2135 2135 Series Earth Augers Blade-Type Boring Head Configurations Blade-type boring head configurations offer excellent digging performance for small, hand-held type earth auger products when drilling through unconsolidated soil classifications such as loams, sands, soft clays and granular rubbles. •25 mm (1 inch) diameter round auger drive connection •9.5 mm ( 3 ⁄8 inch) diameter auger pin connection. •Heavy-walled axle to better withstand bending and torque loads •Heavy-gauged, helicoid-type flighting for added structural strength •Flighting pitch set to minimize power required and to maximize the amount of loose soil removed from hole •Field replaceable, alloy steel cutting teeth, hot forged and heat treated to extend service life •Cutting blade side clearance extends out past the flighting to minimize wear and extend service life •Field replaceable, alloy steel centering screw bit, heat treated to extend service life The 2135 Blade-Type Series earth augers and auger extension are designed specifically for use with General 200 Series Hole Digging products and represent over five decades of auger design expertise and field experience. Available in 51 mm (2 inch) to 203 mm (8 inch) nominal diameters. Standard 760 mm (30 inch) effective auger digging length. The plain shaft-type auger extension can be used with all augers and increase the digging depth by 381 mm (15 inches). www.generalequip.com
2
Embed
Blade-Type Boring Head Configurations Boring Head Configurations Blade-type boring head configurations ... for small, hand-held type earth auger products when drilling through
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2135
2135 Series Earth AugersBlade-Type Boring Head Configurations
Blade-type boring head configurations offer excellent digging performance for small, hand-held type earth auger products when drilling through unconsolidated soil classifications such as loams, sands, soft clays and granular rubbles.
•25 mm (1 inch) diameter round auger drive connection
•9.5 mm (3⁄8 inch) diameter auger pin connection.
•Heavy-walled axle to better withstand bending and torque loads
•Heavy-gauged, helicoid-type flighting for added structural strength
•Flighting pitch set to minimize power required and to maximize the amount of loose soil removed from hole
•Field replaceable, alloy steel cutting teeth, hot forged and heat treated to extend service life
•Cutting blade side clearance extends out past the flighting to minimize wear and extend service life
•Field replaceable, alloy steel centering screw bit, heat treated to extend service life
The 2135 Blade-Type Series earth augers and auger extension are designed specifically for use with General 200 Series Hole Digging products and represent over five decades of auger design expertise and field experience. Available in 51 mm (2 inch) to 203 mm (8 inch) nominal diameters. Standard 760 mm (30 inch) effective auger digging length. The plain shaft-type auger extension can be used with all augers and increase the digging depth by 381 mm (15 inches).
All specifications are general in nature and are not intended for specific application purposes. General Equipment Company reserves the right to make changes in design, engineering, or specifications and to add improvements or discontinue manufacture at any time without notice or obligation. Consult applicable Operator Manual before utilizing. Names depicted are the registered trademarks of their respective owners.