Before Networ k conn e ctor cable After Network connector cable Cable supplied with boxed phone
Dec 14, 2015
Before
Network connector
cable
After
Network co
nnector
cable
Cable supplied with
boxed phone
1. Pick up the phone handset and dial “cbts” (2287)….2. When prompted, press 1 for “English”3. When prompted, dial your phone number as follows: 1 + your area code + your 7-digit state phone number4. The system will ask you to re-enter the number5. The phone will reboot and your name should come up…
Problems registering the phone? – Set the handset down and try the instructions above once more. If the phone still does not register, please contact one of the trained VOIP staff so we can investigate the cause.
Registering your phone
Before
Network
connector
cable
After
Network
connector
cable
Cable supplied
with boxed phone
See the VOIP Answer Place Topic (search on VOIP at http://ohioepa.custhelp.com) for instructions on how to get to these two web sites
You now have two working phones on your desk, but you won’t receive any calls on the new phone until the phone number is ported over (your CENTREX phone will stop working when the phone number is ported to the VOIP phone)
Register your phone with your phone
number (see next page for steps)