The Rowley Range by BGID The very best of side hinged garage door systems
Mar 23, 2016
Options•Doors are normally supplied with BGID’s own rebated
section steel frame, but can be supplied ready to fit within a timber sub-frame (not by BGID)
•Flashing to cover exposed brickwork or unsightly gaps can be supplied manufactured from galvanized steel, and powder coat paint finished to match the frame
•Access doors, whether separate, or part of the garage door, can be right hand or left hand, or in some cases centre opening
•Mortice Locks with lever handles; mortice dead locks, extra security bolts, letter plates, even cat flaps are available
•Choice of leading styles where windows are incorporated•Choice of powder coat paint finish•Doors are normally arranged to open out, but opening
into the garage is an option•Door and frame units are normally fitted between
brickwork, but can easily be fitted to the outside face to maximise drive through width and height.
Size Range ChartNo standard sizes - all doors are made to measure
TwoThirds&OneThirdsplit:BrickworkOpening
Opening Min Max
Width 5’ 11¼” (1810) 9’ 8½” (2960)
Height 6’ 1¾” (1873) 7’ 1 ” (2170)
Half&HalfSplit:BrickworkOpening
Opening Min Max
Width 7’ 9¾” (2380) 11’ 2½” (3416)
Height 6’ 1¾” (1873) 7’ 1 ” (2170)
The information above is based on using BGID’s own steel frame - where a timber frame is used (not by BGID) these dimensions may alter.
Panel Configurations Opening Details
If you cannot see the panel configuration you require, or for advice on on the best application for wider or taller openings, contact BGID.
After all, flexibility is our strength
The Rowley Range by BGIDThe very best of side hinged garage door systems
The Rowley Range by BGID The very best of side hinged garage door systems
The Rowley Range by
Why Choose BGID?•All door and frame sets fully powder coat paint finished inside
and out •All door frame sets are made to measure•Extensive choice of colours and finishes•Full set of quality hardware and door stays included as
standard•Unique manufacturing process allows all doors to have an
inner skin as standard – at no extra cost.•Bi-fold action to any two panel leaf now offered – at no
extra cost•Fixings for the frame to timber or brickwork are included •All galvanised steel construction•Even if what you want is not shown here, we can probably
make it – just ask – flexibility is our strengthBirmingham Garage & Industrial Doors Ltd
Units 3, 10 & 12, Griffin Industrial Estate, Penncricket Lane, Rowley Regis, West Midlands, B65 0SN.
tel: 01215598666 fax: 0121 561 5373
[email protected] www.bgid.co.uk
Sprung action, chain operated, top bolt
flexibility is our strength
Horizontal Rib
DoorStyles
TheRowleyRange,steelsidehingeddoors,nowbenefitfromasignificantlyimprovedformofconstruction.ThisallowsBGIDtoprovidethesenewdoorswithaninnerskin,whichsubstantiallyimprovesaestheticvalues,addstopanelintegritywithoutweightpenaltyandwithoutapricedisadvantageoverourearlierdoors.
Inner Door Skin now as StandardThe RowleyRange, steel side hinged garage doors, are normally fitted within BGID’s own unique cold rolled, rebated section, galvanised steel frame, incorporating as standard, a zinc plated and powder coated finished fullheightcontinuoushinge.
Where the doors are to be fitted into a timber frame, BGID supply 3x 100mm (4”) galvanized steel butt hinges – these are also powder coat paint finished to match the door panel colour.
Door Openings The first opening, or access door, is supplied as standard with a Rim Nightlatch and 2 x keys with brass face and convenient matching brass finger pull. The closing edge of this door and the adjacent panel are both provided with cloaking strips for enhanced security.
The slave, or second opening leaf, is offered, as standard, with the option of either Bi-Fold action or Fixed. It is then fitted with the appropriate number of 150mm sprungaction,chainoperated,topbolts and 150mm footoperated,bottombolts providing security and convenience.
All sets of RowleyRange garage doors are supplied, as standard, with a pair of overheaddoorstays to conveniently and securely hold the doors open at 90o.
Powder Coating All RowleyRange, steel side hinged garage doors and frames are supplied fully powder coat paint finished. The whole process taking place at BGID’s own in-house continuous process powder coat paint plant.
White is our most popular colour, but BGID offer a further extensive rang of standard colours at no additional cost. Even a white frame with a coloured door is no problem to BGID and again does not incur additional charge.
BGID normally supply the powder coat paint in a textured finish, but matt and semi-gloss are available in most colours, but check before ordering.
Not for BGID, the lightweight
box section frame favoured by other
manufacturers - BGID use a purpose made
galvanized steel, industrial security quality, 2mm thick
cold rolled rebated section, with mitred and internally
welded corners to provide an immensely robust frame.
The frame is pre-drilled, and includes, fixings for both timber
and brickwork and is ready to accept BGID’s unique full height continuous
hinge system.
Rochester ArundelStirlingYork
As individual as you are! Every BGIDRowleyRange, side hinged garage door is made to measure – please see our OpeningDetailsinformation for the normal overall size range – however, here at BGID we believe flexibility is our strength we can, and often do, work outside the limitations shown.
BGID have the unique ability to manufacture, supply and install if required, either directly or through a network of approved specialist garage door installers – RowleyRange, side hinged doors, purpose made to suit individual customer requirements….
Vertical Rib
Foot operated bottom bolt
Ove
rhea
d do
or st
ays
Continuous hinge
Examples of inner door skin Side Hinged Steel Garage Doors
Extra height doors to accommodate tall vehicles or caravans – indeed extra width doors where required can be arranged – separate, but matching access doors – doors with glazing with BGID’s unique JB cassette Window System – fixed as well as opening panels – non standard powder coat paint colours…
Fortheverybest–andforcompleteflexibility,whateveryourgaragedoorrequirements–giveBGIDacall,thesidehingedgaragedoorspecialists.
Fitted
with
JB W
indo
w C
asse
tte
Syste
m
Fitte
d w
ith a
cat
fl ap
- an
unu
sual
extra
A double width opening
The Rowley Range by BGID The very best of side hinged garage door systemsCall Today 0121 559 8666 www.bgid.co.uk
Sprung action, chain operated, top bolt
flexibility is our strength
Horizontal Rib
DoorStyles
TheRowleyRange,steelsidehingeddoors,nowbenefitfromasignificantlyimprovedformofconstruction.ThisallowsBGIDtoprovidethesenewdoorswithaninnerskin,whichsubstantiallyimprovesaestheticvalues,addstopanelintegritywithoutweightpenaltyandwithoutapricedisadvantageoverourearlierdoors.
Inner Door Skin now as StandardThe RowleyRange, steel side hinged garage doors, are normally fitted within BGID’s own unique cold rolled, rebated section, galvanised steel frame, incorporating as standard, a zinc plated and powder coated finished fullheightcontinuoushinge.
Where the doors are to be fitted into a timber frame, BGID supply 3x 100mm (4”) galvanized steel butt hinges – these are also powder coat paint finished to match the door panel colour.
Door Openings The first opening, or access door, is supplied as standard with a Rim Nightlatch and 2 x keys with brass face and convenient matching brass finger pull. The closing edge of this door and the adjacent panel are both provided with cloaking strips for enhanced security.
The slave, or second opening leaf, is offered, as standard, with the option of either Bi-Fold action or Fixed. It is then fitted with the appropriate number of 150mm sprungaction,chainoperated,topbolts and 150mm footoperated,bottombolts providing security and convenience.
All sets of RowleyRange garage doors are supplied, as standard, with a pair of overheaddoorstays to conveniently and securely hold the doors open at 90o.
Powder Coating All RowleyRange, steel side hinged garage doors and frames are supplied fully powder coat paint finished. The whole process taking place at BGID’s own in-house continuous process powder coat paint plant.
White is our most popular colour, but BGID offer a further extensive rang of standard colours at no additional cost. Even a white frame with a coloured door is no problem to BGID and again does not incur additional charge.
BGID normally supply the powder coat paint in a textured finish, but matt and semi-gloss are available in most colours, but check before ordering.
Not for BGID, the lightweight
box section frame favoured by other
manufacturers - BGID use a purpose made
galvanized steel, industrial security quality, 2mm thick
cold rolled rebated section, with mitred and internally
welded corners to provide an immensely robust frame.
The frame is pre-drilled, and includes, fixings for both timber
and brickwork and is ready to accept BGID’s unique full height continuous
hinge system.
Rochester ArundelStirlingYork
As individual as you are! Every BGIDRowleyRange, side hinged garage door is made to measure – please see our OpeningDetailsinformation for the normal overall size range – however, here at BGID we believe flexibility is our strength we can, and often do, work outside the limitations shown.
BGID have the unique ability to manufacture, supply and install if required, either directly or through a network of approved specialist garage door installers – RowleyRange, side hinged doors, purpose made to suit individual customer requirements….
Vertical Rib
Foot operated bottom bolt
Ove
rhea
d do
or st
ays
Continuous hinge
Examples of inner door skin
Side Hinged Steel Garage Doors
Extra height doors to accommodate tall vehicles or caravans – indeed extra width doors where required can be arranged – separate, but matching access doors – doors with glazing with BGID’s unique JB cassette Window System – fixed as well as opening panels – non standard powder coat paint colours…
Fortheverybest–andforcompleteflexibility,whateveryourgaragedoorrequirements–giveBGIDacall,thesidehingedgaragedoorspecialists.
Fitted
with
JB W
indo
w C
asse
tte
Syste
m
Fitte
d w
ith a
cat
fl ap
- an
unu
sual
extra
A double width opening
The Rowley Range by BGID The very best of side hinged garage door systemsCall Today 0121 559 8666 www.bgid.co.uk
Sprung action, chain operated, top bolt
flexibility is our strength
Horizontal Rib
DoorStyles
TheRowleyRange,steelsidehingeddoors,nowbenefitfromasignificantlyimprovedformofconstruction.ThisallowsBGIDtoprovidethesenewdoorswithaninnerskin,whichsubstantiallyimprovesaestheticvalues,addstopanelintegritywithoutweightpenaltyandwithoutapricedisadvantageoverourearlierdoors.
Inner Door Skin now as StandardThe RowleyRange, steel side hinged garage doors, are normally fitted within BGID’s own unique cold rolled, rebated section, galvanised steel frame, incorporating as standard, a zinc plated and powder coated finished fullheightcontinuoushinge.
Where the doors are to be fitted into a timber frame, BGID supply 3x 100mm (4”) galvanized steel butt hinges – these are also powder coat paint finished to match the door panel colour.
Door Openings The first opening, or access door, is supplied as standard with a Rim Nightlatch and 2 x keys with brass face and convenient matching brass finger pull. The closing edge of this door and the adjacent panel are both provided with cloaking strips for enhanced security.
The slave, or second opening leaf, is offered, as standard, with the option of either Bi-Fold action or Fixed. It is then fitted with the appropriate number of 150mm sprungaction,chainoperated,topbolts and 150mm footoperated,bottombolts providing security and convenience.
All sets of RowleyRange garage doors are supplied, as standard, with a pair of overheaddoorstays to conveniently and securely hold the doors open at 90o.
Powder Coating All RowleyRange, steel side hinged garage doors and frames are supplied fully powder coat paint finished. The whole process taking place at BGID’s own in-house continuous process powder coat paint plant.
White is our most popular colour, but BGID offer a further extensive rang of standard colours at no additional cost. Even a white frame with a coloured door is no problem to BGID and again does not incur additional charge.
BGID normally supply the powder coat paint in a textured finish, but matt and semi-gloss are available in most colours, but check before ordering.
Not for BGID, the lightweight
box section frame favoured by other
manufacturers - BGID use a purpose made
galvanized steel, industrial security quality, 2mm thick
cold rolled rebated section, with mitred and internally
welded corners to provide an immensely robust frame.
The frame is pre-drilled, and includes, fixings for both timber
and brickwork and is ready to accept BGID’s unique full height continuous
hinge system.
Rochester ArundelStirlingYork
As individual as you are! Every BGIDRowleyRange, side hinged garage door is made to measure – please see our OpeningDetailsinformation for the normal overall size range – however, here at BGID we believe flexibility is our strength we can, and often do, work outside the limitations shown.
BGID have the unique ability to manufacture, supply and install if required, either directly or through a network of approved specialist garage door installers – RowleyRange, side hinged doors, purpose made to suit individual customer requirements….
Vertical Rib
Foot operated bottom bolt
Ove
rhea
d do
or st
ays
Continuous hinge
Examples of inner door skin
Side Hinged Steel Garage Doors
Extra height doors to accommodate tall vehicles or caravans – indeed extra width doors where required can be arranged – separate, but matching access doors – doors with glazing with BGID’s unique JB cassette Window System – fixed as well as opening panels – non standard powder coat paint colours…
Fortheverybest–andforcompleteflexibility,whateveryourgaragedoorrequirements–giveBGIDacall,thesidehingedgaragedoorspecialists.
Fitted
with
JB W
indo
w C
asse
tte
Syste
m
Fitte
d w
ith a
cat
fl ap
- an
unu
sual
extra
A double width openingThe Rowley Range by BGID The very best of side hinged garage door systemsCall Today 0121 559 8666 www.bgid.co.uk
Options•Doors are normally supplied with BGID’s own rebated
section steel frame, but can be supplied ready to fit within a timber sub-frame (not by BGID)
•Flashing to cover exposed brickwork or unsightly gaps can be supplied manufactured from galvanized steel, and powder coat paint finished to match the frame
•Access doors, whether separate, or part of the garage door, can be right hand or left hand, or in some cases centre opening
•Mortice Locks with lever handles; mortice dead locks, extra security bolts, letter plates, even cat flaps are available
•Choice of leading styles where windows are incorporated•Choice of powder coat paint finish•Doors are normally arranged to open out, but opening
into the garage is an option•Door and frame units are normally fitted between
brickwork, but can easily be fitted to the outside face to maximise drive through width and height.
Size Range ChartNo standard sizes - all doors are made to measure
TwoThirds&OneThirdsplit:BrickworkOpening
Opening Min Max
Width 5’ 11¼” (1810) 9’ 8½” (2960)
Height 6’ 1¾” (1873) 7’ 1 ” (2170)
Half&HalfSplit:BrickworkOpening
Opening Min Max
Width 7’ 9¾” (2380) 11’ 2½” (3416)
Height 6’ 1¾” (1873) 7’ 1 ” (2170)
The information above is based on using BGID’s own steel frame - where a timber frame is used (not by BGID) these dimensions may alter.
Panel Configurations Opening Details
If you cannot see the panel configuration you require, or for advice on on the best application for wider or taller openings, contact BGID.
After all, flexibility is our strength
The Rowley Range by BGIDThe very best of side hinged garage door systems
The Rowley Range by BGID The very best of side hinged garage door systems
The Rowley Range by
Why Choose BGID?•All door and frame sets fully powder coat paint finished inside
and out •All door frame sets are made to measure•Extensive choice of colours and finishes•Full set of quality hardware and door stays included as
standard•Unique manufacturing process allows all doors to have an
inner skin as standard – at no extra cost.•Bi-fold action to any two panel leaf now offered – at no
extra cost•Fixings for the frame to timber or brickwork are included •All galvanised steel construction•Even if what you want is not shown here, we can probably
make it – just ask – flexibility is our strengthBirmingham Garage & Industrial Doors Ltd
Units 3, 10 & 12, Griffin Industrial Estate, Penncricket Lane, Rowley Regis, West Midlands, B65 0SN.
tel: 01215598666 fax: 0121 561 5373
[email protected] www.bgid.co.uk
Options•Doors are normally supplied with BGID’s own rebated
section steel frame, but can be supplied ready to fit within a timber sub-frame (not by BGID)
•Flashing to cover exposed brickwork or unsightly gaps can be supplied manufactured from galvanized steel, and powder coat paint finished to match the frame
•Access doors, whether separate, or part of the garage door, can be right hand or left hand, or in some cases centre opening
•Mortice Locks with lever handles; mortice dead locks, extra security bolts, letter plates, even cat flaps are available
•Choice of leading styles where windows are incorporated•Choice of powder coat paint finish•Doors are normally arranged to open out, but opening
into the garage is an option•Door and frame units are normally fitted between
brickwork, but can easily be fitted to the outside face to maximise drive through width and height.
Size Range ChartNo standard sizes - all doors are made to measure
TwoThirds&OneThirdsplit:BrickworkOpening
Opening Min Max
Width 5’ 11¼” (1810) 9’ 8½” (2960)
Height 6’ 1¾” (1873) 7’ 1 ” (2170)
Half&HalfSplit:BrickworkOpening
Opening Min Max
Width 7’ 9¾” (2380) 11’ 2½” (3416)
Height 6’ 1¾” (1873) 7’ 1 ” (2170)
The information above is based on using BGID’s own steel frame - where a timber frame is used (not by BGID) these dimensions may alter.
Panel Configurations Opening Details
If you cannot see the panel configuration you require, or for advice on on the best application for wider or taller openings, contact BGID.
After all, flexibility is our strength
The Rowley Range by BGIDThe very best of side hinged garage door systems
The Rowley Range by BGID The very best of side hinged garage door systems
The Rowley Range by
Why Choose BGID?•All door and frame sets fully powder coat paint finished inside
and out •All door frame sets are made to measure•Extensive choice of colours and finishes•Full set of quality hardware and door stays included as
standard•Unique manufacturing process allows all doors to have an
inner skin as standard – at no extra cost.•Bi-fold action to any two panel leaf now offered – at no
extra cost•Fixings for the frame to timber or brickwork are included •All galvanised steel construction•Even if what you want is not shown here, we can probably
make it – just ask – flexibility is our strengthBirmingham Garage & Industrial Doors Ltd
Units 3, 10 & 12, Griffin Industrial Estate, Penncricket Lane, Rowley Regis, West Midlands, B65 0SN.
tel: 01215598666 fax: 0121 561 5373
[email protected] www.bgid.co.uk