Konica Minolta bizhub C451 Specification & Installation Guide bizhub C451 Specifications Type Full Color Printer/Copier/Scanner Document holder Stationary (mirror scanning) Photoconductor OPC Luminous source White inert gas fluorescent lamp Copying System Laser electrostatic copy method Developing System Dry-type dual-component HMT developing method Fusing System Belt IH Fusing Resolution Scanning: 600 x 600 dpi Printing: 800 (equivalent) x 600 dpi Document holder Types: Sheets, books (page spreads), three-dimensional objects size: Maximum " x 7" WeighT: 4.5 lb. (three-dimensional objects) Paper Plain Paper (7 lb. bond to 24 lb. bond) Thick Paper (24.25 lb. bond to 32 lb. bond) Thick Paper + (32.25 lb. bond to 4.75 lb. bond) Thick Paper 2 ( 42 lb. bond to 55.5 lb. bond) Thick Paper 3 (55.75 lb. bond to 68 lb. bond) Thick Paper 4 (68.25 lb. bond to 79.75 lb. bond)* OHP Transparencies*, Postcards**, letterhead, colored paper, envelopes*, label sheets* *Can only be fed through the bypass tray. **Can only be fed through the bypass tray or tray 3 or 4 (for tray 3 or 4, the setting must be changed by an authorized Konica Minolta Service Technician). Copy Sizes 1sT & 2nd Tray: 2" x 8" to 8.5" x ", 2.25" x 8", 8" x 3" 3rd & 4Th Tray: 8.5" x "*, 5.5" x 8.5", 4" x 6" Bypass Tray: 2" x 8" to 5.5" x 8.5", 2.25" x 8", 4" x 6", 8" x 3" * This setting must be changed by an authorized Konica Minolta Service Technician. Paper tray Capacity 1sT & 2nd Tray: Plain Paper: 500 sheets; Thick Paper : 400 sheets; Thick Paper +: 280 sheets; Thick Paper 2: 250 sheets; Thick Paper 3: 200 sheets 3rd Tray: Plain Paper: 500 sheets; Thick Paper : ,50 sheets; Thick Paper +: 800 sheets; Thick Paper 2: 700 sheets; Thick Paper 3: 600 sheets; Postcards: 200 sheets or less 4Th Tray: Plain Paper: 000 sheets; Thick Paper : 750 sheets; Thick Paper +: 500 sheets; Thick Paper 2: 450 sheets; Thick Paper 3: 400 sheets; Postcards: 200 sheets or less continued Paper tray Capacity Bypass Tray: Plain Paper: 50 sheets; continued Thick Paper : 00 sheets; Thick Paper +: 80 sheets; Thick paper 2: 70 sheets; Thick Paper 3: 60 sheets; Thick Paper 4: 50 sheets; OHP Transparencies: 20 sheets; Postcards/Label Sheets: 50 sheets; Envelopes: 0 Copy exit tray Plain Paper: 250 sheets capacity Thick Paper: 0 sheets Overhead Projection Transparencies: sheet Warm-up time Less than 30 seconds (at room temperature/73.4° F) Image loss width Leading edge: 0.875" Trailing edge: 0.25" Rear edge: 0.25" Front edge: 0.25" First copy* Full Color: 6.5 seconds or less Black: 4.8 seconds or less *when printing letter portrait Print Speed*: Full Color: (Full Color/B&W) 45 ppm (letter) single-sided; 45 sides/min (letter) double-sided B&W: 45 ppm (letter) single-sided; 45 sides/min (letter) double-sided *Using st Tray Magnification Ratios .0 (full size: .00+0.5% or less Enlarge: 2.4%, 29.4%, 54.5%, 200% Reduce: 78.5%, 73.3%, 64.7%, 50.0% Minimal: 93%* Zoom: 25% to 400% (in 0.% increments) Stored Zoom Ratios: 3 *“Minimal” zoom ratio (90% to 99.9%) Multiple copies to 9,999 sheets Density control Copy Density: Manual Density Adjustment (9 Levels); Background Density: Automatic and manual density adjustment (9 levels) Power requirements 20V, 20 A, 60 Hz Power consumption ,920 W or less Space requirements *2 82.25" (W) x 62" (D) Dimensions 25.5" (W) x 30.5" (without control panel) / 36" (with control panel) (D) x 45.25" (H) Memory (available ,024 MB (60GB HDD) hard disk space) Weight Approx. Approx. 48.5 lb. * There are five Foolscap sizes: 220 x 330 mm, 8.5" x 3", 8.25" x 3", 8.5" x 3.25" and 8" x 3". Any one of these sizes can be selected. For details, contact the technical representative. *2 The indicated space requirements represent the space needed for C45 equipment with FS-59 internal finisher. (continued)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
bizhub C451 Specifications Type Full Color Printer/Copier/Scanner
Document holder Stationary (mirror scanning)
Photoconductor OPC
Luminous source White inert gas fluorescent lamp
Copying System Laser electrostatic copy method
Developing System Dry-type dual-component HMT developing method
Fusing System Belt IH Fusing
Resolution Scanning: 600 x 600 dpi Printing: �800 (equivalent) x 600 dpi
Document holder Types: Sheets, books (page spreads), three-dimensional objects size: Maximum ��" x �7" WeighT: 4.5 lb. (three-dimensional objects)
Paper Plain Paper (�7 lb. bond to 24 lb. bond) Thick Paper � (24.25 lb. bond to 32 lb. bond) Thick Paper �+ (32.25 lb. bond to 4�.75 lb. bond) Thick Paper 2 ( 42 lb. bond to 55.5 lb. bond) Thick Paper 3 (55.75 lb. bond to 68 lb. bond) Thick Paper 4 (68.25 lb. bond to 79.75 lb. bond)* OHP Transparencies*, Postcards**, letterhead, colored paper, envelopes*, label sheets* *Can only be fed through the bypass tray.
**Can only be fed through the bypass tray or tray 3
or 4 (for tray 3 or 4, the setting must be changed
by an authorized Konica Minolta Service Technician).
Copy Sizes 1sT & 2nd Tray: �2" x �8" to 8.5" x ��", �2.25" x �8", 8" x �3" 3rd & 4Th Tray: 8.5" x ��"*, 5.5" x 8.5", 4" x 6" Bypass Tray: �2" x �8" to 5.5" x 8.5", �2.25" x �8", 4" x 6", 8" x �3" * This setting must be changed by an authorized
Konica Minolta Service Technician.
Paper tray Capacity 1sT & 2nd Tray: Plain Paper: 500 sheets; Thick Paper �: 400 sheets; Thick Paper �+: 280 sheets; Thick Paper 2: 250 sheets; Thick Paper 3: 200 sheets 3rd Tray: Plain Paper: �500 sheets; Thick Paper �: �,�50 sheets; Thick Paper �+: 800 sheets; Thick Paper 2: 700 sheets; Thick Paper 3: 600 sheets; Postcards: 200 sheets or less 4Th Tray: Plain Paper: �000 sheets; Thick Paper �: 750 sheets; Thick Paper �+: 500 sheets; Thick Paper 2: 450 sheets; Thick Paper 3: 400 sheets; Postcards: 200 sheets or less continued
Paper tray Capacity Bypass Tray: Plain Paper: �50 sheets; continued Thick Paper �: �00 sheets; Thick Paper �+:
80 sheets; Thick paper 2: 70 sheets; Thick Paper 3: 60 sheets; Thick Paper 4: 50 sheets; OHP Transparencies: 20 sheets; Postcards/Label Sheets: 50 sheets; Envelopes: �0
Magnification Ratios �.0 (full size: �.00+0.5% or less Enlarge: �2�.4%, �29.4%, �54.5%, 200% Reduce: 78.5%, 73.3%, 64.7%, 50.0% Minimal: 93%* Zoom: 25% to 400% (in 0.�% increments) Stored Zoom Ratios: 3 *“Minimal” zoom ratio (90% to 99.9%)
Multiple copies � to 9,999 sheets
Density control Copy Density: Manual Density Adjustment (9 Levels); Background Density: Automatic and manual density adjustment (9 levels)
Power requirements �20V, 20 A, 60 Hz
Power consumption �,920 W or less
Space requirements*2 82.25" (W) x 62" (D)
Dimensions 25.5" (W) x 30.5" (without control panel) / 36" (with control panel) (D) x 45.25" (H)
Memory (available �,024 MB (60GB HDD) hard disk space)
Weight Approx. Approx. 4�8.5 lb.
*� There are five Foolscap sizes: 220 x 330 mm, 8.5" x �3", 8.25" x �3", 8.5" x �3.25" and 8" x �3". Any one of these sizes can be selected. For details, contact the technical representative.
*2 The indicated space requirements represent the space needed for C45� equipment with FS-5�9 internal finisher. (continued)
Electrical RequirementsLine options Dedicated NEMA Diagram for 5-20R
Voltage ��0 V/�20 to �27 V/ 220 to 240 V AC)
Amperage 20 A
Cycles 60
NEMA Part No. 5-20R
Cord Length 7.5 ft.
Note: The main electrical outlet must be located within 7.5 feet from the right rear corner
of the bizhub C45� main unit.
Environmental RequirementsTemperature 50 F to 86 F
Humidity �5% to 85%
Noise while engine under operation 75 db or less
Noise while feeder under operation 76 db or less
Ozone emission 2.0 mg/h
Fusing Range 239˚ to 365˚
bizhub C451 Specifications continued
Duty Cycle
Up to �50,000. Maximum monthly copy/print volume supported under standard vendor supplied service. Defines the upper end of the expected customer volume for the device. Customers should consider multiple machines if average monthly volume approaches duty cycle on a continual basis.
Component ConsiderationsauTomaTic duplex uniT (Standard)
Support Paper Type Plain Paper (�7 lb. bond to 24 lb. bond) Thick Paper � (24.25 lb. bond to 32 lb. bond) Thick Paper �+ (32.25 lb. bond to 4�.75 lb. bond) Thick Paper 2 (42 lb. bond to 55.5 lb. bond) Thick Paper 3 (55.75 lb. bond to 68 lb. bond)
Support Paper Size �2" x �8" to 5.5" x 8.5"; �2.25" x �8"; 8" x �3"
Other Receiving Functions Memory Reception, Confidential Reception, Polling Reception, Bulletin Function, Fax Forwarding (to any destination stored in the Address Book), TSI Routing (to any destination stored in the Address Book).
Fs-519 Base Finisher
Type Base Finisher
Output Trays Finishing Tray �, Finishing Tray 2
Support Paper Type Finishing Tray 1 & Finishing Tray 2: Plain Paper (�7 lb. bond to 24 lb. bond), Thick Paper �/�+/2/3 (24.25 lb. bond to 68 lb. bond), Overhead projector transparencies, postcards, envelopes, label sheets, letterhead. Punch Settings: Plain Paper (�7 lb. bond to 24 lb. bond), Thick paper �+/2 (24.25 lb. bond to 55.5 lb. bond) Staple Settings: Plain Paper (�7 lb. bond to 24 lb. bond), Thick paper � (24.25 lb. bond to 32 lb. bond)* *“Cover Mode” function: Thick paper �/�+/2 (24.25 to 55.5 lb.)
Support Paper Size 5.5" x 8.5", 8.5" x ��", ��" x �7", �2.25" x �8"
Mode Sort, Group, Sort/Offset, Group/Offset, Sort and Staple
Stacking Capacity ouTpuT Tray 1: Plain Paper (�7 lb. to 24 lb.): 200 sheets. Thick Paper (24.25 to 68 lb.), OHP, postcards, envelopes or label sheets, letterheads: 20 sheets ouTpuT Tray 2: Plain Paper (�7 lb. to 24 lb.): �,000 sheets of 8.5" x ��" or smaller, or 500 sheets of 8.5" x �4" or larger. Thick Paper (24.25 to 68 lb.), OHP, postcards, envelopes or label sheets, letterheads: 20 sheets
Staple Mode Paper Sizes: 8.5" x ��" to ��" x �7" (2 to 50 sheets)
Staple Capacity Plain Paper (�7 lb. bond to 24 lb. bond): 50 Sheets
Available Option PK-5�0 Punch Kit (2/3-hole Punch), Saddle Stitcher SD-505
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 66 W
Dimensions (W x D x H) �3.75" x �8.5" x 22.5" (When tray is pulled out �7.25 (W))
Support Paper Weight Plain Paper (�7 lb. bond to 24 lb. bond), Thick Paper (24.25 lb. bond to 55.5 lb. bond)
Support Paper Size 2-hole Punch Setting: ��" x �7" to 8.5" x ��"* 3-hole Punch Setting: ��" x �7" to 8.5" x ��"
Power Requirements Supplied from Finisher
Dimensions (W x D x H) 4.5"x �8.25" x 4.25"
Weight Approx. Approx. 4.25 lb.
* There are five Foolscap sizes: 220 x 330 mm, 8.5" x �3", 8.25" x �3", 8.5" x �3.25" and 8" x �3". Any one of these sizes can be selected. For details, contact the technical representative.
oT-503 ouTpuT Tray (Must be installed if no finisher is chosen)
Number of bins Exit Tray (�)
Paper Capacity 250 sheets
oT-602 addiTional ouTpuT Tray (Must be installed if no finisher is chosen)
Number of bins � bin
Paper capacity Plain paper (�7 to 24 lb.): Maximum 200 sheets; Thick paper (24.25 to 68 lb), postcards, envelopes, OHP, or label sheets, letterheads: Maximum 20 sheets
Dimensions (W x D x H) ��" x �4.5" x 2.25"
Weight �.5 lbs.
sd-505 saddle sTiTcher
Number of bins � bin
Paper types Plain paper (�7 to 24 lb), thick paper �/�+/2 (24.25 to 55.5 lb.)
Paper sizes 8.5" x ��", ��" x �7"
Paper capacity Plain paper (�3.25 to 24 lb.): Maximum 200 sheets or 20 sets
Staple settings Number of bound pages: 2 to �5 sheets
Dimensions (W x D x H) �7.5" x 8" x �8.75" When the tray is pulled out: 22.75" (W) x ��" (D)
Stacking Capacity �25 sheets per bin (total 500 sheets)
Dimensions (W x D x H) �3.5" x 20" �5.25"
Weight Approx. �7.5 lbs.
Power requirements Supplied from finisher
lu-301 large capaciTy uniT
Type Large Capacity Cassette
Support Paper Type Plain Paper (�6 lb. bond to 24 lb. bond), Thick Paper � (24.25 lb. bond to 32 lb. bond) Thick Paper �+ (32.25 lb. bond to 4�.75 lb. bond); Thick Paper 2 (42 lb. bond to 55.5 lb. bond) Thick Paper 3 (55.75 lb. bond to 68 lb. bond)
Support Paper Size 8.5" x ��"
Paper Capacity Plain Paper: 3,000 sheets Thick Paper �: 2,500 sheets Thick Paper �+: �,750 sheets Thick Paper 2: �,550 sheets Thick Paper 3: �,300 sheets
Support OS** Windows NT 4.0 SP6, 2000 SP3, XP, XP 64-BIT, Vista, Server 2003, Server 2003 64-BIT or later Mac OS 9.2 (PPD), Mac OS X �0.2, 3, 4; Mac OS �0.4 or later; Linux
Interface Standard Ethernet (�0 BaseT/�00 BaseTX/ �000 BaseT); Hi-Speed USB 2.0 (Optional EK-602 – for AU-�0� only)
Network FunctionsSending the Scanned Data in an Email MessageThe scanned data can be sent to a specified Email address. The destination is specified from the touch panel of this machine, and the scanned data is sent as an Email attachment.
Sending the Scanned Data as Files (FTP)The scanned data is uploaded to a specified FTP server. The FTP server address, login password, and other information are entered from the touch panel of this machine. The data files uploaded to the FTP server can be downloaded from a computer on the network.
Sending the Scanned Data to a Computer on the Network (SMB)The scanned data can be sent to a shared folder on a specified computer. The name of the destination computer, login password, and other information are entered from the touch panel of this machine.
Saving the Scanned Data in BoxesThe scanned data can be saved in boxes created on the machine’s internal hard disk. The data can be used in other applications. The file name can be entered from the touch panel of the machine.
Using the Machine as a ScannerThis machine can be used as a scanner. The scanner can be controlled from a PC connected to the network, and the scanned image can be loaded into an application on the PC to be processed.
Print Drivers Page Description Language Printer Driver Supported Operating Systems
PCL (PCL XL v. 3.0) Konica Minolta Windows NT 4.0 SP6, 2000 Emulation** SP3, XP, XP 64-BIT, Server
2003, Server 2003 64-BIT or later; Windows NT
PostScript 3 Konica Minolta Mac OS 9.2 (PPD), Mac OS X Emulation PostScript �0.2, 3, 4 (PPD+PDE print (30�5)** PPD Driver driver); Mac OS �0.4;
Intel (PPD+PDE Print Driver) ; Linux (PDD)
* The User Software CD-ROM contains the PCL Printer Driver and the PostScript Printer Driver CD-ROM contain the PostScript driver.
Print Specifications Item Specifications
Model Built-in print system
Power Supply Common with the main body
CPU MC7448 867 MHz
ROM �28 MB
RAM �024 MB
Hard Disk 60 GB
Interface Standard Ethernet (�0-Base-T, �00-BaseT or �000-Base-T) Standard USB 2.0
Frame Type Ethernet 802.2 Ethernet 802.3 Ethernet II Ethernet SNAP
Compatible IBM PC or compatible and Macintosh Computers (PowerPC or Intel Processor)
Supported Server Windows NT 4.0 (SP6a), Windows 2000 Operating Server or Windows Server 2003 Systems***
Client Windows 2000, Windows XP or Windows NT 4.0 (SP6a), Mac OS 9.2 or later, Mac OS �0.2, �0.3 or �0.4
Printer PCL6: Windows 2000, Windows XP (Home/ Driver*** Professional) or Windows Server 2003
Printer Driver, Windows XP Professional x64, Windows Server 2003 x64 Printer Driver, Windows NT 4.0 Printer Driver
PS3: Windows 2003, Windows XP (Home/Professional), Windows Server 2003 Printer Driver, Windows XP Professional x64 Printer Driver; Mac OS 9.2 PPD File; Mac OS X �0.2 Printer Driver; Mac OS X �0.3 or �0.4 Printer Driver
Utility PageScope Web Connection Web Browsers: q Microsoft Internet Explorer 6.0 or later recommended (JavaScript enabled, cookies enabled) q Microsoft XML Parser MSXML 3.X must be installed when using Internet Explorer 5.5 q Netscape Navigator 7.02 or later (JavaScript enabled, cookies enabled) q Mozilla Firefox �.0 or later (JavaScript enabled, cookies enabled) q Adobe×× Flash (If “Flash” is selected
in view mode, version 7.0 or later plug-in is required)
Because information assets are critical, a company needs to effectively protect against the many security risks it faces.
�) Prevent leaks of proprietary, confidential or personal information 2) Prevent unauthorized use of equipment 3) Effective data encryption 4) Protect data from being altered, duplicated or deleted 5) Prevent unauthorized access to data via the Internet 6) Protect against cyber attacks 7) Manage log history
Protective Functions: • Delete Graphic Data (when disposing of) HDD Sanitizing • Delete Graphic Data (after each job) Job Erase • Lock Job (when printing confidential documents) • Protect data by requiring department name and 8-digit password • Account Track • HDD Lock • Prevent Unauthorized Use • Operation Log with 2,000-event memory • HDD Encryption • Copy Protection • Network Authentication • SMTP Authentication for Email • SSL/TSL Compatibility for PS Web Connection, PS Data Administrator and LDAP Server • Scan Data Encryption (TCP/socket SSL Compatibility) • LDAP Authentication • Box Operator Data Encryption • Verification of Box Data Receipt • IP Address Filtering • Biometric Authentication Unit • IPv6
Paper ConsiderationsPaper Size Conversion Chart
Paper Letter Letter R Legal Tabloid Statement Statement R
Measurement 8.5" x ��" ��" x 8.5" 8.5" x �4" ��" x �7" 5.5" x 8.5" 8.5" x 5.5"
Paper Type SpecificationsNormal (Plain Paper)The Normal paper is used for copying in general and is called “PPC paper.’ The normal paper is usually not a recycled paper. Specify [Normal] to the tray to which the normal paper or the recycled paper for copying is loaded.
Thick Paper 1Thick Paper � is paper weighing between 24.25 to 32 lb. bond It can be fed via any paper tray.
Thick Paper 1+Thick Paper �+ is paper weighing between 32.25 to 4�.75 lb. bond It can be fed via any paper tray.
Thick Paper 2Thick Paper 2 is paper weighing between 42 to 55.5 lb. bond It can be fed via any paper tray.
Thick Paper 3Thick Paper 3 is paper weighing between 55.75 to 68 lb. bond It can be fed via any paper tray.
Thick Paper 4Thick Paper 4 is paper weighing between 68.25 to 79.75 lb. bond It can be fed via any paper tray.
Book/NewsThe Book/News paper is used for a body part of a book. It is a highly opaque paper to prevent prints to be seen from the back, or a cream-colored paper for ease of reading. Specify [Book/News] to a tray to which this type of paper is loaded.
OHPSpecify [OHP] to a tray to which transparent films are loaded. It can be fed via the bypass tray (�0 sheets or less) or the first tray (20 sheets or less).
Recommended Paper Stocksplain paper
Classification Weight Brand of Paper Size
Plain Paper 22 lb. bond Konica Minolta 8.5" x ��" (80 gr) CF Paper
Plain Paper 22 lb. bond Konica Minolta ��" x �7" (80 gr) CF Paper
Plain Paper 22 lb. bond Konica Minolta �2" x �8" (80 gr) CF Paper
Thick Paper � 28 lb. bond Konica Minolta 8.5" x ��" (�05 gr) CF Paper
Thick Paper � 28 lb. bond Konica Minolta ��" x �7" (�05 gr) CF Paper
Thick Paper � 28 lb. bond Konica Minolta �2" x �8" (�05 gr) CF Paper
Thick Paper � 32 lb. bond Hammermill 8.5" x ��" (�20 gr) Color Copy Paper
– Photo White
cover sTocK
Classification Weight Brand of Paper Size
Thick Paper 2 60 lb. cover Hammermill 8.5" x ��" (�63 gr) Color Copy Cover
– Photo White
Thick Paper 3 80 lb. cover Hammermill 8.5" x ��" (2�6 gr) Color Copy Cover
– Photo White
Thick Paper 4 �00 lb. cover Hammermill 8.5" x ��" (2�7 gr) Color Copy Cover
How to build a bizhub C451 System (from start to finish)
Step 1: Base Unit
C451 Digital Color Printer/Copier/Scanner/Fax(Includes PS&PCL controller, 1,024 MB Standard Memory, DF-611 Reversing Document Feeder, Duplex Unit, 60 GB HD, Standard USB 2.0 (supports local printing) and CMYK imaging units)
Step 2: Document Handling
DF-611 Document Feeder (Standard)
Step 3: Paper Supply Option
LU-301 Large Capacity Unit (3,000 letter sheets)
Step 4: Output Options(Select a finisher or output tray)
FS-519 Base Finisher
OT-503 Output Tray(Required if no finisher is selected)