Batería DDEC IV

LTC-7PNLithium-Thionyl Chloride Batteries

The LTC-7PN series was design specifically to be printed circuit board (PCB) compatible. With a low profile,prismatic shape, this battery is unique in the industryand a perfect match for space saving requirements.Available in 3 PCB mounting configurations, these cellsprovide high quality, high energy density, non-positionsensitive solutions to your high density electronics power needs.

TYPICAL LTC-7PN DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES

DISCHARGE TIME (HOURS)

1 mA 10 uA

3.93.83.73.63.53.43.33.23.13.02.92.82.72.62.5

2 4 6 8x 10

8x 100

2 4 6x 1,000

2 4 6 8x 10,00042 6 8

HIGH TEMPERATURE OPERATION AT 75°CTEMPERATURE OPERATION AT 20°CCOLD TEMPERATURE OPERATION AT -20°C

LTC-7PN Product Features

• Manufactured in the USA.

• Low profile, prismatic design.

• Stainless steel construction provides corrosionresistance, hermetic seal and structural integrity.

• Years of low rate continuous use.

• Stand-by use with 80% capacity retention after 15 years at room temperature.

• Highly efficient utilization of valuable board space.

• Wave solderable (limit solder bath exposure toa maximum of 5 seconds).

• High energy density compared to other chemistries.

• No charging circuits required.

• Higher cell voltage allows for fewer cells and high reliability.

• Flat discharge characteristics provide optimum voltage regulation.

• Non-pressurized system allow for high temperature usage.

• Ship unrestricted.

• Underwriters Laboratories recognized component.

Do you have questions concerning:

• What size battery you need?

• What is passivation and its effects?

• What is the maximum rate of this cell?

• Any other technical question?

If so, call our Engineers at (417) 659-9635 for detailed technical information.

LTC-7PN

Lithium-Thionyl Chloride Batteries

Lithium-Thionyl Chloride Batteries

The Power Source, Inc (800) 847-6947 PH (650) 960-3034 Faxe-mail: [email protected] • Web Site: www.the-powersource.com

WE CAN DESIGN TO FIT ANY APPLICATION.Our team of engineers can design any pin configuration required to fit your specialized application. If you don't see a battery configuration you need here, call us and we will begin working on a EPT part number just for you.

Specifications LTC-7PNNominal Open Circuit Voltage, 25°C ............................ 3.67 voltsNominal Working Voltage, 25°C...................................... 3.5 voltsNominal Capacity (350 hr. rate), 25°C .......................... 750 mAHVolume ............ .1625 cu. in.Weight .................... 6.8 GMSOperating Temperature ........

............-40°C to +95°CCase Material:

304 Stainless Steel,Hermetically Sealed (case negative polarity)

Terminal and Support Pins are.030" dia. (solder tinned)

0.40

0.30

POWERLEADS

1.00 1.10

0.30 0.175

0.175

0.6500.250

+

Specifications LTC-7PN-S4Nominal Open Circuit Voltage, 25°C ............................ 3.67 voltsNominal Working Voltage, 25°C...................................... 3.5 voltsNominal Capacity (350 hr. rate), 25°C .......................... 750 mAHVolume ............ .1625 cu. in.Weight .................... 6.8 GMSOperating Temperature ........

............-40°C to +95°CCase Material:

304 Stainless Steel,Hermetically Sealed (case negative polarity)

Terminal and Support Pins are.030" dia. (solder tinned)

.650

.250

+

1.00

.30

.48

.17

.050

.200

Specifications LTC-7PN-S6Nominal Open Circuit Voltage, 25°C ............................ 3.67 voltsNominal Working Voltage, 25°C...................................... 3.5 voltsNominal Capacity (350 hr. rate), 25°C ............................750 mAHVolume .................................................................... .1625 cu. in.Weight .......................................................................... 6.8 GMSOperating Temperature ...................................... -40°C to +95°CCase Material: 304 Stainless Steel, Hermetically Sealed

(case positive polarity)Terminal and Support Pins are .030" dia. (solder tinned)

.650

.17

.250

.25

+

1.00 1.10

SUPPORT PIN

The specifications on this sheetmay be changed

by Eagle-Picher Technologies, LLC,without notice.

Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g)

LTC-7PN 3.5 750 1.00 0.65 0.25 6.8

LTC-7PN-S2 3.5 750 1.00 0.65 0.25 6.8

LTC-7PN-S4 3.5 750 0.65 0.25 1.00 6.8

* LTC-7PN-S5 3.5 750 1.00 0.65 0.25 7.1

LTC-7PN-S6 3.5 750 1.00 0.25 0.65 6.8

** LTC-7PN-SM-S1 3.5 750 1.00 0.65 0.25 6.8

* Supplied with Molex connector ** Surface Mount (Reflow soldering not acceptable)