This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Dimensions (approx.):430 mm × 220 mm × 60 mm(17 in. × 8 3/4 in. × 2 3/8 in.)(width/depth/height) incl. projecting parts
Mass (approx.):2.9 kg (6 3/8 lb)
Operating temperature:5 ºC to 35 ºC (41 °F to 95 °F)
Operating humidity:25 % to 80 %
Supplied accessories
Specifications and design are subject tochange without notice.
Audio/video cable (phono plug ×3) (1)AC power cord (1)
Remote commander (remote) (1)Size AA (R6) batteries (2)
HDMI cable (1) (BDP-BX1)
– –
BDP-BX1/S350
SAFETY CHECK-OUT
LEAKAGE TESTThe AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods.1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers' instructions to use these instruments.
2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)
1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.
5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer.
6. Check the B+ voltage to see it is at the values specified.7. Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage. Check leakage as described below.
After correcting the original service problem, perform the following safety checks before releasing the set to the customer:
1.5 kΩ0.15 µFACvoltmeter(0.75 V)
To Exposed MetalParts on Set
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
WARNING!!WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJEC-TIVE LENS ON THE OPTICAL PICK-UP BLOCK.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉ-MENTS PUBLIÉS PAR SONY.
Unleaded solderBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)
: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder. Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to
about 350°C. Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!• Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.
• Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
CAUTION:The use of optical instrument with this product will increase eye hazard.
CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radia-tion exposure.
2
WARNINGTo reduce the risk of fire or electricshock, do not expose this apparatusto rain or moisture.To avoid electrical shock, do notopen the cabinet. Refer servicing toqualified personnel only.
Batteries or batteries installedapparatus shall not be exposed toexcessive heat such as sunshine,fire or the like.
CAUTIONThe use of optical instruments withthis product will increase eyehazard. As the laser beam used inthis Blu-ray Disc/DVD player isharmful to eyes, do not attempt todisassemble the cabinet.Refer servicing to qualifiedpersonnel only.
This label is located on the laserprotective housing inside theenclosure.
This appliance is classified as aCLASS 1 LASER product. TheCLASS 1 LASER PRODUCTMARKING is located on the laserprotective housing inside theenclosure. (AEP, UK, Australian)
Notice for customers in theUnited Kingdom andRepublic of IrelandA molded plug complying withBS1363 is fitted to this equipmentfor your safety and convenience.Should the fuse in the plugsupplied need to be replaced, a 5AMP fuse approved by ASTA orBSI to BS1362, (i.e., marked with
or mark) must be used.If the plug supplied with thisequipment has a detachable fusecover, be sure to attach the fusecover after you change the fuse.Never use the plug without the fusecover. If you should lose the fusecover, please contact your nearestSony service station.
Disposal of Old Electrical& Electronic Equipment(Applicable in theEuropean Union andother European countrieswith separate collectionsystems)This symbol on the product or onits packaging indicates that thisproduct shall not be treated ashousehold waste. Instead it shall behanded over to the applicablecollection point for the recycling ofelectrical and electronicequipment. By ensuring thisproduct is disposed of correctly,you will help prevent potentialnegative consequences for theenvironment and human health,which could otherwise be causedby inappropriate waste handling ofthis product. The recycling ofmaterials will help to conservenatural resources. For moredetailed information aboutrecycling of this product, pleasecontact your local Civic Office,your household waste disposalservice or the shop where youpurchased the product.
Disposal of wastebatteries (applicable inthe European Union andother European countrieswith separate collectionsystems)This symbol on the battery or onthe packaging indicates that thebattery provided with this productshall not be treated as householdwaste.By ensuring these batteries aredisposed of correctly, you will helpprevent potentially negativeconsequences for the environmentand human health which couldotherwise be caused byinappropriate waste handling of thebattery. The recycling of thematerials will help to conservenatural resources.
In case of products that for safety,performance or data integrityreasons require a permanentconnection with an incorporatedbattery, this battery should bereplaced by qualified service staffonly.To ensure that the battery will betreated properly, hand over theproduct at end-of-life to theapplicable collection point for therecycling of electrical andelectronic equipment.
For all other batteries, please viewthe section on how to remove thebattery from the product safely.Hand the battery over to theapplicable collection point for therecycling of waste batteries.
For more detailed informationabout recycling of this product orbattery, please contact your localCivic Office, your householdwaste disposal service or the shopwhere you purchased the product.
2
WARNINGTo reduce the risk of fire or electricshock, do not expose this apparatusto rain or moisture.To avoid electrical shock, do notopen the cabinet. Refer servicing toqualified personnel only.
Batteries or batteries installedapparatus shall not be exposed toexcessive heat such as sunshine,fire or the like.
CAUTIONThe use of optical instruments withthis product will increase eyehazard. As the laser beam used inthis Blu-ray Disc/DVD player isharmful to eyes, do not attempt todisassemble the cabinet.Refer servicing to qualifiedpersonnel only.
This label is located on the laserprotective housing inside theenclosure.
This appliance is classified as aCLASS 1 LASER product. TheCLASS 1 LASER PRODUCTMARKING is located on the laserprotective housing inside theenclosure. (AEP, UK, Australian)
Notice for customers in theUnited Kingdom andRepublic of IrelandA molded plug complying withBS1363 is fitted to this equipmentfor your safety and convenience.Should the fuse in the plugsupplied need to be replaced, a 5AMP fuse approved by ASTA orBSI to BS1362, (i.e., marked with
or mark) must be used.If the plug supplied with thisequipment has a detachable fusecover, be sure to attach the fusecover after you change the fuse.Never use the plug without the fusecover. If you should lose the fusecover, please contact your nearestSony service station.
Disposal of Old Electrical& Electronic Equipment(Applicable in theEuropean Union andother European countrieswith separate collectionsystems)This symbol on the product or onits packaging indicates that thisproduct shall not be treated ashousehold waste. Instead it shall behanded over to the applicablecollection point for the recycling ofelectrical and electronicequipment. By ensuring thisproduct is disposed of correctly,you will help prevent potentialnegative consequences for theenvironment and human health,which could otherwise be causedby inappropriate waste handling ofthis product. The recycling ofmaterials will help to conservenatural resources. For moredetailed information aboutrecycling of this product, pleasecontact your local Civic Office,your household waste disposalservice or the shop where youpurchased the product.
Disposal of wastebatteries (applicable inthe European Union andother European countrieswith separate collectionsystems)This symbol on the battery or onthe packaging indicates that thebattery provided with this productshall not be treated as householdwaste.By ensuring these batteries aredisposed of correctly, you will helpprevent potentially negativeconsequences for the environmentand human health which couldotherwise be caused byinappropriate waste handling of thebattery. The recycling of thematerials will help to conservenatural resources.
In case of products that for safety,performance or data integrityreasons require a permanentconnection with an incorporatedbattery, this battery should bereplaced by qualified service staffonly.To ensure that the battery will betreated properly, hand over theproduct at end-of-life to theapplicable collection point for therecycling of electrical andelectronic equipment.
For all other batteries, please viewthe section on how to remove thebattery from the product safely.Hand the battery over to theapplicable collection point for therecycling of waste batteries.
For more detailed informationabout recycling of this product orbattery, please contact your localCivic Office, your householdwaste disposal service or the shopwhere you purchased the product.
– 3 –
BDP-BX1/S350
TABLE OF CONTENTS
Section Title Page Section Title Page
1. SERVICE NOTE
1-1. Disc Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection) ............................................. 1-11-2. Attention at installation of harness (DM-146) ............... 1-11-3. Test Disc ....................................................................... 1-2 1-3-1. Operation and Display ............................................. 1-2
Sub_menu1 is displayedTo Main Menu after playback from T2_C1 to T19_C1To Main Menu after playback of T20_C1To Main Menu after playback of T21tT63tT64tT65tT66
Sub_menu3 is displayedTo Main Menu after playback of T54_C1-T60_C1tT83_C1-T94_C1To Main Menu after playback of T61_C1To Main Menu after playback of T62tT82
Sub_menu4 is displayedTo Main Menu after playback from T23_C1 to T40_C1To Main Menu after playback of T41_C1To Main Menu after playback of T42_C1
Sub_menu2 is displayedTo Main Menu after playback of T44_C1-T50_C1tT71_C1-T81_C1To Main Menu after playback of T51_C1To Main Menu after playback of T52_C1tT69
There are a few cases that the part isn’t mounted in this model is printed on this diagram.
: Uses unleaded solder.
5-12. USB-008BOARD(USBCONNECTOR)PRINTEDWIRINGBOARD- Ref. No.: USB-008 board; 20,000 series -•Seepage2-6forcircuitboardslocation.
USB-008 BOARD (SIDE B)
CN361 A-1CN362 A-2
BIA003
5
114
CN361 CN362
A
1 205
USB-008 BOARD (SIDE A)
1-876-897- 11
VDR361A
1 205
USB-008 BOARD (SIDE B)
1-876-897- 11
EXT
6-
BDP-BX1/S350SECTION 6
IC PIN FUNCTION DESCRIPTION
6-1. MAIN SYSTEM CONTROL PIN FUNCTION (MB-124 BOARD IC101: MC-10068F1-207-RNA-A)Pin No. Name I/O Description
A1 VOID - This pin is not ball.A2 VOID - This pin is not ball.A3 VDD3 - 3.3V supply (I/O buffers)A4 PCIAD17 I/O PCI Address DataA5 PCITRDYB I/O PCI Target ReadyA6 GND - Ground for digital and DDR2 SDRAMA7 PCIAD11 I/O PCI Address DataA8 PCIAD5 I/O PCI Address DataA9 VDD3 - 3.3V supply (I/O buffers)A10 GPIO58 I/O VODY6: Digital Video Y Data OutputA11 GPIO68 I/O VODC6: Digital Video Cb/Cr Data OutputA12 GPIO76 I/O AOHBD1: Audio Data output for External HDMIA13 GND - Ground for digital and DDR2 SDRAMA14 SAGNDANA - Analog Ground for Serial ATAA15 SACREFN I SATA Clock Negative Input (0.9V)A16 SAGNDDIG - Digital Ground for Serial ATAA17 SATXN1 O SATA Transport negative port-1 (not used)A18 SAGNDDIG - Digital Ground for Serial ATAA19 SARXP1 I SATA Receiver positive port-1 (not used)A20 SAGNDDIG - Digital Ground for Serial ATAA21 SATXN0 O SATA Transport negative port-0A22 SAGNDDIG - Digital Ground for Serial ATAA23 SARXP0 I SATA Receiver positive port-0A24 SAGNDDIG - Digital Ground for Serial ATAA25 GPIO20 O ASPECT0 (4:3="0" 16:9, 4:3LB="1")A26 GND - Ground for digital and DDR2 SDRAMA27 GPIO14 O ITREQ (Communication Request for ITcon)A28 GPIO4 I No use (Fixed at "L")A29 EJTCK I JTAG I/F_0 Clock InputA30 EJTRSTB I JTAG I/F_0 Reset InputA31 EJDINT I JTAG I/F_0 debug interruptA32 VOID - This pin is not ball.A33 VOID - This pin is not ball.B1 VOID - This pin is not ball.B2 PCIAD23 I/O PCI Address DataB3 PCIAD21 I/O PCI Address DataB4 PCIAD18 I/O PCI Address DataB5 PCIIRDYB I/O PCI Initiator ReadyB6 PCIPAR I/O PCI PAR SignalB7 PCIAD12 I/O PCI Address DataB8 PCIAD6 I/O PCI Address DataB9 PCIAD0 I/O PCI Address DataB10 GPIO52 I/O VODY0: Digital Video Y Data OutputB11 GPIO56 I/O VODY4: Digital Video Y Data OutputB12 GPIO70 I/O VODC8: Digital Video Cb/Cr Data OutputB13 GPIO81 I/O Not in Use. (Pull-down)B14 SAVDDANA - 1.8V supply (Serial ATA analog VDD)B15 SACREFP I SATA Clock Positive Input B16 SAGNDDIG - Digital Ground for Serial ATAB17 SATXP1 O SATA Transport positive port-1 (not used)B18 SAGNDDIG - Digital Ground for Serial ATAB19 SARXN1 I SATA Receiver Negative port-1 (not used)B20 SAGNDDIG - Digital Ground for Serial ATAB21 SATXP0 O SATA Transport Positive port-0B22 SAGNDDIG - Digital Ground for Serial ATAB23 SARXN0 I SATA Receiver Negative port-0B24 SAGNDDIG - Digital Ground for Serial ATAB25 GPIO18 O XVMUTE (Video Mute ON="0")B26 GPIO19 O FORMAT1 (480="0" 720,1080="1")B27 GPIO9 O PCI_XRST (PCI bus reset)
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionB28 GPIO10 I EMMA_DIPSW0 (Fixed at "H")B29 EJTMS I JTAG I/F_0 Mode SetB30 EJTDO O JTAG I/F_0 Data OutputB31 EJTDI I JTAG I/F_0 Data InputB32 ATX O SPDIF output (Optical and coaxial terminal output signal)B33 VOID - This pin is not ball.C1 GND - Ground for digital and DDR2 SDRAMC2 PCIAD27 I/O PCI Address DataC3 PCIAD22 I/O PCI Address DataC4 PCIAD19 I/O PCI Address DataC5 PCIFRAMEB I/O PCI Cycle FrameC6 PCISERRB I/O PCI System ErrorC7 PCIAD14 I/O PCI Address DataC8 PCIAD7 I/O PCI Address DataC9 PCIAD1 I/O PCI Address DataC10 GPIO49 I/O VOCLK: Video Pixel ClockC11 GPIO54 I/O VODY2: Digital Video Y Data OutputC12 GPIO67 I/O VODC5: Digital Video Cb/Cr Data OutputC13 GPIO72 I/O AOHMCK: External HDMI Master Clock OutputC14 SAGNDDIG - Digital Ground for Serial ATAC15 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)C16 GPIO86 I/O Not in Use. (Pull-down)C17 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)C18 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)C19 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)C20 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)C21 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)C22 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)C23 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)C24 GPIO28 O Not used (Fixed at "H")C25 VDD3 - 3.3V supply (I/O buffers)C26 GPIO13 O NAND_WP (NAND write protect)C27 GND - Ground for digital and DDR2 SDRAMC28 GPIO0 O Not usedC29 GPIO5 I Not used (Fixed at "L")C30 VDD3 - 3.3V supply (I/O buffers)C31 GND - Ground for digital and DDR2 SDRAMC32 AO0BCK O Bit Clock for 8ch outputC33 AO0BD0 O Data (Front L/R) for 8ch outputD1 CLK27IN I 27MHz Clock InputD2 GND - Ground for digital and DDR2 SDRAMD3 PCIAD25 I/O PCI Address DataD4 PCIAD20 I/O PCI Address DataD5 GND - Ground for digital and DDR2 SDRAMD6 PCIPERRB I/O PCI Parity ErrorD7 GND - Ground for digital and DDR2 SDRAMD8 PCIAD8 I/O PCI Address DataD9 PCIAD2 I/O PCI Address DataD10 GND - Ground for digital and DDR2 SDRAMD11 GPIO51 I/O VOVSB: Vertical Sync SignalD12 GPIO59 I/O VODY7: Digital Video Y Data OutputD13 GPIO63 I/O VODC1: Digital Video Cb/Cr Data OutputD14 GPIO79 I/O AOHTX: IEC60958 output for External HDMID15 GPIO83 I/O Not in Use. (Pull-down)D16 GPIO85 I/O Not in Use. (Pull-down)D17 GPIO77 I/O AOHBD2: Data output for External HDMID18 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)D19 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)D20 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)D21 GPIO21 O ASPECT1 (4:3, 16:9="0" 4:3LB="1")D22 GPIO33 I PCI INT D (PCI Interrupt: Not used)
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionD23 GPIO29 I Not used (Fixed at "H")D24 GPIO22 I EJ2TDI (JTAG I/F_1 Data Input)D25 GND - Ground for digital and DDR2 SDRAMD26 GPIO8 I Not used (Fixed at "L")D27 GPIO6 I PCI REQ1 (Not used)D28 GPIO3 I Not used (Fixed at "L")D29 VDD3 - 3.3V supply (I/O buffers)D30 GND - Ground for digital and DDR2 SDRAMD31 AO0BD3 O Data (Surround back L/R) for 8ch outputD32 AO0LRCK O LR Clock for 8ch outputD33 AO0MCK O Master Clock for 8ch outputE1 GND - Ground for digital and DDR2 SDRAME2 PCIGNT0 O PCI GrantE3 PCIAD29 I/O PCI Address DataE4 PCIAD24 I/O PCI Address DataE5 PCICBEB2 I/O PCI Bus Command and Byte EnableE6 PCISTOPB I/O PCI StopE7 PCICBEB1 I/O PCI Bus Command and Byte EnableE8 PCIAD9 I/O PCI Address DataE9 PCIAD3 I/O PCI Address DataE10 GPIO55 I/O VODY3: Digital Video Y Data OutputE11 GPIO62 I/O VODC0: Digital Video Cb/Cr Data OutputE12 GPIO66 I/O VODC4: Digital Video Cb/Cr Data OutputE13 GPIO64 I/O VODC2: Digital Video Cb/Cr Data OutputE14 GPIO69 I/O VODC7: Digital Video Cb/Cr Data OutputE15 GPIO78 I/O AOHBD3: Data output for External HDMIE16 GPIO82 I/O Not in Use. (Pull-down)E17 GPIO84 I/O Not in Use. (Pull-down)E18 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)E19 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)E20 GPIO32 I PCI INT C (PCI Interrupt: Not used)E21 GPIO23 I EJ2TCK (JTAG I/F_1 Clock Input)E22 GPIO31 I PCI INT B (PCI Interrupt: Not used)E23 GPIO26 I EJ2TRST (JTAG I/F_1 Reset Input)E24 GPIO16 O DAC XRST (Audio DAC Reset "H": Reset "L": Normal)E25 GPIO15 O EMMA CSI0 DAC2 XCS (2ch Audio DAC CS)E26 GPIO2 O EMMA CSI0 VENC_XCS (Not used)E27 GPIO1 O EMMA_CSI0_HDE2_XCS (Not used)E28 GND - Ground for digital and DDR2 SDRAME29 TMODE3 I Test terminal (Not used: Fixed at "L")E30 AO0BD1 O Data (Surround L/R) for 8ch outputE31 AO0BD2 O Data (Center/SW) for 8ch outputE32 AO1BD O Data for 2ch outputE33 AO1MCK O Master Clock for 2ch outputF1 XI I Crystal InputF2 GND - Ground for digital and DDR2 SDRAMF3 PCIREQB0 I PCI RequestF4 PCIIDSEL I PCI Initialization Device SelectF5 PCICBEB3 I/O PCI Bus Command and Byte EnableF6 PCIDEVSELB I/O PCI Device SelectF7 PCIAD13 I/O PCI Address DataF8 PCICBEB0 I/O PCI Bus Command and Byte EnableF9 PCIAD4 I/O PCI Address DataF10 GPIO53 I/O VODY1: Digital Video Y Data OutputF11 GPIO60 I/O VODY8: Digital Video Y Data OutputF12 GPIO57 I/O VODY5: Digital Video Y Data OutputF13 GPIO65 I/O VODC3: Digital Video Cb/Cr Data OutputF14 GPIO71 I/O VODC9: Digital Video Cb/Cr Data OutputF15 GPIO80 I/O Not in Use. (Pull-down)F16 GPIO74 I/O AOHBCK: External HDMI BCK OutputF17 SAGNDANA - Analog Ground for Serial ATA
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionF18 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)F19 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)F20 GPIO27 I EJ2DINT (JTAG I/F_1 debug interrupt)F21 GPIO30 I PCI INT A (PCI Interrupt: USB)F22 GPIO25 I EJ2TMS (JTAG I/F_1 Mode Set)F23 GPIO24 O EJ2TDO (JTAG I/F_1 Data Out)F24 GPIO17 O XAMUTE (Audio Mute: "H": Normal "L": Mute)F25 GPIO12 O GLB XRST (Not used)F26 GPIO7 O PCI GNT1 (Not used)F27 VRVDD - 1.05V supply for VR5500 PLLF28 TMODE5 I Test terminal (Not used: Fixed at "L")F29 TEST I Test terminal (Not used: Fixed at "L")F30 S2DOUT O IF SDI (IFcon Communication Data Out)F31 AO1LRCK O LR Clock for 2ch outputF32 AO1BCK O Bit Clock for 2ch outputF33 VDD3 - 3.3V supply (I/O buffers)G1 XO O Crystal OutputG2 GND - Ground for digital and DDR2 SDRAMG3 PCIAD28 I/O PCI Address DataG4 PCIAD26 I/O PCI Address DataG5 PCIAD31 I/O PCI Address DataG6 PCIAD15 I/O PCI Address DataG7 PCIAD16 I/O PCI Address DataG8 PCIAD10 I/O PCI Address DataG9 VDD3 - 3.3V supply (I/O buffers)G10 GND - Ground for digital and DDR2 SDRAMG11 GPIO50 I/O VOHSB: Horizontal Sync SignalG12 GPIO75 I/O AOHBD0: Data output for External HDMIG13 GPIO61 I/O VODY9: Digital Video Y Data OutputG14 VDD3 - 3.3V supply (I/O buffers)G15 GPIO73 I/O AOHLRCK: External HDMI LRCK Clock OutputG16 SAVDDDIG - 1.05V supply (Serial ATA digital VDD)G17 SAVDDANA - 1.8V supply (Serial ATA analog VDD)G18 SAGNDDIG - Digital Ground for Serial ATAG19 SAGNDDIG - Digital Ground for Serial ATAG20 GPIO36 O FORMAT0 (480, 1080="0" 720="1")G21 VDD10 - 1.05V supply (core)G22 GND - Ground for digital and DDR2 SDRAMG23 VDD3 - 3.3V supply (I/O buffers)G24 VDD3 - 3.3V supply (I/O buffers)G25 GPIO11 I EMMA_DIPSW0 (Fixed at "H")G26 VDD10 - 1.05V supply (core)G27 VRGND - Ground for VR5500 PLLG28 TMODE2 I Test terminal (Not used: Fixed at "L")G29 S2CKIN I IF SCK (IFcon Communication Clock In)G30 S0DOUT O EMMA CSI0 DO (CSI0 Data Out)G31 S0CKOUT O EMMA CSI0 CKIO (CSI0 Clock Out)G32 S2DIN I IF SDO (IFcon Communication Data In)G33 S0DIN I CSI0 DI (CSI0 Data In)H1 GND - Ground for digital and DDR2 SDRAMH2 CLKSEL I OSC27/CLK27IN Select SignalH3 PCICLKI I PCI 33MHz Clock InputH4 GND - Ground for digital and DDR2 SDRAMH5 PCIRSTB I PCI Hardware ResetH6 VDD3 - 3.3V supply (I/O buffers)H7 VDD10 - 1.05V supply (core)H8 VOID - This pin is not ball.H9 VOID - This pin is not ball.H10 VOID - This pin is not ball.H11 VOID - This pin is not ball.H12 VOID - This pin is not ball.
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionH13 VOID - This pin is not ball.H14 VOID - This pin is not ball.H15 VOID - This pin is not ball.H16 VOID - This pin is not ball.H17 VOID - This pin is not ball.H18 VOID - This pin is not ball.H19 VOID - This pin is not ball.H20 VOID - This pin is not ball.H21 VOID - This pin is not ball.H22 VOID - This pin is not ball.H23 VOID - This pin is not ball.H24 VOID - This pin is not ball.H25 VOID - This pin is not ball.H26 VOID - This pin is not ball.H27 TMODE4 I Test terminal (Not used: Fixed at "L")H28 TMODE1 I Test terminal (Not used: Fixed at "L")H29 S2CSB I Chip Select for CSI Ch2H30 GND - Ground for digital and DDR2 SDRAMH31 GPIO48 I Not used. Fixed at "H"H32 GPIO47 I Not used (Fixed at "L")H33 GPIO39 O Not usedJ1 D0DQS1 - DDR2 Positive Data StrobeJ2 GND - Ground for digital and DDR2 SDRAMJ3 D0VDD18 - 1.8V supply (DDR2 SDRAM)J4 CLK27OUT O 27MHz Clock output for XTALJ5 PCIAD30 I/O PCI Address DataJ6 VDD3 - 3.3V supply (I/O buffers)J7 VDD10 - 1.05V supply (core)J8 VOID - This pin is not ball.J9 VOID - This pin is not ball.J10 VOID - This pin is not ball.J11 VOID - This pin is not ball.J12 VOID - This pin is not ball.J13 VOID - This pin is not ball.J14 VOID - This pin is not ball.J15 VOID - This pin is not ball.J16 VOID - This pin is not ball.J17 VOID - This pin is not ball.J18 VOID - This pin is not ball.J19 VOID - This pin is not ball.J20 VOID - This pin is not ball.J21 VOID - This pin is not ball.J22 VOID - This pin is not ball.J23 VOID - This pin is not ball.J24 VOID - This pin is not ball.J25 VOID - This pin is not ball.J26 VOID - This pin is not ball.J27 TMODE0 I Test terminal (Not used: Fixed at "L")J28 RSTSWB I Main ResetJ29 GPIO46 O Not usedJ30 GPIO38 O UART Ch1 TX (Not used)J31 GPIO40 O Not usedJ32 GPIO45 O USB VBUS PCONT (Bus Power ON at "H")J33 GPIO37 I UART Ch1 RX (Not used)K1 D0DQS1B I/O DDR2 Negative Data StrobeK2 GND - Ground for digital and DDR2 SDRAMK3 D0Q10 I/O DDR2 Data Input/OutputK4 GND - Ground for digital and DDR2 SDRAMK5 GND - Ground for digital and DDR2 SDRAMK6 D0VDD18 - 1.8V supply (DDR2 SDRAM)K7 GND - Ground for digital and DDR2 SDRAM
6-6
BDP-BX1/S350
Pin No. Name I/O DescriptionK8 VOID - This pin is not ball.K9 VOID - This pin is not ball.K10 VOID - This pin is not ball.K11 VOID - This pin is not ball.K12 VOID - This pin is not ball.K13 VOID - This pin is not ball.K14 VOID - This pin is not ball.K15 VOID - This pin is not ball.K16 VOID - This pin is not ball.K17 VOID - This pin is not ball.K18 VOID - This pin is not ball.K19 VOID - This pin is not ball.K20 VOID - This pin is not ball.K21 VOID - This pin is not ball.K22 VOID - This pin is not ball.K23 VOID - This pin is not ball.K24 VOID - This pin is not ball.K25 VOID - This pin is not ball.K26 VOID - This pin is not ball.K27 NMI I Non maskable interrupt (Not used: Fixed at "H")K28 GND - Ground for digital and DDR2 SDRAMK29 GPIO42 I IT_GPIO1 (Boot picture output control)K30 GPIO35 O IP (Progressive="0" Interlace="1") (Not used)K31 GPIO41 O EMMA CSI0 DAC8 XCS (8ch Audio DAC CS: Not used)K32 GPIO34 O DAC MUTE (Audio DAC Mute "H": Mute "L": Normal)K33 UA0RXDB I UART Ch0 RXL1 GND - Ground for digital and DDR2 SDRAML2 D0Q9 I/O DDR2 Data Input/OutputL3 D0Q12 I/O DDR2 Data Input/OutputL4 D0Q8 I/O DDR2 Data Input/OutputL5 D0VDD18 - 1.8V supply (DDR2 SDRAM)L6 GND - Ground for digital and DDR2 SDRAML7 D0VDD18 - 1.8V supply (DDR2 SDRAM)L8 VOID - This pin is not ball.L9 VOID - This pin is not ball.L10 VOID - This pin is not ball.L11 VOID - This pin is not ball.L12 VOID - This pin is not ball.L13 VOID - This pin is not ball.L14 VOID - This pin is not ball.L15 VOID - This pin is not ball.L16 VOID - This pin is not ball.L17 VOID - This pin is not ball.L18 VOID - This pin is not ball.L19 VOID - This pin is not ball.L20 VOID - This pin is not ball.L21 VOID - This pin is not ball.L22 VOID - This pin is not ball.L23 VOID - This pin is not ball.L24 VOID - This pin is not ball.L25 VOID - This pin is not ball.L26 VOID - This pin is not ball.L27 SCL1 I/O I2C Ch1 Serial Clock (Not used)L28 SCL0 I/O I2C Ch0 Serial Clock (Not used)L29 UA0TXDB O UART Ch0 TXL30 GPIO44 I Not used (Fixed at "L")L31 GND - Ground for digital and DDR2 SDRAML32 DVDDYC - 3.3V supply (DAC digital VDD)L33 AGNDYC - Analog Ground for sub Video DACsM1 D0CLK0 O DDR2 Positive ClockM2 GND - Ground for digital and DDR2 SDRAM
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionM3 D0Q13 I/O DDR2 Data Input/OutputM4 D0Q14 I/O DDR2 Data Input/OutputM5 GND - Ground for digital and DDR2 SDRAMM6 D0VDD18 - 1.8V supply (DDR2 SDRAM)M7 GND - Ground for digital and DDR2 SDRAMM8 VOID - This pin is not ball.M9 VOID - This pin is not ball.M10 VOID - This pin is not ball.M11 VOID - This pin is not ball.M12 VOID - This pin is not ball.M13 VOID - This pin is not ball.M14 VOID - This pin is not ball.M15 VOID - This pin is not ball.M16 VOID - This pin is not ball.M17 VOID - This pin is not ball.M18 VOID - This pin is not ball.M19 VOID - This pin is not ball.M20 VOID - This pin is not ball.M21 VOID - This pin is not ball.M22 VOID - This pin is not ball.M23 VOID - This pin is not ball.M24 VOID - This pin is not ball.M25 VOID - This pin is not ball.M26 VOID - This pin is not ball.M27 SDA1 I/O I2C Ch1 Serial Data (Not used)M28 SDA0 I/O I2C Ch0 Serial Data (Not used)M29 GPIO43 O Not usedM30 GND - Ground for digital and DDR2 SDRAMM31 VAY O S-Video Y Signal OutputM32 GND - Ground for digital and DDR2 SDRAMM33 VAC O S-Video C Signal OutputN1 D0CLK0B O DDR2 Negative ClockN2 GND - Ground for digital and DDR2 SDRAMN3 D0DM1 I/O DDR2 Data MaskN4 D0Q11 I/O DDR2 Data Input/OutputN5 D0VDD18 - 1.8V supply (DDR2 SDRAM)N6 GND - Ground for digital and DDR2 SDRAMN7 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)N8 VOID - This pin is not ball.N9 VOID - This pin is not ball.N10 VOID - This pin is not ball.N11 VOID - This pin is not ball.N12 VOID - This pin is not ball.N13 PVDD - 1.05V supply for PLLN14 PGND - Ground for PLLN15 GND - Ground for digital and DDR2 SDRAMN16 VDD10 - 1.05V supply (core)N17 GND - Ground for digital and DDR2 SDRAMN18 VDD10 - 1.05V supply (core)N19 GND - Ground for digital and DDR2 SDRAMN20 PVDD - 1.05V supply for PLLN21 PVDD - 1.05V supply for PLLN22 VOID - This pin is not ball.N23 VOID - This pin is not ball.N24 VOID - This pin is not ball.N25 VOID - This pin is not ball.N26 VOID - This pin is not ball.N27 AVDDYC - Analog 3.3v supply for sub Video DACsN28 AGNDYC - Analog Ground for sub Video DACsN29 VACOMPYC - Compensation capacitance terminal (It with AVDDYC through 0.1uF)N30 VAREFYC - Voltage Reference Input for DAC (1.32V)
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionN31 GND - Ground for digital and DDR2 SDRAMN32 GND - Ground for digital and DDR2 SDRAMN33 GND - Ground for digital and DDR2 SDRAMP1 GND - Ground for digital and DDR2 SDRAMP2 D0Q2 I/O DDR2 Data Input/OutputP3 D0Q15 I/O DDR2 Data Input/OutputP4 GND - Ground for digital and DDR2 SDRAMP5 D0VDD18 - 1.8V supply (DDR2 SDRAM)P6 GND - Ground for digital and DDR2 SDRAMP7 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)P8 VOID - This pin is not ball.P9 VOID - This pin is not ball.P10 VOID - This pin is not ball.P11 VOID - This pin is not ball.P12 VOID - This pin is not ball.P13 PVDD - 1.05V supply for PLLP14 PGND - Ground for PLLP15 GND - Ground for digital and DDR2 SDRAMP16 GND - Ground for digital and DDR2 SDRAMP17 VDD10 - 1.05V supply (core)P18 GND - Ground for digital and DDR2 SDRAMP19 GND - Ground for digital and DDR2 SDRAMP20 PGND - Ground for PLLP21 PGND - Ground for PLLP22 VOID - This pin is not ball.P23 VOID - This pin is not ball.P24 VOID - This pin is not ball.P25 VOID - This pin is not ball.P26 VOID - This pin is not ball.P27 AVDDYC - Analog 3.3v supply for sub Video DACsP28 AGNDYC - Analog Ground for sub Video DACsP29 VAR O Component Output either R or Pr SignalP30 GND - Ground for digital and DDR2 SDRAMP31 VAB O Component Output either B or Pb SignalP32 GND - Ground for digital and DDR2 SDRAMP33 VAG O Component Output either G or Y SignalR1 D0DQS0 I/O DDR2 Positive Data StrobeR2 GND - Ground for digital and DDR2 SDRAMR3 D0Q1 I/O DDR2 Data Input/OutputR4 D0Q0 I/O DDR2 Data Input/OutputR5 D0WEB O DDR2 Command Write EnableR6 D0VDD18 - 1.8V supply (DDR2 SDRAM)R7 GND - Ground for digital and DDR2 SDRAMR8 VOID - This pin is not ball.R9 VOID - This pin is not ball.R10 VOID - This pin is not ball.R11 VOID - This pin is not ball.R12 VOID - This pin is not ball.R13 GND - Ground for digital and DDR2 SDRAMR14 GND - Ground for digital and DDR2 SDRAMR15 GND - Ground for digital and DDR2 SDRAMR16 VDD10 - 1.05V supply (core)R17 GND - Ground for digital and DDR2 SDRAMR18 VDD10 - 1.05V supply (core)R19 GND - Ground for digital and DDR2 SDRAMR20 GND - Ground for digital and DDR2 SDRAMR21 GND - Ground for digital and DDR2 SDRAMR22 VOID - This pin is not ball.R23 VOID - This pin is not ball.R24 VOID - This pin is not ball.R25 VOID - This pin is not ball.
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionR26 VOID - This pin is not ball.R27 AVDDRGB - Analog 3.3v supply for main Video DACsR28 AGNDRGB - Analog Ground for main Video DACsR29 VARSETYC - 680-ohm ResisterR30 VAREFRGB - Voltage Reference Input for DAC (1.32V)R31 VARSETRGB - 470-ohm ResisterR32 HGNDANA - Analog Ground for HDMIR33 HGNDANA - Analog Ground for HDMIT1 D0DQS0B I/O DDR2 Negative Data StrobeT2 GND - Ground for digital and DDR2 SDRAMT3 D0Q4 I/O DDR2 Data Input/OutputT4 D0Q3 I/O DDR2 Data Input/OutputT5 D0CKERSTB I DDR2 Clock Enable External Control 1.8V or 0.0VT6 GND - Ground for digital and DDR2 SDRAMT7 D0VREF I DDR2 Reference VoltageT8 VOID - This pin is not ball.T9 VOID - This pin is not ball.T10 VOID - This pin is not ball.T11 VOID - This pin is not ball.T12 VOID - This pin is not ball.T13 VDD10 - 1.05V supply (core)T14 GND - Ground for digital and DDR2 SDRAMT15 VDD10 - 1.05V supply (core)T16 GND - Ground for digital and DDR2 SDRAMT17 VDD10 - 1.05V supply (core)T18 GND - Ground for digital and DDR2 SDRAMT19 VDD10 - 1.05V supply (core)T20 GND - Ground for digital and DDR2 SDRAMT21 VDD10 - 1.05V supply (core)T22 VOID - This pin is not ball.T23 VOID - This pin is not ball.T24 VOID - This pin is not ball.T25 VOID - This pin is not ball.T26 VOID - This pin is not ball.T27 AVDDRGB - Analog 3.3v supply for main Video DACsT28 AGNDRGB - Analog Ground for main Video DACsT29 VACOMPRGB - Compensation capacitance terminal (It with AVDDYC through 0.1uF)T30 DVDDRGB - 3.3V supply (DAC digital VDD)T31 HGNDANA - Analog Ground for HDMIT32 HTXN2 O TMDS Data output 2-T33 HTXP2 O TMDS Data output 2+U1 GND - Ground for digital and DDR2 SDRAMU2 D0DM0 I/O DDR2 Data MaskU3 D0Q5 I/O DDR2 Data Input/OutputU4 D0Q6 I/O DDR2 Data Input/OutputU5 D0BA0 O DDR2 Bank AddressU6 D0ADD10 O DDR2 Address OutputU7 GND - Ground for digital and DDR2 SDRAMU8 VOID - This pin is not ball.U9 VOID - This pin is not ball.U10 VOID - This pin is not ball.U11 VOID - This pin is not ball.U12 VOID - This pin is not ball.U13 GND - Ground for digital and DDR2 SDRAMU14 VDD10 - 1.05V supply (core)U15 GND - Ground for digital and DDR2 SDRAMU16 VDD10 - 1.05V supply (core)U17 GND - Ground for digital and DDR2 SDRAMU18 VDD10 - 1.05V supply (core)U19 GND - Ground for digital and DDR2 SDRAMU20 VDD10 - 1.05V supply (core)
6-0
BDP-BX1/S350
Pin No. Name I/O DescriptionU21 GND - Ground for digital and DDR2 SDRAMU22 VOID - This pin is not ball.U23 VOID - This pin is not ball.U24 VOID - This pin is not ball.U25 VOID - This pin is not ball.U26 VOID - This pin is not ball.U27 VDD10 - 1.05V supply (core)U28 GND - Ground for digital and DDR2 SDRAMU29 VDD3 - 3.3V supply (I/O buffers)U30 VDD3 - 3.3V supply (I/O buffers)U31 HGNDANA - Analog Ground for HDMIU32 HVDDANA - 1.0V Supply (HDMI analog VDD)U33 HVDDANA - 1.0V Supply (HDMI analog VDD)V1 D0Q7 I/O DDR2 Data Input/OutputV2 D0BA1 O DDR2 Bank AddressV3 D0ADD3 O DDR2 Address OutputV4 GND - Ground for digital and DDR2 SDRAMV5 D0CKE O DDR2 Clock EnableV6 D0ADD7 O DDR2 Address OutputV7 D0ADD9 O DDR2 Address OutputV8 VOID - This pin is not ball.V9 VOID - This pin is not ball.V10 VOID - This pin is not ball.V11 VOID - This pin is not ball.V12 VOID - This pin is not ball.V13 VDD10 - 1.05V supply (core)V14 GND - Ground for digital and DDR2 SDRAMV15 VDD10 - 1.05V supply (core)V16 GND - Ground for digital and DDR2 SDRAMV17 VDD10 - 1.05V supply (core)V18 GND - Ground for digital and DDR2 SDRAMV19 VDD10 - 1.05V supply (core)V20 GND - Ground for digital and DDR2 SDRAMV21 GND - Ground for digital and DDR2 SDRAMV22 VOID - This pin is not ball.V23 VOID - This pin is not ball.V24 VOID - This pin is not ball.V25 VOID - This pin is not ball.V26 VOID - This pin is not ball.V27 HVDDANA - 1.0V Supply (HDMI analog VDD)V28 HVDDANA - 1.0V Supply (HDMI analog VDD)V29 HVDDANA - 1.0V Supply (HDMI analog VDD)V30 HGNDANA - Analog Ground for HDMIV31 HEXTSWING I Resistance Connection Terminal for Output Amplitude ControlV32 HTXN1 O TMDS Data output 1-V33 HTXP1 O TMDS Data output 1+W1 D0ADD1 O DDR2 Address OutputW2 D0VDD18 - 1.8V supply (DDR2 SDRAM)W3 GND - Ground for digital and DDR2 SDRAMW4 D0ADD12 O DDR2 Address OutputW5 D0ADD13 O DDR2 Address OutputW6 D0ADD11 O DDR2 Address OutputW7 D0ADD14 O DDR2 Address OutputW8 VOID - This pin is not ball.W9 VOID - This pin is not ball.W10 VOID - This pin is not ball.W11 VOID - This pin is not ball.W12 VOID - This pin is not ball.W13 GND - Ground for digital and DDR2 SDRAMW14 GND - Ground for digital and DDR2 SDRAMW15 GND - Ground for digital and DDR2 SDRAM
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionW16 VDD10 - 1.05V supply (core)W17 GND - Ground for digital and DDR2 SDRAMW18 VDD10 - 1.05V supply (core)W19 GND - Ground for digital and DDR2 SDRAMW20 PGND - Ground for PLLW21 PVDD - 1.05V supply for PLLW22 VOID - This pin is not ball.W23 VOID - This pin is not ball.W24 VOID - This pin is not ball.W25 VOID - This pin is not ball.W26 VOID - This pin is not ball.W27 HGNDANA - Analog Ground for HDMIW28 HGNDANA - Analog Ground for HDMIW29 HGNDANA - Analog Ground for HDMIW30 HGNDANA - Analog Ground for HDMIW31 HDSCL I/O DDC ClockW32 HGNDANA - Analog Ground for HDMIW33 HGNDANA - Analog Ground for HDMIY1 D0VDD18 - 1.8V supply (DDR2 SDRAM)Y2 D0ADD5 O DDR2 Address OutputY3 D0ADD6 O DDR2 Address OutputY4 D0ADD2 O DDR2 Address OutputY5 D0ADD4 O DDR2 Address OutputY6 D0CASB O DDR2 Column Address Strobe SignalY7 D0ADD0 O DDR2 Address OutputY8 VOID - This pin is not ball.Y9 VOID - This pin is not ball.Y10 VOID - This pin is not ball.Y11 VOID - This pin is not ball.Y12 VOID - This pin is not ball.Y13 PGND - Ground for PLLY14 PGND - Ground for PLLY15 GND - Ground for digital and DDR2 SDRAMY16 GND - Ground for digital and DDR2 SDRAMY17 VDD10 - 1.05V supply (core)Y18 GND - Ground for digital and DDR2 SDRAMY19 GND - Ground for digital and DDR2 SDRAMY20 PGND - Ground for PLLY21 PVDD - 1.05V supply for PLLY22 VOID - This pin is not ball.Y23 VOID - This pin is not ball.Y24 VOID - This pin is not ball.Y25 VOID - This pin is not ball.Y26 VOID - This pin is not ball.Y27 GND - Ground for digital and DDR2 SDRAMY28 ETMDC O Ether Management Clock OutputY29 ETMDIO I/O Ether Management Data Input/OutputY30 ETREFCLK I Ether Reference Clock InputY31 HDSDA I/O DDC DataY32 HTXN0 O TMDS Data output 0-Y33 HTXP0 O TMDS Data output 0+AA1 D0ADD8 O DDR2 Address OutputAA2 D0CS0B O DDR2 Chip SelectAA3 D0VDD18 - 1.8V supply (DDR2 SDRAM)AA4 D0RASB O DDR2 Raw Address Strobe SignalAA5 GND - Ground for digital and DDR2 SDRAMAA6 D0CS1B O DDR2 Chip Select/Bank AddressAA7 GND - Ground for digital and DDR2 SDRAMAA8 VOID - This pin is not ball.AA9 VOID - This pin is not ball.AA10 VOID - This pin is not ball.
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionAA11 VOID - This pin is not ball.AA12 VOID - This pin is not ball.AA13 PVDD - 1.05V supply for PLLAA14 PVDD - 1.05V supply for PLLAA15 GND - Ground for digital and DDR2 SDRAMAA16 VDD10 - 1.05V supply (core)AA17 GND - Ground for digital and DDR2 SDRAMAA18 VDD10 - 1.05V supply (core)AA19 GND - Ground for digital and DDR2 SDRAMAA20 PGND - Ground for PLLAA21 PVDD - 1.05V supply for PLLAA22 VOID - This pin is not ball.AA23 VOID - This pin is not ball.AA24 VOID - This pin is not ball.AA25 VOID - This pin is not ball.AA26 VOID - This pin is not ball.AA27 ETRXER I Ether RX Error DetectionAA28 ETRXD0 I Ether RX Data InputAA29 ETRXD1 I Ether RX Data InputAA30 ETCRS I Ether RX Data EnableAA31 HHPD I Hot Plug DetectAA32 HVDDANA - 1.0V Supply (HDMI analog VDD)AA33 HVDDANA - 1.0V Supply (HDMI analog VDD)AB1 D0ODT0 O DDR2 On Die terminal controlAB2 GND - Ground for digital and DDR2 SDRAMAB3 D0ADD15 O DDR2 Address OutputAB4 D0Q22 I/O DDR2 Data Input/OutputAB5 D0ODT1 O DDR2 On Die terminal controlAB6 D0VDD18 - 1.8V supply (DDR2 SDRAM)AB7 D0VDD18 - 1.8V supply (DDR2 SDRAM)AB8 VOID - This pin is not ball.AB9 VOID - This pin is not ball.AB10 VOID - This pin is not ball.AB11 VOID - This pin is not ball.AB12 VOID - This pin is not ball.AB13 VOID - This pin is not ball.AB14 VOID - This pin is not ball.AB15 VOID - This pin is not ball.AB16 VOID - This pin is not ball.AB17 VOID - This pin is not ball.AB18 VOID - This pin is not ball.AB19 VOID - This pin is not ball.AB20 VOID - This pin is not ball.AB21 VOID - This pin is not ball.AB22 VOID - This pin is not ball.AB23 VOID - This pin is not ball.AB24 VOID - This pin is not ball.AB25 VOID - This pin is not ball.AB26 VOID - This pin is not ball.AB27 GND - Ground for digital and DDR2 SDRAMAB28 ETTXD1 O Ether TX Data OutputAB29 ETTXD0 O Ether TX Data OutputAB30 ETTXEN O Ether TX Data EnableAB31 HGNDANA - Analog Ground for HDMIAB32 HTXCN O TMDS Clock output 0-AB33 HTXCP O TMDS Clock output 0+AC1 GND - Ground for digital and DDR2 SDRAMAC2 D0Q23 I/O DDR2 Data Input/OutputAC3 D0Q21 I/O DDR2 Data Input/OutputAC4 D0Q20 I/O DDR2 Data Input/OutputAC5 GND - Ground for digital and DDR2 SDRAM
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionAC6 D0VDD18 - 1.8V supply (DDR2 SDRAM)AC7 GND - Ground for digital and DDR2 SDRAMAC8 VOID - This pin is not ball.AC9 VOID - This pin is not ball.AC10 VOID - This pin is not ball.AC11 VOID - This pin is not ball.AC12 VOID - This pin is not ball.AC13 VOID - This pin is not ball.AC14 VOID - This pin is not ball.AC15 VOID - This pin is not ball.AC16 VOID - This pin is not ball.AC17 VOID - This pin is not ball.AC18 VOID - This pin is not ball.AC19 VOID - This pin is not ball.AC20 VOID - This pin is not ball.AC21 VOID - This pin is not ball.AC22 VOID - This pin is not ball.AC23 VOID - This pin is not ball.AC24 VOID - This pin is not ball.AC25 VOID - This pin is not ball.AC26 VOID - This pin is not ball.AC27 VDD3 - 3.3V supply (I/O buffers)AC28 GND - Ground for digital and DDR2 SDRAMAC29 GND - Ground for digital and DDR2 SDRAMAC30 GND - Ground for digital and DDR2 SDRAMAC31 HGNDANA - Analog Ground for HDMIAC32 HGNDANA - Analog Ground for HDMIAC33 HGNDANA - Analog Ground for HDMIAD1 D0DQS2 I/O DDR2 Positive Data StrobeAD2 GND - Ground for digital and DDR2 SDRAMAD3 D0DM2 I/O DDR2 Data MaskAD4 D0Q17 I/O DDR2 Data Input/OutputAD5 D0VDD18 - 1.8V supply (DDR2 SDRAM)AD6 GND - Ground for digital and DDR2 SDRAMAD7 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)AD8 VOID - This pin is not ball.AD9 VOID - This pin is not ball.AD10 VOID - This pin is not ball.AD11 VOID - This pin is not ball.AD12 VOID - This pin is not ball.AD13 VOID - This pin is not ball.AD14 VOID - This pin is not ball.AD15 VOID - This pin is not ball.AD16 VOID - This pin is not ball.AD17 VOID - This pin is not ball.AD18 VOID - This pin is not ball.AD19 VOID - This pin is not ball.AD20 VOID - This pin is not ball.AD21 VOID - This pin is not ball.AD22 VOID - This pin is not ball.AD23 VOID - This pin is not ball.AD24 VOID - This pin is not ball.AD25 VOID - This pin is not ball.AD26 VOID - This pin is not ball.AD27 VDD3 - 3.3V supply (I/O buffers)AD28 GND - Ground for digital and DDR2 SDRAMAD29 RDATA11/GDATA11 I/O Data bus for external memory and peripheralAD30 RDATA12/GDATA12 I/O Data bus for external memory and peripheralAD31 RDATA13/GDATA13 I/O Data bus for external memory and peripheralAD32 RDATA14/GDATA14 I/O Data bus for external memory and peripheralAD33 RDATA15/GDATA15 I/O Data bus for external memory and peripheral
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionAE1 D0DQS2B - DDR2 Negative Data StrobeAE2 GND - Ground for digital and DDR2 SDRAMAE3 D0VDD18 - 1.8V supply (DDR2 SDRAM)AE4 D0Q16 I/O DDR2 Data Input/OutputAE5 D0VDD18 - 1.8V supply (DDR2 SDRAM)AE6 GND - Ground for digital and DDR2 SDRAMAE7 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)AE8 VOID - This pin is not ball.AE9 VOID - This pin is not ball.AE10 VOID - This pin is not ball.AE11 VOID - This pin is not ball.AE12 VOID - This pin is not ball.AE13 VOID - This pin is not ball.AE14 VOID - This pin is not ball.AE15 VOID - This pin is not ball.AE16 VOID - This pin is not ball.AE17 VOID - This pin is not ball.AE18 VOID - This pin is not ball.AE19 VOID - This pin is not ball.AE20 VOID - This pin is not ball.AE21 VOID - This pin is not ball.AE22 VOID - This pin is not ball.AE23 VOID - This pin is not ball.AE24 VOID - This pin is not ball.AE25 VOID - This pin is not ball.AE26 VOID - This pin is not ball.AE27 VDD10 - 1.05V supply (core)AE28 GND - Ground for digital and DDR2 SDRAMAE29 RDATA6/GDATA6 I/O Data bus for external memory and peripheralAE30 RDATA7/GDATA7 I/O Data bus for external memory and peripheralAE31 RDATA8/GDATA8 I/O Data bus for external memory and peripheralAE32 RDATA9/GDATA9 I/O Data bus for external memory and peripheralAE33 RDATA10/GDATA10 I/O Data bus for external memory and peripheralAF1 GND - Ground for digital and DDR2 SDRAMAF2 D0Q19 I/O DDR2 Data Input/OutputAF3 D0Q18 I/O DDR2 Data Input/OutputAF4 D0Q29 I/O DDR2 Data Input/OutputAF5 GND - Ground for digital and DDR2 SDRAMAF6 D0VDD18 - 1.8V supply (DDR2 SDRAM)AF7 GND - Ground for digital and DDR2 SDRAMAF8 VOID - This pin is not ball.AF9 VOID - This pin is not ball.AF10 VOID - This pin is not ball.AF11 VOID - This pin is not ball.AF12 VOID - This pin is not ball.AF13 VOID - This pin is not ball.AF14 VOID - This pin is not ball.AF15 VOID - This pin is not ball.AF16 VOID - This pin is not ball.AF17 VOID - This pin is not ball.AF18 VOID - This pin is not ball.AF19 VOID - This pin is not ball.AF20 VOID - This pin is not ball.AF21 VOID - This pin is not ball.AF22 VOID - This pin is not ball.AF23 VOID - This pin is not ball.AF24 VOID - This pin is not ball.AF25 VOID - This pin is not ball.AF26 VOID - This pin is not ball.AF27 VDD10 - 1.05V supply (core)AF28 VDD3 - 3.3V supply (I/O buffers)
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionAF29 RDATA1/GDATA1 I/O Data bus for external memory and peripheralAF30 RDATA2/GDATA2 I/O Data bus for external memory and peripheralAF31 RDATA3/GDATA3 I/O Data bus for external memory and peripheralAF32 RDATA4/GDATA4 I/O Data bus for external memory and peripheralAF33 RDATA5/GDATA5 I/O Data bus for external memory and peripheralAG1 D0CLK1 O DDR2 Positive ClockAG2 GND - Ground for digital and DDR2 SDRAMAG3 D0Q31 I/O DDR2 Data Input/OutputAG4 GND - Ground for digital and DDR2 SDRAMAG5 D0Q28 I/O DDR2 Data Input/OutputAG6 GND - Ground for digital and DDR2 SDRAMAG7 VDD3 - 3.3V supply (I/O buffers)AG8 GND - Ground for digital and DDR2 SDRAMAG9 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)
AG10 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)AG11 GND - Ground for digital and DDR2 SDRAMAG12 D1VDD18 - 1.8V supply (DDR2 SDRAM)AG13 GND - Ground for digital and DDR2 SDRAMAG14 D1ADD0 O DDR2 Address OutputAG15 D1ADD14 O DDR2 Address OutputAG16 D1ADD9 O DDR2 Address OutputAG17 GND - Ground for digital and DDR2 SDRAMAG18 D1VREF I DDR2 Reference VoltageAG19 GND - Ground for digital and DDR2 SDRAMAG20 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)AG21 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)AG22 GND - Ground for digital and DDR2 SDRAMAG23 D1VDD18 - 1.8V supply (DDR2 SDRAM)AG24 GND - Ground for digital and DDR2 SDRAMAG25 VDD3 - 3.3V supply (I/O buffers)AG26 VDD3 - 3.3V supply (I/O buffers)AG27 VDD10 - 1.05V supply (core)AG28 VDD3 - 3.3V supply (I/O buffers)AG29 RDATA0/GDATA0 I/O Data bus for external memory and peripheralAG30 GND - Ground for digital and DDR2 SDRAMAG31 VDD3 - 3.3V supply (I/O buffers)AG32 GND - Ground for digital and DDR2 SDRAMAG33 VDD3 - 3.3V supply (I/O buffers)AH1 D0CLK1B O DDR2 Negative ClockAH2 GND - Ground for digital and DDR2 SDRAMAH3 D1VDD18 - 1.8V supply (DDR2 SDRAM)AH4 D0Q30 I/O DDR2 Data Input/OutputAH5 D0Q26 I/O DDR2 Data Input/OutputAH6 GND - Ground for digital and DDR2 SDRAMAH7 GND - Ground for digital and DDR2 SDRAMAH8 D1VDD18 - 1.8V supply (DDR2 SDRAM)AH9 GND - Ground for digital and DDR2 SDRAMAH10 GND - Ground for digital and DDR2 SDRAMAH11 D1VDD18 - 1.8V supply (DDR2 SDRAM)AH12 GND - Ground for digital and DDR2 SDRAMAH13 D1CS1B O DDR2 Chip Select/Bank AddressAH14 D1CASB O DDR2 Column Address Strobe SignalAH15 D1ADD11 O DDR2 Address OutputAH16 D1ADD7 O DDR2 Address OutputAH17 D1ADD10 O DDR2 Address OutputAH18 GND - Ground for digital and DDR2 SDRAMAH19 D1VDD18 - 1.8V supply (DDR2 SDRAM)AH20 GND - Ground for digital and DDR2 SDRAMAH21 GND - Ground for digital and DDR2 SDRAMAH22 D1VDD18 - 1.8V supply (DDR2 SDRAM)AH23 GND - Ground for digital and DDR2 SDRAM
6-6
BDP-BX1/S350
Pin No. Name I/O DescriptionAH24 D1VDD18 - 1.8V supply (DDR2 SDRAM)AH25 GND - Ground for digital and DDR2 SDRAMAH26 GND - Ground for digital and DDR2 SDRAMAH27 GND - Ground for digital and DDR2 SDRAMAH28 GND - Ground for digital and DDR2 SDRAMAH29 GND - Ground for digital and DDR2 SDRAMAH30 RADD22/GADD22 O Address bus for external memory and peripheralAH31 RADD23/GADD23 O Address bus for external memory and peripheralAH32 RADD24/GADD24 O Address bus for external memory and peripheralAH33 RADD25/GADD25 O Address bus for external memory and peripheralAJ1 GND - Ground for digital and DDR2 SDRAMAJ2 D0DM3 I/O DDR2 Data MaskAJ3 D0Q27 I/O DDR2 Data Input/OutputAJ4 D0Q25 I/O DDR2 Data Input/OutputAJ5 GND - Ground for digital and DDR2 SDRAMAJ6 D1Q26 I/O DDR2 Data Input/OutputAJ7 D1Q28 I/O DDR2 Data Input/OutputAJ8 GND - Ground for digital and DDR2 SDRAMAJ9 D1VDD18 - 1.8V supply (DDR2 SDRAM)AJ10 D1VDD18 - 1.8V supply (DDR2 SDRAM)AJ11 D1RQ0 O DDR2 Pull down (150 ohm) to DDR2 SDRAM GNDAJ12 D1ODT1 O DDR2 On Die terminal controlAJ13 D1RQ1 O DDR2 Pull up (150 ohm) to DDR2 SDRAM power supplyAJ14 D1ADD4 O DDR2 Address OutputAJ15 D1ADD13 O DDR2 Address OutputAJ16 D1CKE O DDR2 Clock EnableAJ17 D1BA0 O DDR2 Bank AddressAJ18 D1CKERSTB I DDR2 Clock Enable External Control 1.8V or 0.0VAJ19 D1WEB O DDR2 Command Write EnableAJ20 D1VDD18 - 1.8V supply (DDR2 SDRAM)AJ21 D1VDD18 - 1.8V supply (DDR2 SDRAM)AJ22 GND - Ground for digital and DDR2 SDRAMAJ23 D1VDD18 - 1.8V supply (DDR2 SDRAM)AJ24 GND - Ground for digital and DDR2 SDRAMAJ25 FCSB0 O Chip select for NOR Flash ROMAJ26 FCSB2 O Chip select for NOR Flash ROMAJ27 FCSB3 O Chip select for NOR Flash ROMAJ28 GND - Ground for digital and DDR2 SDRAMAJ29 RADD17/GADD17 O Address bus for external memory and peripheralAJ30 RADD18/GADD18 O Address bus for external memory and peripheralAJ31 RADD19/GADD19 O Address bus for external memory and peripheralAJ32 RADD20/GADD20 O Address bus for external memory and peripheralAJ33 RADD21/GADD21 O Address bus for external memory and peripheralAK1 D0DQS3 I/O DDR2 Positive Data StrobeAK2 GND - Ground for digital and DDR2 SDRAMAK3 D0Q24 I/O DDR2 Data Input/OutputAK4 GND - Ground for digital and DDR2 SDRAMAK5 D1Q25 I/O DDR2 Data Input/OutputAK6 D1Q30 I/O DDR2 Data Input/OutputAK7 GND - Ground for digital and DDR2 SDRAMAK8 D1Q29 I/O DDR2 Data Input/OutputAK9 D1Q16 I/O DDR2 Data Input/OutputAK10 D1Q17 I/O DDR2 Data Input/OutputAK11 D1Q20 I/O DDR2 Data Input/OutputAK12 D1Q22 I/O DDR2 Data Input/OutputAK13 D1RASB O Raw Address Strobe SignalAK14 D1ADD2 O DDR2 Address OutputAK15 D1ADD12 O DDR2 Address OutputAK16 GND - Ground for digital and DDR2 SDRAMAK17 D1Q6 I/O DDR2 Data Input/OutputAK18 D1Q3 I/O DDR2 Data Input/Output
6-
BDP-BX1/S350
Pin No. Name I/O DescriptionAK19 D1Q0 I/O DDR2 Data Input/OutputAK20 GND - Ground for digital and DDR2 SDRAMAK21 D1Q11 I/O DDR2 Data Input/OutputAK22 D1Q14 I/O DDR2 Data Input/OutputAK23 GND - Ground for digital and DDR2 SDRAMAK24 D1Q8 I/O DDR2 Data Input/OutputAK25 GCSB1 O Chip select for external deviceAK26 FOEB O Output enable for NOR Flash ROMAK27 FCSB1 O Chip select for NOR Flash ROMAK28 FWEB O Write enable for NOR Flash ROMAK29 RADD12/GADD12 O Address bus for external memory and peripheralAK30 RADD13/GADD13 O Address bus for external memory and peripheralAK31 RADD14/GADD14 O Address bus for external memory and peripheralAK32 RADD15/GADD15 O Address bus for external memory and peripheralAK33 RADD16/GADD16 O Address bus for external memory and peripheralAL1 D0DQS3B I/O DDR2 Negative Data StrobeAL2 GND - Ground for digital and DDR2 SDRAMAL3 GND - Ground for digital and DDR2 SDRAMAL4 D1Q24 I/O DDR2 Data Input/OutputAL5 D1Q27 I/O DDR2 Data Input/OutputAL6 D1VDD18 - 1.8V supply (DDR2 SDRAM)AL7 D1Q31 I/O DDR2 Data Input/OutputAL8 D1Q18 I/O DDR2 Data Input/OutputAL9 D1VDD18 - 1.8V supply (DDR2 SDRAM)AL10 D1DM2 I/O DDR2 Data MaskAL11 D1Q21 I/O DDR2 Data Input/OutputAL12 D1ADD15 O DDR2 Address OutputAL13 D1VDD18 - 1.8V supply (DDR2 SDRAM)AL14 D1ADD6 O DDR2 Address OutputAL15 GND - Ground for digital and DDR2 SDRAMAL16 D1ADD3 O DDR2 Address OutputAL17 D1Q5 I/O DDR2 Data Input/OutputAL18 D1Q4 I/O DDR2 Data Input/OutputAL19 D1Q1 I/O DDR2 Data Input/OutputAL20 D1Q15 I/O DDR2 Data Input/OutputAL21 D1DM1 I/O DDR2 Data MaskAL22 D1Q13 I/O DDR2 Data Input/OutputAL23 D1Q12 I/O DDR2 Data Input/OutputAL24 D1Q10 I/O DDR2 Data Input/OutputAL25 D1VDD18 - 1.8V supply (DDR2 SDRAM)AL26 NALE O Address latch enable for NAND Flash ROMAL27 NCLE O Command latch enable for NAND Flash ROMAL28 GRDYB I Ready for external deviceAL29 RADD7/GADD7 O Address bus for external memory and peripheralAL30 RADD8/GADD8 O Address bus for external memory and peripheralAL31 RADD9/GADD9 O Address bus for external memory and peripheralAL32 RADD10/GADD10 O Address bus for external memory and peripheralAL33 RADD11/GADD11 O Address bus for external memory and peripheralAM1 VOID - This pin is not ball.AM2 GND - Ground for digital and DDR2 SDRAMAM3 GND - Ground for digital and DDR2 SDRAMAM4 GND - Ground for digital and DDR2 SDRAMAM5 D1DM3 I/O DDR2 Data MaskAM6 GND - Ground for digital and DDR2 SDRAMAM7 GND - Ground for digital and DDR2 SDRAMAM8 D1Q19 I/O DDR2 Data Input/OutputAM9 GND - Ground for digital and DDR2 SDRAM
AM10 GND - Ground for digital and DDR2 SDRAMAM11 D1Q23 I/O DDR2 Data Input/OutputAM12 GND - Ground for digital and DDR2 SDRAMAM13 D1CS0B O DDR2 Chip Select
6-E
BDP-BX1/S350
Pin No. Name I/O DescriptionAM14 D1ADD5 O DDR2 Address OutputAM15 D1VDD18 - 1.8V supply (DDR2 SDRAM)AM16 D1BA1 O DDR2 Bank AddressAM17 D1DM0 I/O DDR2 Data MaskAM18 GND - Ground for digital and DDR2 SDRAMAM19 GND - Ground for digital and DDR2 SDRAMAM20 D1Q2 I/O DDR2 Data Input/OutputAM21 GND - Ground for digital and DDR2 SDRAMAM22 GND - Ground for digital and DDR2 SDRAMAM23 D1Q9 I/O DDR2 Data Input/OutputAM24 GND - Ground for digital and DDR2 SDRAMAM25 GND - Ground for digital and DDR2 SDRAMAM26 NWEB O Write enable for NAND Flash ROMAM27 NRBB I Ready/Busy for NAND Flash ROMAM28 GCSB0 O Chip select for external deviceAM29 RADD3/GADD3 O Address bus for external memory and peripheralAM30 RADD4/GADD4 O Address bus for external memory and peripheralAM31 RADD5/GADD5 O Output enable for NAND FLASH ROMAM32 RADD6/GADD6 O Address bus for external memory and peripheralAM33 VOID - This pin is not ball.AN1 VOID - This pin is not ball.AN2 VOID - This pin is not ball.AN3 D1DQS3 I/O DDR2 Positive Data StrobeAN4 D1DQS3B I/O DDR2 Negative Data StrobeAN5 GND - Ground for digital and DDR2 SDRAMAN6 D1CLK1 O DDR2 Positive ClockAN7 D1CLK1B O DDR2 Negative ClockAN8 GND - Ground for digital and DDR2 SDRAMAN9 D1DQS2 I/O DDR2 Positive Data StrobeAN10 D1DQS2B I/O DDR2 Negative Data StrobeAN11 GND - Ground for digital and DDR2 SDRAMAN12 D1ODT0 O DDR2 On Die terminal controlAN13 D1ADD8 O DDR2 Address OutputAN14 D1VDD18 - 1.8V supply (DDR2 SDRAM)AN15 D1ADD1 O DDR2 Address OutputAN16 D1Q7 I/O DDR2 Data Input/OutputAN17 GND - Ground for digital and DDR2 SDRAMAN18 D1DQS0 I/O DDR2 Positive Data StrobeAN19 D1DQS0B I/O DDR2 Negative Data StrobeAN20 GND - Ground for digital and DDR2 SDRAMAN21 D1CLK0 O DDR2 Positive ClockAN22 D1CLK0B O DDR2 Negative ClockAN23 GND - Ground for digital and DDR2 SDRAMAN24 D1DQS1 I/O DDR2 Positive Data StrobeAN25 D1DQS1B I/O DDR2 Negative Data StrobeAN26 GND - Ground for digital and DDR2 SDRAMAN27 NFOEB O Output enable for NAND FLASH ROMAN28 VDD3 - 3.3V supply (I/O buffers)AN29 RADD0/GADD0 O Address bus for external memory and peripheralAN30 RADD1/GADD1 O Address bus for external memory and peripheralAN31 RADD2/GADD2 O Address bus for external memory and peripheralAN32 VOID - This pin is not ball.AN33 VOID - This pin is not ball.
7-
BDP-BX1/S350SECTION 7
SERVICE MODEM
ain
Func
tions
Laun
chin
g th
e se
rvic
e m
ode
Turn
on
the
AC
pow
er fr
om th
e of
f sta
te w
hile
hol
ding
dow
n sp
ecifi
c ke
ys (<
PLA
Y>
key,
<S
TOP
> ke
y an
d <O
PE
N/C
LOS
E>
key)
on th
e fro
nt p
anel
. Rel
ease
the
keys
whe
n “S
ERVI
CE”
appe
ars
on th
e fro
nt d
ispl
ay tu
be.
The
unit
is in
the
serv
ice
mod
e w
hen
the
serv
ice
mod
e sc
reen
app
ears
on
the
mon
itor.
Per
form
ope
ratio
n us
ing
the
rem
ote
cont
rol.
Erro
rLog
/Com
man
dLog
disp
lay
Dis
play
s th
e er
ror l
og a
nd c
omm
and
log.
Dis
play
ed c
onte
nts
can
also
be
save
d in
an
US
B m
emor
y de
vice
.
Dia
gP
erfo
rms
unit
test
of d
evic
es in
stal
led
on th
e bo
ard.
Fact
ory
Initi
aliz
eR
esto
res
the
set t
o its
fact
ory
setti
ngs.
Net
wor
kC
heck
s th
e ne
twor
k co
nnec
tion.
(1) “
Ifcon
fig”d
ispl
ays
the
netw
ork
setti
ngs
of th
e se
t.Ex
ecut
ing
this
func
tion
will
run
the
#ifc
onfig
com
man
d an
d di
spla
y th
e re
sult.
(2) “
Pin
g”ch
ecks
the
com
mun
icat
ion
stat
us b
etw
een
the
netw
ork
and
term
inal
of t
he s
peci
fied
IP a
ddre
ss.
Exec
utin
g th
is fu
nctio
n w
ill ru
n th
e #p
ing
com
man
d an
d di
spla
y th
e re
sult.
Vers
ion
Up
(ver
sion
upd
ate)
Per
form
s ve
rsio
n up
date
usi
ng a
dis
c.
Sys
tem
Info
rmat
ion
Dis
play
s th
e sy
stem
info
rmat
ion
of th
e se
t.D
ispl
ays
info
rmat
ion
such
as
the
softw
are
vers
ion,
driv
e in
form
atio
n, e
tc.
7-
BDP-BX1/S350
Men
u Tr
ee
Ser
vice
Mod
e M
enu
[1] D
iag
[2] L
og[3
] Fac
tory
Initi
aliz
e[4
] Net
wor
k[5
] Ver
sion
Up
[6] S
yste
m In
form
atio
n
Ser
vice
Mod
e M
enu
[1] D
iag
[2] L
og[3
] Fac
tory
Initi
aliz
e[4
] Net
wor
k[5
] Ver
sion
Up
[6] S
yste
m In
form
atio
n
Ver
sion
Up
Ver
sion
upd
ate
usin
g D
ISC
Ver
sion
Up
Ver
sion
upd
ate
usin
g D
ISC
Sys
tem
Info
rmat
ion
Dis
play
s sy
stem
info
rmat
ion
Sys
tem
Info
rmat
ion
Dis
play
s sy
stem
info
rmat
ion
Fac
tory
Initi
aliz
eR
esto
res
set t
o fa
ctor
y se
tting
sF
acto
ry In
itial
ize
Res
tore
s se
t to
fact
ory
setti
ngs
Log
Dis
play
s E
rror
Log
/Com
man
d Lo
gL
ogD
ispl
ays
Err
or L
og/C
omm
and
Log
Erro
r Log
Dis
play
s er
ror l
ogE
rror L
ogD
ispl
ays
erro
r log
Com
man
d Lo
gD
ispl
ays
com
man
d lo
gC
omm
and
Log
Dis
play
s co
mm
and
log
Dia
gD
iag
(sel
f-dia
gnos
is to
ol)
Dia
gD
iag
(sel
f-dia
gnos
is to
ol)
Net
wor
kN
etw
ork
diag
nosi
sN
etw
ork
Net
wor
k di
agno
sis
Ping Che
cks
com
mun
icat
ion
stat
us o
f net
wor
kPi
ng Che
cks
com
mun
icat
ion
stat
us o
f net
wor
k
Sta
tus
Che
cks
netw
ork
setti
ngs
Sta
tus
Che
cks
netw
ork
setti
ngs
Dev
ice
Test
Uni
t tes
t of b
oard
dev
ices
Dev
ice
Test
Uni
t tes
t of b
oard
dev
ices
Vid
eoP
ath
Test
Vid
eo o
utpu
t tes
tV
ideo
Pat
h Te
stV
ideo
out
put t
est
Aud
io P
ath
Test
Aud
io o
utpu
t tes
tA
udio
Pat
h Te
stA
udio
out
put t
est
7-
BDP-BX1/S350
Ser
vice
Mod
e M
enu
[1] D
iag
[2] L
og[3
] Fac
tory
Initi
aliz
e[4
] Net
wor
k[5
] Ver
sion
Up
[6] S
yste
m In
form
atio
n
HEL
P : [
DO
WN
] [EN
T] [(
NU
M)]
Serv
ice
Mod
e M
enu
(Top
Men
u)
Des
crip
tion:
This
is th
e to
p m
enu
of s
ervi
ce m
ode.
Eac
h fu
nctio
n is
acc
esse
d fro
m th
is s
cree
n.
Ope
ratio
n:[1
]M
oves
to D
iag
scre
en[2
]M
oves
to L
og (E
rror
Log
/Com
man
d Lo
g di
spla
y) s
cree
n[3
]M
oves
to F
acto
ry In
itial
ize
(fact
ory
setti
ngs)
scr
een
[4]
Mov
es to
Net
wor
k sc
reen
[5]
Mov
es to
Ver
sion
Up
(DIS
C v
ersi
on u
pdat
e) s
cree
n[6
]M
oves
to S
yste
mIn
form
atio
n (s
yste
m in
form
atio
n di
spla
y) s
cree
n[U
P] [
DO
WN
]M
oves
the
curs
or[E
NT]
Mov
es to
the
scre
en o
f the
item
sel
ecte
d w
ith th
e cu
rsor
C
urso
r is
not d
ispl
ayed
whe
n th
e m
enu
is fi
rst d
ispl
ayed
.
Dis
play
tube
:Te
st a
ppea
rs o
n th
e re
spec
tive
disp
lay
tube
whe
n op
erat
ing
the
curs
or o
r men
u ke
ys.
“SE
RV
ICE
”is
sele
cted
by
defa
ult.
Cha
ract
er s
tring
s di
spla
yed
on th
e di
spla
y tu
be:
Dia
gS
-DIA
GLo
gS
-LO
GFa
ctor
yIn
itial
ize:
S-F
INIT
Net
wor
k:S
-NE
TV
ersi
on U
p:S
-VU
PS
yste
m In
form
atio
n:S
-INFO
HEL
P (c
urre
ntly
ava
ilabl
e ke
ys, e
tc.)
is d
ispl
ayed
[1] D
iag
7-
BDP-BX1/S350
Dia
g(D
evic
e Te
st)
Des
crip
tion:
This
scr
een
is u
sed
to te
st d
evic
es m
ount
ed o
n th
e bo
ard.
This
scr
een
is a
lso
used
to p
erfo
rm v
ideo
and
aud
io te
sts.
Scre
en 1
: Sel
ects
the
test
cat
egor
yO
pera
tion:
[LE
FT] [
RIG
HT]
Sel
ects
the
cate
gory
[DO
WN
] [E
NT]
Mov
es to
the
sele
cted
cat
egor
y
Scre
en 2
: Dev
ice
test
Sel
ects
the
devi
ce to
test
afte
r sel
ectin
g D
evic
e Te
st in
scr
een
1.O
pera
tion:
[LE
FT] [
RIG
HT]
Sel
ects
the
devi
ce to
test
[EN
T]E
xecu
tes
the
test
[UP
]R
etur
ns to
sel
ectio
n of
test
cat
egor
yS
elec
ts th
e cu
rsor
dur
ing
IFC
onan
d D
term
inal
test
s[D
OW
N]
Sel
ects
the
curs
or d
urin
g IF
Con
and
D te
rmin
al te
sts
>Lis
t of t
est c
ateg
orie
sD
evic
e Te
stVi
deo
Test
Aud
io T
est
>Dev
ice
Test
: Lis
t of d
evic
esU
SB
Hos
t(1
)D
/A C
onve
rter (2
)D
term
inal
(3)
<-C
heck
usi
ng m
easu
rem
ent d
evic
eIfc
on<-
Che
ck u
sing
vis
ual i
nspe
ctio
n
1) O
utpu
t of v
ario
us lo
gs c
an b
e pe
rform
ed fo
r the
firs
t US
B h
ost c
heck
onl
y. L
ogs
cann
ot b
e ou
tput
for f
ollo
win
g ch
ecks
.2
) 8 [c
h] D
/A C
onve
rter t
est i
s no
t ava
ilabl
e fo
r the
bas
ic m
odel
.3
) JP
mod
els
only
Dis
play
tube
:C
ateg
ory
sele
cted
:D
evic
e Te
st: D
-DEV
Vide
o Te
st: D
-VID
EO
Audi
o Te
st: D
-AU
DIO
Dev
ice
sele
cted
:U
SB
Hos
t: D
-USB
D/A
Con
verte
r : D
-DAC
D T
erm
inal
: D-T
ERM
US
B H
ost c
heck
ed:
: USB
CH
KAl
l ite
ms
OK
: USB
OK
Oth
er th
an a
bove
: USB
NG
D/A
Con
verte
rche
cked
:: D
ACC
HK
All i
tem
s O
K: D
ACO
KO
ther
than
abo
ve: D
AC N
G
(Scr
een
1)
Dia
g
Cat
egor
y:
(Scr
een
2)
Dia
g
Cat
egor
y: D
evic
e Te
stD
evic
e:
USB
Med
ia c
heck
... N
GR
egis
ter R
ead
chec
k ...
OK
Reg
iste
r Rea
d ch
eck
...
Che
ckin
g...
HEL
P: [R
IGH
T] [U
P] [E
NT]
[RET
]
USB
Hos
t
Dev
ice
Test
7-
BDP-BX1/S350
(Scr
een
1)
Sele
ct L
og
[2] C
omm
and
Log
HEL
P : [
DO
WN
][EN
T][(N
UM
)]
Log:
Err
or L
og/C
omm
and
Log
(Out
put o
f eac
h Lo
g)
Des
crip
tion:
This
scr
een
disp
lays
the
cont
ents
of e
ach
log.
Scre
en 1
: Sel
ects
the
type
of l
og to
dis
play
Ope
ratio
n:[1
]M
oves
to th
e E
rror
Log
out
put s
cree
n[2
]M
oves
to th
e C
omm
and
Log
outp
ut s
cree
n[U
P] [
DO
WN
]M
oves
the
curs
or[E
NT]
Mov
es to
the
item
sel
ecte
d w
ith th
e cu
rsor
[RE
T]R
etur
ns to
the
top
men
u of
the
serv
ice
mod
e
Scre
en 2
: Dis
play
s th
e E
rror
Log
Ope
ratio
n:[L
EFT
]R
etur
ns to
the
prev
ious
pag
e[R
IGH
T]M
oves
to th
e ne
xt p
age
[RE
T]R
e tur
ns to
the
scre
en (s
cree
n 1)
that
sel
ects
the
log
type
[RED
]W
rites
the
log
cont
ents
to a
n U
SB m
emor
y de
vice
Scre
en 3
: Dis
play
s th
e C
omm
and
Log
Ope
ratio
n:[L
EFT
]R
etur
ns to
the
prev
ious
pag
e[R
IGH
T]M
oves
to th
e ne
xt p
age
[RE
T]R
etur
ns to
the
scre
en (s
cree
n 1)
that
sel
ects
the
log
type
[RED
]W
rites
the
log
cont
ents
to a
n U
SB m
emor
y de
vice
Dis
play
tube
:Lo
g ty
pe s
elec
ted
Err
or L
og: S
-ELO
GC
omm
and
Log:
S-C
LOG
Dur
ing
log
disp
lay
Pag
e di
spla
y ex
) 1/5
0
>Vie
win
g th
e lo
g di
spla
yE
rror
Log
: 001
08/0
1/01
00:
53:
19:
[Err
Cod
e: 0
8040
0000
000]
[Num
ber (
star
ting
from
old
log)
] [d
ate]
[tim
e] [e
rror
cod
e]C
omm
and
Log:
0001
08/
01/0
1 00
: 53:
19:
0 P
OW
ER
0[N
umbe
r (st
artin
g fro
m o
ld lo
g) ]
[dat
e] [t
ime]
[cou
nt] [
com
man
d na
me]
[E
dge
0: o
n 1:
off]
Abo
ut c
opyi
ng lo
g to
USB
mem
ory
devi
ceP
ress
the
[RED
] but
ton
in e
ach
log
disp
lay
scre
en w
ith th
e U
SB m
emor
y de
vice
inse
rted
into
the
set
Err
or L
og: W
hen
getE
rrLo
gFile
.trm
file
exis
ts in
the
US
B m
emor
y de
vice
,er
rlog.
log
file
is o
utpu
t.C
omm
and
Log:
Whe
n ge
tCm
dLog
File
.trm
file
exis
ts in
the
USB
mem
ory
devi
ce,
cmdl
og.lo
g fil
e is
out
put.
Thi
s fu
nctio
n ca
nnot
be
used
whe
n pe
rform
ing
USB
Hos
t tes
t in
the
Dia
gsc
reen
.W
ritin
g to
an
USB
mem
ory
devi
ces
take
s a
few
sec
onds
. Wai
t suf
ficie
ntly
bef
ore
rem
ovin
gde
vice
.
(Scr
een
2)
Erro
r Log
001
08/0
1/01
00:
53:
19:
[Err
Cod
e: 0
8040
0000
000]
002
08/0
1/01
00:
53:
45:
[Err
Cod
e: 0
8040
0252
100]
003
08/0
1/01
00:
54:
00:
[Err
Cod
e: 0
8040
0005
555]
: :
[1] E
rror
Log
(Scr
een
3)
Com
man
d Lo
g
0001
08/
01/0
1 00
: 53:
19:
0
POW
ER
000
02 0
8/01
/01
00: 5
3: 4
5:
1 PO
WER
100
03 0
8/01
/01
00: 5
4: 0
0: 7
9 O
PEN
_CLO
SE
0: :
< Pa
ge 1
/50
>
7-
BDP-BX1/S350
Dia
g(V
ideo
/Aud
io T
est)
Des
crip
tion:
This
scr
een
perfo
rms
vide
o an
d au
dio
test
s.
Scr
een
1: W
hen
vide
o te
st c
ateg
ory
is s
elec
ted
Ope
ratio
n:[E
NT]
Sho
ws/
hide
s th
e co
lor b
ar[U
P] [
RE
T]R
etur
ns to
the
sele
ctio
n of
test
cat
egor
y
Scr
een
2: W
hen
audi
o te
st c
ateg
ory
is s
elec
ted
Ope
ratio
n:[E
NT]
Pla
ys b
ack/
stop
s th
e to
ne s
ound
[UP
] [R
ET]
Ret
urns
to th
e se
lect
ion
of te
st c
ateg
ory
>Vid
eo te
stO
utpu
ts a
col
or to
all
outp
ut te
rmin
als.
(In th
e ca
se o
f HD
MI,
the
devi
ce m
ust b
e co
nnec
ted
whe
n la
unch
ing
the
func
tion)
>Aud
io te
stO
utpu
ts a
tone
sou
nd to
all
outp
ut te
rmin
als.
(In th
e ca
se o
f HD
MI,
the
devi
ce m
ust b
e co
nnec
ted
whe
n la
unch
ing
the
func
tion)
Dis
play
tube
:D
urin
g vi
deo
test
:D
-VID
EO
Dur
ing
audi
o te
st:
D-A
UD
IO
(Scr
een
1)
Dia
g
Cat
egor
y: V
ideo
Tes
t
HEL
P:[U
P][E
NT]
[RET
]
(Scr
een
2)
Dia
g
Cat
egor
y: A
udio
Tes
t
HEL
P: [U
P] [E
NT]
[RET
]
[EN
T] S
how
Col
or B
ar
[EN
T] G
ener
ate
TON
E So
und
7-7
BDP-BX1/S350
(Scr
een
1)
Fact
ory
Initi
aliz
e
[EN
T] S
tart
Initi
aliz
e[R
ET] R
etur
n to
Top
Men
u
Fact
ory
Initi
aliz
e (F
acto
ry S
ettin
gs)
Des
crip
tion:
This
scr
een
retu
rns
the
set t
o th
e fa
ctor
y se
tting
s.A
ll ch
ange
s se
tting
s w
ill b
e re
stor
ed to
the
fact
ory
setti
ngs,
and
all
save
d tit
les
will
be
dele
ted.
Not
e th
at e
xecu
ting
this
func
tion
does
not
com
plet
e th
ein
itial
izat
ion
proc
ess.
The
initi
aliz
atio
n pr
oces
s is
com
plet
ed b
y re
boot
ing
the
set a
fter o
pera
tion
is
perfo
rmed
.N
orm
al re
boot
ing
is re
quire
d fo
r the
initi
aliz
atio
n to
take
effe
ct. I
nitia
lizat
ion
is n
ot
com
plet
e w
hen
rebo
otin
g in
spe
cial
mod
es s
uch
as th
e se
rvic
e m
ode.
Scr
een
1P
ress
[EN
T] in
this
scr
een
whe
n re
stor
ing
the
set t
o its
fact
ory
setti
ngs.
All
save
d tit
les
will
als
o be
del
eted
.O
pera
tion:
[EN
T]I n
itial
ize
the
set t
o its
fact
ory
setti
ngs
[RE
T]R
etur
n to
the
top
men
u of
the
serv
ice
mod
e
Scr
een
2Th
is is
the
scre
en th
at is
dis
play
ed a
fter p
erfo
rmin
g in
itial
izat
ion.
The
initi
aliz
atio
n pr
oces
s is
com
plet
ed b
y re
boot
ing
the
set.
Rem
ove
the
AC
pow
er c
ord
and
inse
rt th
e A
C p
ower
cor
d ag
ain.
Ope
ratio
ns in
oth
er s
ervi
ce m
enus
can
als
o be
per
form
ed.
Dis
play
tube
:D
urin
g in
itial
izat
ion:
SE
TTIN
GW
hen
initi
aliz
atio
n is
OK
:IN
IT- O
K (S
cree
n 2)
Whe
n in
itial
izat
ion
is N
G:
INIT
-NG
(Scr
een
2)
Fact
ory
Initi
aliz
e
Reb
oot t
o co
mpl
ete.
[RET
] Ret
urn
to T
op M
enu
HEL
P: [R
ET]
7-
BDP-BX1/S350
(Scr
een
1)
Net
wor
k
Test
:
Ping
Net
wor
k (N
etw
ork
Test
Dia
gnos
is S
cree
n: If
conf
ig)
Des
crip
tion:
Net
wor
k m
enu
Eac
h ne
twor
k di
agno
sis
func
tion
is a
cces
sed
from
this
scr
een.
Scr
een
1: If
conf
igte
stO
pera
tion:
[EN
T]E
xecu
tes
the
Ifcon
figco
mm
and
(dis
play
s ne
twor
k se
tting
s)[R
IGH
T]M
oves
to th
e P
ing
test
[RTN
]R
etur
ns to
the
top
men
u of
the
serv
ice
mod
e
Scr
een
2: P
ing
test
Scr
een:
[LE
FT]
Mov
es to
the
Ifcon
figte
st[R
TN]
Ret
urns
to th
e to
p m
enu
of th
e se
rvic
e m
ode
See
nex
t pag
e fo
r det
ails
on
Pin
g te
st
Scr
een
3: W
hen
exec
utin
g th
e Ifc
onfig
test
Dis
play
s th
e ou
tput
resu
lt of
the
Ifcon
figco
mm
and
Ope
ratio
n:[E
NT]
Exe
cute
s th
e co
mm
and
agai
n[R
IGH
T]M
oves
to th
e P
ing
test
[RTN
]R
etur
ns to
the
top
men
u of
the
serv
ice
mod
e
Dis
play
tube
:S
-NE
T
(Scr
een
2)
Net
wor
k
Test
: Ifc
onfig
Ping
To :
[STA
RT]
Ping
To:
Ping
Ifcon
fig
(Scr
een
3)
Net
wor
k
Test
:
Ping
Link
enc
ap: E
ther
net
HW
addr
00: 1
6: 0
1: 8
5: 2
1: A
3
inet
addr
: 43.
17.1
10.2
25 B
cast
: 43.
17.1
10.2
55 M
ask:
255
.255
.255
.0in
et6
addr
: fe8
0:: 2
16: 1
ff: fe
85: 2
1a3/
64 S
cope
: Lin
kU
P B
RO
AD
CA
ST R
UN
NIN
G M
ULT
ICA
ST M
TU: 1
500
Met
ric: 1
RX
pack
ets:
533
280
erro
rs: 0
dro
pped
: 0 o
verr
uns:
0 fr
ame:
0TX
pac
kets
: 219
639
erro
rs: 0
dro
pped
: 0 o
verr
uns:
0 c
arrie
r: 0
colli
sion
s: 0
txqu
euel
en: 1
000
RX
byte
s: 4
4569
483
(42.
5 M
iB)
TX b
ytes
: 462
0630
0 (4
4.0
MiB
)In
terr
upt:
217
Bas
e ad
dres
s: 0
x9c0
0
HEL
P: [E
NT]
: Re/
Exe
[RIG
HT]
Ifcon
fig
M
ay d
iffer
slig
htly
from
the
actu
al s
cree
ns
7-
BDP-BX1/S350
Net
wor
k (N
etw
ork
Test
Dia
gnos
is S
cree
n: P
ing)
Des
crip
tion:
Pin
gte
st
Scr
een
1: P
ing
test
Ope
ratio
n:[U
P]
Set
s th
e IP
add
ress
of t
he P
ing
dest
inat
ion
[DO
WN
]P
repa
res
for e
xecu
tion
[RTN
]R
etur
ns to
the
top
men
u of
the
serv
ice
mod
e
Scr
een
2: S
peci
fies
the
IP a
ddre
ss o
f the
Pin
g de
stin
atio
n (IP
inpu
t mod
e)P
ing
To: I
nput
the
IP a
ddre
ss b
y pr
essi
ng [E
NT]
whe
n hi
ghlig
hted
Ope
ratio
n:[E
NT]
End
s in
put
[RTN
]E
nds
inpu
t[L
EFT
]E
n ds
inpu
t, an
d m
oves
to th
e Ifc
onfig
test
[ (N
UM
) ]In
puts
cha
ract
ers
‘0-9
’[T
IME
]I n
puts
cha
ract
er ‘.
’[C
LEA
R]
Bac
k sp
ace
Scr
een
3: W
hen
exec
utin
g P
ing
test
Pin
g is
exe
cute
d w
hen
pres
sing
[EN
T] w
hile
[STA
RT]
is h
ighl
ight
ed.
Ope
ratio
n:[E
NT]
Exe
cute
s th
e P
ing
test
[UP
]S
ets
the
IP a
ddre
ss o
f the
Pin
g de
stin
atio
n[D
OW
N]
Pr e
pare
s fo
r exe
cutio
n[R
TN]
Ret
urns
to th
e to
p m
enu
of th
e se
rvic
e m
ode
Dis
play
tube
:S
-NE
T
(Scr
een
1)
Net
wor
k
Test
: Ifc
onfig
Ping
To :
[STA
RT]
Ping
To:
Ping
(Scr
een
2)
Net
wor
k
Test
: Ifc
onfig
Ping
To :
[EN
T]: R
elea
se[R
ET]:
Rel
ease
[LEF
T] :
Ifcon
figTe
st[(N
UM
)]: ‘0
-9’
[TIM
E] :
‘.’[C
LEA
R]:
Bac
kspa
ce
Ping
To:
> 1
72.1
6.20
0.13
Ping
(Scr
een
3)
Net
wor
k
Test
: Ifc
onfig
Ping
To:1
72.1
6.20
0.13
PIN
G 1
72.1
6.20
0.13
(172
.16.
200.
13) 5
6 (8
4) b
ytes
of d
ata.
64 b
ytes
from
172
.16.
200.
13: i
cmp_
seq=
0 ttl
=64
time=
0.02
2 m
s
---17
2.16
.200
.13
ping
sta
tistic
s ---
1 pa
cket
s tr
ansm
itted
, 1 re
ceiv
ed, 0
% p
acke
t los
s, ti
me
0ms
rttm
in/a
vg/m
ax/m
dev=
0.02
2/0.
022/
0.02
2/0.
000
ms,
pip
e 2
HEL
P: [E
NT]
: Sta
rt [U
P] [L
EFT]
Ping
M
ay d
iffer
slig
htly
from
the
actu
al s
cree
ns
[STA
RT]
7-0
BDP-BX1/S350
(Scr
een
1)
Vers
ion
Upd
ater
[EN
T] S
tart
Upd
ate
[RET
] Ret
urn
to T
op M
enu
HEL
P : [
ENT]
[RET
]
Vers
ion
Up
(Ver
sion
Upd
ate
usin
g D
ISC
)
Des
crip
tion:
This
scr
een
perfo
rms
vers
ion
upda
tes
usin
g D
ISC
.
Scr
een
1: S
cree
n w
hen
ente
ring
the
Ver
sion
Up
men
uO
pera
tion:
[EN
T]S
tarts
upd
ate
usin
g D
ISC
-> (o
pens
tray
and
dis
play
s sc
reen
2)
[RE
T]R
e tur
ns to
the
top
men
u of
the
serv
ice
mod
e
Scr
een
2: In
sert
vers
ion
upda
te D
ISC
Ope
ratio
n:[E
NT]
Clo
s es
the
tray
and
chec
ks th
e D
ISC
[RE
T]C
a nce
ls o
pera
tion
(clo
ses
the
tray
and
retu
rns
to s
cree
n 1)
Scr
een
3: D
urin
g ch
eck
-> O
KO
pera
tion:
Aut
omat
ical
ly re
boot
s th
e se
t
Scr
een
4: D
urin
g ch
eck
-> N
GO
pera
tion:
Out
puts
[Err
or] (
cont
ent o
f err
or) a
nd re
turn
s to
scr
een
2
Dis
play
tube
:W
hen
DIS
C is
inse
rted
V-IN
SC
DW
hen
DIS
C c
anno
t be
mou
nted
V-N
OD
SC
Whe
n ch
eck
is N
GV
-CH
KN
GW
hen
chec
k is
OK
V-C
HK
OK
Whe
n re
boot
ing
RE
BO
OT
(Scr
een
2)
Vers
ion
Upd
ater
Inse
rt u
pdat
e D
ISC
...
[EN
T] T
ray
Clo
se a
nd C
heck
sta
rt[R
ET] C
ance
l
HEL
P: [E
NT]
[RET
]
(Scr
een
3)
Vers
ion
Upd
ater
Now
, mou
ntin
g an
d ch
ecki
ng...
OK
(Scr
een
4)
Vers
ion
Upd
ater
Now
, mou
ntin
g an
d ch
ecki
ng...
[Err
or] C
an’t
use
DIS
C!
HEL
P: [E
NT]
[RET
]
7-E
BDP-BX1/S350
Syst
em In
form
atio
n (S
yste
m In
form
atio
n D
ispl
ay)
Des
crip
tion:
This
scr
een
disp
lays
sys
tem
info
rmat
ion.
Ope
ratio
n:[E
NT]
Mea
sure
s IO
Pof
the
driv
e (ta
kes
a fe
w s
econ
ds: 1
tim
e on
ly)
[RE
T]R
etur
ns to
the
top
men
u of
the
serv
ice
mod
e
Whe
n m
easu
ring
IOP
,V
ersi
on U
p fu
nctio
n in
the
Ser
vice
Mod
e m
enu
will
no
long
er b
eav
aila
ble.
Dis
play
ed c
onte
nts:
Mod
el n
ame
Mod
elD
estin
atio
nD
est
IPad
dres
sIP
Mac
addr
ess
Mac
CP
Uve
rsio
nC
PU
<-[F
irmV
ersi
on] [
Gen
erat
ionV
ersi
on]
NB
L ve
rsio
nN
BL
Ker
nel v
ersi
onK
erne
lH
ost v
ersi
onH
ost
<-[
Hos
tVer
sion
] [R
elea
seV
ersi
on]
Opt
ical
dis
c dr
ive
Driv
e <
-[M
odel
] [Fi
rmR
evis
ion]
[Ser
ialN
umbe
r]D
rive
usag
e tim
eLD
Tim
e [
Med
ia]:
[LD
Tim
e]/[
IOP
] /
IOP
/IO
PIO
Pte
mpe
ratu
re m
easu
rem
ent
dIO
P_T
EM
PIF
Con
vers
ion
IFC
on
<-B
0: [B
lock
0 ve
rsio
n]B
1:[B
lock
1 ve
rsio
n]IF
Con
Firm
date
Firm
Dat
eS
et te
mpe
ratu
reTe
mp
<-[
]
Dis
play
tube
:H
ost v
ersi
on d
ispl
ay0
1.0.
002
disp
laye
d as
010
002
Sy
stem
Info
rmat
ion
Mod
el: B
DP3
G-S
UD
est
: UC
IP: 1
72.1
6.10
2.32
Mac
: 00:
1a:8
0:d0
:47:
65C
PU: E
0.03
2.0[
F021
]N
BL
: BD
P3G
3.1
.0K
erne
l: B
DP3
G-3
.1.0
Hos
t: 0
1.0.
002
2008
0121
D00
...
Driv
e: B
DP2
00 1
.01
@B
PD00
0055
7&__
40LD
Tim
e: B
D: [
0:00
] / [
1
]/d
IOP
DVD
: [
0:
11] /
[
5]
CD
: [
0:
50] /
[
0]
dIO
P_TE
MP:
[
0]
Ifcon
: B0:
0x0
3
B1:
0x0
1Fi
rmD
ate:
03/
07 1
1:55
Tem
p: 3
4 [d
egC
][R
ET]
: Top
Men
u
8-
BDP-BX1/S350SECTION 8
TROUBLESHOOTINGM
ain
Flow
Sta
rt (a
nd re
turn
from
eac
h flo
w)
Yes
Doe
s th
e W
AIT
dis
play
app
ear o
n th
e FL
D in
abou
t 10
seco
nds
afte
r AC
IN?
No
To P
ower
(Sys
tem
) Flo
w
Yes
Doe
s th
e W
ELC
OM
E d
ispl
ay c
lear
in a
few
seco
nds
afte
r SW
on
of p
ower
?N
oR
epla
ce M
B b
oard
Yes
Doe
s th
e W
AIT
dis
play
app
ear o
n th
e FL
Daf
ter?
No
Yes
SY
S E
RR
dis
play
on
the
FLD
afte
r 20
- 30
seco
nds?
No
Doe
s th
e W
ELC
OM
E d
ispl
ay a
ppea
r on
the
FLD
whe
n pr
essi
ng th
e po
wer
but
ton
on th
efro
nt p
anel
?
No
Doe
s th
e W
ELC
OM
E d
ispl
ay a
ppea
r on
the
FLD
whe
n pr
essi
ng th
e po
wer
but
ton
on th
ere
mot
e co
ntro
l?
Yes
Yes
To F
L/FR
Flo
w
Doe
s X
MB
or S
ETU
P s
cree
n ap
pear
on
the
vide
o ou
t put
scr
een?
No
To A
V B
oard
Vid
eo S
ectio
n Fl
ow
Yes
Yes
Icon
s ca
n be
sel
ecte
d us
ing
arro
r key
s on
the
rem
ote
cont
rol
No
To F
L/FR
Flo
w
Yes
Ther
e ar
e di
sks
that
can
not b
e pl
ayed
bac
kN
oP
rope
r sou
nd is
out
put w
hen
play
ing
bac k
BD
, DV
D-R
OM
, etc
.N
oTo
AV
Boa
rd A
udio
Sec
tion
Flow
Yes
Yes
To D
rive
Flow
Pro
per v
ideo
app
ears
whe
n pl
ayin
g ba
ck B
D,
DV
D-R
OM
, etc
.N
oTo
AV
Boa
rd V
ideo
Sec
tion
Flow
Yes
Doe
s
app
ear o
n th
e co
mpo
site
vid
eoou
t put
scr
een?
No
To A
V B
oard
Vid
eo S
ectio
n Fl
owR
eche
ck s
ympt
om o
f cus
tom
er a
s C
ND
Yes
Is 5
V/1
2V p
ower
sup
plie
d to
the
driv
e?N
oTo
Driv
e P
ower
Flo
w
Yes
Sym
ptom
doe
s no
t im
prov
e ev
en w
hen
repl
acin
g S
ATA
cab
leN
oR
epla
ce S
ATA
cab
le
Yes
Sym
ptom
doe
s no
t im
prov
e ev
en w
hen
repl
acin
g dr
ive
No
Rep
lace
driv
e
Yes
Rep
lace
MB
boa
rd
8-
BDP-BX1/S350
Pow
er (S
yste
m) F
low
The
WA
IT d
ispl
ay d
oes
not a
ppea
r on
the
FLD
in a
bout
10
seco
nds
afte
r AC
IN
All
flexi
ble
harn
esse
s ar
e co
nnec
ted
No
Cor
rect
ly c
onne
ct fl
exib
le h
arne
sses
Yes
Is e
ach
volta
ge to
CN
101
of th
e IF
D b
oard
?S
ee in
terfa
ce d
iagr
am C
N00
1 fo
r vol
tage
valu
es
No
Rep
lace
pow
er b
lock
Yes
The
IC li
nks
belo
w a
re n
ot o
pen
IFD
boa
rd: P
S60
1,60
2M
B b
oard
: PS
302,
701
No
PS
601
is o
pen
To IF
D B
oard
Flo
wP
S60
2 is
ope
n R
epla
ce M
B b
oard
, the
nre
plac
e P
S60
2P
S30
2 an
d 70
1 ar
e op
en
Rep
lace
MB
boar
dY
es
The
IC li
nk b
elow
is n
ot o
pen
IFD
boa
rd: P
S60
3N
o
Rem
ove
pow
er h
arne
sses
bet
wee
n IF
DM
Bbo
ard
and
IFD
FR b
oard
and
then
che
ckth
e fo
llow
ing:
Sho
rt ci
rcui
t bet
wee
n IF
D b
oard
CN
102
(pin
s 3
- 5) a
nd G
ND
To IF
D B
oard
Flo
wS
hort
circ
uit b
etw
een
MB
boa
rdC
N30
1 (p
ins
3 - 5
) and
GN
DR
epla
ce M
B b
oard
and
then
repl
ace
P
S60
2S
hort
circ
uit b
etw
een
FR b
oard
CN
701
(pin
s 3
- 4) a
nd G
ND
To F
L/FR
Flo
w
Yes
Uni
t doe
s no
t rec
over
eve
n w
hen
repl
acin
gIF
D b
oard
No
To IF
D B
oard
Flo
w
Yes
Uni
t doe
s no
t rec
ove
even
whe
n re
plac
ing
MB
boa
rdN
oR
epla
ce M
B B
oard
Yes
To F
L/FR
Flo
w
8-
BDP-BX1/S350
Driv
e P
ower
Flo
w
5V/1
2V p
ower
is n
ot s
uppl
ied
to th
e dr
ive
Pow
er h
arne
ss is
con
nect
ed b
etw
een
the
pow
er b
lock
and
driv
eN
oC
orre
ctly
con
nect
the
harn
ess
Yes
Is th
ere
volta
ge h
ighe
r tha
n H
i (2.
5V) a
tpo
wer
blo
ck C
N20
3 pi
n 1
(ATA
-PC
ON
T)du
ring
P-O
N?
No
If th
e un
it re
cove
rs a
fter r
epla
cing
IFD
boa
rd,
then
got
o IF
D B
oard
Rep
air F
low
If th
e un
it re
cove
rs a
fter r
epla
cing
MB
boa
rd,
then
repl
ace
MB
boa
rdY
esR
emov
e th
e po
wer
har
ness
bet
wee
n th
epo
wer
blo
ck a
nd d
rive
Are
the
volta
ges
belo
w o
utpu
t to
pow
er b
lock
CN
201
durin
g P
-ON
?P
in 1
: 12±
1VP
in 4
: 5±0
.25V
No
Mal
func
tion
with
in p
ower
blo
ckR
epla
ce p
ower
blo
ck
Yes
Like
ly to
be
a m
alfu
nctio
n w
ithin
the
driv
eR
e pla
ce d
rive
8-
BDP-BX1/S350
IFD
Boa
rd F
low
Is e
ach
volta
ge s
uppl
ied
to C
N10
1?N
oR
epla
ce p
ower
blo
ckS
ee in
terfa
ce d
iagr
am_C
N10
1 fo
r vol
tage
valu
esY
esE
ach
volta
ge is
not
sup
plie
d to
CN
102
durin
gP
-ON
No
Rep
lace
IC40
2 m
icro
com
pute
rS
ee in
terfa
ce d
iagr
am_C
N10
2 fo
r vol
tage
valu
esY
es
PS
601,
602
and
603
are
not
ope
nN
oR
emov
e th
e IF
D b
oard
and
che
ck th
efo
llow
ing
for s
hort
circ
uits
. Are
ther
e an
ysh
ort c
ircui
ts?
No
Rep
lace
MB
boa
rd, a
nd th
en re
palc
e op
enIC
link
CN
102
pin
1 G
ND
,P
ins
(3-4
) G
ND
C61
9 G
ND
Yes
Yes
If C
619
is s
hort-
circ
uite
d, re
plac
e IC
602
and
603,
then
repl
ace
IC li
nk. O
ther
wis
e, re
aplc
eIF
D b
oard
.
Sig
nals
bel
ow (P
CO
NT)
are
Hi (
2.5V
or
high
er) d
urin
g P
-ON
No
Rep
lace
IC40
2 m
icro
com
pute
rIC
601
pin
1IC
602
pin
7IC
603
pin
7IC
604
pin
1IC
501
pin
1 Y
esC
heck
the
volta
ges
belo
w a
nd re
plac
e IC
that
are
NG
IC60
1 pi
n 4:
3.3
VIC
602
pin
3: 3
.3V
IC60
3 pi
n 3:
1.5
5VIC
604
pin
5: 5
VIC
501
pin
1: 1
0.7V
/ 8.2
V/ 7
V
8-
BDP-BX1/S350
AV
Boa
rd A
udio
Sec
tion
Flow
Is e
ach
pow
er s
uppl
ied
to th
e A
V b
oard
?N
oTo
Pow
er (S
yste
m) F
low
CN
001
pin
1 +
6VC
N00
1 p
in 3
-8V
CN
001
pin
5 +
12V
CN
203
pin
21
+5V
Yes
Sou
nd is
not
pro
perly
out
put
No
Vid
eo is
not
pro
perly
out
put
Yes
To A
V B
oard
Vid
eo S
ectio
n Fl
ow
Yes
Che
ck in
put o
f eac
h po
wer
No
Rep
lace
IC li
nk
Q00
1 em
itter
is -8
VR
epla
ce P
S10
1 if
Q00
1 is
NG
Q00
2 em
itter
is +
12V
Rep
lace
PS
102
if Q
002
is N
GIC
001
pin
5 is
+6V
IC00
1 pi
n 1
is +
5V
Yes
Che
ck o
utpu
t of e
ach
pow
erN
oR
epla
ce A
V b
oard
Q00
1 co
llect
or is
-8V
Re p
lace
IC00
1 if
IC00
1 is
NG
Q00
2 co
llect
or is
+12
VIC
001
pin
4 is
+5V
Yes
Is th
ere
inpu
t of a
udio
dig
ital s
igna
ls in
IC00
2?N
oR
epla
ce F
FC b
etw
een
CN
002
and
MB
boar
d. R
epla
ce M
B b
oard
if N
G.
IC00
2pi
n 1
MC
LKIC
002
pin
2 B
CLK
IC00
2pi
n 3
DA
TAIC
002
pin
4 LR
CK
Yes
Is th
ere
inpu
t of c
ontro
l sig
nals
in IC
002?
No
Rep
lace
FFC
bet
wee
n C
N00
2 an
d M
Bbo
ard.
Rep
lace
MB
boa
rd if
NG
.IC
002
pin
6 C
SN
IC00
2pi
n 7
CC
LKIC
002
pin
8 C
DTI
CN
002
pin
1X
AM
UTE
CN
002
pin
9 R
eset
Yes
Are
sig
nals
out
put f
rom
eac
h au
dio
outp
utte
rmin
al?
No
Rep
lace
AV
boa
rd
8-
BDP-BX1/S350
AV
Boa
rd V
ideo
Sec
tion
Flow
Che
ck in
put o
f eac
h po
wer
No
Rep
lace
IC li
nk
Q20
7 em
itter
is -8
VR
e pla
ce P
S20
1 if
Q20
7 is
NG
IC20
2 pi
n 5
is +
6VIf
IC20
2 is
NG
, che
ck th
e pa
ttern
from
CN
001
pin
1Y
es
Che
ck o
utpu
t of e
ach
pow
erN
oC
heck
the
cont
rol o
f eac
h po
wer
No
Che
ck c
ontro
l lin
es
Q20
7 co
llect
or is
-8V
Q20
1 em
itter
is 3
.3V
Re p
lace
R26
0 if
Q20
1 is
NG
IC20
2pi
n 4
is +
3.3V
IC20
2 pi
n 1
is 5
VR
epla
ce R
202
if IC
202
is N
G
Yes
Yes
Rep
lace
dev
ice
Rep
lace
Q20
7 if
Q20
7 co
llect
or is
NG
Rep
lace
IC20
2 if
IC20
2 pi
n 4
is N
G
Che
ck -5
V p
ower
No
Rep
lace
dev
ice
Q21
3 co
llect
or is
-5V
Re p
lace
Q21
3
Yes
Che
ck v
olta
ge b
efor
e an
d af
ter e
ach
coil
No
Rep
lace
dev
ice
L201
and
204
are
+3.
3VR
epla
ce L
201
and
204
L202
and
205
are
-5V
Re p
lace
L20
2 an
d 20
5L2
03 is
+5V
Re p
lace
L20
3
Yes
Is th
ere
inpu
t of v
ideo
sig
nals
?N
oR
epla
ce F
FC b
etw
een
CN
203
and
MB
boar
d. R
epla
ce M
B b
oard
if N
G.
Q20
3 ba
se Y
si g
nal
Q20
2 ba
se C
si g
nal
Q20
4 ba
se Y
si g
nal
Q20
5 ba
se C
b si
gnal
Q20
6 ba
se C
r si g
nal
Yes
Is th
ere
inpu
t of v
ideo
sig
nals
in IC
206?
No
Rep
lace
tran
sist
or, e
mitt
er re
sist
ance
Q20
3 em
itter
Y s
igna
lQ
202
emitt
er C
si g
nal
Q20
4 em
itter
Y s
i gna
lQ
205
emitt
er C
b si
gnal
Q20
6 em
itter
Cr s
i gna
l
Yes
Is th
ere
inpu
t of c
ontro
l sig
nals
in IC
206?
No
Rep
lace
FFC
bet
wee
n C
N20
3 an
d M
Bbo
ard.
Rep
lace
R23
2 an
d 23
3 if
NG
.R
epla
ce M
B b
oard
if N
G.
IC20
6pi
n 16
PS
1 (X
VM
UTE
+3.
3V)
IC20
6pi
n 15
PS
2 (X
VM
UTE
+3.
3V)
Yes
Is th
ere
outp
ut o
f sig
nals
from
eac
h vi
deo
out p
ut te
rmin
al?
No
Rep
lace
IC26
0. R
epla
ce A
V b
oard
if N
G.
8-
BDP-BX1/S350
FL/F
R F
low
(1/3
)
Pow
er b
utto
n on
the
mai
n un
it do
es n
ot w
ork
Doe
s sy
mpt
om im
prov
e w
hen
repl
acin
g th
eFL
boa
rd?
No
Yes
The
pote
ntia
l of p
in 1
of C
N30
1 do
es n
otch
ange
from
3.3
V to
nea
r 0V
whe
n pr
essi
ngth
e po
wer
but
ton
No
To IF
D B
oard
Flo
w
Yes
Dis
conn
ecte
d ha
rnes
s. R
epla
ce F
L bo
ard.
Key
ope
ratio
ns c
anno
t be
mad
e on
the
mai
n
Doe
s sy
mpt
om im
prov
e w
hen
repl
acin
g th
eFR
boa
rd?
No
Rep
lace
MB
boa
rdR
efer
ence
: Rel
atio
nshi
p of
But
tons
and
Vol
tage
s
Yes
Whi
ch ro
w o
f key
s do
not
ope
rate
?S
TOP
, PA
US
E b
utto
ns ->
To
Key
1 do
es n
o top
erat
eO
PE
N/C
LOS
E b
utto
n ->
To
Key
2 do
es n
otop
erat
eP
LAY
but
ton
-> T
o K
ey3
does
not
ope
rate
Ke y
1 do
es n
ot o
pera
te
Is th
ere
volta
ge o
f abo
ut 3
.3V
at p
in 1
3 of
CN
701
with
out p
ress
ing
the
keys
?N
oC
heck
3.3
V li
ne a
nd R
466
patte
rn o
f IFD
boar
d. R
epla
ce IF
D b
oard
if N
G.
Yes
Che
ck th
e re
sist
ance
of r
esis
tors
of K
ey1
line.
Als
o ch
eck
the
surr
ound
ing
patte
rn.
Key
2 do
es n
ot o
pera
te
Is th
ere
volta
ge o
f abo
ut 3
.3V
at p
in 1
4 of
CN
701
with
out p
ress
ing
the
keys
?N
oC
heck
3.3
V li
ne a
nd R
467
patte
rn o
f IFD
boar
d. R
epla
ce IF
D b
oard
if N
G.
Yes
Che
ck th
e re
sist
ance
of r
esis
tors
of K
ey2
line.
Als
o ch
eck
the
surr
ound
ing
patte
rn.
Key
3 do
es n
ot o
pera
te
Is th
ere
volta
ge o
f abo
ut 3
.3V
at p
in 1
4 of
CN
701
with
out p
ress
ing
the
keys
?N
oC
heck
3.3
V li
ne a
nd R
469
patte
rn o
f IFD
boar
d. R
epla
ce IF
D b
oard
if N
G.
Yes
Che
ck th
e re
sist
ance
of r
esis
tors
of K
ey3
line.
Als
o ch
eck
the
surr
ound
ing
patte
rn.
8-8
BDP-BX1/S350
FL/F
R F
low
(2/3
)
FLD
doe
s no
t lig
ht
Is th
ere
volta
ge o
f abo
ut 3
.3V
at P
S70
1?N
oTo
FLD
Sw
itch
Sur
roun
ding
Che
ck
Yes
Is th
ere
volta
ge o
f abo
ut -2
2V a
t JL7
01?
No
Che
ck th
e ci
rcui
ts s
urro
ungi
ng th
e FL
D D
C-
DC
CO
NV
ER
TER
.If
NG
, the
n re
plac
e FL
boa
rd.
Yes
Is th
ere
volta
ge o
f 3.3
V a
t pin
43
of IC
702?
No
Che
ck th
e 3.
3V li
ne o
f FR
boa
rd.
Yes
Is p
in 5
of I
C70
2 os
cilla
ting?
No
Rep
lace
IC70
2. If
no
effe
ct, r
epla
ce F
Lbo
ard.
Yes
Is th
ere
inpu
t of p
ulse
to p
ins
7, 8
and
9 o
fIC
702?
No
Rep
lace
FFC
bet
wee
n FR
and
IFD
. If n
oef
fect
, the
n go
toIF
D B
oard
Flo
wY
es
Che
ck c
onne
ctio
n of
FLD
and
IC10
0.R
epla
ce IC
100
if O
K.
If no
effe
ct, r
epla
ce th
e FL
boa
rd.
FLD
Sw
itch
Sur
roun
ding
Che
ck
Is th
e po
tent
ial o
f pin
3 o
f Q70
4 5.
8V?
No
Che
ck th
e 5.
8V li
ne o
f FR
boa
rd.
Yes
Is th
e po
tent
ial o
f the
bas
e of
Q70
4 ar
ound
5V?
No
Is th
e co
llect
or v
olta
ge o
f Q70
3 ab
out 0
V?
No
Is th
e vo
ltage
of t
he b
ase
of Q
703
at 3
.3V
?N
oIs
pin
7 o
f CN
701
at 3
.3V
?
Yes
Y
es
Yes
Yes
Rep
lace
Q70
4R
epla
ce Q
704
Rep
lace
Q70
3R
epla
ce F
R b
oard
8-
BDP-BX1/S350
FL/F
R F
low
(3/3
)
Rem
ote
cont
rol d
oes
not o
pera
te
Sym
ptom
impr
ove
whe
n re
plac
ing
FL b
oard
?N
oA
re th
ere
sign
als
to p
in 1
7 of
IFD
boa
rdC
N50
4?N
oR
epla
ce F
FC
Y
es
Are
ther
e si
gnal
s to
pin
24
of IC
402?
No
Che
ck IF
D b
oard
pat
tern
Yes
Y
es
To IF
D B
oard
Flo
w
Is th
ere
outp
ut o
f abo
ut 3
.3V
for p
oten
tial o
fpi
n 17
of C
N70
1?N
oC
heck
FR
boa
rd p
atte
rn
Yes
Dis
conn
ecte
d fle
xibl
e ha
rnes
s. R
epla
ce F
Rbo
ard.
8-0
BDP-BX1/S350
Driv
e Fl
ow
BD
P-B
X1/
S35
0 ca
n pl
ay th
e B
D-d
isc.
No
Che
ck D
rive
Pow
er S
uppl
y 1
2V/5
V?
No
To D
rive
Pow
er F
low
Y
es
Che
ck/re
plac
e th
e S
ATA
cab
le, a
nd c
heck
BD
P-B
X1/
S35
0 op
erat
es n
orm
ally
.N
o
Y
es
Yes
OK
BD
P-B
X1/
S35
0 ca
n pl
ay th
e D
VD
/CD
-dis
c.N
o
Yes
Che
ck th
e dr
ive
by d
rive
test
tool
.D
rive
is O
K?
No
Rep
lace
driv
e
Y
es
To M
ain
Flow
BLX
-104
DV
D T
ES
T D
ISC
HLX
-513
CD
TE
ST
DIS
C Y
ED
S-1
8
8-
BDP-BX1/S350
Fan
Flow
FAN
ER
R d
ispl
ay a
ppea
rs o
n th
e FL
D
Ent
er th
e se
rvic
e m
ode
and
set F
AN
to O
Nfro
m th
e Ifc
on m
enu
Is th
e vo
ltage
of p
in 3
of I
FD b
oard
CN
501
abou
t 10V
?N
oR
emov
e th
e ha
rnes
s fro
m th
e fa
n in
serte
d in
CN
501
of IF
D b
oard
. Is
the
volta
ge a
bout
10V
?
No
Is th
e vo
ltage
of p
in 1
of I
C50
1 of
the
IFD
boar
d ab
out 3
.3V
?N
oIs
ther
e a
disc
onne
ctio
n be
twee
n pi
n 1
ofC
N50
1 of
the
IFD
boa
rd a
nd p
in 5
8 of
IC40
2,or
brid
ged
with
adj
acen
t pin
s?
Yes
Yes
Yes
Is th
e fa
n tu
rnin
g?N
oR
epla
ce fa
nC
heck
aro
und
the
fan
pow
er (I
C50
1)
Yes
Is th
e Fa
nSta
te in
the
serv
ice
mod
e sc
reen
set t
o O
N?
No
Rem
ove
the
harn
ess
from
the
fan
inse
rted
inC
N50
1 of
the
IFD
boa
rd. D
oes
FanS
tate
inth
e se
rvic
e m
ode
scre
en tu
rn to
ON
whe
nsh
ort-c
ircui
ting
pins
1 a
nd 2
?
No
Is th
ere
a di
scon
nect
ion
betw
een
pin
2 of
CN
501
of th
e IF
D b
oard
and
pin
55
of IC
402,
or b
ridge
d w
ith a
djac
ent p
ins?
Yes
Che
ck to
see
for o
bjec
ts b
lock
ing
the
fan
blad
esIf
none
, rep
lace
fan
Rep
lace
fan
8-
BDP-BX1/S350
Eth
er F
low
Can
not c
onne
ct to
net
wor
k. C
anno
t per
form
netw
ork
u pda
te.
Is th
e LA
N c
able
cor
rect
ly in
serte
d?N
oS
ecur
ely
inse
rt th
e LA
N c
able
Yes
Is th
e H
UB
rout
er L
ED
on
(LIN
K L
ED
)?N
oIs
pow
er in
put t
o th
e M
B b
oard
?N
oTo
Pow
er (S
yste
m) F
low
Yes
Yes
Rep
lace
MB
boa
rd
Are
net
wor
k se
tting
s in
the
men
u co
rrec
t?N
oC
orre
ctly
set
net
wok
set
tings
Yes
Rep
lace
MB
boa
rd
8-E
BDP-BX1/S350
US
B D
evic
e Fl
ow
US
B d
evic
e is
not
reco
gniz
ed
EX
T di
spla
y ap
pear
s on
the
FLD
No
EX
T ap
pear
s w
hen
turn
ing
on/o
ff th
e po
wer
No
EX
T ap
pear
s w
hen
rein
serti
ng m
emor
y an
dtu
rnin
gpo
wer
on/
off
No
To F
L/FR
Flo
w
Yes
Yes
Yes
Not
reco
gniz
ed a
fter i
nser
ting
mem
ory
(CU
E)
Mem
ory
not c
ompl
etel
y in
serte
d
Vol
tage
of p
in 2
of U
SB
boa
rd C
N36
1 is
5V
No
Che
ck h
arne
ss b
etw
een
US
B b
oard
and
MB
boar
dY
es
Per
form
US
B te
st o
f the
ser
vice
mod
e
9-
BDP-BX1/S350SECTION 9
REPAIR PARTS LIST
9-1. EXPLODED VIEWS
9-1-1. CASE SECTION
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 X-2188-516-1 COVER ASSY, TRAY 2 X-2188-515-1 PANEL ASSY, FRONT (S350) 2 X-2318-471-1 PANEL ASSY, FRONT (BX1)
IC001 6-705-337-01 IC TK11150CSCL-G IC002 6-702-630-01 IC AK4382AVTN-E2 IC008 8-759-656-83 IC NJM4580MD-(TE2) IC202 6-702-302-01 IC TK11133CSCL-G IC205 8-759-667-17 IC L79M05TLL-SONY-TL-E
IC206 6-712-336-01 IC NJM2564AV (TE2)
< JACK >
J001 1-815-894-11 JACK, PIN (2P) (LINE OUT (AUDIO L/R)) J201 1-793-483-11 PHONO JACK 3P (COMPONENT VIDEO OUT
(PR/PB/Y)) J202 1-780-641-11 JACK BLOCK, PIN (LINE OUT (S VIDEO/VIDEO))
R001 1-216-833-11 METAL CHIP 10K 5% 1/10W R002 1-216-833-11 METAL CHIP 10K 5% 1/10W R003 1-216-830-11 METAL CHIP 5.6K 5% 1/10W R004 1-216-809-11 METAL CHIP 100 5% 1/10W R005 1-216-809-11 METAL CHIP 100 5% 1/10W
R006 1-216-809-11 METAL CHIP 100 5% 1/10W R007 1-216-809-11 METAL CHIP 100 5% 1/10W R008 1-216-809-11 METAL CHIP 100 5% 1/10W R009 1-216-830-11 METAL CHIP 5.6K 5% 1/10W R010 1-216-833-11 METAL CHIP 10K 5% 1/10W
R012 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R013 1-216-841-11 METAL CHIP 47K 5% 1/10W R014 1-216-845-11 METAL CHIP 100K 5% 1/10W R015 1-216-821-11 METAL CHIP 1K 5% 1/10W R016 1-216-817-11 METAL CHIP 470 5% 1/10W
R017 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R030 1-216-833-11 METAL CHIP 10K 5% 1/10W R040 1-216-833-11 METAL CHIP 10K 5% 1/10W R044 1-216-833-11 METAL CHIP 10K 5% 1/10W R062 1-218-709-11 METAL CHIP 5.1K 0.5% 1/10W
R063 1-218-709-11 METAL CHIP 5.1K 0.5% 1/10W R064 1-218-709-11 METAL CHIP 5.1K 0.5% 1/10W R065 1-218-709-11 METAL CHIP 5.1K 0.5% 1/10W R076 1-218-710-11 METAL CHIP 5.6K 0.5% 1/10W R077 1-218-710-11 METAL CHIP 5.6K 0.5% 1/10W
R086 1-218-674-11 METAL CHIP 180 0.5% 1/10W R087 1-218-674-11 METAL CHIP 180 0.5% 1/10W R096 1-218-674-11 METAL CHIP 180 0.5% 1/10W R097 1-218-710-11 METAL CHIP 5.6K 0.5% 1/10W R106 1-218-710-11 METAL CHIP 5.6K 0.5% 1/10W
R107 1-218-674-11 METAL CHIP 180 0.5% 1/10W R116 1-216-817-11 METAL CHIP 470 5% 1/10W R117 1-216-817-11 METAL CHIP 470 5% 1/10W
R126 1-216-841-11 METAL CHIP 47K 5% 1/10W R127 1-216-841-11 METAL CHIP 47K 5% 1/10W
R136 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R137 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R146 1-216-817-11 METAL CHIP 470 5% 1/10W R147 1-216-817-11 METAL CHIP 470 5% 1/10W R148 1-216-845-11 METAL CHIP 100K 5% 1/10W
R158 1-216-295-91 SHORT CHIP 0 R160 1-216-295-91 SHORT CHIP 0 R163 1-216-864-11 SHORT CHIP 0 R164 1-216-864-11 SHORT CHIP 0 R165 1-216-864-11 SHORT CHIP 0
R166 1-216-864-11 SHORT CHIP 0 R167 1-216-864-11 SHORT CHIP 0 R168 1-216-864-11 SHORT CHIP 0 R201 1-216-833-11 METAL CHIP 10K 5% 1/10W R202 1-216-821-11 METAL CHIP 1K 5% 1/10W
R208 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R210 1-216-833-11 METAL CHIP 10K 5% 1/10W R211 1-216-801-11 METAL CHIP 22 5% 1/10W R212 1-216-801-11 METAL CHIP 22 5% 1/10W R213 1-216-801-11 METAL CHIP 22 5% 1/10W
R214 1-216-801-11 METAL CHIP 22 5% 1/10W R215 1-216-801-11 METAL CHIP 22 5% 1/10W R219 1-216-819-11 METAL CHIP 680 5% 1/10W R220 1-216-819-11 METAL CHIP 680 5% 1/10W R221 1-216-819-11 METAL CHIP 680 5% 1/10W
R222 1-216-819-11 METAL CHIP 680 5% 1/10W R223 1-216-819-11 METAL CHIP 680 5% 1/10W R232 1-216-864-11 SHORT CHIP 0 R233 1-216-864-11 SHORT CHIP 0 R234 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R235 1-216-809-11 METAL CHIP 100 5% 1/10W R237 1-218-285-11 METAL CHIP 75 5% 1/10W R239 1-218-285-11 METAL CHIP 75 5% 1/10W R241 1-218-285-11 METAL CHIP 75 5% 1/10W R242 1-218-285-11 METAL CHIP 75 5% 1/10W
R243 1-218-285-11 METAL CHIP 75 5% 1/10W R244 1-218-285-11 METAL CHIP 75 5% 1/10W R260 1-216-864-11 SHORT CHIP 0 R263 1-216-864-11 SHORT CHIP 0 R265 1-216-833-11 METAL CHIP 10K 5% 1/10W
R267 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R268 1-216-864-11 SHORT CHIP 0 R269 1-216-864-11 SHORT CHIP 0
IC402 6-808-320-01 IC R5F212A7SNA01FA IC501 6-707-208-01 IC TK11100CSCB-G IC601 6-702-302-01 IC TK11133CSCL-G IC602 6-711-586-01 IC MP2303DN-LF-Z IC603 6-711-586-01 IC MP2303DN-LF-Z
IC303 6-709-703-01 IC MM3141JNRE IC304 6-705-337-01 IC TK11150CSCL-G IC309 6-710-949-01 IC SN0608006PWPR IC310 6-710-949-01 IC SN0608006PWPR IC702 6-706-487-01 IC TC7SH08FU (T5RSOYJF)
IC703 6-702-302-01 IC TK11133CSCL-G IC704 6-705-337-01 IC TK11150CSCL-G IC803 6-702-302-01 IC TK11133CSCL-G IC901 8-759-598-44 IC TC7WH08FK (TE85R)
R864 1-218-965-11 RES-CHIP 10K 5% 1/16W R865 1-216-295-91 SHORT CHIP 0 R873 1-218-990-81 SHORT CHIP 0 R874 1-218-990-81 SHORT CHIP 0 R875 1-218-990-81 SHORT CHIP 0
R876 1-218-990-81 SHORT CHIP 0 R877 1-218-990-81 SHORT CHIP 0 R878 1-218-990-81 SHORT CHIP 0 R879 1-218-990-81 SHORT CHIP 0 R889 1-218-990-81 SHORT CHIP 0
R890 1-218-990-81 SHORT CHIP 0 R891 1-218-990-81 SHORT CHIP 0 R892 1-218-990-81 SHORT CHIP 0 R893 1-218-990-81 SHORT CHIP 0 R894 1-218-990-81 SHORT CHIP 0
R895 1-218-990-81 SHORT CHIP 0 R896 1-218-990-81 SHORT CHIP 0 R899 1-218-990-81 SHORT CHIP 0 R901 1-218-965-11 RES-CHIP 10K 5% 1/16W R902 1-218-965-11 RES-CHIP 10K 5% 1/16W
R903 1-218-990-81 SHORT CHIP 0 R904 1-218-965-11 RES-CHIP 10K 5% 1/16W R905 1-218-990-81 SHORT CHIP 0 R906 1-218-965-11 RES-CHIP 10K 5% 1/16W R907 1-218-990-81 SHORT CHIP 0
R926 1-218-990-81 SHORT CHIP 0 R927 1-218-990-81 SHORT CHIP 0 R928 1-218-990-81 SHORT CHIP 0 R929 1-218-990-81 SHORT CHIP 0 R930 1-218-990-81 SHORT CHIP 0
R952 1-218-990-81 SHORT CHIP 0 R953 1-218-990-81 SHORT CHIP 0 R954 1-218-990-81 SHORT CHIP 0 R955 1-218-990-81 SHORT CHIP 0 R956 1-218-990-81 SHORT CHIP 0
R957 1-218-990-81 SHORT CHIP 0 R958 1-218-990-81 SHORT CHIP 0 R959 1-218-990-81 SHORT CHIP 0 R960 1-218-990-81 SHORT CHIP 0 R961 1-218-990-81 SHORT CHIP 0
R974 1-218-990-81 SHORT CHIP 0 R975 1-218-990-81 SHORT CHIP 0 R976 1-218-990-81 SHORT CHIP 0 R977 1-218-990-81 SHORT CHIP 0 R978 1-218-990-81 SHORT CHIP 0
R979 1-218-990-81 SHORT CHIP 0
MB-124
9-
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
BDP-BX1/S350
R980 1-218-990-81 SHORT CHIP 0 R981 1-218-990-81 SHORT CHIP 0 R982 1-218-990-81 SHORT CHIP 0 R983 1-218-990-81 SHORT CHIP 0