Batterie Management System (BMS) Battery Management System (BMS) INSTITUT FÜR PROZESSDATENVERARBEITUNG UND ELEKTRONIK (IPE) INSTITUTE FOR DATA PROCESSING AND ELECTRONICS (IPE) Das BMS ist ein eigenständiges Steu- ergerät, das die Überwachung und Sicherheit eines Batteriesystems ge- währleistet. Aufgaben des BMS An/Abschalten der Batterie Zellschutz vor Über/Unterspannung Temperaturüberwachung der Batterie Ladungsausgleich durch „Zell-Balancing“ Schätzung des SOC und SOH Leistungshalbleiter Cu-AVT Eine neue Aufbau- und Verbindungs- technik basierend auf Kupfer-Draht- bondtechnik und Silber-Sintertechnik ist der Schlüssel zu zuverlässigeren und leistungsfähigeren Leistungsmodulen. Gefördert vom BMBF, Projekt: ProPower KIT – University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz Association www.kit.edu The BMS is a self-standing control unit ensuring function and general safety of an electric vehicle battery. Principal tasks of the BMS Connect or disconnect the battery Cell protection against over/under- voltage Temperature control of the battery Balancing of the cells’ charge Estimation of SOC and SOH Power Module in Copper Technology A novel packaging and interconnect technology based on copper wire bonds and silver-sinter die bonding is the key to more reliable and powerful future power modules. Funded by BMBF, project: ProPower