PART NO. FIT KITS DB-Killer BIKE YEAR NOTES scorpion-exhausts.com FITTING INSTRUCTIONS 1/2 NOTE: ENSURE SCORPION SYSTEM IS CLEAR OF MOVING PARTS AND ALL ORIGINAL FUNCTIONS WORK CORRECTLY. 1 R/H Side 300mm Serket Silencer RSC248 2 L/H Side 300mm Serket Silencer RSC249 3 R/H Side Connecting Pipe CP700 4 L/H Side Connecting Pipe CP699 5 4 x Rubber Coated Springs (Z028.10030) 6 2 x M8x60mm Cap Head Bolts (Z017.10080) 7 2 x Alloy Bolt Finishers (Z026.20068) 8 2 x 15mm Alloy Spacers (Z026.10005) 9 2 x M8x25mm Washers (Z017.10825) 10 2 x M8 Nyloc Nuts (Z017.10062) 11 2 x 43-47mm Band Clamps (Z016.10008) E-MARK SI100 e4 2361 9 ISSUE NO. 02 DATE 19/10/2018 AUTHORISED J.Harkin CHECKED SUZUKI GSX 1300 R HAYABUSA 2008 - 2017 Use standard fittings where not supplied Remove standard gasket if fitted. RSI - 112 Z039.10467 2 x SCEXDBK23 - (Type V) Box: PLOCK 2 x 2 A) Remove original exhaust from bike, taking care to keep all original components in a safe place. B) Refit Scorpion exhaust as per line diagram above. C) When fitted take bike for a short ride to ensure all functions are correct. D) When bike & exhaust are cool enough check all nuts and bolts are still secure. SCORPION RED POWER 1 2 8 9 10 9 8 5 6 7 5 3 11 4 5 7 6