Matchmaker ® Series Belts Ensure all belts of same size and type will measure within ARPM matching limits Nominal How to Obtain Inside or Outside Length Section Top (in.) Width (in.) Up to 210 in. Add or Subtract Over 210 in. Add or Subtract A, AX, 4L 1/2 .500 2.1 in. to/from Part # 2.1 in. to/from Part # B, BX, 5L 21/32 .656 2.9 in. to/from Part # 1.4 in. to/from Part # C, CX 7/8 .875 4.2 in. to/from Part # 2.2 in. to/from Part # D, DX 1¼ 1.250 5.2 in. to/from Part # 2.7 in. to/from Part # E 1½ 1.500 7.0 in. to/from Part # 3.5 in. to/from Part # Belt Length Conversion ^ ^Check belt type for measurement method 8mm 8mm 14.6mm 14mm 0.31" 0.38" 0.62" 0.53" 0.91" 1.00" 3V / 3VX 5V / 5VX 8V 0.88" 0.53" 1.25" 0.75" 0.66" 0.41" 0.50" 0.31" C D A B Manufactured in cut edged molded cog and envelope cut cog construction in 3V and 5V profiles depending on length and drive requirements; envelope non-cogged on all 8V’s. 0.14" 0.092" 0.165" 0.140" 0.51" 0.370" 0.38" 0.185" 0.12" 0.063" J Static conductive* K* H L M Cut-edge=non-static conductive Belts and Sprockets Drive Solutions that Drive Performance › B – 0.66 inch top width, classical profile › X – Premium cogged construction › 75 – Approximate 75 inch inside length › 5V – 0.62 inch top width, narrow profile › 1400 – 140.0 inch standard effective length (envelope uncogged construction shown) › 180 – 18.0 inch nominal outside length › J – J section Poly V › 4 – 4 ribs *Check with Continental ContiTech for specific static conductivity details. › B – 0.66 inch top width, classical profile › Available roller lengths 250 feet and 500 feet › D – Section available only in 250 foot roll lengths › B – 0.66 inch top width, classical profile › 75 – Approximate 75 inch inside length HY-T ® Plus Available in E Sections ELATECH ® § Polyurethane Belts Dual Positive Drive HY-T ® Wedge Poly-V ® Open End Matchmaker® Torque-Flex ® Matchmaker® Matchmaker® ® †Various product styles include ELATECH® M (Open End), ELATECH® V (Jointed or Welded), iSYNC (cut to width sleeves) and ELA-flex SD™ (Truly Endless). §ELATECH is a registered trademark of Elatech S.r.l. › B – Blue = 14mm pitch › 35mm width › 1750 – 1750mm belt length › D – Dual sided › 225 – 22.5 inch belt length › L – L-pitch, trapezoidal tooth profile › 050 – 0.50 inches wide › 8GTR – 8mm pitch › 640 – 640mm belt length › 12 – 12mm wide › Metric T, AT and ATL › XL, L, H and XH › HTD › STD › Self-tracking TK and ATK › Flat belt 35mm 70mm 14mm 8.6mm 16mm 8mm 5.3mm 32mm 8mm 5.3mm 14mm Yellow Blue Green White Orange Red Purple 8.6mm 52.5mm 14mm 8.6mm 105mm 14mm 8.6mm 64mm 8mm 5.3mm All belt sizes static conductive* 0.50" 0.31" 0.66" 0.41" 1.25" 0.75" 0.88" 0.53" A C B D All belt sizes static conductive* 0.31" 0.50" 0.66" 0.41" 0.53" 0.88" (Side View) Cut edge, molded cog on all AX sizes, BX up to 136 inches, CX up to 136 inches. All others are envelope cut cog construction. All belt sizes static conductive* All belt sizes static conductive* All belt sizes static conductive* 14mm 8mm 5.8mm 9.8mm All belt sizes static conductive* Sample Size: B1750 14mm 8mm Sprockets ® › GTR – Falcon Pd® sprocket › 22G – 22 grooves/teeth › 8M – 8mm pitch length › 12 – Matches 12mm belt Sample Size: GTR-22G-8M-12 Sample Size: D225L050 Sample Size: B75 Sample Size: BX75 › 5/ – 5 rib joined construction › 8V – 1.00 inch top width, narrow profile rib › 1900 – 190.0 inch standard effective length › Single envelope ply on 5Vs, 2 envelope plies on 8Vs (cut edge, molded cog construction shown) HY-T ® Wedge Torque Team ® Matchmaker® 5V, 8V 3VX, 5VX (Side View) 3VX, 5VX Manufactured in 3V, 5V and 8V cross sections with envelope construction in lengths over 136 inches and cut edge cogged, construction in lengths 136 inches and under. Cogged belts are designated with 3VX and 5VX. All belt sizes static conductive* Sample Size: 5/8V1900 › 3V – 0.38 inches top width, narrow profile › 950 – 95.0 inches nominal outside length (envelope uncogged construction shown) Matchmaker® ® WEDGE Manufactured in 3V, 5V and 8V cross sections with a unique dual envelope non-cogged construction. 0.31" 0.38" 0.62" 0.53" 0.91" 1.00" 3VT 5VT 8VT All belt sizes static conductive* Sample Size: 3V950 Sample Size: 8GTR-640-12 8mm 8mm 14.6mm 14mm Dual Hi-Performance ® › D – Dual sided › 1040 – 1040mm belt length › 8M – 8mm pitch round tooth profile › 20 – 20mm wide Sample Size: D1040 8M 20 Sample Size: 5V1400 › 3/ = 3 rib joined construction › B – 0.66 inch top width, classical profile rib › X – Premium cogged construction › 112 – Approximate 112 inches inside length (envelope uncogged construction shown) HY-T ® Torque Team ® Matchmaker® (Side View) Manufactured in standard classical BX and CX cross sections with cut edge, cogged construction in lengths 136 inches and under. Manufactured in standard classical B, C and D cross sections with envelope construction in lengths over 136 inches. All belt sizes static conductive* Sample Size: 3/BX112 › 5/ – 5 rib joined construction › 5V – 0.62 inch top width, narrow profile rib › L – Laminated construction › 800 – 80.0 inch standard effective length Torque Team ® (Laminated) Matchmaker® Sample Size: 5/5VL800 10mm 8mm 13mm 10mm 22mm 18mm 17mm 14mm XPZ XPB/SPB XPA/SPA XPC/SPC Raw edge, molded cog on all PZ sizes, PA up to 3350, PB up to 3650, PC up to 3750 › X – Premium cogged construction › PA – Metric A profile › 0707 – 707mm datum length › XP indicates REMC construction › SP indicates envelope construction Metric Matchmaker® Sample Size: XPA0707 16mm 8mm 5.3mm 35mm Yellow White Blue Orange Green Red M L 14mm 8.6mm 52.5mm 14mm 8.6mm 32mm 8mm 5.3mm 50mm 8mm 5.3mm 105mm 14mm 8.6mm 70mm 14mm 8.6mm 25mm 8mm 5.3mm Acculinear ® › R – 14mm pitch, 105mm width › PU – Polyurethane steel cord › STD – Standard construction Sample Size: R14PU105STD PITCHES† › 5/ – 5 ribbed joined construction › 5V – 0.62 inch top width, narrow profile rib › F – Torque Team Plus® with aramid tensile member › 1900 – 190.0 inch standard effective length › Single envelope ply on 5Vs, 2 envelope plies on 8Vs Torque Team Plus ® 5VF/8VF All belt sizes static conductive* Sample Size: 5/8VF1900 › B – 0.66 inch top width, classical profile › 47 – Approximate 47 inch inside length › F – Aramid tensile member › 85500 – Lawn and garden equivalent part number Aramid Classical POWER 0.31" 0.50" 0.66" 0.41" 0.53" 0.88" A B C All belt sizes static conductive* Sample Size: B47F 85500 Sample Size: 180J4 0.50" 0.31" 0.66" 0.38" 0.38" 0.22" 0.25" 0.16" 4L 5L 2L 3L › 4L – 0.50 inch top width › 560 – 56.0 inch nominal outside length (Cut edge melted cog construction shown) FHP Sample Size: 4L560 8mm 17mm 33mm 37mm 54.5mm 65mm 8mm 14mm 14mm 14mm 14mm 8mm 107mm 72mm Yellow Blue Green White Orange Red Purple Sprockets › Y – Matches Yellow belts › 28 – Number of grooves › S – Sprocket › SH – Hub to match SH bushing Sample Size: Y-28S-SH 2.3mm 3mm 3.6mm 5mm 5.7mm 8mm 20mm 13.8mm 14mm 10.7mm Positive Drive ® Available in 13 inch sleeve Super Torque ® › 100 – 10.0 inch belt length › XL – Pitch, trapezoidal tooth profile › 025 – 0.25 inch wide › 800 – 800mm belt length › 8M – 8mm pitch, round tooth profile › 50 – 50mm wide › 100 – 10mm width › S – Super Torque Positive Drive® belt › 4.5M – 4.5mm pitch, modified round tooth profile › 175 – 175mm belt length 0.080" 0.045" MXL XL L H XH* XXH* 0.200" 0.09" 0.875" 0.44" 0.500" 0.16" 1.250" 0.62" 0.375" 0.14" Static conductive* Static conductive* 1.9mm 3mm 4.5mm 5mm 14mm 8mm 2.8mm 3.4mm 10.2mm 5.3mm Static conductive* Sample Size: 100XL025 ® BLACKHAWK › 800 – 800mm belt length › 8M – 8mm pitch, universal tooth profile › 8H – Blackhawk Pd® › 35 – 35mm wide 14mm 8mm 5.7mm 10.7mm All belt sizes static conductive* Sample Size: 800 8M BH 35 ® HAWK Sample Size: 800 8M 50 Sample Size: 100S4.5M175 Cut edge construction › 32 – 32/16 inch top width › 26 – Angle of sheave groove › V – Variable speed profile with aramid tensile member › 585 – 58.5 pitch length Variable Speed Sample Size: 3226V585 Sample Size: B OPEN END › BB – B section double, classical profile › 0.66 inch center width › 75 – Approximate 75 inch inside length Hex 0.50" 0.41" 0.66" 0.53" 0.88" 0.66" 0.88" 0.86" CC CCP AA BB All belt sizes static conductive* Sample Size: BB75 Commonly referred to as a “chip and saw” belt 5VL All belt sizes static conductive* *Drive conditions and service variables in combination with time in operation can result in loss of static conductivity. It is recommended that a conductivity check be added to drive preventative maintenance programs where belt static conductivity is a requirement. For more information on static conductivity, visit us at www.contitech.us. Some sizes and belt types are not to scale. Illustrations are representative of the product group, and may not represent all products and variations of the group. The content of this publication is provided for information only and without responsibility. ContiTech AG’s obligations and responsibilities regarding its products are governed solely by the agreements under which they are sold. Unless otherwise agreed in writing, the information contained herein does not become part of these agreements. This publication does not contain any guarantee or agreed quality of ContiTech AG’s products or any warranty of merchantability, fitness for a particular purpose and non-infringement. ContiTech AG may make changes in the products or services described at any time without notice. This publication is provided on an “as is” basis. To the extent permitted by law, ContiTech AG makes no warranty, express or implied, and assumes no liability in connection with the use of the information contained in this publication. ContiTech AG is not liable for any direct, indirect, incidental, consequential or punitive damages arising out of the use of this publication. Information contained herein is not intended to announce product availability anywhere in the world. © 2014 ContiTech AG. All rights reserved. Continental ContiTech also offers a wide range of bushings, V-belt sheaves, synchronous belt sprockets, flat belt pulleys, flywheels and other metal power transmission products. 20781848