Blaupunkt Freiburg CD 34

Radio / CD

http://www.blaupunkt.com

Alicante CD34 7 644 172 310

Freiburg CD34 7 644 194 310

Operating instructions

2

Open here

3

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

11

1 2 4 7

5

8

3

6

10 9

28

1 button for opening the de-tachable control panel (flip-re-lease panel)

2 Button to switch the device on/off and operate the volume mutefeature

3 BND button (band) to select ra-dio mode as the source,to select the FM memory banksand the MW and LW wavebandsTS to start the Travelstore func-tion

4 Volume control

5 TRAF button to switch traffic in-formation standby on/off.RDS button to switch the RDSfunction on/off (Radio Data Sys-tem).

CONTROLS6 AUDIO button to adjust the

bass, treble, balance and fader.To select an equalizer preset.For adjusting the X-BASS func-tion and activating/deactivatingit.

7 SRC button to switch betweenCD, CD changer (if connected)and AUX.

: Briefly display the clocktime.

8 Arrow buttons

9 MENU button to open the basicsettings menu

: Keys 1 - 6

; button to eject the CD fromthe device

29

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

CONTENTS

Notes and accessories .......... 30Road safety ................................... 30Installation ..................................... 30Accessories .................................. 30

Detachable control panel(flip-release panel) ................. 31

Switching on/off .................... 32

Adjusting the volume ............. 33Setting the power-on volume ......... 33Instantaneously decreasing thevolume (mute) ................................ 34Switching the confirmation beepon/off ............................................ 34Mute while telephoning(Freiburg CD34)............................ 34Telephone audio (Alicante CD34) .. 35

Radio mode ............................ 35Switching to radio mode ................ 35Convenient RDS functions............. 35Selecting the waveband /memory bank................................. 36Tuning into a station ....................... 36Setting the sensitivity of stationseek tuning .................................... 37Storing stations ............................. 37Storing stations automatically(Travelstore) .................................. 37Listening to stored stations ............ 37Scanning receivable stations(SCAN) ......................................... 37Setting the scanning time .............. 38Programme type (PTY) .................. 38Optimising radio reception ............. 39Configuring the display .................. 39

Traffic information .................. 40

CD mode ................................ 41Switching to CD mode .................. 41Selecting tracks ............................ 41Fast track selection ....................... 41Fast searching (audible) ................ 41Random track play (MIX) ............... 41Scanning tracks (SCAN) ............... 42Repeating tracks (REPEAT) ........... 42Pausing playback (PAUSE) ............ 42Configuring the display .................. 42Displaying CD text ......................... 42Traffic announcements in CD mode . 43Ejecting a CD ................................ 43

CD-changer mode ................. 44Switching to CD-changer mode ..... 44Selecting CDs ............................... 44Selecting tracks ............................ 44Fast searching (audible) ................ 44Configuring the display .................. 44Repeating individual tracks orwhole CDs (REPEAT) .................... 44Random track play (MIX) ............... 45Scanning all tracks on all CDs(SCAN) ......................................... 45Pausing playback (PAUSE) ............ 45

CLOCK - Time ........................ 46

Sound ..................................... 47

X-BASS .................................. 48

Configuring the level display . 49

Adjusting the brightness(dimmer)(only Alicante CD34) .............. 49

External audio sources .......... 50

Specifications ........................ 50

30

Thank you for choosing a Blaupunktproduct. We hope you enjoy using thisnew piece of equipment.

Please read these operating instruc-tions before using the equipment forthe first time.The Blaupunkt editors are constantlyworking on making the operating in-structions clearer and easier to under-stand. However, if you still have anyquestions on how to operate the device,please contact your dealer or the tele-phone hotline for your country. You willfind the telephone number printed at theback of this booklet.

We provide a manufacturer guaranteefor our products bought within the Eu-ropean Union. You can view the guar-antee conditions at www.blaupunkt.deor ask for them directly at:

Blaupunkt GmbH, Hotline CM/PSS,Robert Bosch Str. 200,D-31139 HildesheimGermany

Road safety Road safety has absolute prior-

ity. Only operate your car sound sys-tem if the road and traffic conditionsallow you to do so. Familiarise your-self with the device before setting offon your journey.You should always be able to hearpolice, fire and ambulance sirensfrom afar. For this reason, listen toyour car sound system at a reason-able volume level during your jour-ney.

NOTES AND ACCESSORIES

InstallationIf you want to install your car sound sys-tem yourself, please read the installa-tion and connection instructions thatfollow these operating instructions.

AccessoriesOnly use accessories approved by Blau-punkt.

Remote controlThe optional RC08 or RC10 remotecontrol allows you to access the mostimportant functions of your car soundsystem safely and conveniently fromyour steering wheel.

AmplifiersYou can use all Blaupunkt and Velocityamplifiers.

CD changersYou can connect the following BlaupunktCD changers:CDC A 08, IDC A 09 and CDC A 03.

Compact Drive MP3You can connect the Compact DriveMP3 instead of a CD-changer in orderto play MP3 music tracks. If you decideto connect a Compact Drive MP3, youwill first need to use a computer to storethe MP3 music tracks on the Micro-drive™ hard disk that is inside the Com-pact Drive MP3. Then, when the Com-pact Drive MP3 is connected to the carsound system, you can play the trackslike normal CD music tracks. You canoperate the Compact Drive MP3 in thesame way as a CD changer. Most ofthe CD-changer functions can also beused with the Compact Drive MP3.

31

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Note: The device will switch off after a

particular time period configured byyou. For further details, read thesection entitled “OFF TIMER” inthis chapter.

All the current settings are saved.

Any CD already inserted in the de-vice remains there.

Attaching the control panel Hold the control panel at approxi-

mately right angles to the device.

Slide the control panel into the de-vice’s guides that are positioned onthe left and right at the lower edgeof the housing. Push the controlpanel carefully into the bracket untilit clicks into place.

Flip up the control panel and care-fully press it into the device until itclicks into place.

1.

2.

DETACHABLE CONTROL PANEL

Detachable control panel(flip-release panel)

Theft protectionThe device is equipped with a detacha-ble control panel (flip-release panel) asa way of protecting your equipmentagainst theft. The device is worthlessto a thief without this control panel.

Protect your device against theft by tak-ing the control panel with you whenev-er you leave your vehicle. Do not leavethe control panel inside your vehicle -not even in a hiding place.

The control panel has been designedto be easy to use.

Note: Never drop the control panel.

Never expose the control panel todirect sunlight or other heat sourc-es.

Avoid direct skin contact with thecontrol panel’s electrical contacts. Ifnecessary, clean the contacts witha lint-free cloth and some alcohol.

Detaching the control panel Press the button 1.

The control panel opens out towardsyou.

Hold the control panel by its rightside and then pull the control panelstraight out of the bracket.

32

Switching on/offThere are various ways of switching thedevice on/off:

Switching the device on/off usingthe vehicle ignitionIf the device is correctly connected tothe vehicle’s ignition and you did notswitch it off by pressing button 2, thedevice will switch on/off simultaneouslywith the ignition.

Switching the device on/off usingthe detachable control panel

Detach the control panel.

The device switches off.

Note: The device will switch off after a

preset time period. For further de-tails, read the section entitled “Offtimer”.

Attach the control panel again.

The device switches on. The last set-ting (radio, CD, CD changer or AUX) willbe reactivated.

Switching on/off using button 2

To switch on the device, press but-ton 2.

To switch off the device, press andhold down button 2 for longerthan two seconds.

The device switches off.

Note: To protect the vehicle battery, the

device will switch off automaticallyafter one hour if the ignition is off.

Note: When attaching the control panel,

make sure you do not press thedisplay.

If the device was still switched on whenyou removed the control panel, it willautomatically switch on with the lastsettings activated (i.e. radio, CD, CDchanger or AUX) when the panel is re-placed.

Off timerAfter you detach the control panel, thedevice will switch off after a preset timeperiod. You can set this time to between0 and 30 seconds.

Press the MENU button 9.

Press the or button 8 re-peatedly until “OFF TIMER” ap-pears in the display.

Adjust the time using the but-tons 8.

When you have finished making yourchanges,

press the MENU button 9 twice.

Note: If you set the off-timer to 0 sec-

onds, the device will switch off im-mediately as soon as you open thecontrol panel.

CONTROL PANEL SWITCHING ON/OFF

33

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Switching on by inserting a CDIf the device is switched off and there isno CD present in the drive,

press the button 1.

The flip-release panel opens.

Gently insert the CD with its printedside uppermost into the drive untilyou feel some resistance.

The drive draws in the CD automatical-ly.

You must not hinder or assist the driveas it draws in the CD.

Gently close the control panelwhilst exerting a little pressure untilyou feel it click into place.

The device switches on and starts play-ing the CD.

Note: If the ignition was switched off be-

fore you inserted the CD, you willfirst have to switch on the deviceby pressing button 2 in order tostart playing the CD.

Adjusting the volumeYou can adjust the volume in steps from0 (off) to 66 (maximum).

To increase the volume,

turn the volume control 4 clock-wise.

To decrease the volume,

turn the volume control 4 anti-clockwise.

Setting the power-on volumeYou can set the device’s default power-on volume.


Press the or button 8 re-peatedly until “ON VOLUME” ap-pears in the display.

Adjust the power-on volume usingthe buttons 8.

To help you adjust the setting more eas-ily, the device will increase or decreasethe volume as you make your changes.

If you change the setting to “LAST VOL”,the volume when the device switcheson will be the same as the volume levelthat was set the last time you switchedthe device off.

Note: To protect your hearing, the power-

on volume is limited to a value of“38”. If the volume level was higherthan this when the device was lastswitched off and the “LAST VOL”setting is activated, the system willreset the volume to “38” when youswitch the device on again.

SWITCHING ON/OFF ADJUSTING THE VOLUME

34



Instantaneously decreasing thevolume (mute)You can instantaneously decrease thevolume (mute) to a level preset by you.

Briefly press button 2.

“MUTE” appears in the display.

Cancelling muteTo return to your previously set volumelevel,

briefly press button 2 again.

Setting the mute levelYou can set the device’s mute volumelevel.


Press the or button 8 re-peatedly until “MUTE LVL” appearsin the display.

Adjust the mute level using the buttons 8.



ADJUSTING THE VOLUME

Switching the confirmation beepon/offThe system will output a confirmationbeep for some functions if you keep abutton pressed down for longer than twoseconds, for instance, when assigninga radio station to a station preset but-ton. You can switch the beep on/off.


Press the or button 8 re-peatedly until “BEEP” appears inthe display.

Configure the beep using the buttons 8. “OFF” means the beepis off and “ON” means the beep isswitched on.


press the MENU button 9.

Mute while telephoning(Freiburg CD34)If your car audio system is equipped witha mobile telephone, it will automaticallyswitch to mute when you use the phone.This will only work if the mobile phoneis connected to the car audio systemas described in the installation instruc-tions.

The volume will be reduced to the con-figured volume mute level.

35

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Telephone audio(Alicante CD34)If your car sound system is connectedto a mobile telephone, the sound sys-tem’s volume will be muted as soon asyou “pick up” the telephone. The tele-phone call is then outputted over the carsound system’s loudspeakers. This re-quires that the mobile telephone be con-nected to the car sound system as de-scribed in the installation instructions.

You will need a cable for this with thefollowing Blaupunkt number: 7 607 001503.

If the sound system receives a trafficannouncement during a telephone call,the system will only play the traffic an-nouncement after you have finished thecall.

You can set the volume at which youwant telephone calls to be initially heard.


Press the or button 8 re-peatedly until “TEL VOL” appearsin the display.

Set your preferred volume level us-ing the buttons 8.



Note: You can use the volume control 4

to adjust the volume of a telephonecall whilst the call is being output-ted by the sound system.

Radio modeThis device is equipped with an RDSradio receiver. Many of the receivableFM stations broadcast a signal that notonly carries the programme but alsoadditional information such as the sta-tion name and programme type (PTY).

The station name appears in the dis-play as soon as the tuner receives it.

Switching to radio modeIf you are in CD, CD changer or AUXmode,

press the BND•TS button 3.

or

press the SRC ( ) button 7 re-peatedly until the memory bank(e.g. “FM1”) appears in the display.

Convenient RDS functionsThe convenient RDS functions AF (Al-ternative Frequency) and REGIONALextend your radio’s range of functions.

AF: If you activate this RDS func-tion, the radio automatically tunesinto the best receivable frequencyfor the station that is currently set.

REGIONAL: At certain times, someradio stations divide their pro-gramme into regional programmesproviding different content. You canuse the REGIONAL function to pre-vent the car radio from switching toalternative frequencies that aretransmitting different programmecontent.

RADIO MODEADJUSTING THE VOLUME

36

Note: REGIONAL must be activated/de-

activated separately in the menu.

Switching REGIONAL on/off Press the MENU button 9.

Press the or button 8 re-peatedly until “REG” appears in thedisplay. “OFF” or “ON” is displayedalongside “REG”.

To switch REGIONAL on/off, pressthe or button 8.


Switching the RDS function on/offIf you want to use the RDS functions(AF and REGIONAL),

press and hold down the TRAF/RDS button 5 for longer than twoseconds.

The RDS functions are active when anRDS symbol lights up in the display.

Selecting the waveband /memory bankThis device can receive programmesbroadcast over the FM frequency rangeas well as the MW and LW (AM) wave-bands. There are three memory banksavailable for the FM waveband (FM1,FM2 and FMT) and one for each of theMW and LW wavebands.

Six stations can be stored in each mem-ory bank.

To switch between the FM memorybanks (FM1, FM2 and FMT) and theMW and LW wavebands,

briefly press the BND•TS button3.

Tuning into a stationThere are various ways of tuning into astation.

Automatic station seek tuning

Press the or button 8.

The radio tunes into the next receiva-ble station.

Tuning into stations manuallyYou can also tune into stations manual-ly.

Note: You can only tune into stations

manually if the RDS function is de-activated.


Browsing through broadcastingnetworks (only FM)If a radio station provides several pro-grammes, you have the option of brows-ing through its so-called “broadcastingnetwork”.

Note: The RDS function must be activat-

ed before you can use this feature.

Press the or button 8 toswitch to the next station on thebroadcasting network.

Note: When using this feature, you will

only be able to switch to stationsthat you have received once beforealready. To receive the stations,use the Scan or Travelstore func-tion.

RADIO MODE

37

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Setting the sensitivity of stationseek tuningYou can choose whether the radioshould only tune into stations providinggood reception or whether it can alsotune into those with a weak reception.


Press the or button 8 re-peatedly until “SENS” appears inthe display.

Press the button 8.

The display shows the currently set sen-sitivity level. “SENS HI6” means that thetuner is set to the highest sensitivitysetting. “SENS LO1” means it is set tothe lowest sensitivity setting.

Set the sensitivity level that youwant using the buttons 8.



Note: You can set different sensitivity lev-

els for FM and MW or LW (AM).

Storing stations

Storing stations manually

Select the memory bank (i.e. FM1,FM2, FMT) that you want or one ofthe wavebands (MW or LW).

Tune into the station that you want.

Press and hold down one of thestation buttons 1 - 6 : for longerthan two seconds to assign the sta-tion to that button.

Storing stations automatically(Travelstore)You can automatically store the six sta-tions providing the best reception in theregion (only FM). The stations are storedin the FMT memory bank.

Note: Any stations that were previously

stored in this memory bank are de-leted in the process.

Press and hold down the BND•TSbutton 3 for longer than two sec-onds.

The storing procedure begins. “FMTSTORE” appears in the display. Afterthe process has completed, the radiowill play the station that is stored inmemory location 1 of the FMT memorybank.

Listening to stored stations Select the memory bank or wave-

band.

Press the station button 1 - 6 :that corresponds to the station thatyou want to listen to.

Scanning receivable stations(SCAN)You can use the scan function to brieflyplay all the receivable stations. You canset the scanning time in the menu tobetween 5 and 30 seconds.

Starting SCAN

Press and hold down the MENUbutton 9 for longer than two sec-onds.

RADIO MODE

38

Scanning begins. “SCAN” appearsbriefly in the display followed by a flash-ing display of the current station nameor frequency.

Cancelling SCAN and continuinglistening to a station


Scanning stops and the radio continuesplaying the station that it tuned into last.

Setting the scanning time Press the MENU button 9.

Press the or button 8 re-peatedly until “SCAN TIME” ap-pears in the display.

Set the scanning time that youwant using the buttons 8.



Note: The scanning time that you set is

also applied by the system to scan-ning carried out in CD and CD-changer mode.

Programme type (PTY)Besides transmitting the station name,some FM stations also provide informa-tion on the type of programme that theyare broadcasting. Your car radio canreceive and display this information.

For example, the programme types canbe:

CULTURE TRAVEL JAZZ

SPORT NEWS POP

ROCK CLASSICS

You can use the PTY function to selectstations of a particular programme type.

PTY-EONIf you specify the programme type andstart seek tuning, the radio will switchfrom the current station to a station ofthe selected programme type.

Note: If the tuner does not find a station

that corresponds to the selectedprogramme type, you will hear abeep and “NO PTY” appears brieflyin the display. The radio will thenretune to the station that it receivedlast.

If the tuned radio station or anotherstation on the broadcasting net-work broadcasts your selected pro-gramme type at a later point intime, the radio will automaticallyswitch from the currently tuned sta-tion or from CD mode or CD-changer mode to the station whoseprogramme type matches the oneyou selected.

Switching PTY on/off


Press the or button 8 re-peatedly until “PTY ON” or “PTYOFF” appears in the display.

Press the or button 8 toswitch PTY ON or OFF.


RADIO MODE

39

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Selecting the PTY languageYou can select the language in whichthe programme types are displayed.The following are available:“DEUTSCH”, “ENGLISH” and“FRANÇAIS”.


Press the or button 8 re-peatedly until “PTY LANG” appearsin the display.

Set your preferred language usingthe buttons 8.



Selecting a programme type andstarting seek tuning


The current programme type appearsin the display.

If you want to select another pro-gramme type, you can do so bypressing the or button 8whilst this display is visible.

The selected programme type appearsbriefly in the display.

Press the or button 8 tostart seek tuning.

The radio will then tune into the nextstation that it finds that corresponds toyour selected programme type.

Optimising radio reception

Treble reduction feature duringinterference (HICUT)The HICUT function improves receptionduring poor radio reception (only FM).If interference occurs, the system auto-matically reduces the treble thus reduc-ing the interference level.

Switching HICUT on/off Press the MENU button 9.

Press the or button 8 re-peatedly until “HICUT” appears inthe display.

Press the or button 8 to ad-just the HICUT setting.

“HICUT 0” means that no automatic re-duction of the treble and interferencelevel will be made; “HICUT 1” meansthat a maximum reduction will be made.


Configuring the displayIn radio mode you have the option ofdisplaying the waveband together withthe memory location and the time or thestation name.


Press the or button 8 re-peatedly until “TUN DISP” appearsin the display.

Press the or button 8 toswitch between “CLOCK” and“FREQUENCY”.

Select “FREQUENCY” if you want todisplay the station name / frequency.

Press the MENU button 9 twice.

RADIO MODE

40

Traffic informationYour device is equipped with an RDS-EON receiver. EON stands for En-hanced Other Network.

Whenever a traffic announcement (TA)is broadcast, the system switches au-tomatically from a station that does notprovide traffic reports to the appropri-ate traffic information station within thebroadcasting network that does.

Once the traffic report has been played,the system will switch back to the pro-gramme that you were listening to be-fore.

Switching traffic informationpriority on/off Briefly press the TRAF button 5.

Traffic announcement priority is activewhen a traffic-jam symbol lights up inthe display.

Note:You will hear a warning sound:

if you leave the reception area of atraffic information station that youare currently listening to.

if, while listening to a CD or CD inthe changer, you leave the recep-tion area of a traffic information sta-tion that the system is tuned into,and the subsequent automaticsearch cannot find a new traffic in-formation station.

if you retune the radio from a trafficinformation station to a station thatdoes not broadcast traffic informa-tion.

If you hear the warning sound, you caneither switch off traffic information pri-ority or tune into a station that broad-casts traffic information.

Setting the volume for trafficannouncements Press the MENU button 9.

Press the or button 8 re-peatedly until “TA VOLUME” ap-pears in the display.

Adjust the volume using the buttons 8.



Note: Using the volume control 4, you

can also adjust the volume duringa traffic announcement for the du-ration of that announcement.

Note: You can adjust the sound settings

and volume distribution settings fortraffic announcements. For furtherdetails, refer to the chapter entitled“Sound”.

TRAFFIC INFORMATION

41

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

CD modeYou can use this device to play stand-ard audio CDs, CD-Rs and CD-RWswith a diameter of 12 or 8 cm.

Risk of severe damage to theCD drive!Contoured CDs (shape CDs) are notsuitable for playback in this unit.We accept no responsibility for anydamage to the CD drive that mayoccur as a result of the use of un-suitable CDs.

Switching to CD mode If there is no CD inserted in the

drive,

press the button 1.

The flip-release panel opens.

Gently insert the CD with its printedside uppermost into the drive untilyou feel some resistance.

The drive draws in the CD automatical-ly.

You must not hinder or assist the driveas it draws in the CD.

Gently close the control panelwhilst exerting a little pressure untilyou feel it click into place.

The CD starts playing.

Note: If the ignition was switched off be-

fore you inserted the CD, you willfirst have to switch on the deviceby pressing button 2 in order tostart playing the CD.

If a CD is already inserted in thedrive,

press the SRC ( ) button 7 re-peatedly until “CD” appears in thedisplay.

Playback begins from the point at whichit was last interrupted.

Selecting tracks Press one of the arrow buttons 8

to select the next or previous track.

If you press the or button 8 once,the player will play the current trackagain from the beginning.

Fast track selectionTo quickly select tracks backwards orforwards,

press and hold down one of the / buttons 8 until fast-reverse /

fast-forward track selection begins.

Fast searching (audible)To fast search backwards or forwards,

press and hold down one of the buttons 8 until fast search-

ing backwards / forwards begins.

Random track play (MIX) Press the 5 MIX button :.

“MIX CD” appears briefly in the displayand the MIX symbol lights up. The nextrandomly selected track will then beplayed.

Cancelling MIX Press the 5 MIX button : again.

“MIX OFF” appears briefly in the dis-play and the MIX symbol disappears.

CD MODE

42

Scanning tracks (SCAN)You can briefly play all the tracks on theCD.

Press and hold down the MENUbutton 9 for longer than two sec-onds.

The next track will then be played brief-ly.

Note: You can set the scanning time. For

further details, please read the sec-tion entitled “Setting the scanningtime” in the “Radio mode” chapter.

Stopping SCAN and continuinglistening to a track

To stop scanning, press the MENUbutton 9.

The currently scanned track will thencontinue to be played normally.

Repeating tracks (REPEAT)If you want to repeat a track,

press the 4 RPT button :.

“RPT TRCK” appears briefly in the dis-play and the RPT symbol lights up. Thetrack is repeated continuously until youdeactivate RPT.

Cancelling REPEATIf you want to deactivate the repeat func-tion,

press the 4 RPT button : again.

“RPT OFF” appears briefly in the dis-play and the RPT symbol disappears.Normal playback is then resumed.

Pausing playback (PAUSE) Press the 3 button :.

“PAUSE” appears in the display.

Cancelling pause

Press the 3 button : while inpause mode.

Playback is resumed.

Configuring the displayYou can choose between two displaytypes for CD mode:

• Track number and clock time(“CLOCK”)

• Track number and playing time(“PLAYTIME”)


Press the or button 8 re-peatedly until “CD DISP” appearsin the display.

Press the or button 8 toswitch between “PLAYTIME” and“CLOCK”.


Displaying CD textSome CDs include CD text. The CD textmight contain the names of the artist,album and tracks.

You can allow the CD text to be dis-played as scrolling text every time youswitch to another track. The standarddisplay will appear again after the wholeCD text has been shown once. For fur-ther information, read the section enti-tled “Configuring the display”.

CD MODE

43

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Switching CD text on/off


Press the or button 8 re-peatedly until “CD TEXT” appearsin the display.

Switch the CD text function on(“TEXT ON”) or off (“TEXT OFF”)using the or button 8.



Traffic announcements in CDmodeIf you wish to receive traffic announce-ments in CD mode,

press the TRAF button 5.

Traffic announcement priority is activewhen a traffic-jam symbol lights up inthe display. For further details, read thechapter entitled “Traffic information re-ception”.

Ejecting a CD Press the button 1.

The flip-release panel opens out to-wards you.

Press the eject button ; next tothe CD compartment.

The CD is ejected.

Remove the CD and close the con-trol panel.

Note: If a CD is ejected, the drive will au-

tomatically draw it back in againafter 10 seconds.

You can also eject CDs whilst thedevice is switched off or whilst an-other audio source is activated.

CD MODE

44

CD-changer mode

Note: Information on handling CDs, in-

serting CDs and operating the CDchanger can be found in the oper-ating instructions supplied withyour CD changer.

Switching to CD-changer mode Press the SRC ( ) button 7 re-

peatedly until “CHANGER” ap-pears in the display.

The device starts playing the first CDthat the CD changer detects.

Selecting CDsTo move up or down to another CD,

press the or button 8 onceor several times.

Note: The device will ignore empty CD

slots in the changer and slots con-taining invalid CDs.

Selecting tracksTo move up or down to another trackon the current CD,

press the or button 8 onceor several times.

Fast searching (audible)To fast search backwards or forwards,

press and hold down one of the buttons 8 until fast search-

ing backwards / forwards begins.

Configuring the displayThere are five display options availablefor CD-changer mode:

• Track number and playing time

• Track number and clock time

• CD number and track number

• CD number and playing time

• CD number and clock time


Press the or button 8 re-peatedly until “CDC DISP” appearsin the display.

Press the or button 8 re-peatedly until the option that youwant appears in the display.


Repeating individual tracks orwhole CDs (REPEAT)To repeat the current track,

briefly press the 4 RPT button :.

“RPT TRCK” appears briefly and RPTlights up in the display.

To repeat the current CD,

press and hold down the 4 RPTbutton : for longer than two sec-onds.

“RPT DISC” appears briefly and RPTlights up in the display.

CD-CHANGER MODE

45

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Cancelling REPEATTo stop the current track or current CDfrom being repeated,

briefly press the 4 RPT button :.

“RPT OFF” appears and RPT disap-pears from the display.

Random track play (MIX)To play the tracks on the current CD inrandom order,

briefly press the 5 MIX button :.

“MIX CD” appears briefly and MIX lightsup in the display.

To play the tracks on all inserted CDs inrandom order,

press and hold down the 5 MIXbutton : for longer than two sec-onds.

“MIX ALL” appears briefly and MIXlights up in the display.

Cancelling MIX Briefly press the 5 MIX button :.

“MIX OFF” appears and MIX disappearsfrom the display.

Scanning all tracks on all CDs(SCAN)To briefly play all the tracks on all theinserted CDs in ascending order,

press and hold down the MENUbutton 9 for longer than two sec-onds.

“TRK SCAN” appears in the display andthe number of the current track flashes.

Stopping SCANTo stop scanning,

briefly press the MENU button 9.

The currently scanned track will thencontinue to be played normally.

Note: You can set the scanning time. For

further details, please read the sec-tion entitled “Setting the scanningtime” in the “Radio mode” chapter.

Pausing playback (PAUSE) Press the 3 button :.

“PAUSE” appears in the display.

Cancelling pause

Press the 3 button : while inpause mode.

Playback is resumed.

CD-CHANGER MODE

46

CLOCK - Time

Displaying the clock timeTo briefly display the clock time,

Press and hold down the SRC ( )button 7 until the clock time ap-pears in the display.

Setting the clock timeTo set the clock time,


Press the or button 8 re-peatedly until “CLOCK SET” ap-pears in the display.

Press the button 8.

The time appears in the display. Thehours flash and can be adjusted.

Adjust the hours using the /buttons 8.

Once the hours are set,

press the button 8.

The minutes flash.

Adjust the minutes using the /buttons 8.


Selecting 12/24-hour clockmode Press the MENU button 9.

“MENU” appears in the display.

Press the or button 8 re-peatedly until “24 H MODE” or“12 H MODE” appears in the dis-play.

Press the or button 8 toswitch between the modes.



Displaying the time continuouslywhen the device is off and theignition is onTo display the time when the device isoff and the vehicle ignition is on,



Press the or button 8 re-peatedly until “CLOCK OFF” or“CLOCK ON” appears in the dis-play.

Press the or button 8 toswitch between the ON/OFF set-tings.



Briefly displaying the time whenthe device is switched offTo briefly display the time when the de-vice is off,

press the SRC ( ) button 7.

The time is displayed for eight seconds.

CLOCK - TIME

47

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

SoundYou can adjust the sound settings (bassand treble) separately for each audiosource (radio, CD, CD changer, AUXand traffic announcements). The vol-ume distribution settings (balance andfader) apply to all the audio sources.

Note: You can only adjust the sound set-

tings for traffic announcementswhilst a traffic announcement is ac-tually being played.

Adjusting the bass Press the AUDIO button 6.

“BASS” appears in the display.

Press the or button 8 to ad-just the bass.


press the AUDIO button 6.

Adjusting the treble Press the AUDIO button 6.


Press the button 8 repeatedlyuntil “TREB” appears in the display.

Press the or button 8 to ad-just the treble.



Setting the left/right volumedistribution (balance)To adjust the left/right volume distribu-tion (balance),



Press the button 8 repeatedlyuntil “BAL” appears in the display.

Press the or button 8 to ad-just the balance (right/left).



Adjusting the front/back volumedistribution (fader)To adjust the front/back volume distri-bution (fader),



Press the button 8 repeatedlyuntil “FADER” appears in the dis-play.

Press the or button 8 to ad-just the fader (front/back).



SOUND

48

Equalizer presetsThis device is equipped with an equal-izer that has been preset with settingsfor the “ROCK”, “POP” and “CLASSIC”music styles.

To select an equalizer preset,



Press the button 8 repeatedlyuntil “POP”, “ROCK”, “CLASSIC” or“OFF” appears in the display.

Press the or button 8 to se-lect one of the presets or select“OFF” to switch off the equalizer. Ifyou select one of the presets,SOUND lights up in the display to-gether with the selected setting.



X-BASSThe X-BASS feature can be used toboost the bass at low volume levels.

Note: You can adjust the X-Bass settings

separately for each audio source(radio, CD, CD changer and AUX).

Adjusting the X-BASS boostsettingsYou can set the X-BASS boost in stepsranging from 1 to 3.

“XBASS OFF” means that the X-BASSfeature is switched off.

Press the AUDIO button 6.


Press the button 8 repeatedlyuntil “XBASS” appears in the dis-play together with the current set-ting.

Press the or button 8 re-peatedly until the setting that youwant appears in the display.



SOUND X-BASS

49

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Configuring the leveldisplayThe level display temporarily providesyou with a symbolic representation ofthe volume and audio settings whilst youare adjusting them.

When you are not changing any set-tings, the level display depicts the soundsystem’s output level. You can switchthe level display on/off.



Press the or button 8 re-peatedly until “PEAK LVL” appearsin the display.

Press the or button 8 toswitch between “PEAK ON” and“PEAK OFF”.



Adjusting the brightness(dimmer)(only Alicante CD34)The display brightness will change whenthe headlights are turned on/off if yourcar sound system is connected as de-scribed in the installation instructionsand your vehicle is equipped with theappropriate connections. You can ad-just the display brightness separately fornight and day in steps ranging from 1 -9. We recommend a setting of “6”.



Press the or button 8 re-peatedly until “DIM DAY” or “DIMNIGHT” appears in the display.

Press the or button 8 toswitch between the brightness lev-els.



LEVEL DISPLAY BRIGHTNESS (DIMMER)

50

External audio sourcesInstead of connecting a CD changer,you can connect another audio sourceequipped with a line output. Audio sourc-es can, for example, be portable CDplayers, MiniDisc players or MP3 play-ers.

The AUX input must be activated in themenu.

If you want to connect an external au-dio source, you will need an adaptercable. You can obtain this cable (Blau-punkt no.: 7 607 897 093) from yourauthorised Blaupunkt dealer.

Switching the AUX input on/off Press the MENU button 9.


Press the or button 8 re-peatedly until “AUX OFF” or “AUXON” appears in the display.

Press the or button 8 toswitch AUX on/off.



Note: If the AUX input is switched on, you

can select it by pressing the SRCbutton 7.

SPECIFICATIONSEXTERNAL AUDIO SOURCES

Specifications

AmplifierOutput power: 4 x 25 watts sine

in accordancewith DIN 45 324 at14.4 V4 x 45 watts max.power

TunerWavebands in Europe:FM : 87.5 - 108 MHzMW : 531 - 1602 kHzLW : 153 - 279 kHz

FM frequency response:35 - 16,000 Hz

CDFrequency response:

20 - 20,000 Hz

Pre-amp Out4 channels: 3 V

Input sensitivityAUX input : 2 V / 6 kΩ

Subject to changes!

12/03 CM/PSS 8 622 403 876

Blaupunkt GmbH

Service-Nummern / Service numbers / Numéros du service après-vente / Numeri del servizio di assistenza / Servicenummers /Telefonnummer för service / Números de servicio / Número deserviço / Servicenumre

Country: Phone: Fax: WWW:

Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com

Austria (A) 01-610 39 0 01-610 39 391Belgium (B) 02-525 5444 02-525 5263Denmark (DK) 44 898 360 44-898 644Finland (FIN) 09-435 991 09-435 99236France (F) 01-4010 7007 01-4010 7320Great Britain (GB) 01-89583 8880 01-89583 8394Greece (GR) 0030-210 94 27 337 0030-210 94 12 711Ireland (IRL) 01-4149400 01-4598830Italy (I) 02-369 62331 02-369 62464Luxembourg (L) 40 4078 40 2085Netherlands (NL) 023-565 6348 023-565 6331Norway (N) 66-817 000 66-817 157Portugal (P) 01-2185 00144 01-2185 11111Spain (E) 902-120234 916-467952Sweden (S) 08-7501500 08-7501810Switzerland (CH) 01-8471644 01-8471650

Czech. Rep. (CZ) 02-6130 0441 02-6130 0514Hungary (H) 01-333 9575 01-324 8756Poland (PL) 0800-118922 022-8771260

Turkey (TR) 0212-3350677 0212-3460040

USA (USA) 800-2662528 708-6817188

Brasil(Mercosur) (BR) +55-19 3745 2769 +55-19 3745 2773

Malaysia(Asia Pacific) (MAL) +604-6382 474 +604-6413 640

Blaupunkt Freiburg CD 34

Documents

printed side

jam symbol

fast search

compact drive

release panel

detachable

fm memory

car sound