BeanDevice HI-INC

HI-INC Version

SmartSensor

Rethinking Sensing Technology

Mono or Bi Axial : +/- 15° , +/- 30° , +/-90°

Anti-Aliasing Filter 5th

Data Logger 1.000.000 data

acquisition

Streaming 60 SPS

IEEE 802.15.4 Antenna Diversity

Main Features

Wireless Inclinometer based on MEMS Technology Measurement range:

mono-axial or bi-axial +/-15°

mono-axial or bi-axial +/-30°

bi-axial +/-90°

Excellent resolution:

0,001° , for +/-15° & +/-30° version

0,0025° , for +/-90° version Excellent radio link thanks to the antenna diversity

developed by Beanair® Non contact actuation for faster installation Streaming mode: 60 SPS on each channel Maximum radio range : 500 m (L.O.S) Ultra-Power Radio Technology IEEE 802.15.4 Current consumption in sleeping mode : < 30 µA Embedded Data Logger : up to 1,000,000 data

acquisition records (with events dating) Entirely autonomous system with an integrated Li-

thium-Ion battery charger Anti-aliasing Butterworth filter (5th order) with a cut-

off frequency of 1 Hz to 2 KHz (remotely programma-ble from the BeanScape®)

Watertight aluminium enclosure IP66 (dimensions Lxlxh : 80x55x21 mm—weight 145g rechargeable bat-tery included) - suitable for Harsh Industrial Envi-ronment

Free Scilab scripts for FFT and PPV filtering

Platform Leveling and stabilization

Laser level rotation

Slope measurement (Building, infrastructure & construction)

Oil drilling

Axial rotor measurement

Applications

Wireless Inclinometer

±30° or ±15° or ±90° BeanDevice® HI-INC main

presentation video

http://youtu.be/63-2u-Wszc4

http://youtu.be/63-2u-Wszc4

2

HI-INC Version

SmartSensor

2 Rethinking Sensing Technology

3

HI-INC Version

SmartSensor


Remote configuration and monitoring

*Over-the-Air Configuration

OTAC*

The BeanScape® application allows

the user to view all the data transmitted

by the BeanDevice® HI-INC

With the OTAC (Over-the-Air configura-

tion) feature, the user can remotely

configure the BeanDevice® HI-INC.

Several data acquisition modes are available on the

BeanDevice® HI-INC :

Low Duty Cycle Data Acquisition mode (LDCDA): the data

acquisition is immediately transmitted by radio. The

transmission frequency can be configured from 1s to 24h.

Alarm Mode : the measured value is transmitted by radio

whenever an alarm threshold (fixed by the user) is

detected (4 alarms threshold levels High/Low).

Survey Mode : operates like the Alarm mode but the

device sends frequently a beacon frame informing its

current status.

Streaming Packet Mode: all measured values are

transmitted by packet within a continuous flow at 60

samples per second maximum

Streaming Mode: all measured values are transmitted in

real-time within a continuous flow at 60 samples per

second maximum

Math Mode : Values such as the mean value, minimum

value, maximum value and standard deviation are

calculated on sample time series and transmitted by

radio .

HI-INC

Antenna Diversity

While the vast majority of wireless sensors shows their

limits in harsh industrial environment, the

BeanDevice® HI-INC integrates an innovative antenna di-

versity design, allowing to optimize the radio link quality in

environments subject to random and diverse disturbance.

Diversity antenna improves the quality and reliability of a

wireless link by 30%.

4

HI-INC Version

SmartSensor


Embedded Data Logger up to 1,000,000

data acquisition records

The BeanDevice® HI-INC integrates an embedded DataLogger, which can be used to log data whenever

a Wireless Sensor Network can not be easily deployed on your site. All the data acquisition are stored on the

embedded flash and then transmitted to the BeanGateway® once a Wireless Sensor Network is established.

The DataLogger feature is compatible with all the data acquisition mode available on your BeanDevice®

HI-INC :

LowDutyCycle Data Acquisition

Alarm & Survey

Math

Streaming & Streaming packet ( maximum data rate : 60 samples per second for each axis)

Example: Tilt measurement on a bridge

The BeanDevice® HI-INC is configured with

the dataLogger feature. A standalone

installation of the BeanDevice® HI-INC will

be done on the bridge, without the necessity

to be connected to the BeanGateway®.

During the measurement campaign, all the

data acquisition are logged on the embedded

flash of the BeanDevice® HI-INC .

When a technician goes on the site with the

BeanGateway® , a request for a log transmis-

sion is sent by the BeanGateway® to the

BeanDevice®. Then the BeanDevice®HI-INC

starts sending all its logs . If all the logs are

transmitted to the BeanGateway® sucessful-

ly, the flash memory is erased and new logs

will be recorded;

BeanDevice HI-INC

The Datalogger feature is

activated on the BeanDevice

BeanGateway (WSN Coordinator)

Transmits all the data logs

Request for Logs transmission

BeanDevice HI-INC

5

HI-INC Version

SmartSensor


Sensor specifications

Inclinometer Technology Inclinometer based on MEMS Technology

Measurement resolution (Bandwidth 10 Hz)

HI-INC 15M & HI-INC 15B & HI-INC 30M & HI-INC 30B versions: 0,001° HI-INC 90B version : 0,0025°

Typical non-linearity

HI-INC 15M & HI-INC 15B versions: ±0,057°

HI-INC 30M & HI-INC 30B versions : ±0,11°

HI-INC 90B version: ±0,57°

Analog to Digital converter 16-bits, SAR architecture (Successive Approximation Register) with temperature compensation

Sensor frequency Response (-3 dB)

DC to 28 Hz

Noise spectral density

DC to 100 Hz

HI-INC 15M & HI-INC 15B & HI-INC 30M & HI-INC 30B versions: 0.0004 °/ √Hz

HI-INC 90B version: 0.0008 °/ √Hz

Anti-aliasing filter Butterworth 5th order filter – cut-off frequency remotely programmable (BeanScape®)

Over-the-air configuration (OTAC) parameters

Data Acquisition mode

(SPS = sample per second)

Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour

Alarm & Survey mode: 1s to 24 hour

Math Mode : 60 SPS maximum

Streaming Packet Mode: 60 SPS maximum

Streaming Mode: 60 SPS maximum Sampling Rate (in streaming and mode)

Minimum: 1 SPS Maximum: 60 SPS on each channel

Alarm Threshold 2 high levels alarms & 2 low levels alarms

Cut-off frequency (Anti-aliasing filter)

1– 100 Hz

Power Mode Sleeping, Sleeping with Network Listening & Active

TX Power -7 dBm / -1 dBm / 5 dBm / 11 dBm / 15 dBm / 18 dBm

Product reference

BND-HI-INC –MR –WP

MR– Measurement Range:

- 15M : mono-axial ±15° - 15B : bi-axial ±30° - 30M : mono-axial ±30° - 30B : bi-axial ±30° - 90B : bi-axial ±90°

WP– Wireless Technology

- IEEE : IEEE 802.15.4 (2006)

Example: BND-HI-INC-15B-IEEE—Wireless bi-axial inclinometer with +/-15° measurement range with IEEE 802.15.4 Wireless

Technology

6

HI-INC Version

SmartSensor


Others specifications

Embedded logger

Storage Capacity : up to 1 000 000 measurements

Integrated real time clock

Write/read Cycle: 400 000

Real Time Clock Extremely Accurate Real Time Clock for measurement timestamping

Integrated battery char-ger

Integrated Lithium-ion battery charger with high precision battery monitoring :

Overvoltage Protection, Overcurrent/Short-Circuit Protection, Undervoltage Protection

Battery Temperature monitioring

Current accumulation measurement

Current consumption

@ 3,3V

During data acquisition : 20 to 30 mA

During Radio transmission : 40 mA @ 5dBm , 70 mA @ 18 dBm

During Idle : < 30 µA

Operating Temperature Industrial temperature : -40 °C to +85 °C

Enclosure Aluminium & Watertight (IP66) enclosure

Dimensions in mm (L x W x H): 80x55x21 mm, Weight (battery included) : 145g

Shocks resistance 60g during 50 ms

Norms CE Labelling Directive R&TTE (Radio) ETSI EN 300 328

ROHS - Directive 2002/95/EC

External power supply External power supply : +8v to +28v

Rechargeable battery High density Lithium-Ion rechargeable battery capacity of 950 mAh (referenced as BAT0.95DMG)

Power-supply bloc

(Option) Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67)

Mechanical mounting

(Option) Screw mounting

RF specifications

Wireless Protocol Stack IEEE 802.15.4 (2006 version)

WSN Topology Point-to-Point / Star

Encryption AES 128 bits (AES integrated coprocessor)

Data rate 250 Kbits/s

RF Characteristics ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by Beanair®

TX Power -7 dBm to +18 dBm

Receiver Sensitivity -95,5 dBm to -104 dBm

Maximum Radio Range 500m (L.O.S)

Antenna Antenna diversity : 2 omnidirectional antenna with a gain of 2,2 dBi

Product specifications are subject to change without notice. Contact Beanair for latest specifications. MADE IN FRANCE

7

HI-INC Version

SmartSensor


Indoor Version

HI-INC

OR

Getting started with a Wireless Sensor Network

Outdoor Version

Scilab scripts for digital

signal processing

Free software for numerical computation

Description StarterKit Reference

Starterkit Wireless Inclinometer (Mono-Axial ±15°)

1 x BeanGateway Ethernet (Indoor version), Ref.: BGTW-ETH-IND

1 x BeanDevice HI-INC Inclinometer ±15° Mono-Axial , Ref: BND-HI-INC-15M-IEEE

1 x Beanscape Basic, Ref: BNSC_BASIC

1x Scilab Scripts for Digital Signal Processing (FFT and PPV Filtering)

SK_HI-INC-15M_IND

Starterkit Wireless Inclinometer (mono-axial ±30°)


1 x BeanDevice HI-INC Inclinometer ±30° mono-axial, Ref: BND-HI-INC-30M-IEEE



SK_HI-INC-30M_IND

8

HI-INC Version

SmartSensor


Getting started with a Wireless Sensor Network

Description StarterKit Reference

Starterkit Wireless Inclinometer (bi-axial ±15°)


1 x BeanDevice HI-INC Inclinometer bi-axial ±15°, Ref.: BND-HI-INC-15B-IEEE



SK_HI_INC_15B_IND



1 x BeanDevice HI-INC Inclinometer Bi-axial ±30°, Ref: BND-HI-INC-30B-IEEE



SK_HI_INC_30B_IND






SK_HI_INC_90B_IND

Starterkit Wireless Inclinometer (Mono-Axial ±15°)

1 x BeanGateway Ethernet (Outdoor version), Ref.: BGTW-ETH-OUT

1 x BeanDevice HI-INC Inclinometer ±15° Mono-Axial, Ref: BND-HI-INC-15M-IEEE



SK_HI-INC-15M_OUT

Starterkit Wireless Inclinometer (mono-axial ±30°)


1 x BeanDevice HI-INC Inclinometer ±30° mono-axial, Ref: BND-HI-INC-30M-IEEE



SK_HI-INC-30M_OUT



1 x BeanDevice HI-INC Inclinometer bi-axial ±15°, Ref.: BND-HI-INC-15B-IEEE



SK_HI_INC_15B_OUT






SK_HI_INC_30B_OUT






SK_HI_INC_90B_OUT

The BeanDevice® HI-INC operates only on our Wireless Sensor Networks , you will need the BeanGateway® and the BeanScape® for starting a wireless sensor

Network . 1, mail Gay Lussac

95000 Neuville-sur-Oise France

[email protected] Tel.:+33.(0)1.83.62.16.38

www.beanair.com

BeanDevice HI-INC

Documents