Top Banner
Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL
15

Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

Jan 17, 2016

Download

Documents

Teresa McKenzie
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

Beam-Test@CERN

I.LaktinehIPNL/IN2P3/UCBL

Page 2: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 2

Aims

• Test a mini DHCAL with new generation embedded electronics readout in beam conditions for the first time

• Use the high precision provided by EuDet telescope to study the inefficiency of GRPC

due to inter-pads and edge effects.

Page 3: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 3

Interpad: 500µ

HV

Signal

Graphite

Resistive platesGas

Pick-up pads

GRPC

Page 4: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 4

Test @ps-T10

Eudet Telescope

Mini DHCAL

Page 5: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 5

Test @ps-T10

Photogrammetry measurement

Page 6: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 6

EuDet Telescope photogrammetric spots

used for alignment

Moveable table

Test @ps-T10

Page 7: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 7

Spots positioning on both EuDet telescope and DHCAL Setup

Page 8: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 8

Beam position

Detector primary position

Detector next position3500 µ shift

(half of the sensor width)

.

.

.3 cm shift

For each position : 2000-3000 triggers

GRPC

GRPC

GRPC

Page 9: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

The touched pads in the 4 GRPC for successive positions

Second threshold

First threshold

32X8 pads

Page 10: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 10

Clusters and tracks reconstruction in mini DHCAL

Clustering :touched pads were gathered into clusters if relative distanceis less than 2cm.Pads having only one threshold: weight = 1Pads having two thresholds : weight = 2

Tracking :Clusters belonging to different detectorswere gathered into tracks if compatible with straight line

A simple reconstruction algorithm was used to study the GRPC detectors

Page 11: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 11

Inefficiency Study using EuDet Telescope

• The available beam at T10 is made of 1-6 GeV pions. 6 GeV pions were used for this study

• SciPM+TLU system was used as trigger for both EuDet telescope and the DHCAL so events in both detectors were associated.

• Due to multiple scattering in the 4 GRPC’s of the mini DHCAL (even with no absorber) only the first arm (3 sensors) was used to reconstruct tracks

• Using the alignment result from the photogrammetry measurement, tracks reconstructed in the first arm were projected to the GRPC’s. The clusters associated to those tracks are recorded.

• The efficiency of tracks reconstruction in Eudet is between 50 and 60%.

Page 12: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 12

expected position%seen for found clusters GRPC clusters position

Position expected from EuTelInter-pads position

preliminary

micron

Arb

itra

ry u

nit

Edge

Page 13: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 13

preliminary

Black: expected clusters from EuTelRed : Seen in GRPC

No clear evidence of the Inter-pads effect

Interpad position

micron

Edge position

Important edge effect?

?

Page 14: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 14

Black : Tracks associated to clusters with (1or2)threshold padsRed : Tracks associated to clusters with 2-threshold pads

preliminary

micron

Page 15: Beam-Test@CERN I.Laktineh IPNL/IN2P3/UCBL. I.Laktineh-IPNL2 Aims Test a mini DHCAL with new generation embedded electronics readout in beam conditions.

I.Laktineh-IPNL 15

Conclusion• The beam test realized using EuDet telescope was

very fruitful• Preliminary results show an edge effect but this

should be more investigated• No inter-pad effect in the GRPC (within the

available statistics). New version of GRPC with improved frame should reduce this effect.

• Apply the same study to the other three GRPC detectors.