THIS CROSS-REFERENCE GUIDE CONTAINS PRODUCTS MANUFACTURED OR SUPPLIED BY THE OLDEST AND FINEST QUALITY RESTORATION SHOP DEVOTED SOLELY TO THE RESEARCH, SUPPLY, AND REPRODUCTION OF PARTS FOR ANTIQUE ALL WHEEL DRIVE MILITARY AND CIVILIAN JEEP & TRUCK VEHICLES. THE REPRODUCTION PARTS AND CANVAS CONTAINED WITHIN ARE THE CLOSEST MATCH TO ORIGINAL PRODUCTION AVAILABLE TODAY. WE ARE CONSTANTLY STRIVING TO SUPPLY PARTS WITH THE HIGHEST QUALITY MATERIALS THAT MATCH OR EXCEED ORIGINAL SPECIFICATIONS AND APPEARANCE. ORIGINAL MANUALS, PHOTOGRAPHS, VEHICLES, AND PRODUC- TION RECORDS ARE USED TO ACCOMPLISH THIS. THIS CROSS REFERENCE GUIDE IS THE RESULT OF YEARS OF INVESTIGATION, AND IS DESIGNED TO ASSIST YOUR EFFORTS TO PRESERVE A TRUE PIECE OF U.S. HERITAGE. ROOM DOES NOT PERMIT US TO LIST ALL OF THE POSSIBLE PART VARIATIONS OR SUPPLY, SO IF YOU DON'T SEE WHAT YOU NEED, OR ARE SHOWING YOUR VEHICLE AND ARE CONCERNED ABOUT ORIGINALITY DEVIATIONS, PLEASE INQUIRE BEFORE YOU ORDER, AND WE WILL BE GLAD TO ASSIST YOU! MILITARY & CIVILIAN JEEPS*, TRUCKS, ARMOUR, AMPHIBIANS Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved The Bugler & Flying Jeep logos are registered trademarks & are the sole & exclusive property of Beachwood Canvas Works. The trademarks & this cross reference guide may not be used or reproduced in part or in whole without the express written permission from Beachwood Canvas Works. ** The HISTORY CHANNEL logo is a registered trademark of the A & E Television Network *JEEP is a registered trademark of the Chrysler Corporation 01OCT09 For current pricing, please visit us at www.beachwoodcanvas.com E-mail us at [email protected], or please call us! BEACHWOOD CANVAS WORKS ANTIQUE MILITARY & OFF ROAD VEHICLE SPECIALISTS 39 LAKE AVENUE P.O. BOX 137 ISLAND HEIGHTS, NEW JERSEY U.S.A. 08732-0137 PHONE: (732)-929-3168 Ext.1 FAX: (732)-929-3479 SEE US ON THE HISTORY CHANNEL** "Big Rigs of Combat; Part 2: "THE JEEP" & "MAIL CALL!" R R R C
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
THIS CROSS-REFERENCE GUIDE CONTAINS PRODUCTS MANUFACTURED OR SUPPLIED BY THE OLDEST AND FINEST QUALITY RESTORATION SHOP DEVOTED SOLELY TO THE RESEARCH, SUPPLY, AND REPRODUCTION OF PARTS FOR ANTIQUE ALL WHEEL DRIVE MILITARY AND CIVILIAN JEEP & TRUCK VEHICLES. THE REPRODUCTION PARTS AND CANVAS CONTAINED WITHIN ARE THE CLOSEST MATCH TO ORIGINAL PRODUCTION AVAILABLE TODAY. WE ARE CONSTANTLY STRIVING TO SUPPLY PARTS WITH THE HIGHEST QUALITY MATERIALS THAT MATCH OR EXCEED ORIGINAL SPECIFICATIONS AND APPEARANCE. ORIGINAL MANUALS, PHOTOGRAPHS, VEHICLES, AND PRODUC-TION RECORDS ARE USED TO ACCOMPLISH THIS. THIS CROSS REFERENCE GUIDE IS THE RESULT OF YEARS OF INVESTIGATION, AND IS DESIGNED TO ASSIST YOUR EFFORTS TO PRESERVE A TRUE PIECE OF U.S. HERITAGE. ROOM DOES NOT PERMIT US TO LIST ALL OF THE POSSIBLE PART VARIATIONS OR SUPPLY, SO IF YOU DON'T SEE WHAT YOU NEED, OR ARE SHOWING YOUR VEHICLE AND ARE CONCERNED ABOUT ORIGINALITY DEVIATIONS, PLEASE INQUIRE BEFORE YOU ORDER, AND WE WILL BE GLAD TO ASSIST YOU!
MILITARY & CIVILIAN JEEPS*, TRUCKS, ARMOUR, AMPHIBIANS
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights ReservedThe Bugler & Flying Jeep logos are registered trademarks & are the sole & exclusive property of Beachwood Canvas Works.
The trademarks & this cross reference guide may not be used or reproduced in part or in whole without the express written permission from Beachwood Canvas Works.
** The HISTORY CHANNEL logo is a registered trademark of the A & E Television Network *JEEP is a registered trademark of the Chrysler Corporation
01OCT09
For current pricing, please visit us at www.beachwoodcanvas.com
REQUIRED PER VEHICLE: If there is no * after the part number description, only one part number is required per vehicle; **2= RPV; ***3= RPV; ****4= RPV
+CJ3A USED THE MILITARY JUNIOR OIL FILTER CANNISTER B0133-C UP TO S/N 40352. AFTER THAT, CJ3A'S USED THE SMALLER 2A0133-L OIL CANNISTER.
2A0135-I & 2A0135-O CAN BE USED WITH B0133-C WITHOUT FLARE FITTINGS B0133-SFIT & 2A0307-FIT.
^THESE PARTS ARE FOR M38 M38A1 M170 WITH FULL SIZE MILITARY JUNIOR OIL FILTERS, NOT CUNO STYLE OIL FILTERS.
^^USE B0116, B0124, B0125, B0126, & B0141 FOR CJ2A'S WITH CHAIN TIMED ENGINES UP TO S/N 44417. AFTER S/N 44417, USE 2A0116, 2A0124, 2A0125, & 2A0141.
^^^B0134 HAS TRIANGULAR CUTOUTS IN BRACKET. C0134 HAS CIRCULAR CUTOUTS IN BRACKET. OTHERWISE INTERCHANGEABLE. @ B0131-MK INCLUDES (1) B0714, (2) B0131, & (1) B0811.
2. B0143, 2A0143, 3A01433. Part of B01044. B01315. B0108-I8. B0111-S TO -8010. B0310-D16. B0116, 2A011618. B011720. B0110, B0110-T23. B0156, 2A0156, C015624. B0110-NUT, 2A0110-NUT28. B0103, G0103, 2A0103, 3A0103, or C010332. B0105, Part of B010433. B0153, B0154, B015544. B0144, B0144-C45. B0121-I46. B0121-E55. B015756. B0157-R 57. B0147-I58. B013959. B0120-I72. B0107, Part of B010476. B0141, 2A014177. B0104-TCG, Part of B010479. 2A0104-CSF, Part of B010481. B012682. B012583. 2A012584. B012485. 2A012486. B0114-13, B0114-2490. B0111-S TO -8091. B0113-S TO -6092. B0112-S TO -6099. B0106, Part of B0104103. B0128, 2A0128120. B0108-E123. B0149
If no * after the part number description, only one part number is required per vehicle; **= 2 rpv; ***= 3 rpv; ****= 4 rpv
MB & GPW ARRANGEMENT SHOWN (SIMILAR TO MANY 4 CYLINDER JEEPS)
+ M38 HAD (2) DIFFERENT BELL HOUSINGS; (801628 OR 801629 TO S/N 74419; 804812 (D0201) AFTER S/N 74419 WHICH IS ALSO FOR M38A1) AS A RESULT M38'S ALSO HAD TWO DIFFERENT INSPECTION COVERS, STARTERS, BELL HOUSING PLATES, RING GEARS, FLYWHEELS, & USED (B0660) UP THROUGH SN 74419.
++ CJ3B CJ5E CJ6E USED 2 BELL HOUSINGS; (802929 TO S/N 45142035,912799 AFTER ENGINE SERIAL NUMBER 4J-142035)* B0210-E IS THE EARLY WWII STYLE CAST PEDAL. B0210-L IS THE LATE STYLE SHEET METAL PEDAL USED ON OTHER VEHICLES ALSO.
@ EARLY CJ2A UPTO S/N 49297 USED B0217 (A-5121); AFTER S/N 49297 USE 2A0217 (642280) UP TO LATE 1949, THEN USE 3A0217 (642237) @@ ALL CJ3A USE 3A0217 (642237)
* CORE CREDITS ALLOWED ON SOME CARBURETORS. + 3A0307 IS A GOOD CIVILIAN SUBSTITUTE FOR C0307 WITH A VACUUM CANISTER BUT NO PRIMER HANDLE.** MB, GPW, CJ2A, CJ3A & M38 USED OAKES B0313 AIR CLEANERS. CJ2A & CJ3A ALSO USED DONALDSON AIR CLEANERS 2A0313. THEY ARE INTERCHANGEABLE.
B0313, 2A0313, & C0313 ARE PHYSICALLY INTERCHANGEABLE.
*** B0313-R IS A MODERN REPLACEMENT AIR CLEANER THAT BOLTS TO THE CARB MOUTH. IT USES A REPLACEABLE AIR FILTER B0313-R-E.
B0311
B0308-RB0308-S
B0545-2B0545-E*B0545-L*
B0312
B0338B0338-LD
B0318
B0319
B0324
B0340
B0317-LB0317-R
B0311
B0310-D
B0546-3B0546*
B0546-15 B0546*
1. B0318 (HAND CHOKE)
2. B0319 (HAND THROTTLE)
5. B0318-CN (CABLE NUT)
7. B0338 or B0338-LD
(RETURN SPRING)
12. B1827 (FOOT REST)
13. B0324 (PEDAL)
B0545-5B0545-E*B0545-L* B0318-CN
GROUP 03: FUEL
B0546-15B0336
ORDER NUMBERS
B0303-RB0303-G
B0302-EB0302-LB0302-GB0304B0305
B1827
B0337
B0308-RB0308-S
B0301-EH B0301 -LHB0307-FIT
B0307-FIT
B0337
B0315
B0337*
B0307
2A0307
B0306
MB & GPW SYSTEM SHOWN. OTHER
MILITARY JEEPS USED
SIMILAR , BUT NOT IDENTI-
CAL ARRANGEMENTS.
USE THESE DRAWINGS AS
GUIDES.
MB or GPW
Copyright 2005 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 12
C
CLAMP TYPES USED IN
CLAMP KITS.
MB/GPW HOSE KIT B0545-L IS SHOWN AT LEFT.
THIS KIT REQUIRES ADDITIONAL METAL SPACERS
B0513 & B0514. KIT B0545-E USES FULL LENGTH
RUBBER HOSES & DOES NOT
REQUIRE METAL SPACERS. (13) PIECE CLAMP
KIT B0546 IS ALSO SHOWN HERE. USE B0546 FOR
EITHER B0545-E OR B0545-L HOSE KIT.
B0546 CLAMP KIT ALSO INCLUDES
(2) B0546-SI WIRE HOSE CLAMPS USED ON B0314
AIR CLEANER INTAKE HOSE.
B0314 IS NOT IN KITS B0545-E OR B0545-L.
B0514
GROUP 05: COOLING
OIL FILLER TUBE
BREATHER HOSE
CARB HORN HOSE
B0546-SIB0513
RADIATOR, BOTTOM MOUNT B0501 G0501 2A0501 2A0501* ---- ---- ---- ---- ----RADIATOR, SIDE MOUNT TO GRILL ---- ---- ---- 3A0501-SM* C0501 3B0501 5E0501 5E0501 D0501PETCOCK, DRAINAGE COOLING SYSTEM B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PCCAP, RADIATOR B0512 B0512 B0512 B0512 B0512 B0512 B0512 B0512 B0512WELT KIT, RADIATOR TO FRAME MOUNT B1540-RAD B1540-RAD B1540-RAD B1540-RAD* ---- ---- ---- ---- ----PUMP, WATER W/ SINGLE GROOVE PULLEY (6 OR 12V JEEPS) B0502 B0502 2A0502 2A0502 2A0502^ 2A0502 2A0502 2A0502 2A0502^PUMP, WATER W/ DUAL GROOVE PULLEY (24V JEEPS) ---- ---- ---- ---- C0502^ ---- ---- ---- C0502^PULLEY FOR WATER PUMP WITH B0504 SINGLE FAN BELT B0511 B0511 B0511 B0511 B0511^ B0511 B0511 B0511 B0511^PULLEY FOR WATER PUMP WITH C0504 DOUBLE FAN BELT ---- ---- ---- ---- C0511^ ---- ---- ---- C0511^PULLEY, CRANK FOR (6v or 12V) B0504 SINGLE FAN BELT B0156 B0156 2A0156 2A0156 2A0156^ 2A0156 2A0156 2A0156 2A0156^PULLEY, CRANK FOR (24V) C0504 DOUBLE FAN BELTS ---- ---- ---- ---- C0156^ ---- ---- ---- C0156^BELT, FAN FOR B0502 OR 2A0502 PUMPS (6V & 12V) B0504 B0504 B0504 B0504 B0504^ B0504 B0504 B0504 B0504^BELTS, FAN (PAIR) FOR C0502 PUMPS (24V) ---- ---- ---- ---- C0504^ ---- ---- ---- C0504^GASKET, WATER PUMP B0502-G B0502-G B0502-G B0502-G B0502-G B0502-G B0502-G B0502-G B0502-GGASKET & SEALS, WATER PUMP REBUILD B0503-R B0503-R B0503-R B0503-R B0503-R B0503-R B0503-R B0503-R B0503-RFAN ASSEMBLY B0510 B0510 B0510 B0510 B0510 B0510 B0510 B0510 B0510THERMOSTAT B0507 B0507 B0507 B0507 B0507 B0507 B0507 B0507 B0507HOUSING, THERMOSTAT CASTING B0508 G0508 B0508 B0508 B0508 3B0508 3B0508 3B0508 3B0508GASKET, THERMOSTAT B0509 B0509 B0509 B0509 B0509 3B0509 3B0509 3B0509 3B0509RETAINER, THERMOSTAT MOUNT IN B0508 OR G0508 B0516 B0516 B0516 B0516 B0516 ---- ---- ---- ----HOSE KIT, ALL RUBBER BOTTOM MOUNT RADIATOR B0545-E@ B0545-E@ B0545-E@ B0545-E@ ---- ---- ---- ---- ----HOSE KIT, (SPACERS NEEDED) BOTTOM MOUNT RADIATOR B0545-L@ B0545-L@ B0545-L@ ---- ---- ---- ---- ---- ----TUBE, LOWER METAL CURVED SPACER B0513** B0513** B0513** ---- ---- ---- ---- ---- ----TUBE, UPPER METAL STRAIGHT SPACER B0514** B0514** B0514** ---- ---- ---- ---- ---- ----HOSE KIT FOR SIDE MOUNT TO GRILL RADIATORS ---- ---- ---- 3A0545-SM* C0545 3B0545 5E0545 5E0545 D0545HOSE, 2-1/4" DIA. x1 1/2" CROSSTUBE TO CARB HORN B0545-2+ B0545-2+ B0545-2+ B0545-2+ ---- ---- ---- ---- B0545-2+HOSE, 5" OFFSET CROSSTUBE TO CARB HORN ---- ---- ---- ---- C0545-5 ---- ---- ---- ----HOSE, OIL FILLER TUBE TO CROSSTUBE (B0312) B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+HOSE,SMALL CURVED BY-PASS 90 DEGREE ---- ---- ---- ---- C0545-B C0545-B C0545-B C0545-B C0545-BCLAMP KIT, HOSE ENGINE COMPARTMENT B0546 B0546 B0546 B0546 C0546 3B0546 3B0546 3B0546 D0546CLAMP, HOSE OIL FILLER TO CROSSTUBE B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++CLAMP, CARB HORN (B0311) TO CARB B0546-15++ B0546-15++ B0546-15++ B0546-15++ B0546-15++ ---- ---- ---- ----BAG,CANVAS WATER SPOUT RAD. FILL B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398HAIR KIT, RADIATOR GRILL B1732 B1732 2A1732 2A1732* C1732 ---- ---- ---- ----
**USE WITH B0545-L KIT AS SHOWN BELOW.*LATE CJ3A STARTED USING A SIDE MOUNT TO GRILL RATHER THAN BOTTOM MOUNT RADIATOR AFTER S/N 21656; ONLY BOTTOM MOUNT RADIATOR NEEDS B1540-RAD OR 2A1732.
B0501, G0501, 2A0501 RADIATORS ARE BOTTOM MOUNT STYLES^ 24 VOLT SYSTEM ’M’ SERIES JEEPS USED (2) FAN BELTS. ORDER (1) PAIR OF BELTS C0504 PER VEHICLE. IF THE VEHICLE WAS CONVERTED TO 6 OR 12 VOLT, USE (1) B0504.
@EARLY CJ2A USED B0545-L MB H0SE KITS UP TO S/N 170064. B0545-L REQUIRES B0513,B0514 METAL SPACERS,BO545-E REQUIRES NO METAL SPACERS, THEY ARE FULL RUBBER HOSE DESIGN.
+ ALSO PART OF KITS B0545-E, B0545-L, 3A0545-SM, & D0545++ ALSO PART OF KITS B0546, C0546 & D0546, +++ ALSO PART OF B0546, C0546, D0546 & 3B0546
SINGLE CONTACT DUAL CONTACT SINGLE CONTACT CLEAR PLASTIC MILK WHITE GLASS ORANGE PLASTIC
MB & GPW WIRING HARNESSES:WE TAKE GREAT PAINS TO ASSURE THE ORIGINALITY OF THESE HARNESSES. UNLIKE OTHER GENERIC ONE STYLE "FIT ALL
YEAR" HARNESSES AVAILABLE ON THE MARKET, WE BUILD OUR HARNESSES TO SUIT YOUR PARTICULAR JEEP'S YEAR AND ALL
OF THE VARIATIONS FOR EACH MODEL JEEP. (PLEASE NOTE: B0657-1 & B0657-2 TAIL LIGHT CONNECTORS MUST BE ORDERED SEPA-
RATELY & ARE NOT PART OF THESE KITS). BELOW IS A GENERAL DESCRIPTION OF EACH HARNESS' WIRING FEATURES:
B0601-41** : 1941 TO MID 1942; EARLY "FORD OR WILLYS SCRIPT" REAR PANEL JEEPS;
NO TRAILER SOCKET, HAS FIREWALL FILTERETTE, NO FENDER BLACKOUT LIGHT
B0601 *: MID-1942 TO 1944 STANDARD WAR PRODUCTION JEEPS WITH JERRY CAN ON REAR PANEL;
HAS TRAILER SOCKET, HAS FIREWALL FILTERETTE, HAS FENDER BLACKOUT LIGHT
B0601-44 ***: 1944 TO 1945 LATE WAR JEEPS WITH JERRY CAN & LATE WAR CHANGES;
HAS TRAILER SOCKET, NO FIREWALL FILTERETTE, HAS FENDER BLACKOUT LIGHT
SINGLE CONTACT- 2A0604 ^# 2 B0670-6 B0670-12 C0670-24 2A0607-E^ 2A0606-E (REPLACES 1940'S STYLE ORIGINAL GRILL LIGHT; SERVES EITHER AS A SIGNAL BLINKER OR RUNNING LIGHT) 2A0607-EG^ 2A0606-E 2A0607-EO^ 2A0606-E SINGLE CONTACT-DOUGLASS C0604-TS ^ 2 C0675-6 C0675-12 C0675-24 ----- ----- SINGLE CONTACT-PACKARD E0604-TS ^ 2 C0675-6 C0675-12 C0675-24 ----- ----- (M-SERIES MILITARY STYLE HOSUING; SERVES EITHER AS A SIGNAL BLINKER OR RUNNING LIGHT) DOUBLE CONTACT- 2A0604-DF ^# 2 B0670-6DF B0670-12DF C0670-24DF 2A0607-E^ 2A0606-E (REPLACES ORIGINAL GRILL LIGHT; SERVES AS BOTH A SIGNAL BLINKER AND RUNNING LIGHT) 2A0607-EG^ 2A0606-E 2A0607-EO^ 2A0606-E
(LIGHT or (BULB NUMBER)
VEHICLE DESCRIPTION SOCKET) RPV 6V 12V 24V LENS RING
"BULLET STYLE" FENDER OR GRILL MOUNTED TURN SIGNAL LIGHTS
THESE WILL ALL WORK AS GRILL MOUNTED FOR:
MB GPW & WWII VEHICLESM38 M38A1 M170
EARLY 1945-46 CJ2A--------OR----------
FENDER MOUNTED ON:ALL JEEPS OR TRUCKS
GROUP 06: ELECTRICAL
^ SUPPLIED WITH PLASTIC ORANGE (AMBER) LENS. #ORDER ADDITIONAL 2A0607-E TO GET A CLEAR PLASTIC LENS; 2A0607-EG FOR A MILK GLASS LENS.
CJ2A WIRING HARNESSES:IN ORDER TO ASSURE PERFECT ORIGINALITY, WHEN YOU ORDER A CJ2A WIRING HARNESS, PLEASE TELL US:
1) WHETHER YOUR JEEP HAS THE COIL ON THE BLOCK OR UNDER THE DASH
2) WHETHER THE HORN IS MOUNTED ON THE FIREWALL OR LEFT FENDER
3) WHETHER THE HORN BUTTON WIRE COMES OUT OF THE BOTTOM OF THE STEERING COLUMN OR CONNECTS TO
THE HORN BRUSH B0635 ON THE SIDE OF THE COLUMN
4) WHETHER YOU ARE USING ONE OR TWO TAILLIGHTS
5) WHETHER THE DASH LIGHT TURNS ON WITH THE MAIN HEADLIGHT SWITCH OR HAS A SEPARATE TOGGLE SWITCH
ON THE BOTTOM EDGE OF THE DRIVER'S SIDE OF THE DASH
6) WHETHER YOU WANT THE JEEP TO BE WIRED WITH TURN SIGNALS OR NOT
@ 3B0601-E & 3B0601-ETS ARE FOR EARLY 1950S CJ3B'S WITH 5 SEPARATE DASH GAUGES. 3B0601-L & 3B0601-LTS ARE FOR LATE 1960'S CJ3B'S WITH A SINGLE LARGE DASH GAUGE.
#= 1 RPV (NOT INCLUDED IN WIRING HARNESS ORDER SEPARATELY ) ###= 3 RPV (NOT INCLUDED IN WIRING HARNESS ORDER SEPARATELY )
ORIGINAL STYLE WIRING HARNESSES (CLOTH COVERED; COLOR CODED!)
FENDER B/O LIGHT ASS'Y,ECONOMICAL (VIETNAM) E0608-24T# E0608-24T# ---- ---- E0608-24T# ---- ---- ---- E0608-24T#+B0608-BKT IS A WILLYS DESIGNED BRACKET USED ON BOTH MB & GPW. SOME EARLY FORD SCRIPT JEEPS USED A SLIGHTLY DIFFERENT BRACKET.
# M151 TAKEOUT MILITARY FENDER B/O LIGHT ASSY WITH BRACKET. ECONOMICAL REPLACEMENT FOR WWII & KOREAN FENDER B/O LIGHT ASSEMBLIES.
GROUP 06: ELECTRICAL
**GOOD PRACTICAL REPLACEMENT FOR C0638-C CAP, C0638-N NUT, C0638-ROD, & C0617 SWITCH ON AN M38, M38A1, OR M170.B/O=BLACKOUT T/O=TAKEOUT OR USED OLD STOCK NOS=NEW OLD STOCK W/O=WITHOUT W/=WITH
"LIGHT" USUALLY REFERS TO COMPLETE LIGHT ASS’Y (BULB AND BUCKET ). "LAMP" OR "BULB" USUALLY REFERS TO BULB ONLY.*USE B0610 ON CJ2A'S UP THROUGH SERIAL NUMBER 47099, AND 3A0610 AFTER S/N 47099.
*MANY ORGINAL CJ2A COILS WERE MOUNTED UNDER DASH WITH INTEGRAL KEY. THESE ARE NO LONGER AVAILABLE. TO SIMULATE THIS, ORDER B0620 KEY SWITCH & MOUNT COIL B0647-6 OR B0647-12 UNDER THE DASH.
IGNITION
C0623 B0618 B0624-P B0619 B0624-B0 B0622
B0621B0620
B0649 3B0642
C0649
+ THIS TOGGLE SWITCH IS LOCATED UNDER THE LEFT HAND SIDE OF THE DASH ON 1945-46 CJ2A 'S & WAS USED TO TURN ON THE DASH PANEL LIGHT. AFTER MID 1946 THE MAIN LIGHT SWITCH, 2A0622 & 2A0624-LS (SOLD SEPARATELY) WAS USED TO TURN ON THE DASH PANEL LIGHTS.
@ RETROFIT SPRING LOADED RETURN KEYED IGNITION SWITCH USED FOR ANY JEEP RETRO FITTED WITH B0697-6 & B0697-12 SOLENOIDS.
GENERATOR, 6V (ORIGINAL STYLE) B0640-6 B0640-6 2A0640-6 2A0640-6 ---- 2A0640-6 2A0640-6 2A0640-6 ----GENERATOR, SUPER LARGE ORIGINAL 12V B0640-12* B0640-12* ---- ---- ---- ---- ---- ---- ---- GENERATOR, STD SIZE CONVERSION 6V 2A0640-6 2A0640-6 2A0640-6 2A0640-6 2A0640-6 2A0640-6 2A0640-6 2A0640-6 2A0640-6GENERATOR, STD SIZE CONVERSION 12V 2A0640-12 2A0640-12 2A0640-12 2A0640-12 2A0640-12 2A0640-12 2A0640-12 2A0640-12 2A0640-12GENERATOR, 24V ---- ---- ---- ---- C0640-24 ---- ---- ---- C0640-24PUMP, WATER W/ SINGLE GROOVE PULLEY (6 OR 12V JEEPS) B0502 B0502 2A0502 2A0502 2A0502 2A0502 2A0502 2A0502 2A0502PUMP, WATER W/ DUAL GROOVE PULLEY (24V JEEPS) ---- ---- ---- ---- C0502 ---- ---- ---- C0502PULLEY FOR WATER PUMP WITH B0504 SINGLE FAN BELT B0511 B0511 B0511 B0511 B0511 B0511 B0511 B0511 B0511PULLEY FOR WATER PUMP WITH C0504 DOUBLE FAN BELT ---- ---- ---- ---- C0511 ---- ---- ---- C0511PULLEY, CRANK FOR (6v or 12V) B0504 SINGLE FAN BELT B0156 B0156 2A0156 2A0156 2A0156 2A0156 2A0156 2A0156 2A0156PULLEY, CRANK FOR (24V) C0504 DOUBLE FAN BELTS ---- ---- ---- ---- C0156 ---- ---- ---- C0156BELT, FAN FOR B0502 OR 2A0502 PUMPS (6V & 12V) B0504 B0504 B0504 B0504 B0504 B0504 B0504 B0504 B0504BELTS, FAN (PAIR) FOR C0502 PUMPS (24V) ---- ---- ---- ---- C0504 ---- ---- ---- C0504ARM, GENERATOR SWING UPPER B0665-U B0665-U B0665-U*** 2A0665-U C0665-U 3B0665-U 3B0665-U 3B0665-U C0665-USPRING, GEN SWING ARM TENSION B0665-SPG B0665-SPG B0665-SPG*** ---- ---- ---- ---- ---- ----SPRING, GEN SWING ARM (ALTERNATE) B0216 B0216 B0216*** ---- ---- ---- ---- ---- ----BRACKET, GENERATOR SUP.LOWER B0665-L B0665-L B0665-L B0665-L B0665-L B0665-L B0665-L B0665-L B0665-LGROMMET, GENERATOR SUP.LOWER** B0665-G B0665-G B0665-G B0665-G B0665-G B0665-G B0665-G B0665-G B0665-GBOLT, (SHOULDER)GENERATOR MOUNT** B0665-B B0665-B B0665-B B0665-B B0665-B B0665-B B0665-B B0665-B B0665-B
*THIS IS THE ORIGINAL SUPER LARGE GPA STYLE 12 VOLT GENERATOR THAT REQUIRES UNDER HOOD BATTERY RELOCATION IF YOU CONVERT TO 12V, AND DO NOT WANT TO MOVE YOUR BATTERY, USE 2A0640-12. **TWO REQUIRED PER VEHICLE
***CJ2A USED B0665-U, B0216, B0665-SPG UP THROUGH ENGINE SERIAL NUMBER 47111, AFTER THAT USE 2A0665-U AND NO SPRINGS.
^ THIS IS A BATTERY THAT CRANKS YOUR 6V STARTER AT 12V, THEN WHEN THE ENGINE STARTS, SWITCHES TO 6V! ^^ THIS 12V BATTERY REPLACES THE ORIGINAL 6 VOLT BATTERY AND STILL FITS WITHIN THE ORIGINAL BATTERY TRAY FOOT PRINT.
**TWO REQUIRED PER VEHICLE ***THREE REQUIRED PER VEHICLE ****FOUR REQUIRED PER VEHICLE
NOTE: YOU MUST MATCH ALL GENERATORS & VOLTAGE REGULATORS & PROPERLY POLARIZE PRIOR TO OPERATION. PLEASE ASK FOR ASSISTANCE PRIOR TO ORDERING.
NOTE: YOU MUST MATCH ALL GENERATORS & VOLTAGE REGULATORS & PROPERLY POLARIZE PRIOR TO OPERATION. PLEASE ASK FOR ASSISTANCE PRIOR TO ORDERING.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 18
ORIGINAL STYLE LIGHT SPOTTERS GUIDE
VEHICLE DRIVER TAIL PASSENGER TAIL DASH GRILL LENS RING SOCKET
6V: B06WT-6L 6V: B06WT-6R 12V: B06WT-12L 12V: B06WT-12R B0616 (6 OR 12V) B0604 (6 OR 12V)
M38 M38A1 M170 DRIVER SIDE B/O NEW C0613 UPPER LARGE C0675-6 C0675-12 C0675-24M151 & M-SERIES DRIVER SIDE B/O NEW E0613 UPPER SMALL B0670-6 B0670-12 C0670-24 LOWER SMALL B0670-6 B0670-12 C0670-24
M38 M38A1 M170 PASSENGER SIDE B/O NEW C0614 UPPER SMALL B0670-6 B0670-12 C0670-24M151 & M-SERIES PASSENGER SIDE B/O NEW E0613 LOWER SMALL B0670-6 B0670-12 C0670-24
UNLESS NOTED, GRILL MOUNTED PARKING/BLACKOUT LIGHTS ARE NOT SUPPLIED W/ BULBS. YOU MUST ORDER THEM SEPARATELY.^BOTH 2A0604 & 2A0604-DF ARE SUPPLIED WITH AMBER LENS.
ORDER 2A0607-E FOR A CLEAR PLASTIC LENS; 2A0607-O FOR AMBER (ORANGE)PLASTIC LENS; 2A0607-EG FOR MILK GLASS LENS.*= 2-1/4" OD **= 2-3/4" OD += 2-13/16" OD ++= 3-1/2" ODB/O=BLACKOUT T/O=TAKEOUT PKG=PARKING LIGHT
GROUP 06: ELECTRICAL
B0675-6B0675-12
B0676-6B0676-12
B0677-6B0677-12
B0670-6B0670-12C0670-24
C0675-6C0675-12C0675-24
B0613-6RBULBB0613-12RBULBB0613-24RBULB
B0669-6
B0669-12
C0669-24
C
# ALL FUEL GAUGES & SENDERS MUST MATCH OHMS & BE PROPERLY GROUNDED OTHERWISE THEY WILL NOT WORK. IF NEEDED, PLEASE ASK FOR HELP WHEN ORDERING!
WWII EARLY FACE WITH TRIP ODOMETER B0626-E B0626-E ---- ---- ---- ---- ---- ---- ----WWII LATE FACE WITH TRIP ODOMETER B0626-L B0626-L ---- ---- ---- ---- ---- ---- ----POST-WAR WITHOUT TRIP ODOMETER C0626 C0626 2A0626 2A0626 C0626 2A0626* ---- ---- C0626POST-WAR WITHOUT TRIP ODOMETER T/O C0626-T C0626-T C0626-T C0626-T C0626-T C0626-T* ---- ---- C0626-TGAUGE CLUSTER, LARGE CIVILIAN STYLE (SPEEDO & GAUGES IN ONE) ---- ---- ---- 5E0626* 5E0626* 5E0626* ----CABLE, SPEEDOMETER B0627 B0627 B0627 B0627 C0627 B0627 B0627 B0627 C0627TRANSFERCASE NUT FOR SPEEDOCABLE B0832-NUT B0832-NUT B0832-NUT B0832-NUT C0832-NUT B0832-NUT B0832-NUT B0832-NUT C0832-NUTGEAR, SPEEDOMETER (DRIVEN) B0832 B0832 2A0832 2A0832 C0832 2A0832 2A0832 2A0832 C0832
*LATE 1960'S CJ3B'S USED THE SINGLE LARGE CJ5 STYLE 5E0626 SPEEDOMETER/INSTRUMENT CLUSTER WHICH INCLUDES ALL ACCESSORY GAUGES INSIDE OF SPEEDOMETER UNIT. EARLY 1950'S CJ3B'S USED SEPARATE SPEEDOMETER AND DASH GAUGES. SEE GROUP 8 FOR TRANSFER CASE SPEED DRIVE GEARS.
B0626-E (WWII) B0626-L (WWII) 2A0626 (CIVILIAN) (ALL SPEEDOMETERS ARE INTERCHANGEABLE WITH EACH OTHER EXCEPT 5E0626)
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 21C
SIGNAL UNIT & LICENSE PLATE LIGHTS & BULBS VEHICLE DESCRIPTION ORDER NO. RPV 6V 12V 24V
ALL VEHICLES (FOR LICENSE PLATE) LIGHTED PLATE BRACKET B2114~ 1 B0670-6 B0670-12 C0670-24(6), (12), OR (24) VOLT VEHICLES STG COL SIGNAL UNIT B0680~ 1 B0669-6 B0669-12 C0669-24(24) VOLT VEHICLES STG COL SIGNAL UNIT E0680-KIT 1 ---- ---- C0669-24
UNLESS NOTED, HEADLIGHT BUCKETS (SHELLS), TAIL & DASH LIGHTS ARE SUPPLIED WITHOUT BULBS. YOU MUST ORDER THEM SEPARATELY* THIS IS AN ECONOMICAL REPLACEMENT FOR THE LESS SAFE ORIGINAL STYLE TAIL LIGHTS. IT HAS A BLACK METAL HOUSING AND FULL RED PLASTIC LENS. IT IS
SUPPLIED WITH A (12) VOLT BULB. SEE APPROPRIATE (6) OR (24) VOLT BULBS IF YOU WANT TO CHANGE THE VOLTAGE.** THESE ARE REPRODUCTIONS OF THE EARLY STYLE TAIL LIGHTS. THEY HAVE BLACK METAL HOUSINGS WITH CHROME RING AND RED LENS.
***THESE ARE SUPPLIED WITH (6V) BULBS. ORDER ALTERNATE VOLTAGE BULBS IF YOU WANT TO CHANGE THE VOLTAGE.~ THESE ARE SUPPLIED WITH (12V) BULBS. ORDER ALTERNATE VOLTAGE BULBS IF YOU WANT TO CHANGE THE VOLTAGE.^ THESE ARE SUPPLIED WITH (24V) BULBS. ORDER ALTERNATE VOLTAGE BULBS IF YOU WANT TO CHANGE THE VOLTAGE.
@ CAN ALSO BE SET UP FOR TURN SIGNALS * NOS MEANS AN ORIGINAL MANUFACTURE UNUSED PART *TAKEOUT MEANS A GOOD USED ORIGINAL MANUFACTURE PART
GROUP 06: ELECTRICAL
ORDER BULB NUMBER ORDER NUMBER TRIM RING
VEHICLE DESCRIPTION NO. RPV 6V 12V 24V ORDER NO.
HEADLIGHTS & BULBS
MB GPW HEAD LIGHT SHELL (BUCKET) B0662-B 2 B0603-6 B0603-12 ---- ----MB GPW HEADLIGHT HINGE DRIVER SIDE B0663-H 1 ---- ---- ---- ----MB GPW HEADLIGHT HINGE PASS SIDE B0662-H 1 ---- ---- ---- ----
M38 M38A1 M170 M151 ADAPTOR TO DOUGLASS FEMALE BAYONETTE V ----- ----- C0601-PM-DFM38 M38A1 M170 M151 ADAPTOR TO DOUGLASS MALE BAYONETTE 1 ----- ----- C0601-PM-DM
MB GPW CJ2A CJ3A; EARLY CJ3B* ORIGINAL OIL GAUGE STEEL LINE ALONG FIREWALL 1 B0631-LINE B0631-LINE B0631-LINEMB GPW CJ2A CJ3A; EARLY CJ3B* HOSE FROM BLOCK TO B0631-LINE 1 B0135-O B0135-O B0135-O
E or C0631-24E or C0631-24T
E or C0630-24E or C0630-24NE or C0630-24T
E or C0629-24E or C0629-24T
C0601-PM-DF(FEMALE BAYO-
NETTE)
C0601-PM-DM(MALE
BAYONETTE)
# ALL FUEL GAUGES & SENDERS MUST MATCH OHMS & BE PROPERLY GROUNDED OTHERWISE THEY WILL NOT WORK. IF NEEDED, PLEASE ASK FOR HELP WHEN ORDERING!
VEHICLE DESCRIPTION ORDER NO. RPV 6V 12V DOUGLASS PACKARD
* MB, GPW & CJ2A HAD A THREADED SHIFTER CANE B0726 THAT ACCEPTED A SMALL 1" DIAMETER SHIFT KNOB, THE SAME AS USED ON THE TRANSFER CASE SHIFT LEVERS (B0715). THE C0715 KNOB IS A NON-THREADED LARGE MUSHROOM SHAPED KNOB THAT PRESSES ONTO A
NON-THREADED SHIFTER CANE C0727. 3A0715 IS A LARGE THREADED MUSHROOM SHAPE KNOB THAT THREADS ONTO THREADED SHIFTER CANE B0727 OR 2A0727. THREADED KNOBS B0715 & 3A0715 ARE INTERCHANGEABLE.
^ EARLY CJ2A TO S/N 38221 USED SIDE SHIFT T-90 FOR COLUMN SHIFT ARRANGEMENTS.^^ SOME T-84 TRANSMISSIONS WERE FORD GPW MARKED, HARD TO FIND & SPECIAL ORDER. UNLESS SPECIFIED, YOU WILL RECEIVE A WILLY'S T-84.
~ LATE 1949 CJ2AS USED A CJ3A STYLE CROSSMEMBER 3A0701-CM.~~ B0703-L WAS ONLY USED ON SOME, BUT NOT ALL LATE 1945 MB AND GPW T-84 TRANSMISSIONS.
# USED ON CJ2A T-90 TRANSMISSIONS AFTER S/N 24196 AND ALL T-90S THEREAFTER.+ 2 BLOCKING RINGS REQUIRED PER VEHICLE. B0723-BR IS INCLUDED IN B0723. 2A0723-BR IS INCLUDED IN 2A0723.
++ INCLUDES SHIFTER CANE 2A0726 & INTERNAL CANE COMPONENTS IN CAST COVER.@ B0131-MK INCLUDES (1) B0714, (2) B0131, & (1) B0811.
UNLESS NOTED, ALL LISTINGS ABOVE ARE FOR THE T-84 (3) SPEED TOP SHIFT MB & GPW TRANSMISSION & THE CJ2A,CJ3A, CJ3B, CJ5,CJ6, M38, M38A1, & M170 T-90 3 SPEED TOP SHIFT TRANSMISSIONS WITH (4) CYLINDER ENGINES.
ORDER ONE ORDER NUMBER PER TRANSMISSION, UNLESS "RPV" IS OTHERWISE IS NOTED **= 13RPV; ***=14RPV;****=4 RPV; *****=88
GROUP 07: TRANSMISSION
B0725
B0704
B0728
B0714
B0702
B0706B0708 B0716
B0710
B0731
B0732B0733
B0734B0709
B0729
B0712
B0707B0730
B0715
B0715-RDG
B0705
B0735B0729
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
+B0823 WAS USED ON ALL MB'S AND GPW'S. IT HAS A 1-1/4" DIAMETER CENTER HOLE WITH 23 STRAIGHT& 33 SLANTED EXTERNAL TEETH . IT ALSO USES SHAFT B0827 (3/4" DIAMETER), TWO B0826 BEARINGS ASSEMBLIES AND TWO B0825 THRUST WASHERS.
++2A0801-E-R, B0830 & 2A0823-E WAS USED ON EARLY CJ2A'S UP TO S/N 24196. 2A0823-E HAS A 1-1/4" DIAMETER CENTER HOLE WITH 21 STRAIGHT& 34 SLANTED EXTERNAL TEETH & USES SHAFT B0827 (3/4" DIAMETER), TWO B0826 BEARINGS AND TWO B0825 THRUST WASHERS.
+++2A0801-R, 2A0830 & 2A0823 WAS USED ON CJ2A AFTER S/N 24196, ON CJ3B UP TO S/N 54-12506, AND ALL CJ3A, M38, M38A1 & M170. 2A0823 HAS AN 1-5/8" DIAMETER CENTER HOLE WITH 21 STRAIGHT & 34 SLANTED EXTERNAL TEETH.
IT ALSO USES SHAFT 2A0827 (1-1/8" DIAMETER), TWO 2A0826 BEARINGS AND TWO 2A0825 THRUST WASHERS.~3B0801-R, 3B0830 & 3B0823 WAS USED ON CJ3B AFTER S/N 54-12506, ON CJ3B AND ALL CJ5 AND CJ6. 3B0823 HAS AN 1-5/8" DIAMETER CENTER
HOLE WITH 18 STRAIGHT & 39 SLANTED EXTERNAL TEETH & ALSO USES SHAFT 3B0827 (1-1/4" DIAMETER), TWO 3B0826 BEARINGS & TWO 3B0825 THRUST WASHERS. (3B0826 IS A LOOSE BEARING SET USING 24 INDIVIDUAL ROLLERS; RPV=48 ROLLERS OR 2 BEARING SETS).
~~ B0832 HAS 14 TEETH. 2A0832 HAS 15 TEETH. B0832 & 2A0832 USE B0627. C0832 HAS 15 TEETH & AND USES C0627.^^B0715 HAS A SLIGHT MOLD MARK AROUND THE EQUATOR. B0715-RDG HAS ONE THAT IS MORE PRONOUNCED. BOTH ARE INTERCHANGEABLE.
@ B0131-MK INCLUDES (1) B0714, (2) B0131, & (1) B0811. ** 2 REQUIRED PER VEHICLE
MODEL 18 -USED ON CJ2A,CJ3A,CJ3B,CJ5,CJ6,475,FORWARD CONTROL JEEPS,MB,M38,M38A1,M170, 4 CYLINDER OR EARLY V6;
ALSO USED WITH EARLY CJ3B,CJ5,CJ6 WITH T-90 3 SPEED OR SOME T-98 4 SPEED MANUAL TRANSMISSION
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 26C
GROUP 10: MODEL 25 FRONT AXLE
COVER, AXLE DIFFERENTIAL B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~GASKET, DIFF. COVER B1035 (25 & 27) B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~PLUG, VENT AXLE HOUSING COVER B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENTBEARING, CONE DIFF. CARRIER SIDE B1005 B1005 B1005 B1005 B1005 B1005 B1005 B1005 B1005BEARING, CUP DIFF. CARRIER SIDE B1006 B1006 B1006 B1006 B1006 B1006 B1006 B1006 B1006GEAR & PINION RING 4:88 RATIO B1008-488^ B1008-488^ ---- ---- ---- ---- ---- ---- ----GEAR & PINION RING 5:38 RATIO ---- ---- B1008-538^ B1008-538^ B1008-538^ B1008-538^ B1008-538^ B1008-538^ B1008-538^GEAR SET, SPIDER DIFF. (25 & 27) B1009 B1009 B1009 B1009 B1009 B1009 B1009 B1009 B1009WASHER, THRUSTBEVELGEAR DIF(25&27) B1007 B1007 B1007 B1007 B1007 B1007 B1007 B1007 B1007WASHER,THRUST SIDEGEAR DIF(25 &27) B1045 B1045 B1045 B1045 B1045 B1045 B1045 B1045 B1045SHIM KIT, DIFF. CARRIER (25,27&30) B1011 B1011 B1011 B1011 B1011 B1011 B1011 B1011 B1011LOCK STRAP, RING GEAR BOLT B1029 B1029 B1029 B1029 B1029 B1029 B1029 B1029 B1029BEARING, CONE PINION INNER (25 & 44) B1013 B1013 B1013 B1013 B1013 B1013 B1013 B1013 B1013 BEARING, CUP PINION INNER (25 & 27) B1014 B1014 B1014 B1014 B1014 B1014 B1014 B1014 B1014BEARING, CONE PINION OUTER B1015 B1015 B1015 B1015 B1015 B1015 B1015 B1015 B1015BEARING, CUP PINION OUTER B1016 B1016 B1016 B1016 B1016 B1016 B1016 B1016 B1016SHAFT, (PIN) PINION DIFF.GEAR (25 & 27) B1010 B1010 B1010 B1010 B1010 B1010 B1010 B1010 B1010 SEAL, OIL; PINION SHAFT B1017 B1017 B1017 B1017 B1017 B1017 B1017 B1017 B1017GASKET, OIL SEAL PINION PINION SHAFT B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-GSHIM KIT, PINION (25 & 44) B1018 B1018 B1018 B1018 B1018 B1018 B1018 B1018 B1018NUT, PINION SHAFT THREAD B1019 B1019 B1019 B1019 B1019 B1019 B1019 B1019 B1019YOKE & SHIELD FOR PINION FRONT AXLE B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-FYOKE & SHIELD FOR PINION REAR AXLE B0807-F B0807-F B0807-F B0807-F B0807-F 3B1120 3B1120 3B1120 B0807-FSLINGER, PINION (YOKE) B1030 B1030 B1030 B1030 B1030 B1030 B1030 B1030 B1030PIN, PINION SHAFT SET (25 & 27) B1034 B1034 B1034 B1034 B1034 B1034 B1034 B1034 B1034SHAFT, AXLE FRONT RIGHT BENDIX STYLE@ B1022-R-BX B1022-R-BX B1022-R-BX B1022-R-BX ---(Shaft has spline & threaded at end towards B1043 fl ange) ---SHAFT, AXLE FRONT RIGHT RZEPPA STYLE@ B1022-R-RZ B1022-R-RZ B1022-R-RZ B1022-R-RZ ---(Shaft has spline & threaded at end towards B1043 fl ange) --- SHAFT, AXLE FRONT RIGHT TRACTA STYLE@ B1022-R-TC B1022-R-TC B1022-R-TC B1022-R-TC ---(Shaft has spline & threaded at end towards B1043 fl ange) ---SHAFT, AXLE FRONT RIGHT SPICER STYLE@ B1022-R-SP B1022-R-SP B1022-R-SP B1022-R-SP ---(Shaft has spline & threaded at end towards B1043 fl ange) ---SHAFT, AXLE FRONT LEFT BENDIX STYLE@ B1022-L-BX B1022-L-BX B1022-L-BX B1022-L-BX ---(Shaft has spline & threaded at end towards B1043 fl ange) ---SHAFT, AXLE FRONT LEFT RZEPPA STYLE@ B1022-L-RZ B1022-L-RZ B1022-L-RZ B1022-L-RZ ---(Shaft has spline & threaded at end towards B1043 fl ange) --- SHAFT, AXLE FRONT LEFT TRACTA STYLE@ B1022-L-TC B1022-L-TC B1022-L-TC B1022-L-TC ---(Shaft has spline & threaded at end towards B1043 fl ange) ---SHAFT, AXLE FRONT LEFT SPICER STYLE@ B1022-L-SP B1022-L-SP B1022-L-SP B1022-L-SP ---(Shaft has spline & threaded at end towards B1043 fl ange) ---NUT, FRONT AXLE SHAFT THREAD B1019 B1019 B1019 B1019 ---- ---- ---- ---- ----SHAFT, AXLE FRONT RIGHT BENDIX STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-BX 3B1022-R-BX 3B1022-R-BX 3B1022-R-BX 3B1022-R-BX SHAFT, AXLE FRONT RIGHT RZEPPA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-RZ 3B1022-R-RZ 3B1022-R-RZ 3B1022-R-RZ 3B1022-R-RZ SHAFT, AXLE FRONT RIGHT TRACTA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-TC 3B1022-R-TC 3B1022-R-TC 3B1022-R-TC 3B1022-R-TC SHAFT, AXLE FRONT RIGHT SPICER STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-SP 3B1022-R-SP 3B1022-R-SP 3B1022-R-SP 3B1022-R-SP SHAFT, AXLE FRONT LEFT BENDIX STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-BX 3B1022-L-BX 3B1022-L-BX 3B1022-L-BX 3B1022-L-BX SHAFT, AXLE FRONT LEFT RZEPPA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-RZ 3B1022-L-RZ 3B1022-L-RZ 3B1022-L-RZ 3B1022-L-RZ SHAFT, AXLE FRONT LEFT TRACTA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-TC 3B1022-L-TC 3B1022-L-TC 3B1022-L-TC 3B1022-L-TC SHAFT, AXLE FRONT LEFT SPICER STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-SP 3B1022-L-SP 3B1022-L-SP 3B1022-L-SP 3B1022-L-SP SEAL, AXLE SHAFT INNER HSG (25 & 27) B1021 B1021 B1021 B1021 B1021 B1021 B1021 B1021 B1021SEAL KIT, STEERING KNUCKLE 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023 CAP, KING PIN BEARING UPPER ---- ---- B1024 B1024 B1024 B1024 B1024 B1024 B1024CAP, KING PIN BEARING LOWER B1024 B1024 B1024 B1024 B1024 B1024 B1024 B1024 B1024STUD, KING PIN BEARING CAP (16 RPV) B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2NUT, KING PIN BEARING STUD (16 RPV) B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUTWASHER, KING PIN BRG STUD (16 RPV) B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LWSHIM KIT, KING PIN BEARING B1027 B1027 B1027 B1027 B1027 B1027 B1027 B1027 B1027BEARING, CONE KING PIN B1025 B1025 B1025 B1025 B1025 B1025 B1025 B1025 B1025BEARING, CUP KING PIN B1026 B1026 B1026 B1026 B1026 B1026 B1026 B1026 B1026HUBS, LOCKOUT B1028 B1028 B1028 B1028 B1028 B1028 B1028 B1028 B1028SPINDLE ASS’Y, WHEEL BEARING B1032 B1032 B1032 B1032 B1032 B1032 B1032 B1032 B1032BUSHING, SPINDLE B1031 B1031 B1031 B1031 C1031 C1031 C1031 C1031 C1031WASHER, AXLE THRUST LOOSE(2-1/4"OD) B1038 B1038 B1038 B1038 C1038 C1038 C1038 C1038 C1038SEAL, FRONT AXLE HUB B1339 (2-7/8"DIA)** B1332 B1332 B1332 B1332 B1332 B1332 B1332 B1332 B1332SEAL, FRONT AXLE HUB FOR LATE 3B1339 (3" DIA) ---- ---- ---- ---- ---- 3B1332 3B1332 3B1332 ----HUB, FRONT AXLE (NO DRUM)** B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339HUB, FRONT AXLE LATE LEFT LATE (NO DRUM) ---- ---- ---- ---- ---- 3B1339-L 3B1339-L 3B1339-L ----HUB, FRONT AXLE LATE RIGHTLATE (NO DRUM) ---- ---- ---- ---- ---- 3B1339-R 3B1339-R 3B1339-R ----FLANGE, 6-BOLT AXLE DRIVE (SPLINED) B1043 B1043 B1043 B1043 B1043 B1043 B1043 B1043 B1043 GASKET, HUB TO B1043 CAP(SNOWFLAKE) B1040 B1040 B1040 B1040 B1040 B1040 B1040 B1040 B1040CAP, HUB DUST FRONT (LIKE A DERBY) B1327 B1327 B1327 B1327 B1327 B1327 B1327 B1327 B1327SEAL, AXLE SHAFT IN OUTER AXLE HSG B1037-S~ B1037-S~ ---- ---- ---- ---- ---- ---- ----GASKET, STG KNUCKLE TO BACK'G PLATE B1041 B1041 B1041 B1041 B1041 B1041 B1041 B1041 B1041CLAMP KIT, BRAKE LINE TO AXLE TUBES B1047 B1047 B1047 B1047 B1047 B1047 B1047 B1047 B1047
(25)= MODEL 25 FRONT AXLE FOR MB, GPW, CJ2A, CJ3A; CJ3B, CJ5, & CJ6 UP TO 1965 (27)= MODEL 25AF CJ3B, CJ5, & CJ6 AFTER 1965~ ONLY FOUND IN SOME BUT NOT ALL VERY LATE MB OR GPW MODEL 25 FRONT AXLE HOUSINGS. (MOSTLY USED ON GPW'S)
~~ MB, GPW & CJ2A UP TO S/N 13453 USED(2) B1035, (1) FOR EACH AXLE. AFTER CJ2A S/N 13453 & ALL OTHER VEHICLES, ONLY (1) B1035 WAS USED FOR FRONT AXLE.^ MB/GPW USED 4:88 GEARING WHILE CJ2A, CJ3A, CJ3B, CJ5, CJ6, M38, M38A1 & M170 USED 5:38 GEARING. THESE DIFFERENTIAL GEARS ARE INTERCHANGABLE
BETWEEN ALL FRONT & SOME REAR AXLE HOUSINGS, HOWEVER YOU MUST MATCH FRONT AXLE TO REAR AXLE GEAR RATIOS ON FRONT & REAR AXLES@ALL FRONT AXLE SHAFTS OF ANY MAKE ARE INTERCHANGEABLE WITH EACH OTHER. THEY CAN BE MIXED AND MATCHED. (See Chart On Page 27)
**B1339 & B1332 WERE THE MOST COMMON APPLICATIONS FOR FULL FLOAT AXLES. 3B1332 & 3B1339 SHOWED UP AS REPLACEMENTS.
GROUP 10: FRONT AXLE
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
^(25)= MODEL 25 FULL FLOAT AXLE (MB/GPW WITH 4:88 RING & PINION, EARLY CJ2A BEFORE S/N 13453 WITH 5:38 RING & PINION)
^^(41)= MODEL 41 SEMI-FLOAT REAR AXLE (LATE CJ2A AFTER S/N 13453, EARLY CJ3A UP TO S/N 62488)
(44)= MODEL 44 SEMI-FLOAT REAR AXLE (LATE CJ3A AFTER S/N 62488, CJ5, CJ6, M38, M38A1, M170)
**B1339 & B1332 WERE THE MOST COMMON ORIGINAL APPLICATIONS FOR FULL FLOAT AXLES.
LARGER SEAL (3" DIA) 3B1332 & HUB 3B1339 LATER SHOWED UP AS REPLACEMENTS, SEE GROUP 13 WHEELS & HUBS.
* CJ3B UP TO S/N 57348-33148, CJ5 UP TO S/N 57548-43843, CJ6 UP TO S/N 57748-11871 USED SEMI FLOAT AXLE SHAFTS 2A1122-L & 2A1122-R.AFTER THESE SERIAL NUMBERS, USE 3B1122-L & 3B1122-R.
GROUP 11: REAR AXLE
DANA 25FULL FLOATING REAR AXLE
MB, GPW & EARLY CJ2A UP TOSERIAL NUMBER 13453
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
REQUIREMENTS PER VEHICLE: If no * after part number description RPV=1; **=2 rpv; ***=4 rpv; ****=6RPV; *****=8 RPV> CJ2A AFTER 215649 USES 3A1203 & 3A1203-EB. >> LATE 1945 MB/GPW USED B1216-L.
+ CJ2A UP TO S/N 183498 USED B1218. B1218 IS A CABLE WITH A BALL END ON IT. IF YOU NEED A CABLE WITH A SOCKET END SEE 2A1218.^ LATE CJ2A AFTER 215649 USED 3A1221 (647592). BEFORE 215649 USED B1221 (A-1354)
^^ EARLY CJ2A (UP TO 13453) WITH FULL FLOAT REAR AXLE USES B1339 & B1332. FOR ALL SEMI-FLOAT REAR AXLES USE C1340.B1339 & B1332 ARE THE MOST COMMON FOR FRONT AXLE APPLICATIONS, & MOST COMMON FOR MB GPW CJ2A FULL FLOAT REAR AXLE APPLICATIONS.
~ EARLY CJ3B'S, CJ5'S & CJ6'S USED C1204 & C1205. LATE VERSIONS OF THESE VEHICLES USED 3B1204-L, 3B1204-R, 3B1205-L & 3B1205-R.~~ ONLY USED ON 1943-45 MB/GPW WITH CIVILIAN STYLE INTERNAL EXPANDING EMERGENCY BRAKE SHOES LIKE ON CIVILIAN JEEPS.
100.
99.
98
B1227-SP
GROUP 12: BRAKESEARLY EXTERNAL CONTRACTING
EMERGENCY BRAKE ARRANGEMENT SHOWN MB & GPW BRAKE SYSTEM
^(25)= MODEL 25 FULL FLOAT AXLE (MB/GPW WITH 4:88 RING & PINION, EARLY CJ2A BEFORE S/N 13453 WITH 5:38 RING & PINION)^(41)= MODEL 41 SEMI-FLOAT REAR AXLE (LATE CJ2A AFTER S/N 13453, EARLY CJ3A UP TO S/N 62488)
(44)= MODEL 44 SEMI-FLOAT REAR AXLE (LATE CJ3A AFTER S/N 62488, CJ5, CJ6, M38, M38A1, M170) B1339 & B1332 WERE THE MOST COMMON APPLICATIONS FOR FULL FLOAT AXLES. 3B1332 & 3B1339 SHOWED UP AS REPLACEMENTS.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 33C
GROUP 14: STEERING
BELL CRANK FOR 7/8" SHAFT ---- ---- 2A1401-L** 2A1401-L 2A1401-L 2A1401-L 2A1401-L 2A1401-L 2A1401-LBELL CRANK FOR 3/4" SHAFT B1401 B1401 2A1401-E** ---- ---- ---- ---- ---- ----BELL CRANK FOR 1 1/8" SHAFT ---- ---- ---- ---- ---- ---- 5E1401 5E1401 ----REPAIR KIT, BELLCRANK (SHAFT) 7/8" ---- ---- 2A1402** 2A1402 2A1402 2A1402 2A1402 2A1402 2A1402REPAIR KIT, BELLCRANK (SHAFT) 3/4" B1402 B1402 B1402** ---- ---- ---- ---- ---- ----REPAIR KIT, BELLCRANK (SHAFT) 1-1/8" ---- ---- ---- ---- ---- ---- 5E1402 5E1402 ---- SOCKET, RIGHT TIE ROD; RIGHT END 11/16" B1407-R* B1407-R* B1407-R* B1407-R* ---- B1407-R* B1407-R* B1407-R* ----SOCKET, RIGHT TIE ROD; LEFT END 11/16" B1407-L* B1407-L* 2A1408~* 2A1408~* ---- 2A1408~* 2A1408~* 2A1408~* ----SOCKET, LEFT TIE ROD LEFT END 11/16" B1407-L* B1407-L* B1407-L* B1407-L* ---- B1407-L* B1407-L* B1407-L* ----SOCKET, LEFT TIE ROD RIGHT END 11/16" B1407-R* B1407-R* B1407-R* B1407-R* ---- B1407-R* B1407-R* B1407-R* ----SOCKET, RIGHT TIE ROD; RIGHT END 3/4" ---- ---- ---- ---- C1407-R ---- ---- ---- C1407-RSOCKET, RIGHT TIE ROD; LEFTFT END 3/4" ---- ---- ---- ---- C1408~ ---- ---- ---- C1408~SOCKET, LEFT TIE ROD; LEFT END 3/4" ---- ---- ---- ---- C1407-L ---- ---- ---- C1407-LSOCKET, LEFT TIE ROD; RIGHT END 3/4" ---- ---- ---- ---- C1407-R ---- ---- ---- C1407-RFELT DUST RINGS FOR TIE ROD SOCKETS ---- G1407-FELTS ---- ---- ---- ---- ---- ---- ----TIE ROD, DRIVER SIDE WITHOUT SOCKETS B1440-L B1440-L 2A1440-L 2A1440-L C1440-L 2A1440-L 2A1440-L 2A1440-L C1440-LTIE ROD, PASS SIDE WITHOUT SOCKETS B1440-R B1440-R 2A1440-R 2A1440-R C1440-R 2A1440-R 2A1440-R 2A1440-R C1440-RARM, STEERING GEAR (PITMAN) B1410 B1410 B1410 B1410 C1410 B1410 B1410 B1410 C1410BEARING, STEERING COLUMN (TOP END) B1411 B1411 B1411 B1411 B1411 B1411 B1411 B1411 B1411SHIM KIT, STEERING BOX TOP (THRUST) B1412 B1412 B1412 B1412 B1412 B1412 B1412 B1412 B1412WHEEL, STEERING BLACK PLASTIC B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^WHEEL, STEERING LATE SPOKED B1413-L+ B1413-L+ ---- ---- ---- ---- ---- ---- ----WHEEL,STEERING 2-3/8"DIA HORN BUTTON ---- ---- ---- ---- ---- ---- 5L1413^^ 5L1413^^ ----BUTTON KIT, HORN (TOP OF COLUMN) SMALL B0638 B0638 B0638 B0638 C0638 3B0638** 3B0638** 3B0638** C0638RING,BRASS HORN CONTACT STG COL B1429 B1429 B1429@ ---- ---- ---- ---- ---- ----BRUSH, HORN STEERING COLUMN SIDE B0635 B0635 B0635 ---- ---- ---- ---- ---- ---- SWITCH, HORN AT BOTTOM STG COL ---- ---- ---- ---- C0635 ---- ---- ---- C0635CAP, RUBBER HORN BUTTON FOR C0638-N ---- ---- ---- ---- C0638-C C0638-C C0638-C C0638-C C0638-CNUT FOR HORN BUTTON CAP C0638-C ---- ---- ---- ---- C0638-N C0638-N C0638-N C0638-N C0638-NBUTTON KIT, HORN FOR WHEEL 5L1413^^ ---- ---- ---- ---- ---- ---- 5L0638 5L0638 ----CLAMP, STEERING COL TO DASH BRACKET B1415 B1415 B1415 B1415 B1415 B1415 5E1415 5E1415 5E1415WELT KIT, STEERING COLUMN TO BODY B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441WASHER, STEERING COL TO FLOOR LEATHER LATE B1416-L B1416-L ---- ---- ---- ---- ---- ---- ----WASHER,STEERING COL /FLOOR RUBBER EARLY B1416-R B1416-R ---- ---- ---- ---- ---- ---- B1416-R@@WASHER,STEERING COL /FLOOR RUBBER STD ---- ---- B1416-R B1416-R B1416-R 5E1416 5E1416 5E1416 5E1416@@RETAINER, RING STG COLUMN WASHER B1424 B1424 B1424 B1424 C1424 B1424 ---- ---- ----GASKET KIT, ALL FLOOR SEALS RUBBER B1803-KT-R B1803-KT-R ----- ----- ----- ----- ----- ----- -----BEARING KIT, STG BOX TOP (THRUST) B1417 B1417 B1417 B1417 B1417 B1417 B1417 B1417 B1417 REPAIR KIT, SECTOR SHAFT & PARTS++ B1414 B1414 B1414 B1414 C1414 B1414 B1414 B1414 D1414BUSHING, SECTOR SHAFT OUTER++ B1419 B1419 B1419 B1419 C1419 B1419 B1419 B1419 C1419BUSHING, SECTOR SHAFT INNER++ B1420 B1420 B1420 B1420 C1420 B1420 B1420 B1420 C1420BEARING, CAM STG BALL (22 REQD) B1421 B1421 B1421 B1421 B1421 B1421 B1421 B1421 B1421SEAL, SECTOR SHAFT++ B1422 B1422 B1422 B1422 C1422 B1422 B1422 B1422 C1422SHAFT ONLY, SECTOR++ B1426 B1426 B1426 B1426 C1426 B1426 B1426 B1426 D1426GASKET, COVER STEERING BOX++ B1432 B1432 B1432 B1432 B1432 B1432 B1432 B1432 B1432STEERING COLUMNCOVER TUBE WITH BRUSH HOLE B1423 B1423 2A1423-E@ ----- ----- ----- ----- ----- -----STEERING COLUMNCOVER TUBE; NO BRUSH HOLE ----- ----- 2A1423 2A1423 C1423 2A1423 2A1423 2A1423 C1423STEERING COLUMN WITH (B1429) HORN RING B1425 B1425 2A1425-E@ ----- ----- ----- ----- ----- -----STEERING COLUMN WITHOUT HORN RING ----- ----- 2A1425 2A1425 C1425 2A1425 2A1425 2A1425 D1425WORM & SHAFT ONLY,STEERING COLUMN B1428 B1428 2A1428 2A1428 C1428 2A1428 2A1428 2A1428 D1428DRAG LINK ASSEMBLY B1427 B1427 2A1427~~ 3A1427 3A1427 3A1427 3A1427 3A1427 3A1427REPAIR KIT, DRAG LINK B1430 B1430 B1430 B1430 B1430 B1430 B1430 B1430 B1430
^ B1413-E IS A BLACK PLASTIC STEERING WHEEL USED ON EARLY MB & GPW & ALL EARLY CIVILIAN JEEPS. B1413-E IS FINE FOR M38 & M38A1 HOWEVER SOME M38 & M38A1 STEERING WHEELS WERE OLIVE DRAB PLASTIC.
^^ 5L1413 LARGE 2-3/8" DIA. HORN BUTTON BLACK STEERING WHEEL WAS USED FROM MID 1964 & UP. USE B1413-E & B0638 FOR EARLIER CJ5.+ B1413-L IS THE LATE WWII BARE SPOKED OLIVE DRAB RIM STEERING WHEEL FOR MB & GPW. ALSO FITS ALL OTHER JEEP STEERING COLUMNS.
++ BUSHINGS, GASKET, SEAL, & SECTOR SHAFT ARE INCLUDED IN KITS B1414, C1414, & D1414.@USED ON CJ2A JEEPS UP TO SERIAL NUMBER 178361.
* ALL JEEPS EXCEPT M38, M38A1, & M170 USED 11/16" THREADS ON TIE RODS & TIE ROD ENDS. M38, M38A1 & M170 USED 3/4" THREADS. BE CAREFUL, TIE RODS ARE INTERCHANGEABLE & MANY M38, M38A1 & M170 JEEPS ENDED UP WITH CIVILIAN TIE RODS.
** CJ2A UP TO S/N 199079 USED A 3/4" DIA. BELL CRANK SHAFT (ORDER KIT B1402) & BELL CRANK 2A1401-E. AFTER S/N 199079 CJ2A USED A 7/8" DIA. BELL CRANK SHAFT (ORDER KIT 2A1402) & BELL CRANK 2A1401-L. IF YOUR CJ2A HAS A FRONT CAPSTAN WINCH, IT MAY BE USING A SPECIAL ORDER REVERSE 3/4" PIN BELL-
CRANK, OR A 7/8" 2A1401-L & 3A1427 DRAGLINK IN ORDER TO CLEAR THE WINCH PTO.~ THIS TIE ROD END IS THE LARGE TIE ROD END WITH A SECOND HOLE IN IT FOR ADDITIONAL TIE ROD CONNECTION.~~ IF YOU HAVE A CJ2A WITH A FRONT CAPSTAN WINCH & REVERSE BELLCRANK, YOU MUST USE 3A1427 DRAGLINK.
@@ B1416-R WAS USED ON M38A1 UP THROUGH S/N 71065. AFTER THAT USE 5E1416.
RIGHT MEANS PASSENGER SIDE (RT=RIGHT) LEFT MEANS DRIVERS SIDE OF VEHICLE (LFT=LEFT)**GOOD PRACTICAL REPLACEMENT FOR C0638-C CAP, C0638-N NUT, C0638-ROD, & C0617 SWITCH ON AN M38, M38A1, OR M170.
* THESE FRAMES CAN INTERCHANGE WITH EACH OTHER WITH VARYING DEGREES OF MODIFICATION.~ ALTHOUGH DIFFERENT IN CONSTRUCTION, FUNCTIONALLY B1502 & G1502 AND B1503 & G1503 ARE INTERCHANGEABLE RESPECTIVELY.
^ CLOSE BUT NOT EXACT REPLACEMENT FOR C1504 & C1505. INCLUDES SHACKLE BRACKET & PIN. ONLY ONE PART NUMBER REQUIRED PER VEHICLE ABOVE UNLESS NOTED; **= 2RPV; ****= 4RPV NEXT TO PART NUMBER DESCRIPTION
^2A1709-E WAS FOR 1945-46 EARLY CJ2A WITH "BULLET" PARKING LIGHTS (20604 OR 2A0604-DF). 3A1709-SM WAS FOR LATER CJ3A WITH SIDE MOUNT RADIATOR (3A0501-SM). 2A1709 IS FOR LATE CJ2A AND EARLY CJ3A WITH (2A0606 & 20607) PARKING LIGHTS & BOTTOM MOUNTED RADIATORS. 2A1732 IS FOR
BOTTOM MOUNTED RADIATORS ONLY. *C1710 WAS USED ON ALL M38 JEEP GRILLS & M38A1 JEEPS UP TO SERIAL NUMBER 60406.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 37C
GROUP 18: BODY
BODY TUB ONLY,EARLY EARLY SCRIPT MARKED B1801-W G1801-F ----- ----- ----- ----- ----- ----- -----BODY TUB ONLY,STANDARD PRODUCTION B1801 G1801 2A1801 3A1801 C1801 3B1801 5E1801 6E1801 D1801BODY KIT WITH "SCRIPT" STAMPNGS B1801-W-KIT G1801-F-KIT 2A1801-W-KIT 3A1801-W-KIT ----- 3B1801-W-KIT 5E1801-W-KIT 6E1801-W-KIT -----BODY KIT; NO "SCRIPT" MARKINGS B1801-KIT G1801-KIT 2A1801-KIT 3A1801-KIT C1801-KIT 3B1801-KIT 5E1801-KIT 6E1801-KIT D1801-KIT WELT KIT, FRAME TO BODY B1540 B1540 2A1540 2A1540 2A1540 2A1540 5E1540 6E1540 5E1540PAN, FLOOR FRONT ASSY W/ BRACES B1802 B1802 2A1802 2A1802 C1802 2A1802 5E1802 5E1802 D1802COVER, DRAIN HOLE (BUTTERFLY) ----- ----- ----- ----- C1802-DHC ----- ----- ----- C1802-DHCPLATE, TRANSMISSION COVER B1803 B1803 2A1803 2A1803 C1803 2A1803 2A1803 2A1803 C1803GASKET, PLATE TRANSMISSION COVER B1803-G B1803-G ----- ----- ----- ----- ----- ----- -----GASKET KIT, FUEL TANK TO GAS WELL RUBBER B0301-FSKT B0301-FSKT ----- ----- ----- ----- ----- ----- -----GASKET KIT, FUEL TANK TO GAS WELL FELT ---- G0301-FSKT ----- ----- ----- ----- ----- ----- -----GASKET KIT, ALL OTHER FLOOR SEALS RUBBER B1803-KT-R B1803-KT-R ----- ----- ----- ----- ----- ----- -----PAN, FLOOR REAR W/ BRACES B1804 B1804 2A1804 2A1804 C1804 2A1804 5E1804 5E1804 D1804RECEPTICAL, SEAT REAR FLOOR PANEL ----- ----- 2A1804-S 2A1804-S ----- 2A1804-S 2A1804-S 2A1804-S -----PANEL, QUARTER FRONT LEFT EARLY ----- ----- B1805-L** ----- ----- ----- ----- ----- -----PANEL, QUARTER FRONT LEFT STD PRODUCTION B1805-L B1805-L 2A1805-L 2A1805-L C1805-L 2A1805-L ----- ----- -----PAD, STEP UP FRONT FENDER B1805-LS B1805-LS B1805-LS B1805-LS B1805-LS B1805-LS ----- ----- -----PANEL, QUARTER FRONT RIGHT B1805-R B1805-R 2A1805-R 2A1805-R C1805-R 2A1805-R ----- ----- -----PAD, STEP UP FRONT FENDER RIGHT B1805-RS B1805-RS B1805-RS B1805-RS B1805-RS B1805-RS ----- ----- -----PANEL, QUARTER REAR LEFT EARLY ----- ----- B1806-L** ----- ----- ----- ----- ----- -----PANEL, QUARTER REAR LEFT STD PRODUCTION B1806-L B1806-L 2A1806-L 2A1806-L C1806-L 2A1806-L ----- ----- -----PANEL, QUARTER REAR RIGHT B1806-R B1806-R 2A1806-R 2A1806-R C1806-R 2A1806-R ----- ----- -----TEMPLATE, SIDE PANEL HOLES MB/GPW B1806-TMP* B1806-TMP* B1806-TMP* B1806-TMP* B1806-TMP* B1806-TMP* ----- ----- -----TEMPLATE, SIDE PANEL HOLES M38 C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP*WHEELHOUSE, REAR LEFT B1807-L B1807-L 2A1807-L 3A1807-L 3A1807-L 3A1807-L 5E1807-L 5E1807-L 5E1807-LWHEELHOUSE, REAR RIGHT B1807-R B1807-R 2A1807-R 3A1807-R 3A1807-R 3A1807-R 5E1807-R 5E1807-R 5E1807-RPANEL, BODY REAR W/ BRACES B1808 B1808 ----- ----- ----- ----- ----- ----- -----PANEL BODY, REAR SCRIPT MARKED B1808-W G1808-F ----- ----- ----- ----- ----- ----- -----PANEL BODY, REAR SCRIPT MARKED (US MADE) ----- G1808-F-US ----- ----- ----- ----- ----- ----- -----SMALL PANEL, TAILLITE DRIVER SIDE ----- ----- 2A1808-L 2A1808-L 2A1808-L 2A1808-L 2A1808-L 2A1808-L -----SMALL PANEL, TAILLITE PASS SIDE ----- ----- 2A1808-R 2A1808-R 2A1808-R 2A1808-R 2A1808-R 2A1808-R -----BRACKET, REAR BODY PANEL TO FRAME B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKTTAIL GATE WITHOUT WILLYS STAMP ----- ----- 2A1809 2A1809 C1809 2A1809 2A1809 2A1809 -----TAIL GATE WITH WILLYS STAMP ----- ----- 2A1809-W 2A1809-W ----- 2A1809-W 2A1809-W 2A1809-W -----TAIL GATE CHAINS & HOOKS (PAIR) ----- ----- 2A1809-CHNS 2A1809-CHNS ---- 2A1809-CHNS 2A1809-CHNS 2A1809-CHNS -----WELL, GAS TANK STD. ROUND STYLE B1810 B1810 ----- ----- ----- ----- ----- ----- D1810WELL, GAS TANK EARLY SQUARE STYLE B1810-E B1810-E ----- ----- ----- ----- ----- ----- -----CAP, GAS TANK WELL END (2 RPV) B1810-CAP B1810-CAP ----- ----- ----- ----- ----- ----- B1810-CAPFRAME, SEAT DRVR FOR STD GAS TANK B1811~ B1811~ 2A1811~ 3A1811~ C1811-N~ 3A1811~ ----- ----- D1811-N~FRAME ,SEAT DRVR FOR B0301-EH TANK B1811-E~ B1811-E~ ----- ----- ----- ----- ----- ----- -----FRAME, SEAT PASSENGER B1812~ B1812~ 2A1812~ 3A1812~ 3A1812~ 3A1812~ ----- ----- 3A1812~PAN ONLY FOR SEAT FRAME B1811 B1811-LPAN B1811-LPAN ----- ----- ----- ----- ----- ----- -----PAN ONLY FOR SEAT FRAME B1811-E B1811-EPAN B1811-EPAN ----- ----- ----- ----- ----- ----- -----FRAME, SEAT REAR B1813~ B1813~ 2A1813~ 3A1813~ C1813~ 3B1813~ 3B1813~ 3B1813~ C1813~HANDLE, GRAB CORNER BODY B1814 B1814 ----- ----- ----- ----- ----- ----- -----HANDLE, GRAB SIDE B1815 B1815 ----- ----- C1815 ----- ----- ----- -----BRACKET, AX HEAD B1816 B1816 ----- ----- B1816 ----- ----- ----- -----METAL SHEATH, AX HEAD BODY SIDE B1816-S B1816-S ----- ----- B1816-S ----- ----- ----- -----BRACKET, AX HANDLE B1817 B1817 ----- ----- B1817 ----- ----- ----- -----BRACKET, SHOVEL HEAD B1818 B1818 ----- ----- B1818 ----- ----- ----- D1818RING, RETAINER TRANS. SHIFT BOOT B0717 B0717 2A0717 2A0717 ----- 2A0717 2A0717 2A0717 -----RING, RETAINER T/C SHIFT BOOT B0817 B0817 2A0817 2A0817 2A0817 2A0817 2A0817 2A0817 2A0817RING, RETAINER SWITCH DIMMER B0617-R B0617-R B0617-R B0617-R ----- B0617-R B0617-R B0617-R -----RETAINER, RING STG COLUMN WASHER B1424 B1424 B1424 B1424 C1424 B1424 ---- ---- ----WASHER,STEERING COL /FLOOR RUBBER B1416-R B1416-R B1416-R B1416-R B1416-R B1416-R 5E1416 5E1416 5E1416WASHER, STEERING COL TO FLOOR LEATHER B1416-L B1416-L ---- ---- ---- ---- ---- ---- ----DOOR ONLY, GLOVE BOX B1819 B1819 ----- ----- C1819 ----- 5E1819 5E1819 D1819GLOVE BOX WITHOUT DOOR B1819-GBS B1819-GBS ----- ----- ----- ----- 5E1819-GBC 5E1819-GBC -----GLOVE BOX W/O DOOR, PLASTIC REPLACEMENT ----- ----- ----- ----- ----- ----- 5E1819-GBP 5E1819-GBP -----LOCK, GLOVE BOX PUSH BUTTON (KEYLESS) B1820 B1820 ----- ----- B1820 ----- 5E1820 5E1820 B1820STRIKER, GLOVE BOX DOOR LATCH B1820-S B1820-S ----- ----- ----- ----- ----- ----- -----DOOR, TOOL BOX B1821 B1821 2A1821 2A1821 C1821 2A1821 2A1821 2A1821 C1821DOOR, TOOL BOX FORD PATTERN TOP ---- G1821 ---- ---- ---- ---- ---- ---- ----LOCK, TOOL BOX WITH H700 KEYS B1822-K B1822-K ---- ---- ---- ---- ---- ---- ----DISK, TIRE COVER LATE B1825-D B1825-D ---- ---- ---- ---- ---- ---- ----FOOT, TIRE SUPPORT LATE B1825-F B1825-F ---- ---- ---- ---- ---- ---- ----BRACKET, TIRE SPARE EARLY 3 BOLT B1823-E B1823-E ---- ---- ---- ---- ---- ---- ----BRACKET, TIRE SPARE LATE 2 BOLT B1823-L B1823-L 2A1823 2A1823 C1823 2A1823 2A1823 2A1823 C1823
2A1823 C1823
B1817B1818
B1816
^ B1806-TMP IS A REAR QUARTER PANEL TEMPLATE FOR FLAT FENDER JEEPS WHICH LOCATES THE ORIGINAL MOUNTING HOLES FOR MB OR GPW BOW SETS, HANDLES, REFLECTORS, & OTHER QUARTER PANEL MOUNTED ITEMS. C1806-TMP IS THE SAME TYPE OF TEMPLATE
EXCEPT IT WOULD LOCATE M38 BOWS & BRACKETS. ~SEE PAGES 46 & 47 FOR SEAT FRAME DETAILS! **EARLY 1945 PRODUCTION CJ2A'S
* HOLE CENTERS: P/N 2A1851 (2-1/4");C1851 (2-1/8"); ALL JEEPS NOTED WITH (*) USED BOTH 2A1851 & C1851. += 14 RPV ++= 4 RPV +++= 8 RPV
** B1851-L ARE REPRODUCTIONS OF THE WWII CAST FOOTMAN LOOPS WITH 2-1/8" HOLE SPACINGS. AN ECONOMICAL REPLACEMENT IS C1851.~~ B1859-4 CAST THUMBSCREW IS A FINE THREAD INCLUDED IN KIT B1859. C1859-4 IS A COARSE THREAD INCLUDED IN KIT C1859 OR D1859.
++ THESE ARE ORIGINAL STYLE STEP BRACKETS THAT HANG DOWN & BOLT TO THE BODY & FRAME & ASSIST WITH ENTRY INTO THE VEHICLE. ORIGINALLY USED ONLY ON CJ JEEPS. WILL FIT ANY JEEP. #B1859-W & G1859 KITS INCLUDE B1857 & B1859-4-5/16 PARTS.
@ B1857 IS INCLUDED IN B1859-W WILLYS MARKED BOW & BRACKET KIT. G1857 IS INCLUDED IN G1859 FORD MARKED BOW & BRACKET KIT.@@ ALSO ORDER B1857 KIT FOR B1859. ALSO ORDER C1857 KIT FOR C1859 OR D1859.
*EARLY 1945 CJ2A USED MB SLIDE ARM ARRANGEMENT ON INNER W/S PARTS B2013,B2014 **AFTER 1975 USE 5L2003 & 5L2001.~EARLY MB & GPW USED (2) HAND WIPER ASS'Y TIED TOGETHER WITH A TANDEM CROSSBAR (B2018) SO EITHER OCCUPANT COULD
OPERATE THE WIPERS. LATER MB, GPW & CIVILIAN JEEPS USED VACUUM WIPER UNITS ON ONE OR BOTH SIDES OF THE WINDSHIELD, (ALSO SEE B2019-N, B2016-V, B2015-V & B2018-ABH).
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 40C
GROUP 21: HITCHES, BUMPERS, BUMPERETTES
HOOK, PINTLE CAST B2101-E B2101-E B2101-E B2101-E C2101 B2101-E B2101-E B2101-E C2101EYEBOLT, PINTLE HOOK (2 RPV) B2101-EB B2101-EB B2101E-B B2101-EB B2101-EB B2101-EB B2101-EB B2101-EB B2101-EBHOOK, PINTLE COMBO 1-7/8" BALL B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~HOOK, PINTLE COMBO 2" BALL B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~BAR,TOW TANDEM MILITARY(LUNNETTE) B2103 B2103 B2103 B2103^ B2103^ B2103^ B2103^ B2103^ B2103^BLOCK, TANDEM TOW BAR TO GRILL B2112 B2112 B2112 B2112^ B2112^ B2112^ B2112^ B2112^ B2112^STRAP, TANDEM TOW BAR TIEDOWN B1924 B1924 B1924 B1924^ B1924^ B1924^ B1924^ B1924^ B1924^BAR, REAR DRAW HITCH TAKEOUT B2104-T~ B2104-T~ B2104-T B2104-T B2104-T~ B2104-T B2104-T B2104-T B2104-T~BRACKET, LICENSE PLATE FRT OR REAR B2113 B2113 B2113 B2113 B2113 B2113 B2113 B2113 B2113BRACKET, LICENSE PLATE REAR W/LITE B2114 B2114 B2114 B2114 B2114 B2114 B2114 B2114 B2114PLATE, RED METAL GENERAL 1-STAR B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1PLATE, RED METAL GENERAL 2-STAR B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2PLATE, RED METAL GENERAL 3-STAR B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3PLATE, RED METAL GENERAL 4-STAR B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4PLATE, RED METAL GENERAL 5-STAR B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5PLATE COVER, RED MATERIAL GENERAL 1-STAR B2368-1 B2268-1 B2368-1 B2368-1 B2368-1 B2368-1 B2268-1 B2368-1 B2268-1PLATE COVER, RED MATERIAL GENERAL 2-STAR B2368-2 B2268-2 B2368-2 B2368-2 B2368-2 B2368-2 B2268-2 B2368-2 B2268-2PLATE COVER, RED MATERIAL GENERAL 3-STAR B2368-3 B2268-3 B2368-3 B2368-3 B2368-3 B2368-3 B2268-3 B2368-3 B2268-3PLATE COVER, RED MATERIAL GENERAL 4-STAR B2368-4 B2268-4 B2368-4 B2368-4 B2368-4 B2368-4 B2268-4 B2368-4 B2268-4PLATE COVER, RED MATERIAL GENERAL 5-STAR B2368-5 B2268-5 B2368-5 B2368-5 B2368-5 B2368-5 B2268-5 B2368-5 B2268-5GUSSET SET, FRONT BUMPER; 4 PC KIT B2107* B2107* B2107* ---- ---- ---- ---- ---- ----GUSSET, BUMPER DRIVER UPPER B2107-DU* B2107-DU* B2107-DU* ---- ---- ---- ---- ---- ----GUSSET, BUMPER DRIVER LOWER B2107-DL* B2107-DL* B2107-DL* ---- ---- ---- ---- ---- ----GUSSET, BUMPER PASSENGER UPPER B2107-PU* B2107-PU* B2107-PU* ---- ---- ---- ---- ---- ---- GUSSET, BUMPER PASSENGER LOWER B2107-PL* B2107-PL* B2107-PL* ---- ---- ---- ---- ---- ----RIVET KIT, FRONT BUMPER GUSSETS B2107-R* B2107-R* B2107-R* ---- ---- ---- ---- ---- ----BUMPERETTE, REAR B2108 B2108 B2108 B2108 B2108 B2108 B2108 B2108 B2108REENFORCEMENT, FRT BUMPER WOOD B2110 B2110 B2110* C2110 C2110 C2110 C2110 C2110 C2110BUMPER, FRONT B2111 B2111 B2111* 3A2111 3A2111 3A2111 3A2111 3A2111 3A2111PLATE, BRIDGE JEEP WEIGHT CLASS "2" (YELLOW) B2115 B2115 ---- ---- B2115 ---- ---- ---- B2115PLATE, BRIDGE TRUCK WEIGHT CLASS "3" (YELLOW) FOR ALL MID-SIZE TRUCKS......................................................................................................................B2115-3PLATE, BRIDGE TRUCK WEIGHT CLASS "4" (YELLOW) FOR ALL LARGE SIZE TRUCKS..................................................................................................................B2115-4PLATE, BRIDGE CHANGEABLE NUMBERS(OLIVE DRAB) FOR ALL SIZE TRUCKS & JEEPS (POST-WAR M-SERIES)............................................................................C2115-SD
B2101-EC2101
B2111
B0661G0661
B2107B2107-PUB2107-PL
B0131-MKB0811
MB/GPW FRAME
B1508
G1508 B1510B1509
B2107B2107-DUB2107-DL
^ B2103 WAS ORIGINALLY DESIGNED FOR MB & GPW. IT BOLTS DIRECTLY TO CJ2A FRAMES UP TO S/N 215649. IT REQUIRES MODIFICATIONS TO FIT ALL OTHER JEEPS. B2103 SECURES TO THE TO GRILL WITH B2112 & B1924.
~ B2104 WAS ORIGINALLY DESIGNED FOR CJ JEEPS BUT WILL FIT ANY MILITARY JEEP. GOOD FOR BALL HITCH TOWING.~~ THESE PINTLE HOOKS HAVE A LOWER JAW WITH A BALL HITCH. FITS ANY JEEP. GOOD FOR TOWING EITHER MILITARY OR CIVILIAN TRAILERS.
* CJ2A UP TO S/N 215649, USED B2110, B2111, B2107, & B2107-R. AFTER S/N 215649 CJ2A USED 3A2111. B2107-DU, -DL, -PU, -PL ARE ALL PART OF KIT B2107.
**ALL REPLICA ORDNANCE & GUNS LISTED HERE ARE NON-OPERATING NON-FIRING REPLICAS STRICTLY INTENDED FOR HISTORICAL ENHANCEMENT OF RESTORED ANTIQUE VEHICLES! IT IS YOUR RESPONSIBILITY TO DETERMINE THE LAWS GOVERNING THE PURCHASE
OF THESE REPLICAS WITH REGARDS TO YOUR LOCAL AND STATE LAWS!WE WILL NOT KNOWINGLY SELL ANY ABOVE LISTED ITEMS IF THEY DO NOT IN ANY WAY CONFORM TO EXISTING LAWS!!!
^ THIS IS A HIGH QUALITY GENERIC MILITARY HEATER USED ON MANY VEHICLES BUT NOT SPECIFICALLY JEEP. IT COMES WITH HOSES & CLAMPS & REQUIRES YOU TO MAKE THE BRACKETS TO MOUNT IT. USE B0696 HEATER SWITCH TO CONTROL HEATER.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 42C
Our exclusive Installation Kits are made from blackened stainless steel and brass components so they will NOT stain your cushions or covers!
GROUP 23: WILLYS MB & FORD GPW SEAT CUSHION & COVER SETS
EARLY WWII FOAM STYLE INSERT CUSHION SET
This six cushion set duplicates the fi rst cushions originally designed for MB and GPW jeeps before the rubber shortage was declared in 1942. Each cushion is double stitched as per original military design. Our exclusive “Pincore” foam inserts duplicate the original foam’s weight and density specifi cations, which prevents any bottoming on the seat pan and affords maximum riding comfort. (Do not confuse this foam with standard off the shelf, less dense, and less expensive foam commonly used in other reproduction cushion sets on the market.) You can’t feel the difference between these foam inserts and spring inserts! Seat back cushions are 1" thick and seat bottom cushions are approximately 2-1/2" thick, just like the originals. (2-1/2" thick back cushions can be made on special order.) The front and rear bottom cushions are also available with optional early zippered map case/blanket compartments (supplied by the factory up through July of 1942). The seat backs utilize properly sized early fl aps. We recommend this set for maximum comfort without sacrifi cing appearance. (1) cushion set contains six cushions to equip one jeep's (3) seat frames. This is the best ride for the best price.
MID-WWII HAIR STYLE INSERT CUSHION SET
For the exacting restorer that must have every detail authentic inside and out, this set duplicates the cushions issued for the majority of jeep production during WWII. Each cushion is double stitched as per original military design. The horse hair inserts use our exclusive genuine production sheet packed animal hair. Do not confuse this hair insert with low density post war rubberized hair commonly used in other reproduction cushion sets. Seat backs are approximately 1" thick and bottom cushions are 2-1/2" thick. These cushions look, feel, and work exactly as the originals did. The seat backs are the early fl ap design. The front and rear bottom cushions are also available with the optional early zippered map case/blanket compartments. ( Bottom cushion zippers were supplied from the factory up until approximately July 1942.)
LATE WWII SIMULATED SPRING STYLE CUSHION SET or have your
ORIGINAL SPRINGS RECOVERED
We also make a set of cushions that simulate the late 1945 spring set (B2301-45). Original springs are hard to fi nd and often impractical or uncomfortable to us. We have solved this problem by creating a cushion set that is foam fi lled but is styled like the late 1945 spring cushion set. Comfort and originality in one package! If you do have an original spring set, they can be re-stuffed with genuine animal hair and recovered with the late spring style covers. You must supply the springs and original border wires (all four; two front lowers, one rear upper and one rear lower), stripped, cleaned and painted for the best restoration results. We may be able to supply missing border wire components from time to time. We can also recover unoriginal M201 Hotchkiss jeep springs in an original U.S. military look. The original style covers have such features as fl apless front seat back covers and double stitched seams as per original specifi cations. If you wish to recover your springs yourself, you must supply the (4) border wires so we can sew them into the covers, or we can offer just the cover set without these wires.
B2301-ZEARLY WWII
1941-1942 Front & Rear BottomZippered Map Case Cushions!
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
1942-1945 STANDARD ISSUE CUSHION SET with "Flap" Attachement Upper Cushions & Non-zippered Seat Bottoms..............................................................B23011941-1942 EARLY ISSUE CUSHION SET with "Flap" Attachment Upper Cushions & Zippered Map Case Compartment Front & Rear Seat Bottoms..............B2301-Z1945 LATE ISSUE CUSHION SET with "Non-Flap" Attachment Front Upper Cushions with Non-Zippered Simulated Upper & Lower Spring Appearance .....B2301-45
REAR FENDER WELL CUSHIONS LONG (PAIR); covers both wheelhouse tops & tool box lids) ..........................Base Part Number ................B2381REAR FENDER WELL CUSHIONS SHORT (PAIR); covers both wheelhouse tops; tool box lids not covered) ............Base Part Number ................B2381-SINSTALLATION KIT (Screws & Washers) KIT for a pair of B2381 FENDER WELL CUSHIONS ................................Order Number ......................B2381-IKIT
SEAT FRONT ......................DRIVER ................UPPER .................................Base Part Number ................B2301-1SEAT FRONT ......................DRIVER ................LOWER ................................Base Part Number ................B2301-2SEAT FRONT ......................PASSENGER ........UPPER .................................Base Part Number ................B2301-1SEAT FRONT ......................PASSENGER ........LOWER ................................Base Part Number ................B2301-2SEAT REAR ........................................................UPPER .................................Base Part Number ...............B2301-5SEAT REAR .........................................................LOWER ................................Base Part Number ................B2301-6
B2301STANDARD WWII ISSUE
1942-1945 (Our Best Seller!)Non-zippered Cushions!
B2301-45LATE WWII ISSUE 1945
Simulated Spring Style Cushions!
INSTALLATION KIT (Screws & Washers) for a Complete Cushion Set (4 front & 2 rear cushions) ..............Order Number ......B2303INSTALLATION KIT (Screws & Washers) for the Front Seat Cushions Only (4 cushions) ............................Order Number ......B2303-FINSTALLATION KIT (Screws & Washers) for the Rear Seat Cushions Only (2 cushions) .............................Order Number ......B2303-R
INDIVIDUAL CUSHIONS; STANDARD ISSUE 1942-1945 (All other style cushions individually available by special quote):
See Page 54 for Crash Pads & Covers!
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 43C
GROUP 23: WILLYS MB & FORD GPW TOPS & ENCLOSURES
TRAIL RUN TM & DELUXE TM SUMMER TOPS
EARLY ZIPPERED & LATE FRAME STYLE WINTER ENCLOSURE
CONSTRUCTION & STENCILING OPTIONS FOR TOPS
FIELD EXPEDIENT TRAIL-RUN TOP ....(Economical Field Version of the Factory Top; uses the same patterns and materials with no sacrifi ce in quality)Base Part Number ................................................................................................................................................................................................B2308-X
FACTORY SPEC DELUXE TOP .. .(Accurate Deluxe Factory Version with additional re-inforcements as per the original blueprints & as issued with every WWII Jeep)Base Part Number ................................................................................................................................................................................................B2309-X
PLEASE NOTE! WHEN YOU ORDER ANY MB OR GPW TOP, PLEASE SPECIFY WHICH FASTENER YOU ARE USING ON YOUR WINDSHIELD, (B2025-A, B2025-B, OR OTHER; SEE PAGE 56),
WHETHER YOU HAVE A JERRY CAN MOUNTED ON THE REAR BODY PANEL, WHETHER YOU WANT BLACK STENCILING INSIDE THE REAR PANEL UNDER THE WINDOW & ANY WHITE
OUTSIDE CAUTION" MARKINGS. ALSO SPECIFY IF YOU HAVE AN EARLY SLAT GRILL MB WITH SERIAL NUMBER 103545 OR EARLIER THAT USES THE SHORT MA STYLE WINDSHIELD.
B2308-X B2309-X
20-LB2310-L (also see B2340-TR)
B2310-E
The TRAILRUN summer top duplicates one less detailed style of fi eld top produced during WWII. Designed for cost
effective use while maintaining overall original appearance, it is cut from the same patterns, and uses the same top quality
canvas, straps, and hardware as our Deluxe Summer Top. Some features include (2) center bow fl aps, double stitched
rear bow seam, reinforced lower rear panel and windshield facing, mil-spec black grommets, fasteners, and buckles,
issue stenciling, and window opening (not unoriginal plastic window). The DELUXE summer top is the ultimate show
winning summer top, exactly duplicating the more detailed and reinforced factory style of original WWII top! Some
features include reinforced rear bow pocket, lower rear panel, windshield facing, web reinforced rear window open-
ing (not unoriginal plastic window), (3) center bow fl aps, mil-spec black grommets, fasteners, and buckles, and issue
stenciling. No other top competes with this top’s authenticity.
The EARLY WINTER ZIPPERED ENCLOSURE duplicates the earlier original issue Winterization Field Kit WKT100
enclosure. It is the only original factory top issued for most of WWII. Access is through heavy duty zippered openings
on each side curtain. The original style trapezoidal shaped heavy weight. D.O.T. approved safety windows are sized for
metal border frame installation. NO body alteration, drilling, or additional rod or framework other than the top bows
is required to install this enclosure. This highly detailed and crafted enclosure uses a total of (247) pieces of military
black fi nished brass hardware and (63) separate canvas pattern pieces! In addition to the reinforcements described for
our Deluxe Summer Top, other features include full reinforcements and fl aps that accept side curtains, center bow re-
inforcements, rear paulin weather fl aps, heavy weight D.O.T. approved rear safety window, gas can opening fl ap, front
windshield straps, and issue stenciling. Some key side curtain canvas hardware is supplied uninstalled to account for
minor variations in your jeep body and bows, allowing you to custom fi t your jeep. Construction and material specifi ca-
tions for our LATE WINTER FRAME STYLE ENCLOSURE is identical to the early winter enclosure specifi cations
except the enclosure is designed for original WWII frame doors and curtains as introduced in late 1945. Some key side
curtain canvas hardware is supplied uninstalled to account for variations in your jeep body and bows. This is an ultimate
show winner that experts can’t tell from the original! Please supply door framework and rods cleaned and painted, or
purchase the rod and framework from us.
Any summer or winter top listed above can be stenciled with either the FORD, WILLYS, or GOVERNMENT style
markings on the inside rear panel under the window. Also available is our exclusive popular European theatre
“CAUTION: LEFT HAND DRIVE. NO SIGNALS. 40 MPH MAX” stenciled on outside of the rear panel! It's his-
toric and practical as it warns motorists about your vehicle as much then as it does now!
(Look for these options when you add your top to your cart ON-LINE!
Build your custom TOP or ENCLOSURE (in an Array of Canvas Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
For original style top bows, brackets, castings, bow thumbscrews, thumbscrew chains, & windshirld studs...... See pages 51, 52, & 56!
Straps & all other accessories are in the JEEP STRAPS & WELTS section. ON-LINE: Click on"WEB SPECIALS" Button for Red-Hot Sales!
SUMMER TOPS (will not accept side curtains or doors):
WINTER ENCLOSURES (will accept side curtains and doors):
EARLY ZIPPERED "Soft Door" WWII FACTORY ISSUED ENCLOSURE (originallysupplied in the WKT100 Winterization kit).This is the ONLY factory enclosure issued in quantity during WWII for a Jeep; NO additional hole drilling, metalwork or framework is required!Base Part Number ................................................................................................................................................................................................B2310-E
LATE FRAME DOOR WWII FACTORY ISSUED:This is the LATE factory issued enclosure in for a WWII Jeep; Additional hole drilling, metalwork and framework is required!Base Part Number ...............................................................................................................................................................................................B2340-L
LATE FRAME DOOR FIELD EXPEDIENT LATE WWII & KOREAN WAR ISSUE:This is the LATE fi eld issued enclosure in for a WWII Jeep; Additional hole drilling, metalwork and framework is requiredBase Part Number ...............................................................................................................................................................................................B2340-TR
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 44C
GROUP 23: M38 & M38A1 SEAT COVERS, CUSHIONS, TOPS, ENCLOSURES
Our TRAILRUN summer tops are the result of simplifying our original winter top patterns by eliminating non-essential
fl aps, hardware, and reinforcements required for side curtains. The top cost is reduced yet it still uses our high quality
materials, construction standards and maintains overall original appearance. Features include (2) center bow fl aps, double
stitched rear bow seam, reinforced lower rear panel, heavy weight D.O.T. approved safety window, mil-spec black hard-
ware, and issued stenciling. (TRAILRUN tops can not accept curtains and can not be converted later.) Our WINTER
ENCLOSURE exactly duplicates original issue. Features include full reinforcements and fl aps to accept side curtains,
lower rear panel and rear bow (2) center bow fl aps, and issue stenciling. We are approved and have produced these tops
for the US and Canadian governments. The door covers have original black turn fasteners around the canvas perimeter
so the cover can be removed for repair or to collapse and stow the door frame. Some key side curtain canvas hardware
supplied uninstalled to account for minor variations in your jeep body.
For original style top bows, brackets, castings, bow thumbscrews & thumbscrew chains..... See pages 51 & 56!
Straps and all other accessories are in the JEEP STRAPS & WELTS section. ON-LINE: Click on"WEB SPECIALS" Button for Red-Hot Sales!
Separate WINTER TOP, SIDE CURTAINS, OR DOORS are available through a special quote.
SEAT FRONT ......DRIVER ................UPPER .................................................Base Part Number ................2A2302-1SEAT FRONT ......DRIVER ................LOWER ................................................Base Part Number ................3A2302-2SEAT FRONT ......PASSENGER ........UPPER .................................................Base Part Number ................2A2302-1SEAT FRONT ......PASSENGER ........LOWER ................................................Base Part Number ................3A2302-2SEAT REAR ........................................UPPER .................................................Base Part Number ................C2302-5SEAT REAR .........................................LOWER ................................................Base Part Number ................C2302-6
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
INSTALLATION KIT (Screws & Washers) for a Complete Cover/Cushion Set (4 front & 2 rear covers/cushions) ........ Order Number ......C2303INSTALLATION KIT (Screws & Washers) for the Front Seat Upper Covers/Cushions Only (2 covers/cushions) .......... Order Number ......2A2303-FINSTALLATION KIT (Screws & Washers) for the Rear Seat Covers/Cushions Only (2 covers/cushions) ..................... Order Number ......C2303-RFASTENING SCREWS for the Front Seat Bottom Pans (4 required per pan; 8 required for 2 seats/pans ..................... Order Number ......B2306-S
M38 M38A1
SUMMER TOP (will not accept side curtains/doors): .............................. Base Part Number .............C2308 ................................D230WINTER TOP OR ENCLOSURE (will accept side curtains/doors) ..............Base Part Number .............C2320 ................................D2320ROD KIT FOR TOP BOW SUPPORT (SET) ....................... Order Number....................C2319-RODKIT................D2319-RODKITDOOR FRAME KIT (PAIR) .................................................. Order Number....................C2319-DOORKIT .............5E2319-DOORKITTOP BOW SET ........................................................................ Order Number....................C1858 ................................C1858INSTALLATION VIDEO TAPE (VHS) ................................ Order Number....................V-D2310 ............................V-D2310
Build your custom TOP or ENCLOSURE (in an Array of Canvas or Vinyl Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing
PLEASE NOTE YOUR SEAT FRAME SITUATION BEFORE
YOU CONTACT US:Number 1, 2, or 3or a combination?
IF YOU HAVE:
SEAT FRAMES,
SPRINGS, &
FRONT PANS
1 3
IF YOU HAVE:
SEAT FRAMES
NO SPRINGS &
NO FRONT SEAT
BOTTOM PANS
2
IF YOU HAVE:
SEAT FRAMES
WITH FRONT
SEAT BOTTOM
PANS
SEE PAGES 46 & 47 TO VERIFY THAT YOU HAVE
THE CORRECT SEAT FRAMES BEFORE ORDERING!
Our SEAT COVER SETS duplicate the original covers used with M38 & M38A1’s spring assemblies and are available in
either our exclusive olive drab canvas or factory issue style olive drab vinyl. Each cover is double stitched as per original
military design. The front seat bottom covers include original type draw strings and are ready for you to install on your
springs! At last! Complete REPLACEMENT SEAT CUSHION SETS for missing or worn out jeep seat springs are
available! These sets use our exclusive heavy density “Pincore” foam inserts, use the original style covers, prevent any
bottoming on the seat pan, and are so fi rm you can’t tell the difference between springs and foam inserts! Sets available
with or without front pans; inserts available separately. (Do not confuse this foam with off the shelf, less dense, and less
expensive foam used in common upholstery applications. Our inserts ad life to your covers. Springs tend to wear the
covers out quicker.) The rear seat covers are modifi ed to fully enclosed cushions for ease of installation. Only you will
know the secret! ORIGINAL SPRING REUPHOLSTERING with original style covers and paddings is also available.
(Please supply the springs and front seat bottom spring pans stripped, cleaned and painted for the best restoration results.
Upholstery projects are generally reserved for our slower seasons. Please schedule with us for upholstery work.)
REAR FENDER WELL CUSHIONS (PAIR); covers both wheelhouse tops ................................ ................................On-line Base Part Number Search ..... ......C2381INSTALLATION KIT (Screws & Washers) for pair of FENDER WELL CUSHIONS ...................................Order Number ....................................................B2381-IKIT
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 45C
For original top bows, brackets, castings, rods, door frames, and bow nuts, see the JEEP TOP BOWS, BRACKETS, & ACCESSORIES section of this catalog! Straps and all other accessories are in the
JEEP STRAPS & WELTS section starting on Page 54.
Our cushion sets duplicate the cushions that were originally designed for the M151 and M718 Ambulance jeeps. Each cushion is double stitched as per original military design. Our exclusive “Pincore” foam inserts prevent any bottoming and afford maximum riding comfort. Do not confuse this foam with standard off the shelf less dense and less expensive foam commonly used in other reproduction cushion sets. Rubberized curled hair inserts are available on special order. Seat back and bottom cushions are approximately 2-1/2" thick. These are the same cushions that we used to supply the U.S. government and AM General, and have such features as front seat map pockets and adjustable bottom seat snap fastener straps. Mil-spec O.D. canvas or rip-stop vinyl available.
Sometimes we can offer, but only while the supply lasts, original issue vinyl seat cushions and enclosures! Originally made for the M151A2, these can also be used on any of the M151 series jeeps. The military rip-stop vinyl is much more durable and maintenance free when compared to canvas, and is perfect for the practical user of the M151. An added enclosure bonus? All rods and frames can be included at a great price!
Although the M151’s were not issued with summer tops, we simplifi ed our original winter top patterns by eliminating non-essential fl aps, hardware, and reinforcements required for side curtains. The top cost is reduced yet incorporates our high quality materials and construction standards, and maintains overall original appearance. Features include (2) center bow fl aps, double stitched rear bow seam, reinforced lower rear panel, heavy D.O.T. approved early double or late single window, mil-spec black hardware, and issue stenciling. These tops don’t accept curtains and can’t be converted to a winter top later. Mil-spec O.D. canvas or rip-stop vinyl available.
Our winter enclosure exactly duplicates original issue. Features include full reinforcements and fl aps to accept side curtains, lower rear panel and rear bow reinforcements, heavy D.O.T. approved early double or late single window, mil-spec black fasteners, (2) center bow fl aps, and issue stenciling. We have produced these tops for the US government. The door covers have original black turn fasteners around the canvas perimeter so the cover can be removed for repair or for collapsing and stowing the door frame. Door frames and enclosure rod work can be supplied. Some key side curtain canvas hardware supplied uninstalled to account for minor variations in your jeep body and bows. Mil-spec O.D. canvas or rip-stop vinyl available.
GROUP 23: M151 & M718 SEAT COVERS, CUSHIONS, TOPS, ENCLOSURES
SEAT FRONT ......................DRIVER ................UPPER (M151 or M718) ....Base Part Number ...............E2301-1 ..................E2301-1SEAT FRONT ......................DRIVER ................LOWER (M151 or M718) ....Base Part Number ................E2301-2 ..................E2301-2
SEAT FRONT ......................PASSENGER ........UPPER (M151 or M718) .....Base Part Number ................E2301-1 ..................E2301-1SEAT FRONT ......................PASSENGER ........LOWER (M151 or M718) ....Base Part Number ................E2301-2 ..................E2301-2
SEAT REAR ........................................................UPPER .(M151 only) ...........Base Part Number ................E2301-5 ..................----------SEAT REAR .........................................................LOWER (M151 only) ...........Base Part Number ................E2301-6 ..................----------REAR FENDER WELL CUSHION (2 required) ..........LOWER(M718 only) ..........Base Part Number ................E2381 .....................EA2381-L
Build your custom TOP or ENCLOSURE (in an Array of Canvas or Vinyl Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
SUMMER TOP (will not accept side curtains or doors): .....................................................E2308 ................................EA2308
WINTER TOP OR ENCLOSURE (will accept side curtains & doors) .............................E2320, E2320-VN .............EA2320
ROD KIT FOR TOP BOW SUPPORT (SET) ...................................................................E2319-RODKIT ................EA2319-RODKIT
DOOR FRAME KIT (PAIR) ..............................................................................................E2319-DOORKIT .............E2319-DOORKIT
TOP BOW SET ....................................................................................................................E1858 ................................EA1858
M151 M718
Build your custom CUSHION SET (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Pretty much everything we talked about for the M151 series jeeps tops, enclosures, straps, and cushion sets can be said for our breath-taking M718 Ambulance series summer tops, full winter enclosures or seat cushion sets. We can produce the tops or enclosures with or without the red crosses on white backgrounds in almost any color canvas or rip-stop vinyl materials. M151 series jeep products can also be made in a multitude of colors.
MB or GPW DRIVER (LATE STYLE B1811 or EARLY STYLE B1811-E)
UPPER SHEET METAL PAN HAS (2) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP;
SEAT CUSHIONS SIT ON THE FACE OF THE PAN & ATTACH WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER BOTTOM PAN IS WELDED TO THE SEAT FRAME & HAS ACCESS HOLES FOR THE GAS TANK FILLER CAP.
B1811 IS THE LATE STYLE SEAT FRAME FOR GAS TANK B0301-LH WITH THE LARGE 4-5/8" DIAMETER FILLER NECK CAP;
B1811-E IS THE EARLY STYLE SEAT FRAME FOR GAS TANK B0301-EH WITH THE SMALL 2-7/8" DIAMETER FILLER NECK CAP.
UPPER PAN SIZE: 18" WIDE X 14" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK
CAN BE RETROFITTED OR FOUND IN ANY JEEP; SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
BEFORE YOU ORDER YOUR SEAT CUSHIONS OR COVERS, MAKE SURE THAT YOU KNOW WHAT SEAT FRAMES YOU HAVE!
UPPER SHEET METAL PAN HAS (3) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP;
SEAT CUSHIONS SIT ON THE FACE OF THE PAN & ATTACH WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER COVER/CUSHION IS DRAWSTRINGED AROUND A REMOVEABLE SHEET METAL PAN, (SOMETIMES REPLACED WITH PLYWOOD).
THE LOWER PAN BOLTS TO THREE CROSS BARS ON LOWER SEAT FRAME
SEAT HAS TWO LEGS THAT BOLT TO FLOOR IN VARYING CONFIGURATIONS
REAR OF SEAT LEANS ON & BOLTS TO FENDER WELL
CAN BE RETROFITTED OR FOUND IN ANY JEEPUPPER PAN SIZE: 18" WIDE X 18" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK
SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
(D1811-N) M38A1 DRIVERUPPER SHEET METAL PAN HAS (3) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP
UPPER SEAT CUSHION SITS ON THE FACE OF THE PAN & ATTACHES WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER COVER/CUSHION IS DRAWSTRINGED AROUND A REMOVEABLE SHEET METAL PAN, (SOMETIMES REPLACED WITH PLYWOOD).
LOWER PAN BOLTS TO THREE CROSS BARS ON LOWER SEAT FRAMESEAT HAS ONE LEG THAT BOLTS TO FLOOR WHILE THE OTHER LEG SITS ON & BOLTS TO DOORWAY OPENING
REAR OF SEAT LEANS ON & BOLTS TO FENDER WELL
CAN BE RETROFITTED OR FOUND IN ANY JEEPUPPER PAN SIZE: 18" WIDE X 18" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK
SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
(B1812) MB or GPW PASSENGERUPPER SHEET METAL PAN HAS (2) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP;
SEAT CUSHIONS SIT ON THE FACE OF THE PAN & ATTACH WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER BOTTOM PAN IS WELDED TO THE SEAT FRAME.
LEGS HAVE HINGES AND BOLT DIRECT TO FLOOR PAN;SEAT LEANS ON FENDER WELL & CAN SWIVEL FORWARD.
CAN BE RETROFITTED OR FOUND IN ANY JEEP WITHOUT THE UNDER SEAT TOOL BOX UPPER PAN SIZE: 18" WIDE X 14" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK
SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
(2A1812) CJ2A & (3A1812) CJ3A, M38 & EARLY 1950'S CJ3B PASSENGERUPPER SHEET METAL PAN HAS (3) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP
UPPER SEAT CUSHION SITS ON THE FACE OF THE PAN & ATTACHES WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER COVER/CUSHION IS DRAWSTRINGED AROUND A REMOVEABLE SHEET METAL PAN, (SOMETIMES REPLACED WITH PLYWOOD).
PAN BOLTS TO THREE CROSSBARS ON LOWER SEAT FRAMESEAT HAS TWO LEGS THAT HINGE ON TWO BRACKETS AT THE FRONT EDGE OF THE PASSENGER SIDE TOOL BOX;
SEAT LEANS ON FENDER WELL & CAN SWIVEL FORWARD.
CAN BE RETROFITTED OR FOUND IN ANY JEEP WITH THE UNDER SEAT TOOL BOXUPPER PAN SIZE: 18" WIDE X 18" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK
SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
ALL EARLY CJ5 & CJ6; LATE 1960'S CJ3B LOW BACK BUCKET SEATS
CONTOURED, MORE MODERN LOW BACK FRONT BUCKET SEATS WITH NO SEAT UPPER OR LOWER METAL PAN
SPRINGS SPAN ACROSS TUBE STEEL FRAME & ARE A NON-REMOVEABLE INTEGRAL PART OF FRAME
ORIGINAL COVERS COVERED ENTIRE FRONT SEAT UPPER PORTION; THERE IS NO UPPER SHEET METAL PAN
VISIBLE FROM THE REAR OF THE JEEP; COVERS ARE UPHOLSTERED ON WITH HOG OR "C" RINGS.
SEAT HAS APPEARANCE OF THE 1960'S LOW BACK CAR SEATS (LIKE IN A 60'S MUSTANG CONVERTIBLE).PASSENGER SEAT LEANS ON FENDER WELL & CAN SWIVEL FORWARD.
CAN BE RETROFITTED OR FOUND IN ANY JEEP
GROUP 18: FRONT SEAT FRAME SPOTTER'S GUIDE
M38(C1811-N)
also fi ts CJ3A & CJ3B
CJ2A(2A1811)
CJ3Aor CJ3B(3A1811)
also fi ts M38
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 46
Late Stylewith Large
Gas Tank Filler Hole (B1811)
C
M38A1(D1811-N)
also fi ts CJ5 & CJ6
GROUP 18: REAR SEAT FRAME SPOTTER'S GUIDE
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 47
R-100-710 AFTER MARKET FOLDING REAR SEAT
SUPPLIED FROM MANUFACTURER IN BLACK VINYL; WE CAN REUPHOLSTER IT TO MATCH YOUR FRONT SEATS
SEAT FOLDS IN HALF FOR STORAGE & MOUNTS ON BRACKETS ON SIDE OF REAR WHEELHOUSES
CAN BE MOUNTED IN CJ2A CJ3A CJ3B CJ5 CJ6 M38 M38A1 M170 & INCLUDES MOUNTING HARDWARE
*SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
** 3A1813 & 3B1813 SEAT FRAMES SUPPLY NOT ALWAYS RELIABLE, SO YOU CAN ORDER A FREE STANDING 2A1813,
OR FOLDING C1813 & RELATED HARDWARE AS A GOOD SUBSTITUTE, OR SEE 100-710-01 BELOW
SEAT BOTTOM CUSHION IS SCREWED TO THE OUTSIDE OF & COVERS THE SEAT'S LOWER PERIMETER TUBING & PAN
ORIGINAL UPPER CUSHION THICKNESS 2-1/2"; BOTTOM CUSHION THICKNESS 4"
SEAT IS FREE STANDING WITH LEGS, DOES NOT FOLD, & SNAPS INTO FLOOR RECEPTACLES
WILL FIT DIRECTLY INTO CJ3A CJ3B CJ5 CJ6 WITH 2A1804-S (2 RPV)
CAN BE RETROFITTED INTO MB GPW M38 M38A1 WITH 2A1804-S RECEPTACLES (2 RPV)UPPER SEAT OUTSIDE DIMENSIONS: 32"WIDE X 15"HIGH LOWER SEAT OUTSIDE DIMENSIONS: 32"WIDE X 14" DEEP
FRONT LOWER FRAME'S TUBING & REAR OF THE LOWER PAN HAVE HOLES DRILLED ALL AROUND THE
SEAT BOTTOM CUSHION FITS WITHIN THE SEAT FRAME OUTER TUBING
FRONT LOWER FRAME'S TUBING HAS (5) HOLES DRILLED INSIDE FOR LOWER CUSHION FLAP ATTACHMENT
ORIGINAL CUSHION THICKNESSES UPPER & LOWER WERE 2-1/2"
SEAT IS FREE STANDING WITH LEGS, DOES NOT FOLD, & SNAPS INTO FLOOR RECEPTACLES
WILL ALSO FIT DIRECTLY INTO CJ2A CJ3B CJ5 CJ6 WITH 2A1804-S (2 RPV)
CAN BE RETROFITTED IN MB GPW M38 M38A1 WITH 2A1804-S RECEPTACLES (2 RPV)UPPER SEAT OUTSIDE DIMENSIONS: 32" WIDE X 15" HIGH LOWER SEAT OUTSIDE DIMENSIONS: 32"WIDE X 14" DEEP
SEAT BOTTOM CUSHION FITS WITHIN THE SEAT FRAME OUTER TUBING
FRONT LOWER FRAME'S TUBING HAS (5) HOLES DRILLED INSIDE FOR LOWER CUSHION FLAP ATTACHMENT
ORIGINAL CUSHION THICKNESSES WERE 1" UPPER & 2-1/2" LOWER
SEAT IS FREE STANDING WITH LEGS, DOES NOT FOLD, & SNAPS INTO FLOOR RECEPTACLES
WILL ALSO FIT DIRECTLY INTO CJ3A CJ3B CJ5 CJ6 WITH 2A1804-S (2 RPV)
CAN BE RETROFITTED IN MB GPW M38 M38A1 WITH 2A1804-S RECEPTACLES (2 RPV)UPPER SEAT OUTSIDE DIMENSIONS: 32" WIDE X 6" HIGH LOWER SEAT OUTSIDE DIMENSIONS: 32" WIDE X 14" DEEP
C1813* M38 M38A1 FOLDING MILITARY STYLE
SEAT BOTTOM CUSHION FITS WITHIN THE SEAT FRAME OUTER TUBING
FRONT LOWER FRAME'S TUBING & REAR OF PAN EACH HAVE (5) HOLES DRILLED FOR CUSHION FLAP ATTACHMENT
ORIGINAL CUSHION THICKNESSES WERE 2-1/2" UPPER & 2-1`/2" LOWER
SEAT FOLDS IN HALF FOR STOWAGE & MOUNTS ON BRACKETS ON THE SIDE OF THE REAR WHEELHOUSES
CAN ALSO BE FOUND OR USED IN CJ2A CJ3A CJ3B CJ5 CJ6 WITH HARDWARE BELOWUPPER SEAT OUTSIDE DIMENSIONS: 35"WIDE X 6" HIGH LOWER SEAT OUTSIDE DIMENSIONS: 35"WIDE X14" DEEP
B1813* MB GPW FOLDING MILITARY STYLE
SEAT BOTTOM CUSHION FITS WITHIN THE SEAT FRAME OUTER TUBING
FRONT LOWER FRAME'S TUBING HAS (5) HOLES DRILLED INSIDE FOR LOWER CUSHION FLAP ATTACHMENT
ORIGINAL CUSHION THICKNESSES WERE 1" UPPER & 2-1/2" LOWER
SEAT FOLDS IN HALF FOR STOWAGE & MOUNTS ON BRACKETS ON THE SIDES OF THE REAR WHEELHOUSES
WILL ONLY FIT IN AN MB OR GPW WITH HARDWARE SHOWN BELOWUPPER SEAT OUTSIDE DIMENSIONS: 32"WIDE X 6" HIGH LOWER SEAT OUTSIDE DIMENSIONS: 32"WIDE X 14"DEEP
B1836-R (2 RPV)REAR PIVOT
Original for: MB GPW
Retrofi t: CJ2A 3A 3B 5 6 M38 M38A1
B1836-F (2 RPV)FORWARD REST
Original for: MB M38 M38A1
Retrofi t: CJ2A 3A 3B 5 6
B1833 (2 RPV)SPRING LOCK
Original for: MB GPW M38 M38A1
Retrofi t: CJ2A 3A 3B 5 6
G1836-F (2 RPV)FORWARD REST
Original for: GPW
Retrofi t: MB CJ2A 3A 3B 5 6
OR
B1826 (2 RPV)UPPER HOOK
Original for: MB GPW
Retrofi t: CJ2A 3A 3B 5 6 M38 M38A1
C1826 (2 RPV)UPPER HOOKOriginal for: M38
Retrofi t: CJ2A 3A 3B 5 6
C
C1836-R (2 RPV)REAR PIVOT
Original for: M38 M38A1
Retrofi t: MB GPW CJ2A 3A 3B 5 6
D1826 (2 RPV)UPPER HOOK
Original for: M38A1
Retrofi t: MB GPW CJ2A 3A 3B 5 6 M38
OR
OR
OR
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DRIVER ................... UPPER .....................(2-1/2" Thick) ...........................Base Part Number ...2A2302-1DRIVER ................... LOWER ....................(3" Thick) ...................................Base Part Number ...2A2302-2
PASSENGER ........... UPPER .....................(2-1/2" Thick) ...........................Base Part Number ...2A2302-1PASSENGER ........... LOWER ....................(3" Thick) ...................................Base Part Number ...2A2302-2
CJ2ACJ3A
EARLYCJ3B
2A InstallationKit
3A
2A
RE
AR
SE
AT
FR
ON
T S
EA
T Fronts Only2A2303-F
(1 Kit Required)(Screws & Washers)
Pan ScrewB2306-S
(8 Required)
DRIVER ........................ UPPER ..........................(2-1/2" Thick) .......................................................Base Part Number ........2A2302-1DRIVER ........................ LOWER .........................(3" Thick; Unoriginal roomier thickness) ..........Base Part Number ........2A2302-2DRIVER ........................ LOWER .........................(5" Thick; Original thickness) .............................Base Part Number ........3A2302-2PASSENGER ................ UPPER ..........................(2-1/2" Thick) .......................................................Base Part Number ........2A2302-1PASSENGER ................ LOWER .........................(3" Thick; Unoriginal roomier thickness) ..........Base Part Number ........2A2302-2PASSENGER ................ LOWER .........................(5" Thick; Original thickness) .............................Base Part Number ........3A2302-2
DRIVER ...................UPPER .................... (Cover Only) .............................Base Part Number ...5L2302-1DRIVER ................... LOWER ....................(Cover Only) ..............................Base Part Number ...5L2302-2
PASSENGER ........... UPPER .....................(Cover Only) ........... .................Base Part Number ...5L2302-3PASSENGER ........... LOWER ....................(Cover Only) ..............................Base Part Number ...5L2302-4
CJ5CJ6
LATECJ3B
REAR ....................... UPPER ...(6" High x 30" Wide) .................................Base Part Number ...B2301-5REAR ....................... LOWER ..(2-1/2" Thick; Fits inside of tubing) ..........Base Part Number ...B2301-6
REAR FENDER WELL CUSHIONS (Pair; 10" x 29") ..............................Base Part Number ...B2381REAR FENDER WELL CUSHIONS (Pair; 10" x 32") ..............................Base Part Number ...C2381INSTALLATION KIT (Screws & Washers) for Fender Cushions ...............Base Part Number ...B2381-IKIT
REAR ....................... UPPER ...(15" High x 30" Wide) ...............................Base Part Number ...3A2302-5REAR ....................... LOWER ..(2-1/2" Thick; Fits inside of tubing) ..........Base Part Number ...B2301-6
REAR FENDER WELL CUSHIONS (Pair; 10" x 29") ..............................Base Part Number ...B2381REAR FENDER WELL CUSHIONS (Pair; 10" x 32") ..............................Base Part Number ...C2381INSTALLATION KIT (Screws & Washers) for Fender Cushions ...............Base Part Number ...B2381-IKIT
REAR ....................... UPPER ...(15" High x 30" Wide) ...............................Base Part Number ...3A2302-5REAR ....................... LOWER ..(4" Thick; Covers perimeter of tubing) ....Base Part Number ...3B2302-6
REAR FENDER WELL CUSHIONS (Pair; 10" x 29") ..............................Base Part Number ...B2381REAR FENDER WELL CUSHIONS (Pair; 10" x 32") ..............................Base Part Number ...C2381INSTALLATION KIT (Screws & Washers) for Fender Cushions ...............Base Part Number ...B2381-IKIT
GROUP 23: CJ SERIES CIVILIAN JEEP SEAT COVERS & CUSHIONS
BEFORE ORDERING, BE CAREFUL! IDENTIFY YOUR SEAT FRAMES & YOUR SITUATION AS
SHOWN ABOVE BY USING THE
"SEAT FRAME SPOTTER'S GUIDES"ON PAGES 46 & 47
JEEPS WERE OFTEN BOUGHT FROM THE FACTORY WITH ONLY A
DRIVER'S SEAT! THE PASSENGER & REAR SEAT MAY HAVE BEEN
ADDED, EVEN BY THE WILLYS DEALERSHIP LATER ON, WITH
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 49C
ORIGINAL STYLE SEAT COVERS, INSERTS, & CUSHIONS
These covers duplicate the original CJ Series Jeep spring assembly covers and cushions, and are available in olive drab, grey, tan, or black cotton canvas or olive drab, black, red, grey, white, tan, or brown vinyl. Each cover is double stitched as per original W-O specifi cations and is ready for you to install on your springs! Springs unreplaceable or missing? Seat pans rusted out? NOT TO WORRY! Check out our CUSHION AND COVER ORDER GUIDE & SEAT FRAME SPOTTER'S GUIDES on pages 46, 47, & 48. Look for your particular situation and use the grid to fi nd the solution! Simple as that! The Spotter's guide will show you what to order to get you into a full seat cushion arrangement. We can also re-pad and recover your original seat springs. (You must supply the springs, front seat bottom spring pans stripped, cleaned and painted. For original CJ2A rear seat springs, upper and lower, or original CJ3A rear seat bottom springs, you must also supply the border wire that is sewn into the cover.)
CJ Series "TRAILRUN" HALF & FULL SUMMER TOPS or DELUXE "WINTER" HALF OR FULL ENCLOSURES
Although these jeeps were not issued with summer tops, we simplifi ed our original winter top patterns by eliminating non-essential fl aps, hardware, and reinforcements required for side curtains. The top cost is reduced yet the top still uses our high quality materials and constuction standards, and maintains overall original appearance. Features includes double stitched rear bow seam, reinforced lower rear panel, heavy weight D.O.T. approved safety window, black hardware, and issue stenciling. (NOTE: These tops don’t accept curtains and can’t be converted to a winter top later.). Our Willys-Overland design CJ series jeep enclosures conform to original dimensions and utilize original bow and rod work. These enclosures are constructed from heavy CJ grey, olive drab, tan, or black cotton canvas, and duplicate the original full and half cab options. All windows are heavy weight D.O.T. approved (on CJ2A tops, windows are sized such that original CJ2A window frames can be installed at a later date). Some key side curtain canvas hardware is supplied uninstalled allow-ing for variations in your jeep body and bows, providing for a perfect custom fi t! Use the TOP & ENCLOSURE SPOTTER'S GUIDE on page 50 to determine what you need!
MADE IN U.S.A.!NOTE: Straps and all other accesories are in the JEEP STRAPS & WELTS section.
CJ2A CJ3A CJ3B CJ5
GROUP 23: CJ SERIES CIVILIAN JEEP SEAT COVERS, TOPS, & ENCLOSURES
YOU ASKED FOR IT! And we delivered! We now offer heavy duty olive drab 18 oz. vinyl coated polyester rip-stop stor-age covers made to protect your jeep from the elements. These super duty covers are puncture, tear, ultra-violet, mildew, shrink and water resistant. Just what you need if you lack garage space. Don't confuse these with light-weight dust covers of
equivalent price on the market. These are made for an outdoor beating! Covers listed below will fi t:
NEW!
Windshield & Top Up
Order No. B2384-VCPTUWindshield & Top Down
Order No. B2384-VCP
Windshield Up
Order No. B2384-VCPWU
NEW! Storage covers for 1/4 Ton JEEP Trailers (MBT, BT3, M100, BT3-C, M416)...........BT2384-VCPAlso ask about our special production EXTRA LONG (XL) Series Storage covers
for JEEPS that reach down & touch the ground in order to protect your entire tire from UV exposure!
MILITARY Style Field Expedient "TRAILRUN" TOPS & ENCLOSURES for CJ SERIES CIVILIAN JEEPS
Whether you have a mix & match jeep or are just trying to give your beauty that militarized appearance by signing it up for active duty, we can make a top or enclosure that fi ts the bill! (Additional hole drilling, metal and framework is required)
Here are just a few examples!CJ2A Body with CJ2A Windshield & MB Top Bows .......(Summer Top) ......2A2308-MB-2A ......(Winter Enclosure) ..............2A2340-MBCJ2A Body with CJ2A Windshield & M38 Top Bows ......(Summer Top) ......2A2308-M38-2A .....(Winter Enclosure) ..............2A2340-M38
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 50C
GROUP 23: CJ SERIES CIVILIAN JEEP TOP & ENCLOSURES
NOTE: ALL TOPS & ENCLOSURES ON THIS PAGE WORK ONLY WITH ORIGINAL BOWS & RODWORK!SUMMER TOPS CAN ALSO BE QUOTED FOR HYBRID COMBINATIONS OF JEEPS & BOWS.
Build your custom TOP or ENCLOSURE (in an Array of Canvas Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DELUXE WINTER HALF TOP ENCLOSURE (Base Part Number) ...........................2A2321 .......................3A2321 .......................3B2321 .......................5E2321
(Will accept side curtains or doors; half cab only; can not be added to in order to make a full cab)
FULL CAB TRAILRUN SUMMER TOPS (1-piece & 2-piece Versions):
TRAILRUN SUMMER FULL TOP ...................................................................................2A2308 .......................3A2308 .......................3B2308 .......................5E2308
(Will not accept side curtains or doors; full cab only; does not break down to half cab)
DELUXE WINTER HALF TOP ENCLOSURE (Base Part Number) ...........................2A2320 .......................3A2320 .......................3B2320 .......................5E2320
(Will accept side curtains or doors; full cab only; does not break down to half cab)
FULL CAB DELUXE WINTER FULL CAB TO HALF CAB CONVERSION ENCLOSURES (7-piece Versions):
DELUXE WINTER HALF TOP ENCLOSURE (Base Part Number) ...........................2A2317 .......................3A2317 .......................3B2317 .......................5E2317
(Will accept side curtains or doors; breaks down from a full cab to a half cab top)
TOP BOW SET ....................................................................................................................2A1858 .......................2A1858 .......................2A1858 .......................5E1858
TOP BOW BRACKETS ......................................................................................................2A1859 .......................2A1859 .......................2A1859...........2A1859-2PR
TOP BOW STOWAGE BRACKETS (for side body stowage) ........................................2A1858-STOW .........2A1858-STOW .........2A1858-STOW .........---------
TOP BOW SUPPORT ROD KIT .......................................................................................2A2319-RODKIT .......... 3A2319-RODKIT ........... 3A2319-RODKIT 5E2319-RODKIT
FRAME DOOR KIT ............................................................................................................3A2319-DOORKIT ......... 3A2319-DOORKIT ......... 3A2319-DOORKIT 5E2319-DOORKIT
LOWER DOOR PIVOT (2 Required) ...............................................................................2A2319-8 ...................2A2319-8 ...................2A2319-8 ...................---------
UPPER DOOR PIVOT ........................................................................................................B2319-3......................3A2319-12 .................3A2319-12 .................
INSTALLATION VIDEO TAPE (VHS)...............................................................................V-2A2316 ...................V-3A2316 ...................V-3A2316 ...................V-5E2316
TOP or ENCLOSURE STYLE CJ2A CJ3A CJ3B CJ5
(2) PIECETRAILRUNSUMMER
FULLCAB TOP
(1) PIECETRAILRUNSUMMER
FULLCAB TOP
(2) PIECETRAILRUNSUMMER
HALF CAB TOP
(1) PIECETRAILRUNSUMMER
HALF CAB TOP
(7) PIECEDELUXEWINTER
HALF CAB TO FULL CAB
CONVERSIONENCLOSURE
(3) PIECEDELUXEWINTER
HALF CABENCLOSURE
JEEP is a registered trademark of the Chrysler Corporation
(4) PIECEDELUXEWINTER
HALF CABENCLOSURE
(5) PIECEDELUXEWINTER
HALF CABENCLOSURE
(6) PIECEDELUXEWINTER
HALF CABENCLOSURE
HEIGHT: 21"
AT CENTER
2A1858(SEPARATES
INTO 6 PIECES)
HEIGHT: 24"
AT CENTER
GROUP 18: TOP BOW SPOTTER'S GUIDE
M38 & M38A1 (C1858)BOWS MOUNT WITH EXTERNAL BRACKETS ON OUTSIDE OF REAR QUARTER PANELS
BOWS ARE PLACED INTO THE UP OR DOWN POSITION
BOWS ACT AS HAND RAIL IN DOWN POSITION
B0WS CAN BE FOUND OR USED ON CJ5 CJ6 WITH D1859
B0WS CAN BE USED OR FOUND RETROFITTED ON:
MB GPW CJ2A CJ3A CJ3B WITH C1859
CJ2A CJ3A CJ3B CJ5 & CJ6FORWARD BOW MOUNTS BEHIND FRONT SEATS IN SQUARE RECEPTACLES ON TOP OF THE REAR WHEELHOUSES;
REAR BOWS MOUNT TO EXTERNAL ROUND TUBES WELDED TO OUTSIDE OF REAR CORNERS OF BODY;
THE (6) PIECE BOW SET IS ASSEMBLED OR TAKEN APART FOR THE UP OR DOWN POSITION;
THE BROKEN DOWN BOWS ARE STOWED WHEN NOT IN USE ON THE CJ2A LOWER WINDSHIELD FRAME
& CJ2A REAR DRIVER'S SIDE QUARTER PANEL WITH 2A1858-STOW BRACKETS
OR ON THE TOP OF THE REAR WHEELHOUSES FOR ALL OTHER THE CJ3A CJ3B CJ5 CJ6
2A1858 B0WS WILL DIRECTLY FIT ON CJ2A CJ3A CJ3B5E1858 B0WS WILL DIRECTLY FIT ON CJ5 CJ6
2A1858 B0WS CAN BE RETROFITTED ON MB GPW M38 M38A1 WITH 2A1859
MB GPW (B2001-IO)WINDSHIELD IS (2) PIECE WITH INNER SWING OUT SPLIT PANES
INNER WINDSHIELD HAS CENTER GRAB HANDLE
PANEL BELOW INNER WINDSHIELD IS FLAT UNMARKED PLAIN STEEL
INNER WINDSHIELD SWINGS OUT WITH B2014 SLOTTED SLIDE ARMS
ORIGINAL WINDSHIELD USED EITHER B2025-A OR B2025-B WINDSHIELD STUDS
(YOU CAN SUBSTITUTE UNORIGINAL 2A2025 OR 2A2025-R WINDSHIELD STUDS)
WINDSHIELD CAN BE USED OR FOUND RETROFITTED ON CJ2A CJ3A CJ3B M38
CJ2A (2A2001-IO OR 2A2001-IOW) WINDSHIELD IS (2) PIECE WITH INNER SWING OUT SPLIT PANESINNER WINDSHIELD HAS CENTER CAM LEVER CLOSING LOCK
ORIGINAL WINDSHIELD USED 2A2025 WINDSHIELD STUDS(YOU CAN SUBSTITUTE UNORIGINAL B2025-A, B2025-B, OR 2A2025-R STUDS)
WINDSHIELD HAS "WILLYS" STAMPED IN SHEET METAL PANEL BELOW INNER PANESINNER WINSHIELD SWINGS OUT WITH 2A2014-KIT ROTATING "LOLLIPOP" SWING ARMS
WINDSHIELD CAN BE USED OR FOUND RETROFITTED ON MB GPW CJ3A CJ3B M38
CJ5 CJ6 M38A1 & M170 (5E2003)WINDSHIELD IS (1) PIECE WITH PLAIN FLAT STEEL PANEL BELOW GLASS
WINDSHIELD DOES NOT HAVE AN INNER SWING OUT GLASS FRAME
WINDSHIELD USES A "C" CHANNEL ROPE TRACK ABOVE THE GLASS FOR TOP ATTACHMENT
THIS WILL ONLY FIT M38A1 & M170, ALSO CJ5 & CJ6 UP TO 1975
D1859
C1858
FLAT ENDS
B1858ROUND ENDS
B1859, G1859, & B1859-W
C1859
2A1859
GROUP 20: WINDSHIELD FRAME SPOTTER'S GUIDE
HEIGHT: 22"
AT CENTER
HEIGHT: 22"
AT CENTER
2A2025-R
B2025-A B2025-B
2A2025
B2014
2A2014-KIT CJ3A (3A2003) & M38 (C2003)
WINDSHIELD IS (1) PIECE WITH CLOSED VENT IN CENTER IN SHEET METAL PANEL BELOW GLASS
WINDSHIELD DOES NOT HAVE AN INNER SWING OUT GLASS FRAME
WINDSHIELD USES A "C" CHANNEL ROPE TRACK ABOVE THE GLASS FOR TOP ATTACHMENT
WINDSHIELD CAN BE USED OR FOUND RETROFITTED ON MB GPW CJ2A CJ3B
CJ3B (3B2003)WINDSHIELD IS (1) PIECE WITH PLAIN FLAT STEEL PANEL BELOW GLASS
WINDSHIELD DOES NOT HAVE AN INNER SWING OUT GLASS FRAME
WINDSHIELD USES A "C" CHANNEL ROPE TRACK ABOVE THE GLASS FOR TOP ATTACHMENT
WINDSHIELD CAN BE USED OR FOUND ON MB GPW CJ2A M38
HEIGHT: 26-1/2"
AT CENTER
CCopyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 51
MB GPW (B1858)BOWS MOUNT WITH EXTERNAL BRACKETS ON OUTSIDE OF REAR QUARTER PANELS
BOWS PIVOT INTO THE UP OR DOWN POSITION
BOWS ACT AS HAND RAIL IN DOWN POSITION
B0WS CAN BE USED OR FOUND RETROFITTED ON:
CJ2A CJ3A CJ3B CJ5 CJ6 M38 M38A1 WITH B1859, G1859 or B1859-W
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 52C
GROUP 18 & 23: JEEP TOP BOWS, RODS, BRACKETS, & ACCESSORIES
We can supply top bows and brackets for most military and civilian jeeps. These bows duplicate all original dimensions and specs and are an absolute must in order for your original top to work and fi t properly. MB & GPW (B1859, G1859, or B1859-W), M38 (C1859), M38A1 (D1859) military style top bow bracket sets contain (8) pieces which include cast thumbscrews
The DOOR KIT includes (2) door frames, handles, latch plates, striker plates, & rivets necessary to add doors to your jeep. You must however, also use the ROD KIT in order to frame the jeep doorway for use with a winter enclosure. These kits supply the metal parts as per original Willys Overland specifi cations, and assume that your jeep is complete as it left the factory. (In order to install a winter enclosure, additional components may have to be ordered if they are missing from your jeep; such as windshield or body door pivot hinges).
1/4 & 1 TON TRAILER TARPS, ROPES, DATA PLATES, WIRING, & COVERS
CJ2A, CJ3A, CJ3B, CJ5, or CJ6 top bow sets 2A1858 & 5E1858 require either the SUPPORT ROD KIT listed above, or at a minimum, (1) each 2A1917-F & 2A1917-R support strap kit in order to stabilize your bows set. MB, GPW, M38 or M38A1 top bow sets (B1858 or C1858) do not require a SUPPORT ROD KIT, however, it is recommended that you either use one or make certain that your jeep's pivoting top bow rivets are TIGHT and do not allow the center bow to bow to fall or "fl op" onto the steering wheel when the bow is released. The bow should stay in the position where placed so that the bow supports the top and the top DOES NOT support the bow. See page 51 for bow descriptions.
ENCLOSURE (COVER) with integral end curtains & closure straps (Base Part Number) ..................................... BH2310-XRope Kit for BH2310-X (Base Part Number) ...................................................................................................... BH1910
Heavy duty, quality crafted, original style construction olive drab canvas trailer tarp with features such as double reinforced corners, triple reinforced edges, plated black
brass grommets, and issue stenciling. Available in canvas or durable rip-stop vinyl. Rope kits include enough pieces of mil-spec style ‘manila’ rope, cut to proper length,
with end clips; to secure one tarp. 1/4 ton trailer tarps lised here are the fl at military style that simply cover the bed opening. If you are interested in the full enclosure
covered wagon style with end curtains (as was used on the BT3-C), please call for a quote). MBT is the WWII Willys trailer, BT3 is the WWII Bantam trailer, M100 is
the Korean War trailer, M416 is the Vietnam trailer, BT3-C is the post-WWII Bantam civilian trailer with tail gate, BC is the WWII airborne Converto dump trailer.
Build your custom TRAILER TARP or COVER (in an Array of Canvas Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DOOR FRAME (PAIR) KIT SUPPORT ROD KIT
MB/GPW Late Style Winter Enclosure (B2340-L) Door & Rod Kit ............B2319-RODKIT.......................B2319-DOORKIT M38 Winter Enclosure (Base Part Number C2320) ............................................C2319-RODKIT......................3A2319-DOORKITM38A1 Winter Enclosure (Base Part Number D2320) .......................................D2319-RODKIT......................5E2319-DOORKITCJ2A Winter Enclosure (Base Part Numbers 2A2320 & 2A2321) .....................2A2319-RODKIT....................3A2319-DOORKITCJ3A Winter Enclosure (Base Part Numbers 3A2320 & 3A2321) .....................3A2319-RODKIT....................3A2319-DOORKITCJ3B Winter Enclosure (Base Part Numbers 3B2320 & 3B2321) .....................3A2319-RODKIT....................3A2319-DOORKITCJ5 Winter Enclosures (Base Part Numbers 5E2320 & 5E2321) .......................5E2319-RODKIT....................5E2319-DOORKITCJ6 Winter Enclosures (Base Part Numbers 5E2320 & 5E2321) .......................6E2319-RODKIT....................5E2319-DOORKIT
MB .............................. B1858 ..................... B1859 or B1859-W .....................B1857GPW ........................... B1858 ....................... B1859 or G1859 ........................G1857M38 or M38A1 .......... C1858 .......... (M38) C1859; (M38A1) D1859 ...........C1857M151 SERIES.............E1858 ................................. ------ .................................C1857CJ2A, CJ3A or CJ3B ... 2A1858 ............................. 2A1859 ................................ ------CJ5 or CJ6 .................5E1858 ......................... 2A1859-2PR ............................ ------
ONE TON "BEN HUR" STYLE TRAILER COVER ASSEMBLY AND ROPE KIT:Heavy duty, quality crafted, original construction trailer tarp with features such as reinforced corners, triple reinforced edges, plated black brass grommets, intergral end
fl aps, leather or web closure straps, and issue stenciling. This cover is an exact duplicate of the American Bantam/Michigan Awning cover and is the same cover we’ve supplied to the government.
FRAME DOOR, HANDLE, LATCH PLATE & SUPPORT ROD KITS
VEHICLE TOP BOW BOW BRACKET THUMBSCREW SET SET WIRES & CHAINS
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 53C
These bench pads are modeled after the original Willys-Overland approved bench pads and attach to either the passenger or driver
side rear wheel housings on CJ2A, CJ3A, CJ3B, and early CJ5 jeeps. We can produce wheelwell (rear wheelhouse or fender)
cushions to increase comfort and passenger seating in your military jeep. For added truck troop seat comfort, we also have bench
pads as originally supplied with artic winterization kits. Use order number B2381-IKIT for any cushion pair listed below. Check
your body for precence of top bow brackets on top of the rear fender well in order to determine optimum cushio size.
HYBRID JEEP SEAT COVERS & TOPSSo your 1942 Willys MB mixed with a few other vehicles in it’s lifetime and you ended up with a CJ2A windshield and M38 top bows, or a CJ3A windshield, CJ3B seat frames, and M38A1 topbows, or.......Well, believe us, we’ve seen and made patterns for almost every hardware combination you could think of! Tell us your particular arrangement and we will be glad to quote you a price for whatever you need in seat covers and enclosures.
DESERT TAN SEAT COVERS & TOPSNo more searching for the right mil-spec khaki-tan for your special desert project. Samples are awaiting your request! This coloring is similar to the early war khakis.
AHOY! NOW HEAR THIS! NAVY ENTHUSIASTS!Almost any canvas item in our catalog can now be reproduced in Navy grey colored cotton canvas! GO NAVY! Request a sample!
MIL-SPEC OLIVE DRAB VINYL SEAT COVERS & TOPSAlmost any canvas item in our catalog can be reproduced in heavy weight mil-spec reinforced rip-stop vinyl, as used on later military vehicles. Not only is this material water, mildew, rot, and shrink resistant but it also has an integral tear resistant rip-stop mesh. Coloring matches WWII spec olive drab. Best buy for your dollar if you use your vehicle more than you show it! Many other colors also available. Ask for sample today!
THE OLIVE DRAB BLUESAll canvas or vinyl seat covers and tops listed in this catalog fol-low original color and material specs as close as possible. We are, however, able to provide these same covers on special order in unoriginal color or material schemes, at nominal additional costs, if you have a special project in mind. Tell us your ideas and we can provide quotes and samples. Our inventory of colored cotton canvas includes OD, grey, black, & tan.
FIG. 1
FIG. 2
AUXILIARY BENCH PADS (REAR WHEEL HOUSE CUSHIONS)Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com Otherwise please e-mail, fax or call us for current pricing!
THE BEACHWOOD CANVAS CARGO TARP DIFFERENCEHere is the BEACHWOOD DIFFERENCE in our cargo bed tarp construction that outshines our competitors and even exceeds the military’s specifi cations! Figure No. 1 depicts the standard military fl at seam construction for bed tarps where only two layers of nonreinforced canvas comprise each seam. Tarp grommets are sharp edged, prone to rip out, and sometimes poorly fi nished or not fi nished at all. Now look at Figure No. 2, the BEACHWOOD CONSTRUCTION! Each of our tarp’s seams is double felled and interlocked: four layers of material creating its’ own seam reinforcement. Our grommets are high quality black plated brass with rolled edges and teeth to prevent rusting, rip out, or glint! No unfi nished or rough canvas edges either. All edges are folded or fi nished. If an original WWII specifi cation called for leather reinforcements, that’s what you get, too! Whether your’re purchasing a DELUXE or TRAIL RUN tarp, this is the type of attention to details you receive from BEACHWOOD! Believe us, we try to carry these hidden extras through every product that we make.
Base Part Number for Cushion (pair) .. ..............SIZE ...........................................VEHICLES with ..................................................... VEHICLES without
B2381 ................................... 10" x 29" .............................................. CJ2A ...........................................................MB GPW CJ3A CJ3B3A2381 .................................. 10" x 26" .............................................. CJ3A CJ3B ...........................................................----------------C2381 .................................... 10" x 32" .............................................. CJ5 ..............................................................CJ2A CJ5 M38 M38A1
Wheelhouse top bow brackets (sockets) Wheelhouse top bow brackets (sockets)
GROUP 23: REPLACEMENT VINYL JEEP SEATS & ENCLOSURES
We are also able to supply cost effective replacement black vinyl after market jeep enclosures and seat assemblies. These enclosures are supplied with ALL necessary hardware including door frames, brackets, top bows, mounting hardware, covers, and instructions. Nothing else to buy! (You will have to drill holes). If you want to enclose your vehicle without the expense of original style bows and canvas, this it the way to go! We also carry replacement after market rear seat assemblies. These seat assemblies can be retro-fi tted on any earlier jeep listed below. These are all great non-original economical solutions to your seating and top needs.
SEAT CUSHION INSTALLATION KIT: B2303 B2303 C2303 C2303 ---- 2A2303 3A2303 3B2303 ---- Nearly (100) separate pieces of dullblack plated military fi nish stain-less steel and brass slot head screw 3 nuts, and washers; fastens (1) set of six cushions or covers to seat frames.
CRASH PAD COVERS: B2304 B2304 ---- ---- ---- ---- ---- ---- ----Original style canvas coverssupplied so you can recover your 4own crash pads (1 RPV; pair).
CRASH PAD INSERTS: B2304-I B2304-I ---- ---- ---- ---- ---- ----Genuine animal hair inserts suppliedso you can recover your own crash pads (1 RPV; pair).
CRASH PADS RECOVERED: B2305 B2305 ---- ---- ---- ---- ---- ---- ----Please supply your original metalbacks cleaned and painted. We recover your metal backs with animal 5hair inserts and canvas covers (1 RPV; pair).
CRASH PADS COMPLETE (with metal): B2306 B2306 ---- ---- ---- ---- ---- ---- ----Crash pad assemblies madefrom powder coated steel plates, horsehairpadding,and canvas; complete,all ready upholstered; not a kit; 6ready for installation (1 RPV; pair).
INSTALLATION SCREWS FOR B2305 or B2306: B2306-S B2306-S ---- ---- ---- ---- ---- ----Round head slotted machine screws (8 RPV)
DOORWAY “HALF CURTAINS”: B2307-X B2307-X ---- ---- ---- ---- ---- ----Duplicates original doorwaycurtains using original NOS brassblack antique hardware;jeep must have properly set body sockets (1 RPV; pair). (Also see Part No. B1824)
WINDSHIELD COVER (PLAIN FACE): B2314-X B2314-X 3A2314-X 5E2314-X E2314-X* 2A2314-X 3A2314-X 3B2314-X 5E2314-XProtects folded down windshield; prevents aircraft observation due to glass refl ection. Originally MB or GPW issue. Accomodates windshieldswith or without metal rifl e racks or vacuum wiper motors.(Specify plain face without a star at all; factory issue).
MB GPWSHOWN
7
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
*E2314-A2-X(For the A2-X
windshield with large
late electric wiper motor)
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 55C
C1851 (WIRE)
37
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
WINDSHIELD COVER WITH STAR or B2314-X B2314-X 3A2314-X 5E2314-X E2314-X 2A2314-X 3A2314-X 3B2314-X 5E2314-XINVASION STAR & CIRCLE: Protects folded down windshield; prevents aircraft observation due to glass refl ection.(Specify plain star or star with broken invasion circle).
HOOD WELT KIT: B1719 B1719 2A1719 5E1719 ---- 2A1719 2A1719 3B1719 5E1719Pre-cut 3/4" dual beaded welt buffersradiator grill top from hood;includes rivets
STRAP SET for AX & SHOVEL: B1920 B1920 B1920 D1920 E1920 ---- ---- ---- ----100% Cotton straps with originalstyle appropriate WWII or postwarplated dull black buckles and tips; authentically secures tools on jeep.
STRAP SET for TOP BOW STOWAGE: B1921 B1921 C1921 D1921 E1921 2A1921 2A1922 2A1922 2A1922100% Cotton straps with originalstyle appropriate WWII or postwarplated dull black buckles and tips; secures stowed or folded top bows to jeep. COLLAPSIBLE WATER BUCKET: B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395 B23952-gallon reinforced pail as seen on almostevery WWII and many post war military vehicles.
COLLAPSIBLE WATER PITCHER: B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 RARE! Canvas pitcher stowed in the glove or tool box; used to fi ll radiators. Really rare & handy!
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
B1851-L (CAST)
17
18
19
20
21
95
98
Use B1719-E for Slat Grill MB Jeeps
B2025-A B2025-B
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 56C
STRAP SET for TOP STOWAGE: B1922 B1922 C1922 D1922 E1922 2A1922 2A1922 2A1922 2A1922100% Cotton straps with original style WWII or postwar dull black plated buckles and tips; secures MB or GPW jeep top under passengerseat; M38, M38A1,or CJ jeep top to fender wells;M151 jeep top under rear seat.
STRAP for securing TANDEM TOW BAR: B1924 B1924 B1924 B1924 ---- B1924 B1924 B1924 B1924100% Cotton strap with original dull black plated buckle and tip; secures tandem tow bar to jeep grill block B2212.
STRAP for WINDSHIELD TIE DOWN : ---- ---- C1923 D1923 E1923 2A1923 2A1923 2A1923 2A1923100% Cotton strap with originalplated dull black buckle and tip;secures jeep windshield to hood when in folded down position.
DOORWAY BODY CANVAS FASTENERS: B1824 B1824 ---- D1824 ---- B1824 ---- ---- D1824Original style dull military blackfi nish body fastener for both door ways;(14) sockets required MB or GPW Half Curtains (B2307);(4) sockets required for CJ2A doors;(8) studs required for M38A1or M170 doors.
REPLACEMENT M38A1 BODY FASTENER: ---- ---- ---- 2A2025-R ---- ---- ---- ---- ----Unoriginal mil-spec black body “turn” head fastener for M38A1 doorways; (8) studs required for M38A1 or M170 doors;replaces Part No. D1824.
WINDSHIELD STUD for late MB or GPW: B2025-A B2025-A ---- ---- ---- ---- ---- ---- ----Steel late “capstan” style`reproduction studs made withpermission from the originalmanufacturer; don’t confuse these with soft steel or brass foreignreproductions available elsewhere;set of (10) required per jeep.(Recommended for durability over B2025-B)
WINDSHIELD STUD for early MB or GPW: B2025-B B2025-B ---- ---- ---- ---- ---- ---- ----Original style early “push button”stud; set of (10) required per jeep.
WINDSHIELD STUD for CJ2A (NOS): ---- ---- ---- ---- ---- 2A2025 ---- ---- ----Original NOS black fi nish “turn” headstud; set of (10) required per jeep..
WINDSHIELD STUD (Replacement): ---- ---- ---- ---- ---- 2A2025-R ---- ---- ----Unoriginal mil-spec “turn” head black studswith dual screw hole base fasteners which work fi ne as replacements. Requires matching grommet in top; set of (10) required per top.
GLOVE BOX SPARE PARTS BAG: B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-XBag carries spare parts such as spark plugs,taillight lenses,etc. in glove or tool box.
ORIGINAL STYLE TOOL BAG: B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-XWWII and post war issue 'envelope' styletool bag; standard issue most vehicles.
RIFLE RACK COVER: B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-XZippered 44" long cover encloseswindshield rifl e rack and fi ts M1 Garand rifl e& others; (specify longer if required). 29
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
(Optional)
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
2A2025-R
28
27
26
25
25A
25B
25R
24
24
23
22
M-SERIES1" BUCKLE & TIP
B2025-A
B1824
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
This is an economical strap kit that replicates the ---- ---- ---- ---- ----function of the more expensive original top bow 2319 series support rods for stabilizing the original (6) piece nesting1858 series CJ top bows when using only a summer top.(-F ) FRONT bow to windshield, (-R) REAR bow to center bow)
FUEL TANK HOLD DOWN STRAP WELT KIT: B0330 B0330 C0330 D0330 ---- 2A0330 2A0330 2A0330 2A0330Pre-cut welt buffers hold down straps & tank.
FUEL TANK to FLOOR PAN WELT KIT: B0331 B0331 C0331 D0331 ---- 2A0331 2A0331 2A0331 2A0331Pre-cut welt buffers tank underside & fl oor.
RADIATOR GRILL AIR DEFLECTION KIT: B1732 B1732 C1732 ---- ---- 2A1732 2A1723 2A1732 ----Pre-cut genuine animal hair strips used to defl ect air into radiator forMB,GPW,and CJ jeeps. M38’s kit usesrubberized felt. (specify sheet metalor slat grill.)
2-PIECE JERRY CAN STRAP KIT with Rivets: B1934 B1934 C1934 C1934 E1934 C1934 C1934 C1934 C1934Original factory style 2-piece pre-cut 100% cotton straps rivets directly to can holder B1855.
1-PIECE JERRY CAN REPLACEMENT STRAP: Late fi eld style replacement for factory strap kit. Wraps around can holder B1855 No riveting needed. B1934-NC B1934-NC C1934-NC C1934-NC ---- C1934-NC C1934-NC C1934-NC C1934-NC
STANDARD WWII ISSUE VEHICLE B1935-B B1935-B B1935-B B1935-B E1935-B B1935-B B1935-B B1935-B B1935-BDOORWAY SAFETY STRAPS: Adjustable 100% Cotton vehicledoorway safety strap with original WWII cast snap hooks. Typical style issue for almost all vehicles in WWII.
EARLY WWII ISSUE VEHICLE DOORWAY B1935-C B1935-C ---- ---- ---- SAFETY STRAPS WITH LEATHER: Same as no. B1935-B except has an additionalsecondary WWII buckle and leather retaining slides; discontinued early in WWII.
HOOD BUMPERETTE WELT KIT: ---- ---- ---- 5E2038 E2038 ---- ---- ---- 5E2038Pre-cut welt re-lines windshieldbumperettes;protects hood; rivets included.
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
2A1917-R 2A1917-R 2A1917-R 2A1917-R
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
50
CJ2ASHOWN
2A2025
B1824
2A2025-R
M38A1SHOWN
D1824
2A1851C1851
FootmanLoop
3736
CAST SNAP HOOK
USED ON
SAFETY STRAPS
SAFETY STRAP RELATED
MOUNTING HARDWARE:
B1835 BOLT & SWIVEL BRACKET (2 RPV);
B1835-EB DASHBOARD EYEBOLT (2 RPV)
34
31
38
63
35C
35B
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
FENDERS & STEP-UP PADS WELT KIT: B1739 B1739 B1739 5E1739 ---- B1739 B1739 B1739 5E1739Pre-cut welt kit used between fenders, body, & step-up pads (One kit required per vehicle; 1 RPV).
FRAME WELT KIT: B1540 B1540 2A1540 5E1540 ---- 2A1540 2A1540 2A1540 5E1540Pre-cut welt kit used between allcontact points of the frame andbody as parts manual requires. (1 RPV)
STEERING COLUMN WELT: B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441Pre-cut welt used between steeringcolumn and column bracket tobuffer metal to metal contact.
INNER WINDSHIELD CANVAS WELT KIT: B2042-C B2042-C ---- ---- ---- ---- --- ---- ----Pre-cut kit seals (3) edges of MB or GPW inner windshield to outer windshield frame. For others;
FOOTMAN LOOPS: B1851-L B1851-L C1851 C1851 2A1851 2A1851 2A1851 2A1851 2A1851Original style cast loop for MB or (B1851-E (also fi ts MB/GPW)GPW; wire stamped loop for postwar for earlycivilian and military jeeps. slat grill MB's)
JERRY CAN NOZZLE SPOUT COVER: B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362Stops spout rattling in tool box & protects from sand. (Stenciled 'US').
WINCH COVER: B2374 B2374 C2374 D2374 ---- B2374 C2374 C2374 C2374Protects head on Braden WWII or Ramsey post war winch drum and cable.(Can be stenciled "US")
TIRE CHAIN BAG: B2376-X B2376-X B2376-X B2376-X B2376-X B2376-X B2376-X B2376-X B2376-XRare accessory for carrying tirechains in your tool box; can be stenciled forFord or Willys jeeps. (Holds 2 chains per bag)
PARTS MANUAL POUCH: B2382 B2382 B2382 B2382 B2382 B2382 B2382 B2382 B2382Canvas or vinyl pouch for 8 1/2" x 11" parts manual. (Actual pouch size 11"x14".)
MAINTENANCE MANUAL POUCH: B2383 B2383 B2383 B2383 B2383 B2383 B2383 B2383 B2383Canvas or vinyl pouch for 8 1/2" x 11" maintenance manual. (Actual pouch size 8"x11".)
LOWER WINDSHIELD TO COWL
WEATHERSTRIP GASKET: B2086* B2086* 3A2086* 5E2086 ---- B2086* 3A2086* 3A2086* 5E2086Heavy original style rubber gasketthat seals your outer windshieldframe to the body cowl.(*These are interchangeable)
VEHICLE SIREN COVER: B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385Cover for Federal Signal Co.vehicle siren Model EGH
B1851-L (CAST)
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
39
40
42
44
41
50
51
64
74
62
76
85
86
83
82
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 59C
NOTE: For other accessories such as winch covers, cargo bow roll-up straps, cargo cover fasteners, etc., see the
TRUCK STRAPS, WELTS, COVERS, BOOTS, AND FASTENERS section of this catalog.
GROUP 19 & 23: 1/2 & 3/4 TON DODGE COMMAND CAR SEATS & TOPS
These original style covers are double stitched conforming to WWII Dodge military design and are ready for you to install on your springs! These sets are available in early leather or leatherette, or late olive drab canvas. (Your springs must be original manufacture and in good condition, adhering to original dimensions. Otherwise, it may be necessary to send us your springs for a custom cover, or we can supply you with roll goods for your local upholstery shop to cover the seats.) We can re-pad and recover your Hotchkiss or original Dodge seat springs with genuine animal hair or foam, and original style Dodge covers here at Beachwood Canvas (Please supply the springs and seat bottom wood stripped, cleaned and painted. Leatherette and canvas pricings are listed below. Recovering of springs is reserved for scheduling during our slower times.) 1/2 Ton 3/4 TonCanvas seat cover set (4 covers only) ....................................... 2C2302 ............... 3C2302Replacement seat cushion set (4 Pieces) .................................. 2C2301-R ........... 3C2301-RCrash Pad Assemblies with backing Cardboard (pair) ............................................ 3C2306-XInstallation Kit for Two Crash Pads .......................................................................... 3C2303
NEW!
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Build your custom TOP, DOORS and STRAP SETS (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Data plate sets include the caution, cooling, shift, nomenclature, & publications plates. (Radio voltage & winch plates are sold separateely and are not part of the sets). Data Plate Set (set of 6) ............................................................. 2C2430 ............... 3C2430Radio Voltage Plate .................................................................... 2C2430-RADIO ... 2C2430-RADIOBraden MU2 Winch Plate ........................................................... 2C2434 ............... 2C2434NEW! FIREWALL PAD KIT ................................................................................... 3C1848
Our beautifully detailed Dodge command car top kits are the result of exhaustive archive research and duplicate the original top kits supplied to Dodge. If you want that perfectly detailed restora-tion, this kit will do the job! The original top is composed of separate canvas assemblies which are upholstered to the top bows, just like the original. The kit includes all black canvas hardware and fasteners, all canvas assemblies, front weather strip, olive drab beauty strips, end tips and tip tacks, detailed installation instructions (not sold without top kit). Optional kits include the top bow web and leather kit, rear bow straps (leather or olive drab cotton web), bow and cowl tack strips. The rear panel is supplied with a D.O.T. approved vinyl safety window which is sized so that you can install the original metal frame and glass at a later date, otherwise please supply your painted original rear window frame and we will install it for you.
Original Style Non-Removable Top Kit (Upholstering required) . 2C2309 ............... 3C2309NEW! One-Piece Removable Top (No upholstering!) .......... 2C2309-ONEPC .... 3C2309-ONEPCComplete Top Bow Assembly (Metal Portions Only) .................. 2C1858 ............... 3C1858Top Bow Web Support Kit with Leather Washers ....................... 2C1936 ............... 3C1936Strap Set (4 pcs) Rear Pivot Bow Support; Web (mid to late war) ................. 2C1921-WSET .......2C1921-WSETStrap Set, (4 pcs) Rear Pivot Bow Support; Hybrid Leather & Web (early war) . 2C1921-LSET .........2C1921-LSETStrap, Top Bow Stowage; Web (mid to late war) ....................................... 2C1922-W ........... 2C1922-WStrap, Top Bow Stowage; Hybrid Leather & Web (early war) ........................ 2C1922-L ............ 2C1922-LFront and Rear Bow Cowl Tack Strip Kit .................................... 2C2309-TS ......... 2C2309-TSDoor Set, (4 pcs) front & rear complete with frames & hinges ... 2C2312-OF ......... 3C2312-OFRear body deck stud kit .............................................................. 2C1824-R ........... 2C1824-RSide body door stud kit ............................................................... 2C1824-S ............ 2C1824-SRunning board bead (for both boards) ....................................... 2C1927 ............... 2C1927
1/2 Ton 3/4 Ton
FIREWALL PADS & DATA PLATES
----------For the DO IT YOURSELFERS!---------48" wide canvas for local top upholstering (per yd) .................... B2300-48C-8 ...... B2300-48C-860" wide canvas for local top upholstering (per yd) .................... B2300-60C-8 ...... B2300-60C-860" wide canvas for local seat upholstering (per yd) .................. B2300-60C-10 .... B2300-60C-1054" wide medium brown leatherette for local seat upholstering (per yd) ..... B2300-BRVDK .... B2300-BRVMED54" wide dark brown leatherette for local seat upholstering (per yd) .... B2300-BRVDK .... B2300-BRVDHOG-RINGS for Spring Seat Covers (100 clips required per cover)....................B3061-X2G-P-1 ..........B3061-X2G-P-1
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
NOTE: For other truck accessories such as winch covers, cargo bow roll-up straps, cargo cover rope kits, chain covers, fasteners, etc., see the TRUCK STRAPS, WELTS, COVERS, BOOTS, AND FASTENERS section of this catalog.
These original style covers are double stitched conforming to WWII Dodge WC military design and are ready to install on your springs! The crash pad covers are duplicates of the originals used on 1/2, earlier 3/4 and earlier1-1/2 ton bucket seats. Features include heavy original style canvas, black brass buttons, and original style animal hair insert pads. (Mid-war buckets had smaller crash pads and late 3/4 ton buckets no crash pads at all.) We supply with animal hair, foam paddings and clips for your Hotchkiss or original Dodge seat springs, and original style Dodge covers here at Beachwood Canvas. 1/2 Ton 3/4 & 1-1/2 Ton COVER SET, OPEN CAB (4 pieces; equips one truck) .....................2W2302 ......................3W2302Crash Pads & Inserts; Early War (2 pieces; equips one seat) ............2W2306 ......................3W2306-ECrash Pads & Inserts; Late War (2 pieces; equips one seat) .............2W2306 ......................3W2306-LCOVER SET, CLOSED CAB (2 pieces; equips one truck) ...............2WC2302 ....................-------CLIPS for LOWER BUCKET SEAT COVERS (40 clips required per cover) ..............2W2302-CLIP .................2W23012-CLIP HOG-RINGS for ALL OTHER SEAT COVERS (40 clips required per cover) .............B3061-X2G-P-1 .. ..............B3061-X2G-P-1
1/2 Ton Closed Cab 1/2 Ton Open Cab 3/4 Ton Open Cab 1-1/2 Ton Open CabCAB TOP with Web or Leather Buckle Assemblies ..................................-------. ........... 2W2309-X.......... .3W2309-X......... ..3W2309-XCARGO COVER with Web or Leather Buckle Roll-UPs & Trim .. ..... 2WC2307-X ........ 2W2307-X........... 3W2307-X............4W2307-XROPE KIT, SIDES of CARGO COVER (1 kit required) .......... ...... VW1910-R .......... VW1910-R........... 3W1910-R............4W1910-REND CURTAIN with Optional Openings or Flaps (1 or 2 needed) ....... 2W2313-X ........... 2W2313-X. ..........3W2313-X.. .........3W2313-XROPE KIT, END CURTAIN (2 kits required) .............................. ...... VW1913-R .......... VW1913-R........... 3W1913-R............3W1913-R
Our beautifully detailed and researched Dodge & cargo covers features include original style reinforcements, mil-spec black grommets, fasteners, buckles, issue stenciling, genuine heavy leather side roll-up buckle assemblies on the cargo covers (allows you to roll-up and secure each cargo tarp side)and leather strap assemblies on the cab covers , brass riveted leather reinforced rope casings, and mil-spec ‘manila’ casing rope. For economy, the cab and cargo cover can be supplied with late style olive drab cotton buckle assem-blies or no roll-up buckles at all. You have your choice of original fl apped window openings or a number of other options on the end curtains. No other top anywhere competes with this tops authenticity.
Data Plate Set (Set of 6)............................................................. 2C2430. .............. 2C2430................ 3C2430 ................3C2430Radio Voltage Plate .................................................................... 2C2430-RADIO ......... 2C2430-RADIO..........2C2430-RADIO......... 2C2430-RADIOBraden MU2 Winch Plate ........................................................... 2C2434 ............... 2C2434........... ....2C2434......... .......2C2434NEW! FIREWALL PAD KIT ....................................................... -------. .................. -------..... ...............3C1848......... .......3C1848NEW! FIREWALL PAD KIT for 3/4 Ton WC53 Carry-All or WC54 Ambulance .....................3WA1848
Build your custom CAB, CARGO COVERS & END CURTAINS (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the
"SEARCH FOR" box at www.beachwoodcanvas.comOtherwise please e-mail, fax or call us for current pricing!
Build your custom SEAT COVER SET FOR YOUR ORIGINAL SEAT SPRINGS (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into
the "SEARCH FOR" box at www.beachwoodcanvas.comOtherwise please e-mail, fax or call us for current pricing!
Missing or worn out open cab seat springs? Our exclusive high density “Pincore” foam replacement cushion sets use original style covers and feel just like springs & DO NOT bottom out! Only you will know the secret! (Before ordering please assess your situation as described below):
SITUATION CF:If you need economical jeep
style upper & lower cushions with attachment fl aps (no plywood), ready
to drop upholster onto your original sheet metal pan.
SITUATION CFPT:If you need complete upper
cushions & lower upholstered plywood pans
that bolt onto your seat bucket sides (replacing your original sheet metal pans).
SITUATION CFP:If you need complete upper
cushions & lower upholstered plywood pans ready to drop INSIDE of
your original sheet metal pan.
Build your custom SPRING REPLACEMENT SEAT CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com........Otherwise please e-mail, fax or call us for current pricing!
CUSHION SET, 1/2 TON TON OPEN CAB ...................... Base Part Number .................. 2W2301-R-XCUSHION SET, 3/4 or 1-1/2 TON TON OPEN CAB ........ Base Part Number .................. 3W2301-R-X
FIREWALL PADS & DATA PLATES
Data plate sets include the caution, cooling, shift, nomenclature, & publications plates. (Radio voltage & winch plates are sold separateely and are not part of the sets).
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 61C
NOTE: For other truck accessories such as winch covers, cargo bow roll-up straps, cargo cover & end curtain tie down rope kits, chain covers, fasteners, etc., Please see the TRUCK STRAPS, WELTS, COVERS, BOOTS, AND FASTENERS section of this catalog. Remember also that all covers listed here can be produced in a durable synthetic in other colors other than olive drab cotton canvas.
Our cargo and cab cover assemblies are also the same covers that we supply the U.S. Government. If you want that perfect detailed res-toration, these covers will help you fi nish the job! Features for these truck covers include full stress point reinforcements, mil-spec black grommets, fasteners, and buckles, mil-spec genuine manilla casing rope, and issue stenciling. Limiting your budget? You may choose a cargo cover without any side roll-up buckles assemblies (you need roll-up buckle assemblies in order to secure both sides of the cargo tarp in the rolled up position). To further save you money on our CAB TOPS and CARGO BOX END CURTAINS, you may choose to eliminate unnecessary reinforcements and replace rear opening rear window fl aps with a static vinyl window.
GROUP 19 & 23: M37 & M715 SERIES SEAT, CAB & CARGO COVERS
These cushions and covers duplicate the factory issue products, are ready for you to install, and are the same covers that we supply to the U.S. Government. Each cover is double stitched as per military specifi cation. You may choose M37 covers without brass black grommets in order to save costs to you! The M715-M725 (KS2302) set includes two seat bottom and two seat upper covers with options to add replacement foam inserts, spring paddings, or new plywood.
Most Beachwood Canvas tops and covers exceed military canvas weight specifi cations by at least one grade. But contrary to popular belief, canvas is NOT the best material for trucks that are being used for work, or used in conditions that demand minimum maintenance and high durability. For these conditions, olive drab VCP vinyl products are the answer! We have access to military specifi cation materials at a great price that allow us to make these covers at a savings that can be passed on to you! And the beauty is that they will last longer than canvas with less care! M37 or M42........DG2308-VCP M715......KS2308-VCP
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DRIVER ................... UPPER ...Base Part Number... DG2302-1XDRIVER ................... LOWER ..Base Part Number... DG2302-2XPASSENGER ........... UPPER ...Base Part Number... DG2302-3XPASSENGER ........... LOWER ..Base Part Number... DG2302-4X
M37M42
DRIVER ................... UPPER ...Base Part Number... KS2302-1XDRIVER ................... LOWER ..Base Part Number... KS2302-2XPASSENGER ........... UPPER ...Base Part Number... KS2302-1XPASSENGER ........... LOWER ..Base Part Number... KS2302-2X
M715M725
DRIVER ................... UPPER ...Base Part Number... DGA2302-1XDRIVER ................... LOWER ..Base Part Number... DGA2302-2XPASSENGER ........... UPPER ...Base Part Number... DGA2302-3XPASSENGER ........... LOWER ..Base Part Number... DGA2302-4X
M43
CAB COVER (TOP) MIL-SPEC with Rear Panel ......................................Base Part Number ....DG2308-X
CAB COVER "BIKINI" TOP without a Rear Panel (Just canvas over head!)......Base Part Number ....DG2308-BIKINI
STRAPS (Pair) CAB TOP SUPPORT (Not included with cab tops) .........Base Part Number ....DG1917
CARGO COVER (TARP) ...............................................................................Base Part Number ....DG2307-X
CARGO BED BOW STOWAGE STRAPS (Pair; attach to bed sides) ....................Base Part Number ....DG1921
END CURTAIN (One or two required) .........................................................Base Part Number ....DG2313-X
STRAPS PIONEER TOOL TIE-DOWN ............................................. Base Part Number ....DG1920
NEW! FIREWALL PAD KIT! ................................................................ Base Part Number ....DG1848
END CURTAIN (M42 only zippered; one required rear bed) ....................Base Part Number ....DGC2313
SIDE CURTAIN (Pair) (M42 only with windows) ......................................Base Part Number ....DGC2310-S
M37M42
M715
CAB COVER (TOP) MIL-SPEC .................................................................Base Part Number KS2309CARGO COVER (TARP) ..............................................................................Base Part Number KS2307-XEND CURTAIN (One or two required) ........................................................Base Part Number KS2313-XSTRAP WINDSHIELD SECURING (Down Position) ................................Base Part Number KS1923STRAP SET; Cab Bow Stowage Straps (Set of three) ...................Base Part Number KS1915STRAP SET; Cab Door Stowage Straps (Set of six) ......................Base Part Number KS1916STRAP SET; Pioneer Tool Straps (Set of four) ........................ Base Part Number KS1920
REAR BENCH ....... UPPER SHORT .......Base Part Number ... DGC2301-5X-SREAR BENCH ........ LOWER SHORT .....Base Part Number ... DGC2301-6X-SREAR BENCH ........ UPPER LONG ........Base Part Number ... DGC2301-5X-LREAR BENCH ........ LOWER LONG .......Base Part Number ... DGC2301-6X-L
REAR BENCH ....... UPPER .....................Base Part Number ... KSA2302-5XREAR BENCH ........ LOWER ...................Base Part Number ... KSA2302-6X
REAR BENCH ....... UPPER .....................Base Part Number ... DGA2302-5XREAR BENCH ........ LOWER ...................Base Part Number ... DGA2302-6X
Build your custom CAB, CARGO, END CURTAINS and STRAP SETS (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
M42
ECONOMY & DURABILITY!.........OLIVE DRAB VCP VINYL TOPS FOR THOSE WHO WORK THEIR TRUCKS!ORDER ON-LINE by inserting the base part number below into the "SEARCH FOR" box at
www.beachwoodcanvas.com
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 62C
GROUP 19 & 23: WWII CHEVROLET & GMC TRUCK SEAT & COVERS
NOTE: For other truck accessories such as winch covers, cargo bow roll-up straps, cargo cover rope kits, chain covers, fasteners, etc., see the TRUCK STRAPS, WELTS, COVERS, BOOTS FASTENERS section of this catalog.
These cushions and covers duplicate the factory issue products. Each cover is double stitched as per military
design. The open cab CCKW seat back cushions and seat bottom spring covers, or the closed cab CCKW and
Chevrolet closed cab bench seat bottom and back covers are supplied ready for you to install! (Your bench
springs must be original manufacture and in good condition, adhering to original dimensions. Otherwise,
we can supply you with roll goods & spring padding for your local upholstery shop to cover the seats.)
Our beautifully detailed authentic open or closed cab cargo covers, end curtains, and open cab covers are
also the result of archive research. Features include original style reinforcements, mil-spec black grom-
mets, fasteners, buckles, issue stenciling, genuine heavy leather side roll-up assemblies on the cargo cover
(allows you to roll-up and secure each of the cargo tarp in the up position), riveted leather reinforced rope
casings, mil-spec genuine ‘manila’ casing rope, and CCKW open cab rear curtain steel reinforcement strips.
We can also recover your original open cab CCKW door frames to original specs. For economy, the cab
and cargo cover can be supplied with late style olive drab cotton roll-up buckle assemblies, or no roll-up
buckle assemblies at all. To further save you money, on our cargo box end curtains, you may choose to
eliminate unnecessary reinforcements and replace the rear window fl aps with static vinyl windows, or no
window at all! No other top anywhere competes with this top’s authenticity or detail. For CCKW, specify
CCKW-353 long beds & CCKW-352 short beds, or a dump body. Specify the cargo or dump body for the
1-1/2 ton Chevrolet.
Build your custom CAB TOP, DOORS, and END CURTAINS (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the
"SEARCH FOR" box at www.beachwoodcanvas.com Otherwise please e-mail, fax or call us for current pricing!
Closed Cab Closed Cab Closed Cab Open Cab Open Cab
NOTE: For other truck accessories such as winch covers, cargo bow roll-up straps, cargo cover rope kits, chain covers, fasteners, etc., see the TRUCK STRAPS, WELTS, COVERS, BOOTS, AND FASTENERS section of this catalog. Remember also that all covers listed here can be produced in a durable synthetic in other colors other than olive drab cotton canvas.
These cushions and covers duplicate the factory issue products and are the same covers that we supply to the U.S. Government. Each cover is double stitched as per military specifi cation. The seat back cushions and seat bottom spring covers are supplied ready for you to install! If you are missing seat springs, we can supply replacement cushions using our exclusive heavy density “Pincore” foam inserts. These inserts use the original style covers and prevent any bottoming on the seat pan. (Do not confuse this foam with less dense and less expensive foam used in common upholstery applications.)
NEW!
Our beautifully detailed cargo covers, single piece M34 or M35 cab covers, and our two piece M135 or M211 cab covers are also the same covers that we supply to the U.S. Government. Features include full original stress point reinforcements, mil-spec black grommets, fasteners, and buckles, mil-spec ‘manila’ casing rope, M211/M135 cab top rear curtain steel reinforcement strips, and issue stenciling. Additional XM211 and M135 cab cover features include a rear roll-up window and all appropriate reinforcements and straps. No other top anywhere competes with this top’s authenticity or detail. Limiting your budget? For economy, the cargo cover can be supplied with or no roll-up buckles at all. You have your choice of original fl apped window openings or a number of other options on the end curtains.
Most Beachwood Canvas tops and covers exceed military canvas weight specifi cations by at least one grade. But contrary to popular belief, canvas is NOT the best material for trucks that are being used for work, or used in conditions that demand minimum maintenance and high durability. For these conditions, olive drab VCP vinyl products are the answer! We have access to military specifi cation materials at a great price that allow us to make these covers at a savings that can be passed on to you! And the beauty is that they will last longer than canvas with less care! M34 or M35 Series Trucks........R42308-VCP
ECONOMY & DURABILITY!.........OLIVE VCP VINYL TOPS FOR THOSE WHO WORK THEIR TRUCKS!ORDER ON-LINE by inserting the base part number below into the "SEARCH FOR" box at
www.beachwoodcanvas.com
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DRIVER ................... UPPER ...Standard Seat ..........................Base Part Number .KS2302-1XDRIVER ................... LOWER ..Standard Seat ..........................Base Part Number .KS2302-2X
PASSENGER ........... UPPER ...Standard Seat ..........................Base Part Number .R42302-3XPASSENGER ........... LOWER ..Standard Seat ..........................Base Part Number .R42302-4X
M34M35Early
M135M211
DRIVER ................... UPPER ..."Air-Ride" Adjustable Seat ...Base Part Number .R42302-1ARDRIVER ................... LOWER .."Air-Ride" Adjustable Seat ...Base Part Number .R42302-2AR
PASSENGER ........... UPPER .......................................................Base Part Number .R42302-3XPASSENGER ........... LOWER ......................................................Base Part Number .R42302-4X
Build your custom CAB, CARGO, END CURTAINS and STRAP SETS (in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DRIVER ................... UPPER .......................................................Base Part Number .GM42302-1XDRIVER ................... LOWER ......................................................Base Part Number .GM42302-2X
PASSENGER ........... UPPER .......................................................Base Part Number .GM42302-3XPASSENGER ........... LOWER ......................................................Base Part Number .GM42302-4X
M34M35Late
M34 M35 M135 M211CAB COVER :
Cab Upper & Rear Sections (No doors) R42308-X R42308-X GM42308-X GM42308-Xwith Optional Plain panel, Static Plastic Window or Original Style Opening Flap
CARGO BOW SLEEVES: ---- ---- VW2304 3W2304 4W2304 CK2304 DG2304 DG2304 CK2304Sleeves that cover bows and extend the lifeof your cargo cover by buffering bow to tarp contact; (1) Kit required per vehicle (1 RPV).
CARGO TARP ROPE KIT: ---- ---- VW1910-R 3W1910-R 4W1910-R CK1910-R 3W1910-R VW1910-R CK1910-RKit includes enough pre-cut and ringed rot resistant 'manilla' or synthetic rope to properlytie down your cargo tarp to side bed hooks.
END CURTAIN ROPE KIT: ---- ---- VW1913-R 3W1913-R 3W1913-R CK1913-R DG1913-R DG1913-R CK1913-RKit includes enough pre-cut and ringed rot resistant 'manila' or synthetic rope to properlytie down one end curtain to bed or tailgate hooks.
WINDSHIELD COVER (PLAIN FACE) or with 2C2314-X 3C2314-X 2W2314-X 3W2314-X 3W2314-X ---- DG2314-X ---- R42314-XPLAIN STAR or INVASION STAR & CIRCLE: Protects folded down windshield; prevents aircraft observation due to glass refl ection.(Specify plain face, plain star or star with broken invasion circle).
TRANSMISSION-TRANSFER CASE LEATHER PAD: ---- 3C0718 ---- 3C0718 3C0718 CK0718 ---- ---- ----Genuine heavy leather pad that screws to fl oor pans to seal transmission and transfer case levers.
TRANSMISSION-TRANSFER CASE LEATHER PAD ---- 3C0718-W ---- 3C0718-W 3C0718-W CK0718-W ---- ---- ----with WINCH HOLE:
TRANSMISSION PAD INSTALLATION KIT: ---- 3C0718-A ---- 3C0718-A 3C0718-A CK0718-A ---- ---- ----Screw, bolt and/or washer kit for securing0718 series pads to transmission humps.
HOOD WELT KIT: 2C1719 3C1719 2C1719 3C1719 3C1719 CH1719 DG1719 KS1719 R41719Pre-cut appropriate fl at or dualbead welt buffers radiator grilltop from hood; includes rivets.
STRAP SET for PIONEER TOOLS (LEATHER): VC1920-L VC1920-L VC1920-L VC1920-L VC1920-L VC1920-L VC1920-L VC1920-LGenuine leather straps with original style appropriately fi nished buckles; authentically secures tools on pioneer rack on truck.
STRAP SET for PIONEER TOOLS (WEB): VC1920-W VC1920-W VC1920-W VC1920-W VC1920-W VC1920-W VC1920-W KS1920 VC1920-W100% Cotton straps with original style WWII or Postwar dull black plated buckles & tips; authentically secures tools on pioneer rack on truck.
STRAP(S) for TOP BOW STOWAGE (WEB): 2C1921-W 2C1921-W ---- ---- ---- ---- DG1921 ---- ----100% Cotton straps which secures all top bows to vehicle body when in the lowered position.
STRAP for TOP BOW STOWAGE (LEATHER): 2C1921-L 2C1921-L ---- ---- ---- ---- ---- ---- ----Genuine heavy leather strap secures all topbows to vehicle body when in the lowered position.
STRAP SET for CARGO TARP SIDE ROLL-UP (WEB): ---- ---- VW1922-W VW1922-W 4W1922-W 4W1922-W VW1922-W VW1922-W 4W1922-W100% Cotton straps which attach to the 2387 series cargo bowcorner brackets; secures cargo tarp in the rolled up position. You must have the web roll-up buckle assemblies attached to your cargo tarp & attaching bracket VW1922-BKT. Includes rivets.
STRAP SET for CARGO TARP SIDE ROLL-UP (LEATHER): ---- ---- VW1922-L VW1922-L 4W1922-L 4W1922-L VW1922-L VW1922-L 4W1922-LGenuine heavy duty leather straps which attach to the 2387 series cargo bow corner brackets; secures cargo tarp in the rolled up position. You must have the leather roll-up buckle assemblies attached to your cargo tarp & attaching bracket VW1922-BKT. Includes rivets.
STRAP SET BRACKET for 1922 SERIES STRAP SETS ABOVE: ---- ---- VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKTMetal strap brackets that bolts to the corner bow brackets (3W2387 & CK2387) & attaches to the 1922 roll-up straps series above; secures cargo tarp in the rolled up position. (6 required for 3-bow trucks; 10 required for 5-bow trucks)
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
18A
18W
18
19
4
10R
13R
21W
20L
20W
21L
22W
22L
GROUP 19 & 23: CANVAS & STRAPS !!!
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
STRAP for WINDSHIELD TIE DOWN: ---- ---- ---- ---- ---- ---- ---- KS1923 ----100% Cotton web cotton strap with appropriate original dull black plated buckle and tip; secures windshield to hood when in folded down position.
WINDSHIELD STUDS for WWII Dodges (NOS): ---- —— 2W2025 2A2025 2A2025 ---- ---- ---- ----Original NOS black fi nish “turn” head sheet metal screw studs for Dodge 3/4 ton weapons carriers;Original NOS black fi nish “Lift-the-Dot” head sheet machine screw studs for Dodge 1/2 ton weapons carriers.
WINDSHIELD STUDS for WWII Dodges (Replacement): ---- 2W2025-R 2A2025-R 2A2025-R 2A2025-R ---- ---- ---- ----Unoriginal NOS black fi nish “turn” head studs with dual screw hole base studs for Dodge 3/4 ton weapons; Unoriginal NOS black fi nish “Lift-the-Dot” head studs with dual screw hole base studs for Dodge 1/2 ton weapons.
HEADLIGHT COVERS (Pair): 2C2326-X B2326-X 2C2326-X B2326-X B2326-X 2C2326-X 2C2326-X ---- ----Original style covers protect headlights & prevent aerial observation aerial due to glassrefl ection (Optional black-out slot available)..GLOVEBOX SPARE PARTS BAG: B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-XBag carries spare parts such as spark plugs,taillight lenses,etc. in glove or tool box.
ORIGINAL STYLE TOOL BAG: B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-XWWII and post war issue 'envelope' styletool bag; standard issue most vehicles.
RIFLE RACK COVER: B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-XZippered 44" long cover encloseswindshield rifl e rack and fi ts M1 Garand rifl e& others; (specify longer if required)
FILLER NECK LEATHER PAD: ---- 3C0333 ---- 3C0333 3C0333 ---- ---- ---- ----Genuine heavy leather pad usedaround early Dodge gas tank fi ller necks.
2-PIECE JERRY CAN STRAP KIT with Rivets: B1934 B1934 B1934 B1934 B1934 B1934 C1934 C1934 C1934Original factory style 2-piece pre-cut 100% cotton straps rivets directly to can holder B1855.
1-PIECE JERRY CAN REPLACEMENT STRAP: Late fi eld style replacement for factory strap kit. B1934-NC B1934-NC B1934-NC B1934-NC B1934-NC B1934-NC C1934-NC C1934-NC C1934-NCWraps around can holder B1855 No riveting needed.
STANDARD WWII ISSUE DOOR SAFETY STRAPS: 2C1935-BF 2C1935-BF VW1935-B VW1935-B VW1935-B VW1935-B ---- ---- ----Adjustable 100% Cotton vehicle (PAIR FOR FRONT DOORS)
doorway safety strap with original WWII cast 2C1935-BR 2C1935-BRsnap hooks. Typical style issue for almost (PAIR FOR REAR DOORS)
all vehicles in WWII.
EARLY WWII DOOR SAFETY STRAPS: 2C1935-CF 2C1935-CF VW1935-C VW1935-C VW1935-C VW1935-C ---- ---- ----Same as no. B1935-B except has an additional (PAIR FOR FRONT DOORS)
secondary WWII buckle and leather retaining 2C1935-CR 2C1935-CRslides; discontinued early in WWII. (PAIR FOR REAR DOORS)
HOOD BUMPERETTE WELT: ---- 3C1738 ---- 3C1738 3C1738 ---- ---- 5E2038 ----Pre-cut welt for windshield hoodbumperettes; black rivets included.Genuine leather used for Dodges.
BRAKE & CLUTCH LEVER SEALS (Pair): ---- 3C0244 ---- 3C0244 3C0244 ---- ---- ---- ----Heavy composite fl oor seals that stop brake & clutch pedal arm air leakage through fl oorboards.( 1 RPV)
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
23
26
25
25R
27
28
29
33
34
38
35C
35B
44
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
FRONT FENDER WELT KIT: 2C1739-R 3C1739-F 2C1739-R 3C1739-F 3C1739-F 2C1739-R ---- ---- ----Appropriate diameter single beaded welt buffering metal to metal contact between fenders& body.; (1) Kit required per vehicle (1 RPV).
REAR FENDER WELT KIT: 2C1739-R 2C1739-R ---- ---- ---- ---- 2C1739-R ---- ----Appropriate diameter single beaded welt buffering metal to metal contact between fenders& body.; (1) Kit required per vehicle (1 RPV).
VEHICLE SIREN COVER: B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385Cover for Federal Signal Model EGH siren.
OUTER WINDSHIELD CANVAS WEATHERSTRIP: ---- 3C2086-C ---- 3C2086-C 3C2086-C ---- ---- ---- Original style gasket seals bottom of Dodge
windshield frames to body cowl. IN RUBBER: ---- 3C2086-R ---- 3C2086-R 3C2086-R -- ---- ---
REAR CARGO BED SAFETY STRAP: ---- ---- 2W1990 3W1990 3W1990 3W1990 DG1990 DG1990 3W1990 Large heavy duty 100% Cotton strap with snap hooks on both ends.
COLLAPSIBLE WATER BUCKET: B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395 B23952-gallon reinforced pail as seen on almost everyWWII and many post war military vehicles.
COLLAPSIBLE WATER PITCHER (RARE!): B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 Uncommon canvas pitcher stowed in the glove or tool box; used to fi ll radiators. Really rare & handy!
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
ALL TRUCK STRAPS, WELTS, BOOTS, & FASTENERS
62
50
63
74
64
83
82
76
75
95
90
98
39F
39R
42C 42R
85 86C
86R
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 67C
CAB TOP Assembly with Optional Flaps & Zippers.........DK2309-XCARGO TARPAULIN with Optional Flaps & Ropes ........ DK2307-XSPLASH CURTAIN; Rear with Optional Reinforcements ...... DK2313-XROPE KIT; Cargo Tarp Tie Down & Life Lines ................ DK1910-RTOOL BAG mounted in Engine Compartment .................. DK2330POUCH, DRIVER'S SEAT for Manuals & Documents ..... DK2382STRAP SET, Boat Hook Tie Down .................................... DK1920-BSTRAP SET, Bildge Pump Tie-Down ................................ DK1920-PSTRAP, Anchor Tie Down .................................................. DK1920-ASTRAP SET, Spotlight Tie Down (You supply hold down ring) ............ DK1920-SSTRAP SET, Pioneer Tool Tie Down ................................. DK1920STRAP, Jerry Can Strap 2-piece Tie Down (Rivets to holder) ... B1934STRAP, Jerry Can Strap 1-piece Tie Down (No riveting required) . B1934-NCCOVERS, Headlight (Pair) .................................................2C2326
CUSHION SET, Complete DELUXE (Set of 8 cushions) .......................GPA2301INSTALLATION KIT for the original style seat cushions .......................GPA2303COVER, COCKPIT Tonneau ...................................................................GPA2309ROPE KIT for the Tonneau Cover ............................................................GPA2309-RDISPATCH POUCH, ZIPPERED (Mounted inside cockpit) ...................GPA2311CURTAINS, SPLASH with optional spring mounting hardware .............GPA2307-XCOVER, WINDSHIELD "FACE" with optional markings & stars .........GPA2314STRAP SET, Ax & Shovel Tie Down (Pioneer Tools) .............................GPA1920COVERS, HEADLIGHT (Pair) ................................................................B2326-XWELT KIT, WINDSHIELD Inner Rubber ...............................................B2042-RWELT KIT, WINDSHIELD Inner Canvas ...............................................B2042-CWELT KIT, WINDSHIELD Outer Lower Rubber ..................................GPA2086-RWELT KIT, WINDSHIELD Outer Lower Canvas ...................................GPA2086-CFASTENER, WINDSHIELD; Original "push button" style (11 required per vehicle) .......B2025-BFASTENER, SEAT STUD; Original Front Seat Pan Studs (4 required per vehicle) .........GPA1825-SSTRAP, Jerry Can Strap 2-piece Tie Down (Rivets to holder) .........................B1934STRAP, Jerry Can Strap 1-piece Tie Down (No riveting required) .......................GPA1920STRAP, Anchor Tie Down ........................................................................GPA1920-ACOVER, MIRROR ...................................................................................B2375-XBAG, SPARE PARTS ...............................................................................B2327-XBAG, TOOL ..............................................................................................B2328-XBAG, Tire Chain Bag (2 required per vehicle) .........................................GPA2376
NOTE: THESE RELICA AMPHIBIAN CUSHIONS ACCURATELY DUPLICATE OLD PRESERVER DESIGNS AND ARE NOT APPROVED FUNCTIONAL PRESERVERS. THEY ARE ONLY INTENDED FOR ANTIQUE AUTO SHOWS ON LAND. YOU SHOULD CARRY COAST GUARD APPROVED PRESERVERS WHEN ACTUALLY USING YOUR AMPHIBIAN. WE
TAKE NO RESPONSILITY FOR MISUSE OF THESE CUSHIONS AS REAL PRESERVERS.
ORIGINAL STYLE FUNCTIONAL STYLECUSHION SET (4 pieces; equips one DUKW) ............................................DK2301 ........................................................................ DK2301-R
Build your custom AMPHIBIAN REPLICA "LIFE PRESERVER" CUSHION SET
CAB, CARGO, END CURTAINS and STRAP SETS
ONLINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com Otherwise please e-mail, fax or call us for current pricing!
Each authentic DELUXE wrapped foam cushion (simulating the old style original "kapok" stuffi ng) includes such features as black hardware, life straps stenciled with "LIFE PRESERVER", simulated olive drab leather, original style stitching, and cushion attaching tabs. (All cushions above can be quoted in genuine olive leather.) Our windshield cover, tonneau cover, dispatch pouch, and splash curtains spare no detail by using use our mil-spec canvas, heavy zippers, issue FORD MOTOR COMPANY stenciling (where ap-propriate), and instructions where if needed.
Our beautifully crafted cab and cargo covers with optional detailing are exact duplicates of the original GMC canvas components and parts. Cargo cover and splash curtain optional features include original style reinforcements, mil-spec black grommets, fasteners, buckles, issue stenciling, ‘manila’ casing rope, lifeline and tie-down rope web and ring guides, notched hull clearance corners, and surf curtain rope clearances. Cab top optional features include contoured fi t for original ring mount cab bows, roped rear curtain, full reinforcements, and NOS GMC DUKW windshield zippers. For economy, we also supply the same covers without some options which eliminate un-necesary lifeline holddowns, web, leather, and zippers, yet overall appearance is maintained.
These original-style replica simulated non-functional "life preserver" cushions include features such as the cushion straps stenciled in white LIFE PRESERVER lettering & GMC or US Government markings as per mil-specs. Read the GPA cushion information below for more details!
GROUP 19 & 23: FORD GPA COVERS, CUSHIONS, STRAPS & FASTENERS
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 68C
TOPS, BAGS, KITS, CURTAINS: SCOUT CAR HALFTRACKCOVER, Driver's Cab Compartment Only; Tonneau SC2308-T ............HT2308-TTRAILRUN Top ..........................................................SC2308 ...............HT2308(No Rear or Side Roll-up Panels; Weather Flaps, or Antennae Boots)
DELUXE Top ..............................................................SC2309 ...............HT2309(Has Roll-up Rear fl ap, M5 has Zippered Side Panels; M3 has Roll-up
Side Panels; all Weather Flaps & One Zippered Antennae Cap)
Door Curtains (Pair) .....................................................SC2312 ...............HT2312Door Curtain Stowage Bag ..........................................SC2385 ...............SC2385Top Assembly Stowage Bag ........................................SC2387 ...............SC2387Side Skate Rail Pad with Straps ...................................SC2384-S ............HT2384-SRear Skate Rail Pad with Straps ..................................SC2384-R ...........SC2384-RRadiator Hair Kit ..........................................................SC1732 ...............SC1732Hood Welt Kit ..............................................................SC1719 ...............SC1719Rear Canvas Mud Flaps (pair) .....................................SC2383 ...............SC2383Winch Cover ................................................................ ------ ....................CK2374
STRAPS SETS:Web Pioneer Tool Straps (set of 3) .............................VC1920-W ..........VC1920-WLeather Pioneer Tool Straps (set of 3) ........................VC1920-L ...........VC1920-LWeb Camofl auge Net Stowage Straps .........................SC1937-W ..........SC1937-WLeather Camoufl age Net Stowage Straps ....................SC1937-L ............SC1937-LTop Bow Support Straps (TRAILRUN or DELUXE) .SC1917 ...............SC1917
SEAT BOTTOM CUSHIONS with optional zippers & inserts : (front seats or rear compartment) ................................SC2302-2X .........SC2302-2X
SEAT UPPER COVERS (COVER ONLY)*: Driver or Passenger Seat Upper Cover ........................SC2302-1X .........SC2302-1XFront Jump Seat Upper Cover ...................................... --------- ................HT2302-1J-XRear Fuel Tank Back Rest Cover ................................. --------- ................HT2302-5FT-XRear Fuel Tank Back Rest Cushion ............................. --------- ................HT2301-5FT-X
*We will gladly quote prices for recovering your or our plywood backs. Seat cushion and upholstering prices for your particular rear compartment arrangement, or for additional antennae caps are also available.
COVER, 30 CAL MACHINE GUN WITH 30/50 CRADLE & AMMO CAN ................................................ B2386-ACOVER, 30 CAL MACHINE GUN WITH M48 PINTLE MOUNT & NO AMMO CAN............................ B2386-NACOVER, 30 CAL MACHINE GUN WITH M48 PINTLE MOUNT WITH DIRECT MOUNT AMMO CAN ... B2386-ADMCOVER, 50 CAL MACHINE GUN WITH 30/50 CRADLE & AMMO CAN ............................................... B2387-ACOVER, 50 CAL MACHINE GUN WITH MOUNT WITHOUT AMMO CAN ............................................ B2387-NACOVER, RIFLE RACK ZIPPERED ................................................................................................................. B2329
WE HAVE PATTERNS FOR OTHER RADIO SETS AND WEAPONS. SIGNAL SOME OF YOUR NEEDS TO US!
ORDNANCE, RADIO, ANTENNAE & MAST BASE BAGS & COVERS
BG-153 RADIO COVER: ........................................... ............................ORDER NO. B23153-XAccurate duplicate of the BG-153 cover used on WWII radio sets SCR-509, 609, 510, 610 and ra-dio mounting base. Features include optional heavy duty zippers (4), black fasteners, Signal Corps stenciling, and front and back fl aps.
BG-56 MAST SECTION CASE: ................................ ............................ORDER NO. B2396Another nice reproduction of the original BG-56 bag, which stores all 5 lengths of MS antennae section used with the MP48/48A antennae base.
BG-108 ANTENNAE BASE COVER: ....................... ............................ORDER NO. B23108Original style canvas bag BG-108 for the WWII MP48/48A antennae base.
Build your custom TOP, STRAPS, ACCESSORIES, & SEAT COVER or CUSHION SET ON-LINE by inserting the base part
number listed here into the "SEARCH FOR" box at
www.beachwoodcanvas.com Otherwise please e-mail, fax or call us
for current pricing!
The Beachwood Canvas White M3 or International M5 Halftrack top and the White M3A1 Scout Car tops are exact replicas of documented original mil-spec issue tops, fully reinforced (where appropriate with leather), and constructed with our popular 20 ounce olive drab mil-spec canvas. The M3/M5 Halftack top or M3A1 Scout Car top contains such optional original features as a zippered antennae cap, rear roll-up fl ap, and side roll-up fl aps (M3 or M3A1) or zippered half moon openings (M5). Mil-spec strap and buckle assemblies (96 total for an M3/M5, and 64 for the M3A1) using original style WWII era buckles secure the top, roll-ups, and panels. All canvas hardware and buckles are supplied with a military black plated fi nish. Door curtains are constructed with metal stiffeners and heavy gauge D.O.T. approved vinyl safety windows. These tops are also offered without certain options in order to reduce the top’s price for the budget minded. Quotes for M2, M2A1, M3A1, M5A1, or M16 Halftrack tops also available.
GROUP 19 & 23: HALFTRACK & SCOUT CAR SEAT COVERS, STRAPS, & TOPS
~ THESE PAINTS ARE NORMALLY SOLD IN GALLONS BUT ARE ALSO AVAILABLE IN QUARTS. PAINT CHIPS ARE NOT AVAILABLE AT THIS TIME.* THESE STENCILS COME WITH A STAR & "BROKEN" INVASION CIRCLE. IF YOU NEED A PLAIN STAR, JUST CUT OR MASK OFF THE CIRCLE PART.
GALLONS OF PAINT ARE CONSIDERED HAZARDOUS BY CARRIERS AND WILL INCUR AN EXTRA FEE TO SHIP BY GROUND IN THE CONTINENTAL UNITED STATES. SPRAY CANS ARE NOT CONSIDERED HAZARDOUS AND DO NOT
INCUR THE FEE. ANY PAINT LISTED ABOVE CANNOT BE SHIPPED BY AIR DOMESTICALLY OR OUT OF THE USA.
PLATE, BRIDGE WWII STYLE WITH ALPHA-NUMERIC PACK (YELLOW)...................FOR ALL MID-SIZE MILITARY JEEPS.................................................................B2115
"MILITARY JEEP RESTORATION (3) VHS CASSETTES THAT GIVES YOU A GREAT OVERVIEW OF MB/GPW RESTORATION.............................V-B0000-VHS
"MILITARY JEEP RESTORATION (3) DVD DISCS THAT GIVE YOU A GREAT OVERVIEW OF MB/GPW RESTORATION..........................................V-B0000-DVD
~ B2640 IS A MULTI-MANUAL COMPILATION OF ORIGINAL REPRODUCTIONS OF MARKING MANUALS FROM 1942 TO 1964. INCLUDES DRAWINGS & EXAMPLES OF HOW TO MARK VEHICLES WITH ORIGINAL UNIT & NATIONAL MARKINGS.
* THESE MANUALS ARE INEXPENSIVE LARGE MULTI-MANUAL SOFT COVER COMPILATIONS OF ALL STANDARD WAR MANUALS INCLUDING: MAINTENANCE, ENGINE & CLUTCH, POWERTRAIN, BODY, FRAME, & CHANGE ORDERS INTENDED FOR YOUR USE AS A SHOP MANUAL THAT YOU DO NOT HAVE TO WORRY ABOUT GETTING DIRTY!
** B2605 COMPLETE CROSS REFERENCE OF MA, MB, 1/4 TON TRAILERS. G2605 IS A COMPLETE CROSS REFERENCE OF ALL FORD COMPONENTS.@ PRINTS OF ORIGINAL SESSIONS PAINTINGS OF MB/GPW JEEPS USED IN LIFE MAGAZINE ADVERTISEMENTS DURING WWII.
+ USEFUL GUIDE TO RESTORATION OF MB & GPW JEEP ^ PARTS LISTING UP TO 1945,ORD9-SNLG503B2502
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 71C
7 InchDiameter
WWII Metal BridgePlates!
GROUP 26: MANUALS & PRINTED MATERIAL
AluminumSilhouette RoadCrossing Signs
for Your Favorite Vehicle!B2115
BULK MAIL
PERMIT NO.
97 PAID
ISLAND
HEIGHTS, NJ
08732-0137
WE ARE YOUR ONLY CANVAS SOURCE CERTIFIED AS AN APPROVED CONTRACTOR FOR THE
US GOVERNMENT DEPARTMENT OF DEFENSE!
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights ReservedDepictions & photographs in this catalog are the sole and exclusive property of Beachwood Canvas Works.They may not be used or reproduced without express written permission from Beachwood Canvas Works.
*JEEP is a registered trademark of the Chrysler Corporation
BEACHWOOD CANVAS WORKSANTIQUE MILITARY & OFF ROAD VEHICLE SPECIALISTS
39 LAKE AVENUE P.O. BOX 137ISLAND HEIGHTS, NEW JERSEY U.S.A. 08732-0137
PHONE: (732)-929-3168 FAX: (732)-929-3479R
WE CAN'T LIST IT ALL IN THIS GUIDE, SO IF YOU NEED CANVAS FOR :M20 BSA , WLA & WLC MOTORCYCLE; M422 & M422A1 MIGHTY MITE JEEP; FERRET SCOUT CAR; M170 , M718,
WC54, M725, & M43 AMBULANCES; M42 COMMAND VERSION OF THE M37; FORD GTB BOMB & CARGO TRUCKS; M29 & M29C WEASELS; M3 & M5 STUART, AND OTHER TANKS; M8 & M20 ARMOURED CARS., FORD GP, BANTAM
BRC, WILLYS MA, CROSLEY PUP, & MORE!.........WE WILL BE PLEASED TO PROVIDE SEPARATE QUOTES OR INFORMATION!
Zinc on Black, Brass on Black, or Specials!Display "Plates" include the manufacturer's logo, vital vehicle statistics, your name as the
owner, your VIN serial number, & your date of delivery! (Order No. ALL2650 or ALL2651)