• Oversize-Orifice Cylinder assures minimum pressure drop • Full Length Straightening Vanes assure uniform flow pattern for pump inlet • Easily Removable End Cap with reusable O-ring • Pressure Gauge Tappings permit checking of system conditions • Fine Mesh Throwaway Start-Up Strainer assures cleaner, more trouble free system • Plug/Blow Down Connection permits routine maintenance • NPT, Flanged or Grooved End Connections guarantee the right suction diffuser selection B-820D Suction Diffuser Centrifugal Pump Accessories
B&G Suction Diffusers operation, detaisls and dimmensions. Used to replace short elbows in piping and comply withHydraulic Instute Standards fro pump suction piping requiremants.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
• Oversize-Orifice Cylinder assuresminimum pressure drop
• Full Length Straightening Vanes assureuniform flow pattern for pump inlet
• Easily Removable End Cap with reusableO-ring
• Pressure Gauge Tappings permitchecking of system conditions
• Fine Mesh Throwaway Start-Up Strainerassures cleaner, more trouble freesystem
• Plug/Blow Down Connection permitsroutine maintenance
• NPT, Flanged or Grooved EndConnections guarantee the right suctiondiffuser selection
B-820D
Suction DiffuserCentrifugal Pump Accessories
CENTRIFUGAL PUMP PROTECTION
• DIFFUSER — Provides ideal flow conditions for the pumpproviding NPSH requirements are met. Diffuser orificecylinder serves as pump strainer with much more freearea than conventional strainers.
• START-UP STRAINER — A necessity for hydronic systemsand standard for suction diffusers for closed anddomestic water systems. Remove it later without losingthe protection of the larger perforations in the orificecylinder.
• FIELD SERVICEABLE — All internal parts are easilyreplaced including the full length straightening vanes.
• SAVES TIME — No intermediate piping. Fewer joints to make.
• SAVES SPACE — Eliminates long pipe entrance,conventional strainer, pipe saddle, and floor flange.
• SAVES MONEY — Diffuser, strainer … all in one piece.Fewer pipe joints. Faster to install.
• ELIMINATES TROUBLE — Good flow conditions promotetrouble-free operation.
• ANGLE BODY — Provides an elbow which facilitates aclose transition between system return piping and thesystem pump suction. Some NPT and flanged modelsperform as reducing elbows.
Bell & Gossett Suction Diffusers Offer These Advantages