Bio 2SB Scanjet tank cleaning equipment 78-01 The Scanjet Bio 2SB is a new type of Rotary Spray Head (RSH) tank cleaning device. Compared with conventional static devices, the Bio 2SB is very efficient, saving water and chemicals while improving cleaning effectiveness. The Bio 2SB employs a unique fluid bearing rotary mechanism, with a service life two to three times that of traditional ball bearing rotary devices. The choice of either a clip-on (pin), weld-on or threaded connection means the Bio 2SB is always easy to install, whether building a new CIP tank cleaning system or upgrading an existing one based on ordinary static or rotary spray devices. With 360° impact coverage, self-cleaning and self-draining features, the Bio 2SB design follows EHEDG and GMP guidelines, and can be supplied with EN10204-2.1, 2.2 or 3.1 material and FDA 21CFR compliance certificates. The Bio 2SB-XXX-A clip-on and weld-on versions have attained 3A certification under sanitary standard 78-01. Surface finish roughness supplied as standard is Ra = 0.8 μm (30 μ inch); other surfaces are available upon request. The Bio 2SB can be used in conjunction with the Scanjet WASHTRAC sensor to monitor and verify its operation and performance. The Bio 2SB is the first choice for anyone looking for the most advanced Rotary Spray Head tank cleaning device available. The Scanjet Bio 2SB Rotary Spray Head can be used in a wide range of applications, including: + Mixing vessels + Blending tanks + Beverage tanks + Dairy tanks + Yeast tanks + Reactors + IBCs KEY FEATURES + Rotating spray + 360° cleaning pattern + Ideal for small tanks + Low pressure + Low use of cleaning medium
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Bio 2SBScanjet tank cleaning equipment
78-01
The Scanjet Bio 2SB is a new type of Rotary Spray Head (RSH) tank cleaning
device. Compared with conventional static devices, the Bio 2SB is very efficient,
saving water and chemicals while improving cleaning effectiveness. The Bio 2SB
employs a unique fluid bearing rotary mechanism, with a service life two to three
times that of traditional ball bearing rotary devices.
The choice of either a clip-on (pin), weld-on or threaded connection means the Bio
2SB is always easy to install, whether building a new CIP tank cleaning system or
upgrading an existing one based on ordinary static or rotary spray devices.
With 360° impact coverage, self-cleaning and self-draining features, the Bio 2SB
design follows EHEDG and GMP guidelines, and can be supplied with EN10204-2.1,
2.2 or 3.1 material and FDA 21CFR compliance certificates. The Bio 2SB-XXX-A
clip-on and weld-on versions have attained 3A certification under sanitary standard
78-01. Surface finish roughness supplied as standard is Ra = 0.8 μm (30 μ inch);
other surfaces are available upon request.
The Bio 2SB can be used in conjunction with the Scanjet WASHTRAC sensor to
monitor and verify its operation and performance.
The Bio 2SB is the first choice for anyone looking for the most advanced Rotary
Spray Head tank cleaning device available.
The Scanjet Bio 2SB Rotary Spray Head can be used in a wide range of
applications, including:
+ Mixing vessels
+ Blending tanks
+ Beverage tanks
+ Dairy tanks
+ Yeast tanks
+ Reactors
+ IBCs
KEY FEATURES
+ Rotating spray
+ 360° cleaning pattern
+ Ideal for small tanks
+ Low pressure
+ Low use of cleaning medium
1 1,5 2 2,5 3 3,5 4 4,5 5
0
0,5
1
1,5
2
2,5
3
3,5
20 30 40 50 60 700
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Flow vs. Pressure
bar
psi
m3/h USgpm
1 1,5 2 2,5 3 3,5 4 4,5 5
0
1
2
0,5
1,5
Impact cleaning
20 30 40 50 60 70
0
0,5
1
1,5
2
2,5
3
3,5
4
4,5
5
5,5
6
6,5
m ft
bar
psi
Cleaning Radius
Wetting
Date DateDrawer Surface treatment Weight
NoteDimensionMaterialGeneral Tolerances
Tolerance ISO 2768-m Gen. surface
N9
This
doc
umen
t is o
ur p
rope
rty
and
shal
l not
with
out o
urpe
rmis
sion
in w
ritin
g be
alte
red,
cop
ied,
use
d fo
r man
u-fa
ctur
ing
or c
omm
unic
ated
to a
ny p
erso
n or
com
pany
.
Drawing no. / Ritningsnr.
Format
Bio 2SB A4Scale
B2SB-XXX-A
2:1
Bio 2SB
Den
na h
andl
ing
är v
år e
gend
om o
ch få
r ej u
tan
vårt
skrif
tliga
med
giva
nde
ändr
as, k
opie
ras,
anvä
ndas
för
tillv
erkn
ing
elle
r del
ges a
nnan
per
son
elle
r �rm
a.
P01Törnedalsgatan 1, 275 21 SjöboSWEDEN
HH
Revision
16-11-24
¾" ISO Weld-on
E
No. Revision note Date Sign.Qty. Ins.
B2SB-XXX-3A
55.40 gram
SS-IS
O 2
768-
m fo
r mac
hine
d pa
rts
(3
0)-1
20=
0.3
0.5
-3=
0.1
(120
)-315
=0.
5(3
)-30=
0.2
3
15)-1
000=
0.8
Designer
* Clip-on models have approx. 0,5 m³/h higher flow rate