BladeMount System6 Blades - · PDF fileW25 mm. (0.984 in.) L75 mm. (2.953 in.) W13 mm. (0.511 in.) L70 mm. (2.756 in.) W21 mm. (0.828 in.) L90 mm. (3.543 in.) W25 mm. (0.984 in.) L90
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Stryker Instruments4100 East Milham AvenueKalamazoo, MI 49001 USAt: 269 323 7700 f: 269 353 3026toll free: 800 253 3210
www.stryker.comFunded in part by
The information presented in this brochure is intended todemonstrate the breadth of Stryker product offerings.Always refer to the package insert, product label and/or userinstructions before using any Stryker product. Products maynot be available in all markets. Product availability is subjectto the regulatory or medical practices that govern individualmarkets. Please contact your Stryker representative if youhave questions about the availability of Stryker products inyour area.
Products referenced with TM designation aretrademarks of Stryker.Products referenced with ® designation areregistered trademarks of Stryker.
Only Stryker bladeshave the patentedStryker blade mount.
The PerformaceYou Expect
Chip ClearanceArea
Beveled Edge
• Soft Tissue Sparing – Ideal for MISand smaller incisions
• Lower friction with cutting blockreduces bur formation and galling
No Offset
• Constant blade thickness over entire length• Better fit in cutting jig for more accurate cuts• Reduced Skive
30% Stiffer Blade
• Less flex• Reduced Skive
Patent PendingTooth Design
• Unique center gap for bonechip clearance
• Teeth are oriented for optimal boneremoval. Outer teeth clear bone chipsaway from cut area. Inner teeth areoriented towards the center and feedchips into center gap and the chipclearance area