-
From DocWiki
This document covers Cisco Business Edition 6000 Release
9.x.
Cisco Business Edition 6000 supports full-featured redundancy
for all the core applications over a WAN or LAN environmentand
running co-resident applications on single UCS C220 hardware
platform.
1 What you receive in the box2 Factory Installed3 Pre-loaded
Installation Media4 BE 6000 Server Options5 Co-Residency and the
applications that could be installed6 Power on the UCS C220M3
Server7 Next step: Accessing Virtual Machine8 Deploy OVA template
and creating VM
8.1 Deploying OVA for CUCM application8.2 Deploying OVA for CUC
application8.3 Deploying OVA for Cisco IM and Presence
application8.4 Deploying OVA for Provisioning application
8.4.1 UPM BE application8.4.2 Prime Collaboration Provisioning
application
8.5 Deploying OVA for UCCX application8.6 Deploying OVA for CER
application8.7 Deploying OVA for VCS-C application
8.7.1 Deploying OVA file8.8 Deploying OVA for Cisco Paging
application
9 Application Installation9.1 Recommended Installation
Practice9.2 Installing CUCM 9.09.3 Installing Cisco Unity
Connection 9.09.4 Installing Cisco IM and Presence 9.09.5
Installing CUPM 9.0BE9.6 Installing Cisco Prime Collaboration
Provisioning 9.x9.7 Installing Cisco Unified Contact Center Express
9.09.8 Installing Cisco Emergency Responder 9.09.9 Installing Cisco
TelePresence VCS9.10 Installing Cisco Paging application
10 Disaster Recovery
UCS C220M3 ServerPower SupplyQuick Start GuideVMware Hypervisor
ESXi licenseProduct Authorization Key (PAK) code for VCS, if
ordered.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
1 of 40 2/14/2014 5:20 PM
-
Note: No user licenses are shipped with the hardware bundle.
Note: Cisco Emergency Responder, shipped separately if licenses
are ordered.
Note: The installation media kit for all the UC applications can
be ordered, if needed. Cisco TelePresence VideoCommunication Server
and Cisco Paging Server installation media is not shipped, it is
available online for download.
VMware ESXi Hypervisor 5.1 is installed (and licensed).RAID and
BIOS settings are properly configured
Installation media (.iso and .ova files) are pre-loaded in the
datastore:Cisco Unified Communication ManagerCisco Unity
ConnectionCisco IM and PresenceCisco Prime Collaboration
ProvisioningCisco Contact Center ExpressCisco Emergency
ResponderCisco TelePresence Video Communication ServerCisco Paging
Server
Cisco Offers the following server options for BE 6000:
Medium Density (MD) High Density (HD)Number of applications 4 UC
+ 1 Provisioning 8 UC + 1 ProvisioningCapacity 1000 users/1200
devices 1000 users/2500 devices
CPU 2 x 2.4 GHz E5-2609/80W 4C/10MB Cache/DDR31066MHz2 x 2.4 GHz
E5-2665/115W 8C/20MB Cach1600MHz
RAM 4x8GB 6x8GBDisk 4 x 500GB 8 x 300GBRAID Mega RAID 9266-8i +
battery backup Mega RAID 9266-8i + battery backupPSU 1 x 650W 2 x
650WVMware Hypervisor Edition 2 CPU sockets, vRAM unrestricted
Hypervisor Edition 2 CPU sockets, vRAM uStarter HW bundle SKU
BE6K-ST-BDL-K9= BE6K-STBDL-PLS-K9=
Various application combinations are allowed if it fits memory
and processing specifications. On various applicationsco-residency
support, please go to
http://www.cisco.com/en/US/products/ps11369/prod_white_papers_list.html
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
2 of 40 2/14/2014 5:20 PM
-
Supported applications listed with the requirements:
Application Scale vCPU vRAM vDisk Preloaded1 CUCM 1000 users 2 4
1x80G Yes2 CUC 1000 users 1 4 1x160G Yes3 CUPM BE 1000 users 1 2
1x30G No4 PCP 1000 users 1 2 1x90G Yes5 CUP 1000 users 1 2 1x80G
Yes6 CUxAC 50 clients 1 4 1x72G No7 CCX 100 Agents 2 4 1x146G
Yes
8 VCS
100 traversalandnon-traversalcalls
2 4 1x128G Yes
9 CER 1000 users 2 4 1x80G Yes10 Paging 1000 users 1 4 1x80G
Yes
For Medium Density (MD) server, co-residency policy supports for
any 4 UC applications and 1 Provisioning application aslong as they
fit in 8vCPU and 32GvRAM.For High Density (MD) server, co-residency
policy supports for any 8 UC applications and 1 Provisioning
application as longas they fit in 16vCPU and 48GvRAM.
1vCPU should be reserved for ESXi scheduler if CUC is deployed
in a VM.
Note: You must install only one of the provisioning
applications.
Connect a USB keyboard and VGA monitor by using the supplied KVM
cable connected to the KVM connector on thefront panel.
Power on the server and let it boot up.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
3 of 40 2/14/2014 5:20 PM
-
Press F2 key to configure VMware ESXi Hypervisor 5.
Enter default Login Name as root and Password as password. Press
Enter.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
4 of 40 2/14/2014 5:20 PM
-
To change the default password, select Configure Password. Enter
the Old Password and New Password. Press Enter.
Select Configure Management Network and press Enter key.
Select IP Configuration and press Enter key
By default, the IP address is set to DHCP. To set Static IP
address, select Set static IP address and enter IP Address,Subnet
Mask and Default Gateway and press Enter key.
Enter VLAN (optional) if needed.
Press Esc key to Exit.
Press Y to apply changes and restart management network.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
5 of 40 2/14/2014 5:20 PM
-
Press Esc key to log out
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
6 of 40 2/14/2014 5:20 PM
-
Connect NIC-1 on the back of the UCS C220M3 server to your
network.
Connect a Windows PC in the same network as UCS C220M3 server
and make sure you are able to ping it.
Download and install VMware vSphere Client from ESXi host
(http://). Click on DownloadvSphere Client.
Note: The Windows PC should have access to Internet. Currently
there is no vSphere client available for MAC OS.
Launch the vSphere Client and enter IP address, User name and
Password configured in previous step. Click Login.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
7 of 40 2/14/2014 5:20 PM
-
Click on the server IP address to highlight it.
To configure the VM Host with a valid NTP server, click on
Configuration > Software > Time Configuration
andProperties.
Note: Some of the applications if installed would require NTP
settings, for example Cisco Telepresence VideoCommunication
Server.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
8 of 40 2/14/2014 5:20 PM
-
If the date and time are red, then set the date and time
manually to the current time.
Click Options. Select NTP Settings and click Add.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
9 of 40 2/14/2014 5:20 PM
-
Enter the IP address of the NTP server. Click OK.
Select the Restart NTP service to apply changes check box.
Click OK twice.
The Date & Time should be synchronized with the NTP
server
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
10 of 40 2/14/2014 5:20 PM
-
Click on the Configuration tab and then select Storage under
Hardware section. Right click on the datastore1 andchoose Browse
Datastore. All the application ISO images and OVA templates
supported will be placed in the datastore.
In order to deploy OVA, you must download the OVA file to the
desktop. From the datastore1, download the required
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
11 of 40 2/14/2014 5:20 PM
-
OVA template files to the desktop.
Note: To download OVA files, around 5 GB of disk space is
required on the local drive.
Deploy the OVA template for the applications that you are
planning to installs.
Deploying OVA for CUCM application
On the main tab in vSphere client, go to File > Deploy OVF
template
On the Source screen, Browse to the CUCM OVA file on the local
desktop and click on Open. Click Next.
On the OVF Template Details screen, click Next.
On the Name and Location screen, click Next.
On the Deployment Configuration, select CUCM 1000 user node C200
(including BE6000). Click Next.
Note: Even it says C200, this will also be used for C220
Server.
For Disk Format, choose Thick Provision Lazy Zeroed. Click
Next.
Check the summary of Deployment Settings. Click Finish.
Click on + sign next to host server IP address and select the
virtual machine. Right click on the virtual machine toEdit
Settings.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
12 of 40 2/14/2014 5:20 PM
-
Under Hardware tab, select CD/DVD drive 1.
Under Device Type, choose Datastore ISO File option. Browse to
the datastore1 and select ISO file for CUCM andclick OK.
Under Device Status, check the box Connect at power on. Without
selecting this option, the ISO file will not loadwhen the
application is POWER ON.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
13 of 40 2/14/2014 5:20 PM
-
Deploying OVA for CUC application
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
On the Deployment Configuration, select 1000 users. Click
Next.
Deploying OVA for Cisco IM and Presence application
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
On the Deployment Configuration, select CUCM IM and Presence
1000 (BE6K only). Click Next.
Deploying OVA for Provisioning application
Note: Only one of the Provisioning applications MUST be
installed.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
14 of 40 2/14/2014 5:20 PM
-
UPM BE application
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
Click on + sign next to host server IP address and select the
virtual machine. Right click on the virtual machine toEdit
Settings. Under Hardware tab, select network adapter. Under MAC
Address, select Manual option and changethe MAC address to
00:50:56:11:11:11. Click OK.
Under Device Status, make sure the box is checked Connect at
power on. Without selecting this option, the imagefile will not
load when the application is POWER ON.
Prime Collaboration Provisioning application
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
On the End User License Agreement screen, click Accept to accept
the software license agreement. Click Next andcontinue the OVA
deploy.
Deploying OVA for UCCX application
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
Read the End User License Agreement, if acceptable, click Accept
and then click Next.
On the Deployment Configuration, select UCCX 100 Agent. Click
Next.
Deploying OVA for CER application
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
On the Deployment Configuration, select CER 12000 user node
C200. Click Next.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
15 of 40 2/14/2014 5:20 PM
-
Note: Even it says C200, this will also be used for C220
Server.
Deploying OVA for VCS-C application
Ensure that the VM Host is configured with a valid NTP server
the same NTP server that will be specified in VCS.
Deploying OVA file
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
Read the End User License Agreement, if acceptable, click Accept
and then click Next.
Deploying OVA for Cisco Paging application
Most of configuration screens will be same as provide for
Deploying OVA for CUCM. Only the differences are listed here.
Currently BE6000 supports maximum of 5 applications running
simultaneously in virtualized environment. To select
theapplications to be installed, go to 'How the 5 applications can
be installed' section previously.
Recommended Installation Practice
Concurrent application installation is possible to reduce
overall installation time
The applications can be installed in any order
Install CUCM and CUC separately as they share same .iso
image
Installing CUCM 9.0
Note: The installation time for this application is around 1
hour.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco Unified Communication Manager)and press
Power On
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
16 of 40 2/14/2014 5:20 PM
-
Click the Open Console icon to view the virtual machine
display.
For Media check before the installation process, select Yes and
press Enter.
Press OK on the Media Check Result.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
17 of 40 2/14/2014 5:20 PM
-
Select Cisco Unified Communication Manager in the Product
Deployment Screen. Press OK.
Note: Select Cisco Unified Communication Manger, and Cisco
Enterprise License Manager service will also be deployed aspart of
the installation.
Select Yes and press Enter key to Proceed with install.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
18 of 40 2/14/2014 5:20 PM
-
Select Proceed and press Enter key on the Platform Installation
Wizard.
Select No and press Enter key on the Apply Patch screen.
In the Basic Install screen, press Continue
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
19 of 40 2/14/2014 5:20 PM
-
Select the appropriate time zone. Select OK and press Enter
key.
Select Continue and press Enter key for the Auto Negotiation
Configuration
Select the MTU configuration
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
20 of 40 2/14/2014 5:20 PM
-
Select No to keep the default value for MTU and press Enter key.
Skip next step.
Select Yes to change the MTU size. Enter the MTU size and press
Enter key.
Select DHCP configuration option.
If DHCP configuration is set to Yes, next 2 steps in the
installation process will be skipped and go to AdministratorLogin
Configuration screen.
If DHCP configuration is set to No, provide Host Name, IP
Address, IP Mask and GW Address. Select OK and pressEnter.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
21 of 40 2/14/2014 5:20 PM
-
Select appropriate DNS Client Configuration.
Select No to not enter DNS client configuration. Select OK and
press Enter. Skip next step.
Select Yes to enable DNS client. Enter the Primary DNS,
Secondary DNS (optional) and the Domain. Select OK andpress
Enter.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
22 of 40 2/14/2014 5:20 PM
-
Enter Administrator ID and Password. Select OK and press Enter
key.
Enter Certification Information. Select OK and press Enter
key.
Select Yes and press Enter key for First Node Configuration.
Skip next few steps and go to Network Time ProtocolClient
Configuration.
Select No if the server is not the First Node in the cluster.
Press Enter key.
The secondary server will be required when configuring for
redundancy.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
23 of 40 2/14/2014 5:20 PM
-
Press OK.
Select No, to start the installation process after validating
network connectivity to the Primary Node.
Provide First Node access information. Select OK and press Enter
key.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
24 of 40 2/14/2014 5:20 PM
-
Provide a valid NTP server. Select OK and press Enter key. NTP
settings are required for completing the installationprocess.
Provide Security Password. Select OK and press Enter key.
Select the appropriate SMTP Host Configuration.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
25 of 40 2/14/2014 5:20 PM
-
Select No to skip SMTP host configuration. Press Enter. Skip
next step.
Select Yes to enter SMTP host configuration. Enter the SMTP
location. Select OK and press Enter.
Enter Application User Username and Application User Password.
Select OK and press Enter key.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
26 of 40 2/14/2014 5:20 PM
-
Select OK and press Enter key to start the installation
process.
After the installation process is complete, login screen will be
displayed.
Installing Cisco Unity Connection 9.0
Note: The installation time for this application is around 1
hour.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco Unity Connection) and pressPower On
Click the Open Console icon to view the virtual machine
display.
For Media check before the installation process, select Yes and
press Enter.
Press OK on the Media Check Result.
Select Cisco Unity Connection in the Product Deployment Screen.
Press OK.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
27 of 40 2/14/2014 5:20 PM
-
Select Yes and press Enter key to Proceed with install.
Select Proceed and press Enter key on the Platform Installation
Wizard.
Select No and press Enter key on the Apply Patch screen.
In the Basic Install screen, press Continue
Select the appropriate time zone. Select OK and press Enter
key.
Select Continue and press Enter key for the Auto Negotiation
Configuration
Select the MTU configurationSelect No to keep the default value
for MTU and press Enter key.Select Yes to change the MTU size.
Enter the MTU size and press Enter key.
Select DHCP configuration option.If DHCP configuration is set to
Yes, next 2 steps in the installation process will be skipped and
go toAdministrator Login Configuration screen.If DHCP configuration
is set to No, provide Host Name, IP Address, IP Mask and GW
Address. Select OK andpress Enter.
Note: The IP address provided for Static Network Configuration
should be different for each application residing on
thisserver.
Select appropriate DNS Client Configuration.Select No to not
enter DNS client configuration. Select OK and press Enter. Skip
next step.Select Yes to enable DNS client. Enter the Primary DNS,
Secondary DNS (optional) and the Domain. SelectOK and press
Enter.
Enter Administrator ID and Password. Select OK and press Enter
key.
Enter Certification Information. Select OK and press Enter
key.
Select the First Node ConfigurationSelect Yes and press Enter
key for First Node Configuration. Skip next few steps and go to
Network TimeProtocol Client Configuration.Select No if the server
is not the First Node in the cluster. Press Enter key.
The secondary server will be required when configuring for
redundancy.
Press OK.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
28 of 40 2/14/2014 5:20 PM
-
Select No to start the installation process after validating
network connectivity to the Primary Node.
Provide First Node access information. Select OK and press Enter
key.
Provide a valid NTP server. Select OK and press Enter key.
Provide Security Password. Select OK and press Enter key.
Select the appropriate SMTP Host Configuration.Select No to skip
SMTP host configuration. Press Enter. Skip next step.Select Yes to
enter SMTP host configuration. Enter the SMTP location. Select OK
and press Enter.
Enter Application User Username and Application User Password.
Select OK and press Enter key.
Select OK and press Enter key to start the installation
process.
After the installation process is complete, login screen will be
displayed.
Installing Cisco IM and Presence 9.0
Note: The installation time for this application is around 45
minutes.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco IM and Presence) and pressPower On
Click the Open Console icon to view the virtual machine
display.
For Media check before the installation process, select Yes and
press Enter.
Press OK on the Media Check Result.
Select Cisco Unified Communication Manager IM and Presence in
the Product Deployment Screen. Press OK.
Select Yes and press Enter key to Proceed with install.
Select Proceed and press Enter key on the Platform Installation
Wizard.
Select No and press Enter key on the Apply Patch screen.
In the Basic Install screen, press Continue
Select the appropriate time zone. Select OK and press Enter
key.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
29 of 40 2/14/2014 5:20 PM
-
Select Continue and press Enter key for the Auto Negotiation
Configuration
Select the MTU configurationSelect No to keep the default value
for MTU and press Enter key.Select Yes to change the MTU size.
Enter the MTU size and press Enter key.
Select DHCP configuration option.If DHCP configuration is set to
Yes, next 2 steps in the installation process will be skipped and
go toAdministrator Login Configuration screen.If DHCP configuration
is set to No, provide Host Name, IP Address, IP Mask and GW
Address. Select OK andpress Enter.
Note: The IP address provided for Static Network Configuration
should be different for each application residing on
thisserver.
Select appropriate DNS Client Configuration.Select No to not
enter DNS client configuration. Select OK and press Enter. Skip
next step.Select Yes to enable DNS client. Enter the Primary DNS,
Secondary DNS (optional) and the Domain. SelectOK and press
Enter.
Enter Administrator ID and Password. Select OK and press Enter
key.
Enter Certification Information. Select OK and press Enter
key.
Select the First Node ConfigurationSelect Yes and press Enter
key for First Node Configuration. Skip next few steps and go to
Network TimeProtocol Client Configuration.Select No if the server
is not the First Node in the cluster. Press Enter key.
The secondary server will be required when configuring for
redundancy.
Press OK.
Select No to start the installation process after validating
network connectivity to the Primary Node.
Provide First Node access information. Select OK and press Enter
key.
Provide a valid NTP server. Select OK and press Enter key.
Provide Security Password. Select OK and press Enter key.
Select the appropriate SMTP Host Configuration.Select No to skip
SMTP host configuration. Press Enter. Skip next step.Select Yes to
enter SMTP host configuration. Enter the SMTP location. Select OK
and press Enter.
Enter Application User Username and Application User Password.
Select OK and press Enter key.
Select OK and press Enter key to start the installation
process.
After the installation process is complete, login screen will be
displayed.
Installing CUPM 9.0BE
Note: The installation time for this application is around 30
minutes.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco Unified Provisioning Manager)and press Power
On
Click the Open Console icon to view the virtual machine
display.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
30 of 40 2/14/2014 5:20 PM
-
At the local host login prompt, enter setup.
Enter the following information at the console prompts:Hostname
of the VM instanceIP addressIP default netmaskIP default
gatewayDefault DNS domainPrimary nameserver: To enter another name
server, enter y at the next prompt.Primary NTP server
[time.nist.gov]:To enter a secondary NTP server; enter y at the
next prompt.Timezone [UTC]Username [admin]: Administrative username
for logging into the Linux server at the shell prompt.Password:
Password for logging into the Linux server at the shell prompt.
Enter the passwords for pmadmin, postgres and root.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
31 of 40 2/14/2014 5:20 PM
-
After the installation process is complete, login screen will be
displayed.
Installing Cisco Prime Collaboration Provisioning 9.x
Note: The installation time for this application is around 30
minutes.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco Prime Collaboration Provisioning)and press
Power On
Click the Open Console icon to view the virtual machine
display.
At the local host login prompt, enter setup.
Enter the following information at the console prompts:Hostname
of the VM instanceIP addressIP default netmaskIP default
gatewayDefault DNS domainPrimary nameserver: To enter another name
server, enter y at the next prompt.Primary NTP server
[time.nist.gov]:To enter a secondary NTP server; enter y at the
next prompt.Timezone [UTC]Username [admin]: Administrative username
for logging into the Linux server at the shell prompt.Password:
Password for logging into the Linux server at the shell prompt.
Enter the passwords for root and globaladmin.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
32 of 40 2/14/2014 5:20 PM
-
After the installation process is complete, login screen will be
displayed.
Installing Cisco Unified Contact Center Express 9.0
Note: The installation time for this application is around 1
hour.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco Unified Contact Center Express)and press
Power On
Click the Open Console icon to view the virtual machine
display.
For Media check before the installation process, select Yes and
press Enter.
Press OK on the Media Check Result.
Select Cisco Unified Contact Center Express in the Product
Deployment Screen. Press OK.
Select Yes and press Enter key to Proceed with install.
Select Proceed and press Enter key on the Platform Installation
Wizard.
Select No and press Enter key on the Apply Patch screen.
In the Basic Install screen, press Continue
Select the appropriate time zone. Select OK and press Enter
key.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
33 of 40 2/14/2014 5:20 PM
-
Select Continue and press Enter key for the Auto Negotiation
Configuration
Select the MTU configurationSelect No to keep the default value
for MTU and press Enter key.Select Yes to change the MTU size.
Enter the MTU size and press Enter key.
Enter the Static Network Configuration by providing Host Name,
IP Address, IP Mask and GW Address. Select OKand press Enter.
Enter the appropriate DNS Client Configuration by providing
Primary DNS, Secondary DNS (optional) and theDomain. Select OK and
press Enter.
Select appropriate DNS Client Configuration.Select No to not
enter DNS client configuration. Select OK and press Enter. Skip
next step.Select Yes to enable DNS client. Enter the Primary DNS,
Secondary DNS (optional) and the Domain. SelectOK and press
Enter.
Enter Administrator ID and Password. Select OK and press Enter
key.
Enter Certification Information. Select OK and press Enter
key.
Select the First Node ConfigurationSelect Yes and press Enter
key for First Node Configuration. Skip next few steps and go to
Network TimeProtocol Client Configuration.Select No if the server
is not the First Node in the cluster. Press Enter key.
The secondary server will be required when configuring for
redundancy.
Press OK.
Select No to start the installation process after validating
network connectivity to the Primary Node.
Provide First Node access information. Select OK and press Enter
key.
Provide a valid NTP server. Select OK and press Enter key.
Provide Security Password. Select OK and press Enter key.
Select the appropriate SMTP Host Configuration.Select No to skip
SMTP host configuration. Press Enter. Skip next step.Select Yes to
enter SMTP host configuration. Enter the SMTP location. Select OK
and press Enter.
Enter Application User Username and Application User Password.
Select OK and press Enter key.
Select OK and press Enter key to start the installation
process.
After the installation process is complete, login screen will be
displayed.
Installing Cisco Emergency Responder 9.0
Note: The installation time for this application is around 45
minutes.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco Emergency Responder) and pressPower On
Click the Open Console icon to view the virtual machine
display.
For Media check before the installation process, select Yes and
press Enter.
Press OK on the Media Check Result.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
34 of 40 2/14/2014 5:20 PM
-
Select OK in the Product Deployment Screen.
Select Yes and press Enter key to Proceed with install.
Select Proceed and press Enter key on the Platform Installation
Wizard.
In the Basic Install screen, press Continue
Select the appropriate time zone. Select OK and press Enter
key.
Select the MTU configurationSelect No to keep the default value
for MTU and press Enter key.Select Yes to change the MTU size.
Enter the MTU size and press Enter key.
Enter the Static Network Configuration by providing Host Name,
IP Address, IP Mask and GW Address. Select OKand press Enter.
Enter the appropriate DNS Client Configuration by providing
Primary DNS, Secondary DNS (optional) and theDomain. Select OK and
press Enter.
Enter Administrator ID and Password. Select OK and press Enter
key.
Enter Certification Information. Select OK and press Enter
key.
Select the First Node ConfigurationSelect Yes and press Enter
key for First Node Configuration. Skip next few steps and go to
Network TimeProtocol Client Configuration.Select No if the server
is not the First Node in the cluster. Press Enter key.
The secondary server will be required when configuring for
redundancy.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
35 of 40 2/14/2014 5:20 PM
-
Press OK.
Select No to start the installation process after validating
network connectivity to the Primary Node.
Provide First Node access information. Select OK and press Enter
key.
Provide a valid NTP server. Select OK and press Enter key.
Provide Security Password. Select OK and press Enter key.
Select the appropriate SMTP Host Configuration.Select No to skip
SMTP host configuration. Press Enter. Skip next step.Select Yes to
enter SMTP host configuration. Enter the SMTP location. Select OK
and press Enter.
Select OK and press Enter key to start the installation
process.
Enter the Emergency Number, 911 for US. The emergency number
will be different for different countries. SelectCUCM version as
9.0. Select OK and press Enter key.
Select the End user language as appropriate in the Localization
Settings page. Select OK and press Enter key.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
36 of 40 2/14/2014 5:20 PM
-
Enter Application User Username and Application User Password.
Select OK and press Enter key.
Select OK and press Enter key to start the installation
process.
After the installation process is complete, login screen will be
displayed.
Installing Cisco TelePresence VCS
Note: The installation time for this application is around 1
hour.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Video Communication Server) and pressPower On
Click the Open Console icon to view the virtual machine
display.
At the login prompt enter username as admin and password as
TANDBERG
At the Install Wizard prompt, type y and press ENTER key.
If you wish to change the password, type y and press ENTER.
Enter the new password when prompted.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
37 of 40 2/14/2014 5:20 PM
-
Enter the IP protocol to be used Both, IPv4 or IPv6. Default is
IPv4.
Enter the IP address of LAN, Subnet mask and Default Gateway
Address.
Enter Ethernet speed of LAN1. Default setting is auto.
For Run ssh daemon, Enter y.
To apply the new settings by restarting the system. Type y and
ENTER.
After reboot is complete, the VCS could be accessed via web
browser.
For Licensing, please refer to document Installing Licenses on
Cisco Business Edition 6000 server. Link: >
Installing Cisco Paging application
Note: The installation time for this application is around 15
minutes.
Click on + sign next to server IP address. Right click on the
Virtual Machine (Cisco Paging Server) and press PowerOn
Click the Open Console icon to view the virtual machine
display.
Click I Agree to accept End User License Agreement.
On the Network Configuration screen, enter the IP Address,
Netmask, Gateway and DNS Server information. ClickSubmit.
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
38 of 40 2/14/2014 5:20 PM
-
Verify the information and click Finish.
Click OK to finish configuration.
To login through CLI, press ALT+F2 key.
To login through web UI, open a browser and type the URL
(https://:8444/InformaCast)
Note: The login information for CLI and web UI is same with
username as admin and password as changeMe.
To recover from the failure such as the hard disk failure, the
installation of hardware components and the application imageshave
to be performed manually. The steps are provided in the link to
configure any hardware components on the
server.http://docwiki.cisco.com/wiki/Implementing_Cisco_Business_Edition_6000
To get the software images of the VMware ESXi and Cisco Unified
Communications applications, please use the media disksshipped with
the order. Cisco recommends archiving installation files directly
from the hypervisor datastore.
Back to: Cisco Business Edition 6000
Rating: 5.0/5 (11 votes cast)
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
39 of 40 2/14/2014 5:20 PM
-
Related Discussions from the Cisco Support Community
UCS c220 media test failurein IP Telephony
Re: Multiple Transit to ISP designguidein Other Service Provider
Subjects
Re: routering on ipv6in WAN, Routing and Switching
Re: VTPV3in LAN, Switching and Routing
Re: New to LMS 2.2in Network Management
Retrieved from
"http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0"
This page was last modified on 29 August 2013, at 14:49.
1992-2012 Cisco Systems, Inc. All rights reserved. Trademarks
Implementing BE 6000 9.0 - DocWiki
http://docwiki.cisco.com/wiki/Implementing_BE_6000_9.0
40 of 40 2/14/2014 5:20 PM