Black and Decker PS1800 Case Replacement This guide will illustrate how to open the outer case of the Black and Decker PS1800. Written By: Christian Aldrich Black and Decker PS1800 Case Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Black and Decker PS1800 Case ReplacementThis guide will illustrate how to open the outer case of the Black and Decker PS1800.
Written By: Christian Aldrich
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4
INTRODUCTION
This guide will illustrate how to open the outer case of the Black and Decker PS1800.
TOOLS:Phillips #00 Screwdriver (1)
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 4
Step 1 — Open the Outer Drill Case
Lay drill on its side, assuring that the drill-holes are facing upwards.
Use a Phillips-head screwdriver (#00) to remove all seven screws (12mm).
Step 2
After the screws are removed,separate the clam-shell (outer drillcase) in order to reveal the drill'sinner components.
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2018-03-23 06:25:28 AM.
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 4
Related Documents
