bio-tao

8/2/2019 bio-tao

1/42

Bio-Eagle Users Manual

1

Bio-Eagle

Biometrics

Time Attendance

&

Access Control

8/2/2019 bio-tao

2/42

2

Directory

1. Introduction........................................................41.1 Basic Concepts.................................................... 6

1.1.1 User Enrollment........................................................................6

1.1.2 User Verification.......................................................................71.1.3 Match Threshold Levels ...........................................................71.1.4 User ID Numbers......................................................................81.1.5 Authority (status) Levels...........................................................81.1.6 Start-up window........................................................................8

2.1 How to place the finger....................................... 9

2. Enrollment and Verification Procedures .......... 112.1 Enrolling Users.................................................. 11

2.2 Testing an Enrollment ....................................... 17

2.3 Enrolling a User with the Display Finger Option

On ............................................................................ 17

2.4 Verifying Your Identity...................................... 172.4.1 Start-up window......................................................................182.4.2 Password Verification.............................................................182.4.3 ID number & Fingerprint........................................................19

2.5 Hints for Successful Enrollments...................... 20

3. System Options................................................ 223.1 System Options ................................................. 22

3.1.1 Date Time ...............................................................................233.1.2 Changing the Default Language .............................................233.1.3 Advanced Options...................................................................23

3.2 Power Manager ................................................. 24

3.3 Communication Option..................................... 253.4 Log Options....................................................... 26

3.5 Access Options .................................................. 26

3.6 Auto Test............................................................ 27

4. Download fingerprints & AC Records............. 27

8/2/2019 bio-tao

3/42


3

4.1 Install Attendance Management System........... 27

4.2 Connect PC and Bio-Eagle with RS232 ........... 28

4.3 Setup PC Com port rate:115200 or 9600.......... 28

4.4 Connecting and Download AC Records ........... 31

4.5 Upload staff's name to TAP-01 ......................... 35

4.6 Connect PC and TAP-01 with TCP/IP.............. 38

5. System Information.......................................... 39

6. Trouble shooting .............................................. 39

8/2/2019 bio-tao

4/42

4

1. Introduction

This chapter shows the Bio-Eagle Fingerprint T&A basic concepts

and how to place the finger.

Figure (Model:Bio-Eagle)

Figure (Model:Bio-Eagle) keypad

1 2 3 ESC

4 5 6

7 8 9

0 OK MENU

8/2/2019 bio-tao

5/42


5

Keypad Definition

Confirm the current present.

Access to manage.

Escape or cancel.

Scroll up.

Scroll down.

Power button.

Numerical key.

8/2/2019 bio-tao

6/42

6

1.1 Basic Concepts

This section contains definitions and descriptions of Time Recorder

Fingerprint T&A Concepts, including:

User Enrollment

User Verification

Match Threshold Levels

User ID Numbers

Authority (Status) Levels

The two most important TimeClock Fingerprint T&A Functions

are user enrollment and user verification.

1.1.1 User EnrollmentEnrollment is the process of create an ID number and scanning a

users finger to create a template three times. This template is

associated with a user ID number and stored.

During user verification, the stored template is compared to the

current fingerprint scan to confirm the users identity.

Enrollment is performed at designated Time Recorder units. The

user can verify on the time recorder that enroll his fingerprint. The

enrollment process takes approximately 2 seconds.Up to ten fingers can be enrolled for the same ID number, so the

user may have more verifications way.

Ideally, everyone finger on each hand should be enrolled so that if

the user injures the enrolled finger had, an alternate finger template is

8/2/2019 bio-tao

7/42


7

available. While recording the finger type is optional, it is

recommended such as left or right index, so that at verification the

user is prompted as to which finger to use.

1.1.2 User VerificationVerification occurs when a user either enters an ID number or

places a finger in the fingerprint sensor, then input password for

comparison with the stored template.

1.1.3 Match Threshold LevelsThe Mach Threshold is a number that represents the degree to

which verification is examined to ensure that the person is the person

claimed.

The Match Threshold Levels establishes a balance between False

Acceptance Rate (FAR) and False Rejection Rate (FRR). FAR measures

how often a non-authorized user is falsely recognized and granted

access to the system. FRR measures how often an enrolled and

authorized user, who should be granted access to the system, is

denied on the basis that the system did not recognize him.

You can set match threshold levels on a per-use basis. For the

fingerprint verification is difficult, you can adopt ID & Fingerprint

verification (match one to one).

Raising the threshold increases security, while lowering it

increases throughout. The correct balance is essential.

For users with worn or damaged fingers, match threshold levels

can (and should) be reduced.

Different sites have different requirements.

Table 1-1 Suggested Match Threshold Settings

FRR FAR One-to-many One-to-one

8/2/2019 bio-tao

8/42

8

High Low 45 25

Middle Middle 35 15

Low High 25 10

1.1.4 User ID NumbersBefore beginning fingerprint enrollment, a user is assigned User

ID Number. This ID number is used to call up the fingerprint

template each time that verification is requested.

ID numbers are normally called up via the keypad, but they can be

called up through other means such as RF Card.

1.1.5 Authority (status) LevelsTAS Clock Fingerprint T&A has four authority or status levels:

Users are people whose identity must be verified, such to gain

access to a facility or to have their attendance recorded.

Managers can do other operations, except set advanced option

and enroll managers authority.

Note: Without Manager status in the system, the Enroller will

enroll them.

1.1.6 Start-up windowClick the power button and the screen showed on, a display of a

window was called the Start-up window. The following appears:

Welcome

04-01-02 Thu

8/2/2019 bio-tao

9/42


9

2.1 How to place the finger

1.The correct way is:

Place a finger flatwise on the sensor surface

Place it to the center of the sensor surface

2.When registering, please place finger on sensor surface for about 1

second.

3.If the quality of finger registry is very bad, please register another

fingers to instead of.

Notice :

Correct Ways:

The area of finger on the sensor surface should be

larger.

Place a finger flatwise on the sensor surface

Place finger to the center of the sensor surface

8/2/2019 bio-tao

10/42

10

Incorrect Ways

Touching put on the left Put on the right

not straight Put on the lower place

Note: Please adopt the correct way to place the finger; this

company assumes no responsibility for errors from the use

of the Time Recorder. This company reserves the right to

revise document and to make changes from time to time in

the contents here of without obligation to notify any person

8/2/2019 bio-tao

11/42


11

of such revision or changes.

2. Enrollment and Verification Procedures

This chapter describes how to enroll and verify users on the

Fingerprint T&A verification system.

The following topics are included:

Enrolling User

Testing an Enrollment

Enrolling a User with the Display Finger Option On

Verifying Your Identity

Hints for Successful Enrollments

Note: You must have Enroller, Manager, or Supervisor status to

enroll users. For information on status levels, see Authority (Status)

Levels on 1.1.5.

2.1 Enrolling Users

If this is the first enrollment in a new or empty system, everyone

will become an enroller.If there is a manager in the system, you will have Manager status

to enroll a new user.

There are three ways of enrollment; fingerprint enrollment,

password enrollment, fingerprint & password are suitable for three

differences crowds. Fingerprint enrollment suited the most people

8/2/2019 bio-tao

12/42

12

who have better quality fingerprints; Fingerprint & Password suited

few people who enrolling successful, but verification was difficult;

Password enrollment suited 1% people who verification

unsuccessful.

To start the enrollment process, identify yourself firstly-press

[Menu], enter your ID number or fingerprint, and then verify your

identity.

Note: If this is the first enrollment in a new or empty system, you

will not be prompted for verification.

The following message appears on the display:

Press [OK], access the User Manager, the following message

display:

Press [OK], access the User Enrollment, the following message

display:

MENU

User Manage

Option

S s Info

User Manage

Enroll User

Enroll Admin

Delete

Enroll User

Enroll FP

Enroll Pwd

F & Pwd

8/2/2019 bio-tao

13/42


13

Fingerprint Enrollment

(1) Access the Enroll Fingerprint to press [OK], the followingdisplay:

(2) Press [OK], the following appears:

(3) Input the enrolling number (the range is 1 to 65534), press [OK],

the following appears:

(4) If the test is successful three times in a row, the following

appears:

Note: 00008-1

Enroll Fp

New Enroll

New Enroll

Enroll No. 0000000088

ESC OK

New Enroll

Place Finger

New Enroll

00008-1

ESC OK

8/2/2019 bio-tao

14/42

14

The last number 1 means the first fingerprint.

Press [OK], the previous message continues to be displayed while the

template is created.

If your identity cannot be verified, you are prompted to try again.

And you must restart the verification procedure (step 3).

2. Password Enrollment

(1) Access the password enrollment, press [OK], the following

appears:


(3) Input the enroll number (the range is 1 to 65534), press [OK], the

following appears:

Note: The password range is 1 to 5.

Enroll Pwd

New Enroll

New Enroll

Enroll No. 0000000088

ESC OK

New Enroll

Input Pwd *****

ESC OK

8/2/2019 bio-tao

15/42


15

(4) Input the password, press [OK], the following appears:

(5) Input the password again, press [OK], the following appears:

Note: 00008-P

The last letter P means password.

Press [OK], the previous message continues to be displayed while the

template is created.

3.Fingerprint & Password

Access the Fingerprint& Password, press [OK], the following

appears:


New Enroll

Input Pwd *****

Pwd Affirm *****

ESC OK

New Enroll

00008-P

ESC OK

Fp & Pwd

New Enroll

New Enroll

Enroll No 0000000088

ESC OK

8/2/2019 bio-tao

16/42

16

(3) Input the password (range is 1 to 65534), press [OK], the

following appears:

(4) If the test is successful three times in a row, the following

appears:

(5) Input your password, the following appears:

(6) Input the password again, press [OK], the following appears:

Note: 00008-1P

The second from the last 1 means one fingerprint

The last letter P means password.

New Enroll

Place Finger

New Enroll

Input Pwd *****

ESC OK

New Enroll

Input Pwd *****

Pwd Affirm *****

ESC OK

New Enroll

00008-1P

ESC OK

8/2/2019 bio-tao

17/42


17

Press [OK], the previous message continues to be displayed while

the template is created.

2.2 Testing an Enrollment

Ask the users to place their finger to perform a test verification. If

the test was successful, you will adopt Fingerprint enrollment. If the

poor quality of fingerprint, you will be recommended to use

Fingerprint & Password.

2.3 Enrolling a User with the Display Finger Option

On

Press [ESC] to the Display Dinger Option On, the following

appears:

Note: Where system memory permits, it is advisable to have at

least two fingers enrolled for a long-term user.

2.4 Verifying Your Identity

The workers used Fingerprint T&A to verify their identity. The system

defaults to three ways of verification: Fingerprint verification, Password

Enroll Fp

New Enroll

Backup Enroll

Enroll No 00008

ESC OK

ESC

8/2/2019 bio-tao

18/42

18

verification, ID number & Fingerprint. The following appears

2.4.1 Start-up windowPlace the finger on the sensor surface, the following appears:

It continues for about 0.5 seconds. If the test is successful, it will

say Thank you, the following appears:

If your identity cannot be verified, you are prompted to try again,

the following appears:

.

It continues for about 0.5 seconds, return to the start-up window.

2.4.2 Password VerificationTo start the enrollment process, enter your ID number, the

Fp Verify

Pls. Move finger

Fp Verify

Enroll No 00008

Fp Verify

Place finger Agn

8/2/2019 bio-tao

19/42


19

following appears:

Press [OK], the following appears:

Input correct password, press [OK], the following appears:

If the password cannot be verified, the following appears:

2.4.3 ID number & FingerprintTo start the enrollment process, enter your ID number, the

following appears:

11 Fp Match

Enroll No 0008

Pwd Affirm

Enroll No 0008

In ut Pwd *****

Pwd Affirm

Enroll No 0008

Verfied

Pwd Affirm

Enroll No 0008

8/2/2019 bio-tao

20/42

20

If your identity is verified, the following appears:

2.5 Hints for Successful Enrollments

The fingerprint is of good quality, the verification speed will fast;

otherwise, it will verify slowly or occur to FRR.

In order to improve the fingerprint verification quality, the

following hint appears:

Table 2-1 Enrolled unsuccessful or the fingerprint of poor quality

Dry or dirty fingerprints Solve the dry problems that rub the

dry finger and palm.

If the fingerprint is dry, you will

adopt the way of wetting up thefinger, such as rub the forehead

Have no enough to bring

pressure

The user should place a finger

firmly and squarely on the sensor

surface.

How to select the finger? Recommend to left or right index or

11 Fp Match

Enroll No 0008

11 Fp Match

Enroll No 00008

8/2/2019 bio-tao

21/42


21

middle finger. Use fingerprints of

good quality, without worn or hurt.

The user usually selects the

forefinger, if it was of a poor

quality, you will be recommended

to middle finger or ring finger.

How to place the finger? Place your finger firmly and touch

the sensor surface must be over 2/3.

The fingerprint does not touch

upright on the sensor surface. Do

not touch the finger too fast;

Do not move the finger on the

sensor surface

The influence of the

fingerprints change

For users with worn or damaged

fingers, the identification

can be influenced. If the finger

quality was poor, you will select

password verification.

Others However, few peoples fingerprint

quality is too poor to verify the

fingerprint in gear. Please use ID &

Fingerprint verification, and the

Match Threshold

Levels can be reduced or use

password verification.

8/2/2019 bio-tao

22/42

22

3. System Options

Press the [Menu], then verify your identity. The following appears:

Access Options, press [OK], the following appears:

The following topics included: System Options, Power Manage,

Communication Options, Log Options and Auto Test.

3.1 System Options

Access System Opt, the following appears:

The setup facility covers four areas: System Options, Language,

Lock and Advanced Options.

MENU

User Manage

Option

S s Info

Option

System Opt

Power Mn

System Opt

Date Time

Language Sch

8/2/2019 bio-tao

23/42


23

3.1.1 Date TimeAccess Date Time, the following appears:

To change the date, press and , then input the correct date

and time, press [OK]

3.1.2 Changing the Default LanguageAccess Language, press [OK], it defaults to SCH. Press to

select another language. Fingerprint T&A comes with three built-in

languages, simplified Chinese, traditional Chinese, and English for

all displays. Select the language that you will use, press [OK], then

Press [ESC] to return the Options. The system will ask for

confirmation of the displayed language. Press [OK] to accept the

language displayed.

3.1.3 Advanced OptionsAccess Advanced Option, press [OK], the following appears:

Date Time

2004-01-02

08:24:35ESC OK

8/2/2019 bio-tao

24/42

24

Press and to scroll up or down the screen to select the

option.

Restore Default: restore all setup information to default.

Clear all Data: delete all enrolling fingerprints and logs.

Delete Logs: delete all logs of flash disk.

Clear Managers rights: change the managers rights into ordinary

users rights.

Show Score: whether show the quality value of fingerprint in the

screen or not;

Match Threshold Levels: For helping in selecting threshold level

settings, see Table 1.1.3.

Sound: whether use to phonic hint or not.

3.2 Power Manager

Access Power Manage, the following appears:

This product uses smart manage system, supports the time switch

and resting features, it can satisfy the users different demands.

Shutdown: auto shut-off in the timed.

Power on: auto open-up in the timed.

Sleep: automatic resting in the timed, press any key to enter

Adv Option

Restore Default

Clear all Data

Power Mng

ShutDown No

Power On No

Power Mng

Sleep No

Idle No

8/2/2019 bio-tao

25/42


25

working state.

Idle and Idle Minute, they are related each other, while the idle

minute is zero, the idle is closed; while the idle minute is not zero

(unit was minute), for example, it is one minute, the user does not do

anything in one minute, the system will enter the idle state.

Select Shutdown, press [OK], the following appears:

Press [OK], then enter Shutdown, press [ESC] to cancel.

3.3 Communication Option

Access Comm Opt, the following message appears:

Time Recorder Fingerprint T&A support RS232, RS485, TCP/IP,

whether you use Single-Board Computer (SBC) or Networking,

Bio-Eagle will satisfy the users demands.

Device Number: machine ID; the range is 1 to 255.

Baud Rate: there are three options, 9600, 38400, 115200; the speed

of communication is fast, recommend to use RS232; the speed of

low communication is stable, recommend to use RS485.

IP address: it defaults to IP address is 192.168.1.201.

Net Speed: Auto is recommended..

Ethernet: whether use TCP/IP protocol or not.

ShutDown

Set OnTime Fun

Comm Opt

Dev Num

Comm Opt

Enthrnet No

RS232 Yes

8/2/2019 bio-tao

26/42

26

RS232: communication is RS232.

RS485: communication is RS485.

COMM Key: when connecting with PC, if there is a comm. Key,

you need to key in it., if there is not a comm. Key, you just left the

blank empty.

3.4 Log Options

Access Log Opt, the following message appears:

Alarm Attendance Log: when the remainder log capacity reached

set numerical value, it will automatically sound a warning that logs

were fulled.

Recheck Minute: Set within compass (Unit: minute). Someones

enrollment has enrolled, then, the log twice was not displayed in the

system.

3.5 Access Options

1.Define TZ

2.User Acc Opts

3.GRP TZ Define

4.Access Comb

5.Lock

Log Opt

Alm Attlog 1

ReCheck Min 0

8/2/2019 bio-tao

27/42


27

3.6 Auto Test

Access auto test, the following message appears:

In the option, you can run system device test. When the device

broken down, it can analyze the cause of the devices fault and the

devices were quickly and easily maintained.

It tests the Memory, LCD, Sound, Fingerprint sensor, keypad and

clock. In the course of test, you should guarantee the stability of the

power. Otherwise, the systems hardware was probably damaged;

especially it runs the memory test.

4. Download fingerprints & AC Records

1.Install Attendance Management System

2.Connect PC and TAP-01 with RS232

3.Setup PC COM port rate: 115200

4.Connecting and Download AC Records

5.Upload staff's name to TAP-01

4.1 Install Attendance Management System

Insert Disk to CD Rom and start setup procedure and complete

it.(if there are any update program, please execute it, too)

Auto Test

Run All Test

FLASH Test

Auto Test

Fp Reader

Ke Test

8/2/2019 bio-tao

28/42

28

4.2 Connect PC and Bio-Eagle with RS232

Make sure the switch of controller is pointed at RS232/RS485

The communication for TAP-01 is RS232

Menu->OptionComm. OptRS232Yes

Connect PC and Bio-Eagle with RS485

4.3 Setup PC Com port rate: 115200 or 9600

if connected with RS232, 115200 is recommended, if with RS485, 9600

is recommended

8/2/2019 bio-tao

29/42


29

(1)

(2)

(3)

8/2/2019 bio-tao

30/42

30

(4)

8/2/2019 bio-tao

31/42


31

(5)

4.4 Connecting and Download AC Records

(1)Double-click on shortcut on desktop

(2)Active this product

8/2/2019 bio-tao

32/42

32

(3)Click Yes

(4)Make sure settings are correct, then click Connect

8/2/2019 bio-tao

33/42


33

(5)Product active succeed

(6)Enter Time Recorder Communication, and again just do the same

like step 4

(7) Check Download user Info, then click Execute button to

download User name and password.

8/2/2019 bio-tao

34/42

34

(8) Check Download Fp, then click Execute button.

(9)Click Download all records to download A.C. Records.

8/2/2019 bio-tao

35/42


35

(10)Download successfully

4.5 Upload staff's name to Bio-Eagle

(1)Enter Employee Maintenance

8/2/2019 bio-tao

36/42

36

(2)Input Names, then out of this window

(3)Enter Time Recorder Communication

8/2/2019 bio-tao

37/42


37

(4) Click Connect

(5) Check Upload user info, then click Execute to upload name and

password.

8/2/2019 bio-tao

38/42

38

(6)Names have been uploaded to Machine successfully. If you need to

upload fingerprints to another m/c, please check the column of Upload

FP, then click on Execute button.

4.6 Connect PC andBio-Eagle with TCP/IP

Connect PC and Bio-Eagle with TCP/IP

1.Make sure the switch of controller is pointed at TCP/IP

2.The communication for TAP-01 is TCP/IP

Menu->OptionsComm Opt IP Addr213.10.15.124(use

fixed IP address.

Menu->OptionsCommOptEthernetYes

Menu->OptionsComm OptRS232No

Menu->OptionsComm OptRS485No

Menu->OptionsCommOptNetSpeedAuto

The download and upload procedure, please reference chapter 4.1

4.3 4.4 4.5.

8/2/2019 bio-tao

39/42


39

Note: If the controller box is reset, please restart the box by pulling off

the wire, if reset the comm. Options, please restart the Bio-Eagle.

5. System Information

Access [Menu] to Sys Info, press [OK], the following appears:

It displays user numbers, password numbers, fingerprint numbers,

manager and log numbers in the screen. You can see some

information such as the remainder log capacity in the memory; the

device capacity, the defaults date; machine number and OEMs

information are in the system.

6. Trouble shooting

1. Cleaning

Sys Info

User Cnt 206

F Cnt 173

Sys Info

Admin Cnt 0

Pwd User 37

Sys Info

Pwd User 37

Res S ace

8/2/2019 bio-tao

40/42

40

From time to time, the optical platen, the keypad and display

window require cleaning. Since working environments differ, it is not

possible to define when cleaning should be performed. Following is

guide:

Table 5-1 Cleaning Schedule

Item Cleaning Frequency

Keypad and display window Cleaning when visibly dirty and

hard to read. See cleaning the

keypad and

Display below.

Optical platen Do not over clean. The platen is

designed to work under greasy or

dirty conditions.

However, do clean if the platen is

Obstructed or people are

reporting deteriorating

Performance. See cleaning the

Optical Platen below.

2. Cleaning the Keypad and Display

To clean the keypad and display, use the same cleaning products as

for the platen, and wipe dry.

3. Cleaning the Optical Platen

Clean the optical platen as follows:

(1) If dusty or gritty, first blow on the platen to clean off any looseparticles.

Spray on a light coating of a window cleaning product or other

similar neutral detergent.

Warning: Do not use any other cleaner or the platen may become

damaged.

8/2/2019 bio-tao

41/42


41

(3) Using a non-abrasive and intone, pat dry. Be careful not to scratch

the platen. If lint particles adhere to the platen surface, below them

off when the platen is dry.

8/2/2019 bio-tao

42/42

42

User Manual

bio-tao

Documents