This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Light or speed control mechanisms of light and fan.
2. RANGE
Colours- front: white (molded plastic)- white RAL number: T084- rear: grey (molded plastic)
3. PREPARATION
3.1 General preparation
3. PREPARATION (continued)
3.2 Preparation for 617 032:
Preparation with 1G box:
Preparation with 2G box:
Designation Cat. No. Weight
(g)Characteristics
600 W (230 V)dimmer
617 030 90.440-600 W - 230 V~50 Hz
1000 W (230 V)500 W (127 V) dimmer
617 031 13660-1000 W - 230 v~60-500 W - 127 V~50/60 Hz
1000 W (230 V)750 W (127 V) dimmer(2 gang)
617 032 17260-1500 W - 230 v~60-750 W - 127 V~50/60 Hz
Fan control 250 VA 617 033 97.2250 VA230 V~50 Hz
�
�
- flushing mounting box
- surface mounting box
�
�
- flushing mounting box
- surface mounting box
�
�
- flushing mounting box
- surface mounting box
617 030/033 617 031617 032
BelankoTM
Dimmer
Cat. No(s).: 617 030/031/032/033
Technical data sheet: F01049EN/01 Updated: 31/08/2011 Created: 13/01/2010
2/3CONTENTS
4. OVERALL DIMENSIONS
Profile size: 86 x 86 mmDistance of installation hole: 60.3 mm Cat. No.s: 617 030/033
Profile size: 146 x 86 mmDistance of installation hole: 120.6 mm Cat. No.s: 617 031
Profile size: 146 x 86 mmDistance of installation hole: 60.3 mm or 120.6 mm Cat. No.s: 617 032
5. CONNECTION
5.1 TerminalsTerminal capacity: 4 x 1 mm2
4 x 1.5 mm2
2 x 2.5 mm2
1 x 4 mm2
Recommended screwdriver size: 4 mm flat bladeRecommended stripping length: 8 mm
5616.5
10 29.5
86
17.6
86
86
86
22.2 10 28.1
25
53.1
86
22.2
10 28.1
25
53.1
14
6
5. CONNECTION (continued)
5.2 Circuit diagrams
617 031/033:1 way:
2 way:
With compensator:
There is a rated voltage converting switch on the upper right of base and the factory setting is indicating "230 V". When the rated voltage is 127 V, push the switch on the right where it is indicated "127 V".
617 030:
617 033:
Cat. No(s).: 617 030/031/032/033
Technical data sheet: F01049EN/01 Updated: 31/08/2011 Created: 13/01/2010
3/3
BelankoTM
Dimmer
CONTENTS
6. OPERATION
Switch mechanism (handing force 8N)
7. TECHNICAL CHARACTERISTICS
7.1 Material characteristicsRocker: PolycarbonateFrame: PolycarbonateBase: PolypropyleneSelf-extinguishing: 650° C / 30 s
7.2 Climatic characteristicsStorage temperature: - 10° C to + 70° COperating temperatures: - 5° C to + 50° C
7.3 Mechanical characteristicsImpact test: IK04Protection against liquids: IP40
7.4 Electrical characteristics
7.4.1 - 617 030/031/032:
(*) Use only transformers which are intended for use with an electronic switch.
N.B.: These values to be reduced by 20% per temperature band of 10° C above 25° C.