706 soldering kit Cat. No. 202420 712 soldering kit Cat. No. 202350 SPECIFICATION FEATURES FEATURES <2 Ω Soldering station temperature range 200 ~ 480 ° C power supply 50 200 ~ 240V / 60Hz The tip-to-ground voltage <2 mV The resistance of the tip-to-ground Panel dimensions ( W ' D ' H) Panel dimensions ( W ' D ' H) Panel dimensions ( W ' D ' H) Panel dimensions ( W ' D ' H) Panel dimensions ( W ' D ' H) Panel dimensions ( W ' D ' H) panel Weight Equipment: Flask "hot air" (connected to the panel of the station), the soldering iron with a tip TI, the support of the soldering iron, the support flask "hot air" cord, cap: A1300, A1121, A1124 Optional nozzles (cap) supply type QFP , SOP, PLCC SOJ, BGA (see www.biall.com.pl), adapter caps for BGA (Metcal) 160 ' 200 ' 160 mm, about 160 ' 200 ' 160 mm, about 160 ' 200 ' 160 mm, about 160 ' 200 ' 160 mm, about 160 ' 200 ' 160 mm, about 3.4 kg • Two switches allow you to work separate or shared soldering station and the station "HOT AIR". • Optional attachments allow you to work with SMD type SOIC, CHIP, QFP, PLCC, BGA, etc. • The high efficiency of heat transfer to the soldering tip heater or heated air. • Temperature control in a closed loop • High power for fast heating of air temperature and achievement of stability regardless of flow rate. • Swirling air in the heating element provides improved heat transfer from the heater. • A wide range of air flow control. • The "auto sleep" automatic heater cooled to 100 ° C and turning the power off to save energy and extend the life of the heating element. • Immediate return to the set operating parameters after removing the flask from the cradle. • Status message "sleep" on the LCD. • Messages of malfunctions on the LCD. • Wide range of tips for soldering station (caves as the station ESD 236 Quick - see page 9 of catalog). • Large selection of adapters to a flask for hot air (as a cap Quick 855PG - see www.biall.com.pl • It can also be used for removing paint, melting heat, etc. disinfection. • Station settings are password protected. • Temperature control using the buttons. • A temperature sensor disposed within the tip. • Digital temperature calibration. • Temperature control in closed loop. • Electromagnetic heating element. • The "auto sleep". • Powerful brushless motor with variable. • The "shut-off" Cooling element for heating the deposition of the flask to stand. • Well insulated, yet lightweight stock. Power / voltage heater 50W / 30V Station "HOT-AIR" temperature range 100 ~ 450 ° C Power / voltage heating 580W / 30V Air flow 100 l / min max digital display LCD resolution of 1 ° C Other specifications Universal cap a "pipe" Type A1300 Ø8,4x17 Type A1121 Ø6,4x17 Ø3,0x25 SPECIFICATION <2 Ω Soldering station temperature range Operating Temperature The temperature in the sleep mode 50 ~ 500 ° C 100 ~ 500 ° C 50 ~ 250 ° C Station "HOT-AIR" Air flow 120l / min max Power consumption Power consumption 90W Sleep mode time 0 ~ 250 min temperature stabilization temperature stabilization ± 2 ° C ± 2 ° C Potential tip to ground 1000W tel./fax: +48 58 322 11 91 E-mail: [email protected] http://www.biall.com.pl Bialla Sp. z oo ul. Barniewicka 54c PL 80-299 GDANSK