INSTRUCTION BEARINGS DISASSEMBLE NOVATEC D661SB, D881SB, D991SB, DH41SB, DH61SB “Tools 661” for bearing disassembly. 1
BearingsDisassebly D661SB, D881SB, DH41SB
Mar 17, 2016
INSTRUCTION “Tools 661” for bearing disassembly. 1 2. Hub without side cap and tube 2 3. Use any tube to take out end cup with rubber O-ring. 3 5. Fasten the Expander Tube into hub. 4 7. Tight the hub by the Bolt Tool. 5 9. Take out the inner tube and sealed bearing 6
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
INSTRUCTIONBEARINGS DISASSEMBLE
NOVATEC D661SB, D881SB, D991SB, DH41SB, DH61SB
“Tools 661” for bearing disassembly.
1
1. Un-tighten side cap and remove tube
2. Hub without side cap and tube
2
3. Use any tube to take out end cup with rubber O-ring.
4. Put Expander Tube into the hub.
3
5. Fasten the Expander Tube into hub.
6. Put Expander to prop up Expander Tube inside.
4
7. Tight the hub by the Bolt Tool.
8. Use hammer to tap up the tool with sealed bearing.
5
9. Take out the inner tube and sealed bearing
10. The hub after disassemble.
6
Related Documents
