7/25/2019 Black Labrador
1/14
www.ArtTutor.com 1
Pet portraits are extremely
popular with my students,and I wanted to take the
opportunity to demonstrate a
pet portrait done entirely in
acrylics. I will be using my
own mix of fluid retarder andgel retarder, which I mix to
approximately 50/50; thisprovides me with a much
more fluid gel giving me
similar consistency to linseed
oil or Liquin when using oils,
and allows me to work wet
into wet for softer blending.
Acrylics are a wonderful
medium but dry very quickly,
I hope to demonstrate that by
using this method you can
still blend similar to an oil
portrait whilst benefitting
from the fast drying times.
I have chosen this beautiful photograph of this old black Labrador; I
particularly love the !pose of this dog and the soft and gentleexpression. A good pose is crucial for a great portrait; I have found it is
best to get a friend to help take the photograph of your pet, so that you
can get down to the dogs eye level whilst a friend helps keep the dogs
attention with a treat or toy. I have also chosen this photo becausepainting black can be a challenge, but I wanted to demonstrate the
colours that go into a black coat.
ACRYLICS
DEMONSTRATION
Faithful FriendBy Marion Dutton
7/25/2019 Black Labrador
2/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 2
Materials
Fluid retarder (50.50) gel and fluid mix (see above details)
Burnt umber
Raw siennaTitanium whiteCadmium yellow
Dioxazine purple
Payne's grey
Cadmium orange
Alizarin crimson
Ultramarine blue
Sap greenIvory Black
Blending brush
Flat brush
Rake brush
Small detail brush script liner
7/25/2019 Black Labrador
3/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 3
The Initial Sketch
Transfer the drawing onto the canvas. I used an opaque projector to
project the photograph directly onto the canvas, however there are
many options to transfer your drawing. If you are confident with your
drawing skills you can draw free hand directly onto your canvas.
Alternatively you can print an A4 photograph and use tracing paper to
trace this, the traced image can then be enlarged to the size of canvas at
a stationary store.
This image can then be placed onto your canvas with a sheet of carbonpaper underneath simply trace over your lines. Alternately the grid
method can be used.
I always use a fixative over my pencil lines before beginning painting to
prevent my initial sketch from smudging. Note how I have created a
pattern on the dog mapping the highlights and shadow areas to help me
when I begin the under painting.
7/25/2019 Black Labrador
4/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 4
Step 1: Underpainting
I begin by applying my ready-made mixed fluid retarder over the entire
surface of the drawing. Then, using a light wash of burnt umber, I begin
the under painting: the aim of the under painting is to create an entire
portrait in one colour.
I use a q tip to remove areas of
wet paint in the lighter areas,and darken the shadow areas
by reducing the amount of fluid
retarder mixed with the burnt
umber: with an under painting
you begin with the lighter
shades and gradually workyour way up to the darkest
darks.
Here you can see the finished
under painting in one colour.Notice how I have removed
areas of paint in the lighterareas; also, even at this early
stage, I keep all my strokes in
the direction of the hair
growth.
I allow this stage to dry
completely before moving ontothe background. (With acrylics
you can speed the drying time up by using a hairdryer.)
7/25/2019 Black Labrador
5/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 5
Step 2: Blended Background
I want the background to be soft and muted, and to complement thedogs coloring. Even though the dog is black, he will have a purplish hue
to him; I have therefore chosen to go with a yellow toned background as
yellow is a complement to purple.
I apply fluid retarder to the entire background area and work wet into
wet (you do have to work quickly with acrylics). Using a large flat
brush, I apply a mix of raw sienna and white. Whilst this colour is still
wet I work in brighter areas of cadmium yellow to the upper areas of thedog; I also bring this colour slightly behind the dog on the right hand
side.
I like to add hints of the dogs colours to the background, so I add small
touches of dioxazine purple to the lower canvas and slightly to the
upper right: I use a soft blending mop to blend these colours together for
a muted effect. Allow this step to dry.
This is the first layer of the background, this step will be repeated to
create a rich muted background. Ensure your background is dry before
proceeding to the first colour layers on the dog.
7/25/2019 Black Labrador
6/14
7/25/2019 Black Labrador
7/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 7
Still working wet into wet I
begin adding the lighter value
to the highlighted areas of the
dog again softening as I go
with a blending brush. This
step must be completedquickly, using plenty of fluid
retarder to enable soft
blending. Allow to fully dry
before repeating this step.
I repeated this step threetimes.
a)Apply middle tone over
the entire dog with LOTS of
fluid retarder.
b)
Work the dark areas wetinto wet.
c)Work the highlights wetinto wet blend and keep
strokes soft. Follow the
direction of the hair.
Here is the portrait after
the three layers on the coat
and two layers to the
background. Keep
everything soft. Allow to
fully dry before moving to
the next stage.
7/25/2019 Black Labrador
8/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 8
Step 4: Eye & Nose Details
Wet the eyes with fluid retarder
and work wet into wet. Cover the
iris in burnt sienna and add a
secondary highlight of cadmium
orange whilst still wet. Put this in
diagonally opposite to the bright
gleam and gently blend into the
sienna.
Add a smaller brighter highlight of
cadmium yellow and a touch of
white. Softly blend.
Add grey white to the whites of
the eyes using titanium white andpaynes grey whilst this is wet
add touches of alizarin crimson
for a slight pinkish hue.
The pupil is black but must be drybefore beginning the highlights.Over the dried black pupil drag
ultramarine blue across the top half
of the iris in a half moon shape: this
represents the sky reflecting in the
dogs eye. Finish by adding a bright
dot of pure white for the brightest
gleam.
7/25/2019 Black Labrador
9/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 9
The nose is done similar to the dogs coat using our three values: cover
the nose in the middle value and lots of fluid retarder; working wet into
wet, then add the darkest darks and the lightest lights. Allow to dry.
Once dry tap on some very bright highlights (with the light value and a
touch of white) to represent the texture and wetness of a dogs nose.
7/25/2019 Black Labrador
10/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 10
Step 5: Collar Details
Block in the collar using alizarin crimson, sap green and raw sienna.
Highlight the alizarin part with cadmium red; highlight the raw sienna
and green part with cadmium yellow. Add a white trim and a slighttouch of paynes grey where the white areas go into shadow. Allow tofully dry.
7/25/2019 Black Labrador
11/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 11
Step 6: Rake Brush Details
Using a rake brush and
the lightest value of
mixture (from the first
step), I begin very lightlyto add small hair details. Iam working on a dried
canvas at this stage, but
thinning the paint with
the fluid retarder gel.
The aim of this stage is to
cover the dog with smallhair details, which will be
later glazed back with adarker value: it is very
important that all the
strokes follow the
direction of the hair.
Here you can see the
whole dog now has small
hair-like strokes of a lightvalue: this must now be
dried before beginning the
glazing.
7/25/2019 Black Labrador
12/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 12
Step 7: Glazing & WhiskersI am working on a dried canvas.
I mix Ivory black with dioxazine
purple and thin this mixture
down to an inky texture (it
needs to be thin enough thatyou can still see the small hairs
underneath). Use a flat brush
and the thin dark glaze to
reinforce all the shadow areas,
following the direction of the
hair growth. Allow to dry.
Using a liner brush and a thin mix of the lightest value (mixed from the
first step and then thinned with fluid retarder), add some whiskers to
the dog. This is best done when the canvas is fully dried so any that are
too big can simply be wiped off.
7/25/2019 Black Labrador
13/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 13
The Finished Outcome
Completing a successful pet portrait requires the building-up of many
layers. Dont be afraid to repeat an area over and over to get the
necessary depth and richness. I mostly use a three-step process both in
acrylics and in oils (middle, a highlight and a dark), working andblending the lights and darks into the base/middle tone. It is only after
several layers do I begin to add details such as the small hairs around
the muzzle and eyes etc. Though I would complete an oil portrait in the
same way, the drying time would be much greater; the joy of acrylics is
that you can work wet into wet, but then dry the area with a hairdryer
and quickly move onto the next stage.
7/25/2019 Black Labrador
14/14
Faithful Friend by Marion Dutton
www.ArtTutor.com 14
About Marion Dutton
Marion is a portrait and pet portrait
artist and paints regularly to
commission. She is also an
Alexander Certified Art Instructorand now enjoys sharing her passion
for painting with her students.
Marion mostly paints in oils and
acrylics, but often does pencil
portraits too.
See Marions full profile at:
www.ArtTutor.com/artists/Marion-Dutton
Find the following guides and more at
www.ArtTutor.com
Preserving Whites
by Karl Fletcher Floral Still LifeBy Lucy Somers
Making Charcoal
by James WoodStrawberries
by Karl Fletcher