Quick Installation Guide Portable 4G LTE WiFi Hotspot MODEL NO: PRT7007L Version 1.00 (English / Indonesian) BEFORE GETTING STARTED This document is designed to aid you to get started with the device. If you experience problems following these guides or need further information pertaining to the device, please visit our website at www.prolink2u.com. All specifications are subject to the manufacturer’s configuration at the time of shipping and may change without prior notice, written or otherwise.
28
Embed
BEFORE GETTING STARTED - · PDF fileBEFORE GETTING STARTED Quick Installation Guide Portable 4G LTE WiFi Hotspot MODEL NO: PRT7007L Version 1.00 (English / Indonesian) This
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
BEFORE GETTING STARTEDThis document is designed to aid you to get started with the device. If you experience problems following these guides or need further information pertaining to the device, please visit our website at www.prolink2u.com. All specifications are subject to the manufacturer’s configuration at the time of shipping and may change without prior notice, written or otherwise.
1. Package Contents
Items: One (1) PROLiNK® PRT7007L with built-in 2300mAh Lithium (Li-ion) Battery
One (1) unit of USB Cable
One (1) piece of Quick Installation Guide (QIG)
1
2
3
Note:1. The illustrations in this document may appear different from your model.2. If any of above item is not packed in your package when open, please consult your reseller immediately.
BEFORE GETTING STARTEDThis document is designed to aid you to get started with the device. If you experience problems following these guides or need further information pertaining to the device, please visit our website at www.prolink2u.com. All specifications are subject to the manufacturer’s configuration at the time of shipping and may change without prior notice, written or otherwise.
2. Overview
4
1
Interface and Buttons1. SIM/USIM Card Slot / Reset Button2. WPS Button3. Power Button
EN 2
2
3
45
6
7
4. LCD Screen6. Charger/USB port7. AUX Antenna Connector8. Main Antenna Connector
IndicatorsWhen the device is powered on, the following icons may be displayed on the LCD screen. For a description of the icons, refer to the following table.
Network signal strength.
Network type. The 4G or 3G icon is displayed on the LCDscreen depending on the connected network.3G, 4G
The user is in roaming status.
2. Overview
3. Hardware Installation
EN 3
12 3
Network in use.
One or more new messages are received.
Wi-Fi status and the number of connected users.
Battery power.
Inserting SIM Card
1. Open the SIM (or USIM) card cover.
2. Insert a SIM (or USIM) card to the card slot, you will hear a click sound when the SIM (or USIM) card is locked in place.
3. Close the SIM (or USIM) card cover.
Note:1. Open the card slot cover gently.2. PRT7007L does not support the Micro/Nano SIM card. To avoid damaging the device, do not use Micro/Nano SIM cards or with any card holders.
EN 4
3. Hardware Installation
Note:1. If the system does not launch installation automatically, you can run the installation program in the path of My Computer > PROLiNK 4G.2. The driver of your device will be installed at the same time.
PRT7007L supports three working modes. i. USB Mode – Connection via the USB cable.
• Connect your device to the client with the USB cable.
• Power on your device.
• Follow the system prompts to complete the software installation.
• After the installation, the system will create a shortcut icon on your desktop. Double click on the shortcut and it will lead you to the web configuration page of PRT7007L.
Unless you need to change your 3G/4G settings or access the advanced settings of the device, you can access the Internet without the need to configure the device.The WAN connection mode is “Automatic” by default.
EN 5
ii. Wi-Fi mode - Connection via Wi-Fi
Power on your device directly.
It will take 1~2 minutes to initialize.
Use your normal Wi-Fi application on the client to search for the available wireless network.
Select the SSID of your device (default SSID isPROLiNK_PRT7007L_xxxxx), and then click Connect. The password is set as prolink12345 by default.
The WAN connection mode is “Automatic” by default. You can access the Internet without the need to configure the device.
If you need to change your 3G/4G settings or access the advanced settings of the device, refer to “Accessing the WebGUI configuration page”
3. Hardware Installation
EN 6
3. Hardware Installation
4. Web-based Con�guration
iii. Mixed Mode – Connection via both USB and Wi-Fi
This is a combination of using the USB cable and Wi-Fi connection.
Input the case-sensitive default password “password”, and then click Login to access the WebGUI configuration page.
Accessing the WebGUI Configuration PageMake sure the connection between your device and the client is active. Launch the Internet browser and enter http://192.168.123.1 or http://p.homeThe login page will appear as follow.
Select Settings > Wi-Fi Settings Change the basic wireless network settings, choose security mode and WPA type, and perform the WPS configuration.
Select Settings > Device Settings Change the Administrator settings, restore factory default, manage PIN or set the LAN interface configuration.
SettingAfter logging in, you can also select Settings, and do the following operations.
Quick SetupAfter logging in, select Settings > Quick Settings, and then the Quick Setup wizard will appear.
The Quick Setup wizard will guide you on setting up the basic parameters for your device in the safest way. After this procedure, you can use your Internet service.
4. Web-based Con�guration
Note:If you select Manual APN, please consult your ISP on the APN name to be entered.
EN 8
Enabling 2.4GHz / 5GHz Dual Bandi. Under Settings > Wi-Fi Settings > Basic Settings, select Enable for Multi SSID Switch and click Apply
4. Web-based Con�guration
Select Settings > Firewall Set the Mac/IP/Port Filtering, Port Forwarding or the System Security configuration.
Select Settings > Router Settings Change Router LAN IP and DHCP settings.
Select Settings > Internet Wi-Fi Connect to Hotspot as Wi-Fi repeater.
ii. Under Settings > Wi-Fi Settings > Advanced Settings, select Enable for Multi Band Switch and click Apply
4. Web-based Con�guration
EN 9
4. Web-based Con�guration
iii. Under Settings > Wi-Fi Settings > Basic / Advanced Settings, the Guest SSID / Guest SSID setting will appear. Users can view or edit 5GHz SSID and Password.
EN 10
Disconnect from the Internet1. Log in the WebGUI Configuration page, and go to Home.
2. Click Connect / Disconnect to connect or to terminate the Internet connection.
Sleep ModeThe device will enter into Sleep Mode when no users are connected to the device in 10 minutes. Press Power or WPS button to wake up the device.
Note:With USB connection and no Wi-Fi user connected to the device within 10 minutes, only the Wi-Fi function will be disabled. Hold the WPS button for about 3 seconds to enable this function.
Note:Turning off the device can also terminate the Internet connection.
4. Web-based Con�guration
EN 11
Items: Satu (1) PROLiNK® PRT7007L with built-in 2300mAh Lithium (Li-ion) Battery
Satu (1) unit of Kabel USB
Satu (1) buah Lembar Panduan Instalasi
1
2
3
Catatan:1. Ilustrasi dalam dokumen ini mungkin tampak berbeda dari model anda.2. Jika salah satu item di atas tidak dikemas dalam paket anda ketika terbuka, silakan berkonsultasi dengan reseller anda segera.
BEFORE GETTING STARTEDThis document is designed to aid you to get started with the device. If you experience problems following these guides or need further information pertaining to the device, please visit our website at www.prolink2u.com. All specifications are subject to the manufacturer’s configuration at the time of shipping and may change without prior notice, written or otherwise.
ID 2
2. Penjelasan
4
1
Tombol dan Antarmuka1. Slot Kartu SIM/USIM / Tombol Reset2. Tombol WPS3. Tombol Power
2
3
45
6
7
4. LCD Screen6. Charger/USB port7. AUX Antenna Connector8. Main Antenna Connector
IndikatorBila perangkat diaktifkan, ikon berikut akan ditampilkan pada layar LCD. Untuk penjelasan dari ikon, lihat tabel berikut.
Menunjukkan kekuatan signal.
jaringan signal meter. Signal yang di tunjukkan pada layartergantung signal yang didapat dari provider.3G, 4G
Menunnjukkan status roaming.
3. Instalasi Perangkat
12 3
Jaringan sedang digunakan.
Pesan SMS diterima.
Satus WIFI dan jumlah pengguna yang terkoneksi padaPRT7007L.
Battery.
Memasukkan Kartu SIM
1. Buka penutup SIM (atau USIM).
2. Masukkan SIM (atau USIM) ke dalam slot SIM, akan terdengar bunyi klik jika SIM (atau USIM) sudah benar-benar terpasang.
3. Tutup penutup SIM (or USIM).Catatan:1. Buka penutup SIM secara perlahan.2. PRT7007L tidak dapat mendukung Micro/Nano SIM, maka akan terjadi kerusakan, Jangan menggunakan Micro/Nano SIM.
ID 3
2. Gambaran
3. Instalasi Perangkat
Catatan:1. Jika sistem tidak memulai instalasi secara otomatis, Anda dapat menjalankan program melalui My Computer> PROLiNK 4G.2. Drivers perangkat Anda akan terinstal di waktu yang sama.
PRT7007L mendukung tiga modus kerja.i. Modus USB – Koneksi melalui kabel USB
• Koneksikan perangkat Anda ke klien dengan kabel USB.
• Hidupkan perangkat Anda.
• Ikuti sistem untuk menyelesaikan instalasi perangkat lunak.
• Setelah instalasi, sistem akan membuat ikon shortcut pada desktop Anda. Double klik pada shortcut dan akan membawa Anda ke konfigurasi Web halaman PRT7007L.
Kecuali Anda perlu mengubah pengaturan 3G/4G atau mengakses pengaturan lanjutan dari perangkat, Anda dapat mengakses Internet tanpa perlu mengkonfigurasi perangkat.
Modus koneksi WAN adalah "otomatis" secara default.
ID 4
ii. Modus WiFi – Koneksi melalui WiFi
Hidupkan perangkat Anda secara langsung.
Ini akan memakan waktu 1 ~ 2 menit untuk menginisialisasi.
Gunakan aplikasi WiFi normal pada klien untuk mencari nirkabel yang tersedia pada jaringan.
Pilihlah SSID dari perangkat Anda (Default SSID adalah PROLiNK_PRT7007L_xxxxx), lalu klik konek. Default password adalah prolink12345.
Modus koneksi WAN adalah "otomatis" secara default. Anda dapat mengakses Internet tanpa perlu mengkonfigurasi perangkat.
Jika Anda perlu mengubah pengaturan 3G/4G atau mengakses pengaturan lanjutan dari perangkat, lihat "Mengakses halaman konfigurasi WebGUI"
3. Instalasi Perangkat
ID 5
4. Web-based Con�guration
iii. Modus Campuran – Koneksi melalui WiFi dan USB
Ini adalah kombinasi dari menggunakan kabel USB dan Wi-Fi.
Masukkan password default "password", lalu klik Login untuk mengakses halaman konfigurasi WebGUI.
ID 6
Mengakses Halaman Konfigurasi WebGUIPastikan sambungan antara perangkat Anda dan klien aktif. Jalankan Internet browser dan masukkan http://192.168.123.1 atau http://p.home
Pilih Settings > Wi-Fi Settings Mengubah pengaturan jaringan nirkabel dasar, pilih Modus keamanan dan jenis WPA, dan melakukan konfigurasi WPS.
PengaturanSetelah login, Anda juga dapat memilih Settings, dan melakukan operasi berikut.
Pengaturan CepatSetelah login, pilih Settings > Quick Settings, dan kemudian wizard Pengaturan Cepat akan muncul.
Wizard Pengaturan Cepat akan memandu Anda tentang pengaturan parameter dasar untuk perangkat dengan cara yang paling aman. Setelah prosedur ini, Anda dapat menggunakan layanan Internet Anda.
4. Web-based Con�guration
Catatan:Jika Anda memilih APN Manual, silakan berkonsultasi dengan ISP Anda apa nama APN harus dimasukkan.
4. Web-based Con�guration
Pilih Settings > Device Settings Mengubah pengaturan Administrator, memulihkan standar pabrik, mengelola PIN atau mengatur konfigurasi antarmuka LAN.
Pilih Settings > Firewall Pengaturan Mac / IP / Port Filtering, Port Forwarding atau konfigurasi Sistem Keamanan.
Pilih Settings > Router Settings Ubah LAN Router IP dan pengaturan DHCP.
Pilih Settings > Internet Wi-Fi Terhubung ke Hotspot sebagai repeater Wi-Fi.
ID 8
Mengaktifkan 2.4GHz / 5GHz Dual Bandi. Menu settings > Wi-Fi Settings > Basic Settings, klik Enable untuk Multi SSID Switch dan klik Apply
4. Web-based Con�guration
ID 9
ii. Menu settings > Wi-Fi Settings > Advanced Settings, klik Enable untuk Multi Band Switch dan klik Apply
4. Web-based Con�guration
ID 10
iii. Menu Settings > Wi-Fi Settings > Basic / Advanced Settings, the Guest SSID / Guest SSID setting akan terlihat. Pengguna dapat melihat/mengubah setting untuk 5GHz SSID dan Password.
Mengakhiri koneksi dari Internet1. Masuk halaman Konfigurasi WebGUI, dan pergi ke Home.
2. Klik Connect / Disconnect untuk menghubungkan atau untuk mengakhiri koneksi internet.
Modus TidurPerangkat akan masuk ke Modus Tidur tanpa pengguna yang terhubung ke perangkat dalam 10 menit. Tekan tombol Daya atau WPS untuk bangun perangkat.
Catatan:Dengan koneksi USB dan tidak ada pengguna Wi-Fi ke perangkat dalam waktu 10 menit, hanya fungsi Wi-Fi yang akan dinonaktifkan. Tahan tombol WPS selama sekitar 3 detik untuk mengaktifkan fungsi ini.
Catatan:Mematikan perangkat ini juga dapat menghentikan koneksi Internet.
4. Web-based Con�guration
ID 11
KETE
NTU
AN
GA
RAN
SI
Kam
i men
guca
pkan
terim
a ka
sih
atas
kep
erca
yaan
And
a m
emili
h pr
oduk
kam
i dan
sel
aku
dist
ribut
or d
i Ind
ones
ia,
kam
i mem
berik
an g
aran
si p
rodu
k se
lam
a1 (s
atu)
tahu
n.
1. G
aran
si H
anya
Ber
laku
Jika
:
a. D
iisi d
enga
n je
las,
leng
kap
dan
bena
r.
b. Ji
ka te
lah
diki
rimka
n da
n di
terim
a ol
eh P
T. P
rolin
k In
tidat
a N
usan
tara
.
c. M
empe
rliha
tkan
kar
tu g
aran
si a
sli d
an n
ota
pem
belia
n pa
da s
aat k
laim
ser
vice
.
2. G
aran
si T
idak
Ber
laku
Apa
bila
:
a. K
erus
akan
yan
g di
seba
bkan
ole
h, k
elal
aian
pem
akai
, ben
cana
ala
m, k
ebak
aran
, teg
anga
n lis
trik
yan
g
te
rlalu
ting
gi /
rend
ah, t
erke
na c
aira
n.
b. K
erus
akan
yan
g di
akib
atka
n ka
rena
tran
spor
tasi
/ pe
ngiri
man
, pem
asan
gan
/ pen
gope
rasi
an y
ang
tidak
ses
uai
den
gan
buku
pet
unju
k, p
enya
mbu
ngan
den
gan
alat
lain
.
c. B
aran
g ya
ng d
iser
vice
tida
k se
suai
den
gan
kart
u ga
rans
i.
d. S
eria
l num
ber r
usak
/ ro
bek
/ tid
ak a
da.
3. R
uang
Lin
gkup
Gar
ansi
:
a. G
aran
si h
anya
men
caku
p ba
gian
-bag
ian
/ kom
pone
n pe
rang
kat k
eras
dar
i kon
�gur
asi s
tand
ar y
ang
terd
apat
pad
a sp
esi�
kasi
pro
duk
sesu
ai d
enga
n fa
ktur
.
b. K
husu
s ne
tboo
k ga
rans
i bat
erai
han
ya b
erla
ku s
elam
a 6
bula
n se
jak
tgl.
pem
belia
n.
* Bi
aya
peng
irim
an d
itang
gung
pem
beli
(for I
ndon
esia
regi
on o
nly)
Kepa
da Y
th.
Cust
omer
Ser
vice
PT. P
ROLI
NK
INTI
DAT
A N
USA
NTA
RAJl
. Cid
eng
Bara
t No.
79Ja
kart
a Pu
sat 1
0150
- In
done
sia
KART
U G
ARAN
SI
Tem
pelk
an p
eran
gko
disi
ni.
Han
ya u
ntuk
pen
gepo
san
di In
done
sia
(for I
ndon
esia
regi
on o
nly)
Tel /
Fax
:
Emai
l :
PT. P
rolin
k In
tidat
a Nu
sant
ara
Pela
ngga
n
Bara
ng—
——
—:
Prod
uk
Nam
a—
——
:Na
me
Mod
el :
S/N
:
Alam
at—
——
—:
Addr
ess
Tgl.
Pem
belia
n—
——
——
— :
Purc
hase
Dat
e
Deal
er :
——
—To
ko
:
Kota
:
——
—Ci
ty
:
Cap
Toko
Kota
:
Kode
Pos
:
KA
RTU
GA
RA
NSI
/ W
AR
RA
NTY
CA
RD
(for I
ndon
esia
regi
on o
nly)
Tel /
Fax
:
Emai
l :
PT. P
rolin
k In
tidat
a Nu
sant
ara
Pela
ngga
n
Bara
ng—
——
—:
Prod
uk
Nam
a—
——
:Na
me
Mod
el :
S/N
:
Alam
at—
——
—:
Addr
ess
Tgl.
Pem
belia
n—
——
——
— :
Purc
hase
Dat
e
Deal
er :
——
—To
ko
:
Kota
:
——
—Ci
ty
:
Cap
Toko
Kota
:
Kode
Pos
:
KA
RTU
GA
RA
NSI
/ W
AR
RA
NTY
CA
RD
(for I
ndon
esia
regi
on o
nly)
Worldwide Customer Care Centers
INDONESIA OfficePT PROLiNK INTIDATA NUSANTARAWalk-In : Jl. Cideng Barat No. 79, Jakarta Pusat 10150, Indonesia.Telephone : +62 21 3483 1777Email Support : [email protected]
MALAYSIA OfficeFIDA SYSTEMS (M) SDN BHDWalk-In : 29 Jalan USJ 1/31, 47600 Subang Jaya, Selangor Darul Ehsan, Malaysia.Telephone : +60 3 8024 9151Email Support : [email protected]
SINGAPORE OfficeFIDA INTERNATIONAL (S) PTE LTDWalk-In : Block 16 Kallang Place #06-02, Kallang Basin Industrial Estate, Singapore 339156.Telephone : +65 6357 0668Email Support : [email protected]