1 2 4 . 0 0 - 1 9 0 .0 0 - “ - 26 55 54 90 79 57 53 28 31 20 21 22 30 46 32 4 9294 40 .0 180.0 0 18 6.00 1 3 6 . 5 0 - 2 2 4 .0 0 - - 12 15 13 23 15 17 17 3 19 15 12 21 22 45 32 4 9363 3 9 . 5 13 6.00 13 3.0 0 1 1 9 . 0 0 - 1 5 1 . 5 0 - - - 14 40 41 67 64 40 36 25 12 5 9 1 8 1 _ _

52 40 .0 1 6 9 .5 0 17 6 .0 0 1 4 1 . 0 0 - 1 9 3 . 5 0 - - - - 1 4 7 1 1 - 10 9 4 6 - 8 1 _ • _72 3 9 .5 12 2.00 1 1 2 . 0 0 1 0 5 . 0 0 - 1 4 7 . 5 0 “ “ 2 32 7 6 - 11 11 2 1

1 , 0 5 2 3 9 . 5 15 5 .0 0 1 5 3 . 5 0 1 2 0 . 5 0 - 1 8 9 .5 0 _ - _ 38 39 57 126 80 93 72 63 72 74 79 58 72 98 31 _ _ _

623 40.0 17 4 .5 0 180.00 1 5 1 . 5 0 - 2 0 5 . 0 0 - - 1 6 24 38 24 22 36 40 54 67 64 57 61 98 31 - - -429 3 9.5 1 2 6 .5 0 12 3.0 0 1 1 0 . 5 0 - 1 4 1 . 0 0 - - - 37 33 33 88 56 71 36 23 18 7 15 1 11 - - - - -

55 40 .0 1 6 3 .5 0 15 8 .0 0 1 4 5 .0 0 - 1 8 9 . 0 0 - - - - 2 2 - - 7 4 15 1 1 12 - 11 - - - - -

96 3 9.5 1 1 9 .0 0 11 8 . 0 0 1 1 1 . 0 0 - 1 3 4 . 0 0 - - - 15 3 3 32 14 13 7 3 1 3 2 - ~ - - - - -

822 3 9.5 128.00 1 2 1 . 5 0 1 0 7 . 0 0 - 1 4 5 . 5 0 - _ 1 27 78 152 13 1 100 75 85 54 42 22 18 21 16 _ _ _484 40 .0 139.00 1 3 9 . 5 0 1 1 5 . 5 0 - 1 5 9 . 5 0 - - 1 12 49 38 44 44 58 72 49 41 21 18 21 16 - - - - -

338 3 9.0 1 1 2 . 0 0 1 1 1 . 0 0 1 0 4 . 5 0 - 1 2 1 . 0 0 - - - 15 29 114 87 56 17 13 5 1 134 3 9.5 12 8 .50 1 2 4 . 5 0 1 1 7 . 5 0 - 1 4 2 . 0 0 - - - - 1 4 8 5 6 5 528 40 .0 1 1 1 . 0 0 120.00 1 0 3 . 0 0 -1 2 3 .0 0 - - - 2 4 5 3 13 - 1

371 3 9 .5 1 1 0 . 5 0 105.00 9 3 . 0 0 - 1 2 6 .0 0 - - 6 57 82 65 42 42 28 12 34 3138 40 .0 10 7.00 10 3.50 9 2 .0 0 - 1 2 5 . 0 0 - - 28 31 21 18 19 14 6 1233 3 9.5 1 1 2 . 5 0 10 6.50 9 3 . 5 0 - 1 2 8 . 5 0 - - 6 29 51 44 24 23 14 6 33 3

72 40 .0 138.00 1 5 2 .5 0 1 2 4 . 5 0 - 1 5 8 . 0 0 4 3 4 2 6 14 3 33 3

658 3 9 . 5 13 6 . 5 0 1 3 5 . 5 0 1 0 9 . 0 0 - 1 6 1 .0 0 - - i 14 74 82 68 81 22 98 50 45 59 30 9 6 8 11 _ _

311 40 .0 1 5 7 .0 0 159 .0 0 1 4 2 . 0 0 - 1 7 5 . 5 0 - - - 3 12 11 14 22 8 45 48 45 43 30 5 6 8 11 - - -347 3 9 . 5 1 1 8 . 5 0 1 1 4 .0 0 1 0 1 . 5 0 - 1 3 2 . 5 0 - - i 11 62 71 54 59 14 53 2 - 16 - 4 - - - - - -

86 40 .0 14 4 .5 0 14 2 .00 1 3 0 . 0 0 -1 4 8 . 0 0 ~ - 3 1 7 11 5 39 - - 16 - 4 - - - - -

89 3 9 . 5 12 2 .5 0 1 1 4 .0 0 9 9 .5 0 - 1 4 2 .0 0 - - - 11 12 13 15 8 7 5 2 3 9 _ 4 _ _ _ _ _ _

44 40 .0 1 3 7 . 5 0 1 2 4 .5 0 1 0 9 . 0 0 - 1 7 5 . 5 0 - - - 3 - 10 5 5 2 2 1 3 9 - 4 - - - - - -45 39.0 108.0 0 11 0 .0 0 9 2 . 5 0 - 1 2 6 . 0 0 - “ “ 8 12 3 10 3 5 3 1

134 4 1 . 0 9 5.50 93.00 8 2 . 5 0 - 1 0 5 . 5 0 - - 20 39 31 23 8 4 6 3116 4 1 . 0 93 .50 9 1 .0 0 8 1 . 5 0 - 1 0 4 . 0 0 - 20 37 27 18 7 i 4 2

38 40 .0 89.50 92.00 8 4.0 0 - 97 .5 0 - - 2 13 19 4

322 3 9 .5 106.00 100.00 8 5 . 0 0 - 1 1 5 . 0 0 11 - 26 62 63 53 34 20 10 6 5 12 9 11 _ - - _ - « _

108 40.0 104.00 102.00 8 7 . 5 0 - 1 1 4 . 0 0 - - - 30 17 25 14 8 7 2 1 4214 3 9 .5 10 7.00 96.00 8 4 . 5 0 - 1 1 8 . 5 0 11 - 26 32 46 28 20 12 3 4 4 8 9 11 - - - - - - -

32 40 .0 16 9.0 0 1 7 7 . 5 0 1 6 2 . 5 0 - 1 8 6 . 5 0 - - - 2 - - - 1 1 - - 8 9 11 - - - - - - -56 40 .0 94.50 89.00 8 0 .0 0 -10 5 .0 0 “ 14 16 4 9 6 7

68 3 9 . 5 1 2 2 . 5 0 1 2 8 .5 0 1 0 3 . 5 0 - 1 3 8 . 5 0 _ _ 8 3 14 5 6 22 6 2 1 _ 1 _ _ _ _ _49 3 9 . 5 1 1 4 . 5 0 11 0 .0 0 1 0 1 . 0 0 - 1 3 6 . 5 0 “ ” 8 3 14 5 4 9 6

184 3 8 . 5 94.00 93 .50 8 7 .0 0 - 99.50 _ 3 61 79 29 7 1 1 1 1 1162 38.0 92 .00 93.00 8 6 .5 0 - 98.50 - - 3 57 72 29 1

553 3 9 . 5 108.50 103.00 9 5 . 0 0 - 1 1 5 . 0 0 - - 7 80 123 156 81 38 14 5 7 10 29 1 i 1267 40.0 11 6 .0 0 10 5 .5 0 9 6 .0 0 - 1 2 7 . 5 0 - - 2 45 45 64 31 19 7 5 7 10 29 1 i 1 - - - - -

286 3 9 . 5 102.00 10 2.00 9 4 . 5 0 - 1 1 0 . 5 0 - - 5 35 78 92 50 19 745 3 9 . 5 11 0 .0 0 108.00 9 9 .5 0 - 1 2 2 . 0 0 - - - - 13 12 7 6 7

1 , 0 1 0 39.0 85.00 83.00 7 8 .0 0 - 89.50 _ 13 320 450 135 49 21 8 2 2 - 8 2189 3 9 .5 8 7.5 0 8 5 .5 0 8 1 .0 0 - 93 .50 - - 36 90 33 22 4 1 1 2821 3 9 .0 84.50 82. 50 7 8 .0 0 - 88.50 13 284 360 102 27 17 7 1

' '8 2



9

Table A-2. Professional and technical occupations—men and women

(Average straight-time weekly hours and earnings for selected occupations studied on an area basis by industry division, Indianapolis, Ind. , October 1971)


Weekly earnings 1 ( standard)

Numberof

workers

Averageweeklyhours1

(standard)Mean2 Median Middle range2

1 3 4 3 9 . 5$1 7 3 .5 0

$1 7 0 .5 0

$ $ 1 5 4 . 0 0 - 1 9 3 . 0 0

6 3 4 0 . 0 1 7 8 .0 0 1 7 3 .5 0 1 4 1 . 5 0 - 2 1 6 . 0 071 3 9 . 0 1 6 9 .5 0 1 6 9 .5 0 1 5 7 . 0 0 - 1 8 1 . 0 0

1 75 3 9 . 5 1 5 2 .0 0 1 4 4 .0 0 1 2 8 . 0 0 - 1 6 3 . 5 06 0 4 0 . 0 1 7 6 .0 0 1 8 5 .5 0 1 3 8 . 0 0 - 2 1 4 . 0 0

1 1 5 3 9 . 5 1 3 9 .5 0 1 4 0 .0 0 1 2 6 . 0 0 - 1 5 4 . 5 0

9 3 3 9 . 0 1 3 2 .5 0 1 2 7 .5 0 1 1 2 . 5 0 - 1 3 9 . 0 02 6 4 0 . 0 1 6 8 .5 0 1 7 7 .0 0 1 3 9 . 0 0 - 2 0 0 . 5 06 7 3 9 . 0 1 1 8 .5 0 1 1 8 .5 0 1 1 0 . 0 0 - 1 3 3 . 0 0

1 40 3 9 . 5 2 1 6 .5 0 2 0 8 .5 0 1 8 4 . 5 0 - 2 3 4 . 0 04 7 4 0 . 0 2 4 5 .5 0 2 5 6 .0 0 2 0 5 . 0 0 - 2 8 0 . 0 09 3 3 9 . 5 2 0 1 .5 0 1 9 4 .0 0 1 8 2 . 5 0 - 2 2 6 . 0 0

1 2 9 3 9 . 5 1 8 6 .5 0 1 8 5 .0 0 1 6 1 . 0 0 - 2 0 6 . 5 05 4 4 0 . 0 2 1 7 .5 0 2 0 6 .0 0 1 8 8 . 5 0 - 2 4 8 . 0 07 5 3 9 . 0 1 6 4 .0 0 1 6 5 .0 0 1 4 2 . 5 0 - 1 8 9 . 0 0

3 8 3 9 . 0 1 5 4 .0 0 1 5 3 .5 0 1 4 1 . 5 0 - 1 6 7 . 0 0

1 2 3 3 9 . 5 2 9 1 .0 0 2 9 1 .5 0 2 4 5 . 5 0 - 3 2 5 . 0 07 7 4 0 . 0 3 0 7 .0 0 3 0 7 .5 0 2 6 0 . 5 0 - 3 4 6 . 0 04 6 3 9 . 0 2 6 4 .0 0 2 6 2 .5 0 2 3 1 . 0 0 - 2 9 4 . 5 0

9 5 4 0 . 0 2 5 2 .0 0 2 4 9 .5 0 2 1 9 . 0 0 - 2 7 5 . 0 052 4 0 . 0 2 7 4 .5 0 2 7 1 .0 0 2 4 7 . 0 0 - 3 0 9 . 5 04 3 3 9 . 5 2 2 4 .5 0 2 2 3 .5 0 2 0 2 . 5 0 - 2 4 9 . 0 0

3 0 9 4 0 . 0 2 2 5 .0 0 2 1 3 .5 0 1 7 5 . 5 0 - 2 8 1 . 0 02 5 9 4 0 . 0 2 3 3 .0 0 2 1 7 .5 0 1 7 9 . 5 0 - 2 8 4 . 5 0

2 4 6 4 0 . 0 1 6 7 .5 0 1 5 9 .5 0 1 4 4 . 0 0 - 1 7 8 . 5 01 6 9 3 9 . 5 1 7 4 .5 0 1 6 2 .5 0 1 4 7 . 0 0 - 1 8 3 . 0 0

7 7 4 0 . 0 1 5 2 .0 0 1 4 8 .0 0 1 3 8 . 0 0 - 1 6 7 . 0 0

1 5 8 4 0 . 0 1 4 5 .5 0 1 4 1 .5 0 1 2 6 . 5 0 - 1 7 9 . 0 09 7 3 9 . 5 1 5 3 .5 0 1 6 0 .0 0 1 3 1 . 0 0 - 1 8 2 . 0 061 4 0 . 0 1 3 3 .5 0 1 3 2 .5 0 1 1 7 . 5 0 - 1 4 7 . 5 0

1 1 9 4 0 . 0 1 9 3 .0 0 1 8 3 .0 0 1 7 7 . 5 0 - 2 0 5 . 0 0

Number of workers rece iv ing stra ight-tim e weekly earnings of—

* S * * * 5 * * * i I $ $ $ $ i $------ i------ s------ i-----Under 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 2 6 ° 270 280 290S and100 under _ _ — — — — — — — and

_________ 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 over

COMPUTER OPERATORS, CLASS A -----MANUFACTURING -------------------------NONMANUFACTURING --------------------

COMPUTER OPERATORS, CLASS B -----MANUFACTURING -------------------------NONMANUFACTURING --------------------

COMPUTER OPERATORS, CLASS C -----MANUFACTURING -------------------------NONMANUFACTURING --------------------

COMPUTER PR0GRAMERS,BUSINESS, CLASS A ----------------------

MANUFACTURING --------------------------NONMANUFACTURING --------------------

COMPUTER PROGRAMERS,BUSINESS, CLASS B ----------------------

MANUFACTURING -------------------------NONMANUFACTURING--------------------

COMPUTER PROGRAMERS,BUSINESS, CLASS C ----------------------

COMPUTER SYSTEMS ANALYSTS,BUSINESS, CLASS A ----------------------

MANUFACTURING -------------------------NONMANUFACTURING --------------------

COMPUTER SYSTEMS ANALYSTS,BUSINESS, CLASS B ----------------------

MANUFACTURING -------------------------NONMANUFACTURING --------------------

DRAFTSMEN, CLASS A ----------------------MANUFACTURING --------------------------

DRAFTSMEN, CLASS B ----------------------MANUFACTURING -------------------------NONMANUFACTURING --------------------

DRAFTSMEN, CLASS C ----------------------MANUFACTURING --------------------------NONMANUFACTURING --------------------

ELECTRONIC TECHNICIANS ---------------

3 4 6 5 11 19 17 21 14 2 13 4 7 2 3 - 2 - 1 -3 4 6 2 6 4 3 6 3 1 9 4 4 2 3 - 2 - l -- “ “ 3 5 15 14 15 11 1 4 - 3 - “ - - - -

5 12 36 19 30 26 5 2 13 5 5 4 4 5 2 - - - _ _1 11 4 9 2 - 1 7 5 5 4 4 5 2 - - - - -4 12 25 15 21 24 5 1 6

13 20 13 23 3 1 - 5 2 2 4 i i _ _ - _ _ _ _1 1 2 3 3 1 - 5 2 2 4 i i - - - - - - -

12 19 11 20

_ _ - _ _ 1 3 11 32 13 12 7 17 15 2 a 2 6 3 81 - 8 4 2 1 5 1 6 2 6 3 8

~ “ _ 1 2 11 24 13 8 5 16 10 1 2 “ ~ “ “

_ 5 5 3 14 4 12 16 14 18 14 5 1 2 4 4 1 1 3 3- - - 2 4 9 11 4 5 1 2 4 4 1 1 3 3

5 5 3 14 4 10 12 5 7 10

4 - 2 1 9 9 6 3 - 3 - - * - - - 1 - - -

_ _ _ _ _ _ _ _ _ 3 _ 6 6 14 8 5 6 1 10 *641 - 2 i 10 3 2 5 1 4 48

- - - - - 2 - 4 5 4 5 3 1 - 6 16

3 7 8 7 5 10 9 9 11 6 2 * * 1 83 2 2 4 4 6 5 6 2 18

3 7 5 5 3 6 5 3 6 - -_ - - - - 2 0 8 22 4 3 1 4 13 29 3 2 13 12 12 1 7 2 2 0 * * * 6 1“ - 10 3 16 3 7 12 11 28 17 10 12 12 1 7 2 2 0 61

_ - - 18 2 3 5 7 28 3 6 2 8 11 12 2 1 3 4 4 12 4 3 _- - 3 16 35 2 3 21 2 6 10 4 - 1 3 4 4 12 4 3 - -

- “ - 15 7 22 5 15 2 1 * 8 2

- 1 0 1 9 17 32 16 11 9 6 3 6 1 l- 1 13 6 2 0 2 7 9 1 3 6 1 1* 9 6 11 12 14 4 5

5 6 7 4 2 5 13 14

$320 to $340; 8 at $340 to $360; 3 at $360 to $380; 4 at $380 to $400; and 6 at $400 and over.* Workers were distributed as-follows: 10 at $290 to $300; 23 at $300 to $320;** Workers were distributed as follows: 3 at $290 to $300; 5 at $300 to $320; 7 at $320 to $340; and 3 at $340 and $360. *** Workers were distributed as follows: 1 at $290 to $300; 32 at $300 to $320; 27 at $320 to $340; and 1 at $340 and over.



10

Table A -2. Professional and technical occupations—men and wom en---- Continued

(A v e ra g e s tra igh t-tim e w eek ly hours and earnings fo r se lected occupations studied on an area basis by industry d iv is ion , Indianapolis, Ind. , O ctober 1971)

Sex, occupation, and industry division weekly

(standard)

Weekly earnings 1 (standard)

Middle range2

Number of workers receiving straight-time weekly earnings of—r * I i * $ * i I $ $ $ i $ $ $ J i---- 1—

TT , 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290Under* and _ _ _ _ _ _ _ _ _ j100 under - - - - - - - - - and

_________110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 over

WOMEN

COMPUTER OPERATORS, CLASS 8 -----

COMPUTER PROGRAMERS,BUSINESS, CLASS B ---------------

NURSES, INDUSTRIAL {REGISTERED) - MANUFACTURING -----------------

113100

40.040.0

$128.50

177.50180.00

179.00182.50

116 .00 -139 .00

1 3 0 .00 -219 .50

152 .50 -201 .50154 .00 -202 .50

1312

2018


T ab le A -3 . O ffice, professional, and technical o ccu p a tio n s—men and wom en com bined

(Average straight-time weekly hours and earnings for selected occupations studied on an area basis by industry division, Indianapolis, Ind., October 1971)

Occupation and industry divisionNumber

ofworkers

Average

Weekly

(standard)


OFFICE OCCUPATIONS

BILLERS, MACHINE (BILLING13010649

40.040.040.0

126.00132.00177.50

NONMANUFACTURING ----------------

BILLERS, MACHINE (BOOKKEEPING

43 40.0 100.00

Average

Weekly hours 1

(standard)


O O

O O

4- ^

$115 .00111.00

40 .040 .040 .0

102.50100.50

98 .50


of Occupation and industry division

AverageNumber

ofworkers

Weekly hours *

(standard)

Weekly earnings * (standard)

807 39.5 130.00240 40 .0 151.00567 39 .5 121.00

99 40 .0 147.00193 40 .0 115.00

1,181 39 .5 99 .00399 40 .0 111.00782 39.5 93.00131 40 .0 107.00202 40 .0 87.00

OFFICE OCCUPATIONS - CONTINUED

BOOKKEEPING-MACHINE OPERATORS,CLASS A -------------------------

NONMANUFACTURING-------------

BOOKKEEPING-MACHINE OPERATORS,CLASS 8 -------------------------

NONMANUFACTURING -------------RETAIL TRA0E ---------------

138120

38


CLERKS, ACCOUNTING, CLASS A -----MANUFACTURING -----------------NONMANUFACTURING -------------

PUBLIC UTILITIES -----------RETAIL TRADE ----------------

CLERKS, ACCOUNTING, CLASS B -----MANUFACTURING-----------------NONMANUFACTURING -------------

PUBLIC UTILITIES -----------RETAIL TRADE ----------------

See footnote at end o f tables.


11

Table A-3. Office, professional, and technical occupations—men and women combined-----Continued

(A ve ra g e s tra igh t-tim e w eek ly hours and earnings fo r se lected occupations studied on an a rea basis by industry d iv is ion , Indianapolis, Ind., October 1971)


ofworkers

OFFICE OCCUPATIONS - CONTINUEDCLERKS, FILE, CLASS A

NONMANUFACTURING -132116

CLERKS, FILE, CLASS B -------------NONMANUFACTURING ----------------

PUBLIC UTILITIES -------------RETAIL TRADE ------------------

292275

7141

CLERKS, FILE, CLASS CMANUFACTURING ----NONMANUFACTURING —

50252

450

CLERKS, ORDER -----MANUFACTURING --NONMANUFACTURING

565243322

CLERKS, PAYROLL -----MANUFACTURING ----NONMANUFACTURING —

PUBLIC UTILITIES RETAIL TRADE ---

305184121

3351

COMPTOMETER OPERATORSMANUFACTURING ----NONMANUFACTURING —

RETAIL TRADE ---

95375852

KEYPUNCH OPERATORS, CLASS AMANUFACTURING -----------NONMANUFACTURING -------

PUBLIC UTILITIES -----RETAIL TRADE -----------------

57217839413825

KEYPUNCH OPERATORS, CLASS BMANUFACTURING -----------NONMANUFACTURING -------

PUBLIC UTILITIES -----RETAIL TRADE ----------

629220409

58100

MESSENGERS (OFFICE BOYS AND GIRLS)-MANUFACTURING -------------------NONMANUFACTURING ----------------

PUBLIC UTILITIES -------------

30660

24653

SECRETARIES ----------m a n u f a c t u r i n g ----NONMANUFACTURING -

PUBLIC UTILITIES RETAIL TRADE ---

2,7251,5001,225

159216

SECRETARIES, CLASS AMANUFACTURING -----NONMANUFACTURING --

1929993

SECRETARIES, CLASS B ------------MANUFACTURING -------------------NONMANUFACTURING ----------------


657294363

5272

Average

Weekly

(standard'


39.0$102.00

38.5 98 .00

39 .0 93 .5039 .0 93 .5040 .0 119.0040 .0 83.50

38.5 81 .5040 .0 89.5038 .0 80.50

40 .0 113.0040 .0 114.0040 .0 112.0039 .5 129.5039 .5 133.0039.5 124.5040 .0 157.5040 .0 108.50

40 .0 103.5040 .0 119.0040 .0 93 .0040 .0 91 .00

39 .5 116.5040 .0 126.5039 .0 111.5040 .0 120.0039.5 108.50

39 .5 105.0039 .5 121.0039.5 96 .0040 .0 127.0040 .0 93 .50

39 .0 89 .0040 .0 102.0039.0 86.0040 .0 103.0039.5 148.0040 .0 165.0039 .0 127.504 0 .0 160.0040 .0 121.0039 .5 172.0040 .0 187.5039 .5 156.00

39 .5 155.5040 .0 180.0039.5 136.0040 .0 169.5039 .5 122.00

Occupation and industry division


SECRETARIES - CONTINUED

SECRETARIES, CLASS C ------------MANUFACTURING -------------------NONMANUFACTURING ----------------


SECRETARIES, CLASS D ------------MANUFACTURING -------------------NONMANUFACTURING ----------------


STENOGRAPHERS, GENERAL ------------MANUFACTURING -------------------NONMANUFACTURING ----------------


STENOGRAPHERS, SENIOR -------------MANUFACTURING -------------------NONMANUFACTURING ----------------


SWITCHBOARD OPERATORS, CLASS A ----MANUFACTURING -------------------NONMANUFACTURING ----------------

SWITCHBOARD OPERATORS, CLASS B ----NONMANUFACTURING ----------------

RETAIL TRADE ------------------

SWITCHBOARD OPERATOR-RECEPTIONISTS-MANUFACTURING -------------------NONMANUFACTURING ----------------


TABULATING-MACHINE OPERATORS,CLASS A ----------------------------

MANUFACTURING -------------------

TABULATING-MACHINE OPERATORS,

MANUFACTURING -------------------NONMANUFACTURING ----------------

TABULATING-MACHINE OPERATORS,


TRANSCRIBING-MACHINE OPERATORS,GENERAL ----------------------------


TYPISTS, CLASS A -------------------MANUFACTURING -------------------NONMANUFACTURING----------------


AverageNumber

ofworkers

Weekly hours *

(standard)


1,052 39 .5 155.00623 4 0 .0 174.50429 39.5 126.50

55 40 .0 163.5096 39 .5 119.00

822 39 .5 128.00484 40 .0 139.00338 39.0 112.00

34 39.5 128.5028 40 .0 111.00

376 39.5 111.00138 40 .0 107.00238 39.5 113.50

77 40 .0 139.50

658 39.5 136.50311 40 .0 157.00347 39 .5 118.5086 40 .0 144.50

89 39 .5 122.5044 40 .0 137.5045 39 .0 108.00

134 41 .0 95 .50116 41 .0 93 .50

38 40 .0 89 .50

328 39 .5 106.50108 40 .0 104.00220 39.5 108.00

38 40 .0 166.5056 40 .0 94 .50

42 40 .0 175.5027 40 .0 198.00

123 39 .5 137.0049 39.0 159.5074 39 .5 122.50

42 39.0 115.5025 38.5 100.50

186 38 .5 94 .00162 38 .0 92 .00

553 39 .5 108.50267 4 0 .0 116.00286 39 .5 102.00

45 39.5 110.00

Occupation and industry division


TYPISTS, CLASS B -----------------m a n u f a c t u r in g ----------------------------------NONMANUFACTURING-------------

PROFESSIONAL AND TECHNICAL OCCUPATIONS

COMPUTER OPERATORS, CLASS A -----MANUFACTURING -----------------NONMANUFACTURING -------------

COMPUTER OPERATORS, CLASS B -----MANUFACTURING -----------------NONMANUFACTURING -------------

COMPUTER OPERATORS, CLASS C -----MANUFACTURING -----------------NONMANUFACTURING -------------

COMPUTER PROGRAMERS,BUSINESS, CLASS A ---------------

MANUFACTURING-----------------NONMANUFACTURING--------------

COMPUTER PROGRAMERS,BUSINESS, CLASS B ---------------

MANUFACTURING -----------------NONMANUFACTURING --------------

COMPUTER PROGRAMERS,BUSINESS, CLASS C ---------------

NONMANUFACTURING --------------

COMPUTER SYSTEMS ANALYSTS,BUSINESS, CLASS A ---------------

MANUFACTURING -----------------NONMANUFACTURING -------------

COMPUTER SYSTEMS ANALYSTS,BUSINESS, CLASS B ---------------

MANUFACTURING -----------------NONMANUFACTURING --------------

DRAFTSMEN, CLASS A ---------------MANUFACTURING -----------------

DRAFTSMEN, CLASS B ---------------MANUFACTURING -----------------NONMANUFACTURING -------------

DRAFTSMEN, CLASS C ---------------MANUFACTURING -----------------NONMANUFACTURING --------------

ELECTRONIC TECHNICIANS ----------MANUFACTURING -----------------

NURSES, INDUSTRIAL (REGISTERED) - MANUFACTURING -----------------

Numberof Weekly

hours 1 (standard)


1,010 39.0$85.00

189 39.5 87.50821 39 .0 84.50

141 39.5 173.0068 40 .0 177.0073 39 .0 169.50

208 39.5 148.0070 39.5 170.50

138 39.5 137.00

103 39.0 130.0028 40 .0 165.5075 39.0 116.50

155 39.5 216.0055 40 .0 242.50

100 39.5 202.00

165 39.0 183.5071 40 .0 217.5094 38.5 158.00

54 39.0 148.5037 38.5 142.00

127 39.5 291.0081 40 .0 306.0046 39.0 264.00

102 40 .0 248.0055 40 .0 270.0047 39 .5 222.50

310 40 .0 225.00259 40 .0 233.00

248 40 .0 167.50171 39.5 174.5077 40 .0 152.00

217 40 .0 139.0097 39 .5 153.50

120 40 .0 127.00

121 40 .0 193.5096 40.0 192.00

114 40.0 178.00101 40 .0 180.50

See footnote at end o f tables


12

Table A-4. Maintenance and powerplant occupations

(Average straight-time hourly earnings for selected occupations studied on an area oaaxs oy industry division, Indianapolis, Ind., October 1971)

Hourly earnings3 Number of workers receiving straight time hourly earnings of-

Sex, occupation, and industry divisionNumber

ofworkers Mean Median^ Middle range ^

Undei$2.90

s2.90and

under

$3.00

$3.10

$3.20

$3.30

$3.40

S3.50

S3.60

s3.70

$3.80

S3.90

S4 . 0 0

$4 20

$4.40

S4.60

*4. 80

*5.00

S5.20

$5.40

*5.60

t5.80

S6 . 0 0

and

3.00 3.10 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4 . 2 0 4. 40 4.60 4.80 5. 00 5.20 5.40 5.60 5.80 6 . 0 0 over

HEN

$ $ $ $

119 5.08 5.31 4.82- 5.37 8 16 55

88

_759682

5 01 5.03

5 09 5.41

1 1 9 5 ' 0 4.48- 5.49 13 16 2 1 42 83 62 36 25 8 331 1 0 8

1515

1010

208 4.83 88

1010

1010

1919

2323

5151208 *■ *00 4 '1 5*30 20 30

1 1 ^ ^*o? 3*83 3*^6 A*69

182 3.91 3.19- 4.18 a 23 16 16 10 1 2 17 38 1 2 8 143*69

NONMANUFACTURING58 3.93 3.00 3.23 4.45 ID lr6

MACHINE-TOOL OPERATORS. TOOLROOM — MANUFACTURING -------------------

T86786

5.195.19

5.525.52

5.03- 5.575.03- 5.57

“ “ - ii

ii

1 11 1

11

1010

1313

44

77

11

1515

3838

2424

5959

ii

5353

2525

457457

6464

11 :

JZ3 4*96 • 62 5 •->* *MECHANICS, AUTOMOTIVE

1 rn 15A 99 *? 6^

603 5.04 5*295 V

sill- 5.45 13 34 62 13 156 20 298

893 4.74 1 2 1 2 8 1 2 28 54 131 127A 77 4.34- 5.53 42 15 49 59 14 3184 70

5.335.33

5.21- 5.38 5.23- 5.38

ii8

14 1717

287287

6666452 5117 10 14 16 24

g 7Q c na , c/4*09 " 0 9 4*55 5*34 *

349341

5.083*11

5.315.31

4.79- 5.38 8 1 7 1919

45 33 27 136 39 131324.01 j.30 2 1 ' 6 33 27 136 39

SHEET-METAL WORKERS. MAINTENANCE — 106 5.45 5.35 5.31- 5.40 5 8 70 5 3 4 1111

11

4.70- 5.654.70- 5.65

2525

2525

1111

110 426908 5.21 5.54 72 117 52

See footnotes at end of table.


Table A-5. Custodial and material movement occupations

(Average straight-time hourly earnings for selected occupations studied on an area basis by industry division, Indianapolis, Ind., October 1971)

13


HEN

GUARDS AND WATCHMEN ------------------------MANUFACTURING -----------------------------

GUARDSMANUFACTURING -----------------------------

WATCHMENMANUFACTURING -----------------------------

JANITORS, PORTERS, AND CLEANERS ----MANUFACTURING -----------------------------NONHANUFACTURING ------------------------

PUBLIC UTILITIES ---------------------RETAIL TRADE ----------------------------

LABORERS, MATERIAL HANDLING -----------MANUFACTURING -----------------------------NONMANUFACTURING ------------------------


ORDER FILLERS --------------------------------MANUFACTURING -----------------------------NONMANUFACTURING ------------------------

RETAIL TRADE ----------------------------

PACKERS, SHIPPING ----------------------------MANUFACTURING -----------------------------NONMANUFACTURING ------------------------

RECEIVING CLERKS -----------------------------MANUFACTURING -----------------------------NONMANUFACTURING ------------------------

RETAIL TRADE ----------------------------

SHIPPING CLERKS -------------------------------MANUFACTURING -----------------------------

SHIPPING AND RECEIVING CLERKS --------MANUFACTURING-----------------------------NONMANUFACTURING ------------------------

TRUCKDRIVERS ----------------------------------MANUFACTURING -----------------------------NONMANUFACTURING ------------------------


TRUCKDRIVERS, LIGHT (UNDER1-1/2 TONS) ---------------------------------MANUFACTURING -----------------------------NONMANUFACTURING ------------------------

RETAIL TRADE ----------------------------

Hourly earnings3

Numberof

workers Mean 2 Median2 Middle range 2

990$2.96

$2.82

$ $ 1.86- 4.03

578 3.63 3.50 2.93- 4.36

495 3.83 3.99 3.11- 4.37

83 2.44 2.42 1.87- 2.87

2,843 2.78 2.72 2.04- 3.601,472 3.34 3.44 2.75- 4.011,371 2.19 2.06 1.75- 2.39

157 3.34 3.34 3.01- 3.59376 2.16 2.12 1.79- 2.32

3,485 3.80 3.97 3.01- 4.261,597 3.60 3.94 3.06- 4.121,888 3.97 4.14 2.95- 5.231,010 4.74 5.22 4 .2 1 - 5.26

465 2.70 2.54 2.07- 2.86

931 3.33 3.27 2.60- 4.09232 3.40 3.40 2.96- 3.98699 3.30 3.02 2.57- 4.33353 3.25 2.77 2.37- 4.64

489 3.25 3.23 2.73- 4.11418 3.37 3.35 2.87- 4.13

71 2.53 2.65 2.31- 2.75

185 3.31 3.34 2.66- 3.8998 3.30 3.32 2.85- 3.9487 3.31 3.57 2.65- 3.8835 3.11 2.86 2.67- 3.75

123 3.83 3.55 3.26- 4.35106 3.89 3.58 3.22- 4.39

74 3.72 3.84 3.36- 4.2347 3.80 4.19 3.36- 4.2627 3.59 3.82 3.39- 3.89

3,080 4.41 4.74 3.82- 5.23587 4.30 4.60 4.07- 4.84

2,493 4.44 4.81 3.81- 5.241,315 5.03 5.24 5.20- 5.27

550 3.74 3.28 3.02- 4.85

283 3.92 4.72 2.86- 4.8043 3.68 3.19 3.13- 4.82

240 3.97 4.73 2.83- 4.8088 4.12 5.02 2.85- 5.06

Number of workers receiving straight-time hourly earnings of—t $ "I------ $ $ $ t $ i $ $ S ~ i----- ~ i------ * * $ $ $ * S *

Under 1,60 1.70 1.80 1.90 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 3.80 4.00 4.20 4.40 4.60 4.80 5.00 5.20 5.40

1•60 under and

1.70 1.80 1.90 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 3.80 4.00 4.20 4.40 4.60 4.80 5.00 5.20 5.40 over

7 132 176 33 22 13 34 73 68 76 22 41 16 26 18 149 18 25 16 20 5“ “ 30 2 6 2 11 56 59 75 20 40 5 23 17 149 17 25 16 20 5 “

56 41 73 16 36 3 23 17 147 17 25 16 20 5 -

- - 30 2 6 2 11 - 18 2 4 4 2 - - 2 - - - - - -

43 237 135 184 51 264 261 117 332 140 94 149 125 120 133 382 71 5 - - - - -2 6 7 22 36 65 67 271 77 59 105 96 119 133 348 54 5 - - - - -

43 235 129 177 29 228 196 50 61 63 35 44 29 1 - 34 17 - - - - -- - 1 - 3 3 15 10 6 25 33 24 1 - 19 17 - - - - - -

33 38 27 7 5 120 74 11 30 7 6 3 - 15 “ “ “ -

- 16 13 42 197 57 80 219 237 221 129 75 179 350 719 242 68 - - - 641 _- - - - - 96 6 37 100 119 89 105 61 27 299 546 110 2 - - - - -- 16 13 42 101 51 43 119 118 132 24 14 152 51 173 132 66 - - - 641 -

39 - 1 10 150 42 - 127 - - - - 641 -- 16 13 42 101 39 42 85 25 23 5 4 2 2 ~ 66 “ - - -

- - 3 19 54 87 72 152 22 27 83 16 59 81 40 94 6 70 46 _ - _- - - - - 15 20 12 2 13 9 46 - 36 25 40 6 6 1 1 - - -

- 3 19 39 67 60 150 9 18 37 16 23 56 88 - 69 45 - - -* - 3 19 39 31 34 68 “ 18 12 7 2 6 “ 69 45 - -_ - 12 - 23 44 14 72 35 42 66 8 11 16 132 13 - 1 - - - _- ~ 12 21 19 8 36 35 42 66 7 10 16 132 13 1 - - - -“ ~ “ - 2 25 6 36 * “ 1 1

- 1 - 17 4 15 15 16 17 17 7 10 31 15 12 1 4 - 3 -- - - - 17 4 - 3 7 14 17 1 4 11 3 12 1 1 - 3 - -- - - 1 - - - 15 12 9 3 - 6 6 20 12 - - 3 - - - -- 1 - “ 12 9 3 ' - “ 4 3 ~ - - 3 - -

4 4 18 13 34 8 3 2 13 _ _ 1 5 14 44 3 18 12 22 8 - 2 13 - - 1 5 14 4

4 - 8 9 11 2 10 5 25 _ - - _ - _6 8 8 - - 2 23 - - - - - -

4 “ 2 1 3 2 10 3 2 - - - - -

_ _ - 2 22 9 44 115 42 132 120 176 71 229 186 37 252 156 365 81 1023 18- - - - - - 14 32 4 48 20 7 4 9 17 31 105 71 198 2 7 18- - - - 2 22 9 30 83 38 84 100 169 67 220 169 6 147 85 167 79 1016 -

2 165 1 - 1 85 45 - 1016 -“ “ 17 7 30 59 10 81 90 18 13 6 - 6 12 “ 122 79 “

_ _ 2 22 2 4 25 28 30 9 _ _ 4 3 _ 85 14 55- - - - - - 4 - - 18 3 - - 3 - 3 - - 12 - - -

- - - 2 22 2 25 28 12 6 - - 1 - - 85 2 55 - -17 5 9 2 55



14

Table A-5. Custodial and material movement occupations-----Continued

(Average straight-time hourly earnings for selected occupations studied on an area basis by industry division, Indianapolis, Ind., October 1971)


MEN - CONTINUED

TRUCKORIVERS - CONTINUEDTRUCKDRIVERS, MEDIUM (1-1/2 TOAND INCLUDING 4 TONS) ----------MANUFACTURING -------------------NONMANUFACTURING ----------------

RETAIL TRADE ------------------

TRUCKDRIVERS, HEAVY (OVER 4 TONS,TRAILER TYPE) -------------------MANUFACTURING -------------------NONMANUFACTURING ----------------


TRUCKDRIVERS, HEAVY (OVER 4 TONS,OTHER THAN TRAILER TYPE) -------NONMANUFACTURING ----------------

PUBLIC UTILITIES --------------

TRUCKERS, POWER (FORKLIFT) --------MANUFACTURING -------------------NONMANUFACTURING ---------------------------

RETAIL TRADE ------------------

TRUCKERS, POWER (OTHER THANFORKLIFT) --------------------------

MANUFACTURING -------------------

WOMEN

JANITORS, PORTERS, AND CLEANERS ---MANUFACTURING -------------------NONMANUFACTURING ----------------

PUBLIC UTILITIES --------------RETAIL TRADE ------------------

PACKERS, SHIPPING ------------------MANUFACTURING -------------------

Hourly earnings3

Numberof

workers Mean * Median^ Middle range ^

899$3.73

$3.86

$ $ 3.25- 4.09

143 3.91 4.41 3.18- 4.46756 3.70 3.84 3.25- 4.05268 3.13 3.09 2.78- 3.27

1,170 4.93 5.22 4.84- 5.26112 3.84 3.66 3.06- 4.59

1,058 5.04 5.23 4.90- 5.26790 5.24 5.25 5.22- 5.27

665 4.62 4.86 4.59- 5.24429 4.54 5.22 3.47- 5.26266 5.26 5.25 5.23- 5.28

1,542 3.75 3.91 3.19- 4.251,323 3.76 3.95 3.25- 4.25

219 3.64 3.83 3.02- 4.62163 3.58 3.08 3.00- 4.64

125 3.94 4.15 3.16- 4.4684 4.34 4.29 4.14- 4.82

472 2.31 2.07 1.83- 2.72118 3.05 3.05 2.72- 3.44354 2.06 1.89 1.81- 2.3874 2.58 2.51 2.38- 2.7651 2.07 2.08 1.87- 2.29

510 2.56 2.48 2.25- 2.77368 2.69 2.72 2.40- 2.79

Number of workers receiving straight-time hourly earnings of—

Undert * $ t1.60 1.70 1.80 1.90

$ S S $ S S $ S f $ $ S S S $ $ $ S2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 3.80 4.00 4.20 4.40 4.60 4.80 5.00 5.20 5.40

$ and1.60 under and

1.70 1.80 1.90 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 3.80 4.00 4.20 4.40 4.60 4,80 5.00 5.20 5.40 over

- - - - - - 7 40 56 14 65 95 28 54 164 177 7 161 _ 5 19 7 _- - - - 10 18 4 5 5 2 - 2 9 7 76 - 5 - - -

7 30 38 10 60 90 26 54 162 168 - 85 - - 19 7 -“ * “ 7 30 34 10 60 90 1 o “ “ “ - - ~ ~ 1? -

14 _ 37 14 5 16 48 5 6 87 18 165 5 744 614 - 25 10 5 4 - 4 - 25 18 - - 1 6

12 4 - 12 48 1 6 62 - 165 5 743 -" “ “ * “ " “ “ “ “ “ 1 1 “ 45 743

_ _ _ _ _ _ _ _ 20 _ _ _ 143 _ _ _ _ 4 52 180 _ 266 _20 - - - 143 266 -

266 -- - 2 - - 5 11 19 69 53 234 14 5- - - - - - 6 13 46 52 181 145- - 2 - - 5 5 6 23 1 53 -

“ “ ~ 5 5 6 23 1 53 ~

8 3 33 _

3 4

23 141 150 101 512 8 69 - - - -23 139 102 101 512 - 3 - - - -- 2 48 - - 8 66 - - - -- 2 2 - - - 66 - -

- 14 8 23 10 5 6 13 2 -- 10 8 23 10 5 6 13 2

- 32 50 106 26 44 22 49 65 8 15 13 27 1 4 9 1 - - - - - -- - - 2 - 9 1 12 27 6 15 12 19 1 4 9 1 - - - - - -- 32 50 104 26 35 21 37 38 2 - 1 8- - - - 8 7 5 21 25 - - - 8

4 4 7 6 12 11 5 - 2- - 3 2 4 56 143 68 157 21 34 - - - _ 21 1 - - _ - -

- - - - - - 91 63 143 15 34 - * 21 1 - - - - - -

See footnotes at end of tables


15

F o o tn o te s

1 Standard hours re f lect the workweek for which employees receive their regular straight-time salaries (exclusive of pay at regular and/or premium rates), and the earnings correspond to these weekly hours.

2 The mean is computed for each job by totaling the earnings of all workers and dividing by the number of workers, designates position— half of the employees surveyed receive more than the rate shown; half receive less than the rate shown, range is defined by 2 rates of pay; a fourth of the workers earn less than the lower of these rates and a fourth earn more than the

3 Excludes premium pay for overtime and for work on weekends, holidays, and late shifts.

for overtime

The median The middle

higher rate.


A p p e n d ix . O c c u p a tio n a l D e s c rip t io n s

The primary purpose of preparing job descriptions for the Bureau's wage surveys is to assist its field staff in classifying into appropriate occupations workers who are employed under a variety of payroll titles and different work arrangements from establishment to establishment and from area to area. This permits the grouping of occupational wage rates representing comparable job content. Because of this emphasis on interestablishment and interarea comparability of occupational content, the Bureau's job descriptions may differ significantly from those in use in individual establishments or those prepared for other purposes. In applying these job descriptions, the Bureau's field economists are instructed to exclude working supervisors; apprentices; learners; beginners; trainees; and handicapped, part-time, temporary, and probationary workers.

O FFICE

BILLER, MACHINE

Prepares statements, bills, and invoices on a machine other than an ordinary or electro- matic typewriter. May also keep records as to billings or shipping charges or perform other clerical work incidental to billing operations. For wage study purposes, b illers, machine, are classified by type of machine, as follows:

B iller, machine (billing machine). Uses a special billing machine (combination typing and adding machine) to prepare bills and invoices from customers' purchase orders, internally prepared orders, shipping memorandums, etc. Usually involves application of predetermined discounts and shipping charges and entry of necessary extensions, which may or may not be computed on the billing machine, and totals which are automatically accumulated by machine. The operation usually involves a large number of carbon copies of the bill being prepared and is often done on a fanfold machine.

B iller, machine (bookkeeping machine). Uses a bookkeeping machine (with or without a typewriter keyboard) to prepare customers' bills as part of the accounts receivable operation. Generally involves the simultaneous entry of figures on customers' ledger record. The machine automatically accumulates figures on a number of vertical columns and computes and usually prints automatically the debit or credit balances. Does not involve a knowledge of bookkeeping. Works from uniform and standard types of sales and credit slips.

BOOKKEEPING-MACHINE OPERATOR

Operates a bookkeeping machine (with or without a typewriter keyboard) to keep a record of business transactions.

Class A. Keeps a set of records requiring a knowledge of and experience in basic bookkeeping principles, and fam iliarity with the structure of the particular accounting system used. Determines proper records and distribution of debit and credit items to be used in each phase of the work. May prepare consolidated reports, balance sheets, and other records by hand.

Class B. Keeps a record of one or more phases or sections of a set of records usually requiring little knowledge of basic bookkeeping. Phases or sections include accounts payable, payroll, customers' accounts (not including a simple type of billing described under biller, machine), cost distribution, expense distribution, inventory control, etc. May check or assist in preparation of tria l balances and prepare control sheets for the accounting department.

CLERK, ACCOUNTING

Perform s one or more accounting clerical tasks such as posting to registers and ledgers; reconciling bank accounts; verifying the internal consistency, completeness, and mathematical accuracy of accounting documents; assigning prescribed accounting distribution codes; examining and verifying for clerical accuracy various types of reports, lists, calculations, posting, etc.; or preparing simple or assisting in preparing more complicated journal vouchers. May work in either a manual or automated accounting system.

The work requires a knowledge of clerical methods and office practices and procedures which relates to the clerical processing and recording of transactions and accounting information. With experience, the worker typically becomes fam iliar with the bookkeeping and accounting terms and procedures used in the assigned work, but is not required to have a knowledge of the formal principles of bookkeeping and accounting.

CLERK, ACCOUNTING— Continued

Positions are classified into levels on the basis of the following definitions.Class A . Under general supervision, performs accounting clerical operations which

require the application of experience and judgment, for example, c lerica lly processing complicated or nonrepetitive accounting transactions, selecting among a substantial variety of prescribed accounting codes and classifications, or tracing transactions through previous accounting actions to determine source of discrepancies. May be assisted by one or more class B accounting clerks.

Class B. Under close supervision, following detailed instructions and standardized procedures, performs one or more routine accounting clerical operations, such as posting to ledgers, cards, or worksheets where identification of items and locations of postings are clearly indicated; checking accuracy and completeness of standardized and repetitive records or accounting documents; and coding documents using a few prescribed accounting codes.

CLERK, FILE

Files, classifies, and retrieves material in an established filing system. May perform clerical and manual tasks required to maintain files. Positions are classified into levels on the basis of the following definitions.

Class A . Classifies and indexes file material such as correspondence, reports, technical documents, etc., in an established filing system containing a number of varied subject matter files. May also file this material. May keep records of various types in conjunction with the files. May lead a small group of lower level file clerks.

Class B. Sorts, codes, and files unclassified material by simple (subject matter) headings or partly classified material by finer subheadings. Prepares simple related index and cross-reference aids. As requested, locates clearly identified material in files and fo rwards material. May perform related clerical tasks required to maintain and service files.

Class C. Performs routine filing of material that has already been classified or which is easily classified in a simple serial classification system (e.g., alphabetical, chronological, or numerical). As requested, locates readily available material in files and forwards material; and may fill out withdrawal charge. May perform simple clerical and manual tasks required to maintain and service files.

CLERK, ORDER

Receives customers' orders for material or merchandise by mail, phone, or personally. Duties involve any combination of the following: Quoting prices to customers; making out an order sheet listing the items to make up the order; checking prices and quantities of items on order sheet; and distributing order sheets to respective departments to be filled. May check with credit department to determine credit rating o customer, acknowledge receipt of orders from customers, follow up orders to see that they have been filled, keep file of orders received, and check shipping invoices with original orders.

CLERK, PAYROLL

Computes wages of company employees and enters the necessary data on the payroll sheets. Duties involve: Calculating workers' earnings based on time or production records; and posting calculated data on payroll sheet, showing information such as worker's name, working days, time, rate, deductions for insurance, and total wages due. May make out paychecks and assist paymaster in making up and distributing pay envelopes. May use a calculating machine.

NOTE: The Bureau has discontinued collecting data for oilers and plumbers.

16


COMPTOMETER OPERATOR

Prim ary duty is to operate a Comptometer to perform mathematical computations. This job is not to be confused with that of statistical or other type of clerk, which may involve fr e quent use of a Comptometer but, in which, use of this machine is incidental to performance of other duties.

KEYPUNCH OPERATOR

Operates a keypunch machine to record or verify alphabetic and/or numeric data on tabulating cards or on tape.

Positions are classified into levels on the basis of the following definitions.

Class A . Work requires the application of experience and judgment in selecting procedures to be followed and in searching for, interpreting, selecting, or coding items to be keypunched from a variety of source documents. On occasion may also perform some routine keypunch work. May train inexperienced keypunch operators.

Class B . Work is routine and repetitive. Under close supervision or following specific procedures or instructions, works from various standardized source documents which have been coded, and follows specified procedures which have been prescribed in detail and require little or no selecting, coding, or interpreting of data to be recorded. Refers to supervisor problems arising from erroneous items or codes or missing information.

MESSENGER (Office Boy or Girl)

Performs various routine duties such as running errands, operating minor office machines such as sealers or mailers, opening and distributing mail, and other minor clerical work. Exclude positions that require operation o f a motor vehicle as a significant duty.

SECRETARY

Assigned as personal secretary, normally to one individual. Maintains a close and highly responsive relationship to the day-to-day work of the supervisor. Works fa irly independently re ceiving a minimum of detailed supervision and guidance. Perform s varied clerical and secretarial duties, usually including most of the following:

a. Receives telephone calls, personal callers, and incoming mail, answers routine inquiries, and routes technical inquiries to the proper persons;

b. Establishes, maintains, and revises the supervisor's files;

c. Maintains the supervisor's calendar and makes appointments as instructed;

d. Relays messages from supervisor to subordinates;

e. Reviews correspondence, memorandums, and reports prepared by others for the supervisor's signature to assure procedural and typographic accuracy;

f. Performs stenographic and typing work.

May also perform other clerical and secretarial tasks of comparable nature and difficulty. The work typically requires knowledge of office routine and understanding of the organization, programs, and procedures related to the work of the supervisor.

Exclusions

Not all positions that are titled "secretary" possess the above characteristics. Examples of positions which are excluded from the definition are as follows:

a. Positions which do not meet the "personal" secretary concent described above;

b. Stenographers not fully trained in secretarial type duties;

c. Stenographers serving as office assistants to a group of professional, technical, or managerial persons;

d. Secretary positions in which the duties are either substantially more routine or substantially more complex and responsible than those characterized in the definition;

e. Assistant type positions which involve more difficult or more responsible technical, administrative, supervisory, or specialized clerical duties which are not typical of secretarial work.

17

SECRETARY— Continued

NOTE; The term "corporate officer, " used in the level definitions following, refers to those officials who have a significant corporate-wide policymaking role with regard to major company activities. The title "vice president," though normally indicative of this role, does not in all cases identify such positions. Vice presidents whose primary responsibility is to act personally on individual cases or transactions (e.g., approve or deny individual loan or credit actions; administer individual trust accounts; directly supervise a clerical staff) are not considered to be "corporate o fficers" for purposes of applying the following level definitions.

Class A

1. Secretary to the chairman of the board or president of a company that employs, in all, over 100 but fewer than 5,000 persons; or

2. Secretary to a corporate officer (other than the chairman of the board or president) of a company that employs, in all, over 5, 000 but fewer than 25, 000 persons; or

3. Secretary to the head, immediately below the corporate officer level, of a major segment or subsidiary of a company that employs, in all, over 25,000 persons.

Class B

1. Secretary to the chairman of the board or president of a company that employs, in all, fewer than 100 persons; or

2. Secretary to a corporate officer (other than the chairman of the board or president) of a company that employs, in all, over 100 but fewer than 5,000 persons; or

3. Secretary to the head, immediately below the officer level, over either a major corporate-wide functional activity (e.g., marketing, research, operations, industrial rela- tions, etc.) or a major geographic or organizational segment (e.g., a regional headquarters; a major division) of a company that employs, in all, over 5,000 but fewer than 25,000 employees; or

4. Secretary to the head of an individual plant, factory, etc. (or other equivalent level of official) that employs, in all, over 5,000 persons; or

5. Secretary to the head of a large and important organizational segment (e.g., a middle management supervisor of an organizational segment often involving as many as several hundred persons) or a company that employs, in all, over 25,000 persons.

Class C

1. Secretary to an executive or managerial person whose responsibility is not equivalent to one of the specific level situations in the definition for class B, but whose organizational unit normally numbers at least several dozen employees and is usually divided into organizational segments which are often, in turn, further subdivided. In some companies, this level includes a wide range of organizational echelons; in others, only one or two; or

2. Secretary to the head of an individual plant, factory, etc. (or other equivalent level of official) that employs, in all, fewer than 5,000 persons.

Class D

1. Secretary to the supervisor or head of a small organizational unit (e.g., fewer than about 25 or 30 persons); or

2. Secretary to a nonsupervisory staff specialist, professional employee, administrative officer, or assistant, skilled technician or expert. (NOTE: Many companies assignstenographers, rather than secretaries as described above, to this level of supervisory or nonsupervisory worker.)

STENOGRAPHER

Prim ary duty is to take dictation using shorthand, and to transcribe the dictation. May also type from written copy. May operate from a stenographic pool. May occasionally transcribe from voice recordings (if primary duty is transcribing from recordings, see Transcribing-Machine Operator, General).

NOTE: This job is distinguished from that of a secretary in that a secretary normally works in a confidential relationship with only one manager or executive and performs more responsible and discretionary tasks as described in the secretary job definition.

Stenographer, General

Dictation involves a normal routine vocabulary. May maintain files, keep simple records, or perform other relatively routine clerical tasks.


18

STENOGRAPHER— Continued

Stenographer, SeniorDictation involves a varied technical or specialized vocabulary such as in legal briefs

or reports on scientific research. May also set up and maintain files, keep records, etc.

ORPerform s stenographic duties requiring significantly greater independence and respon

sibility than stenographer, general, as evidenced by the following: Work requires a highdegree of stenographic speed and accuracy; a thorough working knowledge of general business and office procedure; and of the specific business operations, organization, policies, procedures, files, workflow, etc. Uses this knowledge in performing stenographic duties and responsible clerical tasks such as maintaining followup files; assembling material for reports, memorandums, and letters; composing simple letters from general instructions; reading and routing incoming mail; and answering routine questions^ etc.

SWITCHBOARD OPERATORClass A. Operates a single- or multiple-position telephone switchboard handling incoming,

outgoing, intraplant or office calls. Performs full telephone information service or handles complex calls, such as conference, collect, overseas, or similar calls, either in addition to doing routine work as described for switchboard operator, class B, or as a full-time assignment. ("Fu ll" telephone information service occurs when the establishment has varied functions that are not readily understandable for telephone information purposes, e.g., because of overlapping or interrelated functions, and consequently present frequent problems as to which extensions are appropriate for calls.)

Class B . Operates a single- or multiple-position telephone switchboard handling incoming, outgoing, intraplant or office calls. May handle routine long distance calls and record tolls. May perform lim ited telephone information service. ("L im ited" telephone information service occurs i f the functions of the establishment serviced are readily understandable for telephone information purposes, or i f the requests are routine, e.g., giving extension numbers when specific names are furnished, or i f complex calls are referred to another operator.)

These classifications do not include switchboard operators in telephone companies who assist customers in placing calls.

SWITCHBOARD OPERATOR-RECEPTIONISTIn addition to performing duties of operator on a single-position or monitor-type switch

board, acts as receptionist and may also type or perform routine clerical work as part of regular duties. This typing or clerical work may take the major part of this worker's time while at switchboard.

TABULATING-MACHINE OPERATOR (E lectric Accounting Machine Operator)Operates one or a variety of machines such as the tabulator, calculator, collator, inter

preter, sorter, reproducing punch, etc. Excluded from this definition are working supervisors. Also excluded are operators of electronic digital computers, even though they may also operate EAM equipment.

P R O F E S S IO N A L

COMPUTER OPERATOR

Monitors and operates the control console of a digital computer to process data according to operating instructions, usually prepared by a programer. Work includes most of the following: Studies instructions to determine equipment setup and operations; loads equipment with required items (tape reels, cards, etc.); switches necessary auxiliary equipment into circuit, and starts and operates computer; makes adjustments to computer to correct operating problems and meet special conditions; reviews errors made during operation and determines cause or refers problem to supervisor or programer; and maintains operating records. May test and assist in correcting program.

For wage study purposes, computer operators are classified as follows:

Class A . Operates independently, or under only general direction, a computer running programs with most of the following characteristics: New programs are frequently tested and introduced; scheduling requirements are of critical importance to minimize downtime; the programs are of complex design so that identification of error source often requires a working knowledge of the total program, and alternate programs may not be available. May give direction and guidance to lower level operators.

Class B. Operates independently, or under only general direction, a computer running programs with most of the following characteristics: Most of the programs are established production runs, typically run on a regularly recurring basis; there is little or no testing

TABULATING-MACHINE OPERATOR (E lectric Accounting Machine Operator)— Continued

Positions are classified into levels on the basis of the following definitions.

Class A . Perform s complete reporting and tabulating assignments including devising difficult control panel wiring under general supervision. Assignments typically involve a variety of long and complex reports which often are irregular or nonrecurring, requiring some planning of the nature and sequencing of operations, and the use of a variety of machines. Is typically involved in training new operators in machine operations or training lower level operators in wiring from diagrams and in the operating sequences of long and complex reports. Does not include positions in which wiring responsibility is limited to selection and insertion of prewired boards.

Class B . Performs work according to established procedures and under specific instructions. Assignments typically involve complete but routine and recurring reports or parts of larger and more complex reports. Operates more difficult tabulating or electrical accounting machines such as the tabulator and calculator, in addition to the simpler machines used by class C operators. May be required to do some wiring from diagrams. May train new employees in basic machine operations.

Class C. Under specific instructions, operates simple tabulating or electrical accounting machines such as the sorter, interpreter, reproducing punch, collator, etc. Assignments typically involve portions of a work unit, for example, individual sorting or collating runs, or repetitive operations. May perform simple wiring from diagrams, and do some filing work.

TRANSCRIBING-MACHINE OPERATOR, GENERAL

Prim ary duty is to transcribe dictation involving a normal routine vocabulary from transcribing-machine records. May also type from written copy and do simple clerical work. Workers transcribing dictation involving a varied technical or specialized vocabulary such as legal briefs or reports on scientific research are not included. A worker who takes dictation in shorthand or by Stenotype or similar machine is classified as a stenographer.

TYPIST

Uses a typewriter to make copies of various materials or to make out bills after calculations have been made by another person. May include typing of stencils, mats, or similar materials for use in duplicating processes. May do clerical work involving little special training, such as keeping simple records, filing records and reports, or sorting and distributing incoming mail.

Class A . Performs one or more of the following: Typing material in final form when it involves combining material from several sources; or responsibility for correct spelling, syllabication, punctuation, etc., of technical or unusual words or foreign language material; or planning layout and typing of complicated statistical tables to maintain uniformity and balance in spacing. May type routine form letters, varying details to suit circumstances.

Class B . Performs one or more of the following: Copy typing from rough or clear drafts; or routine typing of forms, insurance policies, etc.; or setting up simple standard tabulations; or copying more complex tables already set up and spaced properly.

A N D T E C H N IC A L

COMPUTER OPERATOR— Continued

of new programs required; alternate programs are provided in case original program needs major change or cannot be corrected within a reasonable time. In common error situations, diagnoses cause and takes corrective action. This usually involves applying previously programed corrective steps, or using standard correction techniques.

OR

Operates under direct supervision a computer running programs or segments of programs with the characteristics described for class A. May assist a higher level operator by independently performing less difficult tasks assigned, and performing difficult tasks following detailed instructions and with frequent review of operations performed.

Class C. Works on routine programs under close supervision. Is expected to develop working knowledge of the computer equipment used and ability to detect problems involved in running routine programs. Usually has received some formal training in computer operation. May assist higher level operator on complex programs.

COMPUTER PROGRAMER, BUSINESS

Converts statements of business problems, typically prepared by a systems analyst, into a sequence of detailed instructions which are required to solve the problems by automatic data processing equipment. Working from charts or diagrams, the programer develops the precise instructions which, when entered into the computer system in coded language, cause the manipulation


COMPUTER PROGRAMER, BUSINESS— Continued

of data to achieve desired results. Work involves most of the following: Applies knowledge ofcomputer capabilities, mathematics, logic employed by computers, and particular subject matter involved to analyze charts and diagrams of the problem to be programed; develops sequence of program steps; writes detailed flow charts to show order in which data w ill be processed; converts these charts to coded instructions for machine to follow; tests and corrects programs; prepares instructions for operating personnel during production run; analyzes, reviews, and alters programs to increase operating efficiency or adapt to new requirements; maintains records of program development and revisions. (NOTE: Workers performing both systems analysis and programing should be classified as systems analysts i f this is the skill used to determine their pay.)

Does not include employees prim arily responsible for the management or supervision of other electronic data processing employees, or programers prim arily concerned with scientific and/or engineering problems.

For wage study purposes, programers are classified as follows:Class A . Works independently or under only general direction on complex problems which

require competence in all phases of programing concepts and practices. Working from diagrams and charts which identify the nature of desired results, major processing steps to be accomplished, and the relationships between various steps of the problem solving routine; plans the full range of programing actions needed to efficiently utilize the computer system in achieving desired end products.

At this level, programing is difficult because computer equipment must be organized to produce several interrelated but diverse products from numerous and diverse data elements. A wide variety and extensive number of internal processing actions must occur. This requires such actions as development of common operations which can be reused, establishment of linkage points between operations, adjustments to data when program requirements exceed computer storage capacity, and substantial manipulation and resequencing of data elements to form a highly integrated program.

May provide functional direction to lower level programers who are assigned to assist.

Class B . Works independently or under only general direction on relatively simple programs, or on simple segments of complex programs. Programs (or segments) usually process information to produce data in two or three varied sequences or formats. Reports and listings are produced by refining, adapting, arraying, or making minor additions to or deletions from input data which are readily available. While numerous records may be processed, the data have been refined in prior actions so that the accuracy and sequencing of data can be tested by using a few routine checks. Typically, the program deals with routine record-keeping type operations.

ORWorks on complex programs (as described for class A) under close direction of a higher

level programer or supervisor. May assist higher level programer by independently performing less difficult tasks assigned, and performing more difficult tasks under fa irly close direction.

May guide or instruct lower level programers.Class C. Makes practical applications of programing practices and concepts usually

learned in formal training courses. Assignments are designed to develop competence in the application of standard procedures to routine problems. Receives close supervision on new aspects of assignments; and work is reviewed to verify its accuracy and conformance with required procedures.

COMPUTER SYSTEMS ANALYST, BUSINESSAnalyzes business problems to formulate procedures for solving them by use of electronic

data processing equipment. Develops a complete description of all specifications needed to enable programers to prepare required digital computer programs. Work involves most of the following: Analyzes subject-matter operations to be automated and identifies conditions and criteria required to achieve satisfactory results; specifies number and types of records, files, and documents to be used; outlines actions to be performed by personnel and computers in sufficient detail for presentation to management and for programing (typically this involves preparation of work and data flow charts); coordinates the development of test problems and participates in tria l runs of new and revised systems; and recommends equipment changes to obtain more effective overall operations. (NOTE: Workers performing both systems analysis and programing should be classified as systems analysts if this is the skill used to determine their pay.)

Does not include employees primarily responsible for the management or supervision of other electronic data processing employees, or systems analysts primarily concerned with scientific or engineering problems.

For wage study purposes, systems analysts are classified as follows:

Class A . Works independently or under only general direction on complex problems involving all phases of systems analysis. Problems are complex because of diverse sources of input data and multiple-use requirements of output data. (For example, develops an integrated production scheduling, inventory control, cost analysis, and sales analysis record in which

19

COMPUTER SYSTEMS ANALYST, BUSINESS— Continued

every item of each type is automatically processed through the full system of records and appropriate followup actions are initiated by the computer.) Confers with persons concerned to determine the data processing problems and advises subject-matter personnel on the implications of new or revised systems of data processing operations. Makes recommendations, if needed, for approval of major systems installations or changes and for obtaining equipment.

May provide functional direction to lower level systems analysts who are assigned to assist.

Class B . Works independently or under only general direction on problems that are relatively uncomplicated to analyze, plan, program, and operate. Problems are of limited complexity because sources of input data are homogeneous and the output data are closely related. (For example, develops systems for maintaining depositor accounts in a bank, maintaining accounts receivable in a retail establishment, or maintaining inventory accounts in a manufacturing or wholesale establishment.) Confers with persons concerned to determine the data processing problems and advises subject-matter personnel on the implications of the data processing systems to be applied.

OR

Works on a segment of a complex data processing scheme or system, as described for class A. Works independently on routine assignments and receives instruction and guidance on complex assignments. Work is reviewed for accuracy of judgment, compliance with instructions, and to insure proper alinement with the overall system.

Class C. Works under immediate supervision, carrying out analyses as assigned, usually of a single activity. Assignments are designed to develop and expand practical experience in the application of procedures and skills required for systems analysis work. For example, may assist a higher level systems analyst by preparing the detailed specifications required by programers from information developed by the higher level analyst.

DRAFTSMAN

Class A . Plans the graphic presentation of complex items having distinctive design features that differ significantly from established drafting precedents. Works in close support with the design originator, and may recommend minor design changes. Analyzes the effect of each change on the details of form , function, and positional relationships of components and parts. Works with a minimum of supervisory assistance. Completed work is reviewed by design originator for consistency with prior engineering determinations. May either prepare drawings, or direct their preparation by lower level draftsmen.

Class B. Perform s nonroutine and complex drafting assignments that require the application of most of the standardized drawing techniques regularly used. Duties typically involve such work as: Prepares working drawings of subassemblies with irregular shapes,multiple functions, and precise positional relationships between components; prepares architectural drawings for construction of a building including detail drawings of foundations, wall sections, floor plans, and roof. Uses accepted formulas and manuals in making necessary computations to determine quantities o f materials to be used, load capacities, strengths, stresses, etc. Receives initial instructions, requirements, and advice from supervisor. Completed work is checked for technical adequacy.

Class C. Prepares detail drawings of single units or parts for engineering, construction, manufacturing, or repair purposes. Types of drawings prepared include isometric projections (depicting three dimensions in accurate scale) and sectional views to clarify positioning of components and convey needed information. Consolidates details from a number of sources and adjusts or transposes scale as required. Suggested methods of approach, applicable precedents, and advice on source materials are given with initial assignments. Instructions are less complete when assignments retur. Work may be spot-checked during progress.

DRAFTSMAN-TRACER

Copies plans and drawings prepared by others by placing tracing cloth or paper over drawings and tracing with pen or pencil. (Does not include tracing limited to plans prim arily consisting of straight lines and a large scale not requiring close delineation.)

AND/OR

Prepares simple or repetitive drawings of easily visualized items. Work is closely supervised during progress.

ELECTRONIC TECHNICIAN

Works on various types of electronic equipment or systems by performing one or more of the following operations: Modifying, installing, repairing, and overhauling. These operations require the performance of most or all of the following tasks: Assembling, testing, adjusting,calibrating, tuning, and alining.

Work is nonrepetitive and requires a knowledge of the theory and practice of electronics pertaining to the use of general and specialized electronic test equipment; trouble analysis; and the operation, relationship, and alinement of electronic systems, subsystems, and circuits having a variety of component parts.


2 0

ELECTRONIC TECHNICIAN— Continued

Electronic equipment or systems worked on typically include one or more of the following: Ground, vehicle, or airborne radio communications systems, relay systems, navigation aids; airborne or ground radar systems; radio and television transmitting or recording systems; electronic computers; m issile and spacecraft guidance and control systems; industrial and medical measuring, indicating and controlling devices; etc.

(Exclude production assemblers and testers, craftsmen, draftsmen, designers, engineers, and repairmen of such standard electronic equipment as office machines, radio and television receiving sets.)

NURSE, INDUSTRIAL (Registered)

A registered nurse who gives nursing service under general medical direction to i l l or injured employees or other persons who become ill or suffer an accident on the premises of a factory or other establishment. Duties involve a combination of the following; Giving first aid to the ill or injured; attending to subsequent dressing of employees' injuries; keeping records of patients treated; preparing accident reports for compensation or other purposes; assisting in physical examinations and health evaluations of applicants and employees; and planning and carrying out programs involving health education, accident prevention, evaluation of plant environment, or other activities affecting the health, welfare, and safety of all personnel. Nursing supervisors or head nurses in establishments employing more than one nurse are excluded.

M A IN T E N A N C E A N D P O W E R P L A N T

CARPENTER, MAINTENANCE

Performs the carpentry duties necessary to construct and maintain in good repair building woodwork and equipment such as bins, cribs, counters, benches, partitions, doors, floors, stairs, casings, and trim made of wood in an establishment. Work involves most of the following: Planning and laying out of work from blueprints, drawings, models, or verbal instructions; using a variety of carpenter's handtools, portable power tools, and standard measuring instruments; making standard shop computations relating to dimensions of work; and selecting materials necessary for the work. In general, the work of the maintenance carpenter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

ELECTRICIAN, MAINTENANCE

Perform s a variety of electrical trade functions such as the installation, maintenance, or repair of equipment for the generation, distribution, or utilization of electric energy in an establishment. Work involves most of the following: Installing or repairing any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment; working from blueprints, drawings, layouts, or other specifications; locating and diagnosing trouble in the electrical system or equipment; working standard computations relating to load requirements of wiring or electrical equipment; and using a variety of electrician’ s handtools and measuring and testing instruments. In general, the work of the maintenance electrician requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.ENGINEER, STATIONARY

Operates and maintains and may also supervise the operation of stationary engines and equipment (mechanical or e lectrical) to supply the establishment in which employed with power, heat, refrigeration, or air-conditioning. Work involves: Operating and maintaining equipmentsuch as steam engines, air compressors, generators, motors, turbines, ventilating and re frig erating equipment, steam boilers and boiler-fed water pumps; making equipment repairs; and keeping a record of operation of machinery, temperature, and fuel consumption. May also supervise these operations. Head or chief engineers in establishments employing more than one engineer are excluded.

FIREMAN, STATIONARY BOILERFires stationary boilers to furnish the establishment in which employed with heat, power,

or steam. Feeds fuels to fire by hand or operates a mechanical stoker, gas, or oil burner; and checks water and safety valves. May clean, oil, or assist in repairing boilerroom equipment.

HELPER, MAINTENANCE TRADESAssists one or more workers in the skilled maintenance trades, by performing specific

or general duties of lesser skill, such as keeping a worker supplied with materials and tools; cleaning working area, machine, and equipment; assisting journeyman by holding materials or tools; and performing other unskilled tasks as directed by journeyman. The kind of work the helper is permitted to perform varies from trade to trade: In some trades the helper is confined to supplying, lifting, and holding materials and tools, and cleaning working areas; and in others he is permitted to perform specialized machine operations, or parts of a trade that are also performed by workers on a full-time basis.MACHINE-TOOL OPERATOR, TOOLROOM

Specializes in the operation of one or more types of machine tools, such as jig borers, cylindrical or surface grinders, engine lathes, or milling machines, in the construction of machine-shop tools, gages, jigs, fixtures, or dies. Work involves most of the following: Planning and performing difficult machining operations; processing items requiring complicated setups or a high degree of accuracy; using a variety of precision measuring instruments; selecting feeds, speeds, tooling, and operation sequence; and making necessary adjustments during operation to achieve requisite tolerances or dimensions. May be required to recognize when tools need dressing, to dress tools, and to select proper coolants and cutting and lubricating oils. For cross-industry wage study purposes, machine-tool operators, toolroom, in tool and die jobbing shops are excluded from this classification.

MACHINIST, MAINTENANCE

Produces replacement parts and new parts in making repairs of metal parts of mechanical equipment operated in an establishment. Work involves most of the following: Interpreting written instructions and specifications; planning and laying out of work; using a variety of machinist's handtools and precision measuring instruments; setting up and operating standard machine tools; shaping of metal parts to close tolerances; making standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining; knowledge of the working properties of the common metals; selecting standard materials, parts, and equipment required for his work; and fitting and assembling parts into mechanical equipment. In general, the machinist's work normally requires a rounded training in machine-shop practice usually acquired through a formal apprenticeship or equivalent training and experience.

MECHANIC, AUTOMOTIVE (Maintenance)

Repairs automobiles, buses, motortrucks, and tractors of an establishment. Work involves most of the following: Examining automotive equipment to diagnose source of trouble; disassembling equipment and performing repairs that involve the use of such handtools as wrenches, gages, drills , or specialized equipment in disassembling or fitting parts; replacing broken or defective parts from stock; grinding and adjusting valves; reassembling and installing the various assemblies in the vehicle and making necessary adjustments; and alining wheels, adjusting brakes and lights, or tightening body bolts. In general, the work of the automotive mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

This classification does not include mechanics who repair customers' vehicles in automobile repair shops.

MECHANIC, MAINTENANCE

Repairs machinery or mechanical equipment of an establishment. Work involves most of the following: Examining machines and mechanical equipment to diagnose source of trouble;dismantling or partly dismantling machines and performing repairs that mainly involve the use of handtools in scraping and fitting parts; replacing broken or defective parts with items obtained from stock; ordering the production of a replacement part by a machine shop or sending of the machine to a machine shop for major repairs; preparing written specifications for major repairs or for the production of parts ordered from machine shop; reassembling machines; and making all necessary adjustments for operation. In general, the work of a maintenance mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Excluded from this classification are workers whose primary duties involve setting up or adjusting machines.

MILLWRIGHT

Installs new machines or heavy equipment, and dismantles and installs machines or heavy equipment when changes in the plant layout are required. Work involves most of the following: Planning and laying out of the work; interpreting blueprints or other specifications; using a variety of handtools and rigging; making standard shop computations relating to stresses, strength of materials, and centers of gravity; alining and balancing of equipment; selecting standard tools, equipment, and parts to be used; and installing and maintaining in good order power transmission equipment such as drives and speed reducers. In general, the m illwright's work normally requires a rounded training and experience in the trade acquired through a formal apprenticeship or equivalent training and experience.

PAINTER, MAINTENANCE

Paints and redecorates walls, woodwork, and fixtures of an establishment. Work involves the following: Knowledge of surface peculiarities and types of paint required for different applications; preparing surface for painting by removing old finish or by placing putty or fille r in nail


21

PAINTER, MAINTENANCE— Continued

holes and interstices; and applying paint with spray gun or brush. May m ix colors, oils, white lead, and other paint ingredients to obtain proper color or consistency. In general, the work of the maintenance painter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

P IPEFITTER, MAINTENANCE

Installs or repairs water, steam, gas, or other types of pipe and pipefittings in an establishment. Work involves most of the following: Laying out of work and measuring to locateposition of pipe from drawings or other written specifications; cutting various sizes of pipe to correct lengths with chisel and hammer or oxyacetylene torch or pipe-cutting machines; threading pipe with stocks and dies; bending pipe by hand-driven or power-driven machines; assembling pipe with couplings and fastening pipe to hangers; making standard shop computations relating to pressures, flow, and size of pipe required; and making standard tests to determine whether finished pipes meet specifications. In general, the work of the maintenance pipefitter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Workers prim arily engaged in installing and repairing building sanitation or heating systems are excluded.

SHEET-METAL WORKER, MAINTENANCE

Fabricates, installs, and maintains in good repair the sheet-metal equipment and fixtures (such as machine guards, grease pans, shelves, lockers, tanks, ventilators, chutes, ducts, metal roofing) of an establishment. Work involves most of the following: Planning and laying out all types of sheet-metal maintenance work from blueprints, models, or other specifications; setting

SHEET-M ETAL WORKER, MAINTENANCE---Continued

up and operating all available types of sheet-metal working machines; using a variety of handtools in cutting, bending, forming, shaping, fitting, and assembling; and installing sheet-metal articles as required. In general, the work of the maintenance sheet-metal worker requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

TOOL AND DIE MAKER

(Die maker; jig maker; tool maker; fixture maker; gage maker)

Constructs and repairs machine-shop tools, gages, jigs,' fixtures or dies for forgings, punching, and other metal-forming work. Work involves most of the following: Planning andlaying out of work from models, blueprints, drawings, or other oral and written specifications; using a variety of tool and die maker's handtools and precision measuring instruments; understanding of the working properties of common metals and alloys; setting up and operating of machine tools and related equipment; making necessary shop computations relating to dimensions of work, speeds, feeds, and tooling of machines; heat-treating of metal parts during fabrication as well as of finished tools and dies to achieve required qualities; working to close tolerances; fitting and assembling of parts to prescribed tolerances and allowances; and selecting appropriate materials, tools, and processes. In general, the tool and die maker's work requires a rounded training in machine-shop and toolroom practice usually acquired through a formal apprenticeship or equivalent training and experience.

For cross-industry wage study purposes, tool and die makers in tool and die jobbing shops are excluded from this classification.

C U S T O D IA L A N D M A T E R IA L M O V E M E N T

GUARD AND WATCHMAN

Guard. Performs routine police duties, either at fixed post or on tour, maintaining order, using arms or force where necessary. Includes gatemen who are stationed at gate and check on identity of employees and other persons entering.

Watchman. Makes rounds of premises periodically in protecting property against fire , theft, and illegal entry.

JANITOR, PORTER, OR CLEANER

(Sweeper; charwoman; janitress)Cleans and keeps in an orderly condition factory working areas and washrooms, or

premises of an office, apartment house, or commercial or other establishment. Duties involve a combination of the following; Sweeping, mopping or scrubbing, and polishing floors; removing chips, trash, and other refuse; dusting equipment, furniture, or fixtures; polishing metal fixtures or trimmings; providing supplies and minor maintenance services; and cleaning lavatories, showers, and restrooms. Workers who specialize in window washing are excluded.

LABORER, M ATERIAL HANDLING

(Loader and unloader; handler and stacker; shelver; trucker; stockman or stock helper; warehouseman or warehouse helper)

A worker employed in a warehouse, manufacturing plant, store, or other establishment whose duties involve one or more of the following: Loading and unloading various materials and merchandise on or from freight cars, trucks, or other transporting devices; unpacking, shelving, or placing materials or merchandise in proper storage location; and transporting materials or merchandise by handtruck, car, or wheelbarrow. Longshoremen, who load and unload ships are excluded.

ORDER FILLER(Order picker; stock selector; warehouse stockman)

Fills shipping or transfer orders for finished goods from stored merchandise in accordance with specifications on sales slips, customers' orders, or other instructions. May, in addition to filling orders and indicating items filled or omitted, keep records of outgoing orders, requisition additional stock or report short supplies to supervisor, and perform other related duties.

PACKER, SHIPPINGPrepares finished products for shipment or storage by placing them in shipping con

tainers, the specific operations performed being dependent upon the type, size, and number of units to be packed, the type of container employed, and method of shipment. Work requires the placing of items in shipping containers and may involve one or more of the following; Knowledge of various items of stock in order to verify content; selection of appropriate type

PACKER, SHIPPING— Continued

and size of container; inserting enclosures in container; using excelsior or other material to prevent breakage or damage; closing and sealing container; and applying labels or entering identifying data on container. Packers who also make wooden boxes or crates are excluded.SHIPPING AND RECEIVING CLERK

Prepares merchandise for shipment, or receives and is responsible for incoming shipments of merchandise or other materials. Shipping work involves: A knowledge of shipping procedures, practices, routes, available means of transportation, and rates; and preparing records of the goods shipped, making up bills of lading, posting weight and shipping charges, and keeping a file of shipping records. May direct or assist in preparing the merchandise for shipment. Receiving work involves: Verifying or directing others in verifying the correctness of shipments against bills of lading, invoices, or other records; checking for shortages and rejecting damaged goods; routing merchandise or materials to proper departments; and maintaining necessary records and files.

For wage study purposes, workers are classified as follows:Receiving clerk Shipping clerkShipping and receiving clerk

TRUCKDRIVER

Drives a truck within a city oV industrial area to transport materials, merchandise, equipment, or men between various types of establishments such as: Manufacturing plants, freight depots, warehouses, wholesale and retail establishments, or between retail establishments and customers' houses or places of business. May also load or unload truck with or without helpers, make minor mechanical repairs, and keep truck in good working order. Driver-salesmen and over-the-road drivers are excluded.

For wage study purposes, truckdrivers are classified by size and type of equipment, as follows: (Tractor-tra iler should be rated on the basis of tra iler capacity.)

Truckdriver (combination of sizes listed separately)Truckdriver, light (under l'/a tons)Truckdriver, medium (l'/z to and including 4 tons)Truckdriver, heavy (over 4 tons, tra iler type)Truckdriver, heavy (over 4 tons, other than tra iler type)

TRUCKER, POWER

Operates a manually controlled gasoline- or electric-powered truck or tractor to transport goods and materials of all kinds about a warehouse, manufacturing plant, or other establishment.

For wage study purposes, workers are classified by type of truck, as follows:Trucker, power (forklift)Trucker, power (other than forklift)


Available On Request-----

The following areas are surveyed periodically for use in administering the Service Contract Act of 1965. available at no cost while supplies last from any of the BLS regional offices shown on the inside front cover.

Copies of public releases are

Alaska Albany, Ga.Alpena, Standish, and Tawas City, Mich. Am arillo , Tex.Asheville, N.C.Atlantic City, N.J.Augusta, G a—S.C.Austin, Tex.Bakersfield, Calif.Baton Rouge, La.B iloxi, Gulfport, and Pascagoula, Miss. Bridgeport, Norwalk, and Stamford, Conn. Charleston, S.C.C larksville , Tenn., and Hopkinsville, Ky. Colorado Springs, Colo.Columbia, S.C.Columbus, Ga.—Ala.Crane, Ind.Dothan, Ala.Duluth—Superior, Minn.—Wis.Durham, N.C.El Paso, Tex.Eugene, Oreg.Fargo—Moorhead, N. Dak.—Minn. Fayetteville, N.C.Fitchburg-Leom inster, Mass.Fort Smith, Ark.—Okla.Frederick—Hagerstown, Md.—Pa.—W. Va. Great Falls, Mont.Greensboro—Winston Salem—High Point, N.C. Harrisburg, Pa.Huntsville, Ala.Knoxville, Tenn.

Laredo, Tex.Las Vegas, Nev.Lexington, Ky.Lower Eastern Shore, Md.—Va.Macon, Ga.Marquette, Escanaba, Sault Ste. M arie, Mich. Meridian, M iss.Middlesex, Monmouth, Ocean and Somerset

Cos., N.J.Mobile, A la., and Pensacola, Fla. Montgomery, Ala.Nashville, Tenn.New London— Groton-Norwich, Conn. Northeastern Maine Ogden, Utah Orlando, Fla.Oxnard—Ventura, Calif.Panama City, Fla.P in e B lu ff, A rk .Portsmouth, N.H.—Maine—Mass.Pueblo, Colo.Reno, Nev.Sacramento, Calif.Santa Barbara, Calif.Shreveport, La.Springfield—Chicopee—Holyoke, Mass.—Conn. Stockton, Calif.Tacoma, Wash.Topeka, Kans.Tucson, A riz .Vallejo—Napa, Calif.Wichita Falls, Tex.Wilmington, Del.—N.J.—Md.

The eleventh annual report on salaries for accountants, auditors, chief accountants, attorneys, job analysts, directors o f personnel, buyers, chemists, engineers, engineering technicians, draftsmen, and c lerica l employees. Order as BLS Bulletin 1693, National Survey of Professional, Administrative, Technical, and C lerica l Pay, June 1970, $1.00 a copy, from the Superintendent of Documents, U.S. Government Printing O ffice, Washington, D.C., 20402, or any of its regional sales offices.

☆ U . S . G O V E R N M E N T P R I N T I N G O F F I C E : 1 9 7 2 - 7 4 5 - 1 0 1 / 4 7Digitized for FRASER http://fraser.stlouisfed.org/ Federal Reserve Bank of St. Louis

A rea W ag e Surveys

A list of the latest available bulletins is presented below. A directory of area wage studies including more lim ited studies conducted at the request of the Employment Standards Administration of the Department of Labor is available on request. Bulletins may be purchased from the Superintendent of Documents, U.S. Government Printing O ffice, Washington, D.C., 20402, or from any of the BLS regional sales offices shown on the inside front cover.

Bulletin numberArea and price

Akron, Ohio, July 1971 1---------------------------------------- 1685-87, 40 centsAlbany—Schenectady—Troy, N .Y ., Mar. 1971 1---------- 1685-54, 35 centsAlbuquerque, N. M ex., Mar. 1971_______ --------- ------- 1685-58, 30 centsAllentown—Bethlehem—Easton, Pa.—N.J., May 1971— 1685-75, 30 centsAtlanta, Ga., May 1971________________________________ 1685-69, 40 centsBaltimore, M d., Aug. 1971 ------------- —-------------------- 1725-16, 35 centsBeaumont—Port Arthur—Orange, Tex., May 1971 1--- 1685-68, 35 centsBinghamton, N .Y., July 1971 1 ------------------------------- 1725-6, 35 centsBirmingham, A la., Mar. 1971 1 ----------------------------- 1685-63, 40 centsBoise City, Idaho, Nov. 1970 1--------------- --------------- 1685-21, 35 centsBoston, Mass., Aug. 1971-------------------------------------- 1725-11, 40 centsBuffalo, N .Y., Oct. 19701______________________________ 1685-43, 50 centsBurlington, V t., Mar. 1971 1 ---------------------------------- 1685-59, 35 centsCanton, Ohio, May 1971 ---------------------------------------- 1685-71, 30 centsCharleston, W. Va., Mar. 1971------------------------------ 1685-57, 30 centsCharlotte, N.C., Jan. 1971_____________________________ 1685-48, 30 centsChattanooga, Tenn.—Ga., Sept. 1971------------------------ 1725-14, 30 centsChicago, 111., June 1970_______________________________ 1660-90, 60 centsCincinnati, Ohio—Ky.—Ind., Feb. 1971 1-------------------- 1685-53, 45 centsCleveland, Ohio, Sept. 1971---------------------------------- 1725-17, 40 centsColumbus, Ohio, Oct. 1971 --------------- ------------------- 1725-19, 30 centsDallas, Tex., Oct. 1970 1______________________________ 1685-22, 50 centsDavenport—Rock Island-Moline, Iowa—111.,

Feb. 1971______________________________________________ 1685-51, 30 centsDayton, Ohio, Dec. 1970 1-------------------- ---------------- 1685-45, 40 centsDenver, Colo., Dec. 1970________________________-____ 1685-41, 35 centsDes Moines, Iowa, May 1971__________________________ 1685-70, 30 centsDetroit, Mich., Feb. 1971 1------------------------------------ 1685-77, 50 centsFort Worth, Tex., Oct. 1971--------------------------------- 1725-21, 30 centsGreen Bay, W is., July 1971 ----------------------------------- 1725-3, 30 centsGreenville, S.C., May 1971 1--------------------------------- 1685-78, 35 centsHouston, T ex ., Apr. 1971 1 ------------ -------------------— 1685-67, 50 centsIndianapolis, Ind., Oct. 1971--------------------------------- 1725-23, 30 centsJackson, M iss ., Jan. 1971 1 ---------------------------------- 1685-39, 35 centsJacksonville, F la ., Dec. 1970 1------------------------------ 1685-37, 35 centsKansas City, Mo.-Kans., Sept. 1971 ----------------------- 1725-18, 35 centsLawrence—Haverhill, Mass.—N.H., June 1971--------- - 1685-83, 30 centsLittle Rock—North Little Rock, Ark., July 1971 ------- 1725-4, 30 centsLos Angeles—Long Beach and Anaheim—Santa Ana-

Garden Grove, C a lif., Mar. 1971 1____ _________——- 1685-66, 50 centsLouisville, Ky.—Ind., Nov. 1970----------------------------- 1685-27, 30 centsLubbock, T ex ., Mar. 1971—_______— ---------------- ---- 1685-60, 30 centsManchester, N.H., July 1971--------------------------------- 1725-2, 30 centsMemphis, Tenn.—A rk ., Nov. 1970--------------------------- 1685-30, 30 centsM iam i, F la ., Nov. 1970 1------------------------------- ------- 1685-29, 40 centsMidland and Odessa, T ex ., Jan. 1971---------------------- 1685-40, 30 centsMilwaukee, W is., May 1971 ---------------------------------- 1685-76, 35 centsMinneapolis—St. Paul, Minn., Jan. 1971.------------------ 1685-44, 40 cents

1 Data on establishment practices and supplementary wage provisions are also presented.

Bulletin numberArea and price

Muskegon—Muskegon Heights, Mich., June 1971____ 1685-82, 30 centsNewark and Jersey City, N.J., Jan. 1971____________ 1685-47, 40 centsNew Haven, Conn., Jan. 1971 ------------------------------- 1685-35, 30 centsNew Orleans, L a ., J an. 1971 1------------------------------ 1685-36, 40 centsNew York, N .Y ., Apr. 1971---------------------------------- 1685-89, 65 centsNorfolk—Portsmouth and Newport News—

Hampton, V a., J an. 1971 1 --------------------------------- 1685-46, 35 centsOklahoma City, Okla., July 1971 1___________________ 1725-8, 35 centsOmaha, Nebr.—Iowa, Sept. 1971 1 -------------------------- 1725-13, 35 centsPaterson—Clifton—Passaic, N.J., June 1971------------ 1685-84, 35 centsPhiladelphia, Pa .-N .J ., Nov. 1970------------------------- 1685-34, 50 centsPhoenix, A r iz . , June 1971____________________________ 1685-86, 30 centsPittsburgh, Pa., J an. 1971 1__________________________ 1685-49, 50 centsPortland, Maine, Nov. 1971 1-------------------------------- 1725-22, 3 5 centsPortland, Oreg.—Wash., May 1971------------------ --- 1685-85, 35 centsProvidence—Pawtucket—Warwick, R.I.—M ass.,

May 1971 1 -------------------------------------------------------- 1685-80, 40 centsRaleigh, N.C., Aug. 1971_____________________________ 1725-5, 30 centsRichmond, Va., Mar. 1971____________________________ 1685-62, 30 centsRochester, N .Y. (o ffice occupations only),

July 1971 1 -------------------------------------------------------- 1725-7, 35 centsRockford, 111., May 1971______________________________ 1685-79, 30 centsSt. Louis, Mo.—111., Mar. 1971 1______________________ 1685-65, 50 centsSalt Lake City, Utah, Nov. 1970 1-------------------------- 1685-26, 35 centsSan Antonio, T ex ., May 1971 1------------------------------ 1685-81, 35 centsSan Bernardino—R iver side—Ontario, Calif.,

Dec. 1970 1____________________________________________ 1685-42, 40 centsSan Diego, C a lif., Nov. 1970_________________________ 1685-20, 30 centsSan Francisco—Oakland, Calif., Oct. 1970___________ 1685-23, 40 centsSan Jose, C a lif., Aug. 1971 1-------------------------------- 1725-15, 35 centsSavannah, Ga., May 1971____________________ -________ 1685-72, 30 centsScranton, P a ., July 1971______________________________ 1725-1, 30 centsSeattle—Eve rett, Wash., J an. 1971 1----------------------- 1685-52, 3 5 centsSioux Falls, S. Dak., Dec. 19701 ____________________ 1685-38, 35‘centsSouth Bend, Ind., Mar. 1971__________________________ 1685-61, 30 centsSpokane, Wash., June 1971---------------------------------- 1685-88, 30 centsSyracuse, N .Y ., July 1971 1__________________________ 1725-10, 35 centsTampa—St. Petersburg, Fla., Nov. 1970_____________ 1685-17, 30 centsToledo, Ohio—M ich., Apr. 1971 1--------------------------- 1685-74, 40 centsTrenton, N.J., Sept. 1971 ------------------------------------- 1725-12, 30 centsUtica—Rome, N .Y ., July 1971 1 ----------------------------- 1725-9, 35 centsWashington, D.C.—Md.—Va., Apr. 1971------------------ 1685-56, 40 centsWaterbury, Conn., Mar. 1971________________________ 1685-55, 30 centsWaterloo, Iowa, Nov. 1971----------------------------------- 1725-20, 30 centsWichita, Kans., Apr. 1971____________________________ 1685-64, 30 centsW orcester, M ass., May 1971________________________ 1685-73, 30 centsYork, Pa., Feb. 1971__________________________________ 1685-50, 30 centsYoungstown—Warren, Ohio, Nov. 1970_______________ 1685-24, 30 cents


FIRST CLASS MAILU.S. DEPARTMENT OF LABOR BUREAU OF LABOR STATISTICS

W A S H IN G T O N , O.C. 20212

O F F IC IA L BUSINESS

PENALTY FOR PRIVATE USE, $300

POSTAGE A N D FEES P A ID

U.S. DEPARTMENT OF LABOR


bls_1725-23_1972.pdf

Documents

e t r o p o

o c t o b e r

r e g i o n

b o r s t

area code

percents o f

end o f

c o n t e n t sp age1