FULL OVER FULL END LADDER BUNK BED Bedz King BK981EL Thank you for purchasing your Furniture from Bedz King. Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at [email protected]page 1 of 13 (JULY 2018))
20
Embed
Bedz King Assembly Instructions | BK981EL | Full over Full ......the guardrails. Do not allow children under 6 years of age to use the upper bunk. Prohibit more than one person on
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FULL OVER FULL END LADDER BUNK BED Bedz King BK981EL
Thank you for purchasing your Furniture from Bedz King.
Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at [email protected]
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED
SAFETY WARNINGS AND GENERAL NOTES
Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
The top surfaces of the mattress must be at least 5" below the upper edge of the guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on the upper bunk.
Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed. Always prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night-light may provide added safety for a child using the upper bunk.
If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
Always use guardrails on both long sides of the upper bunk.
The use of a water or sleep floatation mattress is prohibited.
Keep these instructions for future reference.
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.
Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.
page 2 of 13 (July/2018)
from entrapment or falls:
To help prevent serious or fatal injuries
at least 5!
combined does not exceed 9!
Ensure thickness of mattress and foundation
37 Use only mattress which is 74!-75!
Never allow a child under 6 years on upper bunk.
1/2! -38 1/2
below upper edge of guardrails.
! wide on upper bunk.
long and
WARNING
DO
and mattress is
NOT REMOVE
hooks, belts, and jump ropes.
for use with the bed,for example, but not limited to
items to any part of the bunk bed that are not designed
STRANGULATION
Use ladder for entering and leaving upper bunk.
Prohibit more than one person on upper bunk.
Prohibit horseplay on or under bed(s).
Use guardrails on both sides of upper bunk.
HAZARD
THIS LABEL
- Never attach or hang
Pursuant to the Consumer Product Safety Improvement Act (CPSIA) Sec. 102 the manufacturer certifies compliance with the Consumer Product Safety Commission (CPSC) regulations listed below.
**** Product Information **** **** Safety Testing Information ****
Testing performed at one or more of the following independent testing locations: BUNK BED - BK 981 (Stairway) / BK 981EL (End Ladder)
Diversified Testing Laboratories Inc Armstrong Forensic Laboratory Date of Manufacture: 336 West Front Street 330 Loch'n Green Trail
Manufactured by: Custodian of Test Records: Bedz King LLC Manager of Compliance and Testing
Made in Brazil
Date Testing Location Regulation 816 111th Street Bedz King LLC January - April 2014 Armstrong 15 U.S.C. § 1278aArlington, TX 76011 816 111th Street November 2014 Armstrong 16 CFR 1303
Arlington, TX 76011 March 2014 Diversified ASTM F 1427-13 Children's Product Certificates avaliable at www.bedzking.com/certificates March 2014 Diversified 16 CFR 1213 and 16 CFR 1513
WARNING To help prevent serious or fatal injuries from entrapment or falls: - Use guardrails on both sides of upper bunk - Never allow a child under 6 years on upper bunk. - Prohibit horseplay on or under bed (s). - Use only ma�ress which is 74" - 75" long and 52 1/2" - 53 1/2" - Prohibit more than one person on upper bunk. wide on upper bunk. - Use ladder for entering and leaving upper bunk. - Use only ma�ress which is 74" - 75" long and 52 1/2" - 53 1/2" - STRANGULATION HAZARD - Never attach or hang wide on lower bunk. items to any part of the bunk bed that are not designed - Ensure thickness of ma�ress and founda�on combined does not for use with the bed, for example, but not limited to exceed 9" and ma�ress is at least 5" below upper edge of guardrails. hooks, belts and jump ropes.
To help prevent serious or fatal injuries!wide on upper bunk.
DO NOT REMOVE THIS
hooks, belts, and jump ropes.
for use with the bed,for example, but not limited to
items to any part of the bunk bed that are not designed
STRANGULATION
LABEL
Use ladder for entering and leaving upper bunk.
Prohibit more than one person on upper bunk.
WARNING
Prohibit horseplay on or under bed(s).
Use guardrails on both sides of upper bunk.
10
HAZARD
- Never attach or hang
Month/year of Mfg.:
Item#:
USAArlington. Texas 76011
816 111th Street
Bedz King LLC.
PO
4
07) G8+B7
11G8+B16 B5 B5
11 35
G8+B16 36 B5
G8+B7 05
10B5
10 B7+G8
28 B16+G8
5 B5
B7 04 B16+G8
4 G8
B7+G8
B7 - 04xG8 - 01x
B16
G8
B16 - 04x B5 - 04x
08) B16+G8
B5
15B5 B16+G828
B5 B16+G812 B5 B7+G8G8+B16 B7+G8
G8+B16 15
B5G8+B7 B5 12G8+B16
G8+B7 G8+B16 B5
B5
G8+B7 G8+B7
B7
B7
G8
G8 - 01x B7 - 08x B16 - 08x B5 - 08x
page 8 of 13 (July/2018)
C609) C6
A5 C6
D13A5
A5
A5 A5 D13
A5
D13 A5 A5
D13 A5A5
A5 - 16x D13 - 04x C6 - 02x
10) A10
A5 A10
A10 A5
37 A10 23 A10
A1018
A5
A10
A5
37
18 A1037
A10
A10
A10 - 10x A5 - 08x page 9 of 13 (July/2018)
11)
G4 46 47
A10 47
46
A10
A10 A10
G4
A10 A10
47
A10 A10
46 A10 A10
(12x)
A10
A10 G4
A10 A10
47
A10 - 28x G4 - 02x
12)
A10
A10
A10 A10 A10
A10A10
A10
A10 - 08x page 10 of 13 (July/2018)
13)
51
A10
Option: LEFT A10
A10 A10
51 C6 C6 32
C6
A10
A10
A10
A10
C6 - 03x A10 - 07x
page 11 of 13 (July/2018)
14)
A10
A10
Option: RIGHT
A10 A10
A10
51C6 C632
C6
A10
51
A10
A10
C6 - 03x A10 - 07x
page 12 of 13 (July/2018)
BEDDING SPECIFICATION
- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.
BED MATTRESS SPECIFICATIONS
Upper Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9".
Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.
REPLACEMENT PARTS
- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at [email protected] - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.
ASSEMBLY TIPS
- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.
READTHESE INSTRUCTIONS CAREFULLYBEFORE ATTEMPTINGTOASSEMBLETHIS BED
SAFETYWARNINGSAND GENERALNOTES
Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
The top surfaces of the mattress must be at least 5"below the upper edge of the guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on the upper bunk.
Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed.Always prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night-light may provide added safety for a child using the upper bunk.
If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
Always use guardrails on both long sides of the upper bunk.
The use of a water or sleep floatation mattress is prohibited.
Keep these instructions for future reference.
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.
Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.
page 2 of 7 (July/2018)
SCREWS ARE SHOWN IN ACTUAL SIZE Qty. Extra
A10
A22
B8
C3
3,5x30
4,0x16
7,0x50
10x40
8
4
8
8
+1
+1
D14 4
G8 1
G9 4
page 3 of 7 (July/2018)
01
C3
C3
C3
C3 - 08x
02
G8+B8
G8+B8
G8+B8
B8+G8
G8+B8
B8+G8
B8+G8
B8+G8
B8
G8
B8 - 08x G8 - 01x
page 4 of 7 (July/2018)
03
A10A10D14
A10A10 D14
A10A10D14
A10A10
D14
A10D14 A10
G9
G9
G9
G9
G9
A10 - 08x G9 - 04xD14 - 04x
page 5 of 7 (July/2018)
04
A22
A22 A22
A22 A22
A22 - 04x
page 6 of 7 (July/2018)
BEDDING SPECIFICATION
- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.
BED MATTRESS SPECIFICATIONS
TWIN OVER TWIN Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the lower bunk.
TWIN OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.
FULL OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.
REPLACEMENT PARTS
- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at [email protected] - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.
ASSEMBLY TIPS
- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.