Drawworks_0409 Bentec Gear Driven Drawworks are state-of-the-art for modern drilling systems and suit for onhore or offshore rigs. Their light weight and small dimen- sions make them ideal for frequent rig moves or limited offshore crane capacity. The electromagnetic brake is aircooled. Gear switching and brake operation is maintained by compressed air. Bentec Drawworks just need air and electricity. There’s no cooling water that could freeze, no hydraulic systems that could leak. Bentec Drawworks are designed to operate under extreme environmental conditions. No additional protection measures are required. A standard feature is the remote control via joy- stick. The Bentec ACS provides security against any collision with the crown block, the rig floor or other obstacles in the rig. The Bentec Feed-Off- System enables automated drilling, emergency hoisting and mast erection with just the emergency generator. Bentec supplies its drawworks along with the SCR or VFD drives and the driller’s control cabin. No interface problems will occur during the commis- sion phase because Bentec acts as a “System Supplier”. BENTEC GEAR DRIVEN DRAWWORKS Rig Building Mechanics Electrics Repair Consulting Quality Projects Engineering
2
Embed
BENTEC GEAR DRIVEN DRAWWORKS Drawworks_0409.pdf · 2010. 8. 29. · Drawworks_0409 Bentec Gear Driven Drawworks are state-of-the-art for modern drilling systems and suit for onhore
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Draw
wor
ks_0
409
Bentec Gear Driven Drawworks are state-of-the-artfor modern drilling systems and suit for onhore oroffshore rigs. Their light weight and small dimen-sions make them ideal for frequent rig moves orlimited offshore crane capacity.
The electromagnetic brake is aircooled. Gearswitching and brake operation is maintained bycompressed air. Bentec Drawworks just need airand electricity. There’s no cooling water that couldfreeze, no hydraulic systems that could leak.
Bentec Drawworks are designed to operate underextreme environmental conditions. No additionalprotection measures are required.
A standard feature is the remote control via joy-stick. The Bentec ACS provides security againstany collision with the crown block, the rig floor orother obstacles in the rig. The Bentec Feed-Off-System enables automated drilling, emergencyhoisting and mast erection with just the emergencygenerator.
Bentec supplies its drawworks along with the SCRor VFD drives and the driller’s control cabin. Nointerface problems will occur during the commis-sion phase because Bentec acts as a “SystemSupplier”.
BENTEC GEAR DRIVEN DRAWWORKS
Rig Building Mechanics Electrics Repair Consulting Quality Projects Engineering
www.bentec.comBentec GmbH Dri l l ing & Oi l f ield SystemsDeilmannstrasse 148455 Bad Bentheim • Germany